Meter Jobs in Usa

The UGE Foreman leads the crew to complete daily tasks related to the construction and maintenance of underground power lines, from plant/station to meter base, auxiliary facilities, and equipment for the distribution of electricity. They read blueprints of projects and are responsible for production. This position oversees the Line team, ensures crew safety, and collaborates with personnel from other departments.

Obtain all the necessary materials for the job, and ensure all permits and licenses are in place. Oversee work related to each project and assume full responsibility for its quality and timeliness. Compliance with proper safety standards, procedures, and work practices according to MasTec or the customer, whichever standard is higher. Facilitate daily toolbox talks and weekly safety inspections. Disseminates information and ensures understanding of safety briefings. Coordinate and supervise daily tasks for crew members related to digging and placing product. Perform switching procedures to isolate and insulate, splice, and terminate underground power lines following proper safety procedures. Provide for connecting and disconnecting, installing and removal, moving and transferring of various electrical devices on customers facilities, i.e., transformers, transformer banks, regulators, switches, switching devices, capacitor banks, etc. Properly phase and mark/tag underground equipment. Drive, haul, and/or operate equipment to/from job sites to assist crews in completion of work. Train new hires and trainees to learn the trade. Call in utilities located at each project site.

Minimum high school diploma, or equivalent. 3 years of experience operating heavy equipment and general construction. 2 years of supervisory experience. Class A Commercial Driver's License (CDL) is required. Preferred 6 or more years of experience, including extensive experience supervising and training skilled labor.

This job operates in a field environment. This role routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting. Also, working in inclement weather conditions, such as extreme heat, extreme cold, rain, ice, snow, and wind. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. This position is physically active, with lifting required. Must be able to bend and lift and carry up to 50 pounds. Clarity of vision at 20 feet or more or 20 inches or less, with the ability to judge distance and space relationships. Precise hand-eye coordination. Ability to identify and distinguish colors.

The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, military or veteran status, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories.

It's fun to work in a company where people truly believe in what they're doing! We're committed to bringing passion and customer focus to the business.

Heniff Transportation provides best-in-class supply chain solutions to our valued customers by utilizing our network of supply chain services and resources. We focus on creating extraordinary growth and value across the markets, industries, and customers we serve through outstanding safety, innovation, and service performance. We accomplish this through one of the largest, fully integrated networks of terminals, transload and tank wash facilities in North America and now in Canada. We strive to be the BEST at everything we do.

Position Summary

The position is responsible for the performance of tasks associated with the cleaning of hazardous, non-hazardous and food grade tanker trailers, on-site remediation, clean-up, equipment de-contamination and handling of hazardous materials.

Shift: 1st Shift

Duties and Responsibilities:

• The Tank Wash Technician ensures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all times.
• Operate light and heavy equipment including but not limited to pumps, compressors, boilers, bobcats, forklift, etc.
• Tank Wash Technician handles various hand tools and powered industrial tools, including pressure washers.
• Ensure proper use of equipment and immediately notify supervisor of any mechanical failure or problem of equipment.
• Tank Wash Technician adheres to and ensure compliance with Health & Safety Compliance and regulations.
• Wear and properly use a variety of Personal Protective Equipment (PPE) when required.
• Tank Wash Technician assists in field sampling activities and calibration of meters.
• Perform additional duties as assigned.
• Tank Wash Technician reports directly to The Tank Wash Manager.

Job Requirements

Education and Experience:

• High school diploma, GED, or equivalent
• Six or more months industry-related experience

Preferred Qualifications:

• Experience with confined space entry (CSE) training
• Experience with Department of Transportation (DOT) regulations, Environmental Protection Agency (EPA) waste codes, manifesting and Land Disposal Restrictions (LDR)
• Knowledge of cleaning chemicals
• Ability to complete computer module safety training program including on the job training

Essential Qualifications:

• Solid communication skills and attention to detail
• Demonstrated ability to work with little supervision
• Proven skill to be flexible and adapt to change
• Strong customer service orientation; ensure needs and deadlines are met in a timely fashion
• Demonstrate a positive, proactive and motivated attitude
• Proven focus on continuous improvement in the workplace
• Ability to adapt to change in a fast-paced organization
• Must be 18 years of age or older

Language Skills:

• Ability to read, write and speak English proficiently

Physical Demands:

• While performing the duties of this job, the employee is regularly required to talk or hear.
• May be required to stand, walk, sit, use hands to feel; reach with hand and arms, and stoop, kneel or crouch as needed.
• Required to lift and/or carry up to 50 lbs.
• Climb ladders and or stairs for cleaning duties.
• Work extended (> 8 hrs.) time periods.
• Specific vision requirements include the ability to see at close range, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
• The position requires frequent draining into and carrying of buckets.
• The position is responsible for connecting and disconnecting of hoses.
• This position requires frequent pressure washing.
• Perform non-permit confined space entries for inspections and sometimes cleaning.
• This position requires frequent repetitive motion of operating a manual chain fall.
• Perform parts removal and replacement on customer's equipment.
• Perform proper selection of cleaning methods for the products that are cleaned.
• Perform routine maintenance and emergency repairs of cleaning equipment.
• Monitor the strengths of cleaning solutions.
• Ability to operate in a constant state of alertness and safe manner

Work Environment:

• Work in various temperatures indoors and outdoors in all weather conditions: including extreme heat and cold while wearing various levels of personal protective equipment.
• Work with cleaning chemicals and wear appropriate PPE for the environment.
• Work in potentially elevated noise levels, confined spaces, including lifting in areas of low clearance. Working at elevations including working from ladders and scaffolding up to eight feet above ground.
• Periodically perform work in other areas of the facility as directed by the Shift Leader or Facility Management.
• This position couples and uncouples tractors/trailers.
• This position drives a yard tractor, moving units to specified areas.

Excellent Benefits Package:

• Medical, Dental, Vision, Life, and Disability Insurance
• 401(k) Plan + Company Match
• Paid Time Off
• Company Paid Holidays

Salary Range:

The pay rate for this position is $19.00 hourly. This range is based on market data and internal equity. The final offer will be determined by various factors, including the candidates experience, education, skills, qualifications, and geographic location.

The Heniff Family of Companies, we believe our biggest asset is our people. We are proud to be an equal opportunity employer, hiring and developing individuals from diverse backgrounds and experiences to add to our collaborative culture. Heniff treats all candidates and employees with respect and does not discriminate in our recruiting, hiring, and promoting processes and general treatment during employment, including on the basis of actual or perceived race, creed, color, religion, sex, age, sexual orientation, gender identity and/or expression, alienage or national origin, ancestry, citizenship status, marital status, veteran status, or disability.

• Analyzes diagnostic information and utilizes technical expertise to diagnose and repair/replace failed components based on manufacturer's system design specifications
• Provides technical information as needed for further diagnostic work, project planning, etc.
• Provides some base installation services and replacement of hardware components
• Follow provided work instructions and adheres to daily administrative tasks

• Knowledgeable in manufacturers' system design and specifications
• Able to diagnose, repair and replace computer system hardware components
• Able to effectively utilize associated tools, meters, adaptors, and other equipment
• Clear and proficient communication skills for interactions with customers, technical support teams, support groups (OEM, TD) et al.
• 1-2 Years of relevant work experience
• Experience and expertise in diagnosing, replacing and testing various computer systems and components. This includes, but not limited to, experience with computer systems, operating systems, cabling standards, data center equipment, networking hardware, server platforms, universal power supplies, cable dressing and labeling.
• Other Education / Certifications: CompTIA A+ or Network+ certification or other OEM certifications
• Must be able to drive a motor vehicle.

• Local and Long-Distance Driving
• Ability to work in low to the ground and or confined areas without restrictions
• Ability to climb and work on a ladder.
• Examples: under desks, counters, kiosks or checkout stands.
• Ability to consistently bend, squat and twist without restriction.
• Ability to drive/sit for long periods of time and travel on an airplane.
• Standby rotation and after-hours availability.
• Ability to lift up to 50 LBS unassisted.

• Elective Benefits: Our programs are tailored to your country to best accommodate your lifestyle.
• Grow Your Career: Accelerate your path to success (and keep up with the future) with formal programs on leadership and professional development, and many more on-demand courses.
• Elevate Your Personal Well-Being: Boost your financial, physical, and mental well-being through seminars, events, and our global Life Empowerment Assistance Program.
• Diversity, Equity & Inclusion: It's not just a phrase to us; valuing every voice is how we succeed. Join us in celebrating our global diversity through inclusive education, meaningful peer-to-peer conversations, and equitable growth and development opportunities.
• Make the Most of our Global Organization: Network with other new co-workers within your first 30 days through our onboarding program.
• Connect with Your Community: Participate in internal, peer-led inclusive communities and activities, including business resource groups, local volunteering events, and more environmental and social initiatives.

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

This position is responsible for the research, design, development and sustainability of electronic medical equipment. This individual serves as electrical engineer in a project team. As a key member of the project team, the engineer will collaborate closely with engineers and a cross-functional team to support the full product lifecycle.

Job Responsibilities and Essential Duties

• 
  
• Provide electrical technical in the research, design, development and sustainability of electronic circuits for medical devices. Ensure and maintain compliance to Corporate and Industry standards.
  
• Performs medical devices electrical system requirement study and functions research, participates in design & development activities, collaboration with contractors defining interface, power consumption and board dimensions.
  
• Programs bare metal coding for system control, performs design activities using EDA tools like OrCAD for schematics capture and PCB layout, generate circuit schematic diagrams, bills of materials and performance analyses, works with contractors for PCB fabrication and SMT, brings up PCB in the lab with tools like multimeter, oscilloscope.
  
• Perform system assembly, function testing, data analyzing, and test results documenting.
  
• Prepare documents including Design Specifications, Verification and Validation protocols/reports, relevant Risk Analysis.
  
• Support design reviews and contribute to risk assessments and design verification activities.
  
• Remote and Onsite electrical technical support as needed by the project.
  

Minimum Requirements

• 
  
• B.S. in Electrical Engineering, M.S. preferred.
  
• Minimum 0-2 years related experience
  

Required Knowledge, Skills, and Abilities

• 
  
• Deep understanding principles of DC regulators, such as LDO, Switching regulators.
  
• Knowledge of microcontroller hardware design and firmware coding, sensor interfaces such as SPI, I2C.
  
• Experience with EDA tools (OrCAD, Altium Designer, KiCAD etc.) design for schematic capture, PCB layout.
  
• Strong lab skills, including experience with oscilloscopes, multi-meter, and other diagnostic tools.
  
• Ability to work effectively in a cross-functional team environment and take direction from project leaders.
  
• Structured problem solving / root cause analysis.
  
• Ability to communicate within the discipline and with others who are not as technically trained.
  
• Strong oral and written communication skills
  
• Ability to prioritize tasks in a fast-paced environment.
  
• Knowledgeable using Adobe and Microsoft Office products such as Outlook, Word, Excel and PowerPoint.
  
• Annual Salary of 97K-107K depending on experience
  
  #LI-JF1 #LI
  

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

Description

At Lactalis USA, we believe in promoting from within and giving our employees meaningful opportunities to learn, grow, and thrive. Whether you're just starting out or bringing years of experience, we'll provide the tools and support you need to succeed.

Lactalis is the world leader in dairy-a family-owned company with over 85,000 pragmatic and ambitious professionals across the globe. Every day, we're proud to produce award-winning dairy products that bring people together every day.

In the US, we offer an unrivaled house of beloved brands, including Galbani Italian cheeses and ricotta, President specialty cheeses and butters, Kraft natural and grated cheeses, Breakstone's cottage cheese, Cracker Barrel, Black Diamond cheddar, and Parmalat milk. Our yogurt portfolio includes siggi's, Stonyfield Organic, Brown Cow, Oui, Yoplait, Go-Gurt, :ratio, Green Mountain Creamery, and Mountain High, along with sour cream and a growing family of ethnic favorites like Karoun, Gopi, and Arz.

At Lactalis, we live by our core values-Ambition, Engagement, and Simplicity. We're building a workplace where innovation thrives, diverse perspectives are celebrated, and everyone's unique background and ideas are valued.

Even if you don't meet every qualification, we encourage you to apply. We want to hear about your PASSION, your STORY, and how your EXPERTISE can help us make an impact.

From your PASSION to ours:

Summary: Responsible for the production of high-quality consistent product and correct kettle/processor formulation.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

Essential Duties and Responsibilities include the following. Other duties may be assigned.

1. Produces high quality products in a consistent manner.

2. Ensure proper volumes of each raw material are entered into the kettles/processors.

3. Ensures proper pH is achieved in all kettles/processors.

4. Appropriately monitors and controls drain speeds.

5. Ensures proper moistures have been reached by checking moisture of every lot prior to sending it to packaging.

6. Maintains all proper documentation including recording charts, cheese-making log sheets, etc.

7. Inform supervisor of any production issues.

8. Ensures proper sampling of raw material, preblend, and whey.

9. Cleans and sanitizes equipment and lines.

10. Ensures homogenizers are at proper pressures.

11. Documents mass meter numbers where necessary.

12. Maintains a clean and sanitary work area.

13. Is aware of and practices Plant's Good Manufacturing

14. Practices (GMP) as well as Good Sanitation Practices (GSP).

15. Upholds all rules pertaining to confidentiality of information regarding Sorrento products and recipes

Requirements

From your EXPERTISE to ours:

Key responsibilities for this position include:

Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

* Previous food manufacturing experience preferred.

* Ability to perform a multitude of tasks.

* Strong communication abilities, written and verbal.

* Knowledge of computer software preferred: Work, Excel, Power Point.

Education and/or Experience:

* High School Diploma/GED required.

* Associate degree in Dairy Science/Chemistry preferred.

At Lactalis, we offer a comprehensive Total Rewards Program with a variety of affordable benefits and coverage options. We support insurance costs significantly, contribute generously to retirement plans, and offer Paid Time Off from day one. We are committed to your professional growth, providing training and development opportunities, including Education Reimbursement. Join us and grow your career.

Lactalis is an equal employment opportunity employer. We will not discriminate against applicants with regard to any legally-recognized basis including, but not limited to: veteran status, race, color, religion, sex, national origin, age, marital status, sexual orientation, and physical or mental disabilities.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Rochester, NY

SUMMARY: A program designed to train a skilled worker through a combination of on-the-job training and classroom instruction to become a Maintenance Technician at American Packaging Corporation. Maintenance Technicians are responsible for electrical and mechanical systems in the facility, which will include troubleshooting and routine maintenance activities. Throughout this program, they will learn to troubleshoot and repair equipment problems that affect productivity of the manufacturing group as well as plant facilities and subsystems. They will learn to be involved with the process improvements providing input in production problem solving.

Approval Process: Applicants will be interviewed and chosen based on their experience, knowledge, and overall work history. The chosen finalists will be required to take and pass an aptitude test.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

Duration: 3-4 years for completion

Classroom Training: Several courses required through local school, such as Electrical, Industrial, Mechanical and Machining courses.

Hours of Work: As needed for class schedule, must be flexible.

On the Job Training:

A. Tool and Supply Room (~200 hrs)

Learn size of wire conduit and bending of conduit, use of tools and how to determine the size of load safety.

B. Lighting (~200 hrs)

Replacement of incandescent lamps and hot cathode fluorescent tubes and starters. Repair of fluorescent fixtures, replacing ballast, socket and wiring, code requirements. Repair of LED fixtures, replacing drivers and troubleshooting.

C. Trouble Shooting AC Wiring (~300 hrs)

Learn to locate and repair contactor problems, replacing contacts and contactor. Locate and replace blown fuses. Check and repair limit switches, push buttons, etc.

D. Special Circuits AC (~500 hrs)

Learn to read wiring diagrams. Operation of special control circuits, time delay switches, electrical braking.

E. Direct Current Machinery (~500 hrs)

Learn to locate and repair direct current motor troubles in fields, armatures, bearings, brush holders, and commutators. Knowledge of variable speed DC drives. Repair and maintenance of DC contactors and field control.

F. General Wiring (~500 hrs)

Learn proper handling and installation of power feeding, wiring, fuse panels, breakers, etc. Estimate load requirements. Code requirements. Install general wiring.

G. Instruments (~100 hrs)

Learn proper use and care of voltmeter, ammeter, watt meter, oscilloscope and megger, etc.

H. Computerized Controls (~600 hrs)

Programmable logic controllers: reading diagrams and schematics; maintaining and troubleshooting.

I. Care, Use and Safety of Tools and Equipment (~500 hrs)

Hand tools, power tools, machines and power equipment, ladders, scaffolding and hoists.

J. Machine Repair (Mechanical) (~1500 hrs)

Assembly and disassembly, bearings, power transmission, construction, rigging, lubrication. Safety.

K. Bench Work and Machinery (~300 hrs)

Lathes, milling machines, grinding machines, drill press, power saw, etc. Safety.

L. Pipefitting (~300 hrs)

Layout, installation, repair, replacement, pumps and compressors, valves and controls. Safety.

M. Welding (~500 hrs)

Protective clothing and equipment, burning and cutting, controls and gauges, electric arc welding, properties of metals. Safety.

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

High School Diploma or Equivalent. Active, regular Full-time employee of American Packaging Corporation. Part-time or temporary employees of APC are not eligible to participate in this program.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, technical procedures, or instructions. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from others.

MATHEMATICAL SKILLS

Ability to calculate figures and amounts such as proportions, percentages, area, circumference and volume. Ability to apply concepts of basic algebra and geometry.

REASONING ABILITY

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand, walk, sit, and talk or hear. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include color vision.

WORK ENVIRONMENT

While performing the duties of this job, the employees is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

Scope of Job
PowerFlex, an EDF power solutions company, is a leading national provider of intelligent onsite energy solutions that support cost-effective and low-carbon electrification and transportation. We deliver integrated solar, storage, EV charging, and microgrid systems, to businesses and organizations. As a single full-service provider, PowerFlex customizes clean technology solutions to help clients achieve their energy and sustainability goals. Through the comprehensive PowerFlex X platform, based on proprietary technology, PowerFlex leverages patented smart software to control, monitor, and optimize a client's distributed energy resources to reduce cost and maximize return on investment. Our technology is deployed at scale to prominent commercial customers such as Adobe, DHL, Prologis, Target, and municipalities such as County of LA. PowerFlex is a top 5 provider in each of Commercial Solar, Storage and EV Charging in the US.

PowerFlex isseekinga highly skilled Solar Technical Lead to support the technical performance, reliability, and safe operation of a growing portfolio of distributed energy assets. This role sits within the Asset Optimization & Customer Success organization and focuses on deep technical fieldexpertiseacross commercial and industrial (C&I) solar PV sites.This individual will play a key role in ensuring successful system troubleshooting, performance verification, and vendor coordination. The ideal candidate has extensive handson experience on solar sites, strong understanding of PV system components, and the ability to work directly with subcontractors, OEMs, and internal teams to resolve technical issues andmaintainoptimalsite performance

Location
This role is open to be a hybrid role out of one of our offices (Mountain View, CA,San Diego, CA orNew York, NY.)

Responsibilities

• Performhands-ontechnical support for PV operations, including system monitoring, troubleshooting, performance analysis, and field diagnostics.
• Conduct detailed technical reviews of site issues, alarms, performance anomalies, and equipment failures; performroot causeanalysis and implement corrective actions.
• Interface directly with vendors, equipment manufacturers, and subcontractors to address technical issues, coordinate warranty/RMA processes, and ensure adherence to installation standards and specifications.
• Support development, implementation, and improvement of technical processes and field procedures (e.g., commissioning checklists, testing protocols, safety documentation).
• Ensure all work meets OSHA, NEC, and AHJ requirements and follows PowerFlex safety protocols and quality standards.
• Review and validateas builtdrawings, test reports, commissioning packages, and other technical documentationrequiredfor operations readiness.
• Assistwith system monitoring and diagnostics, including alarm triage, remote troubleshooting, and performance data review.
• Providetechnical insight into operational performance metrics such as availability, uptime, production vs. forecast, and degradation analysis.
• Support subcontractor qualification and evaluation from a technical standpoint, including verification of workmanship and compliance with installation guidelines.
• Collaborate with the Construction/Commissioning teams to ensure clean and complete project handoffs, includingpunch listclosure and documentation completeness.
• Provide technical input into customer reports, system performance summaries, and internal/external communications.
• Maintain a feedback loop with engineering, procurement, and construction teams to improve hardware selection, vendor performance, and overall productreliabilityEstablishandmaintaina feedback loop with the Execution team to evaluate hardware performance, vendor support quality, and overall product effectiveness

Qualifications
Education/Experience

• Bachelor's degree in Engineeringor related technical field preferred.
• 7+ years of experience in renewable energy, withsignificant timespent in field roles involving construction, commissioning, or technical operations of distributed solar PV systems.
• Strong technical knowledge of PV system architecture, including inverters, protection & controls, EMS/SCADA, site networking, telemetry, metering, and utility interconnection requirements.
• Hands on field experiencestronglypreferred (construction, commissioning, troubleshooting, QA/QC, or similar).
• Experience working closely with subcontractors, OEMs, and field service providers.
• Preference for experience in the field
• Battery Energy Storage System experience is a plus

Skills/Knowledge/Abilities

• Capable of managing multiple projects simultaneously
• Stronghands ontroubleshooting ability across mechanical, electrical, andcontrolssystems.
• Capability to handle multiple technical tasks and site issues simultaneously.
• Clear and concise communication skills, including the ability to translate technical issues intocustomer friendlyexplanations.
• Strong vendor and subcontractor coordination skills with a focus on technical oversight and quality assurance.
• Ability to implement and follow structured technical processes and documentation standards.
• Safety firstmindset with strong adherence to compliance requirements

Compensation
The base pay range for this position is $128,610 - $157,190 annually. The total compensation for this position will include commission. This position is eligible for PowerFlex's comprehensive Health and Welfare plans including but not limited to medical, dental, vision, 401(k) retirement plan and paid time off. PowerFlex's compensation packages carefully consider a candidate's qualifications, experiences, and education in relation to the position.

PhysicalRequirements
Remainingin a seated position. Long hours on the computer keyboard. Prolonged periods of standing and/or walking.Must be able to lift and carry or otherwise move 25 pounds regularly/occasionally.

WorkingConditions
80% oftimeis spent in the office environment,utilizingcomputers (frequent use of various Microsoft software/programs), phones, and general office equipment.20% of time is spent outside of the office visitingvendors'and/or internal customers' sites in addition to attending various conferences and meetings.

----------------------------------------------------------------------------------------------------------------------

Applicant Certification and Acknowledgment

By submitting this application, you are certifying that all information provided is true and complete to the best of your knowledge. You understand that any false, misleading, or omitted information may disqualify you from consideration for employment or result in termination if already employed. You also release the company from any liability resulting from your failure to provide accurate information.

DEI Statement

Our company-wide approach to diversity, equity and inclusion is focused on our workplace, community and business outcomes. We believe Diversity, Equity & Inclusion (DEI) is a key component to our mission of delivering renewable solutions and leading the transition to a sustainable energy future. As such, we strive to become a workplace that is diverse, equitable, and inclusive. Our aspiration is to build a culture of belonging and accountability by creating opportunities for growth and continuous learning to ensure progress.

EEO Statement

PowerFlex is committed to building a diverse and inclusive workplace. We are a proud Equal Opportunity Employer and prohibit discrimination based on age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding, and related medical conditions), and sexual orientation.

Privacy Notice to California Job Applicants

For information on Privacy Notice to California Job Applicants, click here.

Privacy Policy

PowerFlex is committed to protecting the privacy of your personally identifiable information, for more information click here.

Special Accommodation Language

If you require assistance or accommodation while seeking employment with PowerFlex, please contact Human Resources at or . Please note that these communication alternatives are for accommodation requests and not for general employment inquiries.

• 
  
• Analyze rejected electronic assemblies using test equipment, simulators, and troubleshooting methods
  
• Perform board-level diagnostics and determine root causes of product failures
  
• Troubleshoot complex electronic issues and recommend corrective actions
  
• Identify vendor defects vs. process-related defects
  
• Document findings and create detailed failure analysis reports
  
• Record failure data and clearly explain diagnostic conclusions
  
• Work independently and adapt to changing operational conditions
  
• Provide support for factory operations, including occasional weekend work
  

• 
  
• Associate's Degree in Electronics Engineering Technology required
  
• Bachelor's Degree preferred
  
• 1-3 years of experience in electronics troubleshooting or analysis
  
• Strong electronic and mechanical troubleshooting skills
  

• 
  
• Signal Generators
  
• Spectrum Analyzers
  
• Oscilloscopes
  
• Power Meters
  
• Modulation / Audio Analyzers
  

• 
  
• RF knowledge
  
• Ability to read and interpret electronic schematics (preferred)
  
• Experience with 2-way subscriber products (preferred)
  

• 
  
• 100% onsite presence required
  
• Steel-toe boots mandatory
  
• Ability to work in a fast-paced production environment
  

• 
  
• Orientation begins at 6:30 AM
  
• Temporary badge will be provided
  
• Immediate start with contract running through end of the year
  
• 30-minute interview (Google Meet or onsite - candidate preference required)
  

• 
  
• Potential contract extension beyond the end of the year
  
• Exposure to advanced electronics troubleshooting tools and techniques
  
• Opportunity to work in a dynamic manufacturing environment focused on continuous improvement
  

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

Operates independently and cooperates with other Central Metrology Technicians to guarantee precision, dependability, and adherence to established standards for calibrations within Central Metrology Lab Scope.

Calibration: Check, analyze, and recalibrate measurement devices based on established criteria, maintaining accurate readings.

Documentation: Maintain clear, detailed logs of laboratory standards, calibration procedures, test findings, and maintenance carried out to follow quality management systems and external guidelines (e.g., ISO 17025).

Process improvement: Partner with fellow Central Metrology Technicians and Internal Business Partners to advance metrology practices and calibration protocols, spot opportunities for progress, and carry out solutions.

Training: Provide training and guidance as needed to other technicians and internal business partners on metrology and calibration techniques and standard methodologies.

Troubleshooting: Detect and address inconsistencies in process and procedures by conducting root cause analysis.

Works autonomously and collaboratively with other Central Metrology Technicians to ensure precision, reliability, and conformity to defined standards for calibrations within the Central Metrology Lab Scope.

Calibration: Assess, test, and calibrate measurement devices following established standards, maintaining accurate readings.

Documentation: Carefully and thoroughly record all laboratory standards, calibration processes, test outcomes, and maintenance to meet quality management systems and external criteria (e.g., ISO 17025).

Process improvement: Work alongside other Central Metrology Technicians and Internal Business Partners to advance metrology techniques and calibration procedures, detect areas needing improvement, and apply solutions.

Training: Deliver instruction and mentorship as required to other technicians and internal business partners regarding metrology and calibration techniques and standard processes.

Troubleshooting: Detect and address inconsistencies in processes and procedures by conducting root cause analysis.

Adhere to safety protocols and procedures, including the use of personal protective equipment (PPE).

Perform calibrations on a wide range of measuring devices using precision measuring instruments and software, ensuring environmental controls in the lab are adequate before performing calibrations. Detect and communicate any measurement/calibration nonconformities to all interested parties.

Record and document test results, maintenance performed, and any deviations or non-conformities in calibration logs, records, and certificates, ensuring traceability and adherence to quality and regulatory standards.

Coordinate and arrange the servicing of devices alongside other Central Metrology Technicians to enhance lab operational efficiency. Use organizational and time management abilities to handle workloads and schedules efficiently.

Assist in the development and/or update of calibration procedures and documentation in accordance with National, International, or Industry Standards.

Provide technical aid and advice to colleagues and Internal Business Partners.

> Perform calibration of various parameters of gauge types, as approved by procedure training, evidence of competency, and maintaining individual uncertainties in alignment with other calibration technicians

• Dimensional - Hand tools, Hard gauges, Surface Plate Flatness etc.
• Mechanical- Pressure, Vacuum, and Torque
• Electrical - Multimeters, Thermocouples and RTD's
• Chemical - Refractometers, pH Meters, and Conductivity meters etc.
• Sound level meters, Belt tensioners etc.
• Vision Systems
• Coordinate-measuring machine (CMM)

> Strong knowledge of measurement science (metrology)

• Understand contributors and variables that influence the development of an uncertainty budget.

> Ability to read and interpret technical manuals, blueprints, schematics and diagrams

Engage in Intra-laboratory and external laboratory Proficiency tests as needed. Not passing Proficiency tests may lead to corrective or preventative measures, including remedial training and/or restriction from calibrating certain types of gauges.

Attention to detail: Meticulous and precise, with a focus on accuracy.

Problem-solving: Strong analytical skills for troubleshooting and resolving complex issues

Computer skills: Proficiency with calibration software and other computer-based test equipment

Communication: Ability to clearly communicate technical information and work effectively in a team. Collaborate with Plants regarding processes, procedures, and corrective/preventative actions, when gauges are found to be out of tolerance.

Understanding of standards: Experience with quality and regulatory standards (e.g., ISO 17025, ISO 9001)

Associate degree or Certificate from a technical school or military training

ASQ Certified Calibration Technician Certification is a plus.

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.

• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.

• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.

• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!