Meter To, CM Jobs in Usa

Position Title Ambulatory Social Worker CM Landon Center on Aging Position Summary / Career Interest: The Ambulatory Social Work Case Manager has responsibility to provide care/service safely and efficiently for a full range of services to patients of all ages and their families.

Primary role is to collaborate, communicate and facilitate coordination of services as established by the healthcare team and executed by the case manager.

Responsible for the psychosocial assessment of patients, coordination of care and linkage to community resources and providing emotional support to patients and their families.

Ensure appropriate decision makers are informed of and involved in treatment planning.

Apply pertinent state and federal regulations regarding documentation and reporting requirements.

The Social Work Case Manager identifies, monitors, and reports opportunities for quality and performance improvement to the appropriate department.

The Social Work Case Manager takes an active role in performance improvement activities as it relates to their area of assignment.

Responsibilities and Essential Job Functions Accepts responsibility and accountability for achievement of optimal outcomes within their scope of practice.

Follows policies, procedures, and standards; complies with Corporate Compliance program.

Assumes responsibility for risk and safety issues associated with the position.

Takes call as required by the department expectations.

Performs job specific responsibilities and demonstrates accountability for own actions and decisions.

Acquires and maintains knowledge and competence related to the expectations of their position and practices within their scope.

Brings ideas and concerns to supervisor, participates in department decision making.

Maintains current licensure.

Completes psychosocial assessments of patient/family situations including social, psychological, emotional, financial and other related factors to facilitate patients' linkage to resources to support care in the community.Identifies and utilizes all relevant information (medical/nursing needs, social work knowledge base, disease process, knowledge of community resources) to accurately and thoroughly assess the patient's psychosocial situation.

Evaluates psychosocial and medical/nursing information to determine an appropriate social service action/ plan of care.Utilizes social work assessment and input from other team members to formulate realistic recommendations for social work action plan and linkage to resources Participates in interdisciplinary team meetings as needed.

Initiates and participates in family conference to determine psychosocial and community resource needs.

Participates in Care Team meetings by providing relevant and discipline specific information to the entire healthcare team and coordinating any linkage to services on identified areas.

Advocates on behalf of patients and caregivers for identification and access to services.

Advocates for the protection of the patient's health, safety and rights.

Ensures patient choice and consistently supports a patient centered environment.Provides supportive counseling to assist patients/families in adjusting to disability and illness, and for realistic planning for care in the community.

Demonstrates a caring, positive regard for others by clarity of speech, use of understandable terminology and utilizing active listening skills.

Assures prudent utilization of all resources (fiscal, staff resources, environmental, equipment and services) by evaluating the options available.

Demonstrates ability to balance cost and quality to assure the optimal clinical and financial outcomes.

Documents appropriate information in the patient's medical record to ensure communication of patients' psychosocial needs for care in the community.Documentation includes initial contact and follow-up action plan.

Documentation includes psychosocial assessment of patient/family including previous living situations.

Documentation includes telephone calls and meetings with significant others and allied professionals.

Documentation includes all family and/or team conferences.

Documentation includes response to interventions and referrals within 24 working hours.

Contributes to the financial viability of hospitals.Works in partnership with physician and clinic nurses to ensure timely linkage to services.

Utilizes established procedures and appropriate resources in working with third party payors to ensure safe and timely coordination of care.

Participates in the case management activities at assigned site.

Participates in professional development activities.Attends workshops, conferences or seminars suggested by Manager.

Completed the objectives identified on last performance appraisal.

Identifies professional development needs and pursues educational opportunities.

Participates on hospital task forces and committees.

Attends and participates in department meetings.

Acts as a preceptor for new team members.

Assists in training of new team members.

Seeks clinical supervision when needed.

Demonstrates flexibility and teamwork among case management staff members.Assists peers in the event of fluctuating caseloads.

Provides coverage to other clinic areas as needed or as requested by Manager.

Must be able to perform the professional, clinical and or technical competencies of the assigned unit or department.

These statements are intended to describe the essential functions of the job and are not intended to be an exhaustive list of all responsibilities.

Skills and duties may vary dependent upon your department or unit.

Other duties may be assigned as required.

Required Education and Experience Masters Social Work in Social Work from an accredited college or university.

Preferred Education and Experience Experience in a health care setting.

Required Licensure and Certification Licensed Specialist Clinical Social Worker(LSCSW)
- State Board of Behavioral Sciences OR Licensed Masters Social Worker(LMSW)
- State Board of Behavioral Sciences State of Kansas OR State of Missouri Social Work license.

Knowledge Requirements Basic computer skills required.

Time Type: Full time Job Requisition ID: R-48120 Important information for you to know as you apply: The health system is an equal employment opportunity employer.

Qualified applicants are considered for employment without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, ancestry, age, disability, veteran status, genetic information, or any other legally-protected status.

See also Diversity, Equity & Inclusion .

The health system provides reasonable accommodations to qualified individuals with disabilities.

If you need to request reasonable accommodations for your disability as you navigate the recruitment process, please let our recruiters know by requesting an Accommodation Request form using this link .

Employment with the health system is contingent upon, among other things, agreeing to the health-system-dispute-resolution-program.pdf and signing the agreement to the DRP.

Need help finding the right job? We can recommend jobs specifically for you! Create a custom Job Alert by selecting criteria that suit your career interests.

• 
  
• 60% Provides active case management, assesses service needs, develops and coordinates action plans in cooperation with members, monitors services and implements plans, to include member goals. Evaluates outcomes of plans, eligibility, level of benefits, place of service, length of stay, and medical necessity regarding requested services and benefit exceptions. Ensures accurate documentation of clinical information to support and determine medical necessity criteria and contract benefits. Provides telephonic support for members with chronic conditions, high risk pregnancy or other at risk conditions thatconsist of: intensive assessment/evaluation of condition, at risk education based on members' identified needs, provides member-centered coaching utilizing motivational interviewing techniques in combination with reflective listening and readiness to change assessment to elicit behavior change and increase member program engagement.
  
• 20% Performs medical or behavioral review/authorization process. Ensures coverage for appropriate services within benefit and medical necessity guidelines. Utilizes allocated resources to back up review determinations. Identifies and makes referrals to appropriate staff (Medical Director, Case Manager, Preventive Services, Subrogation, Quality of care Referrals, etc.). Participates in data collection/input into system for clinical information flow and proper claims adjudication. Demonstrates compliance with all applicable legislation and guidelines for all regulatory bodies, which may include but isnot limited to ERISA, NCQA, URAC, DOI (State), and DOL (Federal).
  
• 10% Participates in direct intervention/patient education with members and providers regarding health care delivery system, utilization on networks and benefit plans. May identify, initiate, and participate in on-site reviews. Serves as member advocate through continued communication and education. Promotes enrollment in care management programs and/or health and disease management programs.
  
• 5% Maintains current knowledge of contracts and network status of all service providers and applies appropriately. Assists with claims information, discussion, and/or resolution and refers to appropriate internal support areas to ensure proper processing of authorized or unauthorized services.
  
• 5% Provides appropriate communications (written, telephone) regarding requested services to both health care providers and members.
  

• 
  
• Set up, understand and proficiently operate all welding equipment.
  
• Troubleshoot various and appropriate machine problems.
  
• ID and tag product with shop orders.
  
• Retrieve/enter data into system.
  
• Ensure quality and proper documentation on all parts.
  
• Maintain components and supplies as required to operate efficiently.
  
• Weld components based on print specifications.
  
• Perform 5S & Continuous Improvement activities.
  
• Other duties as assigned.
  

• 
  
• High school diploma or GED from an accredited institution
  
• A minimum of one year of weld operations, to include MIG, TIG of stainless steel and/or aluminum.
  
• No relocation benefit is being offered for this position. Only candidates that currently reside within the immediate geographical area of Sherman, TX will be considered.
  
• Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
  

• 
  
• Spot-welding experience
  
• Basic computer skills.
  
• Solid math skills; analytical and reasoning skills.
  
• Able to read, interpret blueprints and use simple measuring tools.
  

• 
  
• Ability to lift 50 lbs. alone occasionally to frequently, and up to 100 lbs. with assistance occasionally by stooping, reaching, bending.
  
• Ability to work mandatory overtime, including Saturdays and up to 12 hours in a shift, as needed by the business.
  
• Ability to stand for the duration of the shift (eight to twelve hours) and perform repetitious tasks.
  
• Ability to read blueprints and use simple measuring tools.
  
• Ability to follow directions, work independently and close attention to detail.
  
• Work as part of a team having responsibility for assembling an entire product or component of a product.
  
• Ability to reach, grasp and manipulate-.
  
• Requires PPE to include safety glasses, safety-toe shoes, ear protection, cut resistant sleeves, and any other PPE required by the position.
  
• Environment exposure includes sharp objects, pinch points, oil, sparks.
  

About the Role 

Noble CM Group is seeking an experienced Project Superintendent to lead the full execution of CM-at-Risk projects from preconstruction through closeout. This role is ideal for a construction professional who takes ownership of planning, implementation, coordination, and oversight of all field operations while maintaining strong relationships with Owners, Designers, and trade partners. 

Key Responsibilities 

• Lead all on-site construction operations from project start through final completion 
• Implement Noble CM Group’s CM-at-Risk delivery approach, ensuring alignment with project goals, GMP, and schedule 
• Plan and manage site logistics, phasing, and overall construction sequencing 
• Coordinate trade partners, inspectors, consultants, and Authorities Having Jurisdiction 
• Enforce jobsite safety programs and lead safety planning and compliance 
• Partner with Project Managers during preconstruction, GMP development, buyout, and construction 
• Oversee quality control, inspections, testing, and commissioning readiness 
• Manage punchlist, closeout documentation, and project turnover 
• Serve as Noble CM Group’s primary on-site representative with Owners and Design Teams 

Qualifications 

• 7+ years of commercial construction field experience 
• 3+ years in a Superintendent or senior field leadership role 
• Experience delivering projects using CM-at-Risk or negotiated delivery models 
• Strong understanding of full project lifecycle execution 
• Proven ability to manage multiple trades and complex stakeholder environments 
• Ability to read and interpret drawings, specifications, and construction schedules 
• Proficiency with Procore, Bluebeam, and construction management software 
• Strong leadership, communication, and problem-solving skills 

Why Noble CM Group 

• Owner-focused CM-at-Risk delivery 
• Collaborative culture with empowered field leadership 
• Meaningful projects with real accountability 
• Growing firm with long-term advancement opportunities 

Preferred 

• Public-sector or institutional CMAR experience 
• Background in education, municipal, healthcare, or commercial construction 
• OSHA 30 certification (or ability to obtain) 
• LEAN construction experience 

Company Description

CM Red, based in Raleigh, NC, specializes in turnkey concrete contracting services tailored for commercial, industrial, and pharmaceutical construction projects. The company is also a leader in structural repair, offering high-quality and efficient solutions. CM Red is recognized for its expertise in delivering durable and precise concrete construction. Working with CM Red provides the opportunity to contribute to innovative projects and be part of a dedicated team in the construction industry.

GENERAL DUTIES & RESPONSIBILITIES

Field Responsibilities:

§ Have a full understanding of the contracted scope of work and related scopes of work for assigned projects.

§ Have full knowledge of the plans and specifications for assigned projects.

§ Contribute to, execute, and follow project schedules.

§ Supervise daily concrete activities for projects.

§ Enforce jobsite safety to comply with all OSHA regulations and the company’s safety policies.

§ Prepare daily logs, three-week look-ahead schedules, pour logs, safety logs, QC forms, daily meetings, Job Hazard Analysis and project planning

§ Set priorities and coordinate work activities with other disciplines and Subcontractors to ensure task completion.

§ Layout – check accuracy of layout for embeds, anchor bolts, grades, block outs and any other items for the concrete and related components.

§ Assess workforce, material, tool, and construction equipment needs and make arrangements for these components to support the needs of the project.

§ Assess the work environment for hazardous conditions and assure the field employees are provided proper training, PPE and equipment to accomplish the task prior to starting the activity.

§ Analyze productivity trends and adjust work activities to optimize production.

§ Use defined processes and past experience to implement work-around and recovery plans for solving routine problems.

§ Ensure work is installed per the requisite quality standards.

§ Supervise training for layout, proper forming techniques and production, job assignment, promotion, transfers, layoffs, and terminations for field personnel in accordance with company equal employment opportunity guidelines.

§ Manage personnel development and activities to maximize efficiency of workforce, including adding or removing manpower as appropriate to the project’s activities.

§ Provides Time and Material change information acknowledged by appropriate parties.

Project/Construction Management:

§ Aid Project Management and Construction Management in the preparation of labor, budgets and schedules for project startup and completions.

§ Review cost reports and projections and take appropriate actions to effectively manage job costs to levels within the contract budget.

§ Provide backup for pending change and work orders, and keep the project plans as-built log current.

§ Review materials lists for compliance to contract documents and confirm lead times to ensure timely deliveries to the job site.

§ Ensure proper material/labor quantity tracking of field reports, concrete pour cards acknowledged by the GC, verification of deliveries, vendor invoices, delivery tickets, and pour cards to the PM.

§ Assist with preparing monthly invoicing by verifying quantities for estimated work in place.

§ Maintain equipment and material delivery logs as directed by the Project Manager.

QUALIFICATIONS

Education and Experience

§ Field and related work experience working as a carpenter, field engineer, or assistant superintendent.

§ Minimum five (5) years in a construction-related or other relevant technical position.

§ Undergraduate/Associate's degree in civil engineering, construction management, or other relevant technical discipline preferred.

Knowledge and Skills

·     Able to prioritize job duties and manage time easily, holding strong organizational skills and close focus on details.

·     Can successfully work independently, collaboratively in a team setting, and in a leadership role.

·     Ability to work well under pressure, adapt to change, and problem-solve effectively while maintaining a positive attitude.

·     Bilingual English/Spanish is preferred

·     Can comfortably interact with clients, suppliers, coworkers, etc. in a professional manner

·     Must be a self-starter and take initiative in all aspects of the job

Licenses and Certifications

§ Must have a valid driver’s license

§ 30-hour OSHA card or ability to obtain within 30 days

PHYSICAL DEMANDS

§ The physical demands described here represent those that must be met by an employee working on a construction site to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

§ While performing the duties of this job, the employee is frequently required to stand, walk, use hands to handle/operate tools or controls, and reach with hands and arms. You are occasionally required to climb, balance, stoop, or kneel.

§ You must regularly lift and/or move up to 15 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 50 pounds.

§ Specific vision abilities required by this job include distance vision, peripheral vision, depth perception, and the ability to adjust focus.

WORK ENVIRONMENT

While performing the duties of this job, you regularly work in outside weather conditions. You frequently work near moving mechanical parts. You occasionally work in high, precarious places and are occasionally exposed to wet and/or humid conditions, fumes or airborne particles, toxic or caustic chemicals, risk of electrical shock, and vibration.

The noise level in the construction work environment is usually moderate to high.

Note:

This job description is intended to be generic in nature. It is not necessarily an exhaustive list of all duties and responsibilities. The essential duties, functions and responsibilities designated may vary based on the specific tasks assigned to the position.

Pelstar LLC isan ISO 13485 and ISO 9001-certified manufacturer of Class I medical devices under the Health o meter Professional and Bridge Healthcare brands. We are seeking a motivated quality professional to own and lead quality and regulatory as the company’s Quality Manager. Our products, trusted across the full continuum of care—from physician offices and long-term care facilities to acute care and ambulatory surgery centers—are distributed across North America and extend globally into South America, the Middle East, and Asia.

Role Overview: The Quality Manager serves as the company’s authority for quality and regulatory compliance, operating in close partnership with Engineering and executive leadership. The role holds final quality decision authority for product release, supplier qualification, and process changes. This is a primarily on-site, hands-on leadership role with limited flexibility based on business needs responsible for ensuring effective execution of QMS processes and data-driven quality decisions. This position reports to the head of Engineering, with direct and regular engagement with the CEO/President to ensure alignment on quality and regulatory priorities. The role currently has no direct reports and leverages internal and external support resources to support QMS activities.

Key Responsibilities:

• Serve as FDA Management Representative with final quality decision authority and responsibility for regulatory compliance and QMS effectiveness
• Own, maintain, and continuously improve the ISO 13485 and ISO 9001-certified QMS, including leading audits, CAPAs, and management reviews
• Establish and oversee part and product inspections and release activities, including direct execution as needed and final review/approval of delegated acceptance decisions
• Oversee supplier qualification, monitoring, and compliance with regulatory and quality requirements, and serve as the U.S. Agent for designated foreign suppliers
• Direct and coordinate internal resources, in collaboration with functional leaders, to meet quality and regulatory objectives
• Analyze quality data, trends, and risk using appropriate statistical methods
• Drive quality culture and cross-functional engagement by promoting a customer- and patient-oriented culture (weighEasier®) and communicating quality objectives and risks across the organization
• Travel up to 5%

Required Qualifications:

• Bachelor’s degree required. Engineering, Science, or a related technical field preferred. Additional relevant education is a plus.
• 6+ years of quality/regulatory experience in a regulated environment, including 4+ years in medical devices within a certified quality system (e.g., ISO 13485)
• Demonstrated experience owning quality and/or regulatory processes and final decisions

Preferred Qualifications:

• 10+ years of technical, quality, or regulatory experience in medical devices
• Prior experience serving as FDA Management Representative
• Experience managing team or external vendors with demonstrated independent decision authority
• Strong statistical analysis background – ASQ, RAPS, Lean, or similar certifications preferred
• Experience with similar technologies to existing product families

Compensation and Benefits: We offer a competitive compensation package, including a comprehensive suite of health benefits, tailored to support the wellbeing of our team members and their families.

Location: On-site, McCook, IL 60525

Join Us: We welcome your application. Please send your resume to

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of general and specialized  clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment.  Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Three or more years of equivalent experience performing corrective and planned  maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, 1st Look Cath Lab, CT etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imaging equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes , including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Pay Range 41.43-62.14

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of general and specialized  clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment.  Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Three or more years of equivalent experience performing corrective and planned  maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, 1st Look Cath Lab, CT etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imaging equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes , including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Pay Range 41.43-62.14

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of assigned clinical equipment. 

Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager.  Resolves sensitive or complex problems with supervision. 

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment.  Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provide on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making.  Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc.  Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission,  and NFPA standards as well as state and federal regulations.

Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.

Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.

Must have basic understanding of personal computer operation,  applications, and  ability to input data using a keyboard.  Network training preferred.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.

 Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $31.87 - $47.81 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of assigned clinical equipment. 

Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager.  Resolves sensitive or complex problems with supervision. 

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment.  Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provide on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making.  Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc.  Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission,  and NFPA standards as well as state and federal regulations.

Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.

Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.

Must have basic understanding of personal computer operation,  applications, and  ability to input data using a keyboard.  Network training preferred.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.

 Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $31.87 - $47.81 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.