K2view Tool Jobs in Usa

• 
  
• Reports directly to the Assistant Foreman/Supervisor/Production Lead.
  
• Understands and follows PPE Policy.
  
• Lays out material utilizing drawings and blueprints prior to performing cutting/fitting operations.
  
• Maintains good housekeeping practices, turning off machines when not in use, disposing of waste
  properly, sweeping the area, etc.
  
• Ensures all tools listed on the \"Required Tools List\" are available for use within 30 days of employment.
  
• Acknowledging that all requirements of the Quality Assurance Manual are followed when invoked by
  QA Workbook.
  
• Identifies and notifies Supervisor of unsatisfactory conditions during the production operation.
  
• Fabricates and installs fixtures, jigs, supports and targets to ensure proper alignment during welding processes as directed by the Supervisor/Lead Mechanic.
  
• Basic computer skills.
  
• Assumes responsibility for Contractor (CFM) and Government (GFM) furnished materials.
  
• Ability to use lay-out tools such as tool scales, squares, combination squares, trammel points.
  
• Understands fitting of structural components using dogs, wedges, strong-backs, etc.
  
• Strict adherence to safety, quality standards, good housekeeping habits, high level of critical
  thinking/reading.
  
• Travel and overtime are required.
  
• Work outside specific trade skill as required.
  

• 
  
• Work Experience: Minimum 3+ years of Shipfitter experience.
  
• Understands and performs the setup, and operation of various portable tools and hand tools used in the
  trade including plasma cutting machines and oxy/fueltorches.
  
• Has knowledge of the following: shipboard plate (hull, deck, bulkhead) systems (repair/installation
  practices, procedures, alignments, and material requirements), blueprint reading and interpretation,
  MILSPEC requirements.
  
• Must be able to fit structural components to tolerance requirements.
  
• Tack and Fillet Weld qualifications preferred (FCAW/SMAW).
  
• Must have the ability to gain access to military bases and various government facilities
  

• 
  
• Involves heavy lifting, frequent stooping, bending, crawling, reaching and possible working assignments in
  overhead structures, confined spaces or beneath machinery either indoors or outdoors in the elements and
  noisy conditions.
  
• Occasional lifting 50+ pounds.
  

• 
  
• This position is performed in a traditional office environment with local travel required between facilities.
  
• Work Shift Hours: 6am - 4:30pm (Mon. - Thurs.); overtime potentially on Fridays.
  

Principal Duties/Responsibilities:

* Issues tools, equipment or parts to workers and maintains records issued and returned.

* Locates lost or misplaced tools, equipment or parts.

* Receives, unpacks, and stores incoming tools, equipment or parts, and requisitions stock to replenish inventory.

* Inputs all required data into business operations software, purchasing, and receiving process requirements.

* Inspects and tools, equipment or parts for defects and wear and reports damage or wear to supervisors.

* Keeps all parts clean and orderly in the proper locations.

* Performs clerical activities as directed by manager.

* Participates actively in the weekly and monthly team meetings.

* May interface with purchasing, receiving, and business operations software; repair, service or lubricate tools and equipment; deliver tools or equipment to workers, manually or using handtruck; mark and identify tools and equipment, using identification tag, stamp, or electric marking tool.

Knowledge, Skills, Abilities, & Behaviors Required:

* High school diploma or equivalent (GED) and one year related experience; or equivalent combination of education and experience which provides the required knowledge, skills, and abilities.

Competencies Required:

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.

Russell Tobin's client a semiconductor manufacturing company is hiring a Manufacturing Assemblers in Tualatin, OR.

Job Title: Assembler (Cleanroom / Equipment Assembly)

Location: Tualatin, OR.

Pay Range: $22 - 25/hr.

Shifts:

FEN - 05PM to 05:30 AM Wednesday, Thursday, Friday, and Saturday

BEN - 05PM TO 5:30 AM Sunday, Monday, Tuesday, Wednesday

Morning

FED - 5AM-5:30pm (Sunday wed)

BED - 5AM-5:30PM (Wed-Sat)

Position Summary:

We are seeking a detail-oriented Manufacturing Technician to assemble and install parts and hardware on wafer fabrication equipment (WFE) in a fast-paced, Lean-manufacturing cleanroom environment. This role involves following computer-based work instructions, using hand tools and fixtures, and working collaboratively to meet production schedules.

Key Responsibilities

• Assemble WFE using hand tools, torque wrenches, fixtures, and other equipment.
• Read, interpret, and navigate work instructions, schematics, and Cell Fusion procedures.
• Work effectively in team settings to maintain workflow and meet production timelines.
• Provide flexibility for changing priorities such as rework and pilot builds.
• Verify correct part delivery and perform visual inspection of all components prior to installation.
• Assist with audits by visually inspecting components and verifying checklists.
• Complete assigned tasks by confirming work accuracy, verifying Cell Fusion completion, and providing written descriptions of work performed.
• Maintain consistent alignment with company core values.

Safety Responsibilities

• Complete all required safety training and follow all safe-work practices.
• Lift up to 35 lbs safely and utilize ergonomic tools and pads when needed.
• Follow all cleanroom protocols and use appropriate PPE.
• Adhere to Lockout Tagout policies and procedures (LOTO & ZEST).
• Use hoists, lift tracks, gantry cranes, and other lifting tools as required.
• Perform Risk Management By Walking Around (RMBWA) inspections and report or escalate safety hazards promptly.
• Respond quickly to unsafe practices and escalate unresolved safety concerns to appropriate leadership.

Communication Expectations

• Communicate clearly in English, both verbally and in writing.
• Provide timely updates to supervisors and team members via email, phone, or in person.
• Participate actively in meetings and training sessions.
• Identify and report production issues promptly.
• Suggest process improvements to relevant teams.
• Communicate system status effectively during shift pass-downs.

Physical Requirements

(Requirements vary by site and product type)

• Ability to work 12+ hour shifts in a fast-paced environment.
• Lift and install parts up to 35 lbs.
• Kneel, crouch, squat, and reach into machines frequently.
• Work at a height of ~22 inches from the ground.
• Use manual tools such as wrenches, cutters, and screwdrivers.
• Comfortably climb up to a 10-step ladder.
• Push/pull assembly dollies requiring approximately 40 lbs of force.
• Navigate diagnostic software and distinguish wire colors.
• Maintain a clean, organized workspace.
• Flexibility for changing priorities, overtime, and rework assignments.
• Perform additional duties as assigned by management.

Skills & Qualifications

• Strong attention to detail and commitment to continuous improvement.
• Ability to adapt to change and take initiative proactively.
• Comfortable using computer-based data systems and applications.
• Proficient with Microsoft Office tools (Excel, Word, Outlook, Teams).
• Experience with hand tools including calipers, circuit testers, meters, torque wrenches, ladders/platforms, hoists, and various cutting tools.

Benefits that Russell Tobin offers:

Russell Tobin offers eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors.

Are you a Senior Manufacturing Engineer who enjoys leading improvement projects?

Do you want to join a company invested in automation and process improvement?

We’ve partnered with New Hampshire ball bearings, a Global Precision Machining Manufacturer who are looking for a Senior Manufacturing Engineer to lead key projects, improve legacy processes, and serve as the technical bridge between Design Engineering, Tooling, and Production.

If you’re a Senior Manufacturing Engineer who enjoys owning impactful automation initiatives, modernizing established processes, and seeing your ideas implemented on the shop floor, this is the role for you.

Responsibilities of the Senior Manufacturing Engineer

• Lead manufacturing engineering improvement projects across CNC turning and grinding operations
• Own tooling design reviews, validate tooling specifications, and execute tooling updates using SolidWorks
• Review and optimize legacy process parameters, tooling selections, and machining standards
• Collaborate directly with operators, vendors, tooling suppliers, and Design Engineering to implement process improvements
• Support and contribute to grinding process projects (training provided as needed)
• Identify and evaluate automation and process efficiency opportunities, particularly within grinding workflows
• Provide technical leadership while remaining actively involved in tooling and day-to-day manufacturing processes

Requirements of the Senior Manufacturing Engineer

• Strong background in CNC machining environments, with turning/lathe experience highly valued
• Experience supporting tooling, process optimization, or manufacturability improvement initiatives
• Grinding experience is not required; however, candidates must be willing to learn and lead grinding-related projects
• Bachelor’s degree in Engineering or a related discipline

This is an exciting opportunity for a Senior Manufacturing Engineer to join a rapidly growing company at its state-of-the-art Chatsworth facility, making a meaningful impact through process improvements while benefiting from a tailored career progression plan. Apply today to avoid missing out!

Job Title: PMO Analyst

Department: PMO – Technology & Tools

Location: Philadelphia, PA

Employment Type: Contract-to-Hire

Position Overview

We are seeking a detail-oriented PMO Analyst to support the Technology & Tools team within the PMO. This role is responsible for managing and completing support tickets, performing data entry, and ensuring data accuracy and compliance across PMO systems. The PMO Analyst will serve as a key operational resource by assisting with project setup activities, access requests, and general troubleshooting, helping ensure that project teams have the tools and support they need to operate effectively.

Key Responsibilities

• Review, assess, and complete incoming PMO support tickets in a timely manner.
• Process and manage requests including system access, project setup and shutdown activities, and general support inquiries.
• Perform accurate data entry within PMO tools and systems.
• Maintain and monitor data quality to ensure compliance with internal PMO standards and governance practices.
• Troubleshoot basic system or process-related issues and escalate when appropriate.
• Support project teams by ensuring requests are handled efficiently and documentation is properly maintained.
• Track and document support activities and resolutions within the ticketing system.
• Collaborate with PMO and Technology & Tools team members to improve support processes and workflows.

Qualifications

• 1–3 years of experience in an analyst, operations, or support-focused role.
• Experience working with support ticket systems or service request tools.
• Strong attention to detail and accuracy, especially when handling data entry and documentation.
• Ability to manage multiple requests and prioritize tasks effectively.
• Strong organizational and problem-solving skills.
• Ability to take initiative and work both independently and collaboratively.

Preferred Qualifications

• Familiarity with PMO processes, project lifecycle support, or project administration.
• Experience working with internal support tools, ticketing systems, or workflow platforms.
• Exposure to project management tools or systems is a plus.

Century Aluminum is a global producer of primary aluminum and operates aluminum reduction facilities in the United States and Iceland. Our primary aluminum facilities produce standard grade and value-added primary aluminum products.

This is a full-time position (schedule is TBD), located in Mt. Holly, Goose Creek, SC.

JOB DUTIES

As a Maintenance Electrician, you will be responsible for fabricating, installing, inspecting, testing, operating, repairing and maintaining all types of electrical, mechanical and electronic equipment in a safe and orderly manner as directed by a Maintenance Supervisor.

REQUIREMENTS

• Five (5) years industrial electrical maintenance experience.
• Formal Apprenticeship or equivalent trades training is desirable.
• Vocational or high school graduate or equivalent.

PHYSICAL REQUIREMENTS

The tasks listed are the most physically demanding tasks required of the Maintenance Electrician position.

Standing - worker stands on concrete, rock, dirt or equipment (frequent basis)

Walking - worker is walking on concrete floors, rock, or dirt during the shift (frequent basis)

Strength

• Lifting - required to lift various tools, parts, and equipment such as an electrical testing and measuring equipment, conduit, ladders and scaffolding, vibration analyzers, soldering equipment, metal cutting and forming machines, hoisting and rigging equipment. Some of the equipment can weigh up to 50 lbs. Typically the technician is lifting and carrying power tools, drills and hand tools weighing up to 20 lbs.
• Carrying - carries tool kits and calibrating equipment weighing up to 30 lbs., extension ladders
• Pushing/Pulling - minimal
• Climbing - steel ladders (occasional)
• Balancing - good balance is required during ladder climbing, bucket truck work
• Bending - dependent on the maintenance job being performed; the jobs vary from day to day
• Kneeling - occasional
• Crawling - not required
• Reaching - full ROM of UE required
• Handling- good manual dexterity required in repair of circuits, pumps, motors, and working with hand tools and testing equipment
• Squatting - occasional
• Sitting - occasional

RESPONSIBILITIES

• Must demonstrate the ability to comply with all Century Aluminum and plant PPE requirements and safety protocols.
• Must possess the skills and abilities to work autonomously while conducting routine electrical tasks.
• Familiar with the handling, operation and safe use of all types of electrical equipment including motors, generators, transformers, rectifiers, switches, circuit breakers, relay, control equipment, communication equipment, electronic and fluid controls, power generation, transmission and distribution system, instruments, panel boards, replacement parts and supplies, wire and cable, insulating materials, solder, paint, etc.
• Safe and efficient use of electrical maintenance tools and equipment including electrical testing and measuring equipment. Conduit bending and threading equipment, ladders and scaffolding, vibration analyzers, soldering equipment, metal cutting and forming machines, hoisting and rigging equipment. Hand and power tools common to the trade.
• Read and work from blueprints, sketches, charts, manuals, wiring and schematic diagrams, and other information and instructions. Maintains records and makes reports as necessary.
• Fabricate, install, troubleshoot, dismantle, repair, assemble, inspect, test, maintain, lubricate and operate all electrical and electronic equipment and components, air conditioning equipment, fluid controls, cranes, lighting systems and battery powered equipment.
• Use burning, cutting, welding, soldering, and brazing equipment as required.
• Operate cranes, mobile equipment, and erects and disassembles scaffolding in conjunction with repair work.
• Paint in conjunction with repair work.
• Actively participate in crew and plant safety programs.
• Assist in warehouse parts and inventory control.
• Assist in the upgrade of PM's and lubes through planning.
• Participate in out-of-schedule working hours, i.e.; fill-ins, breakdowns and overhauls.
• Work rotating shifts.
• Maintain job continuity.
• Communicate freely with the technician/supervisor.
• Utilize computer systems, i.e.; daily time entries in Oracle, functions of the CMMS System.
• Continue to upgrade oneself through education/skills associated with their trade.
• Maintain personal and company tools in a safe and usable condition at all times.
• This position reports to a Maintenance Supervisor.

SPECIFIC DUTIES FOR SHIFT MAINTENANCE WORKERS

• Exercise extreme caution while working alone on many tasks
• Assist other maintenance shift workers throughout the plant in repair efforts to minimize call-ins of day shift personnel
• Assist assigned crew with execution of planned activities such as PM's, lubes, or standing work orders as assigned by the maintenance supervisor
• Understand and activate the "Maintenance Help Chain" as necessary to prevent excessive production interruptions
• Prioritize work requests or have the Potline Supervisor prioritize requests in the event of multiple requests simultaneously
• Assess non-routine breakdown situations and recommend necessary resources when help is required
• Provide accurate feedback to the appropriate maintenance personnel regarding turnover information on breakdowns and trouble calls
• Practice established maintenance process techniques at all times, some examples include accurate and detailed information on work orders, applying parts removal tags on rebuild items, immediately return to stock warehouse issues that are not needed, proper coding of emergency work orders, all stock issues are charged to work orders

BENEFITS

• Medical, Dental, Vision, Life, Voluntary Benefits, Disability
• Company-paid holidays
• Accrued vacation
• Employee Assistance Program
• 401K with up to 6% company match
• Onsite Gym
• Wellness programs
• Employee recognition incentives

Environmental, Health & Safety:

This position requires awareness of the Mt. Holly Environmental Policy, Mt. Holly Waste Minimization Policies and Environment, Health and Safety Policy/Principles. must be knowledgeable of the environmental aspects of processes, activities and services in job area and appropriate measures to control impact on the environment.

Support plant policies for waste minimization, demonstrate knowledge of the environmental aspects of the job and effectively employ standard methods to control impact of work on the environment to prevent pollution. Support department environmental objectives and plant environmental goals.

CNC Swiss Machinist

Location: Hudson, NY

Shift: 1st (6 AM - 3 PM)

Industry: Precision Manufacturing / CNC Machining

Employment Type: Full-Time

Position Overview

we are currently recruiting for an experienced CNC Swiss Machinist on behalf of one of our manufacturing clients. This role is ideal for a skilled machinist who can independently set up, operate, and adjust CNC machining centers while maintaining high standards for quality, safety, and productivity.

The successful candidate will work with minimal supervision, interpret complex blueprints, select appropriate tooling, and ensure precision machining of components in a fast-paced manufacturing environment.

Key Responsibilities

• Set up and operate CNC milling machines
• Perform machine adjustments and troubleshoot CNC controllers, tooling, and machining processes
• Read, interpret, and work from detailed blueprints, drawings, and work instructions
• Select appropriate cutting tools, fixtures, and work holding devices
• Set and optimize feeds, speeds, offsets, and tool paths to ensure quality and efficiency
• Perform in-process and final inspection of machined parts using precision measuring instruments (micrometers, calipers, height gauges, etc.)
• Maintain dimensional accuracy and surface finish requirements per print specifications
• Work independently with minimal supervision while meeting production schedules
• Assist with continuous improvement efforts related to machining efficiency and quality
• Maintain a clean, organized, and safe work environment, including machines, tools, and shop floor
• Monitor tool wear and re-order tooling as needed to prevent production downtime
• Follow all company safety policies and quality standards

Qualifications & Requirements

• High School Diploma or GED required
• 2–3 years of hands-on experience in CNC Swiss
• Strong knowledge of CNC machining principles and milling processes
• Ability to read and interpret blueprints and GD&T specifications
• Experience using precision inspection tools for dimensional verification
• Comfortable working independently and taking ownership of assigned machines and jobs
• Ability to lift up to 70 lbs and perform physical tasks associated with machining operations

Seeking an experienced Setup Cold Heading Technician to support production within a high-volume metal forming environment. This role focuses on performing machine setups, tooling changes, and process adjustments on cold heading equipment to ensure parts are produced efficiently and meet quality standards.

The technician will play a key role in maintaining production flow by preparing machines for new jobs, resolving equipment issues, and ensuring finished components meet engineering specifications. This position requires hands-on experience with cold heading equipment, strong mechanical troubleshooting ability, and a commitment to safety and continuous improvement.

Responsibilities

• Perform complete machine setups and changeovers on multi-die cold heading equipment.
• Install, align, and adjust tooling including dies, punches, knockouts, and cutoff components.
• Configure feed systems, timing mechanisms, and forming stations for optimal production.
• Conduct first-piece inspections and verify part quality prior to full production runs.
• Interpret blueprints, job instructions, and technical drawings to ensure proper machine configuration.
• Monitor production output and make process adjustments to maintain dimensional accuracy and quality standards.
• Troubleshoot machine issues such as misfeeds, alignment problems, tooling failures, and dimensional variation.
• Inspect tooling for wear or damage and coordinate repairs or replacements when necessary.
• Use precision measuring instruments including micrometers, calipers, gauges, and optical measuring tools.
• Record setup parameters, inspection data, and production information as required.
• Follow established quality standards and manufacturing procedures.
• Maintain a clean, organized, and safe work environment while following all company safety policies.
• Perform lockout/tagout procedures when conducting setups or machine maintenance.
• Support process improvements aimed at reducing scrap, improving efficiency, and increasing production reliability.
• Communicate effectively with production, quality, and tooling teams to resolve manufacturing challenges.

Qualifications

• High school diploma or GED required.
• 2–5 years of experience working with cold heading equipment or similar metal forming machinery.
• Experience performing machine setups and tooling changes in a manufacturing environment.
• Familiarity with multi-die cold heading machines (National, Sacma, Hatebur, or similar equipment).
• Ability to read and interpret engineering drawings, blueprints, and technical documentation.
• Proficiency using precision measuring instruments such as micrometers, calipers, and thread gauges.
• Strong mechanical troubleshooting and problem-solving abilities.
• Basic computer skills and familiarity with ERP systems and Microsoft Office tools.
• Ability to follow written and verbal instructions and communicate effectively with team members and auditors.
• Strong attention to detail with a focus on product quality and safety.
• Ability to work independently while maintaining productivity and accuracy.

What We Offer:

Competitive hourly compensation + OT

medical, dental, vision insurance

401k plan

PTO + holidays

Relocation support for candidates moving to Minnesota

At a Glance

Company: Precision Castparts Corp.
Location: Garden Grove, CA (On-site)
Job Type: Full-Time
Pay Range: $26.00 – $39.25 per hour (based on experience)
Shift: Days or Afternoons | Monday–Friday 
Overtime: Optional 6 hours Saturday
Experience Level: Mid-Level (2–4 years)
Work Authorization: U.S. Person may be required (ITAR/EAR compliance)
Apply Link: Apply through hireCNC

Why This Role Exists

This role exists to support continued production demand and operational growth across aerospace and industrial manufacturing programs.

At Precision Castparts Corp., this position plays a key role in producing highly engineered, tight-tolerance components used in aerospace, power generation, and energy applications — with a strong focus on quality, consistency, and on-time delivery.

The Work You’ll Be Doing

In this role, you will:

• 
  
• Set up and operate CNC Lathes and automated machining cells (DMG Mori EcoTurn 450, DMG Mori NLX 2500/700, Hardinge, Takisawa)
  
• Prepare fixtures, load tooling, and set offsets for production runs
  
• Load, run, and make basic edits to CNC programs at the machine
  
• Run production and repeat jobs while maintaining quality standards
  
• Perform first-piece and in-process inspections using precision tools
  
• Adjust feeds, speeds, and offsets to maintain tolerances and part quality
  
• Read and interpret blueprints, shop travelers, and work instructions
  
• Verify prior operations are complete before starting new processes
  
• Troubleshoot basic machining or program issues as they arise
  
• Collaborate with supervisors, leads, and quality teams to ensure production goals are met
  

Machines, Controls & Inspection Tools

You’ll work with equipment such as:

Machines:

• 
  
• 2–3 Axis CNC Lathes - DMG Mori EcoTurn 450, DMG Mori NLX 2500/700, Hardinge, Takisawa
  
• Automated Machine Cells
  
• Drilling & Reaming Equipment
  

Controls:

• 
  
• Fanuc
  
• Haas
  
• Mazak 
  

Inspection Tools:

• 
  
• Micrometers
  
• Calipers
  
• Height Gauges
  
• Air Gauges
  
• Bench Inspection Equipment
  

Materials You’ll Work With

• 
  
• Aluminum
  
• Alloy Steel
  
• Stainless Steel
  
• Aerospace-grade alloys
  

What We’re Looking ForRequired:

• 
  
• 1+ years of CNC machining and setup experience
  
• Experience with CNC Lathes
  
• Ability to read blueprints and follow shop travelers
  
• Basic understanding of G & M codes
  
• Experience with setups, tooling, and offsets
  
• Familiarity with inspection tools (calipers, mics, gauges)
  
• Basic shop math (fractions, decimals, measurements)
  
• Ability to read and write English
  
• Safety-focused and reliable
  

Preferred (Not Required):

• 
  
• Experience with multi-axis (3+ axis) machining
  
• Exposure to automated machine cells
  
• Experience in aerospace or high-precision manufacturing
  
• Strong troubleshooting and process improvement mindset
  

Why Machinists Like Working Here

Machinists choose Precision Castparts Corp. because:

• 
  
• Clean, organized, and safety-focused shop environment
  
• Stable, long-term work supporting aerospace and energy industries
  
• Access to advanced machining equipment and technology
  
• Competitive pay and strong benefits package
  
• Opportunities to grow into advanced setup, programming, or leadership roles
  
• Backed by Berkshire Hathaway with strong long-term stability
  

Pay, Benefits & Schedule

Pay Range: $26.00 – $39.25/hr (DOE)

Benefits:

• 
  
• Quarterly Bonus
  
• Medical, dental, vision insurance
  
• 401(k) with company match
  
• 40 hours PTO annually
  
• 10 paid holidays
  
• Life insurance
  

Schedule:

• 
  
• Monday–Friday | Days or Afternoons
  

Overtime: As needed

Apply

Interested machinists can apply directly through hireCNC.
Apply Now or Save This Job to come back later

At a Glance

Company: Precision Castparts Corp.
Location: Gardena, CA (On-site)
Job Type: Full-Time
Pay Range: $26.00 – $39.25 per hour (based on experience)
Shift: Days or Afternoons | Monday–Friday 
Overtime: Optional 6 hours Saturday
Experience Level: Mid-Level (2–4 years)
Work Authorization: U.S. Person may be required (ITAR/EAR compliance)
Apply Link: Apply through hireCNC

Why This Role Exists

This role exists to support continued production demand and operational growth across aerospace and industrial manufacturing programs.

At Precision Castparts Corp., this position plays a key role in producing highly engineered, tight-tolerance components used in aerospace, power generation, and energy applications — with a strong focus on quality, consistency, and on-time delivery.

The Work You’ll Be Doing

In this role, you will:

• 
  
• Set up and operate CNC Lathes and automated machining cells (DMG Mori EcoTurn 450, DMG Mori NLX 2500/700, Hardinge, Takisawa)
  
• Prepare fixtures, load tooling, and set offsets for production runs
  
• Load, run, and make basic edits to CNC programs at the machine
  
• Run production and repeat jobs while maintaining quality standards
  
• Perform first-piece and in-process inspections using precision tools
  
• Adjust feeds, speeds, and offsets to maintain tolerances and part quality
  
• Read and interpret blueprints, shop travelers, and work instructions
  
• Verify prior operations are complete before starting new processes
  
• Troubleshoot basic machining or program issues as they arise
  
• Collaborate with supervisors, leads, and quality teams to ensure production goals are met
  

Machines, Controls & Inspection Tools

You’ll work with equipment such as:

Machines:

• 
  
• 2–3 Axis CNC Lathes - DMG Mori EcoTurn 450, DMG Mori NLX 2500/700, Hardinge, Takisawa
  
• Automated Machine Cells
  
• Drilling & Reaming Equipment
  

Controls:

• 
  
• Fanuc
  
• Haas
  
• Mazak 
  

Inspection Tools:

• 
  
• Micrometers
  
• Calipers
  
• Height Gauges
  
• Air Gauges
  
• Bench Inspection Equipment
  

Materials You’ll Work With

• 
  
• Aluminum
  
• Alloy Steel
  
• Stainless Steel
  
• Aerospace-grade alloys
  

What We’re Looking ForRequired:

• 
  
• 1+ years of CNC machining and setup experience
  
• Experience with CNC Lathes
  
• Ability to read blueprints and follow shop travelers
  
• Basic understanding of G & M codes
  
• Experience with setups, tooling, and offsets
  
• Familiarity with inspection tools (calipers, mics, gauges)
  
• Basic shop math (fractions, decimals, measurements)
  
• Ability to read and write English
  
• Safety-focused and reliable
  

Preferred (Not Required):

• 
  
• Experience with multi-axis (3+ axis) machining
  
• Exposure to automated machine cells
  
• Experience in aerospace or high-precision manufacturing
  
• Strong troubleshooting and process improvement mindset
  

Why Machinists Like Working Here

Machinists choose Precision Castparts Corp. because:

• 
  
• Clean, organized, and safety-focused shop environment
  
• Stable, long-term work supporting aerospace and energy industries
  
• Access to advanced machining equipment and technology
  
• Competitive pay and strong benefits package
  
• Opportunities to grow into advanced setup, programming, or leadership roles
  
• Backed by Berkshire Hathaway with strong long-term stability
  

Pay, Benefits & Schedule

Pay Range: $26.00 – $39.25/hr (DOE)

Benefits:

• 
  
• Quarterly Bonus
  
• Medical, dental, vision insurance
  
• 401(k) with company match
  
• 40 hours PTO annually
  
• 10 paid holidays
  
• Life insurance
  

Schedule:

• 
  
• Monday–Friday | Days or Afternoons
  

Overtime: As needed

Apply

Interested machinists can apply directly through hireCNC.
Apply Now or Save This Job to come back later