Fairlead Jobs in Usa

Essential Duties and Responsibilities:

• 
  
• Read and interpret blueprints, technical drawings, and shop sketches
  
• Set up and operate CNC machines to perform tasks such as drilling, grinding, milling etc.
  
• Use all conventional machine shop equipment and machinery to cut, machine and shape raw materials in accordance with drawing requirements
  
• Build fixtures and various holding devices as needed to hold or support work pieces in process
  
• Analyze job requirements and use best shop practice to meet drawing requirements in the most efficient time
  
• Inspect high precision parts using blueprints and adhering to GD&T tolerances
  
• Supervise multiple machines while they execute the tasks and make any necessary adjustments to tool offsets and G&M code to keep part in tolerance
  
• Use correct feeds and speeds to ensure quality dimensions as well part finishes with different types of materials
  
• Determine tools needed to perform given task and set-up those tools accordingly
  
• Check run out of tools to ensure part will cut on size
  
• Understand tool wear and how to compensate as well as understanding how to prevent tool wear
  
• Set tool offsets and diameter compensation
  
• Set multiple 3-axis work offsets within (1) program
  
• Perform machine set-ups with little to no set up instructions
  
• Edit G&M code on the controller as well as on PC with .TXT documents
  
• Operate forklift as needed
  
• Assemble machined or fabricated components as needed
  

Qualifications:

• 
  
• Proficient in performing machine set-ups with little to no set up instructions
  
• Thorough understanding of measuring instruments, on-the-job use: Tape measure, calipers, OD micrometer, depth micrometer, bore gauges, surface gauge, height gauge, gauge pins, gauge blocks, pitch micrometer, ID micrometer, blade micrometer, thickness gauges, radius gauges
  
• Understand the process to square material up correctly
  
• Proficient in the use of various hand tools as necessary to achieve finish requirements
  
• Ability to effectively use power driven equipment
  
• Understand tool deflection and how to combat it in different types of materials
  
• Understand part flatness and how to achieve flatness with different types of materials
  
• Proficient in proofreading G&M code to ensure no crashes or mistakes occur as well as performing a test run to ensure program outputs are accurate
  
• High mental and visual effort required
  

Minimum Requirements:

• 
  
• 1-3 years experience as a machinist
  
• High school diploma or equivalent
  
• Completion of formal apprenticeship program or completion of in-company, four-year training program
  

Physical Demands:

• While performing these job duties, the employee is routinely required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; use fingers and hands to type or write; reach with hands and arms; talk or hear; taste or smell. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to lift 50 pounds.

Work Environment:

• This position is performed in a manufacturing environment, with some local travel between facilities.

Fairlead Integrated, LLC. and its subsidiaries are proud to be Equal Employ Opportunity and Affirmative Action employers (Minority / Female / Disability / Veterans).

To apply for this position, go here: Employment Application Fairlead Integrated

• 
  
• Reports directly to the Assistant Foreman/Supervisor/Production Lead.
  
• Understands and follows PPE Policy.
  
• Lays out material utilizing drawings and blueprints prior to performing cutting/fitting operations.
  
• Maintains good housekeeping practices, turning off machines when not in use, disposing of waste
  properly, sweeping the area, etc.
  
• Ensures all tools listed on the \"Required Tools List\" are available for use within 30 days of employment.
  
• Acknowledging that all requirements of the Quality Assurance Manual are followed when invoked by
  QA Workbook.
  
• Identifies and notifies Supervisor of unsatisfactory conditions during the production operation.
  
• Fabricates and installs fixtures, jigs, supports and targets to ensure proper alignment during welding processes as directed by the Supervisor/Lead Mechanic.
  
• Basic computer skills.
  
• Assumes responsibility for Contractor (CFM) and Government (GFM) furnished materials.
  
• Ability to use lay-out tools such as tool scales, squares, combination squares, trammel points.
  
• Understands fitting of structural components using dogs, wedges, strong-backs, etc.
  
• Strict adherence to safety, quality standards, good housekeeping habits, high level of critical
  thinking/reading.
  
• Travel and overtime are required.
  
• Work outside specific trade skill as required.
  

• 
  
• Work Experience: Minimum 3+ years of Shipfitter experience.
  
• Understands and performs the setup, and operation of various portable tools and hand tools used in the
  trade including plasma cutting machines and oxy/fueltorches.
  
• Has knowledge of the following: shipboard plate (hull, deck, bulkhead) systems (repair/installation
  practices, procedures, alignments, and material requirements), blueprint reading and interpretation,
  MILSPEC requirements.
  
• Must be able to fit structural components to tolerance requirements.
  
• Tack and Fillet Weld qualifications preferred (FCAW/SMAW).
  
• Must have the ability to gain access to military bases and various government facilities
  

• 
  
• Involves heavy lifting, frequent stooping, bending, crawling, reaching and possible working assignments in
  overhead structures, confined spaces or beneath machinery either indoors or outdoors in the elements and
  noisy conditions.
  
• Occasional lifting 50+ pounds.
  

• 
  
• This position is performed in a traditional office environment with local travel required between facilities.
  
• Work Shift Hours: 6am - 4:30pm (Mon. - Thurs.); overtime potentially on Fridays.
  

• 
  
• Reports directly to the Assistant Foreman/Supervisor/Production Lead.
  
• Understands and follows PPE Policy.
  
• Lays out material utilizing drawings and blueprints prior to performing cutting/fitting operations.
  
• Maintains good housekeeping practices, turning off machines when not in use, disposing of waste
  properly, sweeping the area, etc.
  
• Ensures all tools listed on the \"Required Tools List\" are available for use within 30 days of employment.
  
• Acknowledging that all requirements of the Quality Assurance Manual are followed when invoked by
  QA Workbook.
  
• Identifies and notifies Supervisor of unsatisfactory conditions during the production operation.
  
• Fabricates and installs fixtures, jigs, supports and targets to ensure proper alignment during welding processes as directed by the Supervisor/Lead Mechanic.
  
• Basic computer skills.
  
• Assumes responsibility for Contractor (CFM) and Government (GFM) furnished materials.
  
• Ability to use lay-out tools such as tool scales, squares, combination squares, trammel points.
  
• Understands fitting of structural components using dogs, wedges, strong-backs, etc.
  
• Strict adherence to safety, quality standards, good housekeeping habits, high level of critical
  thinking/reading.
  
• Travel and overtime are required.
  
• Work outside specific trade skill as required.
  

• 
  
• Work Experience: Minimum 3+ years of Shipfitter experience.
  
• Understands and performs the setup, and operation of various portable tools and hand tools used in the
  trade including plasma cutting machines and oxy/fueltorches.
  
• Has knowledge of the following: shipboard plate (hull, deck, bulkhead) systems (repair/installation
  practices, procedures, alignments, and material requirements), blueprint reading and interpretation,
  MILSPEC requirements.
  
• Must be able to fit structural components to tolerance requirements.
  
• Tack and Fillet Weld qualifications preferred (FCAW/SMAW).
  
• Must have the ability to gain access to military bases and various government facilities
  

• 
  
• Involves heavy lifting, frequent stooping, bending, crawling, reaching and possible working assignments in
  overhead structures, confined spaces or beneath machinery either indoors or outdoors in the elements and
  noisy conditions.
  
• Occasional lifting 50+ pounds.
  

• 
  
• This position is performed in a traditional office environment with local travel required between facilities.
  
• Work Shift Hours: 6am - 4:30pm (Mon. - Thurs.); overtime potentially on Fridays.