Jacobs Structural Engineer Salary Jobs in Usa

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Mechanical Analysis and Test (MA&T) Department is responsible for ensuring structural and thermal design robustness across the Raytheon portfolio of products. From preliminary concepts to fielded weapon system support, MA&T delivers innovative structural and thermal engineering solutions utilizing methods ranging from classical fundamental & empirically based techniques to state-of-the-art finite element methods leveraging industry leading commercial tools; all complimented and validated by tests executed in a manner to ensure cost effective yet technically balanced solutions.

Raytheon is seeking a mid-level career Senior Structural Engineer to join the Mechanical Analysis and Test Department.  In this role you will be responsible for detailed structural analysis to support all phases of programs including development and production. The analyses will cover a wide range of difficult problems, requiring solutions that are imaginative, thorough, practicable, and consistent with organization objectives. The analysis tasks will span the spectrum from classical hand calculations to detailed analyses requiring the use of finite element analysis software. You will be expected to define the scope and level of analysis required to meet the objectives and will be held accountable for completing the work within the agreed upon cost and schedule. You will be expected to present your work for peer reviews and to be a peer reviewer for other engineers’ work. The customers of this position will include internal personnel and programs as well as external Government(s) personnel and programs.

What You Will Do

• Perform detailed structural analyses to support all phases of programs

• Generate test plans required to validate analyses and verify hardware compliance to customer requirements

• Analyze test data to validate and correlate models, and/or generate mechanical loads and environments

• Work with limited oversight on complex problems to provide the answers needed under program cost and schedule constraints

• Coordinate and lead technical peer reviews ensuring the technical accuracy of work product as well as acting as a reviewer for others work products

• Present results to internal stakeholders and external customers

• Generate detailed, archival technical reports

• Travel to test sites to support test or design discussion (depending on work assignment)

• Act as a technical leader (help define and develop MA&T department technical processes and tools) and lead teams to meet program milestones

The Senior Mechanical Engineer - Structural Engineer job is in Tucson, AZ and the position is onsite.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience or an Advanced Degree in a related field and minimum 3 years experience

• Experience in structural analysis (i.e. PATRAN, NASTRAN, ANSYS, ABAQUS or equivalent software)

Qualifications We Prefer

• Working knowledge of mechanical principles to solve classical structural engineering problems both inside and outside of software tools

• Ability to work in a collaborative, team-based environment and independently

• 8+ years of professional experience in the structural analysis of complex systems that require collaboration of multiple engineering disciplines (such as a weapon system)

• Experience in structural testing: planning, organization, execution, data reduction and correlation

• Experience with dynamic shock and vibration analysis

• Experience with solid modeling CAD tool such as CREO or equivalent

• Experience with Matlab

• Experience leading teams and strong interpersonal skills working in a team environment

• Experience presenting to external customers

  Ability to travel to government and other facilities in support of program activities

What We Offer:

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

#LI-SM4

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

SUMMARY

The Senior Structural Engineer oversees the day-to-day operations of the design engineering and detailing department. This role reports to the General Manager and is a blend of technical design and team leadership, responsible for managing a team of CAD/Revit detailers. You will serve as the technical bridge between design, plant production, and quality control to ensure structural integrity, manufacturability, and project profitability.

ESSENTIAL DUTIES AND RESPONSIBILITES:

•          Engineering Leadership: Supervise and mentor a team of four CAD/Revit detailers; manage departmental workflows, project milestones, and deadlines.

•          Structural Design: Perform engineering calculations for prestressed concrete structures, including parking garages, bridges, multi-family residential, and hotels, etc. Coordinate and review outsourced design work.

•          Project Management: Manage multiple projects simultaneously through design, checking, submission, production, and construction phases.

•          Cross-Functional Collaboration: Partner with Project Managers, Plant Manager, and QC Department to assist with bidding efforts, resolve design issues, generate RFIs, resolve production issues, and generate NCRs.

•          Innovation & Strategy: Implement project optimization, develop efficient shipping and handling schemes, generate camber control plans, and value-engineer solutions for design-build projects.

•          Technical Oversight: Generate, review and seal (P.E.) calculations and construction documents to ensure strict adherence to building codes and company standards.

•          Stakeholder Communication: Act as the primary technical point of contact for clients and attend project meetings to ensure team synergy and client satisfaction.

REQUIRED KNOWLEDGE, SKILLS AND ABILITIES

•          Education: BS in Civil or Structural Engineering (MS preferred).

•          Licensure: Licensed Professional Engineer (P.E.) is required. Ability to obtain licensure in all New England states and New York.

•          Experience: 10+ years of structural engineering experience, with at least 5+ years specifically in precast and prestressed concrete design.

•          Industry Standards/Code Proficiency: Deep knowledge of PCI Design Handbook, IBC, ASCE-7, ACI 318, and AISC Steel Construction Manual360, and ASCE-7.

•          Technical Tools: Proficiency in Revit/AutoCAD and structural design software. Strong MS Office skills (Excel/Word).

•          Leadership: Proven ability to manage a technical team and communicate effectively with diverse personalities, from shop floor personnel to project owners.

Salary Range: $120,000.00-$160,000.00

Relocation Asssistance Available

Benefits Include: Health Insurance, Dental, Vision, Paid Vacation, 401(k) and Profit-Sharing Retirement Plan, Short-Term Disability, and Life Insurance. 

Please submit resume: Lynn Eugair/ HR Manager at or download an application from our website at and fax to (8

Equal Opportunity Employer

Pay: $85,000.00 - $125,000.00 per year

Why This Is a Great Opportunity

• Join a high-performing structural engineering team where your work directly shapes real projects and real outcomes
• Own meaningful design responsibilities (not just production) with room to grow your technical and leadership skills
• Work alongside collaborative architects, engineers, and builders who care about quality and doing the right thing
• Competitive compensation with performance-based upside and long-term wealth-building benefits
• Strong people-first benefits that support you and your family (and meaningful time to recharge)

Location: On-site in the Greater Indianapolis, IN area (work closely with the team in-person and stay connected to the full project lifecycle)

Note: Must have hands-on structural design experience for buildings and the ability to produce/calibrate calculations and drawings in a fast-moving design environment.

About Us

We’re a design-forward architecture and engineering team that believes every structure has a story — and that great outcomes come from integrity, collaboration, and strong technical thinking. We’re committed to treating people fairly, building long-term careers, and delivering solutions we’re proud to stamp. Confidential Employer.

Job Description

• Design and engineer building structural systems (steel, concrete, wood, masonry) from concept through construction
• Perform structural analysis and calculations for gravity, lateral, wind, and seismic loads
• Develop clear construction documents and coordinate structural drawings with architects and other disciplines
• Review shop drawings, RFIs, and submittals; support the team through construction administration
• Apply building codes and standards (IBC, ASCE, AISC, ACI, NDS) to create safe, efficient designs
• Collaborate with internal teams and external partners to solve complex field and constructability challenges
• Help improve workflows, standards, and quality control as the team continues to grow

Qualifications

• Bachelor’s degree in Civil Engineering, Structural Engineering, or related field
• 3+ years of structural engineering experience focused on building design
• Working knowledge of building codes and structural design standards
• Experience producing structural calculations and coordinating construction documents
• Proficiency with common structural/design tools (typical: Revit/AutoCAD plus analysis software such as RAM, RISA, ETABS, STAAD, SAP2000, or similar)
• EIT preferred; PE (or actively on the path) strongly preferred
• Strong communication skills, high accountability, and a “solve the problem” mindset

Why You Will Love Working Here

• The team is collaborative, high-integrity, and genuinely invested in doing great work
• You’ll be trusted with real responsibility and supported as you level up
• Clear standards, strong mentorship, and a culture that values quality over chaos
• Benefits that are unusually thoughtful (bonus/profit sharing, retirement, tuition support, paid leave, and recharge time)

JPC-704

Job Type: Full-time

Benefits:

• Dental insurance
• Paid time off
• Vision insurance

Position Objective: JOIN A COMPANY WHERE YOUR WORK MAKES A DIFFERENCE. Sunbelt Modular is a wholesale manufacturer that provides prefabricated buildings and structures to modular building dealers. We build schools, medical offices, data centers, and many other types of buildings. This role will work closely with the engineering group and will provide support to sales, estimating, and production teams. The ideal candidate will have a strong foundation in structural analysis and engineering design principles for both gravity and lateral systems with various building materials including wood and steel. The role provides structural engineering support and services to multiple modular manufacturing facilities around the United States. This position is remote with minimal travel required.

Essential Duties & Responsibilities

• Provide assistance to the engineering team (or individually) to move a project through the structural design phase
• Provide a complete structural calculations package for the entire design of modular units both individually and as a multi-unit complex for the state submission of each project
• Structural calculations are to include a comprehensive design of the modular unit for both the gravity and lateral systems
• Gravity designs consist of roof framing members, bearing walls, continuous span multi-layer plywood beams, structural steel clean-span trusses, engineered posts, built-up posts, HSS structural steel posts, floor joists, and wide flange structural steel chassis members
• Lateral design consists of roof and floor diaphragm sheathing, exterior wall shearwalls, interior wall shearwalls, and structural steel portal frames
• Ability to complete ‘special interest’ projects from start to finish including multi-story modular unit complexes, shipping container conversion projects, and others
• Other duties as assigned

This position is also expected to:

• Work efficiently in a fast-paced environment
• Maintain a positive, professional demeanor at all times
• Provide outstanding customer service to internal and external clients
• Be very detail oriented and well organized
• Possess outstanding interpersonal and communication skills – verbal and written
• Be skilled at problem solving and analysis
• Maintain a strong work ethic

Qualifications and Educational Requirements

• Bachelor of Science in Engineering from an EAC/ABET accredited university
• Licensed professional civil/structural engineer – preference given to candidates actively licensed in Alaska, California, and Hawaii; ability to obtain additional state licensures quickly
• Complete and current NCEES record holder
• Minimum of three (3) years’ experience as a practicing P.E. (civil/structural)
• Experience in load development and correct application to the structure
• Experience developing structural calculations for gravity and lateral systems
• Experience reviewing drawings and developing structural details
• Structural analysis/engineering design software proficiency in:

o  Excel (in-house database usage)

o  ENERCALC – Structural Engineering Library

o  Tekla – TEDDS

o  RISA – 3D

o  RGS Software – CFS 14

o  Woodworks

o  Bluebeam Revu

• Ability to develop gravity and lateral systems from concept through completion
• Ability to analyze and provide structural designs with many different materials such as wood, cold-formed steel and structural steel
• Ability to provide complete design of various building components including roof rafters, wall studs, floor joists, clearspan steel trusses, shearwall panels, structural steel portal frames and others
• Familiarity with current building codes (IBC, ASCE, NDS, AISC, AISI)

Preferred Skills

• Experience in an engineering setting with drafting responsibilities and the shop drawing review process
• Field inspection experience
• Multi-story wood design experience
• Shipping container conversion design experience

Job Requirements

• Able to successfully pass a criminal background check (following a conditional offer of employment)

Sunbelt Modular, Inc. is committed to a work environment that is inclusive to all and free of discrimination. It is our policy to be an equal opportunity employer without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, citizenship status or any other factors prohibited by federal, state, and local law. The Company will provide reasonable accommodation for qualified individuals with a disability.

Job Responsibilities:

• Assists team with project research and project coordination with governing municipalities / agencies
• Prepare complete civil design – from schematic plan sets to construction documents for permitting of development projects using AutoCAD and Civil 3D, transforming conceptual designs into detailed plans, in accordance with jurisdictional requirements.
• Collaborate with Project Manager I/II, and/or Project Engineer to prepare reports and supporting documents including hydrology reports, feasibility studies, engineers cost estimates, etc.
• Attend meetings, site visits and field inspections independently to coordinate various design aspects of projects with project consultants and/or contractor
• Review co-consultant reports, plans and /or recommendations and effectively implement into project design and documentation
• Participate in project coordination / correspondence with consultants (project architect, geotechnical engineer, structural engineer, arborist, surveyor and/or contractor)
• Ensure deliverables meet project specifications, regulatory standards, and client expectations

Job Requirements, Qualifications, Characteristics:

• B.S. in Civil Engineering
• 3–5 years of experience in civil engineering design
• Proficiency with AutoCAD Civil 3D
• Excellent written and verbal communication skills
• E.I.T. certification
• Experience in general civil engineering design topics including utility design, hydraulic/hydrology, storm water quality, geometric layout, geotechnical and structural concepts
• Access to automotive transportation
• Advanced knowledge of current building design codes and applications
• Analytical/Strategic thinking abilities
• High attention to detail
• Occasionally walk job sites and carry or use survey equipment

POSITION OVERVIEW

The Glazing Engineer is responsible for the completion of high quality façade, curtain wall and glazing system projects on time, within budget and within scope. This role will oversee all aspects of a project from start to finish by coordinating efforts involving the internal team, subcontractors, vendors, and owners/developers. The ideal candidate will have outstanding interpersonal skills, adjusting to changing priorities from various directives, and communicate effectively.

RESPONSIBILITIES

• Oversees the design development and coordination of custom curtain wall and glazing systems, translating architectural intent into engineered, buildable, and fully coordinated façade solutions. Capable of leading multiple projects and supervising engineers.
• Know and comply with all federal, state, local building codes, ordinances and regulations, maintaining the highest standards for safety and quality.
• Manage relationships with all internal and external parties in order to determine specifications of the project, resolve conflict, and support success.
• Establish project schedule and delegate project tasks based on staff strengths, skills, and experience.
• Secure and allocate all resources needed for the completion of the project including building permits, licenses, materials, equipment.
• Negotiate, manage and communicate changes to contract scope, schedule and costs.
• Plan and execute inspections, assess design compliance and quality, minimize risk.
• Create and maintain comprehensive project documentation.
• Regularly confer with supervisors to monitor and report on compliance, quality and productivity.
• Be a strong team leader, build synergy within and across the team, and develop individuals.

REQUIREMENTS

• Bachelor’s degree in Construction Management, Civil Engineering, Mechanical Engineering, Architecture or related field.
• Minimum of 3+ years of experience in façade, curtain wall, or glazing system engineering within a design-build or design-assist environment
• Strong understanding of building envelope design, structural behavior, waterproofing, and thermal performance
• Proficient in AutoCAD, Revit, and 3D modeling tools; familiarity with façade testing standards (ASTM, AAMA, NFRC)
• Experience coordinating with architects, structural engineers, and fabricators through design, procurement, and installation
• Skilled in technical documentation, submittal review, and field problem-solving
• Excellent communication and collaboration skills within multidisciplinary project teams
• A valid driver’s license.

This position description is a summary and not a complete representation of the position; the essential functions of the position may change as duties are assigned.

Information for Recruiters and Agencies/Staffing Firms: Build Group does not accept unsolicited agency resumes. Please do not forward unsolicited agency resumes to our website or to any Build Group employee. Build Group will not pay fees to any third-party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered the property of Build Group.

Notice to California Residents/Applicants: In connection with your application, we collect information that identifies, reasonably relates to, or describes you (“Personal Information”). The categories of Personal Information that we collect include your name, government-issued identification number(s), email address, mailing address, other contact information, employment history, educational history, and demographic information. We collect and use those categories of Personal Information about you for human resources and other business management purposes, including identifying and evaluating you as a candidate for potential or future employment or future contract positions, recordkeeping in relation to recruiting and hiring, conducting criminal background checks as permitted by law, conducting analytics, and ensuring compliance with applicable legal requirements and Company policies.

Equal Opportunity Employment: Build Group provides equal employment opportunity to all employees and applicants for employment, free from unlawful discrimination based on race, color, religion, gender, age, national origin, disability, veteran status, marital status, sexual orientation, gender identity, genetic information or any other status or condition protected by local, state or federal law. This policy applies to all terms and conditions of employment, including hiring, training, orientation, placement, discipline, promotion, transfer, position elimination, rehire, benefits, compensation, retirement and termination. As an equal opportunity employer, Build Group seeks to hire employees based solely on their qualifications and abilities.

We are seeking a highly motivated Geotechnical Engineer to join our team and grow with us. The successful candidate will have a solid background in geotechnical engineering and an understanding of chemical grouting and retrofit foundation work. You will have the opportunity to work alongside our subject matter experts and highly skilled implementation teams and with future potential as a practice leader.

This position will be in our geotechnical division which focuses on existing structures challenged by ordinary solutions. Example projects in our business line include soil strengthening and stabilization, such as for existing structures with poor bearing strata; groundwater control and waterproofing for below-grade structures experiencing moisture infiltration; or installation of new micro-pile foundations in industrial plants in congested areas. Our unique solutions include the ability to perform complex chemical grouting and injection work with our specialty-trained crews and equipment.

As a Geotechnical Engineer, you will be responsible for:

· Conducting geotechnical investigations, field exploration, and specifying laboratory testing for various civil and geotechnical engineering projects.

· Preparing geotechnical reports

· Designing foundation retrofits and grouting solutions

· Preparing technical specifications for projects

· Preparing proposals and project schedules

· Resolving complex issues

· Collaborating with project managers, construction managers, and other engineering disciplines to ensure successful project completion

Qualifications:

· Bachelor's degree in Civil or Geotechnical Engineering from an accredited institution.

· 5 years of experience in geotechnical engineering with a focus on soil strengthening and stabilization, groundwater control, and foundation retrofits.

· Professional Engineer (PE) license is preferred.

· Strong analytical and problem-solving skills.

· Ability to work independently and as part of a team.

· Excellent verbal and written communication skills.

· Willingness to travel domestically and internationally as required.

Our ideal candidate is an innovative but decisive engineer who can work effectively in a fast moving highly collaborative, team-based environment; has the ability to set goals and expectations and hold others accountable; can encourage and mentor others; is approachable, empathetic and outgoing; can quickly gain trust and respect; and is able to establish and maintain relationships.

STRUCTURAL TECHNOLOGIES is proud of a company culture that promotes 24/7 safety and quality. We offer competitive compensation and benefits including medical and dental insurance, 401(k), paid holidays, vacation, tuition reimbursement, career development and growth opportunities, and a caring work environment. EOE/M/F/D/V

$80K plus DOE

Purpose of the job

Continuously improve customer satisfaction. Develop quality standards, investigate non-conforming products and materials, ensure containment, determine root cause, and implement corrective and preventive actions. Audit procedures and work instructions to ensure compliance. Partner with internal operations team members and key suppliers to implement error proofing and other process controls.

Essential Job Responsibilities

• Develop Supplier Quality Guidelines to identify capable suppliers, control change requirements, and respond to nonconforming materials
• Develop risk-based control plans using historical data and FMEA to ensure quality specifications deliver customer satisfaction efficiently
• Establish effective quality metrics to ensure process control and timely reaction to changes in capability
• Develop inspection and test methods to ensure the quality of incoming materials; and equipment and capability
• Establish effective quality control methods including poke yoke and SPC
• Investigate quality concerns, ensure containment, determine root cause and implement corrective and preventive actions
• Develop a deep understanding of relevant codes, product specifications, and manufacturing processes
• Maintain reference materials and control essential Quality Management System documents
• Provide cross-functional leadership to achieve specific breakthrough improvement goals
• Work cross functionally to develop procedures, work instructions, forms, and records in support of an effective Quality Management System
• Ensure revision control and convenient access

Essential Qualifications

Structural Concepts is looking for entry level to senior Quality Engineers, and a job offer will be in line with the following expectations:

Level I

• Education: BS in Engineering, Statistics, Operations or closely related field.
• Experience 1 – 3 years
• Problem Solving Skills
• Auditing skills
• Skilled in collecting and visualizing data using trend charts, histograms, Pareto charts, etc.
• Excellent phone and email communicator.
• Functional knowledge of MS desktop and ERP applications.

Level II

• Experience 3 – 7 years
• Quality Management -OR- equivalent experience and professional training
• Skilled in applying advanced Quality tools including, SPC, FMEA, Gauge R and R, Ishikawa diagrams, QFD, Regression, ANOVA, Cpk, etc.
• Skilled in APQP - identifying critical to quality (CTQ) variables and developing control plans

Level III

• Experience 7+ years
• Skilled in coaching and influencing others
• Deep understanding of ISO9001 Quality Management Systems
• Skilled in facilitation breakthrough process capability methods using six sigma and advanced statistical tools such as DOE

The ideal candidate will be responsible for executing and leading the full design process from ideation to production. You will draw new designs and update our current designs. During the creation process, you will ensure that our designs meeting all necessary design responsibilities.

100% on site in Tulsa OK for a long term (1 year+) contract!!

Qualifications

ABET BS Engineering Degree

7 - 10 years Aero Structures Design Experience.

3-4 recent years BDS Design experience

5 years Aero Catia exp. Not composites/all metallic.

Needed ASAP

Stevens Engineers & Constructors has an excellent opportunity for an experienced and highly motivated Project Engineer/Piping Drafter to join our Cleveland Operations Team. The ideal candidate will have project engineering and drafting experience in heavy industrial markets such as steel, aerospace, or chemical processing disciplines for the purpose of coordinating all technical activities for assigned projects. The Project Engineer/Piping Drafter role blends technical drafting with project coordination to ensure piping systems are accurately designed, fabricated, and installed. While a Piping Drafter focuses on creating technical drawings, a Project Engineer oversees the technical and management aspects of the project, including schedules and client coordination.

The ideal candidate will also have a client-focused approach and will work well independently and as part of the project team.

Stevens offers a competitive salary commensurate with experience, along with an excellent benefit package. This is a perfect career opportunity to join an experienced group of professionals that are committed to providing our customers quality project results.

Essential Duties and Responsibilities

Create detailed 2D piping plans, sections, and isometrics using software like AutoCAD.

Develop and update piping & instrumentation diagrams and line lists.

Build CAD models for equipment and new piping systems based on field measurements.

Prepare, transmit and expedite shop drawings, catalog cuts, samples and other submittals for approval. Maintain logs for all.

Coordinate design activities with the project management team to resolve layout conflicts.

Prepare construction document packages.

Conduct QA/QC reviews of all drawings to ensure technical accuracy and code compliance.

Perform field surveys, including manual dimensions, to gather data on existing site conditions.

Provide technical support to construction personnel and fabricators during installation.

Assist in preparing material takeoffs (MTOs) and bill of material (BOM) estimates for procurement.

Helps track project schedules, budgets, and change orders.

Required Skills

Associates in Drafting, Mechanical Engineering, or a related technical field. With 3–5+ years in piping design or mechanical construction.

Mastery of AutoCAD and 3D modeling software.

Knowledge of SpoolFab Piping Software is a plus.

Proficiency in Microsoft Office (Excel, Word) for reporting and documentation.

Strong understanding of industrial piping codes (e.g., ASME, API) and material specifications.

Familiarity with pipe fitting, joining methods, and fabrication processes.

High attention to detail and precision in drafting.

Strong verbal and written communication for collaborating with clients and site teams.

Ability to work in industrial environments, which may include heights or extreme weather

Equal Opportunity Employer

Stevens Engineers & Constructors, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.

We are proud to be a Drug Free Workplace that places Safety First!

Nuclear Design Engineer

with significant focus on nuclear pressure transmitter products.

Work Location: Round Rock, TX

Rate: Not Defined / need Candidate’s requested rate

Per diem: $178.00/day (7 days per week)

Mob / Demob: $500.00/each way

Hours: Full Time (40 hrs / wk)

The required qualifications are as follows:

Position Details: Design, development, and support of sensor products with significant focus on nuclear pressure transmitter products.

Purpose of Position:

This position will be responsible for the design, development and support of sensor products with significant focus on nuclear pressure transmitter products. This includes design engineering, AutoCAD, SolidWorks 3D modeling, drawing creation, component specification and supplier qualification, environmental analysis, qualification testing, sustaining engineering, manufacturing support and project management.

Key Responsibilities:

• Complete assigned projects in accordance with requirements and within schedule and budget limitations
• Domain knowledge application is typically 80% Mechanical Engineering and Manufacturing Process; 20% Electrical,
• Quality, Materials
• Research and development of pressure sensor elements and components
• Product design, analysis, and documentation
• Specification reviews and configuration management
• Project management
• Create and maintain inspection, manufacturing, and testing procedures
• Production work orders and work instructions
• Sustaining engineering
• Maintaining supply of qualified components
• ‘Pre-emptive’ management of risks
• Design Reviews and problem solving
• Product Verification & Validation and acceptance
• Product and component qualification testing
• Support manufacturing during production and testing
• Interact with: Customers, Suppliers, Engineers, Operations and Materials, Quality Assurance, Management at all levels
• Other duties as assigned

Required:

• BSME from an ABET accredited University; or, equivalent Engineering degree in adjacent discipline (e.g. Electrical,
• Aerospace, Nuclear, Materials) with requisite design skills and experience
• Five (5) or more years of engineering experience including pressure sensors and transmitters
• Experience with pressure transmitter calibration, bench testing, component level troubleshooting, root cause analysis
• Working knowledge of manufacturing processes
• Design for Manufacturability (DFM)
• GD&T per ASME Y14.5M
• Experience and ability to work in a regulated industry
• Good verbal and written communication including technical writing (English)
• SolidWorks, AutoCAD or similar MCAD, MS Office

Considered a plus:

• Expertise in pressure sensor technologies
• Experience in Aerospace, Military, Nuclear, or Environmental Qualifications
• Familiarity with IEEE 323 & 344 and RCC standards, ASME Codes, and nuclear quality standards
• Solid modeling and Finite Element Analysis (FEA)
• Experience in computer integrated manufacturing CAD/CAM/CMM
• Programming in Excel, Visual Basic, MATLAB, LabVIEW

Physical Requirements: Must be capable of climbing, walking, kneeling, bending, and lifting as part of daily job responsibilities. Ability to lift a minimum of 35 – 60 lbs.

Open date: October 22, 2025

Most recent review date: Thursday, Nov 6, 2025 at 11:59pm (Pacific Time)

Applications received after this date will be reviewed by the search committee if the position has not yet been filled.

Final date: Saturday, Aug 1, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.

The Jacobs Institute for Design Innovation in the College of Engineering at the University of California, Berkeley, is seeking qualified temporary instructors to teach undergraduate courses, graduate courses, and/or special topics workshops should an opening arise in the Fall and Spring semesters, or for the Summer term. Applicants should accurately list their specializations so they can be properly evaluated as course needs arise; the existence of this pool does not guarantee that a position is available.

Lecturers supervise student design projects, give lectures, prepare assignments and project topics & deliverables, hold regular office hours, prepare exams or hold reviews, give design advice, and submit final grades.

In addition to lecturers, we also seek Teacher Special Programs (TSP) instructors, should an opening arise. The TSP's principal responsibilities can range from teaching a short course, providing a lecturer with industry expertise, participating in design critiques during a course, teaching at Jacobs Institute boot camps or workshops, or contributing to major curriculum development.

About the Jacobs Institute: Made possible by a $20-million commitment from the Paul and Stacy Jacobs Foundation, the Jacobs Institute for Design Innovation is UC Berkeley's interdisciplinary hub for learning and making at the intersection of design and technology. We see design and emerging technologies as integrally linked: technology opens possibilities and extends the reach of design, while design links new technologies with human experiences and ensures that innovation truly benefits people and communities. Bringing together technical depth, design methodology, and a focus on societal impact, we aim to educate students who understand both the under-the-hood details that make something work and the big-picture context that makes something matter. We accomplish these goals through a suite of offerings that include curricular, co-curricular and public programs.

Core programs within the Jacobs Institute include:

• 
  
• A professional Master of Design (MDes) degree, offered jointly by the College of
  Engineering and College of Environmental Design;
  
• The Berkeley Certificate in Design Innovation, an undergraduate certificate
  offered in partnership with the Haas School of Business, College of Letters & Science, and College of Environmental Design;
  
• A curriculum of ~15 design-focused Design Innovation (DES INV) undergraduate and graduate courses offered Fall, Spring and Summer, for which the institute recruits lecturers and faculty;
  
• A makerspace staffed by professional and student workers which is accessed by 1200+ students each semester;
  
• Mentorship and co-curricular programming for students, such as the Berkeley - Engineering Design Scholars and Innovation Catalysts programs;
  
• Support for 15+ design and technology courses from affiliated campus departments, ~ 30+ clubs, and ~ 8 Decal courses each semester by offering access to high quality teaching, meeting and event space;
  
• Public events and speaker series;
  
• Partnerships with companies and international universities.
  

The Jacobs Institute is housed in Jacobs Hall, a 24,000 square foot building equipped with design studios and equipment rooms featuring the latest in digital fabrication technologies.

Institute:

Labor Contact:

A Bachelor's Degree (or equivalent international degree) is required at time of application.

For Lecturers: Five years of experience in industry or a research institute, or advanced degree is required by the start of the appointment.

For TSPs: Two years of experience in industry or a research institute, or advanced degree is required by the start of the appointment.

For Lecturer positions: A higher level degree and/or prior expertise in teaching in either design or engineering schools at the undergraduate and/or master's level. Also desirable are a strong track record in developing and implementing new and experimental methods of delivering education and hands-on learning, and experience working with students from a range of disciplines.

For both Lecturer and TSP Positions: Experience working in industry and/or a research institute in relevant subject areas.

• Cover Letter

  
  

• Curriculum Vitae - Your most recently updated C.V.

  
  

• Statement of Teaching - Please discuss prior teaching experience, teaching approach, and future teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.

  
  

• 2 required (contact information only)

Help contact:

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.

The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.

For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.

In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.

As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.

Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.

As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.

• 
  
• "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  
• UC Sexual Violence and Sexual Harassment Policy
  
• UC Anti-Discrimination Policy
  
• APM - 035: Affirmative Action and Nondiscrimination in Employment
  

Apex Tool Group is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, or protected veteran status.

TITLE ： National Account Manager of Jacobs chuck

REPORTS TO ：Worldwide Sales Director of Jacobs Chuck

1. PURPOSE OF POSITION

• Develop a partnership relationship with key accounts in NA.
• Make precise forecast and reach sales target.

II. KEY RESPONSIBILITIES

• Develop and implement sales strategy to achieve sales objectives of NA.
• Increase NA market share in existing markets and maximize new business development opportunities in all sales channels.
• Introduce, develop and maintain NA client relationships, communicate with all existing clients and potential clients to provide best-in-class services.
• Perform sales analysis to identity opportunities and adapt new strategies to keep up with current and future business and sales trends.

Ⅲ. QUALIFICATIONS

• College graduation and above, excellent command of English, or other language like French, Russian, Spanish, Arabic and Japanese.
• At least 5+ years sales or business development experience in global market, have profound overseas trading experience.
• Strong in trade understanding, promotional effectiveness, customer negotiation.
• Can manage Cross-functional collaboration.
• Excellent business acumen, result -oriented and self-motivated.
• Good leadership, team building and organization skills.
• Familiar with mechanical products.

At Apex Tool Group ( ), we’re passionate about innovation. Whether that be products, processes or operations, our associates strive to find new ways each day to help our end-users solve their most complex challenges. By harnessing our global resources, unprecedented insights and spirit for service, we build more than just tools for the job site – we help build the future.

ATG is a global manufacturer of hand and power tools, tool storage and accessories, chain, and electronic soldering solutions with more than $1.4 billion in annual revenues. Our 6,900 global associates have built powerhouse brands like GEARWRENCH®, SATA®, Crescent®, Cleco®, Weller® and APEX® that professional trades and DIY enthusiasts alike can trust to get the job done. With our roots dating back to the 1800s, our tools have driven technological advancements that drive efficiency, speed and end-user safety in a broad range of commercial and consumer markets.

As part of the ATG team, you will move fast, think globally, learn from your colleagues and grow your career. You’ll enjoy competitive benefits, a healthy work/life balance and have opportunities to give back to the communities we serve.

Our six core values – Customers come first, Integrity in all we do, Continuous improvement, Innovation for growth, Passion to succeed and Best talent, one team - drive our daily decisions. Connect with us on social media to learn more – LinkedIn, Instagram, Facebook and Twitter.

If your goal is to work where finding a better way never ends and your ideas become a reality, join us! #WeBuildATG

Sales Engineer

Location: Ogden, UT – Onsite

Our client is seeking a Sales Engineer specializing in structural steel and preconstruction to join their team in Ogden, Utah. This hybrid technical and commercial role plays a critical part in winning new structural steel projects and shaping them for successful execution. Do you enjoy combining engineering expertise with client-facing collaboration? Are you passionate about structural steel construction, design-assist projects, and solving complex buildability challenges? Do you thrive when working with owners, contractors, and engineers to develop smart, cost-effective project solutions? If yes, this may be the perfect Sales Engineer position for you. Keep scrolling to see what this company has to offer.

The Perks!

• Compensation: $110,000 - $150,000, based on experience
• Health, dental, and vision insurance benefits
• 401k + company matching
• Paid time off
• Travel and gas reimbursement

A Day in the Life of the Sales Engineer

In this role, you’ll operate at the intersection of engineering, preconstruction, and business development. You’ll help shape structural steel projects during the pursuit phase by developing buildable solutions, supporting estimating and pricing strategies, and serving as the technical expert during client conversations. Your work helps ensure projects are not only won, but structured for safe, efficient, and profitable execution.

Responsibilities include:

• Review bid documents including structural drawings, specifications, and contract requirements
• Identify scope gaps, exclusions, clarifications, and potential risk items related to structural steel fabrication and erection
• Provide technical input to estimating teams including tonnage assumptions, connection design approaches, and temporary works considerations
• Contribute to pricing strategies by identifying major cost drivers and risk factors
• Participate in go/no-go evaluations and pursuit planning
• Serve as the technical representative during meetings with owners, general contractors, architects, and engineers of record
• Present structural steel solutions, means and methods, and value engineering opportunities
• Support negotiated work, design-assist, and design-build pursuits
• Translate project goals into constructible and cost-effective steel solutions
• Participate in early-stage coordination with design teams to influence structural systems and sequencing
• Assist with development of delegated design scopes where applicable
• Collaborate with internal engineering and detailing teams to ensure alignment with execution capabilities
• Coordinate with estimating, fabrication, erection, and project management teams throughout pursuits
• Document assumptions, exclusions, and scope definitions for smooth project handoff after award

Requirements and Qualifications:

• Bachelor’s degree in Civil Engineering, Structural Engineering, or related field
• Strong working knowledge of structural steel systems, fabrication, erection, and design
• Ability to read and interpret structural drawings, specifications, and contract documents
• Experience evaluated steel constructibility factors such as erection sequencing, crane access, or temporary bracing
• Strong communication skills with the ability to explain technical concepts to non-technical audiences
• Professional Engineer (PE) license or Engineer-in-Training (EIT) preferred
• Experience collaborating with owners, general contractors, and engineers during project pursuits preferred

About the Hiring Company:

Our client is a respected structural steel contractor known for delivering complex steel fabrication and erection projects across a variety of markets. Their team emphasizes collaboration between engineering, preconstruction, and operations to create efficient, constructible solutions for their clients. With a strong reputation for technical expertise and project execution, they continue to grow through strategic partnerships and innovative project delivery.

Come Join Our Preconstruction Team!

Start by filling out this 3-minute, mobile-friendly application here. We look forward to hearing from you!

Are you ready to take the lead on complex structural design projects in a fast-paced, hands-on construction environment? Do you thrive on creating technical solutions that support successful mechanical system installations?

As a Senior Structural Design Engineer, you’ll oversee multiple structural projects from start to finish—designing anchorage, seismic bracing, and vibration isolation systems for HVAC, plumbing, and piping equipment. In this role, you’ll balance hands-on design work with mentorship, task delegation, and cross-functional collaboration. You’ll also serve as a subject matter expert, supporting both project execution and team development.

What you will do

• Manage multiple structural projects that vary in complexity, owning design execution from inception to delivery.
• Review incoming design requests, prioritize workload, and delegate design tasks to junior engineers based on skill and capacity.
• Mentor and coach Design Engineers I and II, providing guidance on design best practices, code interpretation, and field challenges.
• Provide input to the Structural Lead on workload planning and team development efforts, and maintaining internal standards and preferred product documentation.
• Serve as the team’s subject matter expert on anchorage and vibration isolation design, including advanced knowledge of system applications, product options, and limitations.
• Design structural support systems, including seismic bracing, anchorage, and isolation systems for HVAC, plumbing, and piping systems.
• Perform structural calculations for non-structural components in compliance with applicable codes and standards (CBC, CMC, IBC, ASCE 7, ACI, ANSI, AISC, NDS, SMACNA, and ASHRAE).
• Coordinate with manufacturers and vendors to select, validate, and confirm compatibility of anchorage and isolation components with both design criteria and field conditions.
• Collaborate closely with Project Managers, Detailers, Superintendents, and Foremen to evaluate constructability, resolve field constraints, and coordinate timely revisions.
• Serve as a key point of contact for internal stakeholders on structural design matters, participating in engineering turnover meetings, project meetings, and design coordination efforts.
• Create and compile detailed anchorage and bracing calculation packages, including CAD-generated details, with clear and consistent presentation.
• Stamp design packages with a current PE license where required for permit submissions or code compliance.
• Attend manufacturer-led training sessions, industry seminars, and SVM’s internal Learning & Development courses to stay current on evolving codes, standards, and best practices in structural design.

Education, Skills & Experience

• Bachelor’s degree in Civil, Architectural, or Structural Engineering required.
• 8+ years’ of structural design experience with a minimum of 3+ years designing structural components for HVAC & Plumbing projects/systems required.
• Professional Engineer (PE) license in California or Nevada required.
• Strong written and verbal communication skills, with the ability to explain technical concepts to non-engineers required.
• Proven ability to support multiple projects with shifting priorities and fast-paced schedules required.
• Proficient in AutoCAD, REVIT, Bluebeam, RISA-3D, Microsoft Office Products, and anchor design software preferred.
• Knowledge of applicable building codes and seismic design criteria required.
• Advanced knowledge of mechanical systems, equipment anchorage, and seismic bracing in the MEP industry required.
• Strong organizational skills and attention to detail, with a commitment to producing accurate and high-quality work a must.
• Demonstrated success mentoring and coaching engineers at various levels a plus.

Compensation & Company Benefits Include

This is a full-time exempt position. The compensation for this role is $125,000 - $175,000 annually and is based on experience and skillset.

Health: Medical / Dental / Vision / Life & Disability Insurance / FSA

Well-Being: Robust Maternity & Paternity Leave / EAP / Paid Holidays / PTO / Sick Leave / Interactive Breakroom

Financial Wellness: 401k w/ Employer Contribution / Employee Referral Bonus / “Positive Pulse”

Community Investment: Volunteer Opportunities / Team Building Activities / Employee Activities

Physical Requirements

As a Senior Structural Design Engineer in the Mechanical Contracting Industry, there are certain physical requirements you should be aware of. These requirements ensure that you are capable of performing the necessary tasks safely and effectively. Reasonable accommodations may be provided to qualified applicants who may not be able to fulfil certain aspects of the role. The key physical requirements for this role are outlined below:

• This role may involve extensive physical activity including walking, standing, climbing, and driving to customer sites.
• This role may involve moving freely and navigating various areas within the construction site, including climbing ladders, stairs, or accessing elevated equipment.
• This role may be required to review technical specifications, pre-task plans, and other documentation to determine the safest way to perform certain tasks.
• This role may work in different environments, including construction sites, commercial buildings and in various weather conditions.
• This role may require utilizing appropriate personal protective equipment (PPE) when visiting jobsites.

Who We Are

At SVM, we are more than just a leading mechanical contractor specializing in design-build commercial HVAC, plumbing, piping, service/maintenance, and 24-hour emergency services. We’re a team dedicated to supporting the Bay Area, Sacramento, and Nevada regions with trusted expertise and an unwavering commitment to delivering exceptional experiences at every level.

Our success is built on a collaborative culture that values teamwork, innovation, and doing the right thing. We take pride in fostering an inclusive and welcoming environment where every team member feels supported, valued, and empowered to grow. At SVM, we believe our people are our greatest asset, and we prioritize their development, well-being, and success.

Our state-of-the-art fabrication facility reflects our dedication to quality and efficiency. By leveraging cutting-edge 3D design and manufacturing technology, we detail and fabricate ductwork, piping, and pre-skidded equipment to execute projects with precision and excellence.

At SVM, we don’t just focus on work—we focus on balance. We encourage a life-work approach that allows our team to thrive both personally and professionally. We are committed to helping our team members grow, stay curious, and work collaboratively to tackle any challenge. With the support of peers, managers, and executive leadership, our team is equipped to succeed and build meaningful careers.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

787 Airframe in Boeing Commercial Airplanes is hiring for a Senior (Level 5) Structures Design Engineer for our Wing, Wing Edges, or Empennage teams to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer.

Primary Responsibilities:

• Provides oversight and direction to develop, integrate and document structural and interior payload system requirements to establish the system design.

• Leads development, maintenance and modification of structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

• Leads performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications.

• Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals.

• Develops new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort.

• Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.

• Works under consultative direction.

This position is expected to be 100% onsite.  The selected candidate will be required to work onsite at the North Charleston, SC location.

Basic Qualifications (Required Skills/ Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)

• 12+ years of experience with aircraft structural design

• 9+ years of experience using CAD Tools on Model Based Definition for primary structures

• 9+ years of experience in program execution from concept development, design reviews, verification and qualification, hardware/software delivery and sustainment

• 6+ years of experience leveraging CATIA, ENOVIA, and PDM systems to support complex aerospace product design, configuration control, and lifecycle management.

• 3+ years of experience collaborating and performing oversight on projects with international partners/suppliers

• 3+ years of experience supporting test development and execution

• Part 21 and Part 25 Code of Federal Regulations subject matter expert knowledge

• Consultant level demonstrated autonomy while working with leadership and cross-functional technical teams

Preferred Qualifications (Desired Skills/Experience):

• 5+ years of experience as a Design Approval Engineer (DAE)

• 3+ years of lead experience using CATIA and Model Based Definition (MBD) for primary structure design

• 3+ years of lead experience designing and qualifying composite primary and secondary structures, including laminate design, ply-drop strategies, and structural strength considerations

• 3+ years of experience working in Product Development, Production, and Fleet phases of the Product Life Cycle

• 3+ years of hands-on experience with fabrication of metallic and composite structures

• 3+ years of experience interacting with Federal Regulators

Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

This role is for 1st shift, however, there may be additional shift requirements to support program objectives

Pay Range Summary:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Please note that the salary information shown below is a general guideline only.  Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range for Senior (Level 5): $154,700 – $209,300

Applications for this position will be accepted until Apr. 16, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

KGS Group is seeking a Senior Electrical Engineer to join our growing practice in Bellevue, WA or Granite Bay, CA.

About Us

We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We’re different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right.

As an employee-owned company, we’re invested in our work and our people. Working with us means you’ll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you’ll have countless opportunities to learn and grow.

Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team!

The Role

As a Senior Electrical Engineer, you will be responsible for providing engineering inputs integral to both small and large scale hydro projects. You will lead and mentor teams, support management of production and coordinate delivery of engineering inputs often with multi-disciplinary project team members and senior stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our powerhouse and energy capabilities and working with key staff in growing that aspect of the business.

You’ll also be involved in supporting project management duties, liaising with both internal and external clients as well as assisting with guiding and mentoring graduate engineers within the team. In this role you will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out onsite visits for rehabilitation and upgrades to dams, hydroelectric facilities and new hydroelectric developments. You will participate in design and play a large role in mentoring the team. You will be working in a collaborative environment with a great team of engineers and scientists, and you will also interface directly with clients.

Key Responsibilities

• Provide input to those managing and executing multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects.
• Establish and facilitate connections with other departments to support and enhance service delivery.
• Work collaboratively with other disciplines and multidisciplinary project teams to execute project deliverables, as well as ensure that quality objectives, schedules and budgets are met.
• Support and collaborate on new business opportunities with new and existing clients, as well as supporting business development efforts for electrical work.
• Manage and mentor junior staff.
• Design modifications to, or entirely new, electrical, instrumentation and balance of plant systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations.
• Manage and execute multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects involving water resources, flood control and hydroelectric sectors.
• Design modifications to, or entirely new, electrical, instrumentation, protection, and balance of plant systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations.
• Perform electrical calculations.
• Conduct inspections and support project work on site as required.
• Edit and prepare design specifications.
• Provide detailed designs and coordination of facilities with team members.
• Conduct QA/QC reviews and provide leadership and mentoring related to KGS’s QA/QC process.
• Contribute to the development of the electrical engineering practice at KGS by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks.
• Perform other duties as assigned.

About You

• Minimum of a Bachelor of Science (BS) degree in Electrical Engineering from a recognized university. A post graduate degree would be an asset.
• Minimum of 15 years of experience in electrical engineering with demonstrated project management skills (tracking budgets and meeting schedules).
• Must be registered as a Professional Engineer (P.E.) in California, Oregon, or Washington, as well as eligible for registration as a professional engineer in other states by comity through NCEES.
• Demonstrated leadership of electrical design projects in the industrial power generation field, with experience managing and mentoring younger staff.
• Previous consulting experience is preferred.
• Excellent verbal and written communication skills are required.
• Candidate must be able to work independently with minimal supervision.
• Client interaction: must be able to effectively assume a lead role as project engineer at project meetings and communicate project and technical information.
• Demonstrated experience in site investigations, condition assessments, design and construction support are preferred.
• Experience with station service distribution (all voltages), medium voltage equipment, fixed bus power distribution systems, Programmable Logic Controller (PLC) automation (for equipment control), generators and transformers including related monitoring systems, communication systems, system grounding, hoists and gate automation, and balance of plant systems for hydroelectric stations preferred, but industrial experience will be considered.
• Experience with the following would be considered an asset:
• Backup power systems (including Uninterruptible Power Supply (UPS), Direct Current systems and fuel fired backup)
• Lighting (including emergency and exit lighting systems)
• Fiber and copper structured cable systems, and associated networking equipment
• Distributed Control System (DCS) and PLC Automation, Human Machine Interface (HMI) and Remote Terminal Unit (RTU) integration (including any programming experience)
• Protection systems experience, including specifying, setting and verifying (include reference to voltages)
• Load flow analysis, system modelling, arc-flash, grounding, and other electrical studies (include reference to software used and any training)
• North American Electric Reliability Corporation (NERC)/Critical Infrastructure Protection (CIP) planning
• Physical or cyber security planning or design
• Unit outage planning
• Other renewable energy experience
• Travel to project sites is usually limited but is required depending on project/client requirements.
• Must possess a valid driver’s license and the ability/willingness to undergo security clearance checks.
• Have a drive, attitude, and commitment to being an active participant in our employee-owned culture is a must.

The salary range for this position is $130,000 to $180,000 annually.

Please note that the salary ranges mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate’s experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization.

KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package.

KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process.