Three Stone Ring Design Jobs in Usa

Job Summary:

We are seeking an experienced Embedded Software Design Engineer to support development and compliance of an Arm-based SoC embedded software platform in accordance with DO-178C DAL A safety-critical standards. The role involves understanding and maintaining an existing code base, performing software requirement analysis, architecture design, and ensuring complete lifecycle compliance including traceability, documentation, and configuration management.

Key Responsibilities:

• Understand, build, and maintain the Arm-based SoC embedded software code base.
• Ensure software development follows DO-178C DAL A safety-critical SDLC processes.
• Perform software requirements capture, analysis, and traceability.
• Develop software architecture and detailed design documentation.
• Update and maintain source code to meet DO-178C compliance.
• Support SDLC reviews and Pre-SOI audit activities.
• Prepare design analysis reports and resolve technical issues.
• Maintain requirements, design, code, and test traceability.
• Support configuration management and documentation activities.

Required Skills:

• 7+ years of experience in embedded software design and development.
• Strong experience with DO-178C DAL A safety-critical software lifecycle.
• Experience with software architecture, design, and requirement analysis.
• Knowledge of communication protocols: Ethernet, SPI, RS485, CAN, I2C.
• Hands-on experience with DOORS, Git, Matissa, MS Visio.
• Familiarity with AMD Vitis, ARM C Compiler, and Lauterbach Trace32.
• Experience with SDLC documentation and Pre-SOI audit processes.

Key Responsibilities

• Develop and support the design of exterior components and assemblies from concept through production using CAD. Ensure designs meet functional, aesthetic, and manufacturability requirements.
• Manage the release of production-ready parts, drawings, and Bills of Material (BOM) through PLM systems such as Teamcenter while supporting program milestones and engineering documentation.
• Work closely with suppliers on feasibility, design for manufacturing (DFM), tooling development, and technical reviews to ensure parts meet cost, quality, and timing targets.
• Support validation activities including DVP&R development, testing coordination, and design verification to ensure components meet durability, fit, finish, and performance standards.
• Partner with Styling, Studio, Manufacturing Engineering, CAE, and Program Management teams to ensure exterior components align with vehicle styling intent and production requirements.
• Support DFMEA development and manage engineering changes (ECR/ECO) to resolve design issues and improve product quality throughout the development cycle.
• Provide engineering support during prototype builds, pilot builds, and production launch to address fit, finish, and assembly concerns.

Required Qualifications

• Bachelor’s degree in Mechanical Engineering, Automotive Engineering, or a related engineering discipline.
• 3–8+ years of experience in automotive exterior trim design, development, or release engineering.
• Experience using CATIA V5/V6, or similar CAD software for 3D modeling and design development.
• Understanding of plastic injection molding, composite materials, tooling development, and painted exterior components.
• Experience with GD&T, DFMEA, DVP&R, and PPAP processes.
• Familiarity with automotive regulatory requirements such as NHTSA and FMVSS related to exterior vehicle components.

Process / Design Engineer - Oil/Gas

Catoosa, OK | Full-Time | On-Site | Monday-Friday

Candidates must be authorized to work in the U.S. without current or future sponsorship.

Compensation & Benefits

• Compensation: 85k-115k salary based on experience
• Health Coverage: Medical, dental, and vision insurance
• Retirement: 401(k) with company match
• Time Off: Paid time off and paid holidays
• Protection: Life and disability insurance
• Family Support: Parental leave
• Ownership: Employee-owned company

About The Role

• Process- and facilities-focused engineering role supporting gas processing and skid-based equipment
• Involved in capital and major maintenance projects across midstream-style facilities
• Blend of design work, field exposure, and project execution ownership

Key Responsibilities

Process & Facilities Engineering

• Design and validate gas processing systems (treating, compression, dehydration, stabilization, metering)
• Develop and interpret PFDs, P&IDs, and core process calculations
• Perform equipment sizing and support facility evaluations and modifications

Project Development & Execution

• Support scope definition, early estimating, and constructability reviews
• Participate in detailed design and execution-phase project support
• Assist with budgeting for process equipment and facilities

Client & Technical Support

• Act as a technical liaison with clients, vendors, and internal teams
• Participate in technical meetings and design walkthroughs
• Evaluate technical feasibility and soundness of proposed solutions

Codes & Tools

• Perform ASME pressure vessel calculations
• Utilize oil & gas process modeling and facilities design software

Qualifications

• Bachelor’s degree in Engineering (Chemical, Mechanical, Petroleum, Electrical, or Instrumentation)
• PE license preferred
• 2+ years of experience in gas processing, facilities, or packaged process equipment
• Strong understanding of P&IDs and oil & gas processes
• Proficient with oil & gas process and facilities design software (e.g., ProMax or similar gas processing simulation tools, and pressure vessel design software such as Compress)
• Strong communication, analytical, and organizational skills

Work Environment & Physical Requirements

• Office-based with periodic field or facility visits
• Ability to work at a computer for extended periods
• Occasional travel and light lifting may be required
• Valid driver’s license and acceptable driving record required

Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.

Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Southern California | Full-Time | Engineering + Field Integration

$130K – $160K DOE + Benefits

Confidential Client – Wireless Infrastructure & Public Safety Systems

We are seeking a Design & Compliance Engineer to lead in-building DAS and ERRCS engineering with a primary focus on California Title 24 and IFC Section 510 compliance. This is not just a commissioning role.

This position owns the technical integrity of the system from design validation through AHJ approval.

The ideal candidate ensures systems meet public safety code requirements, recommends compliant product solutions, prepares engineering submittals, and value engineers projects while preserving performance and inspection approval.

Primary Role Overview

This engineer serves as the technical authority on:

• Code-compliant system design
• Product selection & specification
• AHJ coordination
• Submittal preparation
• Coverage validation
• Value engineering
• You ensure systems are engineered correctly the first time and pass inspection.

Core Responsibilities

1. Engineering & Compliance Oversight

• Review and validate DAS / ERRCS RF designs for code compliance

• Ensure systems meet CA Title 24, California Fire Code (IFC 510), and local AHJ standards

• Validate minimum signal strength (-95 dBm or jurisdictional requirement)

• Ensure grid testing percentages meet jurisdictional coverage thresholds

• Confirm critical area coverage (stairwells, fire command centers, elevator lobbies, etc.)

• Interpret fire department amendments and jurisdiction-specific variations

• Interface directly with AHJs to resolve technical requirements

2. Product Specification & Recommendation

• Recommend compliant DAS / ERRCS equipment based on project conditions

• Evaluate OEM solutions (JMA, SOLiD, ADRF, CommScope, etc.)

• Ensure battery backup, monitoring, fiber/coax pathways, and survivability requirements meet code

• Prepare detailed Bill of Materials (BOM)

• Provide technical guidance to PMs and installation teams

3. Submittals & Documentation

• Prepare engineering submittals for AHJ review

• Generate RF design documentation using iBwave

• Provide compliance letters and engineering narratives

• Support permit submission packages

• Coordinate redlines and design revisions

• Produce acceptance testing documentation

4. Value Engineering

• Identify cost-efficient alternatives without compromising compliance

• Optimize amplifier placement and antenna layout

• Reduce overdesign while maintaining inspection success

• Provide technical trade-off analysis when necessary

5. Field Validation & Commissioning Support

• Conduct RF site surveys and grid testing

• Oversee commissioning and optimization

• Support final acceptance inspections

• Coordinate annual testing documentation as required

Required Qualifications

• Position Requirements:

• NICET Level III In-Building Public Safety Communications Certification
• NICET Design Public Safety Communications Certification
• IBWAVE Certification
• PCTEL Certification
• Has been involved with projects in California
• Vendor relationships
• AHJ relationships
• Some sales or sales support experience
• Fire alarm experience/knowledge, nice to have but not critical
• Ability to grow a new division
• Valid driver’s license & travel flexibility

Preferred Qualifications

• iBwave certification

• FCC GROL License

• NICET - In-Building Public Safety Communications

• DAS OEM Certifications (JMA, SOLiD, CommScope, ADRF, etc.)

• OSHA 10/30

• Fiber & coaxial termination/testing experience

What Makes Someone Successful Here

• Understands California compliance-driven DAS deployments

• Comfortable working between engineering and field operations

• Able to work directly with inspectors, fire officials, and project stakeholders

• Strong troubleshooting mindset with attention to detail

• Executes with accountability and professionalism

Why This Role

• Work on high-profile commercial & public safety projects

• Strong engineering support and stable project pipeline

• High-demand niche skillset (ERRCS / Title 24 expertise)

• Competitive salary + full benefits

Interested?

This is a confidential search. Apply or comment DAS on the post and we will reach out for more details and to discuss fit.

JOB DESCRIPTION

Insight Global’s Client is seeking a mid-level to senior PCB Layout Engineer / PCB Designer to support the design and layout of complex, space‑constrained, high‑performance PCBs. This is a hands‑on role requiring strong technical depth, adaptability, and the ability to balance multiple designs and priorities simultaneously. You will work closely with electrical, mechanical, RF, and manufacturing engineers to deliver production‑ready designs that meet strict performance, reliability, and manufacturability requirements.

REQUIRED SKILLS AND EXPERIENCE

- 4+ years of professional PCB layout experience using Cadence Allegro

- Demonstrated experience with HDI designs, including microvias and high‑density routing

- Hands‑on experience designing flex and rigid‑flex PCBs

- Strong understanding of high‑speed layout principles, power distribution, and manufacturability - Experience working in a fast‑paced environment with shifting priorities and tight timelines

- Ability to work independently and take ownership of multiple designs simultaneously

NICE TO HAVE SKILLS AND EXPERIENCE

- Experience in consumer electronics, robotics, aerospace, or autonomous systems

- Startup or small, highly collaborative hardware team experience

- Exposure to high‑speed interfaces, embedded computing platforms, RF, or camera systems

- Experience supporting prototypes through EVT/DVT/PVT cycles

Job Title: Embedded Hardware Engineer - MCCB and PCB

Location: Cedar Rapids, IA

Job Summary

1. Responsible for the Hardware design and development activities for the MCCB products
2. Communicate with various (SW, purchase, CAD, ME) teams and implement it in the HW design
3. Assist the testing team with test plan generation and procedure
4. Support technician in the testing related issue and execute the testing of the designed boards
5. Assist the ECAD and MCAD team in product design update.
6. Good knowledge on PDLC and support to Industrialization teams.

Knowledge and requirement:

1. well experience in Microcontroller selection, design and development activity
2. knowledge in Allegro - Cadance for simulation, schematic drafting, PCB layout and routing
3. knowledge in MCAD activity review with CREO.
4. knowledge in power supply design is an added advantage (not a hard requirement, but need to have atlease testing knowledge)
5. knowledge in HW interface(Ethernet) and communication (SPI)
6. Knowledge in Simulation tools like MATLAB, LTSPICE & TINA
7. knowledge in JIRA, JAMA and confluence (as a user)
8. Windchill knowledge(PDM) as a user is must.
9. Knowledge in GFCI & AFCI are added advantage for this position

Job Title: Project Administrator - Data Center Information Technology/Design/Engineer Firm

Job Type: Full-time

Job Location: On-Site Edison, NJ

Project Administrator

NJ Data Center growing Information Technology/Design/Engineer Firm is seeking a Project Administrator to join our team. The Project Administrator is responsible for managing the administrative tasks and logistical aspects of data center construction or expansion projects, including coordinating with various teams, tracking project progress, maintaining documentation, and ensuring smooth execution of project activities under the guidance of a project manager, all while adhering to deadlines and budget constraints; essentially acting as the organizational backbone for the project.

Responsibilities include but are not limited to:

1. Support project team on all administrative tasks and duties.
2. Heavy client/vendor/supplier interaction.
3. Preparation of spreadsheet reports, contracts documents, purchase and change order requests, presentations, and correspondence.
4. Receive, maintain and distribute submittals, RFI’s, shop drawings and establish project log to record receipt and disposition of same.
5. Coordinate project meetings and travel arrangements.
6. Maintain electronic and manual database of all project files and archives.
7. Other responsibilities normally performed in the execution of a Project Administrator position according to standard Architectural/Engineering industry practices.
8. Assist architects/engineers with editing/issuing project book specifications (electronic IE: Master Specs).

Qualifications:

1. Three to five years experience in Engineering firms or related fields.
2. BA is recommended.
3. Must exhibit initiative, judgment, and quality in performance and responsibilities.
4. Deadline and detail oriented.
5. Proficiency in Microsoft Office, Word, Excel, Outlook, Power Point.
6. Ability to work well with multi disciplines in a fast paced environment.

Work Schedule:

This is a full-time job position. In office, not remote or virtual.

Normal business hours are Monday thru Friday 8-5pm.

Benefits:

• 401 k match to $3500
• Full health medical/dental/prescription/life insurance (75% paid by employer 20-25% paid by employee)
• After 3/5 years eligibility based on rating for company owned NJ shore house
• Tuition reimbursement for employee
• Subjective year end bonus plan(end September)
• Awards/recognition for superior effort and extraordinary excellence
• Longevity awards 5/10/15/20/25/30 plus years
• After 15 years education assistance for children eligibility
• After 15 years eligibility for additional retirement compensative (elective)

BRUNS-PAK is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, gender identity and/or expression, national origin, disability, veteran, or other protected status.

Company Description

SSA Engineering (Schwartz Sievers Anoia) is a renowned engineering firm with a legacy of excellence dating back to the 1970s. Our team of LEED-certified engineers and licensed professionals, serving over 22 states, specializes in designing innovative and efficient systems for a variety of building types, including office spaces, residential buildings, mixed-use facilities, data centers, hospitality venues, and retail spaces. With decades of experience, SSA is committed to delivering top-quality projects on time and within budget. Clients value our expertise in areas such as base building designs, building renovations, mission-critical facilities, and analytical studies like feasibility and cost analysis.

Role Description

The Plumbing Engineer will provide engineering design, evaluation and planning of plumbing systems. The Engineer will have the opportunity to work on projects in a variety of market sectors, with primary focus on residential and commercial. The ideal candidate is detail-oriented, collaborative and committed to delivering high-quality work and excellent client service.

Responsibilities

• Develop systems design calculations and selection of equipment for multifamily and commercial projects
• Develop plumbing construction documents using Revit MEP
• Build and coordinate plumbing BIM models as part of a multidisciplinary team
• Set up and manage Revit MEP projects using company templates
• Create, modify, and maintain Revit MEP families
• Manage project files including posting models, coordinating updates, managing links, and maintaining version control
• Be responsible for code compliance research
• Participate in coordination meetings with internal teams and external project partners
• Prepare and generate reports as required

Qualifications and Experience

• Bachelor’s Degree in Mechanical Engineering or a related field
• Minimum 5 years of plumbing design experience in multifamily and commercial building projects
• PE or ability to obtain a PE is considered a plus
• LEED certification or experience is considered a plus
• Strong understanding of plumbing design principles and industry standards
• Experience developing and managing Revit MEP models
• Proficient with Revit and AutoCAD
• Strong written and verbal communication skills
• Proficiency in Revit, Autocad and MS Office
• Knowledge of codes, standards and design guidelines
• Strong organizational skills and attention to detail

Benefits

• Competitive salary
• Comprehensive benefits package
• 401(k) retirement plan
• Supportive and collaborative work environment
• Opportunities for professional growth and advancement

If you’re a skilled plumbing engineer who thrives in a collaborative environment and wants to work on exciting residential and commercial projects, we’d love to hear from you!

DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity for a Lighting Design Project Coordinator.

• Pay range is $55,000 to $80,000 annually (based on skills/knowledge/experience)
• Location: onsite in Carson, CA

The Project Coordinator will collaborate closely with our design team, dealers, and representatives to intake new projects, conduct scope calls to establish project parameters, and work alongside account managers to facilitate invoices. They must possess the capability to read and understand construction sets to evaluate if all essential information for initiating the project has been received. Additionally, they will monitor project status, maintain project log and coordinate with multiple disciplines to acquire the necessary documentation.

Primary Job Responsibilities:

· Initial project intake and processing

· Effectively review documentation and assess missing information needed for design services

· Communicate with clients, designers and sales teams on additional information needed to complete projects in a timely manner

· Communicate with clients on project deadlines and give updates on progress

· Update and maintain team calendar and project coordination board

· Would conduct initial calls to clarify project scope, services required, product needs and client specific direction.

· Produce clear documentation that summarizes initial call information to communicate to design team for successful deliverables that satisfies clients requirements

· Collaborate with account managers to provide quotations

· Display a commitment to quality by following required procedures and practices; take all appropriate measures to ensure quality

· Work with assigned outside sales managers to track the status of projects in the pipeline and to maintain customer satisfaction with project deliverables and processes.

· Identify and assess customers’ needs to achieve satisfaction

· Self-motivated individual with ability to complete tasks in a timely manner

Primary Job Requirements:

· 3-5 years of project management or experience in related fields such as interior design, architecture, or lighting design.

· Demonstrated knowledge of design sets (plans, elevations, sections etc.)

· Successful history of written and verbal customer communication skills

· Demonstrated proficiency in administrative and documentation procedures

· Proficient with Microsoft Office Suite of products (Outlook, Word, Excel, PowerPoint)

· Proficient with AutoCAD not required but would be a plus

· Must have the ability to manage multiple and shifting priorities in a fast-paced and constantly changing environment

· Must have a high degree of initiative and the ability to manage multiple tasks, work under pressure, and meet deadlines as required

Educational Requirements: High School Diploma. Bachelor’s degree in interior design, Architecture or Architectural Engineering

Program Proficiencies: Microsoft suite, Bluebeam Revu, AutoCAD (a plus), Outlook

Company Description

DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.

Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.

DMF Lighting is proud to be an Equal Opportunity Employer.

Job Title: Senior Design Drafter

Location: Elma, New York (Onsite)

Work Address: 611 Jamison Rd, Suite 3930, Elma, NY 14059

Duration: March 22, 2026 – March 13, 2027

Employment Type: Contract

Job Summary:

The Senior Design Drafter will be responsible for developing detailed engineering drawings and 3D models to support the design and manufacturing of advanced mechanical systems. This role requires extensive experience in drafting within a manufacturing environment, strong CAD expertise, and the ability to collaborate with cross-functional teams to deliver high-quality design solutions.

Key Responsibilities:

Collaborate with engineering, manufacturing, and program management teams to define design, drawing, and fabrication requirements

Lead the development of product layouts and detailed drawings, ensuring proper proportions, component arrangements, and dimensional accuracy

Create and finalize 3D models and detailed drawings independently or in collaboration with design teams

Utilize CAD systems to develop layouts, perform clearance checks, and provide manufacturing-ready documentation for CAM processes

Support engineering, sales, and program teams with proposal drawings and technical documentation

Organize and plan drafting requirements, ensuring all necessary drawings are complete and accurate

Review and validate detail drawings for compliance with standards and project specifications

Coordinate drafting activities and support project timelines, occasionally guiding junior drafting staff

Participate in design reviews and provide input on workload estimates and technical feasibility

Required Qualifications:

Associate’s degree in Mechanical Technology or a related field

20+ years of drafting or design experience in a manufacturing environment

Strong knowledge of drafting practices, dimensioning, and geometric tolerancing (GD&T)

Proficiency in mechanical CAD (MCAD) tools

Preferred Qualifications:

Experience with Siemens NX and Teamcenter PLM systems

Understanding of machine shop practices, fabrication methods, and material properties

Knowledge of mechanical design principles including kinematics, stress, and thermal effects

Key Skills:

Advanced mechanical drafting and design capabilities

Strong attention to detail and problem-solving skills

Ability to work independently and manage multiple priorities

Excellent communication and collaboration skills

Strong organizational and planning abilities