Engineering Jobs in Cayce

Job Title: Test Technician

Location: West Columbia, SC

Hire Type: Contract to Hire

Benefits: Insurance (Medical, Dental, Vision), PTO, and more!

Pay: $24-$28 per hour

Shift: 1st Shift

We’re seeking a hands-on Test Technician with a solid technical foundation and strong troubleshooting abilities to support our electronic product testing operations. The ideal candidate will have formal training, certifications, or education in electronics and a working knowledge of Ohm’s Law, schematic reading, and electrical power systems. This role focuses on real-world testing, debugging, and validation.

Job Duties:

• Conduct electrical and electronic tests to verify performance, functionality, and compliance with production quality standards.
• Troubleshoot and debug issues at the component, board, and system levels using schematics and test equipment.
• Develop, maintain, and improve test and burn-in processes to ensure reliability and throughput.
• Review and update process specifications and documentation to ensure accuracy and alignment with current practices.
• Monitor yields and identify root causes of test failures, coordinating corrective actions with engineering and quality teams.
• Support the design, setup, and validation of new test fixtures, jigs, and diagnostic tools.
• Perform firmware flashing, system configuration, and multi-unit hardware interconnects (Ethernet/BNC/twisted pair).
• Set up and test complex disk arrays or power distribution assemblies as required.
• Maintain preventive maintenance and calibration schedules for all test equipment.
• Drive recovery and repair efforts for any downed test or burn-in stations, coordinating across maintenance and engineering teams.
• Assist with new product introduction (NPI) by supporting test development and validation activities.

Qualifications:

• Associate degree, technical diploma, or equivalent military/electronics training required.
• Strong understanding of Ohm’s Law, circuit fundamentals, and electrical schematics.
• Hands-on experience testing and troubleshooting electronic or electrical systems.
• Proficiency with meters, oscilloscopes, and other diagnostic tools.
• Experience with power electronics or high-voltage systems is a plus.
• Ability to follow detailed procedures, interpret technical drawings, and work independently to resolve issues.
• Excellent problem-solving and communication skills.

Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

The Construction Scheduler & BIM Modeler is a hybrid role responsible for integrating schedule development with model-based coordination to improve project predictability, sequencing, and execution. This position supports projects from preconstruction through closeout by combining Critical Path scheduling with BIM coordination, clash detection, and 4D planning.

This role works closely with Project Managers, Superintendents, Preconstruction, and trade partners to ensure projects are delivered on time, fully coordinated, and aligned with company standards for safety, quality, and accountability.

Essential Functions/Job Responsibilities:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily, with or without special accommodation.

Key Responsibilities

Scheduling (CPM / Project Controls)

• Develop and maintain baseline CPM schedules during preconstruction
• Build detailed construction schedules including phasing and sequencing
• Identify critical path activities and long-lead procurement items
• Lead schedule coordination meetings with internal teams and subcontractors
• Provide bi-weekly or monthly schedule updates
• Develop recovery schedules when delays occur
• Perform time impact analysis when needed
• Create executive-level schedule reporting dashboards
• Support claims documentation related to schedule impacts

BIM Modeling & Coordination

• Develop and maintain 3D BIM models for coordination and planning
• Perform clash detection and facilitate trade coordination meetings
• Integrate schedule into model for 4D sequencing visualization
• Support quantity takeoffs and model-based estimating
• Produce coordination drawings and assist with shop drawing review
• Maintain BIM standards and naming conventions
• Assist field teams with model access and real-time updates
• Support as-built modeling and closeout documentation

Qualifications

• Bachelor’s degree in construction management, Engineering, Architecture, or related field (preferred)
• 3–5 years of commercial construction experience
• Proficiency in:
• Primavera P6 or Microsoft Project
• Autodesk Revit
• Strong understanding of construction sequencing and field operations
• Ability to read and interpret plans and specifications
• Experience with healthcare or complex commercial coordination preferred
• Excellent communication and analytical skills

This job description outlines the primary and recurring responsibilities of this position. It is not intended to be an exhaustive list of all duties, responsibilities, or tasks that may be required. The individual in this role will regularly perform additional related assignments, special projects, and other duties as directed by company leadership, including the Director of Operations, Preconstruction Manager, and/or other designated supervisors.

South Carolina is an Employment-At-Will state. This job description does not constitute an employment agreement or contract. Management reserves the exclusive right to modify, revise, or update this job description at any time, with or without notice.

Title: Repair Technician

Location: West Columbia, SC

Hire Type: Contract to Hire

Pay: $30-$32/hr

Benefits: Insurance (Health, Medical, Dental), PTO, and more

We are seeking a skilled Repair Technician to join our operations team. In this role, you will perform diagnostics, troubleshooting, rework, and repair of electronic assemblies, PCBAs, wiring harnesses, and mechanical components to restore units to full functional condition. All work must meet IPC standards, customer requirements, and ESD-safe handling practices.

Job Duties:

• Perform diagnostics, testing, calibration, and troubleshooting of electronic and mechanical assemblies.
• Execute component-level and board-level rework in accordance with IPC-7711/7721 standards.
• Perform soldering, de-soldering, component replacement, wiring, and mechanical assembly per work instructions.
• Inspect and rework PCBAs, connectors, wiring harnesses, and solder joints to IPC Class 2 and 3 standards.
• Operate diagnostic and test equipment including oscilloscopes, meters, power supplies, microscopes, and programmable auto-testers.
• Use soldering stations, hot-air rework tools, hand tools, and ESD-safe equipment.
• Identify nonconforming conditions and apply corrective actions aligned with quality and customer requirements.
• Maintain accurate job tracking, component usage records, and part traceability documentation.
• Pick components, prepare repair/rework kits, and support part verification processes.
• Ensure proper material handling and ESD-compliant storage practices.
• Collaborate with Engineering, Quality, and Operations teams to report defects, trends, and improvement opportunities.
• Follow all safety, environmental, and company policies.
• Assist and train coworkers as needed and provide feedback on product or process improvements.
• Perform additional duties as assigned by leadership.

Qualifications:

• High school diploma or GED required; associate’s degree, military, or vocational training preferred.
• 6+ years of electronics repair or rework experience
• Strong experience with PCBAs, component-level repair, and IPC workmanship standards.
• IPC-A-610 and/or Certified IPC Specialist (CIS) certification required
• Ability to read schematics, diagrams, and technical work instructions.
• Proficiency with diagnostic tools, soldering, and ESD-safe practices.
• Strong attention to detail, documentation accuracy, and quality standards.
• Ability to lift up to 50 lbs and perform repetitive or detailed manual work.
• Commitment to safety and teamwork in a production environment.

Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

Requirements of the Tech Scholar:

• Be enrolled as a full-time student in a Mechatronics or EET program at a partnered Technical College with Michelin
• Be a full time student (12 credit hour per semester)
• Have and maintain a minimum 2.5 GPACumulative
• Be able to work at least 20 hours per week at Michelin during the program

Job Achievements:
* Methods and practices applied (job performed in safety, quality, respect of instruction,...)
* Sustain equipment compliance (standard, cleanliness, cycle time, influent parameters,...)
* Interventions are encoded, documented, and analyzed
* Effectiveness of all interventions (prevent breakdowns, cure the default within an optimized time,collaboration with Production, Quality, ...)
* Efficiency of all interventions (resources used, consumption of spare parts, sustained energy efficiency of equipment)
* Support MDP processes (participating in analyzes, requirements from 5' briefing treated or upgraded...)
* Machine performance assured for perimeter of responsibility

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.
• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Business Resource Groups and Inclusion Councils.
• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.
• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!

• Leading the Naval network warfare missions in developing tactics and procedures to realize tactical, strategic and business advantages afloat and ashore
• Driving interoperability with joint, allied and coalition partners
• Building professional excellence through education, training and certification and milestone qualifications
• Optimizing organizational effectiveness through cutting-edge technologies, knowledge management techniques and a culture of innovation
• Helping to develop and deploy information systems, command and control and space systems
• Serving as a key part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries
• Overseeing the work of Information Systems Technicians - Enlisted Sailors (no degree required) who serve as specialists in information technology

• Serving as part of Battle Group staffs on ships at sea
• Working in C4I/Space/Surveillance on shore tours
• Serving on major Navy and joint staffs
• Serving in command of key communication and surveillance facilities around the globe

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

NOVA Engineering is seeking a Geotechnical Staff Engineer to help manage a wide variety of geotechnical projects based from our Columbia, SC office. Must be willing for travel outside of the Carolina's.

RESPONSIBILITIES

You will be part of a dynamic, growing and energized team – and your role is key to the success of NOVA Engineering. While your job duties may fluctuate day to day, here are some areas we expect to see you excel in:

• Operating and maintaining pressure meter testing equipment
• Laying out borings and test pits with conventional surveying and Global Positioning Systems (GPS)
• Observing and classifying test pits and performing hang auger borings
• Being involved in site seismic testing and Pile Driving Analyzer (PDA) testing
• Classifying samples obtained from drilling operations
• Testing, sampling, and inspecting soil
• Performing routine field and laboratory tests

QUALIFICATIONS

• Bachelor’s degree in Civil Engineering from an ABET-accredited institution, or an equivalent international degree with NCEES credential evaluation, is required.
• E.I.T. is required or ability to obtain within 3 months
• Recent graduates are encouraged to apply
• 1 - 3 years applicable experience is preferred
• Strong communication skills
• Position entails approximately 70% fieldwork and 30% office with occasional travel.

Check out our Perks:

In addition to our welcoming company culture and competitive compensation packages, our employees enjoy the below benefits:

• Comprehensive group medical insurance, including health, dental and vision
• Opportunity for professional growth and advancement
• Certification reimbursement
• Paid time off
• Company–observed paid holidays
• Company paid life insurance for employee, spouse and children
• Company paid short term disability coverage
• Other supplemental benefit offerings including long-term disability, critical illness, accident and identity theft protection
• 401K retirement with company matching of 50% on the first 6% of employee contributions
• Wellness program with incentives
• Employee Assistance Program

NOVA is an Equal Opportunity Employer. All qualified candidates are encouraged to apply. NOVA does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, ancestry, marital status, veteran status or any other characteristic protected by law.

• Designs and produces engineering drawings for natural gas and auxiliary facilities.
• Provides technical guidance to engineers and designers, ensuring drawing accuracy, consistency, and adherence to company drafting standards.
• Maintains design consistency across the engineering team by applying established standards, best practices, and quality controls.
• Collaborates with engineering and operations to optimize facility designs and ensure compliance with company specifications, safety requirements, and regulatory standards.
• Maintains and updates standard drawings, facility drawings, and company drafting libraries to support ongoing operations and project needs.
• Operates independently as a selfstarter, completing assignments with minimal supervision while managing priorities effectively.
• Develops complete, timely, and accurate drawing packages for new, expanded, or modified facilities, supporting project objectives and construction schedules.
• Reviews drawings to verify compliance with applicable codes, regulations, and company standards, identifying and resolving discrepancies as needed.
• Evaluates design concepts and performs required engineeringrelated calculations to ensure accuracy and feasibility.
• Manages drawing documentation by organizing and maintaining drawing files, indexes, revision histories, and digital records in accordance with company documentcontrol procedures.
• Completes site visits with engineering and operations teams to ensure drawing accuracy as needed.

• Microstation experience preferred.
• Experience with 3D drawings or modeling.
• Experience with natural gas pipeline and compressor station design.
• Strong math skills, including geometry, trigonometry, and higher mathematics.
• Demonstrated knowledge of mechanical, structural, and electrical engineering design drafting principles.
• Knowledge of national gas codes, Pipeline Safety Regulations, and related codes and standards.
• Excellent planning and organizational skills.
• Ability to work independently.
• Ability to size and design structural steel and reinforced concrete components.
• Ability to develop applications for the CADD system.
• Strong communication skills, and ability to develop rapport with internal and external customers.
• Strong computer skills, including the CADD system.

Compensation details: 5

PI1bbb8d7dfb96-3631