Cable Remote Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :  

• This position is for a variety of shifts   

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Description

Key job responsibilities Partner with cable vendors to install, inspect and troubleshoot cabling Installation and maintenance of copper and fiber cable infrastructure Install, test and troubleshoot fiber optic and copper cabling, including patch panels and patch cords
Ensure that the Data Center and vendor installations comply with all installation practices
Report current status via ticketing system, status reports, email and slack
Manage work and priorities through ticketing system and workflows to complete customer requests and projects
Maintain accurate records and document problems and processes to successfully draft and execute changes within data centers
Exhibit quality workmanship on all work and maintain site cleanliness
Work with a partner to move integrated enterprise equipment from loading docks into planned positions
Manage, check and coordinate all materials to be delivered to site daily
Carry cell phone for communication, information, and emergencies
Up to 50% travel within geographical work area may be required; some travel outside traditional work area may be requested.

Infrastructure Delivery Install Technician. Our Infrastructure team is responsible for day to day installation of servers and network equipment, structured cabling, project work and capacity management. This technician will also be involved with installation of structured cabling, management of infrastructure inventory levels, physical installation of network and server racks and/or devices.

This position requires the successful candidate report to a site location. You will work in a dynamic environment to drive the stability and sustainability of our next-generation networks and assist in the development of innovative ways to automate and scale our network. You will launch cutting edge server technologies and solve diverse networking impairments. You will quickly and accurately assess a wide range of infrastructure issues, which requires a good understanding of computers, servers, switches and various networking devices from both a hardware and software perspective and a demonstrated willingness to learn and apply new technology. To be successful in this role you should possess technical aptitude, written and oral communications skills and the ability to deal effectively with people in a wide variety of situations. In addition, you must possess strong analytical skills with demonstrated problem solving ability. You will be able to leverage your experience exercising high levels of initiative, judgment, and diplomacy.

Experience Level

Entry Level

This is a Contract position based out of New Carlisle, IN.

The pay range for this position is $22.00 - $22.00/hr.

Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in New Carlisle,IN.

This position is anticipated to close on Mar 20, 2026.

We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

• This position requires an active DoD Clearance (Secret, Top Secret, Top Secret/SCI) or the ability to be obtain an (Interim Secret, Interim Top Secret)

• Because an active or interim DoD clearance is required, U.S. Citizenship is required 

Job Description

Responsibilities

• This technician will support a large federal agency's Network Infrastructure through survey, design, and deployment of structured networks and will be responsible for the upkeep of the security posture of the environment
• This is accomplished through projects such as new installations, life cycle replacement projects, Cable Plant and wireless installations that are compliant with commercial, TEMPEST, and NIST standards
• Lead network survey, design and installations under direction of the government
• analyze, test, troubleshoot, and evaluate existing network systems, such as local area networks (LAN), wide area networks (WAN), cloud networks, servers, and other data communications networks.
• Perform network maintenance to ensure networks operate correctly with minimal interruption.
• Knowledge of DISA network topologies and standards
• Topology and rack elevations using Visio
• Create detailed Site Survey reports detailing a site's current infrastructure, NIST and TEMPEST compliance, along with design recommendations
• Configure, install, test, certify, and troubleshoot network infrastructure cabling
• Ensure Network cabling infrastructure is compliant with current NIST and TEMPEST Standards
• Build and install equipment racks
• Install, dress, label, and terminate Cat6 and Fiber cable in telecommunications rooms
• Test and troubleshoot network infrastructure issues on SIPR and NIPR networks
• Create accurate reports and documentation to design/certify network infrastructure
• Track, manage, and ensure project tasks are completed in a timely manner
• Develop Bills of Material (BOM) for network plant design requirements
• Plan and perform preventive maintenance and scheduled upgrades (Life-cycle replacements)
• Investigate physical faults in the network
• Report network infrastructure deployment status to key stakeholders

Qualifications

• Must hold an active Secret security clearance
• (US Citizenship required)
• Security + Certification 

Additional Requirements:

• Organizes and directs network installations on site surveys.
• Assesses and documents current site network configuration and user requirements.
• Designs and optimizes network topologies.
• Directs and leads preparation of engineering plans and site installation Technical Design Packages.
• Develops installation schedules.
• Mobilizes network installation team.
• Directs and leads preparation of drawings documenting configuration changes at each site.
• Prepares site installation and test reports.
• Coordinates post installation operations and maintenance support.

Skills

Network engineering, Router, Firewall, Troubleshooting, Infrastructure, Ccna

Top Skills Details

Network engineering,Router,Firewall,Troubleshooting,Infrastructure,Ccna

Additional Skills & Qualifications

In addition to standard installer skillsets, candidates should possess the following:

• Cable installation and termination (fiber and copper)

• Rack and stack of network equipment

• Basic troubleshooting and testing of network connections

• Ability to read and follow network diagrams and installation plans

• Familiarity with structured cabling standards and labeling

Candidates with networking certifications (e.g., Network+, CCNA, Aruba, Versa) will be preferred.

Experience Level

Expert Level

This is a Contract position based out of Fort Meade, MD.

The pay range for this position is $39.00 - $40.00/hr.

Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in Fort Meade,MD.

This position is anticipated to close on Mar 24, 2026.

We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

• Receives maps and staking sheets for the full construction project and ensures project is built, with limited guidance from supervisors.
• Communicates updates to the project team as required.
• Manages daily and weekly project work based on deadlines, material and equipment availability, weather, and other factors.
• Coordinates with supervisor to ensure continual supply of work and availability of materials.
• Drafts and submits redlines upon completion of project.
• Ensures locates are performed on time and prior to team and equipment arriving at the worksite.
• Regularly engages municipalities, utility companies, suppliers, contractors, and property owners in order to smoothly coordinate project tasks and avoid disputes.
• Reads construction plans and municipality permits, and determines approach for completing work.
• Maintains all project documentation and records costs of project materials and material transfers.
• Ensures DOT inspections are performed on equipment.
• Works with project managers to ensure projects remain on schedule and within budget.
• Performs general construction labor in various weather conditions while utilizing safety fundamentals.
  • Advanced operation of trenchers, backhoes, end loaders, plows, and other excavating equipment to construct and maintain outside plant cable facilities.
  • Advanced operation of all test equipment associated with outside plant facilities and construction duties.
  • Installs, troubleshoots, tests, splices, repairs, and maintains fiber optic facilities.
  • Identifies location of defective cable using various test equipment and repairs buried, aerial, underground, and/or customer cable.
  • Locates cable and fiber in response to customer requests and/or construction needs.
  • Performs cable fault acceptance tests on newly constructed facilities.
• Actively trains, monitors, and coaches team members while sharing construction knowledge and experience. Performs quality control inspections and makes training recommendations. Ensures safety protocols are enforced.
• Services, cleans, maintains, and repairs equipment.
• Completes all related paperwork in a timely manner.
• Provides assistance to field services technicians, as needed.

• 2+ years of construction equipment operation utilizing various underground and aerial construction equipment such as directional drills, trencher/plow/rock saw, backhoe, or bucket trucks -OR- current military service, or prior military service with honorable discharge.
• 1+ years of experience leading construction projects as a crew foreperson or project manager.
• Must follow the TDS attendance guidelines in order to meet TDS's business needs including but not limited to our obligations to our customers and to our customers' needs.
• Must have and maintain a valid driver's license and remain eligible for DOT requirements.

• Must have the ability to obtain a Class A CDL. A current CDL is preferred at hire, but TDS will train and certify eligible associates through its in-house CDL certification program after hire.
• Physical requirements may vary based on company needs: Ability to climb poles, ladders, towers, and other structures as needed. Ability to kneel, dig, lift, and pull.
• Upon hire, must successfully pass all components of the Safety Training course curriculum.
• Upon hire, must successfully complete customer-specific requirements, which may include a background check administered by the customer.
• Preferred 2+ years' experience in the construction of fiber optic cable outside plant networks -OR- 2+ years installation of any underground or overhead utilities will be considered.
• Understanding of telecommunication products and services.
• Proven organizational skills and ability to multi-task.
• May require occasional travel.
• Must be willing to work overtime as needed. May be required to work various/swing shifts as business needs dictate.
• Must be able to operate vehicles with manual transmissions.

• Medical Coverage
• Dental Coverage
• Vision Coverage
• Life Insurance
• 401(k) Plan
• Generous Vacation & Paid Sick Leave
• Seven Paid National Holidays & One Floating Holiday
• Paid Parental Leave (6 weeks after 12 months of employment)
• Adoption & Surrogacy Assistance
• Employee Assistance & Wellness Programs

• Short-Term & Long-Term Disability
• TDS Service Discounts
• Education Assistance
• Paid Volunteer Time

• Receives maps and staking sheets for the full construction project and ensures project is built, with limited guidance from supervisors.
• Communicates updates to the project team as required.
• Manages daily and weekly project work based on deadlines, material and equipment availability, weather, and other factors.
• Coordinates with supervisor to ensure continual supply of work and availability of materials.
• Drafts and submits redlines upon completion of project.
• Ensures locates are performed on time and prior to team and equipment arriving at the worksite.
• Regularly engages municipalities, utility companies, suppliers, contractors, and property owners in order to smoothly coordinate project tasks and avoid disputes.
• Reads construction plans and municipality permits, and determines approach for completing work.
• Maintains all project documentation and records costs of project materials and material transfers.
• Ensures DOT inspections are performed on equipment.
• Works with project managers to ensure projects remain on schedule and within budget.
• Performs general construction labor in various weather conditions while utilizing safety fundamentals.
  • Advanced operation of trenchers, backhoes, end loaders, plows, and other excavating equipment to construct and maintain outside plant cable facilities.
  • Advanced operation of all test equipment associated with outside plant facilities and construction duties.
  • Installs, troubleshoots, tests, splices, repairs, and maintains fiber optic facilities.
  • Identifies location of defective cable using various test equipment and repairs buried, aerial, underground, and/or customer cable.
  • Locates cable and fiber in response to customer requests and/or construction needs.
  • Performs cable fault acceptance tests on newly constructed facilities.
• Actively trains, monitors, and coaches team members while sharing construction knowledge and experience. Performs quality control inspections and makes training recommendations. Ensures safety protocols are enforced.
• Services, cleans, maintains, and repairs equipment.
• Completes all related paperwork in a timely manner.
• Provides assistance to field services technicians, as needed.

• 2+ years of construction equipment operation utilizing various underground and aerial construction equipment such as directional drills, trencher/plow/rock saw, backhoe, or bucket trucks -OR- current military service, or prior military service with honorable discharge.
• 1+ years of experience leading construction projects as a crew foreperson or project manager.
• Must follow the TDS attendance guidelines in order to meet TDS's business needs including but not limited to our obligations to our customers and to our customers' needs.
• Must have and maintain a valid driver's license and remain eligible for DOT requirements.

• Must have the ability to obtain a Class A CDL. A current CDL is preferred at hire, but TDS will train and certify eligible associates through its in-house CDL certification program after hire.
• Physical requirements may vary based on company needs: Ability to climb poles, ladders, towers, and other structures as needed. Ability to kneel, dig, lift, and pull.
• Upon hire, must successfully pass all components of the Safety Training course curriculum.
• Upon hire, must successfully complete customer-specific requirements, which may include a background check administered by the customer.
• Preferred 2+ years' experience in the construction of fiber optic cable outside plant networks -OR- 2+ years installation of any underground or overhead utilities will be considered.
• Understanding of telecommunication products and services.
• Proven organizational skills and ability to multi-task.
• May require occasional travel.
• Must be willing to work overtime as needed. May be required to work various/swing shifts as business needs dictate.
• Must be able to operate vehicles with manual transmissions.

• Medical Coverage
• Dental Coverage
• Vision Coverage
• Life Insurance
• 401(k) Plan
• Generous Vacation & Paid Sick Leave
• Seven Paid National Holidays & One Floating Holiday
• Paid Parental Leave (6 weeks after 12 months of employment)
• Adoption & Surrogacy Assistance
• Employee Assistance & Wellness Programs

• Short-Term & Long-Term Disability
• TDS Service Discounts
• Education Assistance
• Paid Volunteer Time

Granite delivers advanced communications and technology solutions to businesses and government agencies throughout the United States and Canada. We provide exceptional customized service with an emphasis on reliability and outstanding customer support and our customers include over 85 of the Fortune 100. Granite has over $1.85 Billion in revenue with more than 2,100 employees and is headquartered in Quincy, MA. Our mission is to be the leading telecommunications company wherever we offer services as well as provide an environment where the value of each individual is recognized and where each person has the opportunity to further their growth and achieve success.

Granite has been recognized by the Boston Business Journal as one of the "Healthiest Companies" in Massachusetts for the past 15 consecutive years.

Our offices have onsite fully equipped state of the art gyms for employees at zero cost.

Granite's philanthropy is unparalleled with over $300 million in donations to organizations such as Dana Farber Cancer Institute, The ALS Foundation and the Alzheimer's Association to name a few.

We have been consistently rated a "Fastest Growing Company" by Inc. Magazine.

Granite was named to Forbes List of America's Best Employers 2022, 2023 and 2024.

Granite was recently named One of Forbes Best Employers for Diversity.

Our company's insurance package includes health, dental, vision, life, disability coverage, 401K retirement with company match, childcare benefits, tuition assistance, and more.

If you are a highly motivated individual who wants to grow your career with a fast paced and progressive company, Granite has countless opportunities for you.

EOE/M/F/Vets/Disabled

General Summary of Position:

• 
  
• Prospecting, cold calling and selling our structured cabling products and services to national companies.
  
• Building and maintaining a sales funnel.
  
• Effectively communicate and demonstrate the features and values of our business.
  
• Identify prospect needs and develop action plans and proposals; Deliver in person and online presentations.
  
• Close the deal and maintain positive client relationships.
  
• Create additional revenue opportunities.
  
• Achieve and exceed sales goals.
  
• Develop a clear understanding of Granite's cabling products and services: Managed Services, Cabling Projects, Wi-Fi projects and Rollouts.
  
• You will be selling infrastructure engineering and network installations for voice, data, video, security, and wireless solutions.
  

Duties and Responsibilities:

• 
  
• Prospecting, cold calling and selling our structured cabling products and services to national companies.
  
• Building and maintaining a sales funnel.
  
• Effectively communicate and demonstrate the features and values of our business.
  
• Identify prospect needs and develop action plans and proposals; Deliver in person and online presentations.
  
• Close the deal and maintain positive client relationships.
  
• Create additional revenue opportunities.
  
• Achieve and exceed sales goals.
  
• Develop a clear understanding of Granite's cabling products and services: Managed Services, Cabling Projects, Wi-Fi projects and Rollouts.
  
• You will be selling infrastructure engineering and network installations for voice, data, video, security, and wireless solutions.
  
• Bachelor's Degree Preferred
  

#LI-GC1

• Reviews and documents customer requirements and designs products in compliance with stated requirements, focusing on ease of manufacturing with high reliability.
• Develop prototypes, oversee testing/qualification, and ensure compliance with industry and customer performance standards.
• Partner with Manufacturing to address cost reduction, quality improvement, and customer issue resolution.
• Stay current with technological trends and emerging interconnect solutions including power interconnect innovations to guide future product development.
• Checks and/ or approves engineering drawings, parts lists, and test sheets
• Ensures all ECNs are processed efficiently, effectively, and consistently.
• Correspondence with customers and suppliers as needed to ensure customer satisfaction is maintained
  

• Bachelor's degree in mechanical engineering, Electrical Engineering, or a related technical field.
• 3+ years of experience in connector and/or cable assembly design and development.
• Strong analytical, problem-solving, and design skills.
• Excellent communication and interpersonal skills with the ability to collaborate across global teams.
• Proficiency in 3D modeling tools (e.g., Creo) and Product Data Management systems (e.g., Windchill) preferred.
• Proficient in using DFMEA to evaluate and mitigate risks in mechanical assemblies and design analyses.
  

Reports To: Team Lead Technician / Project Manager

Summary

The Field Technician is responsible for supporting the installation, testing, and servicing of

low-voltage systems under the direction of a Team Lead Technician. This role focuses on

executing installation tasks with precision, maintaining jobsite productivity, and upholding

company quality and safety standards.

The Field Technician plays a key role in project execution by performing hands-on technical

work, maintaining organized job sites, and contributing to efficient project delivery.

Key Responsibilities

Installation & Technical Support

• Install and support low-voltage systems including:
• Structured cabling (Cat5e, Cat6, Cat6A, fiber optic)
• Security systems (IP cameras, access control, intrusion detection)
• MDF/IDF buildouts and network rack installations
• Conduit, pathways, and cable management systems
• Pull, terminate, label, and test copper and fiber cabling
• Assist with device mounting, rack assembly, and system hardware installation
• Follow installation plans, drawings, and instructions provided by the Team Lead
• Maintain installation quality according to manufacturer specifications and company standards

Jobsite Support & Execution

• Follow direction from the Team Lead Technician to complete assigned daily tasks
• Maintain productivity and adhere to project timelines
• Keep job sites clean, organized, and professional
• Assist with material handling, staging, and inventory tracking
• Support punch list completion and project closeout tasks

Testing & Documentation

• Assist with cable testing and certification
• Label cables, racks, and devices accurately
• Support as-built documentation and reporting
• Report installation issues or discrepancies to the Team Lead promptly

Safety & Compliance

• Follow OSHA and company safety policies at all times
• Use proper PPE and maintain safe work practices
• Safely operate ladders, lifts, power tools, and company equipment
• Participate in job hazard assessments and safety meetings

Required Qualifications

• 1–3+ years of experience in the low-voltage industry preferred (entry-level candidates with relevant construction or technical experience considered)
• Basic knowledge of structured cabling and security system installations
• Ability to use hand tools, power tools, and testing equipment
• Ability to read basic drawings and follow technical instructions
• Strong work ethic and willingness to learn
• Valid driver’s license with acceptable driving record
• Ability to lift up to 50 lbs and work on ladders and lifts
• Ability to pass background check and drug screening

Preferred Certifications (Not Required)

• OSHA 10
• BICSI Installer (Level 1)
• Manufacturer training certifications
• Fiber termination training

Work Environment

• Field-based role on commercial and industrial job sites
• Indoor and outdoor environments
• Travel to job sites as required
• Occasional overtime based on project schedules

Performance Expectations

• Maintain quality installation standards
• Demonstrate reliability, punctuality, and accountability
• Follow direction and work effectively within a team
• Contribute to meeting project deadlines
• Uphold company culture and safety standards

Position Description

Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Dallas, Texas

Hear it from a Torque Mobile Mechanic Technician Here:

• 
  
• Technician Positions Pay Each Week
  
  
• Hourly Pay: $38.00 per hour
  
  
• Retention Bonus: $2000 paid every quarter within the first year
  
  
• Schedule: Flexible 40-hour work week (weekend premiums apply)
  
  
• Fuel Card and Company Cell Phone provided
  
  
• For mobile technicians, work site service vehicle will be provided
  
  
• Grow with Ryder: This position provides additional training to level up.
  
  

We want the right Maintenance Repair Mechanic Technician to join us at Ryder to manage our fleet of Heavy Duty Trucks.

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Kim or text “Dallas” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities

Click Here to See All Ryder Careers:

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Diagnostics and repairs, including AC, electrical systems
  
  
• Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs
  
  
• Four (4) years or more Relevant work experience, preferred
  
  
• NonCommercial Driver License CLASS E, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A, preferred
  
  
• Other State driver's license, as required
  
  
• Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to:
  
  
• Understand and adhere to Company policies in all areas
  
  
• Complete repair orders with the Company established systems
  
  
• Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Work independently and as a member of a team
  
  
• Prioritize workload
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Demonstrates customer service skills
  
  
• Strong verbal and written communication skills
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Preventive Maintenance (PM230&PM298) within 90 Days
  
  
• Brakes-Air (BA220&BA298) within 90 Days
  
  
• Brake mechanics/inspectors FMCS 396.25
  
  
• Hydraulic Brake (BH220&BH298) where appropriate within 90 Days
  
  
• Tire & Wheel TW220 within 90 Days
  
  
• CF609 & A/C trained and qualified (AC220&AC298) within 180 Days
  
  
• HD electrical - DR208 within 90 Days
  
  
• Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days
  
  
• Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix)
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair
  
  
• Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support
  
  
• Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable
  
  
• Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Instructs and advises other technicians regarding maintenance repair procedures and diagnostics
  
  
• Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction.
  
  
• Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Performs other duties as assigned.
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements.
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer.
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 1 day ago (3/17/2026 1:49 PM)

Requisition ID 2

Location (Posting Location) : State/Province TX

Location (Posting Location) : City DALLAS

Location (Posting Location) : Postal Code 75247

Category Technicians/Service Employees9

Employment Type Regular-Full time

Travel Requirements Greater than 60%

Position Code 1001374

Min Pay USD $38.00/Hr.

Max Pay USD $38.00/Hr.

Job Location:

Sacramento, CA 95834.

About the Job:

Title of the Position: Automation Technician

The Automation Technician ensures reliable operation of sterile pharmaceutical manufacturing systems by installing, maintaining, calibrating, and troubleshooting automation components, process instrumentation, drives, motors, control devices, clean utility systems, and aseptic production equipment. The role supports continuous and compliant operations under cGMP, FDA 21 CFR Part 11, and cleanroom standards.

Responsibilities:

• Install, maintain, calibrate, and troubleshoot sensors and transmitters for pressure, temperature, flow, level, pH, conductivity, and environmental monitoring.
• Support in performing GMP‑compliant calibrations with complete traceability and accurate documentation.
• Install, maintain, and troubleshoot motors, pumps, fans, drives, control devices, and sterile manufacturing equipment.
• Perform conduit bending, cable routing, wire pulling, cable termination, tray installation, and equipment connections in accordance with plant procedures.
• Install and modify control panels, junction boxes, and instrumentation assemblies.
• Diagnose issues in circuits, protection components, sensors, actuators, drives, and automated machines.
• Use diagnostic tools such as multimeters, clamp meters, insulation testers, and calibration instruments.
• Support PLC, HMI, SCADA, BMS, and EMS platforms, including troubleshooting and system checks.
• Conduct loop checks, functional tests, FAT/SAT, commissioning, and support validation activities (IQ/OQ/PQ).
• Maintain and troubleshoot systems for PW, WFI, Clean Steam, CIP/SIP, HVAC/HEPA controls, and aseptic filling/packaging operations.
• Read and interpret P&IDs, wiring diagrams, schematics, ladder logic, and loop drawings.
• Maintain cleanroom support systems, including differential pressure controls, HEPA filtration, and environmental monitoring.
• Ensure compliance with cGMP, cleanroom classification requirements, FDA 21 CFR Part 11, and data integrity principles.
• Perform preventive, corrective, and predictive maintenance.
• Conduct root‑cause analysis and implement CAPA actions.
• Maintain accurate CMMS entries, calibration logs, and audit‑ready documentation.

Working Condition:

• Ability to work rotating, weekend, or extended shifts.
• Exposure to high‑noise areas (PPE provided).
• Frequent work on mezzanine floors, elevated platforms, ladders, and step‑ups.
• Work inside aseptic cleanrooms and controlled environments (ISO 5/7/8) wearing full gowning.
• Exposure to hot, cold, humid, or pressurized utility systems such as PW, WFI, Clean Steam, and HVAC units.
• Occasional work in tight spaces, behind panels, or equipment enclosures.
• Regular use of PPE, including sterile gowning, gloves, and eye protection.
• Ability to lift to 50 lbs and perform hands-on tasks for extended periods.

Qualifications:

Education:

• BE – Mechanical/Chemical from a reputed University

Experience: Minimum 5 to 10 years of professional experience in the field of pharmaceutical or manufacturing industry.

Knowledge, Skills, and Abilities: Functional:

• Strong troubleshooting skills across sensors, transmitters, motors, drives, actuators, control components, automated machinery, and process systems.
• Experience with conduit bending, tray installation, cable pulling, wire routing, cable dressing, and termination.
• Proficiency in installing and modifying panels, junction boxes, and equipment assemblies.
• Skilled in using multimeters, clamp meters, insulation testers, and calibration devices.
• Ability to install, connect, and terminate control wiring and instrument cabling for field devices.
• Understanding of circuits, drives, starters, protection components, actuators, and control system diagnostics.
• Ability to read and interpret P&IDs, schematics, wiring diagrams, ladder logic, and loop documentation.
• Knowledge of GMP requirements, sterile manufacturing, cleanroom practices, aseptic operations, and validation processes.
• Strong documentation discipline, attention to detail, and audit readiness.
• Ability to work efficiently and safely in regulated manufacturing environments.

Behavioral:

• Result oriented
• Innovative thinking
• Time Management, Professional Work Conduct at all times
• Problem-solving ability & High level of self-motivation
• Strong interpersonal relationship skills
• Strong written & verbal communication skills

Requirements:

• Valid driver's license and acceptable driving record
• Legally authorized to be employed in the United States
• Must live or be willing to move to the Sacramento Metropolitan Region (Approx 40 miles' radius)

Benefits:

• Competitive Salary: $80,000 - $90,000
• Yearly bonus eligibility
• Benefits: offers a wide variety of benefits and programs to support health and well-being, including medical, dental, and vision coverage
• Paid time off plan
• 401k savings plan

Wallace William is looking for multiple Structured Cabling and Low Voltage Technicians to work on large new and existing construction projects in NYC.

Responsibilities:

• Pull Cat5e, Cat6, Cat6a cables and fiber optic cabling systems.
• Installation of data equipment, including data racks, patch panels, cable trays, high level understanding of IDF, MDF build outs.
• Experience with jack and patch panel terminations.
• Utilizes appropriate testing equipment to test installed cables.
• Run security wiring and installation of CCTV and Access Control Panels

Qualifications:

• Must have all your low voltage hand tools and PPE Gear.
• Must have your OSHA 30 and SST

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a Industrial Maintenance Electrician you will be a vital part of our manufacturing team installing, maintaining electrical equipment. Operate, install electrical systems and preform functional of building and plant equipment.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Operate, install electrical systems and perform functional testing of building and plant equipment (e.g., machines, motor controls, room re-models)

• Determine if system should be shut down or work must be performed with power source on

• Lock out, tag out, try out equipment and related systems

• Perform primary and secondary testing on electrical breakers during routine maintenance; replace, update and retro fit breakers

• Perform routine tests on high voltage switches and relays, using hi-potential test equipment (Hipot), replace switch or relay

• Troubleshoot electric motors using appropriate test equipment

• Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system

• Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel

• Service and maintain electrical systems on various types of overhead cranes

• Operate, install electrical systems and perform functional test of building and plant equipment (e.g., machines, motor controls, room re-models)

• Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent, halide, standard); clean and check sockets, and replace ballast and bulbs

• Run high voltage electrical cable from sub-station to unit station; cut and splice cable, test cable for resistance

• Install, replace and repair fiber optic cable for computers and computing systems

• Bend conduit and install junction boxes; pull wire of various gauge and color through conduit using a fish tape; install and connect switches and outlets

• Check work after completion or after each operation; ensure job is per drawing and WAC, NEC codes; evaluate job for work to be performed (e.g., wire size, electrical load, conduit)

• Operate mechanical lifts of various types (e.g. tiger lift, spider lift, snorkel lift), to access work areas

• Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in plant electrical systems

• Establish/verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters)

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 3+ years of experience as an Electrician or Apprentice.

• 1+ years of experience maintaining industrial equipment.

• Experience working from heights and using fall protection equipment with weight limitations .

• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

• Must be able to complete fall protection training.

Preferred Qualifications:

• Electrician license (EL01 &/or EL 07) or an electrical card.

• Crane related experience.

• Experience with prime power.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidate must live in the immediate are or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $33.32 per hour – $61.01 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

How You'll Contribute:

The installation technician is responsible for performing a wide variety of installation duties on technology projects for our clients. This position is the key field position for the bulk of the actual work that gets done in our clients buildings. The install tech needs to coordinate with project management, field superintendents and others to fully understand their role on specific projects. They interpret our drawing packages to create the basis of the finished systems. This installation can include displays, projectors, loudspeakers, microphones, equipment racks, etc. Will also provide advice and guidance to Associate Installation Technicians as necessary.

Location: Must live in the Washington DC - VA area.

What You'll Do:

• 
  
  
• Perform structured cabling installation: pull, terminate, label, and dress cables per project documentation and standards.
  
  
• Complete physical installation and wiring of AV devices (displays, speakers, microphones, cameras, control interfaces, etc.).
  
  
• Assemble, populate, and dress equipment racks with a high degree of workmanship and adherence to design documents.
  
  
• Solder and terminate connectors according to project specifications and accepted industry practices.
  
  
• Execute light physical construction tasks as required (e.g., blocking, mounting surfaces, hardware installation).
  
  
• Follow Diversified's installation procedures, quality guidelines, and safety protocols with minimal deviation.
  
  
• Maintain accurate daily records: timesheets, daily field reports, checklists, and as-built documentation.
  
  
• Collaborate effectively with Project Managers, Engineers, and Lead Technicians to ensure project milestones are met.
  
  
• Represent Diversified professionally on active job sites, including client and construction environments.
  
  
• Actively participate in ongoing training and skill development toward advancing technical proficiency.
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients job sites with little supervision. On smaller projects this position may be responsible for the coordination with clients, contractors and subcontractors.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general the project manager and a site supervisor are available to answer questions. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to mobile around the construction site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 40 pounds in construction areas. The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis.

What You'll Bring:

Education/ Certifications:

* High school or GED equal
* AVIXA CTS Certification is desired.
* Must have a valid drivers license and adhere to our insurance requirements
* OSHA 30 Certificate is highly desired. (NYC OSHA30 is desired)
* Other relevant certifications may be required or preferred based on the technology focus of the position.

Required Skills/Qualifications:

• 
  
  
• 1+ years as an associate technician and/or fabrication technician or related industry experience.
  
  
• Proven ability to perform core AV installation tasks with minimal direct instruction.
  
  
• Competency with hand tools, power tools, and installation materials required for AV integration.
  
  
• Strong understanding of cabling types, termination techniques, and device mounting requirements.
  
  
• Ability to interpret functional design drawings, cable riser diagrams, and architectural drawings.
  
  
• Comfortable working on ladders, lifts, and in construction environments.
  
  
• Strong work ethic, attention to detail, and commitment to quality workmanship.
  
  
• Effective communication skills and ability to collaborate within a project team.
  
  
• Flexibility and adaptability to evolving site conditions and project priorities.
  
  

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

• 
  
• Troubleshoots and resolves malfunctions to machine control systems and makes recommendations to improve efficiency or address quality concerns
  
• Experience and proficiency with ladder logic/PLC programming, Siemens experience required
  
• Develops new and modifies existing PLC and/or HMI applications, interfaces, or embedded control systems
  
• Participates in the set-up and commissioning of new systems or the upgrading of current systems
  
• Knowledge of AC and DC circuitry and electrical concepts
  
• Versatile in ladder logic and various PLC programming languages. Working knowledge of field control devices (motors, relays, switches, photoeyes, etc.)
  
• Designs, develops, maintains, and modifies instrumentation and control systems
  
• Start to finish electrical control system hardware design experience (control panel and field wiring)
  
• Competency in Electrical CAD
  
• Ability to work independently as well as in a team environment
  

• 
  
• Working knowledge of power distribution, networks, PLC, HMI, and drive hardware and software
  
• Ability to read and create schematic drawings using AutoCAD software
  
• Must be able to communicate effectively with Operators, Technicians, Management,a nd others
  
• Ability to work independently as well as in a team environment
  
• Must possess a sense of urgency and ownership when working within time constraints
  
• Must have strong computer skills and be proficient in Microsoft Word and Excel
  

• 
  
• Action Oriented
  
• Balances Stakeholders
  
• Collaborates
  
• Customer Focus
  
• Nimble Learning
  
• Plans and Aligns
  

• 
  
• 401k with Matching
  
• Family and Individual Insurance Packages (Health, Life, Dental, and Vision)
  
• Paid Time Off & Paid Holidays
  
• Long & Short-Term Disability
  
• Supplemental Insurance Plans
  
• Employee Assistance Program
  
• Employee Referral Program
  
• Tuition Reimbursement Programs
  
• Advancement & Professional Growth opportunities
  
• Parental Leave
  
• & More
  

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

Job Summary:

The installation technician is responsible for performing a wide variety of installation duties on technology projects for our clients. This position is the key field position for the bulk of the actual work that gets done in our clients buildings. The install tech needs to coordinate with project management, field superintendents and others to fully understand their role on specific projects. They interpret our drawing packages to create the basis of the finished systems. This installation can include displays, projectors, loudspeakers, microphones, equipment racks, etc. Will also provide advice and guidance to Associate Installation Technicians as necessary.

Primary Duties and Responsibilities:

• 
  
  
• Possess all skills from Associate Install Technician and most skills from the Associate Fabrication Technician job descriptions to install components and make modifications on site as necessary to complete the project
  
  
• Physical installation of a wide variety of technology into a wide variety of locations.
  
  
• Execute a wide variety of cabling terminations for all wire and connector types and ability to test completed terminations.
  
  
• Support the preparation of equipment racks for staging of equipment wire lacing including installation of power strips, grounding bars, jack-fields, etc.
  
  
• Able to read and understand functional design drawings as well as cable riser diagrams and all architectural drawings.
  
  
• Able to assist in the mounting of base build equipment such as monitor mounts, ceiling speakers' microphones and projectors.
  
  
• Provide a consistent level of technical performance as well as flexibility in work schedule. This position requires periodic overtime and may require regular overtime for extended periods to meet fabrication deadlines
  
  
• Able to complete assignments in accordance with or better than established task durations as well as estimate task durations to meet assigned deadlines. Provides daily feedback to Project Manager, or Site Superintendent.
  
  
• Able to build and wire custom designs from engineering drawings.
  
  
• Fiber optic cable handling, installation termination and testing.
  
  
• Can print and make minor corrections to cable labels.
  
  
• Maintain an organized work environment specifically orderliness and cleanliness of the shop and jobsites.
  
  
• Responsible for maintaining their toolkit, company vehicles and installation materials inventories. Keeping things clean, orderly and well documented.
  
  
• Responsible for maintaining their personal licenses, certifications and qualifications. (some states have specific requirement in this area)
  
  
• Maintain daily record of time worked on specific projects for timesheet entry and work performed reports
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients job sites with little supervision. On smaller projects this position may be responsible for the coordination with clients, contractors and subcontractors.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general the project manager and a site supervisor are available to answer questions. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to mobile around the construction site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 40 pounds in construction areas. The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis.

Job Qualifications:

Education/Certifications:

• 
  
  
• High school or GED equal
  
  
• AVIXA CTS Certification is desired.
  
  
• One or more years as an associate technician and/or fabrication technician or related industry experience.
  
  
• Must have a valid drivers license and adhere to our insurance requirements
  
  
• OSHA 30 Certificate is highly desired.
  
  
• Other relevant certifications may be required or preferred based on the technology focus of the position.
  
  
• Required/Desired Knowledge, Experience and Skills:
  
  
• Familiarity with a wide range of audio, video and networking equipment
  
  
• Knowledgeable of low voltage electrical concepts
  
  
• Possess basic carpentry and/or installation skills
  
  
• Proficient use and safety with power tools
  
  
• Good verbal communication skills and good customer service skills.
  
  
• Ability to diagnose, troubleshoot and resolve technical problems
  
  

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

Security Sales Executive – Structured Cabling & Critical Infrastructure

Mileage Reimbursement + Profit Share + Full Benefits

Benefits Include: Health Insurance, 401(k), Profit Sharing

Status: Full-Time

We Are Actively Interviewing

We are seeking a driven, technology-minded Security Sales Executive who thrives in a fast-paced environment and knows how to build lasting client relationships. This role is ideal for someone with security sales experience who understands the value of structured cabling and critical infrastructure solutions. If you are self-motivated, internally driven, and ready to grow with a company that rewards performance, we want to speak with you.

We believe in doing business the right way: tell the truth, do your best, make it right if something goes wrong, and communicate consistently. Our team rolls up their sleeves, supports one another, and takes pride in delivering real value to clients.

What You’ll Do

• Develop and grow new business within security systems and structured cabling markets
• Leverage existing industry relationships to generate qualified opportunities
• Sell solutions supporting critical infrastructure environments
• Collaborate with internal teams to ensure smooth project execution
• Maintain consistent communication with clients and leadership
• Represent the company with integrity and professionalism

What We’re Looking For

• Proven security sales experience
• Strong understanding of structured cabling systems
• Established industry network and relationship-building skills
• Experience selling into or supporting critical infrastructure environments
• College degree or military background preferred
• Highly self-motivated with a strong internal drive
• Excellent communication skills
• Team-oriented mindset — willing to roll up your sleeves
• Technology-minded with a solutions-focused approach

What We Offer

• Mileage reimbursement
• Profit sharing program
• Health benefits
• 401(k)
• Opportunity for growth within a supportive, high-performance team

Lineman / Utility Construction Worker

Location: Valparaiso / Fulton, IN | Industry: Critical Infrastructure (Power, Gas, & Telecom)

Position Summary

Join an industry-leading utility construction firm with over 95 years of experience providing critical infrastructure construction and maintenance services for the power, oil & gas pipeline, gas distribution, and communication markets throughout North America.

Essential Duties & Responsibilities

• Safety Compliance: Perform all duties according to prescribed safety procedures and utilize appropriate safety equipment at all times.
• Cable Installation: Install and relocate aerial and underground cables, including fiber optic, transportation, distribution, and drop cables, ensuring industry standards and technical reliability are met.
• Crew Support: Provide comprehensive support for line crews during all phases of construction activity.
• Equipment Operation: Operate digger derrick trucks for pole setting, pole transfers, anchor installation, and aerial construction support.

Knowledge, Skills & Abilities

• Equipment Experience: Hands-on experience operating digger derrick trucks specifically in utility or telecom construction.
• Technical Skills: Ability to climb poles to cable height using pole climber gaffs.
• Licensing: Must possess a valid motor vehicle operator license with a CDL Class A.
• Communication: Must be able to speak the English language fluently and clearly.
• Compliance: Ability to pass a pre-employment drug and alcohol test (with subsequent random testing) and a customer-driven background check.
• Certification: Completion of a pre-employment, on-site certification to demonstrate the ability to perform duties to the satisfaction of construction supervision.

Physical Requirements & Work Conditions

• Physical Demand: This role is physically demanding and requires significant manual labor, including walking on uneven ground and working in tight spaces.
• Lifting Requirements: Frequent lifting of up to 50 pounds and infrequent lifting of up to 100 pounds.
• Schedule: Ability to work up to 6 days per week in an all-weather environment.
• Travel: Must be willing to travel throughout multiple work sites as required.

Education & Experience

• Industry Experience: 2+ years of experience as a lineman.
• Safety Knowledge: Proven ability to detect power space violations and identify safety issues.