Cable Remote Codes Jobs in Usa

Position Description

Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Dallas, Texas

Hear it from a Torque Mobile Mechanic Technician Here:

• 
  
• Technician Positions Pay Each Week
  
  
• Hourly Pay: $38.00 per hour
  
  
• Retention Bonus: $2000 paid every quarter within the first year
  
  
• Schedule: Flexible 40-hour work week (weekend premiums apply)
  
  
• Fuel Card and Company Cell Phone provided
  
  
• For mobile technicians, work site service vehicle will be provided
  
  
• Grow with Ryder: This position provides additional training to level up.
  
  

We want the right Maintenance Repair Mechanic Technician to join us at Ryder to manage our fleet of Heavy Duty Trucks.

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Kim or text “Dallas” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities

Click Here to See All Ryder Careers:

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Diagnostics and repairs, including AC, electrical systems
  
  
• Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs
  
  
• Four (4) years or more Relevant work experience, preferred
  
  
• NonCommercial Driver License CLASS E, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A, preferred
  
  
• Other State driver's license, as required
  
  
• Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to:
  
  
• Understand and adhere to Company policies in all areas
  
  
• Complete repair orders with the Company established systems
  
  
• Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Work independently and as a member of a team
  
  
• Prioritize workload
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Demonstrates customer service skills
  
  
• Strong verbal and written communication skills
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Preventive Maintenance (PM230&PM298) within 90 Days
  
  
• Brakes-Air (BA220&BA298) within 90 Days
  
  
• Brake mechanics/inspectors FMCS 396.25
  
  
• Hydraulic Brake (BH220&BH298) where appropriate within 90 Days
  
  
• Tire & Wheel TW220 within 90 Days
  
  
• CF609 & A/C trained and qualified (AC220&AC298) within 180 Days
  
  
• HD electrical - DR208 within 90 Days
  
  
• Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days
  
  
• Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix)
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair
  
  
• Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support
  
  
• Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable
  
  
• Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Instructs and advises other technicians regarding maintenance repair procedures and diagnostics
  
  
• Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction.
  
  
• Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Performs other duties as assigned.
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements.
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer.
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 2 days ago (3/17/2026 1:49 PM)

Requisition ID 2

Location (Posting Location) : State/Province TX

Location (Posting Location) : City DALLAS

Location (Posting Location) : Postal Code 75247

Category Technicians/Service Employees9

Employment Type Regular-Full time

Travel Requirements Greater than 60%

Position Code 1001374

Min Pay USD $38.00/Hr.

Max Pay USD $38.00/Hr.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a Industrial Maintenance Electrician you will be a vital part of our manufacturing team installing, maintaining electrical equipment. Operate, install electrical systems and preform functional of building and plant equipment.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Operate, install electrical systems and perform functional testing of building and plant equipment (e.g., machines, motor controls, room re-models)

• Determine if system should be shut down or work must be performed with power source on

• Lock out, tag out, try out equipment and related systems

• Perform primary and secondary testing on electrical breakers during routine maintenance; replace, update and retro fit breakers

• Perform routine tests on high voltage switches and relays, using hi-potential test equipment (Hipot), replace switch or relay

• Troubleshoot electric motors using appropriate test equipment

• Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system

• Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel

• Service and maintain electrical systems on various types of overhead cranes

• Operate, install electrical systems and perform functional test of building and plant equipment (e.g., machines, motor controls, room re-models)

• Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent, halide, standard); clean and check sockets, and replace ballast and bulbs

• Run high voltage electrical cable from sub-station to unit station; cut and splice cable, test cable for resistance

• Install, replace and repair fiber optic cable for computers and computing systems

• Bend conduit and install junction boxes; pull wire of various gauge and color through conduit using a fish tape; install and connect switches and outlets

• Check work after completion or after each operation; ensure job is per drawing and WAC, NEC codes; evaluate job for work to be performed (e.g., wire size, electrical load, conduit)

• Operate mechanical lifts of various types (e.g. tiger lift, spider lift, snorkel lift), to access work areas

• Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in plant electrical systems

• Establish/verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters)

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 3+ years of experience as an Electrician or Apprentice.

• 1+ years of experience maintaining industrial equipment.

• Experience working from heights and using fall protection equipment with weight limitations .

• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

• Must be able to complete fall protection training.

Preferred Qualifications:

• Electrician license (EL01 &/or EL 07) or an electrical card.

• Crane related experience.

• Experience with prime power.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidate must live in the immediate are or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $33.32 per hour – $61.01 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Overview 

Mondo Media Solutions (MMS) is seeking a highly skilled Audio Video Field Installation Engineer to join our team. We specialize in full-service installations of audio, video, Theatrical lighting, access control, and surveillance systems for commercial applications. Located in Philadelphia, PA, this role offers both full-time and contract opportunities. 

Responsibilities 

• Lead installations, maintenance, and troubleshooting of commercial audio/video systems, including conference rooms, access control, and security camera systems. 
• Install projection systems, wiring, termination A/V systems, loudspeakers, cameras, and displays. 
• Troubleshooting basic network routers and switches. 
• Engage in DSP programming, particularly with Q-SYS, 
• Install and Troubleshoot conference room setups and equipment. 
• Fabricate racks, pull and dress cables, and manage cable terminations. 
• Provide friendly customer service during installation and servicing tasks. 
• Updating onsite installation software throughout the day. 

Requirements 

• Minimum 5 years of experience as a commercial A/V installer. 
• Must be able to independently diagnose and repair onsite issues with networking, security cameras, distributed audio systems, and conference room systems.  
• Proficient in DSP programming, preferably with QSYS, Extron 
• Experienced in control systems, QSC QSYS systems, including coding and troubleshooting. 
• Familiar with using power tools like drills, saws, and rotary hammers.
• Obtain or pass OSHA 10 certification within 30 days and Obtain or pass OSHA 30 certification within 90 days  
• CTS certification within 90 days 
• Strong organizational skills, attention to detail, and the ability to manage multiple projects. 
• Excellent communication skills, both verbal and written. 
• Ability to safely lift up to 50 pounds work comfortably on ladders up to 12 feet, and lifts over 26 feet. 
• Proficiency in soldering and cable terminations, including XLR, TRS, RCA, and more. 
• Familiarity with Microsoft Office and various web-based portals. 
• Ability to fit into tight spaces and quickly learn new computer programs. 

Compensation & Benefits 

• Medical and Dental Benefits
• 401K 
• Company Vehicle Use 

Additional Information 

• Candidates must be detailed, organized, and have a proven track record of reliability. 
• Committed to the company's Mission, Vision, and Values. 
• Ability to identify and handle various cable types and connectors. 
• Experience with basic and advanced hand tools is essential. 

About Mondo Media Solutions 

Mondo Media Solutions specializes in custom audiovisual, IT, and security systems for businesses, schools, and government. From boardrooms and auditoriums to digital signage, we deliver reliable, scalable technology solutions with a commitment to integrity and customer satisfaction. 

Position summary:

Install, maintain, and repair electrical systems, apparatus, and electrical equipment, wiring and fixtures, and electronic components of industrial machinery and equipment following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment.

Tasks:

• Install power supply wiring and conduit for newly installed machines and equipment following electrical code and blueprints, using hand tools and voltage tester.
• Install ground leads and connect power cables and wires to machines and equipment, following manuals, schematic diagrams, blueprints, using hand tools and test equipment.
• Diagnoses malfunctioning apparatus, such as transformers, motors, and fixtures using test equipment.
• Repair or replace faulty electric components, wiring, equipment, and fixtures, using hand tools and power tools.
• Test malfunctioning or broken equipment using test equipment, and discuss malfunction with other workers to diagnose malfunction.
• Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Place conduit, pipes or tubing, inside designated partitions, walls, structures or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
• Connect wires to circuit breakers, transformers, or other components.
• Install ground leads and connect power cables to equipment, such as motors.

Skills:

• Installation - Installing equipment, machines, wiring, or programs to meet specifications.
• Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
• Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Repairing - Repairing machines or systems using the needed tools.

Attributes:

• Follow the rules of safe conduct at all times.
• Demonstrate ability to effectively utilize materials/resources in cost-effective manner.
• Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
• Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
• Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
• Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
• Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
• Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

Knowledge Requirements:

• Post-Secondary Certificate desirable- awarded for training completed after high school. Minimum 5 years in craft, including helper and apprentice roles. Minimum 2 years as journeyman working in industrial environment
• READING: The employee must have the ability to read safety requirements, instructions in the correct use and maintenance of shop tools, be able to read and understand methods and procedures that are present on drawings, layout work, and just specifications.
• WRITING: Must have the ability to write simple reports with the correct format using spelling and grammar. (English
• SPEAKING: Must have the ability to speak using correct English with a well modulated voice.
• The minimum math ability usually associated with this classification is the ability to calculate surface areas, translate these figures into a bill of material which can be used to complete a specific job. Employees must be able to use variable and formulas which are normally found in most industry approved trade hand books. Also, employees must be familiar with the O.S.H.A. requirements for the type work that is being performed.

The employee must understand that the reporting system used for problems and information is as follows: 1) Crewleader, 2) Foreman, 3) General Foreman, and 4) Superintendent.

Physical Requirements:

• Positions require working in: climbing, bending, sitting, walking, kneeling, crawling, standing, lifting, pushing, and pulling.
• Good hand eye balance and the ability to distinguish colors are required in order to use the tools that are necessary to perform the required work.
• Employees must have vision which has good depth perception in order to judge distance and space relationships.
• The employee must be able to work in all types of weather conditions.
• The ability to work in elevated positions is a must.
• The employee must be able to work in confined spaces as well as wear the following safety equipment when need be: life vests, ear protection, rubber gloves, leather gloves, hard hat, slicker suit, acid suit, rubber gloves, full face breathing mask, wearing full safety harness, or wearing a face shield.
• The heavy work will require the employee to exert up to 100 pounds of force occasionally: The medium work will require the exerting of 50 pounds of frequently: The remainder of the work should require the exertion of 20 pounds of force to constantly move an object.

Other Requirements:

The employee must have a telephone. The employee is expected to work overtime in order to maintain the plant in a safe and productive state. The employee is expected to make call outs when such work is available and the employee’s services are needed.

The employee must have a valid Texas Driver’s License and have permission prior to operating any TIG vehicle. The requirements for operating a company vehicle are as follows: In the past three (3) years the employee can have had only 4 moving violations, no more than 2 chargeable accidents, and no D.W.I.

NOTICE: THIS JOB DESCRIPTION IN NO WAY STATES OR IMPLIES THAT THESE ARE THE ONLY DUTIES TO BE PREFORMED BY THIS EMPLOYEE. HE OR SHE WILL BE REQUIRED TO FOLLOW ANY OTHER INSTRUCTIONS AND TO PERFORM ANY OTHER DUTIES REQUESTED BY HIS OR HER SUPERVISOR.

Job Type: Full-time

Job Summary

Under the direction of the Vice President - Marketing, the Market Development Manager for Industrial Automation will lead strategic initiatives to expand HellermannTyton's presence in factory automation markets. This role focuses on identifying growth opportunities, developing go-to-market strategies, and driving the adoption of innovative cable management solutions for automated manufacturing environments. The position works independently and collaborates with multiple departments, including Sales, Marketing, Engineering, and Operations.

Essential Functions:

Market Strategy & Development

• 
  
  
• Define and execute industrial automation strategies, with emphasis on factory automation and cable management solutions.
  
  
• Conduct market assessments, identify high-growth segments, and develop actionable plans.
  
  
• Collaborate with Sales, Product Management, Engineering, and Marketing Communications to align strategies and resources.
  
  
• Partner with key commercial stakeholders to determine customer needs and lead the development of new products and marketing deliverables required to expand the company's market position.
  
  

Business Growth & Partnerships

• 
  
  
• Build relationships with OEMs, system integrators, and channel partners in the automation sectors.
  
  
• Develop strategic partnerships to penetrate new markets and expand share in existing ones.
  
  
• Participate in industry-related committees as applicable. Interpret code and industry changes and ensure HellermannTyton has the right specifications and products to enable new business.
  
  

Product Development Support

• 
  
  
• Work closely with Product Category Managers, Concept Team, and Engineering to set design, compliance, and performance specifications for new product developments in assigned markets.
  
  
• Provide market intelligence to guide product roadmap and ensure alignment with customer needs.
  
  

Sales Enablement & Execution

• 
  
  
• Support Key Account Managers and channel teams with technical expertise and market insights.
  
  
• Key contributor of new product launches, marketing deliverables, and deployment to the internal and external sales teams, channel, and key influencers in the market. Work closely with the marketing communications team to ensure deliverables further the company's brand equity and are created for maximum impact and results.
  
  
• Drive execution of cable management initiatives and other differentiated solutions for automation environments.
  
  

Performance Monitoring

• 
  
  
• Establish KPIs, track progress, and report quarterly on market penetration and revenue growth.
  
  
• Adjust strategies based on performance metrics and evolving market dynamics.
  
  
• Monitor and evaluate the competitive landscape in North America and globally. Develop deliverables and products to further differentiate HellermannTyton in the market.
  
  

Success in this role will require:

• 
  
  
• Ability to quickly and competently develop solutions-based differentiation models utilizing product, capability, corporate value, and market relationships.
  
  
• Ability to assess market needs and competition and develop a strategy that positions us as the market leader.
  
  
• History of creativity, innovation, inquisitiveness, and ethical behavior.
  
  
• Synthesize complex or diverse information. Collect and research data. Use intuition and experience to complement data.
  
  
• Proven experience in developing and executing business cases. Make sound decisions in new product and program development for profitable growth.
  
  
• Excellent skills in project organization, tracking, and communication of progress.
  
  

What You'll Bring

• 
  
  
• Bachelor's degree from a 4-year accredited college or university.
  
  
• 5+ years' experience in an industrial automation environment operating in a senior product management or market development role with a manufacturer.
  
  
• Strong project management, interpersonal, leadership, organizational and written/verbal communication skills required; ability to sell ideas and present strategies at an executive level.
  
  
• Excellent verbal and written skills. Proven ability to communicate value to different customer influencers - from the specifier to executive management
  
  
• Ability to travel up to 40% of the time.
  
  
• Must have a valid driver's license, with an acceptable driving record, along with adequate insurance
  
  

#LI-MS1 #LI-Hybrid

Overview
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

The Electrical Integrator L2 will provide technical support to program managers, project directors, task leads, and senior-level Electrical Integrators. The Electrical Integrator L2 will help with mid-level troubleshooting, repair, and maintenance of electrical cables, circuits, and assemblies.

This position will interact on a consistent basis with: faculty and staff project/task leaders, technical leads, contractors, and vendors

This position typically will advise and counsel: faculty and staff project/task leaders, technical leads, contractors, and vendors

This position will supervise: N/A

Job Duty 1 -
Support program managers, project directors, and task leads with mid-level electrical assembly work such as cable assembly fabrication, and electrical chassis fabrication and assembly

Job Duty 2 -
Help with mid-level testing and troubleshooting of circuits and systems

Job Duty 3 -
Provide intermediate levels of maintenance and repair of printed circuit boards and printed circuit board assemblies

Job Duty 4 -
Assist with kitting parts using a Bill of Materials or other online inventory tools; help provide data entry for online inventory tools

Job Duty 5 -
Support other work teams, as needed, with skills such as mechanical assembly, welding, metal work, drafting, parts inventory, and technical documentation

Job Duty 6 -
Provide guidance to more junior-level technicians

Job Duty 7 -
Perform other job-related duties as assigned

Educational Requirements
Technical Diploma, Associate's Degree, or two years college course work, or an equivalent combination of education and experience

Required Experience
Two to five years of job-related experience

Preferred Experience
IPC-610
IPC-620
J-STD-001
IPC-7711
IPC-7721

ABILITIES
Experience using crimping tools preferred

KNOWLEDGE
Familiarity with hand tools and a basic understanding of AC/DC circuits; a basic understanding of RF cables and build processes preferred

SKILLS
Basic skills in PCB assembly, electrical assembly wiring, and soldering preferred

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The University is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and University policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of race, ethnicity, ancestry, color, religion, sex (including pregnancy), sexual orientation, gender identity, gender expression, national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. This prohibition applies to faculty, staff, students, and all other members of the Georgia Tech community, including affiliates, invitees, and guests. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

More information on these policies can be found here: policymanual/section6/c2714 Board of Regents Policy Manual | University System of Georgia ( ).

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel.
This position does require the ability to obtain and maintain a security clearance.
This position is located in Atlanta, GA
Salary Job Grade A11
Recruiting Range: $ $23.99 to $32.62 based on experience

Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening.

A Senior Test Engineer job in Miramar, FL 33027 is currently available through Belcan at one of our key aerospace clients. This is a four‑month contract role with the potential to convert to a direct hire. To be considered for this role the candidate will need to have 3-5 years of relevant experience.

Description

The Test Design Engineer is responsible for creating and performing test automation activities consistent with the test lead and test development goals/objectives. This role requires knowledge/experience with automated test software, manufacturing test environment and the ability to interpret test requirements, implement requirement-based test methodologies and trouble shoot & debug test and product issues. Experience with FAA Part 145 in an MRO environment highly desired.

Job Duties:

Specific duties will include:

SW/HW debug, troubleshoot, upgrade and maintain product automated test equipment.

Requirements Analysis/Review for test-ability

Test procedure development, implementation, execution and failure root cause analysis.

Test planning and preparation.

Assess System performance against requirements

Develop code in Veristand, Teststand, LabVIEW to implement test GUIs, drivers and test requirements.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Perform sub-system testing from bench level CCA functional testing to system level burn in testing against an ATP/QTP.

Develop and refine system and board level test cases and procedures.

Trouble shoot subsystem and system level failures to root cause.

Design test fixtures & cables to enable testing.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Bench test CCAs and test electronic sub-assemblies and rack based test systems (instruments, cables and interfaces).

Trouble shoot subsystem and system level failures to root cause.

Gather, configure and use appropriate test equipment to perform task - Power supplies, DVM, Oscilloscope, electronic loads, custom cables, etc.

Interpret test requirements and electrical test results.

Read electrical schematics.

Test planning, preparation & execution

Required Qualifications:

3 to 5 years of experience

Strong interpersonal skills

Strong analytical skills

B.S. or M.S. in Electrical Engineering, Electrical Engineering Technology, or related discipline desired

Will consider equivalent years of relevant experience in lieu of a formal degree

Experience working with or developing Automated Test Equipment (ATE).

Experience in hardware and test equipment troubleshooting experience.

Knowledge of test automation (HIL) using National Instruments Labview, TestStand and Veristand

Can operate independently

Desired Skills:

Excellent verbal and written communication skills.

Experience working independently and in a collaborative environment

Ability to react to project adjustments and alterations promptly and efficiently

Ability to effectively prioritize and execute tasks in a high-pressure environment

Familiarity with electronic components and common electronic test equipment.

Experienced using lab test equipment, power supplies, DVM, Oscilloscope, electronic loads

Ability to interpret test requirements and electrical test results.

Ability to conduct detailed failure analysis and develop and implement root cause corrective actions.

Experience with GIT, Tortoise SVN, or equivalent software configuration management tools

Previous experience with CAN, UDS, RS232, RS422 & 1553 communication protocols.

Previous experience with programming languages such as C, C++ & C#.

Previous experience with Visual Studio.

Compensation:

This position is offering an salary rate of $52.88 - $62.50/hr, however, Belcan considers several factors when extending an offer, including but not limited to education, experience, geographic location, and discipline. Benefits offered may include health care, dental, vision, life insurance; 401(k); education assistance; paid time off including PTO, holidays, and any other paid leave required by law.

Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Crane Maintenance Mechanic, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.

As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes

• Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.
• Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.

• Determine and/or develop methods where procedures may not be available.
• Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.
• Operate, use and maintain overhead maintenance work platforms
• Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.
• Inspect and maintain building runway rails and expansion joints.
• Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.
• Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.
• Maintain logs, charts, and perform written and verbal tie-in records.
• Prepare reports and schedules as required.
• Work with and assist employees of other classifications as required.
• Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances

• 2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.

• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
• Able to lift up to 35 pounds.

Preferred Qualifications:

• Experience inspecting and maintaining building runway rails and expansion joints.
• Preference given to those with 2 years overhead crane experience.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: 33.32 – 61.01

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Is this you?

• You are driven to use your knowledge, skills, and work ethic to make a difference, saving both lives and property
• You have a passion for delivering top-notch customer service
• You thrive in a fast-paced work environment, always up for learning something new

If yes, then bring your talent and skills to F.E. Moran Fire Protection!

We have an exciting opportunity in Columbus, OH for an experienced Fire Alarm Technician.As our company continues to expand, we want you to grow and develop with us!

You Are:

• KNOWLEDGEABLE: High school diploma or equivalent; previous Fire Alarm Technician, Security Technician or other electronic systems experience; Understanding of NFPA standards, International Building and Fire Codes, Accessibility Codes, and state and locally adopted life safety codes
• TECHNICAL: Proficient in the application of Basic Electronic Theory and in the use of a digital multimeter; Ability to read and understand blueprints, schematics, and datasheets; Experience in troubleshooting, repair, and maintenance of fire alarm and other electronic systems preferred; Intermediate MS Office and Excel skills
• A SELF-STARTER: Learn quickly and use your resources to be successful in your role
• ANALYTICAL: Ability to read and understand technical information, analyze, think critically, and problem-solve
• FLEXIBLE: Travel to client sites regularly; Apply technical skills across multiple system types and disciplines, including fire alarm, intrusion, CCTV, access control, and structured cabling

What You’ll Do:

• SERVICE & INSTALL: Assemble control panels and build system programs; Install low voltage cabling and electronic system components; Troubleshoot systems to the component level to identify equipment necessary for repairs; Inspect and test fire alarm and other electronic systems
• KEEP TO CODE: Ensure that projects are compliant with local, state, federal, and district codes, regulations, and specifications; Complete required documentation accurately and in a timely fashion
• PUT SAFETY FIRST: Adhere to OSHA, customer, and safety protocols while on site; utilize safety best practices when lifting, moving, or pushing heavy materials and while climbing, balancing, and maneuvering on the job site
• COMMUNICATE: Provide thorough and timely information to clients; Communicate status of work orders to supervisors and other office staff
• COLLABORATE: Coordinate with project Foreman and other trades to complete projects and work orders efficiently; Maintain positive working relationships with field and office staff

What We Offer:

• TOTAL REWARDS: Competitive salary and benefits package, including medical, dental, and vision; life and disability insurance; paid time off; and 401(k) retirement savings plan with discretionary company match
• DEVELOPMENT: Opportunities to learn, develop, and enhance your skills and abilities
• WORK ENVIRONMENT: Professional, engaging, supportive, and rewarding
• TEAM: Play an integral role in a knowledgeable and high achieving group of professionals

Who We Are:

The F.E. Moran Group of Companies is comprised of seven specialized businesses offering a full spectrum of HVAC, Mechanical Services, Fire Protection, Special Hazard Systems, Plumbing, Refrigeration, and Industrial Piping Services across virtually every market. We are a single-source contractor working seamlessly to consolidate resources and deliver outstanding construction and service solutions, regardless of size, scope, complexity, or location…We save lives, protect property, and create healthy environments.

Interested? Apply Now!

Candidates must be at least 21 years of age to be eligible for positions that require participation in the company’s fleet program. This is a requirement for roles involving the operation of company vehicles.

At F.E. Moran Group of Companies, we are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. If you have a specific need that requires accommodation, please advise a member of the Talent Acquisition team by contacting us at

Who We Are

Our purpose at CloudHQ is to provide flexible, efficient, and resilient data center solutions to businesses of all sizes. Our growing organization was founded by the pioneer of data center REITs. CloudHQ has state-of-the-art data center sites located in two Northern Virginia locations, as well as London, Frankfurt, Paris, Milan, and Sao Paulo, and we anticipate exponential growth over the next several years both in the US and abroad.

What The Role Entails

We are seeking an authoritative and highly technical Senior Manager to lead the design, coordination, and delivery of telecommunications infrastructure across our global hyperscale data center portfolio. Focusing primarily on the Americas (AMERs) and Latin America (LATAM) with global oversight, this role transitions beyond individual engineering to full portfolio and personnel management. The ideal candidate will direct regional engineering staff, govern vendor relationships, enforce strict project execution sequencing, and ensure world-class delivery of our telecom strategy.

What You Will Get To Do

Team Leadership

· Directly manage, develop, and allocate resources for regional telecom engineering and development staff.

· Enforce strict project sequencing, ensuring internal scope and lease alignment is locked prior to external contractor pricing or legal counsel engagement.

· Manage departmental OpEx/CapEx budgets and oversee the external vendor bidding, negotiation, and award process.

· Serve as the primary technical authority and escalation point between CloudHQ, external design partners, and Tier 1 carriers.

· Mentor and provide technical guidance to junior engineers and regional team members, ensuring strict adherence to corporate protocols.

Technical Architecture & Design

· Oversee and approve all telecommunications design packages across AMER, LATAM, EMEA, and APAC.

· Architect OSP, ISP, ICN, and interconnect strategies at both campus and metro scales.

· Govern diverse fiber routing strategies and carrier-neutral MMR design standards.

· Direct high-density structured cabling architecture and long-term scalability planning.

· Coordinate Layer 2 and Layer 3 architecture, IP addressing schemes, and VLAN segmentation with network engineering teams.

· Evaluate designs against N, N+1, 2N, and 2N+1 redundancy models and fault-tolerant principles.

· Ensure cross-regional compliance with TIA-942, BICSI, IEEE, and applicable local codes and standards.

Project Execution & Delivery

· Manage and track multiple hyperscale projects simultaneously, holding internal teams and external vendors accountable to schedules, budgets, and deliverables.

· Identify risks, gaps, and design conflicts early, actively driving effective technical and commercial solutions.

· Develop, maintain, and govern telecom design standards, specifications, and best practices across the global portfolio.

· Review, coordinate, and formally approve telecom drawing markups and design packages (utilizing Bluebeam, Visio, and CAD tools).

· Lead telecom infrastructure audits and long-term capacity planning initiatives.

· Coordinate seamlessly with cross-functional executive teams including IT, network engineering, construction, and facilities.

Please Note: This specific opportunity requires US citizenship.

What You Bring To The Role

· A Bachelor’s degree in Telecommunications, Electrical Engineering, or a related field (or equivalent experience).

· A minimum of ten (10) years of progressive experience in telecommunications or network infrastructure engineering, including direct personnel and team management experience.

· 5+ years of mission-critical or hyperscale data center experience.

· Demonstrated experience leading multi-region or global telecom deployments and managing distributed regional staff.

· Executive presence with the ability to lead technical meetings, negotiate with external design partners, and enforce strict project governance.

· Highly organized with strong project management, documentation, and budget tracking skills.

· Strong proficiency in engineering review software (Bluebeam, Microsoft Visio, CAD).

· Ability to manage multiple priorities in a fast-paced, global environment.

Our Ideal Candidate Will Also Possess

· Experience working on international projects across the US, LATAM, EMEA, and APAC.

· Deep familiarity with data center telecom infrastructure, structured cabling systems, fiber routing, and carrier interconnection strategies.

· Strong knowledge of relevant industry standards including TIA-942, BICSI, IEEE, and regional codes.

· Professional certifications such as BICSI RCDD, PMP (Project Management Professional), and CCNP are strongly preferred.

What We Offer

CloudHQ’s people and culture are the most enriching aspects that make us a great place to work. We are strengthened by industry experts who bring extensive knowledge, skill, and experience; leaders who bring vision, innovation and commitment to our people; and an expanding team of individuals who believe in that vision, and bring their best to support their customers and team.

Our employees enjoy competitive compensation and rewarding incentives, comprehensive benefits (medical, dental, vision, life insurance, disability), 401(k) with match, 12 paid holidays, generous PTO, development opportunities, and the ability to closely impact and contribute to the growth of an exceptional organization.

Equal Employment Opportunity

CloudHQ is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, age, national origin, disability, sexual orientation, gender identity or expression, marital status, genetic information, protected veteran status, or other legally protected status.

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Avionics Harness Technician at Reliable Robotics, you will be a part of the Production organization. This is a small but growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You'll play a critical role in the build, operation, integration, test, diagnostics, inspection, and maintenance of highly reliable avionics systems, such as wiring harnesses and electromechanical hardware. You'll also help with the installation of those systems onto aircraft. Your work will support various product development phases such as prototype, research and development, aircraft certification, and recurring production. This is a fantastic opportunity to serve as the last line of defense for ensuring that our safety-critical systems are reliable and produced to the intended engineering requirements.

Responsibilities

• Build, operate, integrate, test, diagnose, inspect, and maintain highly reliable systems, including wire harnesses, cable assemblies, avionics assemblies, and circuit card assemblies

• Read, interpret, and work from drawings, controlled documentation, and processes such as drawings, layouts, assembly procedures/work instructions, schematics, engineering drawings, and master parts lists

• Develop and improve manufacturing and installation instructions

• Assure product and process quality by testing finished-product and process capabilities

• Resolve product non-conformances and collaborate with the quality team to implement corrective actions

• Record work performed in a clear, precise, and complete manner

• Assist with the development of production and improvement processes

Basic Success Criteria

• 8+ years of professional experience building/fabricating wire harnesses or cable assemblies, or other testing, integration, or mechanical assembly experience

• 5+ years of hands-on experience reviewing technical designs and working from drawings, schematics, layouts, assembly/procedures, master parts lists, and other controlled documentation

• One or more of the following certifications: IPC-A-610, IPC-A-620, IPC J-STD-001, NASA-STD-8739.4

• Ability to proficiently use a PC/Mac, Google Suite, manufacturing execution systems, JIRA, or equivalent tools

• Ability to lift 25-pound boxes to a height of 3-4 feet, with or without reasonable accommodation

Preferred Criteria

• Experience working in an electro-mechanical manufacturing company, a precision manufacturing company, or a high-volume manufacturing company

• Electro-mechanical assembly and prototype development experience

• Experience setting up and running tests and experiment

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel up to 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $125K - $145K

Overview
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

The Electrical Integrator L1 will provide technical support to program managers, project directors, task leads, and senior-level Electrical Integrators. The Electrical Integrator L1 will help with basic troubleshooting, repair, and maintenance of electrical cables, circuits, and assemblies.

This position will interact on a consistent basis with: faculty and staff project/task leaders, technical leads, contractors, and vendors

This position typically will advise and counsel: faculty and staff project/task leaders, technical leads, contractors, and vendors

This position will supervise: N/A

Job Duty 1 -
Support program managers, project directors, and task leads with basic electrical assembly work such as cable assembly fabrication, and electrical chassis fabrication and assembly

Job Duty 2 -
Assist with basic testing and troubleshooting of circuits and systems

Job Duty 3 -
Assist with kitting parts using a Bill of Materials or other online inventory tools

Job Duty 4 -
Support other work teams, as needed, with skills such as mechanical assembly, welding, metal work, drafting, parts inventory, and technical documentation

Job Duty 5 -
Perform other job-related duties as assigned

Educational Requirements
Technical Diploma, Associate's Degree, or two years college course work, or an equivalent combination of education and experience

Required Experience
Up to two years of job-related experience

Preferred Experience
IPC-610
IPC-620
J-STD-001
IPC-7711
IPC-7721

Experience with inventory control and management of electrical and mechanical components.

ABILITIES
Experience using crimping tools preferred

KNOWLEDGE
Basic understanding of AC/DC circuits, and familiarity with basic hand tools

SKILLS
Basic skills in PCB assembly, electrical assembly wiring, and soldering preferred

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia (USG) and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individuals race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel.
This position does not require security clearance.
This position is located in Atlanta, GA
Salary Job Grade S4
Recruiting Range: $20.01 to $27.22

Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening.

Atkore is forging a future where all Atkore brands, suppliers, employees, customers, partners and communities are building better together - a future focused on serving the customer and powering and protecting the world.

Atkore is a leading manufacturer and distributor of electrical, mechanical, and safety infrastructure solutions to power and protect the world. With approximately 3,900 employees and 65 manufacturing and distribution facilities worldwide, Atkore manufactures electrical conduit, cable management systems, armored cable, metal framing, and security products and solutions and is a recent recipient of a Great Place to Work certification. Atkore's commitment to quality, delivery and value helps customers realize their vision. Atkore forges relationships and shapes the future with breakthrough results, enhanced technology, and innovative product offerings.

We are currently searching for a Electrician to be based out of Thomasville, GA. Reporting to the Maintenance Manager, this person will be responsible for performing skilled preventative and corrective electrical maintenance to equipment and associated building including interior and exterior lighting and wiring system

The ideal candidate will have a high school diploma or equivalent and 3 years electrical maintenance experience in an industrial/manufacturing environment. Experience in lean manufacturing or business system based company is a plus.

Additional Responsibilities include, but are not limited to:

• 
  
• Test, locate, and repair trouble in electrical circuits and equipment; perform electronic equipment repair and troubleshooting; repair and replace broken or defective parts; repair electrical motors, parts, wiring and other electrical devices.
  
• Use knowledge of principles, methods and equipment in the installation, maintenance and repair of electrical systems and electronic equipment.
  
• Read and interpret drawings, specifications and manuals.
  
• Work within team environment with minimum supervision.
  
• Exercise judgment and initiative within established guidelines.
  
• Provide assistance to maintenance personnel
  
• Perform other duties as assigned by supervisor
  

Qualifications include:

• 
  
• High School diploma or equivalent
  
• 3 years electrical maintenance experience in an industrial/ manufacturing environment.
  
• Must have strong Mechanical and/or Electrical skill set
  
• Knowledge of relevant state and federal regulations, codes and ordinances pertaining to the work safety practices, safe work methods and safety regulations pertaining to the work.
  
• Understand and effectively carry out oral and written instructions.
  
• Experience and knowledge of Lean Daily Management principles preferred
  
• Computer skills in Excel, Word, Power Point and MS Project preferred
  
• All associates must embrace and foster and environment that supports our core values of Integrity, Respect, Excellence, Teamwork and Accountability.
  

Our Culture Drives Value

Atkore's culture is created from the disciplined use of the Atkore Business System (ABS), which is a critical part of our mission and a foundational system based on excellence in People, Strategy, and Processes, tied together with Lean Daily Management (LDM) to manage and sustain the business we have today, and Strategy Deployment Process (SDP) to create the business we aspire to become.

Having the right talent in the right roles enables successful ABS execution, improves our customer's experience, and delivers breakthrough results. Said another way, that's how we win!

Great Leaders Drive Value

Atkore is committed to creating an engaged and aligned workplace that helps drive an accountable and performance-based culture. Our team possesses a willingness to strive for breakthrough results, stays focused on being standout leaders, and fully supports decisions of the Company after robust debate. We consistently live the Atkore mission, learn our strategic priorities and link behaviors to those priorities, all in a way that's consistent with our core values. Together, we build stronger leaders and improve customer satisfaction which positively increases the overall value of the enterprise.

Atkore Delivers Value to You

By joining Atkore, you can expect to receive a competitive salary in addition to a comprehensive benefits package including medical, dental, vision, 401(k) with company match, a generous maternity/paternity leave, flexible spending accounts, tuition reimbursement, as well as life, accident and disability insurance. In addition, Atkore offers wellness programs and employee assistance resources to help employees achieve a healthy work-life balance.

Our dedicated employees are recognized for their commitment to our customers and making our company better than it was the day before.

Atkore is an Equal Opportunity Employer and does not discriminate because of age, color, disability, ethnicity, marital or family status, national origin, race, religion, sex, sexual orientation, gender identity, military veteran status, or any other characteristic protected by law.

Atkore is a diverse company that believes its employees are the foundation for investing in its future, through the understanding that awareness and acceptance of our individual difference enhance inclusion and promote engagement and alignment. Diversity and inclusion are keys to growing our business and providing a work environment that fosters contributions by all employees.

Join our team and align yourself with an industry leader!

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space.

Our missions have direct impact to global security, like missile warning and Earth observation.

Our team is curious, bold and innovative.

We take risks, innovate and explore new techniques and technologies.

We influence change because we challenge the status quo.

And when we watch our satellites launch, we know each one of us made it happen.

As a Manufacturing Engineer
- Harness, you will be responsible for developing, qualifying, and implementing manufacturing processes and procedures to build and test flight and non-flight cable harness assemblies.

You will be the manufacturing liaison for engineering and be responsible for reviewing harnessing drawings, writing work instructions, supporting production, and working with engineering to optimize manufacturing.

This role requires the ability to work second shift.

This position's internal job code is Manufacturing Engineer.

Our team is currently hiring for levels 3-4.

Position Responsibilities: Act as the connector between the design engineering and manufacturing organizations Identify improvement opportunities and execute initiatives to ensure product quality, reduce lead time, decrease labor hours, maintain safe operations, etc.

Troubleshoot production issues, identify root causes, and drive implementation of corrective actions for non-conformances Create process plans, standard operating procedures, Bill of Materials (BOM), and rework instructions for all manufacturing items within your ownership Conduct reviews of drawings, standards, and other releasable documents Collaborate with design engineers to ensure manufacturability of wire harnesses and provide feedback on design improvements Work within cross-functional teams including quality engineering, manufacturing operations, and supply chain to bring products from new product introduction (NPI) to full-scale production Basic Qualifications (Required Skills/Experience): Bachelor's degree in an engineering discipline 3 years working in a harness/cable assembly environment Familiarity with IPC-WHMA-A-620, NASA-STD-8739.4, and IPC J-STD-001 Technical problem-solving skills, including root cause analysis complete with sound engineering based corrective actions Experience with MES, MRP, and ERP systems Excellent written, verbal communication, and interpersonal skills Preferred Qualifications (Desired Skills/Experience): 5 years of experience in a harness manufacturing and design (electrical & integration) environment Experience in a high-rate manufacturing environment Strong understanding of electrical schematics, wiring diagrams, and harness acceptance testing Writing test scripts, experience with Cirris CH2 and Weetech testers Competency using 3D CAD modeling and PDM software (Solidworks, etc) Exposure to harness design software (Capital, Zuken, etc) Familiarity with lean manufacturing principles and Six Sigma methodologies Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process Drug Free Workplace: Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Total Rewards: At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: Level 3: $96,050
- $141,250 Level 4: $117,300
- $172,500 Millennium is DDTC-registered, ITAR-compliant Company.

This position is located at a facility that requires special access.

Applicants MUST be U.S.

citizens and eligible for a security clearance.

Additionally, applicants must be willing to apply for and maintain a security clearance.

We encourage all interested candidates to apply for any open position for which they feel they are qualified.

Applications for this position will be accepted until May.

31, 2026 Export Control Requirements: This position must meet U.S.

export control compliance requirements.

To meet U.S.

export control compliance requirements, a "U.S.

Person" as defined by 22 C.F.R.

§120.62 is required.

"U.S.

Person" includes U.S.

Citizen, U.S.

National, lawful permanent resident, refugee, or asylee.

Export Control Details: US based job, US Person required Relocation Relocation assistance is not a negotiable benefit for this position.

Security Clearance This position requires the ability to obtain a U.S.

Security Clearance for which the U.S.

Government requires U.S.

Citizenship.

An interim and/or final U.S.

Top Secret Clearance Post-Start is required.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for 2nd shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.aa415a4b-8b21-40fc-a65c-70d2b25ca29a

Job Title: Electrical Designer

Location: Peoria, IL

Employment Type: Long term

Job Summary

We are seeking an experienced Electrical Designer to support the design and development of off-highway vehicle electrical systems. The ideal candidate will have strong hands-on experience in electrical design and documentation, including 2D/3D drawings, harness routing, enclosure modeling, and BOM creation, with solid exposure to off-highway or heavy equipment applications. This role requires close collaboration with cross-functional and offshore teams to deliver accurate, manufacturable electrical designs.

Key Responsibilities

• Develop detailed electrical design drawings, plans, and diagrams based on design specifications
• Create and maintain 3D models for:
• Enclosure assemblies and installations
• Electrical harnesses, cable routing, and electrical fitment layouts
• Translate sketches, specifications, and verbal instructions into accurate engineering drawings, including:
• Flattened production drawings
• 2D to 3D associative models
• Ensure designs comply with applicable engineering standards, codes, and regulations
• Collaborate with operations and manufacturing teams to identify drawing-related issues
• Work closely with design engineers to clarify design intent and resolve design issues
• Modify and revise drawings based on design changes and engineering feedback
• Create and maintain Bills of Materials (BOMs) and supporting manufacturing documentation
• Coordinate with multi-disciplinary engineering teams to confirm component locations and develop models for:
• Electrical brackets
• Cable trays
• Enclosures and mounting structures
• Maintain accurate engineering documentation, drawing control, and version management
• Work effectively with offshore engineering teams to support design execution
• Demonstrate strong communication and collaboration skills

Required Skills & Experience

• 5–7 years of experience as an Electrical Designer in off-highway or heavy equipment vehicle design
• Strong experience creating electrical drawings, harness layouts, and installation designs
• Proficiency in:
• SolidWorks
• AutoCAD Electrical
• Experience with 2D/3D drawing association and flattened production drawings
• Knowledge of engineering standards and best practices for electrical design
• Experience creating and maintaining BOMs and manufacturing documentation
• Ability to work collaboratively with cross-functional and offshore teams

Preferred Qualifications

• Experience working on construction, mining, or off-highway equipment
• Familiarity with electrical fitment of brackets, trays, and enclosures
• Bachelor’s or Master’s degree in Electrical, Mechanical, or related Engineering discipline

Must haves:

• Electrical apprenticeship or formal training in electrical installation techniques.
• Demonstrated ability to read and interpret drawings.
• Possesses working knowledge of local codes as it applies to controls.
• Experienced in scope determination of installation materials. Able to work independently.
• Four years’ experience directly with controls installations.

Day to day:

Under general supervision, performs installation and checkout on a variety of systems utilizing codes, company procedures, engineering drawings and personal analysis. Works with electrical contractors as required. Develops a positive interface with the customer to ensure confidence and satisfaction with the system installation.

• Installs raceways, cables and wiring to meet local or national codes, standards and customer system requirements. Lays out electrical controls installation to provide lowest total installed cost.
• Mounts and terminates controls equipment as needed.
• May assist sales with electrical estimates, including walking retrofit projects.
• Determines and validates final termination points to equipment interfaced with the installed system (i.e. chillers, boilers, roof top units, etc.).
• Checks out wiring and terminations of field-installed equipment with test instruments as needed (i.e. volt meters, hand held testers, etc.).
• Keeps management informed of job needs, progress and issues.
• Completes paperwork, including but not limited to time sheets, expense reports, and on-site documentation. Provides feedback to Engineering on changes and keeps as-built drawings current.
• Resolve job site conflicts regarding installation issues or escalates concerns to management as required.
• Communicates with the customer as necessary upon arrival and before leaving the work site.
• Adheres to safety programs and policies.
• Performs other related duties as assigned.