Cable Remote Control Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

A leader in technology and innovation, Southwire Company, LLC is one of North America’s largest wire and cable producers. Southwire and its subsidiaries manufacture building wire and cable, utility products, metal-clad cable, portable and electronic cord products, OEM wire products and engineered products.

Industrial Maintenance Controls Technician

Location: Pleasant Prairie, WI

Compensation: $36 - $39 hour

Shift: Monday – Friday ~ days

Pension plan!!

As an Industrial Maintenance Controls Technician, you will support our manufacturing operations by providing a full range of electronic equipment maintenance with focus on reliability. Ensure sustainable operation of machinery and equipment by completing preventive maintenance requirements on motors, conveyor systems, and other production machinery. The Industrial Maintenance Controls Technician will also be a key member of process improvement and problem-solving teams.

Qualifications and Experience Requirements

• Associates degree or higher required
• PLC experience is required
• Strong Mechanical and Electrical background (up to 480v)
• Hydraulic and pneumatic experience
• Ability to interpret technical drawings, schematics and OEM manuals
• 5 years of industrial manufacturing maintenance experience
• Possesses strong computer skills (Word, Excel, PowerPoint, Outlook, CMMS, etc.)

Industrial Maintenance Controls Technician Job Description

• Troubleshoot equipment malfunctions using logical and systematic methodologies.
• Routine maintenance including but not limited to field fault analysis, calibration of instrumentation using proper test equipment, component replacement, alignment and calibration to specification.
• Troubleshoot and repair various equipment to include electronic, digital equipment and AC/DC motors & controls.
• Fault analysis of hard-wired relay logic, motor control circuits, motor power circuits (single & 3 phase) and common utility/lighting circuits.
• Access and use PLC logic programming to troubleshoot production equipment.
• Replacement of identified failed parts or components.
• Adjust equipment to bring it into operational specifications.
• Recommend process or procedure changes based on observed equipment behavior.
• Testing of electrical systems and continuity of circuits in electrical wiring, using testing devices such as ohmmeters, and voltmeters to ensure proper operation and safety of system.
• Install, examine, replace or repair electrical wiring, receptacles, switch boxes, conduits, lighting fixtures and other electrical components.
• Maintain current and accurate maintenance data to establish historical records and future maintenance requirements.

Benefits We Offer:

• 401k with Matching & Pension Plan (Eligible for Pension after 1,000 Hours Worked)
• Family and Individual Insurance Packages (Health, Life, Dental, and Vision)
• Paid Time Off & Paid Holidays
• Long & Short-Term Disability
• Supplemental Insurance Plans
• Employee Assistance Program
• Employee Referral Program
• Tuition Reimbursement Programs
• Advancement & Professional Growth opportunities
• Parental Leave
• & More

Southwire is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.

Weeks Group, LLC is a leading construction firm specializing in the development of advanced data center facilities. With a strong commitment to innovation, quality, and client satisfaction, we deliver cutting-edge solutions that address the dynamic needs of the data center industry. As we continue to expand, we are seeking a skilled and experienced Data Center Construction QAQC Manager to join our dream team. We are not headhunters. We don't just put butts in seats. We are a dream team of experts in the industry to thrive from solving problems and getting things done!

Weeks Group's Values:

We Answer the Call

Integrity- Honesty-Trust- Nimbleness

We Don’t Take No for an Answer

Persistence- Determination- Accountable

We Solve Problems

We Work Hard and Reward Well

Within Challenging, Intense Projects

We Expect the Best from Each Other

Teamwork- Communication

We BTFM

Innovative- Disdain for Mediocrity

If you don't have data center experience or don't align with our values, no need to apply.

Employment Type: Full-time-Traveling position option

Project Type: Hyperscale / Mission Critical Data Centers – Brownfield (live campus / retrofit / expansion)

Reports To: Project Director / Director of Construction Operations

Role Summary

We’re hiring an On-Site QA/QC Manager to lead the quality program on brownfield hyperscale data center construction—where safety, uptime, and precision matter as much as speed. You’ll own electrical QA/QC planning and execution, drive rigorous documentation, and ensure installations meet strict client standards, contract requirements, and code while working in/around live critical environments. This role supports readiness for energization, commissioning, and IST with strong change control and zero-surprise turnover.

What You’ll Do

• Own and maintain the Project Quality Plan (PQP) tailored for brownfield constraints (phasing, outages, access controls, change control).
• Build and manage electrical Inspection & Test Plans (ITPs), checklists, and hold/witness points—by system, room, and phase.
• Lead daily QA/QC field execution and verification against IFC drawings, approved submittals, vendor IOMs, RFIs, and method statements.
• Drive quality for the electrical critical path, including (as applicable):
• MV/LV distribution: switchgear, transformers, breakers, relays, terminations
• UPS/battery systems: installation verification, clearances, labeling, startup readiness
• Generators/paralleling gear: interface readiness, documentation capture, punch closure
• Busway/PDUs/RPPs: supports, alignment, tap boxes, labeling, grounding/bonding
• Cable tray/conduit: routing, supports, firestopping, separation, workmanship standards
• Grounding & bonding: integrity verification and as-built accuracy
• Controls/EPMS/BMS electrical interfaces: device placement, labeling, point-to-point readiness (as assigned)
• Enforce brownfield-specific quality disciplines:
• Verify phasing plans and temporary power installs meet requirements
• Maintain as-built accuracy in real time due to live site impacts and field changes
• Coordinate quality gates tied to shutdown windows, cutovers, and turnover milestones
• Manage deficiency systems: NCRs, punch lists, rework prevention, corrective/preventive action (CAPA), re-inspections, and verified closeout.
• Partner tightly with Operations, Controls, Commissioning, and Safety to ensure quality supports uptime protection and controlled energization.
• Own electrical turnover packages: inspection reports, test results, redlines/as-builts, O&Ms, training logs, vendor startup documentation, commissioning support documentation.
• Provide weekly reporting: trends, repeat issues, risk register inputs, and 2–6 week quality look-ahead tied to phasing and outage schedules.

Qualifications

• 7+ years QA/QC experience on mission critical construction with strong electrical focus; brownfield/live siteexperience strongly preferred.
• Proven success running PQP/ITP programs, NCR/punch systems, and turnover documentation on fast-track or phased retrofits.
• Strong ability to interpret one-lines, schematics, control wiring diagrams, specs, and vendor documentation.
• Working knowledge of NEC/NFPA 70 and typical hyperscale QA requirements (labeling standards, documentation rigor, readiness gates).
• Highly organized, strong communicator, and able to coordinate across multiple trades, vendors, and stakeholders in a controlled environment.

Preferred

• Experience supporting cutovers, shutdown windows, energization planning, commissioning readiness, and IST
• Familiarity with NFPA 70E-related interfaces and verification of torque/labeling/test documentation programs
• Certifications: CQM-C, ASQ (CQA/CQE), OSHA 30
• Tools: Procore, ACC/BIM 360, Bluebeam, PlanGrid

What Success Looks Like

• Zero “surprise” quality issues during shutdown windows and cutovers
• Electrical systems pass startup/commissioning on first attempt
• NCR/punch stays controlled and closes quickly ahead of milestones
• Turnover packages are complete, accurate, and accepted without rework

Benefits

• Competitive compensation + bonus potential
• Health/dental/vision, 401(k), PTO
• Per diem/vehicle allowance (if applicable)
• Growth path within hyperscale mission critical delivery

Job Title: I&C Design Engineer

Employment Type: Direct Hire

Location: Dallas, TX – (onsite 4 days/week, off every other Friday)

Salary: $110-130k

Benefits:

• Medical, Dental, Vision
• Life Insurance
• 401k
• PTO
• Holiday

Summary:

Akkodis is seeking an I&C Design Engineer for a DIRECT HIRE position in the Dallas, TX area. The desired candidate will have 5+ years of previous experience design for electrical instrument and controls. The I&C Engineer will be responsible for the design/development of industrial control systems including SCADA, PLC, and HMI systems. This is an excellent opportunity to support an exciting company in the electrical engineering industry.

***Remote 1 day/week, and off every other Friday***

Responsibilities:

• Site assessment and determination of needed instrumentation/SCADA upgrades
• Review of existing project documents – P&ID, system architecture, electrical drawings
• Coordination with clients on specific needs
• Document findings – Write assessment or report of existing conditions and recommendations
• Design/development of project drawings, including P&ID, system architecture, loop diagrams, installation details
• Create project specifications, including instrumentation, networking, control narrative strategies, software and hardware requirements for SCADA, PLC, and HMI systems
• Quality Control/Quality Assurance of project documents
• Attend/Conduct project meetings with client
• Review and comment on project submittals
• Coordination with Electrical Engineering Department

Required Skills:

• Bachelors Degree in an Engineering related field is required.
• A minimum of 5 years of relevant I&C experience is required.
• MUST HAVE PE or EIT and sitting for PE soon.
• Must have experience designing SCADA, PLC, and HMI systems.
• Strong background in AutoCAD is preferred.
• Registered Professional Engineer (PE) or Engineer-in-Training (EIT) in Texas is required.
• Experienced in the design of construction documents.
• Write Technical Memoranda based on site assessment.
• Drawing/PDF markups.
• Design relay schematics (motor control).
• PLC and SCADA HMI development and creation of PLC I/O lists
• Wide Area Network (WAN) design, including radio and cellular communications
• Fiber optic cable specification
• Control panel design
• VFD design/interface
• Physical and cybersecurity assessment and design preferred.
• A proactive, solution-oriented approach to challenges, with a focus on team success.
• Strong ability to foster and maintain professional, cross-functional relationships.

If you are interested in this I&C Engineer job, then please click apply through Akkodis.

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :  

• This position is for a variety of shifts   

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :  

• This position is for a variety of shifts   

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Summary

Reporting to the Installation Manager the HVAC/R Installation Technician is responsible for install ventilation, air conditioning, refrigeration systems and equipment; inspect and perform tests on systems and equipment at start-up to assure proper functioning. This position has constant contact with the Project Managers and Sales Engineers to receive installation detail and communicate project requirements and results. This position has frequent contact with customers, requiring reasonable tact and strong verbal/written communication skills.

Responsibilities

Customer Service

• Always present a professional positive and helpful attitude when interacting with customers and co-workers.
• Exhibit an understanding of Human Relations and functions as a “team player”.
• Observe additional maintenance needs requiring attention and report to the appropriate people.

Work Condition and Paperwork

• Organize all work detail (work performed, service recommendations, etc.) and complete an accurate work ticket for billing and payroll purposes. Submit all paperwork to the office each Monday before 10:00 AM or at end of each month is required.
• Obtain, record on work ticket and communicate to vendor an appropriate purchase order number when purchasing job-related parts and supplies.

Essential Functions

• This is a physically demanding job involving heavy physical labor, often in adverse conditions and uncomfortable positions.
• Loads van with equipment and tools and drives van to and from job sites.
• Moves equipment (such as furnaces, compressors, blowers, heat pumps, heat exchangers, duct work, pipes and cables, controls, etc.), supplies and tools (hand and power) to designated areas of job sites.
• Perform associated plumbing and electrical work including making terminal connections.
• Must be able to perform all job activities at heights, working off ladders, scaffolds, roofs, platforms, etc.

Job Qualifications

• Must have valid Michigan drivers’ licenses, good driving record (our insurance must accept you)
• High school diploma or GED preferred
• Read and write English
• Write legibly
• Read a tape measure, perform basic math skills: (Add, Subtract, Fractions, Calculate sales tax)
• Paperwork filled out properly daily.
• Follow verbal and written instructions.
• Follow all safety rules and procedures.
• Be able to wear all P.P.D’s when applicable (steel toe boots, gloves, safety glasses, hard hat, etc.)
• Must be able to wear respirator.
• Lift, climb, bend, and kneel to complete assigned tasks.
• Tolerate working at heights off a ladder or scaffold, on roofs, aerial lifts, etc.
• Perform heavy physical labor during adverse weather conditions.
• Work in confined spaces, exposed to fumes, chemicals, grease, acids, oil and in the vicinity of noise and vibration with proper P.P.D’s.
• Maintain cooperative and effective working relationship with others.
• Be available to work any time of the day to take care of your customer. (Before 8:00 am and after 5:00 pm during the week, any time weekends and holidays)
• 4 hours safety training required annually
• Must have refrigerant transition and recovery certification card (levels 2-3)
• Continuing education is expected.

Physical Requirements

• Lift 50 lbs. frequently, 100 lbs. occasionally, and 100+ lbs. with assistance
• Climbing (ladders, stairs, etc) (frequently with tools or equipment in hand)
• Bending, stooping, twisting, and squatting
• Extended periods of walking
• Regular exposure to weather conditions
• Operating a motor vehicle, Hi-low, forklifts, etc.
• Owning and operating power or hand tools-from floor to above head (drilling often over your head and/or awkward positions)
• Exposure to potentially harmful chemicals or materials with proper P.P.D’s

Non-essential duties and responsibilities

• Performs other duties as assigned by management

Industrial Outside Sales Representative

Mid America Wire & Cable Tulsa, OK (Territory-Based | Travel Required)

About Mid America Wire & Cable

Mid America Wire & Cable is an OEM & Industrial-focused electrical supplier headquartered in Tulsa, Oklahoma. We support manufacturers across industries including industrial automation, oil & gas, data centers, and equipment manufacturing with hookup wire, thermocouple wire, terminals, loom, cable management products, and other production materials.

We are the only locally based OEM & Industrial-designated electrical supplier in our market and are experiencing strong year-over-year growth. Our mission is simple: protect production, shorten lead times, and deliver service that large national distributors can’t match.

Position Overview

The Industrial Outside Sales Representative is responsible for developing new business and expanding existing Industrial accounts within an assigned territory. This role focuses on building long-term partnerships with manufacturers by identifying production pain points, improving supply chain reliability, and increasing share of wallet.

This is a growth-driven, relationship-based sales role — not transactional counter sales.

Key Responsibilities

• Prospect and develop new accounts within target industries

• Maintain and grow existing customer relationships

• Identify production bottlenecks, long lead-time issues, and service gaps with current suppliers

• Present Mid America Wire & Cable as a strategic supply partner

• Conduct in-person customer visits (plant walkthroughs, production meetings, engineering discussions)

• Generate and follow up on quotes in a timely manner

• Negotiate pricing within margin guidelines

• Collaborate with inside sales and operations to ensure smooth order fulfillment

• Maintain accurate CRM activity and pipeline tracking

• Achieve and exceed monthly and annual gross profit goals

Target Industries

• OEM Manufacturers

• Oil & Gas Equipment Manufacturers

• Industrial Automation & Controls

• Data Center Infrastructure

• Panel Builders

• Machinery & Equipment Builders

Qualifications

• 5+ years of outside B2B sales experience (industrial or electrical preferred)

• Strong understanding of manufacturing environments

• Ability to sell value over price

• Self-motivated with strong territory management skills

• Comfortable with cold outreach and business development

• Strong communication and relationship-building skills

• Valid driver’s license and ability to travel within territory

Preferred:

• Electrical distribution or wire & cable experience

• Existing relationships with customers

Compensation & Benefits

• Base Salary + Commission Structure

• OTE: $120,000-$160,000

• Uncapped earning potential

• Car allowance or mileage reimbursement. Earned Company Vehicle

• 401k Match

• Health benefits (if applicable)

• Paid time off

• Growth opportunities within a rapidly expanding company

What Success Looks Like

• 90 days: Active pipeline established, consistent weekly customer visits

• 6 months: Closed new OEM accounts and increased share of wallet in existing accounts

• 12 months: Consistently hitting gross profit targets and managing a stable book of business

Why Mid America?

• Fast decision-making (locally owned and operated)

• Ability to compete against national distributors with speed and service

• High-growth company with leadership opportunity

• Direct access to ownership and leadership

• Real impact on company trajectory

National Operations Manager

Full-Time

Remote, United States

Travel Required (Up to 70%)

CME Wire and Cable is seeking a strategic and results-driven National Warehouse Manager to lead U.S. warehouse, distribution, logistics, and commercial planning operations. This role is responsible for ensuring safe, compliant, efficient, and cost-effective supply chain operations aligned with long-term business and commercial objectives.

Key Responsibilities

• Lead safe and compliant warehouse operations across multiple U.S. distribution centers

• Ensure regulatory compliance including OSHA, environmental standards, Fire Department requirements, Department of Labor regulations, and CTPAT

• Oversee inbound logistics from Mexico and South America into the U.S., ensuring CBP compliance

• Manage U.S. warehouse capacity planning, space optimization, and lease negotiations

• Negotiate and manage transportation carriers and logistics service providers

• Track and improve on-time delivery performance

• Drive demand planning and optimize inventory levels balancing storage capacity, fill rate, and commercial goals

• Coordinate production planning with manufacturing plants

• Design and implement finished goods distribution processes

• Ensure adherence to inventory policies and controls

• Lead short- and mid-term commercial planning processes (Demand Estimates, POC, Distribution Reports, Bookings Reports)

• Consolidate sales forecasts, operational performance, and market projections

• Develop business cases to support growth and investment initiatives

• Monitor customer service performance and marginal contribution

• Partner with Sales to define regional and national commercial growth strategies

• Lead initiatives to accelerate growth and close competitive gaps

• Improve customer satisfaction through service excellence initiatives

• Analyze market and competitive trends to support strategic decision-making

• Strengthen strategic relationships with customers and key commercial partners

Qualifications

• 8+ years of experience in operations, supply chain, logistics, or commercial operations leadership

• Multi-site warehouse and distribution management experience

• Strong knowledge of U.S. regulatory compliance (OSHA, CBP, CTPAT preferred)

• Experience managing international inbound logistics

• Proven transportation negotiation experience

• Strong analytical, financial, and strategic planning skills

• Bachelor’s degree required; MBA preferred

Equal Opportunity Employer Statement

CME Wire & Cable, Inc. is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. CME Wire & Cable, Inc. makes hiring decisions based solely on qualifications, merit, and business needs at the time. For more information, read through our EEO Policy.

Benefits

401(k)

401(k) matching

Dental insurance

Vision insurance

Health insurance

Life insurance

Paid time off

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

How You'll Contribute:

The AV Installation and Support Services Technician is responsible for the installation, termination, testing, troubleshooting, and maintenance of low-voltage cabling systems, including voice, data, and video.

Assigned to Client and works full time from onsite location responsible for Installation and then maintaining the system after installation. Will conduct Preventive Maintenance and will assist with Service Tickets as needed. Will work with REMOTE support to troubleshoot Service Tickets as required.

This role ensures all work complies with industry standards and client requirements, with a focus on quality, safety, and efficiency. Technician will work onsite and will be responsible for preventive maintenance of the systems and will work with remote service technicians to address service tickets as needed.

What You'll Do:

• 
  
  
• Install, terminate, and test copper and fiber optic cabling for voice, data, and video systems.
  
  
• Interpret blueprints, floor plans, and wiring diagrams to determine cabling requirements and optimal routing.
  
  
• Perform troubleshooting and repairs on structured cabling systems and related hardware.
  
  
• Ensure all installations comply with relevant standards.
  
  
• Document all work performed, including test results and as-built drawings using BlueBeam.
  
  
• Collaborate with project managers, engineers, and other trades to ensure successful project completion.
  
  
• Maintain tools, equipment, and a safe, organized work environment.
  
  
• Provide technical support and guidance as needed.
  
  
• Participate in ongoing training to stay current with industry best practices and standards.
  
  
• Oversee all on-site activity on the active project job site and address any issues necessary to achieve quality and timeline standards
  
  
• Oversee all field operations and report progress, status and issues.
  
  
• Supervises the physical installation of a wide variety of technology into a wide variety of locations
  
  
• Maintains all quality control on jobsite, checking all work from subcontractors and union trades. Managing any discrepancies in our standards
  
  
• Able to read and understand functional design drawings and cable riser diagrams
  
  
• Able to complete assignments in accordance with or better than established task durations as well as estimate task durations to meet assigned deadlines. Provides daily feedback to Manager
  
  
• Able to build and wire custom panels from engineering drawings
  
  
• Advanced Fiber optic cable handling, installation termination and testing
  
  
• Responsible for tracking and maintaining toolkits, job material boxes, company vehicles and materials inventories. Keep clean, orderly and well documented
  
  
• Responsible for tracking and maintaining their personal licenses, certifications and qualifications. (Some states have specific requirements in this area)
  
  
• Maintain daily record of time worked on specific projects for timesheet entry. Maintain an activity log and a personnel log for skills to report on recommended improvements.
  
  
• Conduct routine Preventative Maintenance and logs as required.
  
  
• Work with Remote support for service tickets that require escalation.
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients' jobsites with no supervision. This position is responsible for the coordination with clients, contractors and subcontractors. This position will be the key and only field technician in many situations and will be responsible for delegating work, working with remote support, and communicating with key stakeholders on behalf of the company. Requires maintaining quality control on all field work. This position requires the highest level of technical and people skills along with great communication skills.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general, the service manager, project manager and supervisor are available to answer questions, but this position is very independent and will be looked upon to make many onsite decisions on behalf of the service manager and company. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

• 
  
  
• Work is performed in commercial, industrial, and construction environments.
  
  
• May require working in confined spaces, on ladders, lifts, or at heights.
  
  
• Must be able to lift and carry up to 50 lbs.
  
  
• Exposure to varying weather conditions and construction site hazards.
  
  

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis.

Employee will be responsible for their safety while on job sites and comply with all safety regulations in place by the client and Diversified. Use of PPE could be required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to be mobile around the client site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 50 pounds in construction areas.

The individual is regularly required to use keyboards, test equipment and controls required for installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee must possess a valid Passport for entry onto client site. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Occasional travel by airplane for out-of-town projects is required.

Safety:

Maintain and wear appropriate PPE as the job and tasks require it.

Ensure hazards are addressed and rectified in a timely manner.

What You'll Bring:

Education & Certifications:

• 
  
  
• High school diploma or equivalent required.
  
  

• 
  
  
• Must possess the E06 Limited Energy Systems License
  
  

• 
  
  
• OSHA 30 Certificate required
  
  
• Must have a valid US Passport.
  
  
• Must have a valid driver's license and adhere to our insurance requirements
  
  

Required Skills/Qualifications:

• 
  
  
• Minimum 2 years of experience in low-voltage or structured cabling installation.
  
  
• Possess advanced AV installation skills
  
  
• Familiarity with a wide range of audio, video and networking equipment
  
  
• Proficient in the use of cable testers, hand tools, and power tools.
  
  
• Ability to read and interpret technical documents and blueprints.
  
  
• Must have knowledge of the following programs: Teams, Outlook, Excel, OneNote, BlueBeam/Adobe Reader
  
  
• Willingness to travel to job sites as required.
  
  
• Excellent troubleshooting and problem-solving skills.
  
  
• Strong communication and teamwork abilities.
  
  
• Good verbal communication skills and good customer service skills
  
  
• Ability to diagnose, troubleshoot and resolve technical problems
  
  
• Able to work indoors/outdoors, standing, sitting and ladder use. Able to lift 50lbs.
  
  

Preferred Skills/Qualifications:

• 
  
  
• Experience with Service Now preferred.
  
  
• Experience with Software House preferred.
  
  

• 
  
  
• AVIXA CTS Certification is preferred.
  
  

• 
  
  
• AVIXA CTS-I Certification is highly encouraged
  
  

• 
  
  
• Installer (Level 1 or 2), Technician, or equivalent structured cabling certification preferred.
  
  
• Additional certifications from recognized structured cabling governing bodies are a plus.
  
  

Other relevant certifications may be required or preferred based on the technology focus of the position

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

Job Location:

Sacramento, CA 95834.

About the Job:

Title of the Position: Automation Technician

The Automation Technician ensures reliable operation of sterile pharmaceutical manufacturing systems by installing, maintaining, calibrating, and troubleshooting automation components, process instrumentation, drives, motors, control devices, clean utility systems, and aseptic production equipment. The role supports continuous and compliant operations under cGMP, FDA 21 CFR Part 11, and cleanroom standards.

Responsibilities:

• Install, maintain, calibrate, and troubleshoot sensors and transmitters for pressure, temperature, flow, level, pH, conductivity, and environmental monitoring.
• Support in performing GMP‑compliant calibrations with complete traceability and accurate documentation.
• Install, maintain, and troubleshoot motors, pumps, fans, drives, control devices, and sterile manufacturing equipment.
• Perform conduit bending, cable routing, wire pulling, cable termination, tray installation, and equipment connections in accordance with plant procedures.
• Install and modify control panels, junction boxes, and instrumentation assemblies.
• Diagnose issues in circuits, protection components, sensors, actuators, drives, and automated machines.
• Use diagnostic tools such as multimeters, clamp meters, insulation testers, and calibration instruments.
• Support PLC, HMI, SCADA, BMS, and EMS platforms, including troubleshooting and system checks.
• Conduct loop checks, functional tests, FAT/SAT, commissioning, and support validation activities (IQ/OQ/PQ).
• Maintain and troubleshoot systems for PW, WFI, Clean Steam, CIP/SIP, HVAC/HEPA controls, and aseptic filling/packaging operations.
• Read and interpret P&IDs, wiring diagrams, schematics, ladder logic, and loop drawings.
• Maintain cleanroom support systems, including differential pressure controls, HEPA filtration, and environmental monitoring.
• Ensure compliance with cGMP, cleanroom classification requirements, FDA 21 CFR Part 11, and data integrity principles.
• Perform preventive, corrective, and predictive maintenance.
• Conduct root‑cause analysis and implement CAPA actions.
• Maintain accurate CMMS entries, calibration logs, and audit‑ready documentation.

Working Condition:

• Ability to work rotating, weekend, or extended shifts.
• Exposure to high‑noise areas (PPE provided).
• Frequent work on mezzanine floors, elevated platforms, ladders, and step‑ups.
• Work inside aseptic cleanrooms and controlled environments (ISO 5/7/8) wearing full gowning.
• Exposure to hot, cold, humid, or pressurized utility systems such as PW, WFI, Clean Steam, and HVAC units.
• Occasional work in tight spaces, behind panels, or equipment enclosures.
• Regular use of PPE, including sterile gowning, gloves, and eye protection.
• Ability to lift to 50 lbs and perform hands-on tasks for extended periods.

Qualifications:

Education:

• BE – Mechanical/Chemical from a reputed University

Experience: Minimum 5 to 10 years of professional experience in the field of pharmaceutical or manufacturing industry.

Knowledge, Skills, and Abilities: Functional:

• Strong troubleshooting skills across sensors, transmitters, motors, drives, actuators, control components, automated machinery, and process systems.
• Experience with conduit bending, tray installation, cable pulling, wire routing, cable dressing, and termination.
• Proficiency in installing and modifying panels, junction boxes, and equipment assemblies.
• Skilled in using multimeters, clamp meters, insulation testers, and calibration devices.
• Ability to install, connect, and terminate control wiring and instrument cabling for field devices.
• Understanding of circuits, drives, starters, protection components, actuators, and control system diagnostics.
• Ability to read and interpret P&IDs, schematics, wiring diagrams, ladder logic, and loop documentation.
• Knowledge of GMP requirements, sterile manufacturing, cleanroom practices, aseptic operations, and validation processes.
• Strong documentation discipline, attention to detail, and audit readiness.
• Ability to work efficiently and safely in regulated manufacturing environments.

Behavioral:

• Result oriented
• Innovative thinking
• Time Management, Professional Work Conduct at all times
• Problem-solving ability & High level of self-motivation
• Strong interpersonal relationship skills
• Strong written & verbal communication skills

Requirements:

• Valid driver's license and acceptable driving record
• Legally authorized to be employed in the United States
• Must live or be willing to move to the Sacramento Metropolitan Region (Approx 40 miles' radius)

Benefits:

• Competitive Salary: $80,000 - $90,000
• Yearly bonus eligibility
• Benefits: offers a wide variety of benefits and programs to support health and well-being, including medical, dental, and vision coverage
• Paid time off plan
• 401k savings plan

• 
  
• Troubleshoots and resolves malfunctions to machine control systems and makes recommendations to improve efficiency or address quality concerns
  
• Experience and proficiency with ladder logic/PLC programming, Siemens experience required
  
• Develops new and modifies existing PLC and/or HMI applications, interfaces, or embedded control systems
  
• Participates in the set-up and commissioning of new systems or the upgrading of current systems
  
• Knowledge of AC and DC circuitry and electrical concepts
  
• Versatile in ladder logic and various PLC programming languages. Working knowledge of field control devices (motors, relays, switches, photoeyes, etc.)
  
• Designs, develops, maintains, and modifies instrumentation and control systems
  
• Start to finish electrical control system hardware design experience (control panel and field wiring)
  
• Competency in Electrical CAD
  
• Ability to work independently as well as in a team environment
  

• 
  
• Working knowledge of power distribution, networks, PLC, HMI, and drive hardware and software
  
• Ability to read and create schematic drawings using AutoCAD software
  
• Must be able to communicate effectively with Operators, Technicians, Management,a nd others
  
• Ability to work independently as well as in a team environment
  
• Must possess a sense of urgency and ownership when working within time constraints
  
• Must have strong computer skills and be proficient in Microsoft Word and Excel
  

• 
  
• Action Oriented
  
• Balances Stakeholders
  
• Collaborates
  
• Customer Focus
  
• Nimble Learning
  
• Plans and Aligns
  

• 
  
• 401k with Matching
  
• Family and Individual Insurance Packages (Health, Life, Dental, and Vision)
  
• Paid Time Off & Paid Holidays
  
• Long & Short-Term Disability
  
• Supplemental Insurance Plans
  
• Employee Assistance Program
  
• Employee Referral Program
  
• Tuition Reimbursement Programs
  
• Advancement & Professional Growth opportunities
  
• Parental Leave
  
• & More
  

Project Manager – Low Voltage / Structured Cabling

Salary: $82,000 – $88,000

Employment Type: Full-Time (40+ hours per week)

Work Environment: In-office with field coordination

Start Date: ASAP

Position Overview

Our client is seeking an experienced Project Manager with a strong background in low-voltage systems, structured cabling, and security infrastructure to oversee commercial technology projects from planning through completion.

This role offers the opportunity to work on diverse and technically engaging projects, including structured cabling, access control, and surveillance systems. The Project Manager will work closely with clients, field technicians, and internal teams to ensure projects are delivered on time, within budget, and to high technical standards.

The position involves responsibilities throughout the entire project lifecycle, including site walks, project estimation, technician oversight, scheduling, and final project documentation.

Key Responsibilities

• Conduct site walks and client meetings to determine project scope and requirements
• Prepare project estimates, proposals, and budgets
• Coordinate project schedules, labor resources, and materials
• Oversee field technicians and provide project direction
• Manage installation timelines and ensure project milestones are met
• Interpret blueprints, schematics, and technical drawings
• Track project costs and maintain budget control
• Communicate with clients, vendors, and subcontractors throughout the project lifecycle
• Manage project documentation and closeout deliverables

Required Experience

• Experience managing projects involving structured cabling, access control systems, and CCTV/security infrastructure
• Strong knowledge of commercial low-voltage systems
• Experience working on new construction and tenant improvement projects
• Ability to read and interpret blueprints, schematics, and technical documentation
• Strong organizational and communication skills
• Ability to manage multiple projects simultaneously

Preferred Technical Skills

• Experience with construction management platforms such as:
• Procore
• Bluebeam
• Other industry-standard project management tools
• Knowledge of construction estimating processes for telecommunications and security infrastructure
• Strong understanding of project scheduling, resource planning, and cost control

PMP certification is a strong plus.

Benefits

• Competitive salary ($82K – $88K)
• Profit sharing opportunities
• 401(k) with 5% company match
• Health insurance
• 70% employer paid for employees
• 50% employer paid for dependents
• Paid time off

Travel

Travel is required within the state, but overnight travel is not expected.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a Industrial Maintenance Electrician you will be a vital part of our manufacturing team installing, maintaining electrical equipment. Operate, install electrical systems and preform functional of building and plant equipment.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Operate, install electrical systems and perform functional testing of building and plant equipment (e.g., machines, motor controls, room re-models)

• Determine if system should be shut down or work must be performed with power source on

• Lock out, tag out, try out equipment and related systems

• Perform primary and secondary testing on electrical breakers during routine maintenance; replace, update and retro fit breakers

• Perform routine tests on high voltage switches and relays, using hi-potential test equipment (Hipot), replace switch or relay

• Troubleshoot electric motors using appropriate test equipment

• Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system

• Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel

• Service and maintain electrical systems on various types of overhead cranes

• Operate, install electrical systems and perform functional test of building and plant equipment (e.g., machines, motor controls, room re-models)

• Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent, halide, standard); clean and check sockets, and replace ballast and bulbs

• Run high voltage electrical cable from sub-station to unit station; cut and splice cable, test cable for resistance

• Install, replace and repair fiber optic cable for computers and computing systems

• Bend conduit and install junction boxes; pull wire of various gauge and color through conduit using a fish tape; install and connect switches and outlets

• Check work after completion or after each operation; ensure job is per drawing and WAC, NEC codes; evaluate job for work to be performed (e.g., wire size, electrical load, conduit)

• Operate mechanical lifts of various types (e.g. tiger lift, spider lift, snorkel lift), to access work areas

• Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in plant electrical systems

• Establish/verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters)

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 3+ years of experience as an Electrician or Apprentice.

• 1+ years of experience maintaining industrial equipment.

• Experience working from heights and using fall protection equipment with weight limitations .

• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

• Must be able to complete fall protection training.

Preferred Qualifications:

• Electrician license (EL01 &/or EL 07) or an electrical card.

• Crane related experience.

• Experience with prime power.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidate must live in the immediate are or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $33.32 per hour – $61.01 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Overview 

Mondo Media Solutions (MMS) is seeking a highly skilled Audio Video Field Installation Engineer to join our team. We specialize in full-service installations of audio, video, Theatrical lighting, access control, and surveillance systems for commercial applications. Located in Philadelphia, PA, this role offers both full-time and contract opportunities. 

Responsibilities 

• Lead installations, maintenance, and troubleshooting of commercial audio/video systems, including conference rooms, access control, and security camera systems. 
• Install projection systems, wiring, termination A/V systems, loudspeakers, cameras, and displays. 
• Troubleshooting basic network routers and switches. 
• Engage in DSP programming, particularly with Q-SYS, 
• Install and Troubleshoot conference room setups and equipment. 
• Fabricate racks, pull and dress cables, and manage cable terminations. 
• Provide friendly customer service during installation and servicing tasks. 
• Updating onsite installation software throughout the day. 

Requirements 

• Minimum 5 years of experience as a commercial A/V installer. 
• Must be able to independently diagnose and repair onsite issues with networking, security cameras, distributed audio systems, and conference room systems.  
• Proficient in DSP programming, preferably with QSYS, Extron 
• Experienced in control systems, QSC QSYS systems, including coding and troubleshooting. 
• Familiar with using power tools like drills, saws, and rotary hammers.
• Obtain or pass OSHA 10 certification within 30 days and Obtain or pass OSHA 30 certification within 90 days  
• CTS certification within 90 days 
• Strong organizational skills, attention to detail, and the ability to manage multiple projects. 
• Excellent communication skills, both verbal and written. 
• Ability to safely lift up to 50 pounds work comfortably on ladders up to 12 feet, and lifts over 26 feet. 
• Proficiency in soldering and cable terminations, including XLR, TRS, RCA, and more. 
• Familiarity with Microsoft Office and various web-based portals. 
• Ability to fit into tight spaces and quickly learn new computer programs. 

Compensation & Benefits 

• Medical and Dental Benefits
• 401K 
• Company Vehicle Use 

Additional Information 

• Candidates must be detailed, organized, and have a proven track record of reliability. 
• Committed to the company's Mission, Vision, and Values. 
• Ability to identify and handle various cable types and connectors. 
• Experience with basic and advanced hand tools is essential. 

About Mondo Media Solutions 

Mondo Media Solutions specializes in custom audiovisual, IT, and security systems for businesses, schools, and government. From boardrooms and auditoriums to digital signage, we deliver reliable, scalable technology solutions with a commitment to integrity and customer satisfaction. 

Position Summary

603 Manufacturing is growing, and we are looking for a hands-on, detail-driven NPI / Manufacturing Engineer who thrives on turning complex, high-reliability builds into clean, repeatable, audit-ready processes. This role is especially critical as we support customers in the space and aerospace sectors, where documentation, traceability, and process control are non-negotiable. If you get fired up about transforming first builds into flight-ready production systems, this role is for you.

What You’ll Do

Lead New Product Introduction (NPI)

• Own the manufacturing ramp-up for new cable and electro-mechanical assemblies
• Translate engineering drawings, specifications, and customer requirements into production-ready processes
• Support and fully document first piece builds from prototype through production release
• Ensure builds meet space and aerospace level workmanship and documentation standards

Develop Flight-Ready Work Instructions

• Create clear, visual, step-by-step work instructions for complex cable assemblies
• Standardize documentation across programs to meet customer and regulatory expectations
• Build controlled, revision-managed documentation packages
• Incorporate inspection criteria, torque values, crimp specifications, test procedures, and traceability requirements

Space and Aerospace Compliance

• Interpret and implement customer flow-down requirements
• Ensure compliance with applicable standards such as:
• IPC/WHMA-A-620, Space Addendum preferred
• NASA workmanship standards where applicable
• AS9100 principles and documentation rigor
• Establish full material traceability and lot control processes
• Support first article inspections and customer audits
• Build processes that are repeatable, traceable, and audit-ready

First Piece and Process Development

• Capture photos, tooling setups, fixturing, inspection points, and lessons learned during first builds
• Identify risk areas early including handling, routing, strain relief, testing, and labeling
• Define quality gates and inspection checkpoints
• Convert tribal knowledge into controlled documentation

Standardization and Continuous Improvement

• Develop scalable templates for cable assembly documentation
• Drive consistency across programs and operators
• Improve throughput while maintaining zero-defect expectations
• Reduce variability in high reliability builds

What Makes You a Great Fit

• 5 or more years in manufacturing engineering, NPI, or process engineering
• Direct experience supporting space, aerospace, or other high-reliability customers
• Strong understanding of:
• IPC/WHMA-A-620, Space Addendum strongly preferred
• First Article Inspection, AS9102 experience a plus
• Configuration control and revision management
• Lot traceability and material control systems
• Experience building processes that withstand customer audits
• Comfortable on the production floor. This is not a desk-only role.
• Process-driven, detail-focused, and quality-first mindset

Bonus Points If You Have

• Experience supporting NASA, commercial space, or defense programs
• Experience working in an AS9100 environment
• Familiarity with controlled documentation systems such as PLM, ERP, or QMS
• Lean or Six Sigma background
• Experience building documentation systems from scratch

What Success Looks Like

• New space programs transition from first article to stable production smoothly
• Documentation passes audits without scrambling
• Full traceability exists from raw material to finished assembly
• Operators have clear, easy-to-follow instructions
• Builds are consistent, repeatable, and flight-ready

Why 603 Manufacturing?

We support customers who cannot afford failure. When it goes to space, it must work.

At 603, we are building the systems, documentation discipline, and manufacturing rigor to support high-reliability programs. We need engineers who understand what that truly requires.

You will not just document processes here. You will build the foundation for flight-ready manufacturing.

• Receives maps and staking sheets for the full construction project and ensures project is built, with limited guidance from supervisors.
• Communicates updates to the project team as required.
• Manages daily and weekly project work based on deadlines, material and equipment availability, weather, and other factors.
• Coordinates with supervisor to ensure continual supply of work and availability of materials.
• Drafts and submits redlines upon completion of project.
• Ensures locates are performed on time and prior to team and equipment arriving at the worksite.
• Regularly engages municipalities, utility companies, suppliers, contractors, and property owners in order to smoothly coordinate project tasks and avoid disputes.
• Reads construction plans and municipality permits, and determines approach for completing work.
• Maintains all project documentation and records costs of project materials and material transfers.
• Ensures DOT inspections are performed on equipment.
• Works with project managers to ensure projects remain on schedule and within budget.
• Performs general construction labor in various weather conditions while utilizing safety fundamentals.
  • Advanced operation of trenchers, backhoes, end loaders, plows, and other excavating equipment to construct and maintain outside plant cable facilities.
  • Advanced operation of all test equipment associated with outside plant facilities and construction duties.
  • Installs, troubleshoots, tests, splices, repairs, and maintains fiber optic facilities.
  • Identifies location of defective cable using various test equipment and repairs buried, aerial, underground, and/or customer cable.
  • Locates cable and fiber in response to customer requests and/or construction needs.
  • Performs cable fault acceptance tests on newly constructed facilities.
• Actively trains, monitors, and coaches team members while sharing construction knowledge and experience. Performs quality control inspections and makes training recommendations. Ensures safety protocols are enforced.
• Services, cleans, maintains, and repairs equipment.
• Completes all related paperwork in a timely manner.
• Provides assistance to field services technicians, as needed.

• 2+ years of construction equipment operation utilizing various underground and aerial construction equipment such as directional drills, trencher/plow/rock saw, backhoe, or bucket trucks -OR- current military service, or prior military service with honorable discharge.
• 1+ years of experience leading construction projects as a crew foreperson or project manager.
• Must follow the TDS attendance guidelines in order to meet TDS's business needs including but not limited to our obligations to our customers and to our customers' needs.
• Must have and maintain a valid driver's license and remain eligible for DOT requirements.

• Must have the ability to obtain a Class A CDL. A current CDL is preferred at hire, but TDS will train and certify eligible associates through its in-house CDL certification program after hire.
• Physical requirements may vary based on company needs: Ability to climb poles, ladders, towers, and other structures as needed. Ability to kneel, dig, lift, and pull.
• Upon hire, must successfully pass all components of the Safety Training course curriculum.
• Upon hire, must successfully complete customer-specific requirements, which may include a background check administered by the customer.
• Preferred 2+ years' experience in the construction of fiber optic cable outside plant networks -OR- 2+ years installation of any underground or overhead utilities will be considered.
• Understanding of telecommunication products and services.
• Proven organizational skills and ability to multi-task.
• May require occasional travel.
• Must be willing to work overtime as needed. May be required to work various/swing shifts as business needs dictate.
• Must be able to operate vehicles with manual transmissions.

• Medical Coverage
• Dental Coverage
• Vision Coverage
• Life Insurance
• 401(k) Plan
• Generous Vacation & Paid Sick Leave
• Seven Paid National Holidays & One Floating Holiday
• Paid Parental Leave (6 weeks after 12 months of employment)
• Adoption & Surrogacy Assistance
• Employee Assistance & Wellness Programs

• Short-Term & Long-Term Disability
• TDS Service Discounts
• Education Assistance
• Paid Volunteer Time

• Receives maps and staking sheets for the full construction project and ensures project is built, with limited guidance from supervisors.
• Communicates updates to the project team as required.
• Manages daily and weekly project work based on deadlines, material and equipment availability, weather, and other factors.
• Coordinates with supervisor to ensure continual supply of work and availability of materials.
• Drafts and submits redlines upon completion of project.
• Ensures locates are performed on time and prior to team and equipment arriving at the worksite.
• Regularly engages municipalities, utility companies, suppliers, contractors, and property owners in order to smoothly coordinate project tasks and avoid disputes.
• Reads construction plans and municipality permits, and determines approach for completing work.
• Maintains all project documentation and records costs of project materials and material transfers.
• Ensures DOT inspections are performed on equipment.
• Works with project managers to ensure projects remain on schedule and within budget.
• Performs general construction labor in various weather conditions while utilizing safety fundamentals.
  • Advanced operation of trenchers, backhoes, end loaders, plows, and other excavating equipment to construct and maintain outside plant cable facilities.
  • Advanced operation of all test equipment associated with outside plant facilities and construction duties.
  • Installs, troubleshoots, tests, splices, repairs, and maintains fiber optic facilities.
  • Identifies location of defective cable using various test equipment and repairs buried, aerial, underground, and/or customer cable.
  • Locates cable and fiber in response to customer requests and/or construction needs.
  • Performs cable fault acceptance tests on newly constructed facilities.
• Actively trains, monitors, and coaches team members while sharing construction knowledge and experience. Performs quality control inspections and makes training recommendations. Ensures safety protocols are enforced.
• Services, cleans, maintains, and repairs equipment.
• Completes all related paperwork in a timely manner.
• Provides assistance to field services technicians, as needed.

• 2+ years of construction equipment operation utilizing various underground and aerial construction equipment such as directional drills, trencher/plow/rock saw, backhoe, or bucket trucks -OR- current military service, or prior military service with honorable discharge.
• 1+ years of experience leading construction projects as a crew foreperson or project manager.
• Must follow the TDS attendance guidelines in order to meet TDS's business needs including but not limited to our obligations to our customers and to our customers' needs.
• Must have and maintain a valid driver's license and remain eligible for DOT requirements.

• Must have the ability to obtain a Class A CDL. A current CDL is preferred at hire, but TDS will train and certify eligible associates through its in-house CDL certification program after hire.
• Physical requirements may vary based on company needs: Ability to climb poles, ladders, towers, and other structures as needed. Ability to kneel, dig, lift, and pull.
• Upon hire, must successfully pass all components of the Safety Training course curriculum.
• Upon hire, must successfully complete customer-specific requirements, which may include a background check administered by the customer.
• Preferred 2+ years' experience in the construction of fiber optic cable outside plant networks -OR- 2+ years installation of any underground or overhead utilities will be considered.
• Understanding of telecommunication products and services.
• Proven organizational skills and ability to multi-task.
• May require occasional travel.
• Must be willing to work overtime as needed. May be required to work various/swing shifts as business needs dictate.
• Must be able to operate vehicles with manual transmissions.

• Medical Coverage
• Dental Coverage
• Vision Coverage
• Life Insurance
• 401(k) Plan
• Generous Vacation & Paid Sick Leave
• Seven Paid National Holidays & One Floating Holiday
• Paid Parental Leave (6 weeks after 12 months of employment)
• Adoption & Surrogacy Assistance
• Employee Assistance & Wellness Programs

• Short-Term & Long-Term Disability
• TDS Service Discounts
• Education Assistance
• Paid Volunteer Time

Reports To: Team Lead Technician / Project Manager

Summary

The Field Technician is responsible for supporting the installation, testing, and servicing of

low-voltage systems under the direction of a Team Lead Technician. This role focuses on

executing installation tasks with precision, maintaining jobsite productivity, and upholding

company quality and safety standards.

The Field Technician plays a key role in project execution by performing hands-on technical

work, maintaining organized job sites, and contributing to efficient project delivery.

Key Responsibilities

Installation & Technical Support

• Install and support low-voltage systems including:
• Structured cabling (Cat5e, Cat6, Cat6A, fiber optic)
• Security systems (IP cameras, access control, intrusion detection)
• MDF/IDF buildouts and network rack installations
• Conduit, pathways, and cable management systems
• Pull, terminate, label, and test copper and fiber cabling
• Assist with device mounting, rack assembly, and system hardware installation
• Follow installation plans, drawings, and instructions provided by the Team Lead
• Maintain installation quality according to manufacturer specifications and company standards

Jobsite Support & Execution

• Follow direction from the Team Lead Technician to complete assigned daily tasks
• Maintain productivity and adhere to project timelines
• Keep job sites clean, organized, and professional
• Assist with material handling, staging, and inventory tracking
• Support punch list completion and project closeout tasks

Testing & Documentation

• Assist with cable testing and certification
• Label cables, racks, and devices accurately
• Support as-built documentation and reporting
• Report installation issues or discrepancies to the Team Lead promptly

Safety & Compliance

• Follow OSHA and company safety policies at all times
• Use proper PPE and maintain safe work practices
• Safely operate ladders, lifts, power tools, and company equipment
• Participate in job hazard assessments and safety meetings

Required Qualifications

• 1–3+ years of experience in the low-voltage industry preferred (entry-level candidates with relevant construction or technical experience considered)
• Basic knowledge of structured cabling and security system installations
• Ability to use hand tools, power tools, and testing equipment
• Ability to read basic drawings and follow technical instructions
• Strong work ethic and willingness to learn
• Valid driver’s license with acceptable driving record
• Ability to lift up to 50 lbs and work on ladders and lifts
• Ability to pass background check and drug screening

Preferred Certifications (Not Required)

• OSHA 10
• BICSI Installer (Level 1)
• Manufacturer training certifications
• Fiber termination training

Work Environment

• Field-based role on commercial and industrial job sites
• Indoor and outdoor environments
• Travel to job sites as required
• Occasional overtime based on project schedules

Performance Expectations

• Maintain quality installation standards
• Demonstrate reliability, punctuality, and accountability
• Follow direction and work effectively within a team
• Contribute to meeting project deadlines
• Uphold company culture and safety standards