Cable Remote App Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

Please note the location is I-17 and the Loop 303

The Project Manager is the overall manager for assigned project(s). The Project Manager ensures that all contracted work is developed, implemented, installed and managed in accordance with the Company’s requirements, including but not limited to, safety, quality, management and financial performance requirements. All aspects of the assigned project(s) must be carried out as efficiently as possible with respect to staffing, materials management, financial management, customer care and customer delivery goals.

General Job Duties and Responsibilities:

• The Project Manager will recruit, hire, train, manage, supervise, promote, discipline and discharge, if necessary, all project related staff. Effectively manage all human resource issues (and escalate as needed) per Company policies and procedures. Complete recommendations for project related employees’ performance ratings, promotions and pay changes. Provide guidance and mentoring to meet all customer and Company goals and objectives.
• The Project Manager will manage the workload distribution and monitor the customer delivery and job installation progress.
• The Project Manager will plan for, manage, monitor and maintain project profitability to achieve Company goals.
• The Project Manager reviews all job cost postings for accuracy and completeness, including but not limited to, the preparation of invoices, customer collections and periodic financial reporting to the customer and management.
• The Project Manager will manage all related quality and safety issues on customer work.
• The Project Manager will participate in and/or facilitate the bid process.
• The Project Manager acts as the Company liaison for interface with customer representative(s).
• The Project Manager will create, develop and implement account process improvement(s).
• Other responsibilities as assigned.

Physical and Mental Requirements:

• The Project Manager must be self-motivated, positive in approach, professional and lead others to create, develop and implement project process improvement(s).
• Must promote the Company culture and mission to all employees, vendors, clients and business partners.
• Must have proven problem-solving skills, critical thinking skills and the ability to effectively read, write and give oral presentation(s).
• Must have proven high skill level to interpret blueprints and other project documents, including but not limited to, specifications, reporting and quality requirements.
• Must be able to travel within branch territory and/or regional territory as needed.
• Must have the ability to learn Company and customer project management systems. The Security Systems Foreman must also have proven high skill level to interpret blueprints and other project documents, including but not limited to, specifications, reporting and quality requirements.
• Must be able to secure and maintain a Company sponsored American Express Card.
• Must be able to use the following trade Tools: punch tool with 110 block and 66 block blade, 6/8 position combo crimp tool, Krone/3M/BIX, butt set, volt-ohmmeter, 4-pair continuity tester and 5-gang punch tool.
• Regular attendance is mandatory.

Education, Certification, License, and Skill Requirements:

• Must possess at least a High School diploma or GED equivalency; Bachelor’s Degree preferred.
• Must have experience in customer interface, such as liaison between the customer and the Company.
• Must possess a minimum of five (5) years of supervisory or managerial experience.
• Must have a minimum of five (5) years of experience in telecommunications or a related technical or construction field.
• Must be proficient with Microsoft Office (Word, Excel and MS Project).
• Must meet Company minimum driving standards.
• Must be able to manage multiple tasks/projects simultaneously.
• Must have demonstrated verifiable ability to define a project, create a project scope of work, develop detailed associated tasks and manage these to final completion and customer turnover.

Career Path:

• Position promotes into Operations Manager or Branch Manager.

Min

USD $85,000.00/Yr.

MAX USD $120,000.00/Yr.

Overview

IES is a national provider of industrial products and infrastructure services to a variety of end markets, including electrical, mechanical and communications contracting solutions for the commercial, industrial, residential and renewable energy markets. IES is publicly traded on NASDAQ under the symbol IESC. As of the end of IES’s 2025 fiscal year ending September 30, 2025, IES produced over $3.3 billion in revenue and employed over 9,400 employees at over 174 domestic locations across the United States. IES is an Equal Employment Opportunity Employer: Minorities, Females, Gender Identity, Sexual Orientation, Individuals with Disabilities, Protected Veterans Encouraged to Apply.

EEO Statement

PLEASE NO AGENCY CALLS.

NOTE TO ALL AGENCIES: Any unsolicited agency resumes or agency represented candidates that are presented to any IES employee without first having a signed contract between that agency and the IES Talent Acquisition organization will become the property of IES and no fees will be paid.

EEO & Affirmative Action

The IES policy on equal employment opportunity prohibits discrimination based on race, color, religion, national origin, sex, age, gender identity, sexual orientation, individuals with disabilities, protected veterans, or any other protected status or characteristic. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment, and also states that retaliation against any employee who files a complaint regarding possible violations of this policy will not be tolerated. IES is also committed to taking affirmative steps to promote the employment of minorities, women, individuals with disabilities, and protected veterans. IES develops affirmative action programs to support its commitment to equal employment opportunity, consistent with company policy and the company’s obligations as a contractor to the United States government.

View Your Equal Employment Opportunity rights under the law. "Know Your Rights: Workplace Discrimination is Illegal; Conozca sus Derechos: La Discriminación en el Lugar de Trabajo es Ilegal

Disability Accommodation

IES is an Equal Opportunity/Affirmative Action Employer. IES provides reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Era Veterans' Readjustment Assistance Act of 1974 and Title I of the Americans with Disabilities Act of 1990. Applicants who need accommodation in the job application process should contact the IES corporate office at (713) 860-1500 or any IES office to request assistance.

IES Participates in E-Verify/IES participa en el programa E-Verify

E-Verify Information/ Información sobre E-Verify

English/Español

Right to Work/Ley de Derecho al Trabajo

English/Español

Midcon Cables Company, a leading provider of cabling and wire interconnect solutions for the military and aerospace industry has an immediate opening for a Manufacturing Engineer at our Bennettsville, SC facility.

Midcon incorporates new methods and technologies such as patented Everflex wire management system to provide value added solutions for interconnect applications.

Eligible candidates need a bachelor's degree in Engineering. 3-5 years’ experience in electrical, mechanical, manufacturing, or industrial engineering is required. The manufacturing engineer will report directly to the Engineering Manager and will assist engineering by performing a variety of duties. These duties will include process work instruction development, enhancement, evaluation of manufacturing processes and initiating engineering change notices.

Must be proficient in the use of personal computers, windows-based programs and related software as required. Be able to work with Auto CAD and be familiar with other 3-D design software packages. Ability to work in a self-directed, cross-functional work team environment is a must. Customer communication may be required. Excellent written and organizational skills are a must. A strong project management background with emphasis in methods improvement and experience in providing hands-on manufacturing support are essential.

Midcon Cables Company is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.

Employee Only Medical, Dental, and Vision coverage for about $15/week. Take home more of your pay with low-cost benefits! Weekends Off!

The Inside Sales Representative is responsible for meeting and exceeding overall sales objectives while ensuring a high level of customer service when promoting TPC products and strategic initiatives.

Responsibilities

• Drive new account generation for the organization through a daily cadence of prospecting and qualification activities.
• Develop undersold locations by identifying new applications and opportunities in a remote selling environment (digital, phone, etc.)
• Execute daily outbound sales calls & manage inbound calls
• Perform product demonstrations effectively over the phone and video
• Create territory / account plans and achieve sales objectives
• Align with internal resources to execute account plans
• Understand end market trends and industry best practices; utilize relevant value propositions to those end markets
• Proficiently sell both standard in-line and custom solutions
• Other duties as assigned

Qualifications

• 2+ years sales experience, preferably in an industrial setting
• Proven track record of meeting and exceeding sales objectives
• Strong communication, organizational and time management skills
• Ability to listen and overcome objections
• Ability to embrace change
• Effective time management and organizational skills
• Bachelor’s degree in business, industrial distribution, engineering/technology or related years’ experience
• Previous industrial sales experience a plus

Working Conditions

• Full-time position with standard office hours.
• Flexibility may be required to support executive schedules, events, or urgent priorities.
• This position is eligible for the hybrid work schedule

• TPC Wire & Cable Corp. is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or any other protected characteristic.

Customs and Border Protection Officer (CBPO) NEW RECRUITMENT INCENTIVES! U.S.

Customs and Border Protection (CBP) offers those interested in a career in law enforcement an exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.

You will be part of the Department of Homeland Security workforce, protecting American interests and securing our nation.

If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to make your move.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW As a Customs and Border Protection Officer (CBPO) , you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity.

Being a CBPO makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include: Enforcing customs, immigration, and agriculture laws and regulations.

Facilitating the flow of legitimate trade and travel.

Conducting inspections of individuals and conveyances.

Determining the admissibility of individuals for entry into the United States; and Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband.

Duty Locations – Incentives available for some locations You will be asked to provide your preference for one of the following mission-critical locations: Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, San Ysidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando FL; Honolulu, HI; Chicago, IL; Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, and Sault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, and Wild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, Trout River, and Buffalo NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo, Presidio, Progreso and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT; Blaine, Oroville, and Sumas, WA.

The preference locations listed above are expected to have vacancies available in the future, however, if the duty locations do not have vacancies at the time of your final offer, you may be offered a duty location in another geographic location within the United States.

Locations offered are based on operational and mission requirements and critical agency hiring needs for entry-level CBPOs as determined by the CBP Office of Field Operations (OFO).

Salary – and Duty Location Recruitment Incentives – and Benefits Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a three-year service contract, in the following locations: Arizona: Douglas, Lukeville, Nogales, San Luis California: Calexico Hawaii: Honolulu Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro Michigan: Detroit, Port Huron, Sault Sainte Marie Minnesota: Grand Portage, International Falls Montana: Raymond, Sweetgrass New York: Alexandria Bay, Champlain, Massena, Trout River North Dakota: Dunseith, Portal Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford Washington: Blaine, Oroville Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a four-year service contract, in the following locations: California: Otay Mesa, San Francisco, San Ysidro, Tecate Florida: Key West North Dakota: Pembina Annual Base Salary for newly appointed CBPOs varies as follows: GS-9 $61,111
- $124,443 per year Locality pay varies by duty location.

Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary.

Grade level eligibility and salaries vary depending upon background, including experience and education, and duty location of the opportunity.

This is a career ladder position with a grade level progression of GS-5, GS-7, GS-9, GS-11, and GS-12.

You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in each grade level.

Promotions are at the discretion of the agency.

Officers are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications: You qualify for the GS-9 grade level in one of the following ways: experience, education, or a combination of both.

Experience: A minimum of one (1) year of specialized experience equivalent to at least the next lower grade level that includes: Detaining suspected violators of federal, state, or local laws and/or arresting violators using the proper law enforcement methods.

Enforcing the laws and regulations relating to importing, exporting, and/or international shipping to and from the United States.

Utilizing intelligence techniques and behavior analysis to identify potential threats and perform risk assessments for violations of laws and threats to national security.

Conducting interviews in a law enforcement capacity for the purposes of gaining information from suspected violators of laws to determine the appropriate course of action.

The above experience will be applied in connection with the following: Ability to make rapid, accurate judgments and decisions with respect to the application of the regulations, instructions, and procedures for importing and exporting merchandise to and from the United States; or enforcement and administration of laws relating to the right of persons to enter, reside in or depart from the United States, Guam, Puerto Rico, and the U.S.

Virgin Islands.

Education Substitution: A master's (or higher) degree, or two or more years of progressively higher-level graduate education leading to such a degree, or an LL.B.

or J.D.

from an accredited college or university; OR Combination of Experience and Education: A combination of specialized experience AND successfully completed graduate-level education.

This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Other Requirements: Citizenship : You must be a U.S.

Citizen to apply for this position.

Residency : You must have had primary U.S.

residency (includes protectorates as declared under international law) for at least three (3) of the last five (5) years.

Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.

Candidates must be referred for selection to the Customs and Border Protection Officer position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.

The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

Veterans' Preference : You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA).

The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training : You will be required to complete a paid pre-academy orientation for approximately two (2) weeks at your home port.

You will then attend a 101-day training program – CBP Field Operations Academy – conducted at the Federal Law Enforcement Training Center (FLETC) located in Glynco, GA.

This training consists of basic law enforcement skills, immigration laws, firearms training, examination of cargo/bags/merchandise, physical fitness, etc.

Candidates assigned to the southern border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program, which will be completed at their home port.

Successful completion of the Academy is required for this position .

How to Apply: Click the Apply button on this site.

You will be linked to the CBP Talent Network page.

For Position of Interest , select Customs and Border Protection Officer.

You'll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application.

Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit.

You will be evaluated based on your resume, supporting documents, and the CBPO Entrance Exam.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with OFO and CBP.

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

How You'll Contribute:

The AV Installation and Support Services Technician is responsible for the installation, termination, testing, troubleshooting, and maintenance of low-voltage cabling systems, including voice, data, and video.

Assigned to Client and works full time from onsite location responsible for Installation and then maintaining the system after installation. Will conduct Preventive Maintenance and will assist with Service Tickets as needed. Will work with REMOTE support to troubleshoot Service Tickets as required.

This role ensures all work complies with industry standards and client requirements, with a focus on quality, safety, and efficiency. Technician will work onsite and will be responsible for preventive maintenance of the systems and will work with remote service technicians to address service tickets as needed.

What You'll Do:

• 
  
  
• Install, terminate, and test copper and fiber optic cabling for voice, data, and video systems.
  
  
• Interpret blueprints, floor plans, and wiring diagrams to determine cabling requirements and optimal routing.
  
  
• Perform troubleshooting and repairs on structured cabling systems and related hardware.
  
  
• Ensure all installations comply with relevant standards.
  
  
• Document all work performed, including test results and as-built drawings using BlueBeam.
  
  
• Collaborate with project managers, engineers, and other trades to ensure successful project completion.
  
  
• Maintain tools, equipment, and a safe, organized work environment.
  
  
• Provide technical support and guidance as needed.
  
  
• Participate in ongoing training to stay current with industry best practices and standards.
  
  
• Oversee all on-site activity on the active project job site and address any issues necessary to achieve quality and timeline standards
  
  
• Oversee all field operations and report progress, status and issues.
  
  
• Supervises the physical installation of a wide variety of technology into a wide variety of locations
  
  
• Maintains all quality control on jobsite, checking all work from subcontractors and union trades. Managing any discrepancies in our standards
  
  
• Able to read and understand functional design drawings and cable riser diagrams
  
  
• Able to complete assignments in accordance with or better than established task durations as well as estimate task durations to meet assigned deadlines. Provides daily feedback to Manager
  
  
• Able to build and wire custom panels from engineering drawings
  
  
• Advanced Fiber optic cable handling, installation termination and testing
  
  
• Responsible for tracking and maintaining toolkits, job material boxes, company vehicles and materials inventories. Keep clean, orderly and well documented
  
  
• Responsible for tracking and maintaining their personal licenses, certifications and qualifications. (Some states have specific requirements in this area)
  
  
• Maintain daily record of time worked on specific projects for timesheet entry. Maintain an activity log and a personnel log for skills to report on recommended improvements.
  
  
• Conduct routine Preventative Maintenance and logs as required.
  
  
• Work with Remote support for service tickets that require escalation.
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients' jobsites with no supervision. This position is responsible for the coordination with clients, contractors and subcontractors. This position will be the key and only field technician in many situations and will be responsible for delegating work, working with remote support, and communicating with key stakeholders on behalf of the company. Requires maintaining quality control on all field work. This position requires the highest level of technical and people skills along with great communication skills.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general, the service manager, project manager and supervisor are available to answer questions, but this position is very independent and will be looked upon to make many onsite decisions on behalf of the service manager and company. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

• 
  
  
• Work is performed in commercial, industrial, and construction environments.
  
  
• May require working in confined spaces, on ladders, lifts, or at heights.
  
  
• Must be able to lift and carry up to 50 lbs.
  
  
• Exposure to varying weather conditions and construction site hazards.
  
  

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis.

Employee will be responsible for their safety while on job sites and comply with all safety regulations in place by the client and Diversified. Use of PPE could be required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to be mobile around the client site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 50 pounds in construction areas.

The individual is regularly required to use keyboards, test equipment and controls required for installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee must possess a valid Passport for entry onto client site. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Occasional travel by airplane for out-of-town projects is required.

Safety:

Maintain and wear appropriate PPE as the job and tasks require it.

Ensure hazards are addressed and rectified in a timely manner.

What You'll Bring:

Education & Certifications:

• 
  
  
• High school diploma or equivalent required.
  
  

• 
  
  
• Must possess the E06 Limited Energy Systems License
  
  

• 
  
  
• OSHA 30 Certificate required
  
  
• Must have a valid US Passport.
  
  
• Must have a valid driver's license and adhere to our insurance requirements
  
  

Required Skills/Qualifications:

• 
  
  
• Minimum 2 years of experience in low-voltage or structured cabling installation.
  
  
• Possess advanced AV installation skills
  
  
• Familiarity with a wide range of audio, video and networking equipment
  
  
• Proficient in the use of cable testers, hand tools, and power tools.
  
  
• Ability to read and interpret technical documents and blueprints.
  
  
• Must have knowledge of the following programs: Teams, Outlook, Excel, OneNote, BlueBeam/Adobe Reader
  
  
• Willingness to travel to job sites as required.
  
  
• Excellent troubleshooting and problem-solving skills.
  
  
• Strong communication and teamwork abilities.
  
  
• Good verbal communication skills and good customer service skills
  
  
• Ability to diagnose, troubleshoot and resolve technical problems
  
  
• Able to work indoors/outdoors, standing, sitting and ladder use. Able to lift 50lbs.
  
  

Preferred Skills/Qualifications:

• 
  
  
• Experience with Service Now preferred.
  
  
• Experience with Software House preferred.
  
  

• 
  
  
• AVIXA CTS Certification is preferred.
  
  

• 
  
  
• AVIXA CTS-I Certification is highly encouraged
  
  

• 
  
  
• Installer (Level 1 or 2), Technician, or equivalent structured cabling certification preferred.
  
  
• Additional certifications from recognized structured cabling governing bodies are a plus.
  
  

Other relevant certifications may be required or preferred based on the technology focus of the position

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

Trexon multiplies the strength of its brands, expanding engineering and manufacturing capacity to deliver superior performance. Our collective knowledge informs versatile cable, connector, and cable assembly solutions covering a full spectrum of critical applications.

Our expertise enables durable cable assembly solutions that ensure continuity of power, signal, and data for critical applications. We thrive in harsh environments, providing reliable performance where it matters most.

Our expertise enables durable cable assembly solutions that ensure continuity of power, signal, and data for critical applications. We thrive in harsh environments, providing reliable performance where it matters most.

Our expertise enables durable cable assembly solutions that ensure continuity of power, signal, and data for critical applications. We thrive in harsh environments, providing reliable performance where it matters most.

Our expertise enables durable cable assembly solutions that ensure continuity of power, signal, and data for critical applications. We thrive in harsh environments, providing reliable performance where it matters most

Our expertise enables durable cable assembly solutions that ensure continuity of power, signal, and data for critical applications. We thrive in harsh environments, providing reliable performance where it matters most.

Our expertise enables durable cable assembly solutions that ensure continuity of power, signal, and data for critical applications. We thrive in harsh environments, providing reliable performance where it matters most

When there's a high cost of failure, Trexon provides power, signal, and data for vital applications in the most harsh environments.

1200 Employees Globally

70+ Engineering FTE's

400,000 Sq Ft Manufacturing space

250+ A&D programs supported

80+ QC Experts

Explore upcoming events:

DSEI UK: , Excel London Royal Victoria Dock 1 Western Gateway, London E16 1XL, Booth #S4-151

European Microwave Week 2025: , Utrecht, the Netherlands, Booth #E106

MedDevice 2025: , Boston Convention & Exhibition Center, Boston MA, Booth #214

Explore how Trexon meets and exceeds industry standards to deliver excellence in every product we create.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :  

• This position is for a variety of shifts   

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :  

• This position is for a variety of shifts   

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Description

Key job responsibilities Partner with cable vendors to install, inspect and troubleshoot cabling Installation and maintenance of copper and fiber cable infrastructure Install, test and troubleshoot fiber optic and copper cabling, including patch panels and patch cords
Ensure that the Data Center and vendor installations comply with all installation practices
Report current status via ticketing system, status reports, email and slack
Manage work and priorities through ticketing system and workflows to complete customer requests and projects
Maintain accurate records and document problems and processes to successfully draft and execute changes within data centers
Exhibit quality workmanship on all work and maintain site cleanliness
Work with a partner to move integrated enterprise equipment from loading docks into planned positions
Manage, check and coordinate all materials to be delivered to site daily
Carry cell phone for communication, information, and emergencies
Up to 50% travel within geographical work area may be required; some travel outside traditional work area may be requested.

Infrastructure Delivery Install Technician. Our Infrastructure team is responsible for day to day installation of servers and network equipment, structured cabling, project work and capacity management. This technician will also be involved with installation of structured cabling, management of infrastructure inventory levels, physical installation of network and server racks and/or devices.

This position requires the successful candidate report to a site location. You will work in a dynamic environment to drive the stability and sustainability of our next-generation networks and assist in the development of innovative ways to automate and scale our network. You will launch cutting edge server technologies and solve diverse networking impairments. You will quickly and accurately assess a wide range of infrastructure issues, which requires a good understanding of computers, servers, switches and various networking devices from both a hardware and software perspective and a demonstrated willingness to learn and apply new technology. To be successful in this role you should possess technical aptitude, written and oral communications skills and the ability to deal effectively with people in a wide variety of situations. In addition, you must possess strong analytical skills with demonstrated problem solving ability. You will be able to leverage your experience exercising high levels of initiative, judgment, and diplomacy.

Experience Level

Entry Level

This is a Contract position based out of New Carlisle, IN.

The pay range for this position is $22.00 - $22.00/hr.

Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in New Carlisle,IN.

This position is anticipated to close on Mar 20, 2026.

We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

• This position requires an active DoD Clearance (Secret, Top Secret, Top Secret/SCI) or the ability to be obtain an (Interim Secret, Interim Top Secret)

• Because an active or interim DoD clearance is required, U.S. Citizenship is required 

Job Description

Responsibilities

• This technician will support a large federal agency's Network Infrastructure through survey, design, and deployment of structured networks and will be responsible for the upkeep of the security posture of the environment
• This is accomplished through projects such as new installations, life cycle replacement projects, Cable Plant and wireless installations that are compliant with commercial, TEMPEST, and NIST standards
• Lead network survey, design and installations under direction of the government
• analyze, test, troubleshoot, and evaluate existing network systems, such as local area networks (LAN), wide area networks (WAN), cloud networks, servers, and other data communications networks.
• Perform network maintenance to ensure networks operate correctly with minimal interruption.
• Knowledge of DISA network topologies and standards
• Topology and rack elevations using Visio
• Create detailed Site Survey reports detailing a site's current infrastructure, NIST and TEMPEST compliance, along with design recommendations
• Configure, install, test, certify, and troubleshoot network infrastructure cabling
• Ensure Network cabling infrastructure is compliant with current NIST and TEMPEST Standards
• Build and install equipment racks
• Install, dress, label, and terminate Cat6 and Fiber cable in telecommunications rooms
• Test and troubleshoot network infrastructure issues on SIPR and NIPR networks
• Create accurate reports and documentation to design/certify network infrastructure
• Track, manage, and ensure project tasks are completed in a timely manner
• Develop Bills of Material (BOM) for network plant design requirements
• Plan and perform preventive maintenance and scheduled upgrades (Life-cycle replacements)
• Investigate physical faults in the network
• Report network infrastructure deployment status to key stakeholders

Qualifications

• Must hold an active Secret security clearance
• (US Citizenship required)
• Security + Certification 

Additional Requirements:

• Organizes and directs network installations on site surveys.
• Assesses and documents current site network configuration and user requirements.
• Designs and optimizes network topologies.
• Directs and leads preparation of engineering plans and site installation Technical Design Packages.
• Develops installation schedules.
• Mobilizes network installation team.
• Directs and leads preparation of drawings documenting configuration changes at each site.
• Prepares site installation and test reports.
• Coordinates post installation operations and maintenance support.

Skills

Network engineering, Router, Firewall, Troubleshooting, Infrastructure, Ccna

Top Skills Details

Network engineering,Router,Firewall,Troubleshooting,Infrastructure,Ccna

Additional Skills & Qualifications

In addition to standard installer skillsets, candidates should possess the following:

• Cable installation and termination (fiber and copper)

• Rack and stack of network equipment

• Basic troubleshooting and testing of network connections

• Ability to read and follow network diagrams and installation plans

• Familiarity with structured cabling standards and labeling

Candidates with networking certifications (e.g., Network+, CCNA, Aruba, Versa) will be preferred.

Experience Level

Expert Level

This is a Contract position based out of Fort Meade, MD.

The pay range for this position is $39.00 - $40.00/hr.

Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in Fort Meade,MD.

This position is anticipated to close on Mar 24, 2026.

We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

• Reviews and documents customer requirements and designs products in compliance with stated requirements, focusing on ease of manufacturing with high reliability.
• Develop prototypes, oversee testing/qualification, and ensure compliance with industry and customer performance standards.
• Partner with Manufacturing to address cost reduction, quality improvement, and customer issue resolution.
• Stay current with technological trends and emerging interconnect solutions including power interconnect innovations to guide future product development.
• Checks and/ or approves engineering drawings, parts lists, and test sheets
• Ensures all ECNs are processed efficiently, effectively, and consistently.
• Correspondence with customers and suppliers as needed to ensure customer satisfaction is maintained
  

• Bachelor's degree in mechanical engineering, Electrical Engineering, or a related technical field.
• 3+ years of experience in connector and/or cable assembly design and development.
• Strong analytical, problem-solving, and design skills.
• Excellent communication and interpersonal skills with the ability to collaborate across global teams.
• Proficiency in 3D modeling tools (e.g., Creo) and Product Data Management systems (e.g., Windchill) preferred.
• Proficient in using DFMEA to evaluate and mitigate risks in mechanical assemblies and design analyses.
  

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a Industrial Maintenance Electrician you will be a vital part of our manufacturing team installing, maintaining electrical equipment. Operate, install electrical systems and preform functional of building and plant equipment.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Operate, install electrical systems and perform functional testing of building and plant equipment (e.g., machines, motor controls, room re-models)

• Determine if system should be shut down or work must be performed with power source on

• Lock out, tag out, try out equipment and related systems

• Perform primary and secondary testing on electrical breakers during routine maintenance; replace, update and retro fit breakers

• Perform routine tests on high voltage switches and relays, using hi-potential test equipment (Hipot), replace switch or relay

• Troubleshoot electric motors using appropriate test equipment

• Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system

• Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel

• Service and maintain electrical systems on various types of overhead cranes

• Operate, install electrical systems and perform functional test of building and plant equipment (e.g., machines, motor controls, room re-models)

• Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent, halide, standard); clean and check sockets, and replace ballast and bulbs

• Run high voltage electrical cable from sub-station to unit station; cut and splice cable, test cable for resistance

• Install, replace and repair fiber optic cable for computers and computing systems

• Bend conduit and install junction boxes; pull wire of various gauge and color through conduit using a fish tape; install and connect switches and outlets

• Check work after completion or after each operation; ensure job is per drawing and WAC, NEC codes; evaluate job for work to be performed (e.g., wire size, electrical load, conduit)

• Operate mechanical lifts of various types (e.g. tiger lift, spider lift, snorkel lift), to access work areas

• Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in plant electrical systems

• Establish/verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters)

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 3+ years of experience as an Electrician or Apprentice.

• 1+ years of experience maintaining industrial equipment.

• Experience working from heights and using fall protection equipment with weight limitations .

• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

• Must be able to complete fall protection training.

Preferred Qualifications:

• Electrician license (EL01 &/or EL 07) or an electrical card.

• Crane related experience.

• Experience with prime power.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidate must live in the immediate are or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $33.32 per hour – $61.01 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

How You'll Contribute:

The installation technician is responsible for performing a wide variety of installation duties on technology projects for our clients. This position is the key field position for the bulk of the actual work that gets done in our clients buildings. The install tech needs to coordinate with project management, field superintendents and others to fully understand their role on specific projects. They interpret our drawing packages to create the basis of the finished systems. This installation can include displays, projectors, loudspeakers, microphones, equipment racks, etc. Will also provide advice and guidance to Associate Installation Technicians as necessary.

Location: Must live in the Washington DC - VA area.

What You'll Do:

• 
  
  
• Perform structured cabling installation: pull, terminate, label, and dress cables per project documentation and standards.
  
  
• Complete physical installation and wiring of AV devices (displays, speakers, microphones, cameras, control interfaces, etc.).
  
  
• Assemble, populate, and dress equipment racks with a high degree of workmanship and adherence to design documents.
  
  
• Solder and terminate connectors according to project specifications and accepted industry practices.
  
  
• Execute light physical construction tasks as required (e.g., blocking, mounting surfaces, hardware installation).
  
  
• Follow Diversified's installation procedures, quality guidelines, and safety protocols with minimal deviation.
  
  
• Maintain accurate daily records: timesheets, daily field reports, checklists, and as-built documentation.
  
  
• Collaborate effectively with Project Managers, Engineers, and Lead Technicians to ensure project milestones are met.
  
  
• Represent Diversified professionally on active job sites, including client and construction environments.
  
  
• Actively participate in ongoing training and skill development toward advancing technical proficiency.
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients job sites with little supervision. On smaller projects this position may be responsible for the coordination with clients, contractors and subcontractors.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general the project manager and a site supervisor are available to answer questions. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to mobile around the construction site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 40 pounds in construction areas. The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis.

What You'll Bring:

Education/ Certifications:

* High school or GED equal
* AVIXA CTS Certification is desired.
* Must have a valid drivers license and adhere to our insurance requirements
* OSHA 30 Certificate is highly desired. (NYC OSHA30 is desired)
* Other relevant certifications may be required or preferred based on the technology focus of the position.

Required Skills/Qualifications:

• 
  
  
• 1+ years as an associate technician and/or fabrication technician or related industry experience.
  
  
• Proven ability to perform core AV installation tasks with minimal direct instruction.
  
  
• Competency with hand tools, power tools, and installation materials required for AV integration.
  
  
• Strong understanding of cabling types, termination techniques, and device mounting requirements.
  
  
• Ability to interpret functional design drawings, cable riser diagrams, and architectural drawings.
  
  
• Comfortable working on ladders, lifts, and in construction environments.
  
  
• Strong work ethic, attention to detail, and commitment to quality workmanship.
  
  
• Effective communication skills and ability to collaborate within a project team.
  
  
• Flexibility and adaptability to evolving site conditions and project priorities.
  
  

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

• 
  
• Troubleshoots and resolves malfunctions to machine control systems and makes recommendations to improve efficiency or address quality concerns
  
• Experience and proficiency with ladder logic/PLC programming, Siemens experience required
  
• Develops new and modifies existing PLC and/or HMI applications, interfaces, or embedded control systems
  
• Participates in the set-up and commissioning of new systems or the upgrading of current systems
  
• Knowledge of AC and DC circuitry and electrical concepts
  
• Versatile in ladder logic and various PLC programming languages. Working knowledge of field control devices (motors, relays, switches, photoeyes, etc.)
  
• Designs, develops, maintains, and modifies instrumentation and control systems
  
• Start to finish electrical control system hardware design experience (control panel and field wiring)
  
• Competency in Electrical CAD
  
• Ability to work independently as well as in a team environment
  

• 
  
• Working knowledge of power distribution, networks, PLC, HMI, and drive hardware and software
  
• Ability to read and create schematic drawings using AutoCAD software
  
• Must be able to communicate effectively with Operators, Technicians, Management,a nd others
  
• Ability to work independently as well as in a team environment
  
• Must possess a sense of urgency and ownership when working within time constraints
  
• Must have strong computer skills and be proficient in Microsoft Word and Excel
  

• 
  
• Action Oriented
  
• Balances Stakeholders
  
• Collaborates
  
• Customer Focus
  
• Nimble Learning
  
• Plans and Aligns
  

• 
  
• 401k with Matching
  
• Family and Individual Insurance Packages (Health, Life, Dental, and Vision)
  
• Paid Time Off & Paid Holidays
  
• Long & Short-Term Disability
  
• Supplemental Insurance Plans
  
• Employee Assistance Program
  
• Employee Referral Program
  
• Tuition Reimbursement Programs
  
• Advancement & Professional Growth opportunities
  
• Parental Leave
  
• & More