Basic Level Excel Test Jobs in Usa

Job Title: Electrical Test Engineer - Three Phase and motor

Location: Charlotte, NC

Job Description

This role is responsible for the validation and certification of commercial chiller systems. The position focuses on electrical system design evaluation, instrumentation, test execution, data analysis, and compliance with applicable industry standards. Engineers will work closely with mechanical engineers, lab technicians, and quality teams to ensure chiller performance, safety, and reliability.

Key Responsibilities

· Maintain all electrical systems fully functional to test HVAC systems (water-cooled and air-cooled chillers)

· Plan, execute, and support electrical testing of commercial chillers, including air-cooled and water-cooled systems

· Troubleshoot control circuits and low-voltage wiring on water-cooled and air-cooled chillers

· Develop and review electrical test procedures, wiring diagrams, and control schematics

· Set up and validate test instrumentation for voltage, current, power, harmonic distortion, and control signals

· Troubleshoot electrical, controls, and communication issues during system testing

· Analyze test data and prepare technical reports documenting results, issues, and corrective actions

· Support compliance testing to applicable standards (e.g., UL, IEC, AHRI, ASHRAE)

· Collaborate with design engineering teams to identify root causes and recommend design improvements

· Support factory acceptance testing (FAT), qualification testing, and reliability testing

· Ensure testing activities comply with lab safety procedures and electrical safety requirements

· Provide technical support during audits, certifications, and customer witness testing

Required Qualifications

· Bachelor’s degree in Electrical Engineering or related field

· 3–7 years of experience in electrical testing, validation, or product development (HVAC or industrial equipment preferred)

· Strong understanding of three-phase power systems, motor drives, starters, and VFDs

· Experience with electrical test equipment (power analyzers, oscilloscopes, multimeters, data acquisition systems)

· Knowledge of control systems, PLCs, sensors, and communication protocols (Modbus, BACnet, CAN, etc.)

· Ability to read and interpret electrical schematics and wiring diagrams

· Strong troubleshooting and problem-solving skills

· Proficiency in technical documentation and test reporting

· Familiarity with lab safety standards and electrical codes (NFPA 70 / NEC)

Preferred Qualifications

· Experience with commercial chillers, large HVAC equipment, or refrigeration systems

· Familiarity with industry standards such as ASHRAE 90.1, AHRI 550/590, UL 1995, IEC 60335

· Experience working in an engineering laboratory or test environment

· Knowledge of energy efficiency testing and performance certification

· Experience with automated test systems and data analysis tools (LabVIEW, Python, MATLAB, or similar)

· Professional Engineer (PE) license or EIT certification

Key Competencies

· Primarily laboratory-based role with exposure to high-voltage equipment and rotating machinery

· Occasional extended hours during test execution or customer witness testing

· Strict adherence to safety protocols and PPE requirements

Electrical Test Engineer – Commercial Chiller Systems

Location: Charlotte NC

Job Type: Full time

Job Description

This role is responsible for the validation and certification of commercial chiller systems. The position focuses on electrical system design evaluation, instrumentation, test execution, data analysis, and compliance with applicable industry standards. Engineers will work closely with mechanical engineers, lab technicians, and quality teams to ensure chiller performance, safety, and reliability.

Key Responsibilities :

· Maintain all electrical systems fully functional to test HVAC systems (water-cooled and air-cooled chillers)

· Plan, execute, and support electrical testing of commercial chillers, including air-cooled and water-cooled systems

· Troubleshoot control circuits and low-voltage wiring on water-cooled and air-cooled chillers

· Develop and review electrical test procedures, wiring diagrams, and control schematics

· Set up and validate test instrumentation for voltage, current, power, harmonic distortion, and control signals

· Troubleshoot electrical, controls, and communication issues during system testing

· Analyze test data and prepare technical reports documenting results, issues, and corrective actions

· Support compliance testing to applicable standards (e.g., UL, IEC, AHRI, ASHRAE)

· Collaborate with design engineering teams to identify root causes and recommend design improvements

· Support factory acceptance testing (FAT), qualification testing, and reliability testing

· Ensure testing activities comply with lab safety procedures and electrical safety requirements

· Provide technical support during audits, certifications, and customer witness testing

Required Qualifications:

· Bachelor’s degree in Electrical Engineering or related field

· 3–7 years of experience in electrical testing, validation, or product development (HVAC or industrial equipment preferred)

· Strong understanding of three-phase power systems, motor drives, starters, and VFDs

· Experience with electrical test equipment (power analyzers, oscilloscopes, multimeters, data acquisition systems)

· Knowledge of control systems, PLCs, sensors, and communication protocols (Modbus, BACnet, CAN, etc.)

· Ability to read and interpret electrical schematics and wiring diagrams

· Strong troubleshooting and problem-solving skills

· Proficiency in technical documentation and test reporting

· Familiarity with lab safety standards and electrical codes (NFPA 70 / NEC)

Preferred Qualifications

· Experience with commercial chillers, large HVAC equipment, or refrigeration systems

· Familiarity with industry standards such as ASHRAE 90.1, AHRI 550/590, UL 1995, IEC 60335

· Experience working in an engineering laboratory or test environment

· Knowledge of energy efficiency testing and performance certification

· Experience with automated test systems and data analysis tools (LabVIEW, Python, MATLAB, or similar)

· Professional Engineer (PE) license or EIT certification

Key Competencies :

· Primarily laboratory-based role with exposure to high-voltage equipment and rotating machinery

· Occasional extended hours during test execution or customer witness testing

· Strict adherence to safety protocols and PPE requirements

**Be visionary**

Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.?

We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins.

**Job Description**

We are seeking a dynamic **Sales Engineer (SE)** to drive business growth for our **Ethernet Test and Analysis Solutions** in the Americas. This individual will be responsible for identifying, developing, and closing sales opportunities for Teledyne LeCroy's **Xena** and **SierraNet** product lines within data center, semiconductor, and networking equipment markets.

The ideal candidate is a technically strong, customer-focused professional with a proven track record selling **Ethernet, Layer 1-3 test, or network analysis equipment** . You'll collaborate closely with Field Application Engineers, Product Management, and global Sales Leadership to meet revenue goals and strengthen strategic customer relationships.

**Key Responsibilities**

+ Develop and execute strategic account plans to achieve sales targets within assigned territory.

+ Engage with design, validation, and test engineering teams at leading semiconductor, system, and network OEMs.

+ Present and demonstrate Teledyne LeCroy's Xena traffic generators, Chimera impairment emulators, and SierraNet analyzers to both technical and executive audiences.

+ Manage the full sales cycle - from lead qualification and technical proof-of-concept to quotation, negotiation, and close.

+ Collaborate with inside sales and marketing teams to build pipeline and drive regional campaigns.

+ Provide customer feedback to Product Management for roadmap alignment and feature prioritization.

+ Represent Teledyne LeCroy at industry events, conferences, and technical workshops.

**Required Qualifications**

+ **Bachelor's degree** in Electrical Engineering, Computer Engineering, or related technical field.

+ **5+ years of experience** in technical sales or applications engineering within the **test & measurement** or **network equipment** industry.

+ Proven experience selling **Ethernet, Layer 1-3 test equipment, BERTs, traffic generators, or analyzers** (e.g., Keysight, Viavi, Spirent, EXFO, etc.).

+ Strong understanding of **Ethernet protocols, PHY/SerDes, and Layer 1-3 technologies** (100G, 400G, 800G, 1.6T).

+ Ability to engage both technically and strategically with engineers, managers, and executives.

+ Excellent communication, presentation, and interpersonal skills.

+ Self-motivated and organized, with the ability to work independently in a regional role.

**Preferred Qualifications**

+ Familiarity with **CMIS, RS-FEC, PAM4, AN/LT, or coherent optics** test methodologies.

+ Existing relationships with key accounts in the **San Francisco** **Bay Area semiconductor or networking ecosystem** .

+ Experience with CRM tools (Dynamics 365 or Salesforce).

**Why Join Us**

+ Be part of a global leader shaping next-generation Ethernet and protocol test technologies.

+ Work with cutting-edge solutions supporting 400G-1.6T, coherent optics, and advanced network architectures.

+ Competitive base salary, uncapped commission, and comprehensive benefits.

+ Collaborative culture with global technical and sales support.

**Salary Range:**

$150,400.00-$200,500.000

**Pay Transparency**

The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position.

Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions.

Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. ?

You may not realize it, but Teledyne enables many of the products and services you use every day **.**

Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Defense, Space & Security (BDS), is seeking a Senior Avionics Hardware Engineer - Fighters Mission Systems (Level 5)in Berkeley, MO.

BDS is a global leader in the development, production, maintenance and enhancement of fixed-wing and rotary wing aircraft, commercial and government satellites, human spaceflight programs and weapons. Key markets include aeronautics, space and weapons. Core capabilities are in development, production and mission enabling upgrades of integrated solutions. BDS delivers the most digitally advanced, simply and efficiently produced and intelligently supported solutions to its customers.

Position Responsibilities:

• Overall subject matter expert and technical lead engineer for the Mission Computers and Stores Management hardware for requirements development, avionics subsystem and system design, integration, subsystem/system/flight test, system verification, production/fielding, and supplier oversight
• Lead the hardware supplier design team in supporting all Tactical Fighters program needs
• Develop interface control documents describing mechanical, electrical, and software interfaces
• Perform technical problem investigation and resolution at subsystem, system, and platform integration levelsPerform weapon capability development, implementation, and integration onto a fighters platform
• Out brief status to internal Boeing stakeholders/leadership and external customers
• Support subsystem testing on the Mission Systems Hardware
• Support system testing in ESIL and during Flight Test
• Support SCFTA efforts for the Mission Systems Hardware
• Support airworthiness efforts for hardware design, development and implementation

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position requires the ability to obtain a U.S. Secret Security Clearance for which the U.S. Government requires U.S. Citizenship.

• An interim and/or final U.S. Secret Clearance Post-Start is required.

Ability to obtain and maintain Special Access Program (SAP) clearance

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry

• (Level 5) 14+ years of work related engineering experience with a Bachelor's or 12+ years of work related engineering experience with a Master's or 9+ years of work related engineering experience with a PhD

Preferred Qualifications (Desired Skills/Experience):

• Active U.S. Secret Security Clearance
• Previous experience working on tactical fighters program
• Previous experience designing, verifying and fielding avionics subsystems
• Experience leading teams and mentoring engineering peers
• Circuit card and backplane design and integration

Conflict of Interest: Successful candidates for this job must satisfy Company's Conflict of Interest (COI) assessment process.

Typical Education/Experience:

Leve 5: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Relocation:

This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range (Level 5): $154,700 - 209,300

Boeing offers the best benefits in Aerospace:

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Applications for this position will be accepted until Mar. 26, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Manufacturing Test Software Engineer

Salary: $125,000 – $150,000 + equity & benefits

Location: Mission District, San Francisco, CA

We’re looking for a self-motivated Manufacturing Test Software Engineer to join our R&D/Pilot test team in San Francisco. You’ll work closely with R&D and Operations to improve test systems, processes, and production readiness for LiDAR products.

Key Responsibilities

• Maintain, enhance, and deploy test systems and automation platforms
• Drive improvements in test efficiency, yield, and product quality
• Analyze root causes of failures and implement corrective actions using tools such as 8D, 5 Whys, and Fishbone analysis
• Support scalability and manufacturability projects
• Prepare technical documentation and train test operators

Required Skills & Experience

• Strong Python programming and debugging skills
• Experience with test automation in manufacturing environments
• Familiarity with source control tools (Git, Jira, etc.) and quality standards (SPC, GR&R, control charts)
• Experience with LiDAR, robotics, vision systems (Cognex/OpenCV), or test measurement equipment is a plus
• Bachelor’s degree in Computer Science, Engineering, or equivalent experience
• 10+ years supporting product tests in manufacturing

Exciting opportunity! We’re seeking an experienced electrical test technician to join a growing team in Coon Rapids, MN. In this role, you'll perform hands-on electrical testing and troubleshooting of switchgear, relays, and power systems. This is a union position offering excellent benefits, a stable work environment, and opportunities for advancement.

Location: Coon Rapids, MN

Wage: $38.00 – $44.00 per hour

Hours: Monday – Friday, 7:00 am – 5:00 pm

Benefits of the electrical test technician:

• Union role with scheduled pay increases
• Medical, dental, vision, life, disability, and critical illness coverage
• 401(k) with company match
• Three weeks of PTO in your first year
• Opportunities for overtime
• Career advancement paths
• Modern, climate-controlled facility
• Newer, well-maintained equipment
• Company events and a positive work environment
• No history of layoffs – enjoy job stability!

Duties of the electrical test technician:

• Perform testing of electrical equipment, switchgear, and 3-phase power systems
• Conduct factory witness testing
• Assist with redline and schematic updates
• Test relays, circuit breakers, ATS's
• Document test results accurately
• Maintain up-to-date knowledge of electrical codes and safety standards

Requirements of the electrical test technician:

• 2+ years of experience testing electrical equipment and systems
• Ability to read schematics and blueprints
• Understanding of electrical theory, controls, and low/medium voltage systems
• Experience with PLC/HMI preferred, but not required
• Diesel generator power control experience a plus

Additional Information:

Apply today! To learn more about this electrical test technician position, contact Matt at 763-571-7077.

EOE: Twin City Staffing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Title: Test Lead

Location: Mountain View, CA

Job Type: Full-Time

Job Description:

Qualification: B. Tech/MTech (Electronics & Communication Engineering)

1) Min 10 yrs experience in Automotive test development and testing with min 2 yrs in the infotainment and/or telematics domain

2) Test automation and testing of IVI interfaces at least 2 of the following: Serialize-based high-resolution Displays, Ethernet, Tuner, Wi-Fi, BT, V2X, LTE, GNSS, and Audio.

3) DVP&R preparation, DV testing

Skills:

1) Min 10 yrs experience in Automotive test development and testing with min 2 yrs in the infotainment and/or telematics domain

2) Test automation and testing of IVI interfaces of at least 2 of the following: serialize-based high resolution Displays, Ethernet, Tuner, Wi-Fi, BT, V2X, LTE, GNSS, and audio

3) DVP&R preparation, DV testing

Minimum Qualifications

1-3 years of experience (or equivalent projects/internships)

Python experience — scripting, automation, basic data processing

Experience with Linux environments (command line, SSH, basic system administration)

Willingness to work hands-on with physical hardware

Strong debugging instincts — you dig until you find the root cause

Nice to Have

Experience working with Android devices (ADB, logcat, shell commands)

Familiarity with 6DoF robots

Experience with modern C++

Experience with VR/AR devices or embedded systems

Version control with Git / Buck / Mercurial

W2 and Locals only, in-person client interview

Job Title- Automation Test Engineer

Location- Hybrid in Alpharetta, GA or NYC, NY

Rate : $33/hr.w2

Years of Experience: 5-7 Years

What are the top 3 skills required for this role?

1. Strong JAVA SDET (API & UI Automation)

2. Mobile automation (Appium)

3. Very good communication skills

Job Description/ Responsibilities/ Years of experience:

• 5 to 7 years of hands-on QA experience

• Expertise in Java programing language above Java8

• Practical experience with Automation testing and coding skills in Core Java

• Practical knowledge of one UI & Mobile automation tool (Selenium, Appium etc.).

• Proficient in API Testing with any automation tool (Rest-Assured/HTTP Client).

• Strong SQL experience with various databases.

• Practical automation frameworks experience in Gherkins-Cucumber (BDD).

• Experience in Agile methodology and Devops with Integrating automated tests in Continuous Integration and Delivery pipeline.

• Good communication skills to work effectively in a global team.

• Self-motivated, problem solver.

• Willingness to learn and grow.

Roles & Responsibilities:

• Creation and execution of complex automated test scripts for testing business critical automation scripts using tools such as Java based Framework, Java, Selenium, Cucumber BDD, TestNG, Gradle and Jenkins.

• Need to possess Java development experience and have contributed towards the Framework creation/customization based on the requirements

• Test planning and Estimation of projects using TCP Estimation Methodology.

• Maintaining all project requirements and execution details on Test Management Tool JIRA. Reviewing Test Cases, Performing root cause analysis (RCA) for production defects.

• Perform failure analysis for mobile automation, scripts analyze and identify test cases feasible for automation.

• Sharing the Daily Status Report with project stakeholders and providing Go/No-Go decisions for production releases.

• Involved in Agile Process from attending Scrum Call, Backlog Grooming and Sprint Planning & Sprint Retrospective for all the deliverables