Engineering Jobs in Milpitas, CA

Job Requirements are as below:

Architect block and full-chip verification environments using HVLs and constrained random

techniques for SOCs with embedded CPUs and mixed signal interfaces. Requires UVM, System Verilog, SVA

○ Develop test plans and coverage metrics from specifications and write block and chip-level

tests in C,SV,UVM

○ Debug RTL and Gate simulations and work with design engineers to verify fixes.

○ Write diagnostics for validation of FPGA prototype (pre-tapeout) and ASIC.

○ Replicate silicon bugs in simulation environments and validate fixes or SW workarounds.

○ Convert verification tests to test patterns and assist Test Engineers on ATE vector bringup.

○ Evaluate latest verification methodologies and develop scripts etc. to automate verification

flows.

• Flash builds onto Yukon boards and OEM devices
• Configure UEFI, OS images, KDNET for debugging
• Enable crash dump collection and install SoC/GPU/platform drivers
• Develop and execute manual and automated tests (functional, stress, power, performance)
• Perform exploratory testing and identify corner-case scenarios
• Triage OEM/Internal bugs, collect logs/dumps, assist in debugging
• Prepare test reports and communicate execution status
• Collaborate with BSP, OEM QA, and automation teams
• Ensure CI/CD quality and OEM compliance readiness

Mechanical Engineer

We are an award-winning and innovative multi-disciplinary engineering consulting firm, has several openings for HVAC Engineers in our San Francisco CA. We work closely with architects and owners from around the world on large, complex projects with a focus on sustainability and energy performance of the built environment.

About the Job

Our Engineers work on high quality, high-profile, national and international projects. You will actively participate in the full project cycle, from the design phase through the final construction close-out. We offer excellent growth opportunities:

Many of our senior leaders started out as young engineers in our firm.

Responsibilities include

Design of air distribution systems

Design of hydronic systems

Specification writing

Scheduling and selecting major equipment

Automatic temperature controls system design and specification

Cooling/heating load calculations

Construction administration

Assist with Project Management

Attend client meetings

Requirements

• Bachelor's degree in Mechanical/HVAC Engineering
• 1-4 years experience designing mechanical systems for the built environment.
• Project experience submitted for consideration should include buildings on which you have actively participated in the project from the design phase through the final construction close-out.
• Experience of the design of HVAC systems and automatic temperature controls for a broad range of commercial systems.
• Strong working knowledge of building and energy codes
• Excellent verbal and written communication skills, with an emphasis on the ability to organize and present design information to clients.
• Special consideration will be given to those candidates who have successfully demonstrated innovative design experience specifically related to renewable energies and sustainable, high performing buildings.
• Revit experience is Highly preferred
• LEED AP is preferred

Full Benefits, 401K plan, Competitive salary, Vacation Package,

MAU is hiring a Sr. Manufacturing Trainer for our client in San Jose, CA. As a Sr. Manufacturing Trainer, you will develop and deliver technical training programs and materials to support manufacturing operations for eVTOL aircraft. This is a long-term renewable contract opportunity.

Benefits Package

• Pay of $60 - $65 per hour based on experience
• Health insurance
• Dental insurance
• Vision insurance

Shift Information

• Monday – Friday | 8:00 AM – 5:00 PM

Required Education and Experience

• Associate's degree or technical diploma from an accredited college or trade school in a related discipline, OR equivalent experience/combined education
• 5+ years of manufacturing or quality experience within Aerospace
• Experience developing technical training materials
• Experience conducting technical training in both classroom and hands-on environments
• Experience conducting instructor-led training
• Working knowledge of ISO9001/AS9100 and FAA standards and requirements

Preferred Education and Experience

• Experience utilizing or interfacing with NX/Teamcenter
• Intermediate knowledge and experience of various operation software and the Google suite
• Experience in prepreg and wet layup composite sandwich repair, preparation, bagging, and curing
• Experience working with a Manufacturing Execution System (MES) and executing work instructions

General Requirements

• Candidate must be authorized to work in the US on a continuous basis without company sponsorship
• Excellent oral and written communication skills
• Strong bias for action with the ability to clearly communicate vision and drive change
• Demonstrated ability to work effectively with teams, including virtual teams, as well as independently or with minimal supervision
• Demonstrated ability to meet deadlines and quality standards

Essential Functions

• Develop training programs, curriculum, training materials, training labs, and other training products for manufacturing eVTOL aircraft
• Identify optimal approaches to training requirements, including hardware, lab space, job aids, videos, course assessments, computer-assisted and adaptive learning environments, testing, behavior-based assessments, and performance measurement
• Create assessments to evaluate learning effectiveness and identify instructional improvement opportunities, including pre-tests, post-tests, and knowledge checks
• Adapt and present material to various knowledge levels using strong written and verbal communication skills
• Attend additional courses, study course material, complete hands-on exercises, and pass a technical check performed by a qualified instructor to increase course qualification levels
• Acquire subject knowledge by collaborating with engineers, observing production methods, referencing industry-standard technical specifications, engineering drawings, models, and schematics
• Participate in project team meetings and meet deadlines as determined by the project schedule

MAU Workforce Solutions is an innovative global company with extensive experience providing solutions for success in staffing, recruiting, technology and outsourcing to our clients, employees, and applicants. Headquartered in Augusta, GA since 1973, MAU is a family and minority-owned company offering better processes and better people to create efficiencies and greater profits for our clients. Our relationships with world-class companies, our training programs and our culture of family allow MAU to offer better results, better jobs, and better lives to those who work with us.

All Applicants must submit to background check and drug screening

Disclaimer: This job description is not designed to be a complete list of all duties and responsibilities required of the position

EOE

Job Title: QA Engineer

Location: Santa Clara, CA

Employment Type: Full-Time

Role Overview

We are seeking an experienced QA Engineer to support validation and quality assurance activities for consumer desktop platforms. This role is responsible for testing, issue analysis, and ensuring release readiness across internal and OEM configurations. The ideal candidate will have strong Windows BSP testing experience, hands-on debugging expertise, and prior exposure to OEM system validation.

The position requires close collaboration with BSP, OEM QA, and automation teams to ensure CI/CD quality compliance and timely issue resolution.

Key Responsibilities

Device Setup & Configuration

• Flash builds onto Yukon boards and OEM devices.
• Configure UEFI, OS images, and KDNET settings for debugging.
• Enable crash dump collection and install SoC, GPU, and platform drivers.

Testing & Validation

• Develop, execute, and maintain manual and automated test cases.
• Perform functional, stress, power, and performance testing on internal and OEM devices.
• Conduct exploratory testing to identify corner-case scenarios (expertise in one or more subsystems preferred).
• Validate power states, hibernate cycles, and Modern Standby functionality.
• Support certification readiness activities including USB4 and DP tunneling validation.

Debugging & Issue Management

• Triage internal and OEM defects; track reproducibility and resolution status.
• Collect logs, crash dumps, and perform root cause analysis.
• Utilize debugging tools such as WinDbg and KDNET.
• Perform memory debugging and analyze system-level issues.

CI/CD & Reporting

• Ensure quality and compliance of BSP builds within CI/CD pipelines.
• Upload and document test results accurately.
• Prepare detailed test execution reports and communicate findings to stakeholders.
• Support build readiness and release validation processes.

Collaboration

• Work closely with BSP, OEM QA, and automation teams.
• Coordinate with internal and external stakeholders for validation and issue resolution.

Required Skills & Qualifications

• 5–8 years of experience in Windows-based QA and BSP validation.
• Strong hands-on experience with Windows BSP testing and platform setup.
• Experience with UEFI flashing, KDNET debugging, and crash dump analysis.
• Proficiency in bug triage, log analysis, and defect reporting tools.
• Solid understanding of power management states, hibernate cycles, and Modern Standby.
• Experience with OEM device validation and system-level testing.
• Familiarity with CI/CD pipelines for BSP builds and QA automation.
• Experience with Intel and AMD platforms.
• Knowledge of USB4, DP tunneling, and certification readiness tasks.
• CUDA knowledge is preferred.

About the Company

An early-stage AI research lab focused on interpretability, alignment, and reinforcement learning is hiring a Research Engineer. Founded by former frontier-model researchers, the team works directly on model internals and training dynamics to better understand how AI systems reason. The lab runs fast experimental research cycles, building custom tools to explore open-ended questions about model behavior.

About the Role

This role focuses on building the experimental tooling that enables interpretability research. You will develop systems that allow researchers to inspect, measure, and manipulate internal model representations. This is not a production ML or MLOps role — it's for engineers who enjoy building new experimental systems from scratch and working closely with researchers.

Responsibilities

• Build custom RL-style environments and experimental testbeds for interpretability research
• Develop tools for activation tracing and mechanistic interpretability
• Implement probes to detect latent concepts (e.g., deception, goals, uncertainty)
• Prototype activation-level steering methods beyond prompting or fine-tuning
• Collaborate with researchers to rapidly iterate on experiments and tooling

Qualifications

• Strong programming skills in Python
• Experience with ML frameworks such as PyTorch or JAX
• Experience working with deep learning models or LLMs
• Strong software engineering fundamentals and ability to build experimental ML systems

Preferred Skills

• Experience in mechanistic interpretability or alignment research
• Familiarity with reinforcement learning environments
• Background working with model internals, representations, or probing methods
• Research experience (PhD preferred but not required)

Pay range and compensation package

Competitive salary, equity, and benefits.

Job Title: Film Engineer/ Optical Coating Process Engineer

Location: Sunnyvale, CA/Redmond, WA

Duration: 12 Months

Summary

The Client brings together a world-class team of researchers, developers, and engineers to create the future of virtual and augmented reality, which together will become as universal and essential as smartphones and personal computers are today. And just as personal computers have done over the past 45 years, AR and VR will ultimately change everything about how we work, play, and connect.

We are developing all the technologies needed to enable breakthrough AR glasses and VR headsets, including optics and displays, computer vision, audio, graphics, brain-computer interface, haptic interaction, eye/hand/face/body tracking, perception science, and true telepresence. Some of those will advance much faster than others, but they all need to happen to enable AR and VR that are so compelling that they become an integral part of our lives.

Responsibilities

• Lead the development and optimization of optical coating processes, including Anti-Reflective (AR), hardcoat, and photochromic coatings, to meet performance, reliability, and manufacturability requirements.
• Collaborate closely with external vendors and contract manufacturers to drive process development, conduct failure analysis, and implement effective corrective actions for coating-related issues.
• Drive Design for Manufacturability (DFM) and Process Failure Mode and Effects Analysis (PFMEA) activities to identify and mitigate risks in the coating manufacturing process.
• Own the end-to-end process control plan, from material selection and incoming quality control to in-process monitoring and final inspection, ensuring a stable and high-yield production environment.
• Define, validate, and implement metrology and characterization techniques to ensure coating performance and quality, correlating measurements to visual and functional performance.

Minimum Qualifications

• Has a BS degree in Materials Science, Chemical Engineering, Optical Science, Physics, or a relevant technical field.
• 3+ years of experience in optical coating process engineering, with hands-on experience in deposition technologies such as PVD, IAD, or PECVD for anti-reflective and hardcoat applications.
• Demonstrated experience working with external vendors and contract manufacturers, including process transfer, qualification, and sustaining support.
• In-depth knowledge of coating characterization techniques, including spectrophotometry, ellipsometry, environmental testing, and mechanical durability testing (e.g., adhesion, abrasion).
• Experience with statistical process control (SPC), design of experiments (DOE), and structured problem-solving methodologies.
• Must obtain work authorization in the country of employment at the time of hire and maintain ongoing work authorization during employment.

Preferred Qualifications

• Advanced degree (MS or PhD) in a relevant technical field.
• Experience with the design, process, and metrology of photochromic coatings.
• Proven track record of launching products in a high-volume manufacturing environment.Familiarity with thin-film design principles and software (e.g., OptiLayer, FilmStar, Macleod).
• Experience in failure analysis techniques to determine root cause of coating defects and failures.
• Excellent project management and communication skills, with the ability to work effectively in a cross-functional and multicultural team environment.

Industry: Hybrid-Electric Aerospace / Advanced Aviation

Location: San Jose

About:

This role sits within a clean-sheet propulsion and vehicle integration programme based in California.

It is not a minor modification effort. The team is rethinking propulsion architecture at aircraft level, including generator integration, high-power electronics, energy distribution, and advanced thermal management, layered onto an existing aircraft platform.

The programme also carries a defence-focused dimension, with applications spanning ISR, distributed operations, and mission-adaptable configurations. Technically, this is a multidisciplinary systems integration challenge suited to engineers who want ownership at vehicle level rather than remaining at isolated component level.

Responsibilities:

• Lead the design of structural elements and oversee propulsion system integration on full-scale prototype aircraft
• Develop detailed metallic components and assemblies supporting propulsion attachment, structural interfaces, and overall system integration
• Take ownership of the end-to-end prototype lifecycle including requirements definition, design, BOM creation, sourcing, assembly, and validation
• Carry out structural calculations and hand analyses to validate load paths, safety margins, and interface performance
• Perform finite element analysis on metallic structures and mounting systems to ensure design robustness
• Engage with external suppliers to evaluate and select suitable COTS hardware such as mounts, brackets, and fastening solutions
• Define and execute verification and validation test strategies, ensuring designs are proven through rigorous testing
• Produce and review detailed engineering drawings, specifications, and technical documentation
• Contribute to requirements capture, development, and traceability documentation
• Manage supply chain activities and drive procurement efforts for owned hardware
• Work closely with cross-functional engineering teams across multiple disciplines

Required Experience & Skills:

• 5–15 years of relevant engineering experience
• Bachelor's degree in Mechanical Engineering or related discipline
• Experience integrating and/or designing flight-critical hardware attached to primary aircraft structure
• Strong proficiency in CAD tools such as NX or SolidWorks, with NX preferred
• Experience managing large CAD assemblies within PLM environments such as Teamcenter
• Solid understanding of load analysis, free body diagrams, and FEA methodologies
• Demonstrated experience designing complex metallic components and welded assemblies
• Strong knowledge of GD&T and creation of manufacturing-ready drawings
• Familiarity with aerospace hardware specifications and standards
• Hands-on engineering experience across multiple technical domains, particularly metallic and composite structures
• Clear and effective communication skills

Desirable / Additional Qualifications:

• Degree in Aerospace, Mechanical, Electrical Engineering, or equivalent technical field
• Experience working with electric propulsion, powertrain systems, or broader aerospace systems
• Strong understanding of full product development cycles including design phases, manufacturing, and global supply chain coordination
• Experience using tools such as Jira and Confluence for project tracking and documentation
• Background supporting vehicle development from early prototype phases through certification and production
• Familiarity with Part 23 certification requirements and/or ARP4754A processes

About Nucleus

Nucleus is a research-driven talent and intelligence platform for the next generation of investors, built at the intersection of data, experimentation, and community. We hire investors for some of the best firms in the world and are building the network, community, and intelligence layer around the people shaping the future of venture and company building.

The Role

This is a foundational hire working directly with the founder across research, community, events, client relationships, fellow experience, and search execution. One day you may be building cap tables. Another you may be running a mixer for 40 fellows or sitting in on a GP hiring conversation at a top firm.

The title is intentional. You will be in the room early, learning how the best firms operate and earning responsibility as you prove you can carry it. Over time you will own projects and workstreams. The starting point is proximity, pattern recognition, and high output across a wide surface area.

The founder focuses on strategy, vision, brand, community, and high-trust client relationships. Your role is to absorb the operational surface area so his time goes to the work only he can do. Nothing drops while he goes deep.

What the work looks like

• Work side by side with the founder across research, community, content, events, and client delivery
• Own the operational follow-through: prep materials, follow-ups, scheduling, and keeping workstreams moving between meetings
• Conduct research on investors and firms. Build and maintain the Nucleus Brain so the founder can go deeper on priority engagements.
• Collaborate on candidate shortlists and search materials for active client work
• Help coordinate NEXT Fellowship programming, pod logistics, and fellow experience
• Plan and execute community events: mixers, firesides, dinners, partner programming
• Draft and edit external communications: emails, proposals, partnership materials, client decks • Contribute to content across Nucleus Intelligence, Substack, social, and the Rise podcast
• Help shape brand and media presence
• Pick up whatever needs to get done so nothing falls through the cracks

Who you are

• 1 to 2 years in a high-intensity environment: investment banking, management consulting, executive search at a top firm, or an operating role at a venture-funded startup
• Genuinely curious about venture capital, the people in it, and how the industry actually works
• Technical bias. At the least, you are highly analytical by nature and can find information others can't and synthesize it clearly
• Warm, high-energy, and natural with people. You make rooms better when you walk in.
• Excellent writer with a tight, dense style
• Comfortable with ambiguity and context-switching in a fast-moving, founder-led environment
• Based in San Francisco or NYC. Remote will be considered. Must be in the US and be willing to travel.

Why this role

You will have a front-row seat to how the best venture firms operate, hire, and think about talent. You will build relationships with builders, investors, LPs, and emerging managers that most people spend years trying to access. And you will help build a company from the ground floor with real revenue, real clients, and a vision that extends well beyond search.

Promotions follow ownership and output, not tenure. We stay intentionally lean. Earn it, and the path to real ownership is short.

Compensation

Base: $120-180k DOE

Bonus eligible day one

Profit sharing with meaningful upside as the business grows

DM alexklein0x on X for the fastest reply. Will check LinkedIn weekly.

Staff Mechanical Engineer – Energy Storage

$190,000 – $230,000 + Equity + Benefits

San Jose, CA

Work alongside a small team of exceptionally strong engineers building next-generation energy infrastructure.

We're supporting a rapidly scaling hardware company as they expand their Mechanical Engineering function across multiple levels.

Why join?

• Massive, long-term market tailwinds (data centers + grid modernization)
• Opportunity to help define a new category of energy hardware
• High-calibre, execution-focused engineering culture
• Scaled from 6 → 50 full-time employees in 12 months
• Targeting ~250 employees in 2–3 years (~150 engineers)
• First-principles environment: high standards, minimal bureaucracy, real ownership
• Meaningful equity upside compared to large corporates

What you'll bring

• Bachelor's degree in Mechanical Engineering (or similar)
• 6+ years developing complex electro-mechanical or high-power systems
• Experience taking products from clean sheet design through to production
• Strong physics-based reasoning (not purely standards-driven design)
• Comfortable operating in fast-paced, high-expectation environments

If this sounds aligned with the kind of engineering culture you want to be part of, apply via the link or reach out directly for a confidential conversation.

Production Engineer – Direct Hire

Location: San Jose, CA | Industry: Electronics Manufacturing

Position Summary:

We are seeking a hands-on Production Engineer to support and enhance daily manufacturing operations within a fast-paced electronics manufacturing environment. This role focuses on production line management, equipment troubleshooting, and process optimization to ensure operational stability and efficiency. You will collaborate closely with production, warehouse, and operations teams to maintain safe, reliable, and streamlined manufacturing processes.

Key Responsibilities:

• Support daily production line operations, including setup, workflow coordination, and line optimization.
• Perform basic electrical troubleshooting and assist with equipment-related issues.
• Coordinate production line manpower, line balance, and material flow.
• Partner with warehouse teams to ensure WIP, inventory readiness, and smooth material handling.
• Identify production or equipment issues and implement corrective actions.
• Assist in production improvements, line changes, and operational transitions.
• Communicate production status, issues, and improvement ideas to the Operations Manager.

Required Qualifications:

• 3–5 years of experience in manufacturing, production engineering, or production line management.
• Hands-on experience with production line operations.
• Basic electrical knowledge or electrical technician background.
• Strong troubleshooting skills for production or equipment issues.
• Strong execution, coordination, and follow-up skills.

Preferred Qualifications:

• Experience with automated or semi-automated production lines.
• Familiarity with manufacturing equipment, control panels, and electrical drawings.
• Experience supporting factory relocation, line transfers, or process changes.
• Experience with SAP or other production tracking systems.

Principal Test Engineer

A fantastic career opportunity for an experienced Test Engineer to join a Global Technology Company company, specialising in Semiconductor Design. Here you'll collaborate with some of the brightest minds in the industry. In this highly visible role, you'll play a key part in defining and designing next-generation products that power the world's most advanced systems.

Responsibilities:

• Driving Innovation in Test Engineering. You will lead the development of comprehensive test strategies by collaborating closely with design teams to ensure robust test coverage and product reliability. Communicate effectively across cross-functional teams, customers, and suppliers to align on quality and performance goals.
• ATE Hardware Design for NPI Success. You will design advanced Automated Test Equipment (ATE) hardware—including load boards, probe cards, and interfaces—to support New Product Introduction (NPI) and accelerate time-to-market.
• End-to-End Product Lifecycle Ownership. You will manage the full product lifecycle from initial design and prototyping through high-volume manufacturing and sustaining/RMA support, ensuring seamless transitions and long-term product success.
• Yield & Efficiency Optimization. You will continuously improve test yield, reduce test time, and scale multi-site testing to enhance throughput and cost-efficiency in production environments.

Qualifications

• B.S./M.S. in Electrical Engineering or equivalent experience
• 7+ years of Industry Experience
• Experience and in-depth knowledge of Advantest V93k required
• Experience with Test coverage and DFT (Scan/ATPG/JTAG/BIST)
• Experience working with Local and offshore OSAT's
• Experience on Smartest, Redhat and GIT/SVN
• Ability to independently learn and problem solve
• Comfort with collaboration, open communication and reaching across functional borders

By applying to this role you understand that we may collect your personal data and store and process it on our systems. For more information please see our Privacy Notice ( ).

HCLTech is looking for a highly talented and self- motivated Mechanical Design Engineer with CREO to join it in advancing the technological world through innovation and creativity.

Job Title: Mechanical Design Engineer with CREO

Job ID: 52988

Position Type: Full-time with HCLTech

Location: San Jose, California, United States

Role/Responsibilities

• Strong experience in sheet metal design (and / or plastic design), Electro-mechanical product design and good understanding of manufacturing processes

• Telecom equipment product design (enclosure design/electro-mechanical system design) experience is an added advantage

• Experience designing and producing Manufacturing documentation with GD&T and bi-lateral 1D, 2D & 3D tolerance methods for electronic enclosures using Creo Mechanical Design software

• Experience in designing products within process limits associated with press brake, stage and progressive hard tooling processes for Manufacturing Production

• Expertise with tolerance analysis, relevant safety standards, EMC/EMI design constraints, pcb layout requirements as it applies to the sheet metal enclosure

• Experience with using IDF data translation between ECAD software and Creo Mechanical Design Software

• Good communication skills and experience with Microsoft products for generating reports and other functional aspects

• Demonstrated knowledge and skills required to interact with other design disciplines, Hardware, Safety, EMC/EMI, SI and Manufacturing Engineers during the product development

• Proficient in various computer software tools such as Excel, MS Word, Power Point, and flow chart programs.

• Strong team player who can handle multiple projects and priorities with little direction from manager

• Excellent written and verbal communication skills (English)

Pay and Benefits

Pay Range Minimum: $43.61 per hour

Pay Range Maximum: $55.55 per hour

HCL is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to for investigation.

Compensation and Benefits

A candidate's pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year.

How You'll Grow

At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

ASIC Power Engineer (AR/VR)

Location: Sunnyvale CA

Duration: 6 Months Contract

Experience Required: 10+ Years

Candidates must:

• Demonstrate hands-on power optimization experience
• Be able to explain how they reduced power consumption in ASIC designs
• Have recent experience focused on power analysis/optimization
• Have practical experience using power analysis tools, not just keyword exposure

Overview

We are seeking an experienced ASIC Power Engineer to perform power analysis and optimization for ASIC designs used in next-generation AR/VR products. The ideal candidate will have deep expertise in power optimization, low-power methodologies, and ASIC implementation flows, along with strong scripting and data analysis skills.

This role requires hands-on experience analyzing and reducing power consumption at RTL and netlist levels while working with industry-standard tools from Synopsys and Cadence.

Key Responsibilities

• Perform Power, Performance, Area (PPA) optimization using Synopsys Fusion Compiler
• Conduct RTL and netlist-level power analysis
• Analyze ASIC flows including:
• Synthesis
• Physical Design
• Timing
• Power analysis
• Perform post-processing and scripting on report logs for:
• Data extraction
• Format conversion
• Power analysis insights
• Develop scripts using Python, Tcl, or Perl for automation and analysis
• Implement selected RTL blocks and UPF power intent
• Debug and analyze reports across ASIC flows
• Identify and implement power reduction techniques
• Document results and communicate findings effectively

Minimum Qualifications

• 10+ years of experience in ASIC Power Engineering, CAD Engineering, or Physical Design
• Strong expertise in power estimation tools and synthesis flows
• Hands-on experience with power analysis and optimization methodologies
• Knowledge of power trade-offs in design and backend implementation
• Strong scripting and data analysis skills
• Bachelor's degree in Electrical Engineering, Computer Science, or equivalent experience

Preferred Qualifications

• Experience with Synopsys tools
• Design Compiler (DC)
• IC Compiler (ICC)
• PrimeTime PX / PrimePower
• VCS
• Verdi
• Experience with Cadence Joules
• Proficiency in Python, Perl, Tcl scripting
• Experience with Excel or MATLAB for modeling and data visualization
• Experience in low-power design methodologies
• Hands-on experience with UPF power intent specifications
• Experience with Silicon Power Characterization
• Experience with power profiling at IP or SoC level

Must-Have Skills

• ASIC Power Optimization
• Synopsys Power Tools:
• PrimePower
• PTPX
• DC
• ICC
• Cadence Joules
• Low Power Design methodologies
• UPF Power Intent
• Python / Perl scripting
• Silicon Power Characterization

Nice-to-Have Skills

• Power profiling at IP or SoC level
• Data analytics and visualization
• Experience with Machine Learning related ASIC workloads

Creospan is a growing tech collective of makers, shakers, and problem solvers, offering solutions today that will propel businesses into a better tomorrow. "Tomorrow's ideas, built today!" In addition to being able to work alongside equally brilliant and motivated developers, our consultants appreciate the opportunity to learn and apply new skills and methodologies to different clients and industries.

******NO C2C/3RD PARTY, LOOKING FOR W2 CANDIDATES ONLY, must be able to work in the US without sponsorship now or in the future***

ASIC Power Engineer

Sunnyvale, CA

Long term Contract

Preferred Qualification:

• Synopsys (DC, ICC, PTPX/PrimePower, VCS, Verdi) and/or Cadence (Joules).
• Python, Perl (or similar) scripting and data-post-processing tools.
• Excel (or Matlab) for model fitting, data visualization and analysis.
• Experience in low power design, tools and methodologies including power intent UPF specifications.
• Silicon Power Characterization.
• Some power profiling experience at IP/SoC level.

Must-Have Skills:

• Power Optimization- Experience with Synopsys (DC, ICC, PTPX/PrimePower, VCS, Verdi) and/or Cadence (Joules).
• Should know how to use Python, Perl (or similar) scripting and data-post-processing tools.
• Experience in low power design, tools and methodologies including power intent UPF specifications.
• Silicon Power Characterization.

Nice-to-have Skills:

• Some power profiling experience at IP/SoC level.
• Experience with Silicon Power Characterization.
• Experience with Data analytics and visualization.

Role: ASIC Power Engineer (AR/VR – Meta)

Location: Sunnyvale CA

Duration: 6 Months Contract

Experience Required: 10+ Years

Overview

We are seeking an experienced ASIC Power Engineer to perform power analysis and optimization for ASIC designs used in next-generation AR/VR products. The ideal candidate will have deep expertise in power optimization, low-power methodologies, and ASIC implementation flows, along with strong scripting and data analysis skills.

This role requires hands-on experience analyzing and reducing power consumption at RTL and netlist levels while working with industry-standard tools from Synopsys and Cadence.

Key Responsibilities

• Perform Power, Performance, Area (PPA) optimization using Synopsys Fusion Compiler
• Conduct RTL and netlist-level power analysis
• Analyze ASIC flows including:
• Synthesis
• Physical Design
• Timing
• Power analysis
• Perform post-processing and scripting on report logs for:
• Data extraction
• Format conversion
• Power analysis insights
• Develop scripts using Python, Tcl, or Perl for automation and analysis
• Implement selected RTL blocks and UPF power intent
• Debug and analyze reports across ASIC flows
• Identify and implement power reduction techniques
• Document results and communicate findings effectively

Minimum Qualifications

• 10+ years of experience in ASIC Power Engineering, CAD Engineering, or Physical Design
• Strong expertise in power estimation tools and synthesis flows
• Hands-on experience with power analysis and optimization methodologies
• Knowledge of power trade-offs in design and backend implementation
• Strong scripting and data analysis skills
• Bachelor's degree in Electrical Engineering, Computer Science, or equivalent experience

Preferred Qualifications

• Experience with Synopsys tools
• Design Compiler (DC)
• IC Compiler (ICC)
• PrimeTime PX / PrimePower
• VCS
• Verdi
• Experience with Cadence Joules
• Proficiency in Python, Perl, Tcl scripting
• Experience with Excel or MATLAB for modeling and data visualization
• Experience in low-power design methodologies
• Hands-on experience with UPF power intent specifications
• Experience with Silicon Power Characterization
• Experience with power profiling at IP or SoC level

Must-Have Skills

• ASIC Power Optimization
• Synopsys Power Tools:
• PrimePower
• PTPX
• DC
• ICC
• Cadence Joules
• Low Power Design methodologies
• UPF Power Intent
• Python / Perl scripting
• Silicon Power Characterization

Nice-to-Have Skills

• Power profiling at IP or SoC level
• Data analytics and visualization
• Experience with Machine Learning related ASIC workloads

We are seeking an experienced Cloud Platform Engineer with deep expertise in Red Hat OpenShift and strong Linux systems engineering background. This role will be responsible for designing, building, and operating large-scale OpenShift platforms within on-premises datacenter environments.

The ideal candidate will work closely with SRE teams and Program Management to drive the successful implementation, scaling, and operationalization of enterprise-grade OpenShift infrastructure.

Key Responsibilities

1. Platform Engineering

• Design, deploy, and manage enterprise-scale Red Hat OpenShift clusters in on-prem datacenter environments.
• Architect highly available, scalable, and secure OpenShift platforms.
• Implement cluster lifecycle management (installation, upgrades, patching, scaling).
• Configure networking, storage, ingress, and security components for OpenShift.

2. Infrastructure Build & Automation

• Build and automate infrastructure in datacenter environments (compute, storage, networking).
• Integrate OpenShift with virtualization platforms (VMware/other hypervisors as applicable).
• Develop Infrastructure-as-Code (IaC) solutions using tools such as Terraform, Ansible, or similar.
• Implement CI/CD pipelines for platform deployments and updates.

3. Linux Systems Engineering

• Provide deep Linux system administration and troubleshooting support.
• Optimize OS-level configurations for performance, reliability, and security.
• Automate system configuration and compliance management.
• Diagnose and resolve complex kernel, networking, and storage issues.

4. Reliability & Operations

• Partner closely with the SRE team to establish SLOs, SLIs, monitoring, and alerting.
• Drive observability implementation (logging, metrics, tracing).
• Participate in incident management, root cause analysis (RCA), and remediation.
• Ensure platform resiliency, performance tuning, and capacity planning.

5. Program & Cross-Functional Collaboration

• Work with Program Management to drive large-scale OpenShift implementation milestones.
• Provide technical input into roadmap planning, timelines, and risk mitigation.
• Collaborate with security, networking, storage, and application teams.
• Document architecture, standards, and operational procedures.

6. Security & Compliance

• Implement RBAC, security policies, and compliance controls within OpenShift.
• Harden clusters according to enterprise security standards.
• Support vulnerability management and patch governance processes.

Required Qualifications

• 5+ years of experience in Linux systems engineering (RHEL preferred).
• 3+ years of hands-on experience with Red Hat OpenShift (OCP 4.x preferred).
• Proven experience building infrastructure in on-prem datacenter environments.
• Strong understanding of:
• Kubernetes architecture
• Networking (DNS, load balancing, firewalls, SDN)
• Storage (SAN, NAS, CSI drivers)
• Virtualization platforms (VMware, etc.)
• Experience with automation tools (Terraform, Ansible, GitOps).
• Strong troubleshooting and problem-solving skills.

Preferred Qualifications

• Red Hat certifications (RHCE, OpenShift Certification).
• Experience implementing OpenShift at enterprise scale (multi-cluster environments).
• Experience working in SRE-driven environments.
• Knowledge of DevOps/GitOps practices.
• Experience with monitoring tools (Prometheus, Grafana, ELK, etc.).

About Us

Contemporary Amperex Technology (USA), Inc. (CATU) is a U.S. subsidiary of Contemporary Amperex Technology Co., Limited (CATL), a global leader in the research, development and manufacturing of advanced electric vehicle and energy storage batteries. Established in Michigan in 2017, CATU has played a critical role in advancing electric mobility and energy resilience in the U.S.

Our Vision

To become a globally leading innovative technology corporation, contribute meaningfully to sustainable energy solutions, and provide a platform that supports both the professional and personal growth of our employees.

Job Overview

ESS Technical Solution Engineer is the combination of application engineer and sales engineer. A technical solution engineer should support and service the customer by demonstrating the product function, technical benefits and value to help customer meet their company and business goals and help company to win projects. Combining technical knowledge with strong communication and interpersonal skills, work closely with clients, understanding their specific needs, and then leverage their in-depth understanding of the company's products or services to provide tailored solutions that meet those needs effectively. Additionally, technical solution engineers should gather feedback from clients and bridge the gap between internal development team and customer requirements, helping to refine products and services based on customer needs and experiences.

Key Responsibilities:

• Product Demonstration: Deep understanding of the products or services of products and company. Be able to explain complex technical concepts to clients in a clear and understandable manner and contribute to sales presentations, as well as demonstrating products benefits, value and completed applications
• Client Engagement: Interact directly with clients to understand their needs, challenges, and requirements as well as the competition information from the competitors. Engage in discussions to gather information, analyze the client's projects and requirements, and identify opportunities where company's solutions can add value to win the opportunities
• Solution Development: Once understand the client's needs, sales engineers work to develop solutions that align with the client's projects. This may involve collaborating with the technical team to design tailored solutions that address specific challenges. Provide clients with technical support as needed and relay information to our development teams for product development and update needs
• Proposal Creation: Create detailed proposals that outline the proposed solution and its benefits. These proposals need to address the technical aspects while also highlighting the business value for the client as well as prepare the documents according to customer requirements which may include specifications, user's manual, disposal proposal, etc.,
• Technical Support: Provide ongoing technical support to clients, answering questions, addressing concerns, and helping with any technical issues that arise
• Technical Agreement Negotiations: Involve in negotiations with clients, addressing any technical concerns, clarifying expectations, and ensuring that both parties are aligned on the proposed solution to form final technical agreement
• Risk Assessment and Problem Solving: Identify the possible issues ahead and provide preventative solutions for the risks. Resolve the technical issues during manufacturing, delivering and commissioning until successfully hand over to customer. Cooperate with internal development and project management team if needed
• Market Research: Stay informed about market trends, competitor offerings, and customer feedback. Generate ideas for product and service improvement and innovation based on market trends and customer inputs

Preferred Qualifications:

• At least 3 years work experience in US ESS market
• Previous work experience as an AE or SE of ESS market is advantageous
• Previous experience in utility or ESS developer company is advantageous
• Knowledge of US ESS projects development requirements is advantageous
• Exceptional customer service and interpersonal skills
• Excellent market and competitor analysis abilities
• Excellent analytical and problem-solving abilities
• Superb collaboration and communication
• Superb logical and strategic thinking abilities
• Mandarin Speaking will be a plus

Compensation & Benefits

• Competitive salary commensurate with experience and qualifications.
• Comprehensive benefits package, including medical, dental, and vision coverage.
• 401(k) retirement plan with company match.
• Paid time off and company holidays.
• Professional development and growth opportunities.

Equal Employment Opportunity

CATU is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, or any other legally protected characteristic.

Employment Disclaimer

This job description is not intended to be an exhaustive list of duties, responsibilities, or qualifications. CATU reserves the right to modify, revise, or add job responsibilities as business needs evolve. Employment with CATU is at-will, meaning either the employee or the Company may terminate the employment relationship at any time, with or without cause or notice, in accordance with applicable law.

Export Control & Data Security Compliance

This position may involve access to sensitive systems or information subject to U.S. export control and data security regulations. Employment is contingent upon the employee's ability to comply with applicable laws and company policies related to data protection and controlled information access.

Automation CSV Engineer (Biotech/Pharma)

Location – California Bay Area

Please note: We are only considering W2 candidates at this time. Applications from third-party vendors or C2C arrangements will not be considered.

ADVENT Engineering is an engineering and consulting firm providing expertise to the pharmaceutical and biotechnology industries. Headquartered near San Francisco, California, and with operations in the Eastern and Western US, Canada and Singapore, our company is involved in almost every facet of global pharmaceutical and biotechnology facility design and process engineering and quality system projects.

ADVENT's services include process engineering, automation engineering, project engineering, facility/system design, start up and commissioning, validation and compliance consulting for distinguished and successful biotechnology and pharmaceutical manufacturing companies.

The successful candidate will work with a group of engineers involved in the design, automation, commissioning and start-up of various processes, systems and facilities. A combination of strong technical aptitude, automation engineering skills and technical writing are the desired skill set.

This is an outstanding opportunity to join our growing team!

Position Overview

We are seeking an experienced Sr. Automation CSV Engineer to support a complex automation system migration project at a large, regulated biotechnology/pharmaceutical manufacturing site in the California Bay area. The ideal candidate will bring deep, hands-on expertise in PCS and MES system migration, validation, and implementation, with a strong preference for experience in Rockwell and PharmaSuite environments.

This role requires a senior-level engineer capable of independently executing and leading CSV and automation activities while collaborating closely with cross-functional teams.

Key Responsibilities

• Lead and execute CSV and automation activities for PCS/MES system migration projects
• Support implementation, migration, commissioning, and validation of:
• PCS systems (Rockwell, Honeywell)
• MES systems (PharmaSuite, POMSnet)
• SCADA and PLC platforms
• Author, review, approve, and execute CSV lifecycle documentation, including:
• Validation Plans
• Risk Assessments
• Test Protocols (IQ/OQ/PQ)
• Traceability Matrices
• Validation Summary Reports
• Ensure compliance with SDLC, 21 CFR Part 11, Annex 11, Data Integrity, and GAMP 5
• Manage and document software changes throughout the SDLC per site procedures
• Support programming, configuration, commissioning, and validation of Rockwell and PharmaSuite platforms
• Collaborate with automation, IT, QA, and manufacturing teams
• Support troubleshooting, root cause analysis, and deviation investigations as needed
• Communicate effectively with stakeholders at all levels

Required Qualifications

• 8+ years of experience in CSV and Automation within a regulated biotech/pharma environment
• Hands-on experience with implementation, migration, and validation of:
• PCS (Rockwell and/or Honeywell)
• MES (PharmaSuite, POMSnet)
• SCADA/PLC systems
• Strong, hands-on expertise with Rockwell and PharmaSuite (required)
• In-depth knowledge of:
• SDLC
• 21 CFR Part 11 / Annex 11
• Data Integrity
• Computerized System Validation (CSV)
• Ability to work independently and collaboratively in team environments
• Excellent verbal and written communication skills

Preferred Qualifications

• Familiarity with S88 Batch Standard
• Experience with Rockwell software object development
• MES recipe authoring and testing experience
• Experience with Kneat

Additional Information

• This position requires 100% onsite support in California
• Long-term project opportunity in a regulated manufacturing environment