Storm32 Bgc Schematic Jobs in Usa

Shift Monday
- Friday
- 1st Shift (Day) Pay: $19.25/hour Location: Fort Worth, TX 76177 Schedule: Monday
- Friday 6am
- 2:30pm Electronic Technician II The Electronic Technician II is responsible for setting up, configuring, troubleshooting, and repairing production test systems and products to the system level.

This role provides technical support and feedback to the production team while ensuring compliance with safety and quality standards.

Primary Responsibilities Use, set up, configure, and calibrate test equipment such as soldering tools, oscilloscopes, and related devices.

Troubleshoot and repair products down to the component level.

Read and understand schematics.

Collaborate with Quality Control to ensure proper setup and calibration of products.

Work with Original Equipment Manufacturers (OEMs) to obtain New Product Information (NPI) and resolve design or testing issues.

Understand and utilize the Warehouse Management System (WMS).

Train and implement processes within the assigned department.

Perform work safely and in accordance with company and customer standards and safety regulations.

Education / Experience High school diploma or GED required.

2--4 years of relevant experience.

Proficient in Microsoft Outlook and Excel.

Prior experience with WMS preferred.

Familiarity with PC hardware configuration, including Windows OS and LAN setup.

Strong written and verbal communication skills.

Customer service driven.

Strong team player.

Requirements, Perks, and Benefits (US -- Non-Exempt) Physical & Cognitive Requirements (With or Without Accommodation) Ability to follow policies and procedures Ability to read, write, and interpret information Ability to add, subtract, multiply, and divide Ability to use hands to finger, handle, or feel Ability to sit, walk, or stand for the duration of the shift Must possess visual acuity to perform essential job functions Ability to conduct physical tasks with a full range of motion throughout the warehouse environment Ability to lift/carry items up to 50 pounds Equal Opportunity Employer FedEx Supply Chain, Inc.

is an Equal Opportunity Employer, including veterans and individuals with disabilities.

Know Your Rights Pay Transparency Family and Medical Leave Act (FMLA) Employee Polygraph Protection Act E-Verify Program Participant Federal Express Corporation participates in the Department of Homeland Security U.S.

Citizenship and Immigration Services' E-Verify program (for U.S.

applicants and employees only).

Please click below to learn more: E-Verify Notice (bilingual) Right to Work Notice (English) / Spanish FedEx Supply Chain is committed to providing access, equal opportunity, and reasonable accommodation for qualified individuals with disabilities in its application procedures, hiring, and other terms and conditions of employment.

To request a reasonable accommodation, please contact .

Perks and Benefits at FedEx Supply Chain (FSC) Competitive Pay: FedEx Supply Chain offers competitive hourly rates depending on your location and experience.

401(k) plan with company match after 1 year Tuition reimbursement program Holiday pay and accrued paid time off (Vacation and PTO) Medical, dental, vision, and voluntary benefits available on day one Basic life insurance Basic AD&D coverage Supplemental Life and Supplemental AD&D Short-Term and Long-Term Disability (for full-time employees after 180 days of service) Paid parental leave for both moms and dads Paid bereavement and jury duty Job Disclaimer (US) Please note that this job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position.

The Company reserves the right to modify duties or assign additional responsibilities as necessary to meet business needs.

Job Title : Manufacturing Engineer Technician
- Sr Location : Temecula, CA 92591 Duration : 12 Months Education : High School diploma or equivalent.

2 years minimum experience in a related field preferred Job Description : Mechanical & Electronic Troubleshooting (component-level repair) Reading & Interpreting Schematics Use of Diagnostic Tools (multimeters, oscilloscopes, testing equipment) Preventive & Corrective Maintenance Production Equipment Installation & Qualification Medical Device Manufacturing (preferred)

Summary: 1st Shift 6 am to 2:30 pm Responsible for maintaining all electrically controlled devices on the plant floor Reports to the Maintenance Manager Ensures proper hardware and software configurations Supports production equipment and flow to highest priority work Collaborates across department boundaries Responsibilities: Ensure all electrical equipment is in safe operating condition Practice safe work habits daily and ensure all safety processes are followed Maintain proper tools and clean work areas Attend daily shift meetings to discuss prioritized work orders Troubleshoot and resolve control systems issues to minimize downtime Support project work with Controls Engineers from concept to completion Perform emergency repairs and assist in installing new equipment Document work performed on control systems and support process improvements Provide direct support for Controls Engineering functions in manufacturing processes Perform daily engagement/troubleshooting with end-to-end systems, including machine controls and SCADA Investigate connectivity issues to diagnose and resolve network connection problems Assist in maintaining program/PLC backups for data integrity and recovery readiness Provide technical support for troubleshooting Allen-Bradley, Siemens, and other PLC systems Support and troubleshoot Profibus, ControlNet, and Ethernet data communication systems Replace defective components or parts using hand tools and precision instruments Set up and operate specialized or standard test equipment for diagnostics Read blueprints, wiring diagrams, schematic drawings, or engineering instructions Identify and resolve equipment malfunctions Review electrical engineering plans for compliance with codes and standards Assemble, test, or maintain circuitry or electronic components Maintain system logs or manuals to document equipment operation Educate equipment operators on proper equipment use Integrate software or hardware components using control architecture Install or maintain electrical control systems and industrial automation systems Execute PM work orders and create work orders for issues found during inspections Troubleshoot, repair, improve, and maintain all equipment including electrical components and drive systems Utilize shop equipment and diagnostic tools for equipment assessment Maintain and troubleshoot PLC, HMI, and vendor-developed programs Become SAP proficient to manage work schedules and evaluate work orders Prepare maintenance daily reports using activity logs, analysis, and trends Provide electrical support to capital and internal projects Any other duties as assigned by management Requirements: Bachelor’s Degree, College Diploma, or Equivalent experience 2 years of production/operational work required 1 year of experience in batch, continuous, and discrete manufacturing Required Skills: Experience with PLCs and HMIs strongly preferred Advanced understanding of control systems, relays, sensors, fuses, breakers, and computer networks Capable of operating hand, power, and specialized tools Excellent problem-solving and communication skills Strong computer skills and willingness to use tablets Basic understanding of mechanics Preferred Skills: Knowledge of SAP PM preferred

A-Line Staffing is now hiring a Mechanical Engineering Technician in Brea, CA .

The Mechanical Engineering Technician would be working for a Fortune 500 medical technology company and has career growth potential.

This would be full time / 40+ hours per week.

If you are interested in this Product Development Technician position, please contact Milos Pavlovic at 586-788-7509 or Product Development Technician Compensation The pay for this position is $25.00 – $32.00 per hour Benefits are available to full-time employees after 90 days of employment A 401(k) with a company match is available for full-time employees with 1 year of service on our eligibility dates Product Development Technician Highlights This position is a contract assignment with potential to hire on permanently based upon attendance, performance, and business needs The required availability for this position is Monday – Friday, 1:30 PM – 10:00 PM (2nd Shift).

Work location: Onsite in Brea, CA Interview Process: In-person interviews Mechanical Engineering Technician Responsibilities Gather, maintain, format, compile, and manipulate technical data such as laboratory or material test results and engineering design changes Produce engineering documents, reports, and drawings including flow charts, block diagrams, and schematics Prepare reports and summaries including quantitative analysis Provide technical support to engineers on a variety of technical tasks Assist with scoping equipment for use and completing equipment qualifications Support general lab functions including calibration, safety procedures, and routine equipment maintenance Notify manager or team lead upon recognition of factors that may affect project timelines Assist with developing prototype processes and test setups Execute designed test protocols and conduct testing Document and communicate test results effectively Handle laboratory samples and chemicals used for conditioning and testing Mechanical Engineering Technician Requirements Minimum education requirement is High School Diploma or GED 6+ years of experience in a laboratory environment (corporate or school) OR technician experience in a regulated environment Experience following written procedures Ability to work collaboratively within a team environment High School Diploma or GED Attendance is mandatory for the first 90 days Mechanical Engineering Technician Preferred Qualifications Bachelor of Science degree in a technical field with at least 1 year of laboratory or R&D experience Ability to understand and perform designed test procedures Strong communication skills and ability to work effectively in cross-functional teams Ability to develop solutions to routine technical problems of limited scope Proficiency with personal computers Ability to assist with training lower-level technicians If you think this Mechanical Engineering Technician position is a good fit for you, please reach out to me
- feel free to call, e-mail, or apply to this posting!
*

Systems Integration & Test Engineer Location: Orlando, FL Job ID: #72238 Pay Range: $50-58 7 month contract Active clearance required Plans, implements, tests, documents, and maintains solutions for the integration and testing of in-house developed and COTS/GOTS components, elements, subsystems and/or systems.

Synthesizes customer contractual needs and requirements into system test solutions that acknowledge technical, schedule and cost constraints.

Establishes functional and technical specifications and standards, solves hardware/software interface problems, defines input/output parameters, and ensures integration of the entire system or subsystem.

Reviews, evaluates and derives requirements for testability, develops and directs preparation and execution of comprehensive test plans, procedures and schedules for complete systems and/or subsystems.

Coordinates subsystem and/or system testing activities with programs and other organizations.

Performs analysis of test results and prepares comprehensive subsystem and/or system level evaluation reports which verify and validate system performance.

Writes discrepancy reports and performs integration regression testing to verify/validate incorporated fixes to software, components, subsystems and systems.

Required Experience: -Candidate must have at least 3 years of experience with electrical and mechanical drawings and schematics.

-Candidate must have at least 3 years of experience with basic shop tools, multimeters, oscilloscopes, and other diagnostic tools.

-Candidate must have at least 3 years of experience with Troubleshooting electrical and mechanical systems.

-Candidate must have at least 3 years of experience Authoring test plans, procedures, and reports.

-Candidate must have at least 3 years of experience Developing, presenting, and discussing presentation material technical in nature.

-Candidate must have at least 3 years of experience with Environmental testing.

-Candidate must have at least 3 years of experience with Setting of test instrumentation, collecting test data, and analyzing test data -Candidate must have at least 3 years of experience with Coordinating test plans with leadership, customers, and range personnel -Candidate must have at least 3 years of experience with Presenting test plans to multiple stakeholders -Candidate must have at least 3 years of experience with Planning, leading, conducting complex tests with multiple test objectives Candidate must be able to travel to support work at off-site test locations Candidate must be able to perform work in a lab and an outdoor environment Candidate must be a self starter and able to work independently Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC.

is an equal opportunity employer.

Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.

The Butler America Aerospace, LLC.

EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .

Butler America Aerospace, LLC.

is committed to working with and providing reasonable accommodations to individuals with disabilities.

If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at

Production Support Electrical Engineer Location: Tucson, AZ Job ID: #72096 Pay Range: $54-62
**Clearance Required
** Job Description What is the primary mission of this role?: Responsibilities include the ability to make a quick assessment of a problem, identify additional information required, understand the resources available, compare the urgency of the issue to other failures/issues, and to take the understanding of these parts and create a path for troubleshoot and/or correction and final resolution.

Then it is required to be able to communicate this plan to a cross functional team with diverse backgrounds.

Lastly to continue to drive updates and status of this plan along the way.

What are the main functions of this role?: Problem resolution of production factory and/or supplier issues, troubleshooting, maintenance of technical data package including creation of change documentation using cPDM, presentation of change packages in Review Borad/Change Board, take ownership and drive issues to completion by coordinating team members and resources.

Participate in peer reviews of other engineers from Engineering and Operations groups.

Troubleshoot failures using oscilloscopes, logic analyzers, function generators, programmable power supplies, spectrum/network analyzers, and related tools.

Analyze defect/yield data and implement process improvements to reduce recurring failures.

Other general electrical engineering tasks relating to production support.

Required Skill Sets: Experience with any of the following: Digital, analog, RF and/or mixed signal testing and/or debugging complex circuit card assemblies and/or electro-mechanical systems Experience in Root-Cause Corrective Action investigations Proven experience in manufacturing/test support of electronic assemblies.

Proficiency with lab equipment: oscilloscopes, logic analyzers, function generators, power supplies, etc.

Ability to interpret schematics, PCB layouts, and BoMs.

U.S.

government issued Secret security clearance Desired Skill Sets: Prior Raytheon production support engineering experience Electrical engineering design of CCA, EO, RF, Seeker/Sensor, or electronic subsystem; including circuit design, CCA assembly, electrical test and production/supplier/sub-tier supplier support of test equipment, test automation scripting, test conduction, sensor control, printed circuit board fabrication, circuit card assembly processes and related industry specifications Experience with any of the following tools Mentor Graphics Designer, PSPICE, System Vision, MATLAB, Mathcad, IDL, Computer Simulation Technologies (CST), Microwave Design Studio, High Frequency Structure Simulator (HFSS), Advanced Design System (ADS), Signal Generator, Oscilloscope, and Spectrum Analyzer.

???????Experience with subsystems integration and test, post test flight analysis, problem investigation, Statistical Process Control (SPC) methods in achieving production yield improvements, technical writing, formal presentation, and implementing Engineering Change Notices.

Self-starter who's capable of working independently as well as with a small technical team.

Providing technical oversight and direction, cost estimation, tracking & reporting, coordination, preparation of detailed technical team reports, and proposal support.

Years of Experience Required (if any): a minimum of 3 years of relevant professional work experience Education Level Required: Bachelor's in electrical engineering or similar Culture Team environment.

Frequent collaboration and coordination with Operations, Supply Chain, Quality, and other Engineering disciplines to resolve issues that may arise during production, testing, and integration.

Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC.

is an equal opportunity employer.

Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.

The Butler America Aerospace, LLC.

EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices.

Butler America Aerospace, LLC.

is committed to working with and providing reasonable accommodations to individuals with disabilities.

If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at

A-Line Staffing is now hiring a Product Development Technician .

The Technician will be working for a Fortune 500 company and has career growth potential.

This would be full time / 40+ hours per week.

If you are interested in this position, please apply directly to this job posting or email your resume to .

Compensation: The pay for this position is $33.50 per hour- bi-weekly Schedule & Location: Monday–Friday, 7:00 AM – 3:30 PM Onsite in Brea, CA Job Description Summary: We are seeking a Product Development Technician for our Brea, CA facility.

This individual will support routine technical tasks, contribute to problem-solving efforts, and assist engineers and project leaders with day-to-day lab and development activities.

Duties & Responsibilities: Gather, maintain, format, and manipulate technical data (e.g., lab results, material tests, engineering design changes) Produce engineering documents, reports, and drawings (flow charts, block diagrams, schematics) Prepare reports and summaries, including quantitative analysis Provide technical support to engineers and complete routine technical tasks Assist in equipment scoping and qualification activities Support general lab functions: calibration, safety implementation, routine equipment maintenance Notify manager or team lead of issues impacting project progress Help develop prototype processes and test setups Execute test protocols and conduct testing Document and communicate test results accurately Handle test samples and chemicals used for conditioning and testing Requirements: Minimum Requirements: High school diploma Minimum 6 years of lab experience (school or corporate) OR technician experience in a regulated environment Experience following written procedures and collaborating with a team Preferred Requirements: Bachelor of Science in a technical field At least 1 year of laboratory or R&D experience Experience following test procedures and working in a collaborative environment Preferred Qualifications: Ability to perform and understand designed test procedures Effective communication and ability to work cross-functionally Ability to develop solutions to routine technical issues Proficiency with personal computers Ability to train lower-level technicians .

JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.

Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.

JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.

Job Summary -- Essential Functions/Duties Under close supervision of a technical lead or unit supervisor, an Engineering Technician I performs a variety of basic or routine tasks during the installation, maintenance, repair, troubleshooting, calibration, testing, fabrication, construction, and operation of diverse electronic/mechanical equipment and systems.

Employee will be responsible to perform the following functions/duties: Support production of technical documents and drawings Research technical issues for input to reports and studies Maintain filing systems, databases, and logs for tracking project status and inventory Assist work unit personnel as the on-site customer interface for equipment/system installation, testing, fabrication, and other engineering tasks Comply with engineering documentation standards, engineering plans, system specifications, and test procedures Use established policies and procedures and limited subject matter knowledge to complete relatively simple assignments of moderate complexity that vary in nature and sequence Apply technical knowledge of electronic principles to solve basic problems using diagrams, schematics, engineering data, and test equipment Manipulate computer keyboards and view and interpret computer displays Perform other job-related duties, as required.

Requirements -- Education, Technical, and Work Experience A high school diploma or GED equivalent is required for this position.

In addition, an Engineering Technician I must possess the following qualifications: Hands-on experience performing tasks related to the work unit is desired.

Basic working knowledge of computer systems and integrated software application programs Ability to take direction from senior unit personnel and work under deadlines Good communication and analytical skills Planning/organizational skills.

Salary The Area Wage Determination (AWD) for this position is $27.00 per hour.

Benefits Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.

Working Conditions Work is performed in a typical office environment with no unusual hazards.

Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.

Work is performed both indoors and outdoors.

Outdoor duties may be performed on even or uneven surfaces, which may be dry or wet.

Grease or oil may be found on working surfaces.

Outdoor duties may be performed on gravel or shingled roof.

Climbing stairs, ladders, towers, and scaffolds, and the ability to lift up to 50 lbs., (anything heavier requires two or more people or mechanical assistance) are required.

A government vehicle is used on an as-needed basis.

Travel to remote company work locations may be required.

Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.

They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.

Tasking is in support of a Federal Government Contract that requires U.S.

citizenship.

Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.

SCC: JENG17; A2NTTR

DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.

Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.

Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.

Visit us at to learn more and view our open positions.

Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Hema at (63 or Sri at (63 Title: Sr Software Quality Engineer
- Remote Duration: 6 Months Location: Remote Only W2 candidates are eligible for this position.

Third-party or C2C candidates will not be considered.

Description: Summary: The main function of a quality engineer is to research and test the design, functionality and maintenance of products, equipment, systems and processes and develop quality standards.

A typical quality engineer has the ability to read and interpret blueprints, and evaluate product integrity and standards.

Job Responsibilities: Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.

Establishes program to evaluate precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.

May write training material and conduct training sessions on quality control activities.

May specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative application.

Skills: Creativity, verbal and written communication skills, analytical and problem solving ability.

Team player and detail oriented.

Basic ability to read and interpret blueprints, technical drawing, schematics and computer-generated reports.

Basic experience with computer applications and software related to engineering field, such as Computer Aided Design (CAD).

Education/Experience: Bachelor's degree in engineering required.

2-4 years experience required.

About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.

The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.

DivIHN is an equal opportunity employer.

DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.

Team Player, computer applications, Computer Aided Design (CAD), Creativity
Remote working/work at home options are available for this role.

We are seeking a Process Automation Engineer to join the Maintenance team at a highly automated steel manufacturing plant in Pueblo, Colorado.

This role is responsible for designing, developing, and implementing control systems to improve production efficiency, equipment performance, and process automation.

Key Responsibilities: MUST HAVE 5 YEARS EXPERIENCE WITH ALLEN-BRADLEY/HONEYWELL SYSTEMS Support rolling mills and steelmaking production and maintenance operations Design and implement control systems (hardware & software) to enhance productivity, quality, uptime, and energy efficiency Analyze, modify, and improve PLCs and HMIs Monitor performance indicators and integrate control systems with company information systems Provide maintenance support and resolve process control system issues Develop specifications, design documents, and systems architecture for steel production processes Manage and deliver automation-related projects Qualifications Bachelor’s degree in Electrical, Mechanical, Automated Manufacturing Engineering, or related field 5+ years of relevant experience Proficiency with Allen-Bradley PLCs, drives, HMI software/hardware, and ability to read hydraulic, electrical, and pneumatic schematics Strong computer skills (Excel, Project, PowerPoint) Excellent teamwork, communication, and organizational skills Strong problem-solving and analytical abilities Willingness to be on-call to support operations as needed see above