Logic Gates Truth Table Jobs in Usa
2,586 positions found — Page 2
FUNCTIONAL PURPOSE:
Independently performs the full range of diagnostic, preventive maintenance, alignment and calibration, and overhaul tasks, on both hardware and software on a variety of mail processing, customer service, and building equipment and systems, applying advanced technical knowledge to solve complex problems.
DUTIES AND RESPONSIBILITIES:
- Performs complex testing, diagnosis, maintenance, alignments and calibration, overhaul, and revision, of electronically operated or controlled equipment or systems; may be required to perform maintenance of associated electromechanical equipment and systems.
- Observes the operation of systems and equipment, and applies various testing and diagnostic methods and procedures to locate and correct malfunctions and/or failures and ensures maximum system performance.
- Performs equipment inspections to assess the quality of service or maintenance received, and to discover incipient malfunctions; initiates work orders requesting corrective actions for equipment not meeting maintenance or operating standards; estimates time and materials necessary to make corrections and conducts investigations of frequent or serious equipment failures to determine the cause of the breakdown and to recommend remedial maintenance action.
- Recommends changes to servicing and preventive maintenance activities; assists in the revision of preventive maintenance and operator checklists, and their frequency to sustain the proper degree of maintenance.
- Performs analyses of equipment failures; reviews operational reports, audits, and other information, to determine where operational enhancement can be made to prevent equipment or systems deterioration.
- Participates in the installation, removal, modification, assembly, and/or disassembly of systems and equipment.
- Participates in classroom, on-the-job, and correspondence training programs; attends courses at postal facilities, trade schools, and manufacturers sites; assists in developing and implementing training programs; provides on-the-job training to other lower level maintenance employees.
- Provides technical support to other employees in the facility or in installations within the area served; performs in-process and final operational checks and tests work completed by other employees; may work without direct supervision.
- May drive a vehicle or use other appropriate modes of transportation in the course of assigned duties.
- Follows established safety practices and requirements while performing all duties; reads and adheres to instructions listed in applicable maintenance directives; maintains a library of maintenance directives.
- Performs other duties as assigned.
REQUIREMENTS:
- Ability to demonstrate mechanical comprehension to learn and apply mechanical principles, including a working knowledge of basic mechanical operations (such as levers and pulleys) and the application of physical laws (such as force and gravity). This includes knowledge in the following areas: (A) Power transmission--such as gears, sprockets and chains, belts and pulleys; (B) Power translation--such as cams and cam followers, linkages, springs; (C) Friction reduction'such as bushings, bearings; (D) Fasteners--such as screws, nuts and bolts, pins, rings, clips, couplings.
- Knowledge of basic electricity principles; this includes knowledge of Ohm's law, Kirchoff's law, AC-DC circuitry, relays, switches, and circuit breakers.
- Knowledge of the National Electrical Code may be required for employees in a skilled position. This also includes knowledge of techniques and procedures as used in electrical installations and maintenance (circuit protection, wiring, conduits, etc.).
- Knowledge of electronic principles; this includes knowledge of (A) basic logic gates, symbology, resistors, memory, encoders, decoders, etc.; (B) Hardware/components - such as solid state devices (diodes, transistors, etc.), coils, capacitors, etc.; (C) Digital circuit components - as in registers, adders, counters, memories, flip-flops, encoders, decoders, etc.; and D) AC and DC circuitry - as in circuit analysis, schematic interpretation, etc.
- Knowledge of and ability to follow safety and security procedures for performing maintenance work This includes knowledge of industrial hazards (e.g., mechanical, chemical, electrical, electronic) and procedures and techniques established to avoid injuries to self and others such as lock out devices, protective clothing, and waste disposal techniques.
- Knowledge of current computer technology to understand how technology may be applied to solve a problem or improve system design; this includes knowledge of hardware, software and networking technology/systems and integrated computer systems. This includes knowledge related to: (A) the Operation of computer terminals or other peripherals to enter, operate, and exit programs; to use the systems programs and (B) Retrieving and interpreting reports for diagnostic and information purposes.
- Ability to perform mathematical calculations such as addition, subtraction, multiplication, and division correctly; to solve practical problems by selecting from a variety of mathematical techniques such as formulas and percentages.
- Ability to remember material learned earlier refers to the ability to recall specific information and/or theoretical knowledge and apply it to mechanical, electrical, or electronic maintenance work such as inspection, troubleshooting, equipment repair and modification, preventive maintenance, and installation of electrical equipment.
- Ability to troubleshoot problems to analyze the root cause of a specific error and decide what action to take to prevent recurrence; to back track from a specific problem to identify the source of the error.
- Ability to think logically and critically; to understand the relevance of information; to identify relationships between information and data.
- Ability to think of possible causes for problems and find solutions; to choose the best course of action; to make a decision without delay when the opportunity arises or when all desired information is not available.
- Ability to learn and comprehend new or unfamiliar material; to use multiple approaches to grasp or learn the implication of new information; to quickly incorporate information and ideas.
- Ability to comprehend spatial relations as required to perform maintenance work; to form three-dimensional mental pictures of objects; to know what an object would look like when viewed from a different angle; to determine if something will fit in a specified area. This may include the ability to use technical drawings (e.g. diagrams, blueprints and schematics).
- Ability to read and comprehend job related written materials; this also includes the ability to locate, read, and comprehend text material such as handbooks, manuals, bulletins, directives, checklists, and route sheets.
- Ability to communicate work related information in writing to maintenance, operations and other personnel to complete forms or provide routine and technical information (e.g., in work logs, e-mails, memos and technical reports/documents).
- Ability to follow oral and written directions, instructions, rules, policies and/or procedures correctly and in order.Ability to develop and maintain effective working relationships; to work with teams; to help others; to accept suggestions; to treat others with dignity and respect.
- Ability to demonstrate organizational commitment to the public service goals and mission of the Postal Service. Ability to be conscientious to carry out job tasks; to be responsible and dependable; to take care in performing routine and novel tasks; to track details; to check that all work is accurate and complete; to record information accurately.
- Ability to work from heights refers to the ability to perform safely and efficiently the duties of the position above floor level such as from ladders, catwalks, walkways, scaffolds, vert-a-lifts, and platforms.
- Knowledge and ability to use various hand or portable power tools in performing mechanical, electrical, electronic or other maintenance work; this may include the use of shop power equipment. This ability includes the safe and efficient use and maintenance of such tools as screwdrivers, wrenches, hammers, pliers, chisels, punches, taps, dies, rules, gauges, and alignment tools; refers to the knowledge of, and proficiency with, various power tools; the ability also involves the safe and efficient use and maintenance of power tools such as drills, saws, sanders, and grinders; refers to the knowledge of, and proficiency with, shop machines such as bench grinders, drill presses, and table/band saws.
- Knowledge and ability to use test equipment, gauges or tools to take measurements and/or to take measurements with electrical or electronic test equipment (such as VOMs, oscilloscopes, amprobes) to perform maintenance work; this includes various types of maintenance equipment and may monitoring the operation of a system or machine or use of data networking test equipment.
EXAMINATION REQUIREMENTS:
Applicants must successfully complete Postal Service Test 955, for the Electronics Technician job group, which measures maintenance knowledge, skills and abilities.
In addition, applicants must successfully complete a structured interview evaluation.
ADDITIONAL PROVISIONS:
1. Applicants must be able to operate powered industrial equipment.
2. For positions requiring driving, applicants must have a valid state driver's license, and demonstrate and maintain a safe driving record.
NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S.
Customs and Border Protection (CBP) offers those with Merchant Mariner Credentials the exceptional opportunity of a career in law enforcement working with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission protecting America.
If you're looking for an exciting and rewarding job that also provides great pay, benefits, and job stability, now is the time to make your move: become a Marine Interdiction Agent .
AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade.
DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW! Salary and Benefits Begin your career as a Marine Interdiction Agent (MIA) and make up to $73,939–$96,116 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location.
Recruitment Incentive: New hires that are eligible may receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102.
Eligibility will be determined by Human Resources.) Example annual compensation for the first three years at our CAMB and subordinates new-hire locations (RUS LEAP 25% Retention Incentive).
GS-11 1st year annual pay
- $102,424 GS-12 2nd or 3rd year annual pay
- $132,931 GS-13 3rd year of annual pay
- $158,075 Example annual compensation for the first three years at our Key West, Key Largo, and Marathon, FL new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $108,431 GS-12 2nd or 3rd year annual pay
- $141,575 GS-13 3rd year of annual pay
- $168,352 Example annual compensation for the first three years at our Long Beach, CA new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $107,749 GS-12 2nd or 3rd year annual pay
- $154,974 GS-13 3rd year of annual pay
- $184,285 This career ladder position has a grade level progression of GS-11, GS-12 and GS-13.
You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52-weeks at each grade level (with supervisor approval) and any additional training, licensing, and certification requirements.
Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Recruitment Incentive (RI): Upon Entrance on Duty (EOD), you may be eligible to receive a Recruitment Incentive LEAP: Law Enforcement Availability Pay (25% Everyone) RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) Locations, Key Largo, FL, Key West, FL, Marathon, FL and Long Beach, CA)
*Retention Incentive is contingent on eligibility.
Eligibility will be determined by Human Resources Duty Locations A duty location will be offered after successful completion of the pre-employment process.
The duty location listed in the final offer letter may include any geographic location within the Southwest Region, Southeast Region or Caribbean Air and Marine Branch.
Note: Your opportunity for final selection is increased based on your flexibility to Enter on Duty at priority duty location.
Current possible duty locations include: Southeast Region: Fort Lauderdale, Miami and Marathon, FL and CAMB: Fajardo, Mayaguez, Ponce, and San Juan PR; and Saint Thomas, VI Northern Region: Bellingham, WA Limited Duty Locations as of – 1 2/1/2025 Applying to this JOA does not guarantee any of the locations listed below will still be available once you've completed the pre-employment process.
Locations are offered based on the current needs of the service at that time.
Northern Region: Port Huron, MI Southeast Region: Houma, LA Southwest Region: San Diego, CA Duties and Responsibilities As a Marine Interdiction Agent, you will perform marine-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States.
Typical duties may include: Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
Interpreting radar data to calculate appropriate intercept while tracking vessels and people to a successful interdiction.
Searching persons, vessels, baggage, and cargo for contraband or weapons incidental to detention or arrest.
Collecting, refining, and analyzing strategic and tactical intelligence.
Qualifications This GS-11 grade level position has a selective factor: As a minimum qualification requirement all candidates must have a qualifying Merchant Mariner Credential.
See the U.S.
Coast Guard Issued Merchant Mariner Credentials (MMC) section that is listed below for qualifying capacities.
You qualify for the GS-11 grade level if you possess one (1) year of specialized experience equivalent to at least the next lower grade level, performing duties such as: Independently applying advanced skill in controlling/commanding law enforcement scenes to include conducting searches, making arrests, processing arrests and seizure of evidence and property.
Conducting investigative inquiries using various techniques, examining files and records, physical and documentary evidence to identify logical conclusions.
Utilizing cameras and other electronic high-tech surveillance equipment to gather evidence, collect, evaluate, and then preserve that physical and documentary evidence.
Highly skilled in writing comprehensive arrest, criminal and incident reports.
Assisting government or state attorneys in preparation for court cases or grand juries, testifies as a law enforcement officer in court proceedings, and administrative forums.
Considerable experience applying arrest authorities and constitutional law in various alleged criminal situations, or knowledge and experience of CBP laws, regulations, policies, legal precedent.
OR GS-11 Education Substitution for experience: A Ph.D.
or equivalent doctoral degree, three (3) full years of progressively higher-level graduate education leading to such a degree, or LL.M.
OR Combining Experience and Education: A combination of successfully completed post-bachelors' education (above) and experience.
This will be calculated using your resume and unofficial transcripts submitted with your application.
AND U.S.
Coast Guard Issued Merchant Mariner Credentials (MMC): You must submit a valid, legible copy of your Merchant Mariner Credential at time of application.
Your copies must include the expiration and capacity pages of your MMC.
Qualifying Capacities are Operator of Uninspected Passenger Vessel (OUPV), Mate of 200 gross tons or greater (Inland, Great Lakes, Near Coastal or Oceans), Chief Mate, Second Mate, and Third Mate Unlimited Oceans or Master of 25 GRT or greater (Inland, Great Lakes, Near Coastal or Oceans) OR An Accepted MMLD Application: You must submit proof an accepted MMLD application, for a MMC with a qualifying capacity, and a credential status that is in a positive standing.
It cannot be pending additional information for MMLD application process.
You must have your Official MMC Credential in hand at the time of scheduling and at assessment appointment.
NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible.
Please see the "Required Documents" section below for additional resume requirements.
Other Requirements Citizenship : You must be a U.S.
Citizen to apply for this position.
Residency : You must have had primary U.S.
residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Requirement: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.
Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.
The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
AGE WAIVER: Creditable law enforcement officer service
- Covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d), or creditable service covered by Title 5 U.S.C.
8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement.
This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
Veterans' Preference Eligibility
- To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v.
Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C.
3312.
You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.
Training : This position has a training requirement.
You may be required to successfully complete the training requirement as a condition of employment.
Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.
Travel Required: You may be expected to travel for this position based on operational needs.
How to Apply Click the Apply button on this site.
You will be linked to the CBP Talent Network registration page.
For Position of Interest select Air and Marine Operations (Marine Interdiction Agent (MIA)), then complete the pre-screening questions.
You'll then receive a link(s) to the MIA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.
Be certain to review ALL details of the job opening announcement and follow all instructions in the application process.
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.
NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S.
Customs and Border Protection (CBP) offers those with Merchant Mariner Credentials the exceptional opportunity of a career in law enforcement working with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission protecting America.
If you're looking for an exciting and rewarding job that also provides great pay, benefits, and job stability, now is the time to make your move: become a Marine Interdiction Agent .
AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade.
DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW! Salary and Benefits Begin your career as a Marine Interdiction Agent (MIA) and make up to $73,939–$96,116 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location.
Recruitment Incentive: New hires that are eligible may receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102.
Eligibility will be determined by Human Resources.) Example annual compensation for the first three years at our CAMB and subordinates new-hire locations (RUS LEAP 25% Retention Incentive).
GS-11 1st year annual pay
- $102,424 GS-12 2nd or 3rd year annual pay
- $132,931 GS-13 3rd year of annual pay
- $158,075 Example annual compensation for the first three years at our Key West, Key Largo, and Marathon, FL new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $108,431 GS-12 2nd or 3rd year annual pay
- $141,575 GS-13 3rd year of annual pay
- $168,352 Example annual compensation for the first three years at our Long Beach, CA new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $107,749 GS-12 2nd or 3rd year annual pay
- $154,974 GS-13 3rd year of annual pay
- $184,285 This career ladder position has a grade level progression of GS-11, GS-12 and GS-13.
You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52-weeks at each grade level (with supervisor approval) and any additional training, licensing, and certification requirements.
Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Recruitment Incentive (RI): Upon Entrance on Duty (EOD), you may be eligible to receive a Recruitment Incentive LEAP: Law Enforcement Availability Pay (25% Everyone) RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) Locations, Key Largo, FL, Key West, FL, Marathon, FL and Long Beach, CA)
*Retention Incentive is contingent on eligibility.
Eligibility will be determined by Human Resources Duty Locations A duty location will be offered after successful completion of the pre-employment process.
The duty location listed in the final offer letter may include any geographic location within the Southwest Region, Southeast Region or Caribbean Air and Marine Branch.
Note: Your opportunity for final selection is increased based on your flexibility to Enter on Duty at priority duty location.
Current possible duty locations include: Southeast Region: Fort Lauderdale, Miami and Marathon, FL and CAMB: Fajardo, Mayaguez, Ponce, and San Juan PR; and Saint Thomas, VI Northern Region: Bellingham, WA Limited Duty Locations as of – 1 2/1/2025 Applying to this JOA does not guarantee any of the locations listed below will still be available once you've completed the pre-employment process.
Locations are offered based on the current needs of the service at that time.
Northern Region: Port Huron, MI Southeast Region: Houma, LA Southwest Region: San Diego, CA Duties and Responsibilities As a Marine Interdiction Agent, you will perform marine-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States.
Typical duties may include: Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
Interpreting radar data to calculate appropriate intercept while tracking vessels and people to a successful interdiction.
Searching persons, vessels, baggage, and cargo for contraband or weapons incidental to detention or arrest.
Collecting, refining, and analyzing strategic and tactical intelligence.
Qualifications This GS-11 grade level position has a selective factor: As a minimum qualification requirement all candidates must have a qualifying Merchant Mariner Credential.
See the U.S.
Coast Guard Issued Merchant Mariner Credentials (MMC) section that is listed below for qualifying capacities.
You qualify for the GS-11 grade level if you possess one (1) year of specialized experience equivalent to at least the next lower grade level, performing duties such as: Independently applying advanced skill in controlling/commanding law enforcement scenes to include conducting searches, making arrests, processing arrests and seizure of evidence and property.
Conducting investigative inquiries using various techniques, examining files and records, physical and documentary evidence to identify logical conclusions.
Utilizing cameras and other electronic high-tech surveillance equipment to gather evidence, collect, evaluate, and then preserve that physical and documentary evidence.
Highly skilled in writing comprehensive arrest, criminal and incident reports.
Assisting government or state attorneys in preparation for court cases or grand juries, testifies as a law enforcement officer in court proceedings, and administrative forums.
Considerable experience applying arrest authorities and constitutional law in various alleged criminal situations, or knowledge and experience of CBP laws, regulations, policies, legal precedent.
OR GS-11 Education Substitution for experience: A Ph.D.
or equivalent doctoral degree, three (3) full years of progressively higher-level graduate education leading to such a degree, or LL.M.
OR Combining Experience and Education: A combination of successfully completed post-bachelors' education (above) and experience.
This will be calculated using your resume and unofficial transcripts submitted with your application.
AND U.S.
Coast Guard Issued Merchant Mariner Credentials (MMC): You must submit a valid, legible copy of your Merchant Mariner Credential at time of application.
Your copies must include the expiration and capacity pages of your MMC.
Qualifying Capacities are Operator of Uninspected Passenger Vessel (OUPV), Mate of 200 gross tons or greater (Inland, Great Lakes, Near Coastal or Oceans), Chief Mate, Second Mate, and Third Mate Unlimited Oceans or Master of 25 GRT or greater (Inland, Great Lakes, Near Coastal or Oceans) OR An Accepted MMLD Application: You must submit proof an accepted MMLD application, for a MMC with a qualifying capacity, and a credential status that is in a positive standing.
It cannot be pending additional information for MMLD application process.
You must have your Official MMC Credential in hand at the time of scheduling and at assessment appointment.
NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible.
Please see the "Required Documents" section below for additional resume requirements.
Other Requirements Citizenship : You must be a U.S.
Citizen to apply for this position.
Residency : You must have had primary U.S.
residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Requirement: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.
Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.
The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
AGE WAIVER: Creditable law enforcement officer service
- Covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d), or creditable service covered by Title 5 U.S.C.
8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement.
This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
Veterans' Preference Eligibility
- To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v.
Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C.
3312.
You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.
Training : This position has a training requirement.
You may be required to successfully complete the training requirement as a condition of employment.
Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.
Travel Required: You may be expected to travel for this position based on operational needs.
How to Apply Click the Apply button on this site.
You will be linked to the CBP Talent Network registration page.
For Position of Interest select Air and Marine Operations (Marine Interdiction Agent (MIA)), then complete the pre-screening questions.
You'll then receive a link(s) to the MIA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.
Be certain to review ALL details of the job opening announcement and follow all instructions in the application process.
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.
NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S.
Customs and Border Protection (CBP) offers those with Merchant Mariner Credentials the exceptional opportunity of a career in law enforcement working with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission protecting America.
If you're looking for an exciting and rewarding job that also provides great pay, benefits, and job stability, now is the time to make your move: become a Marine Interdiction Agent .
AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade.
DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW! Salary and Benefits Begin your career as a Marine Interdiction Agent (MIA) and make up to $73,939–$96,116 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location.
Recruitment Incentive: New hires that are eligible may receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102.
Eligibility will be determined by Human Resources.) Example annual compensation for the first three years at our CAMB and subordinates new-hire locations (RUS LEAP 25% Retention Incentive).
GS-11 1st year annual pay
- $102,424 GS-12 2nd or 3rd year annual pay
- $132,931 GS-13 3rd year of annual pay
- $158,075 Example annual compensation for the first three years at our Key West, Key Largo, and Marathon, FL new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $108,431 GS-12 2nd or 3rd year annual pay
- $141,575 GS-13 3rd year of annual pay
- $168,352 Example annual compensation for the first three years at our Long Beach, CA new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $107,749 GS-12 2nd or 3rd year annual pay
- $154,974 GS-13 3rd year of annual pay
- $184,285 This career ladder position has a grade level progression of GS-11, GS-12 and GS-13.
You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52-weeks at each grade level (with supervisor approval) and any additional training, licensing, and certification requirements.
Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Recruitment Incentive (RI): Upon Entrance on Duty (EOD), you may be eligible to receive a Recruitment Incentive LEAP: Law Enforcement Availability Pay (25% Everyone) RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) Locations, Key Largo, FL, Key West, FL, Marathon, FL and Long Beach, CA)
*Retention Incentive is contingent on eligibility.
Eligibility will be determined by Human Resources Duty Locations A duty location will be offered after successful completion of the pre-employment process.
The duty location listed in the final offer letter may include any geographic location within the Southwest Region, Southeast Region or Caribbean Air and Marine Branch.
Note: Your opportunity for final selection is increased based on your flexibility to Enter on Duty at priority duty location.
Current possible duty locations include: Southeast Region: Fort Lauderdale, Miami and Marathon, FL and CAMB: Fajardo, Mayaguez, Ponce, and San Juan PR; and Saint Thomas, VI Northern Region: Bellingham, WA Limited Duty Locations as of – 1 2/1/2025 Applying to this JOA does not guarantee any of the locations listed below will still be available once you've completed the pre-employment process.
Locations are offered based on the current needs of the service at that time.
Northern Region: Port Huron, MI Southeast Region: Houma, LA Southwest Region: San Diego, CA Duties and Responsibilities As a Marine Interdiction Agent, you will perform marine-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States.
Typical duties may include: Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
Interpreting radar data to calculate appropriate intercept while tracking vessels and people to a successful interdiction.
Searching persons, vessels, baggage, and cargo for contraband or weapons incidental to detention or arrest.
Collecting, refining, and analyzing strategic and tactical intelligence.
Qualifications This GS-11 grade level position has a selective factor: As a minimum qualification requirement all candidates must have a qualifying Merchant Mariner Credential.
See the U.S.
Coast Guard Issued Merchant Mariner Credentials (MMC) section that is listed below for qualifying capacities.
You qualify for the GS-11 grade level if you possess one (1) year of specialized experience equivalent to at least the next lower grade level, performing duties such as: Independently applying advanced skill in controlling/commanding law enforcement scenes to include conducting searches, making arrests, processing arrests and seizure of evidence and property.
Conducting investigative inquiries using various techniques, examining files and records, physical and documentary evidence to identify logical conclusions.
Utilizing cameras and other electronic high-tech surveillance equipment to gather evidence, collect, evaluate, and then preserve that physical and documentary evidence.
Highly skilled in writing comprehensive arrest, criminal and incident reports.
Assisting government or state attorneys in preparation for court cases or grand juries, testifies as a law enforcement officer in court proceedings, and administrative forums.
Considerable experience applying arrest authorities and constitutional law in various alleged criminal situations, or knowledge and experience of CBP laws, regulations, policies, legal precedent.
OR GS-11 Education Substitution for experience: A Ph.D.
or equivalent doctoral degree, three (3) full years of progressively higher-level graduate education leading to such a degree, or LL.M.
OR Combining Experience and Education: A combination of successfully completed post-bachelors' education (above) and experience.
This will be calculated using your resume and unofficial transcripts submitted with your application.
AND U.S.
Coast Guard Issued Merchant Mariner Credentials (MMC): You must submit a valid, legible copy of your Merchant Mariner Credential at time of application.
Your copies must include the expiration and capacity pages of your MMC.
Qualifying Capacities are Operator of Uninspected Passenger Vessel (OUPV), Mate of 200 gross tons or greater (Inland, Great Lakes, Near Coastal or Oceans), Chief Mate, Second Mate, and Third Mate Unlimited Oceans or Master of 25 GRT or greater (Inland, Great Lakes, Near Coastal or Oceans) OR An Accepted MMLD Application: You must submit proof an accepted MMLD application, for a MMC with a qualifying capacity, and a credential status that is in a positive standing.
It cannot be pending additional information for MMLD application process.
You must have your Official MMC Credential in hand at the time of scheduling and at assessment appointment.
NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible.
Please see the "Required Documents" section below for additional resume requirements.
Other Requirements Citizenship : You must be a U.S.
Citizen to apply for this position.
Residency : You must have had primary U.S.
residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Requirement: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.
Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.
The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
AGE WAIVER: Creditable law enforcement officer service
- Covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d), or creditable service covered by Title 5 U.S.C.
8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement.
This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
Veterans' Preference Eligibility
- To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v.
Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C.
3312.
You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.
Training : This position has a training requirement.
You may be required to successfully complete the training requirement as a condition of employment.
Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.
Travel Required: You may be expected to travel for this position based on operational needs.
How to Apply Click the Apply button on this site.
You will be linked to the CBP Talent Network registration page.
For Position of Interest select Air and Marine Operations (Marine Interdiction Agent (MIA)), then complete the pre-screening questions.
You'll then receive a link(s) to the MIA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.
Be certain to review ALL details of the job opening announcement and follow all instructions in the application process.
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.
Since 2014, RW Gate Company has designed and manufactured the highest quality water control gates and related equipment used in water control systems. In a short time, we have become a leader in the Water and Wastewater industry. Due to rapid growth, we are looking to fill positions in our manufacturing shop.
This position is responsible for ensuring that our product is manufactured and assembled to meet our customer deadlines. You will assemble component parts into high quality water control gates. You will also work cooperatively with the other members of the shop floor and management team to support other tasks as required.
Essential duties and Responsibilities:
Combining sub-assemblies into one complete unit by following all standard operating procedures, ensuring that all quality standards are met.
Attaching sealants and gaskets along frames according to specifications and drawings
Reading technical documents, prints and work instructions, using templates, jigs and fixtures to execute minor part-fitting operations such as filing, sawing, burring, crimping, trimming, framing
Using hand and power tools to complete assembly
Touching up of products prior to shipment to meet company quality standards
Using grinding wheels and chemical cleaners to prepare materials for assembly
Maintain cleanliness and organization of work areas, including cleaning equipment, performing tool and equipment maintenance, and removing debris or obstructions
Utilizing forklifts and pallet jacks to move product as needed
Special projects as assigned by the shop supervisors
Skills and Qualifications:
Required:
Must be at least 18 years of age
High school diploma or equivalent; technical degree is a plus
Ability to stand, bend, and lift up to 50 lbs. on a repetitive basis throughout the shift
Ability to operate a fork truck
Minimum 1 year experience in assembly or fabrication work involving review of drawings, sketches, and work instructions.
Ability to read, interpret, and analyze 2D CAD drawings
Ability to perform basic shop math and use measuring tools such as tape measures, calipers, and micrometers
Ability to use common hand and power tools
Familiarity with Microsoft Office Suite programs, basic computer skills
Ability to follow safety guidelines and wear required personal protective equipment (PPE)
Capable of working independently with minimal supervision or within a team setting
Preferred:
Forklift experience
Job Type: Full-time
Pay: $18.00 - $22.00 per hour
Expected hours: 40 per week
Schedule:
8-hour shift
Monday to Friday 7am-3:30pm base schedule with overtime and additional Saturday shift available.
Benefits:
401(k)
401(k) matching
Health insurance
Dental insurance
Vision insurance
Life insurance
Paid Time Off and Holiday pay
Education:
High school or equivalent (Preferred)
Experience:
Manufacturing: 1 year (Preferred)
Work Location: In person
It is the policy of RW Gate to afford equal opportunity to all employees and applicants for employment without regard to age, race, religion, color, sex, national origin, marital status, sexual orientation, or pregnancy, and to afford equal opportunities to disabled veterans, individuals with a disability, and any and other characteristic protected by federal, state or local law.
If you require assistance in this application process, please contact the HR department at 518-874-4750 ext. 147.
Compensation details: 18-22 Hourly Wage
PI565138877a25-26289-39935625
Tool allowance included to support your trade.
Our Diesel Mechanics start at $32.00/ hour
401K with 2% automatic company contribution plus company match up to an additional 6%.
Medical Benefits Start Day One!
We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage.
Paid vacation time, sick, and personal time.
Employee uniforms provided.
Strong Safety Culture, newer equipment, and excellent local leadership.
Schedule:
Sunday - Thursday - 8 PM - 4:30 AM
Location - Woodburn, OR
ESSENTIAL DUTIES AND RESPONSIBILITIES
Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.).
Perform preventative maintenance within DOT standards.
Receive road calls, assign third party vendor, and work with business partners on plan of action.
Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines.
Utilize fleet maintenance software system tablet to fully document equipment repair and parts used.
Backup to other maintenance shop personnel.
Willingness and capacity to assume increased responsibility and certificates.
Other duties as assigned by manager.
SUPERVISION:
N/A
RELATIONSHIPS
Internal: All Fleet Technicians, Drivers, Coordinators and Manager
External: Vendor service providers when required
WORK ENVIRONMENT
Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility.
Must be willing to work in extreme temperatures and weather conditions.
MINIMUM QUALIFICATIONS
Must have 3 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic.
Diagnostic and troubleshooting competency relating to equipment repairs.
Successfully demonstrated independent analytical and problem-solving skills.
Prior experience in administering appropriate PM program.
Must furnish own personal hand tools.
Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide).
EDUCATION
High school diploma or equivalent required.
CERTIFICATIONS/TRAINING
N/A
LICENSES
Must possess a valid driver's license.
PREFERRED QUALIFICATIONS
Valid Class-A CDL license and DOT certification
Experience using fleet maintenance software
Welding ability
PHYSICAL QUALIFICATIONS
OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER
JOB REQUIRES WORKER TO:
FREQUENCY:
STAND: CONTINUOUSLY
WALK: CONTINUOUSLY
DRIVE VEHICLE: FREQUENTLY
SIT: FREQUENTLY
LIFT
1-10 lbs (Sedentary): FREQUENTLY
11-20 lbs (Light): FREQUENTLY
21-50 lbs (Medium): FREQUENTLY
51-100 lbs (Heavy): FREQUENTLY
Over 100 lbs (Very Heavy): OCCASIONALLY
CARRY
1-10 lbs (Sedentary): FREQUENTLY
11-20 lbs (Light): FREQUENTLY
21-50 lbs (Medium): FREQUENTLY
51-100 lbs (Heavy): OCCASIONALLY
Over 100 lbs (Very Heavy): OCCASIONALLY
PUSH/PULL 1: FREQUENTLY
CLIMB/BALANCE 2: FREQUENTLY
STOOP/SQUAT: FREQUENTLY
KNEEL: FREQUENTLY
BEND: FREQUENTLY
REACH ABOVE SHOULDER: FREQUENTLY
TWIST: FREQUENTLY
GRASP OBJECTS 3: FREQUENTLY
MANIPULATE OBJECTS 4: FREQUENTLY
MANUAL DEXTERITY 5: FREQUENTLY
1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift)
2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs)
3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel)
4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps)
5 (Manual Dexterity: Typing, use of office machines such as copiers, printers)
Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is $32 per hour.
This role will also receive overtime compensation
Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.
JOIN OUR FLEET TEAM!
Tool allowance included to support your trade.
Our Diesel Mechanics start at $39.00/ hour!
401K with 2% automatic company contribution plus company match up to an additional 6%.
Medical Benefits Start Day One!
We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage.
Paid vacation time, sick, and personal time.
Employee uniforms provided.
Strong Safety Culture, newer equipment, and excellent local leadership.
Schedule:
Wednesday – Saturday 12:00 am – 10:30 AM
Location:
Woodburn, OR
ESSENTIAL DUTIES AND RESPONSIBILITIES
Independently troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).
Perform preventative maintenance within DOT standards.
Mentor other maintenance shop personnel.
Receive road calls, assign third party vendor, and work with business partners to triage appropriate plan of action including equipment swaps etc.
Utilize fleet maintenance software system tablet to fully document equipment repair and parts used.
Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.
Other duties as assigned by manager.
SUPERVISION:
N/A
RELATIONSHIPS
Internal: All Fleet Technicians, Drivers, Coordinators and Manager
External: Dealer Service Managers
WORK ENVIRONMENT
Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility.
MINIMUM QUALIFICATIONS
Must have 5 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic.
Diagnostic and troubleshooting ability using fleet maintenance software.
Successfully demonstrated independent analytical and problem-solving skills.
Must furnish own personal hand tools.
Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet.
Ability to read and understand technical and service manuals.
Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.
Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.
Ability to adapt to changing organizational and operational needs.
Computer and software experience.
EDUCATION
High school diploma or equivalent required.
CERTIFICATIONS/TRAINING
Brake certification
LICENSES
Must possess a valid driver's license.
PREFERRED QUALIFICATIONS
JPRO software experience.
Welding ability
Knowledge with electrical schematics
Basic Microsoft Excel and Word skills.
Leadership experience or qualifications
Valid Class A CDL license and DOT certification
EPA 608 (Type 2 or Universal) certification
PHYSICAL QUALIFICATIONS
OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER
JOB REQUIRES WORKER TO:
FREQUENCY:
STAND: CONTINUOUSLY
WALK: CONTINUOUSLY
DRIVE VEHICLE: FREQUENTLY
SIT: FREQUENTLY
LIFT
1-10 lbs (Sedentary): FREQUENTLY
11-20 lbs (Light): FREQUENTLY
21-50 lbs (Medium): FREQUENTLY
51-100 lbs (Heavy): FREQUENTLY
Over 100 lbs (Very Heavy): OCCASIONALLY
CARRY
1-10 lbs (Sedentary): FREQUENTLY
11-20 lbs (Light): FREQUENTLY
21-50 lbs (Medium): FREQUENTLY
51-100 lbs (Heavy): FREQUENTLY
Over 100 lbs (Very Heavy): FREQUENTLY
PUSH/PULL 1: FREQUENTLY
CLIMB/BALANCE 2: FREQUENTLY
STOOP/SQUAT: FREQUENTLY
KNEEL: FREQUENTLY
BEND: FREQUENTLY
REACH ABOVE SHOULDER: FREQUENTLY
TWIST: FREQUENTLY
GRASP OBJECTS 3: FREQUENTLY
MANIPULATE OBJECTS 4: FREQUENTLY
MANUAL DEXTERITY 5: FREQUENTLY
1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift)
2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs)
3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel)
4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps)
5 (Manual Dexterity: Typing, use of office machines such as copiers, printers)
Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is $39 per hour.
This role will also receive overtime compensation
Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.
Schedule: 8:00am - 4:30pm / Monday-Friday
Staples is business to business. You’re what binds us together.
Our digital solutions team is more than a traditional IT organization. We are a team of passionate, collaborative, agile, inventive, customer-centric, results-oriented problem solvers. We are intellectually curious, love advancements in technology and seek to adapt technologies to drive Staples forward. We anticipate the needs of our customers and business partners and deliver reliable, customer-centric technology services.
What you’ll be doing :
- Keep the Asset Protection Manager informed of all potential workplace security and safety issues.
- Maintain order and control of the front desk, lobby areas and switchboard.
- Prevent internal theft by conducting scanning and bag checking of all employees and visitors exiting the facility.
- Monitor entrance and front lobby to ensure all visitors are authorized, logged in and escorted.
- Monitor entire property via CCTV system, fire, and burglar alarm systems to respond to incidents as needed across multiple fulfillment centers and delivery operations buildings.
- Audit physical security platforms (intrusion, access control & CCTV) across multiple buildings to ensure functionality of all systems.
- Analyze data & conduct video audits relating to Shrink & Cargo Loss across multiple buildings to mitigate risk.
- Monitor parking lot areas to report unauthorized visitors/vehicles or unlawful activity to leadership.
- Notify emergency personnel (police/fire) in the event of emergencies as appropriate.
- Assist and support leadership team with safety, emergency crisis and evacuation drills and real events as needed.
- Ensure regulatory compliance measures are being adhered to with associates and vendors that are entering the facility.
- Manage and maintain safety training and regulatory compliance training documents.
- Administer new hire safety training and annual refresher safety training.
- Monitor all inbound and outbound trailer activity in the trailer yard.
What you bring to the table :
- Ability to work independently in a fast-paced, multi-tasking environment.
- Ability to interact and communicate in a constructive and professional manner.
- Demonstrate competent general personal computing skills.
- Ability to work well in a team environment and maintain strict company confidentiality.
- Asset Protection background.
- Understanding of physical security processes, access control, and CCTV systems.
- Experience handling workplace violence incidents, safety incidents and building evacuations that require notification to Police and Fire.
- Strong written and verbal communication skills.
Qualifications:
What’s needed- Basic Qualifications :
- High school degree or GED, or equivalent experience
- 2+ years of related experience in warehouse operations or loss prevention/asset protection
We Offer :
- Competitive Pay: Starting at $22.65/hour
- Inclusive culture with associate-led Business Resource Groups
- Flexible PTO (22 days) and Holiday Schedule (7 observed paid holidays)
- Online and Retail Discounts, Company Match 401(k), Physical and Mental Health Wellness programs, and more perks and benefits
Job Title: Administrative Assistant (Ongoing Contract)
Location: Near South Gate, CA (Onsite)
Pay Rate: $$24-25/hr
Contract Type: Ongoing Contract
Overview:
Our client near South Gate, CA is seeking a detail‑oriented Administrative Coordinator to support quality control operations. This role is ideal for someone who thrives in a structured environment, enjoys documentation work, and can manage multiple administrative tasks with accuracy. You will work closely with the Manager to ensure proper tracking, organization, and communication of project-related documentation.
Key Responsibilities:
• Scan and organize work order tickets
• Update and maintain internal logs with accuracy and consistency
• Support preparation of agendas for owner’s meetings
• Attend owner’s meetings to take detailed notes
• Draft and issue formal meeting minutes to all relevant parties
• Maintain organized digital filing systems for project documents
• Assist the team with general administrative tasks as needed
Qualifications:
• Prior administrative or document-control experience preferred
• Strong attention to detail, organization, and accuracy
• Ability to work onsite and collaborate with cross-functional teams
• Proficiency with scanning tools, digital filing systems, and basic office software (Outlook, Excel, Word)
• Strong written communication skills and comfort preparing professional documentation
Equal Opportunity Employer/Veterans/Disabled
To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:
• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance
At Covalent Logic, we believe powerful ideas are built through collaboration. As a strategic communications and marketing agency, we help organizations tell their stories, connect with their audiences, and drive real results through smart strategy, creative thinking, and seamless execution.
Our team is made up of strategists, designers, writers, developers, and project leaders who enjoy tackling complex challenges and turning them into meaningful solutions. We pride ourselves on being thoughtful partners to our clients and supportive teammates to one another—creating an environment where creativity, accountability, and curiosity thrive.
Position Overview
At Covalent Logic, Account Managers play a central role in ensuring the success of both our clients and our projects. Acting as the primary liaison between clients and internal teams, the Account Manager oversees the full lifecycle of multiple projects—from initial planning through final delivery—while ensuring work is completed on time, within budget, and aligned with client objectives.
This role requires a combination of strong relationship management, project leadership, strategic thinking, and organizational skills. The Account Manager helps guide teams, maintain clear communication with clients, and identify opportunities to strengthen and grow client partnerships.
Key Responsibilities
1. Client Relationship Management
Build and maintain strong, trusted relationships with clients, serving as the primary point of contact for assigned accounts.
· Develop a deep understanding of each client’s goals, priorities, and challenges
· Maintain regular communication with clients regarding project status, timelines, and deliverables
· Address client questions or concerns promptly and professionally
· Ensure a positive and productive client experience throughout the project lifecycle
2. Project & Campaign Management
Oversee the planning and execution of multiple projects simultaneously, ensuring they are delivered successfully and efficiently.
· Define project goals, scope, deliverables, and timelines
· Develop and maintain project schedules and workflows
· Monitor project progress and adjust plans as necessary
· Manage budgets and ensure projects remain within financial parameters
· Ensure all deliverables meet Covalent Logic’s quality standards and client expectations
3. Team Leadership & Collaboration
Coordinate with internal teams to ensure smooth execution of projects and effective collaboration across departments.
· Work closely with strategists, designers, developers, and vendors
· Assign tasks and coordinate resources based on project needs
· Facilitate collaboration and communication among team members
· Identify and resolve challenges that may impact project success
4. Strategic Planning & Account Development
Support long-term account planning and help identify opportunities to expand and strengthen client relationships.
· Assist in developing strategic plans for client accounts
· Forecast budgets and identify upcoming project opportunities
· Communicate progress on strategic initiatives to internal leadership
· Identify potential opportunities for additional services or campaigns
5. Business Development & Growth
Contribute to the growth of client accounts and the overall success of the agency.
· Identify opportunities for new projects within existing client relationships
· Participate in discussions related to proposals, contracts, and scope development
· Support efforts to expand Covalent Logic’s services within key accounts
6. Issue Resolution & Problem Solving
Act as a proactive problem-solver to ensure projects run smoothly and client expectations are met.
· Address project challenges quickly and effectively
· Escalate issues when appropriate and coordinate solutions
· Maintain a calm and solution-oriented approach when navigating complex situations
Qualifications
Required
- 5+ years of experience in account management, project management, or client services
- Strong communication and relationship-building skills
- Ability to manage multiple projects simultaneously in a fast-paced environment
- Strong organizational and time management skills
- Ability to collaborate effectively with cross-functional teams
Preferred
- Experience in a marketing, communications, or creative agency environment
- Experience managing budgets, timelines, and client deliverables
- Strategic thinking and the ability to identify opportunities for client growth
What Success Looks Like
- Projects are delivered on time, on budget, and at a high level of quality
- Clients view you as a trusted advisor and strategic partner
- Internal teams feel supported, organized, and informed
- Opportunities for additional client engagement and growth are identified
Why Join Covalent Logic
At Covalent Logic, you’ll work alongside a collaborative team of creative thinkers and problem-solvers who care deeply about delivering meaningful results for our clients. We value initiative, creativity, and strong relationships—both within our team and with the clients we serve.