Ic Engine And Ec Engine Full Form Jobs in Usa

We are currently seeking a Sr. Manager, Engineering to join our Minneapolis Milk Plant in Minneapolis, MN. In this newly created role, you will oversee and manage all aspects of the engineering and maintenance functions optimizing productivity and maintaining the facility's infrastructure and equipment. As a people leader, you will direct a team of maintenance supervisors and technicians and work closely with plant management to accomplish goals while demonstrating Kemps' Culture of Excellence principles.

Kemps is a farmer-owned brand of Dairy Farmers of America (DFA), a dairy marketing cooperative owned by more than 12,500 family farmers. Our mark matters and it represents the wholesomeness of dairy that we share with our communities and loved ones. DFA manufactures a variety of dairy products, including cheese, butter, fluid milk, ice cream, dairy ingredients, and more, under well-known and established regional brands. Our fingerprints touch thousands of brands across the marketplace, and we're passionate about delivering the simple pleasures of dairy to people everywhere, straight from our family farm owners.

Responsibilities include, but are not limited to:

• Ensure mechanical and electrical expertise is available to production and other departments to maintain production systems, utilities, buildings, and grounds in a 24-hour 7-day per week operation.
• Ensure the site has an effective predictive/preventative maintenance program which has a maintenance strategy for all assets to remove unscheduled down time, increase the lifespan of assets by keeping them in optimal condition, and contain maintenance strategies so assets are timely maintained to minimize costs of asset breakdowns.
• Utilize a computerized maintenance management system to optimize asset utilization through scheduled preventative maintenance.
• Collaborate with plant management and corporate staff to utilize equipment to improve employee safety, production quality, equipment reliability, and overall equipment effectiveness by utilizing Continuous Improvement techniques and a Management Operating Structure (MOS).
• Collaborate with senior management to identify and prioritize capital improvement projects. Recommend expense or capital projects which are necessary or will improve productivity, safety, or operational efficiency.
• Remain current with the latest and emerging industry regulations and codes relative to mechanical and electrical systems design and operation.
• Prepare and manage the department's budget, ensuring cost-effective allocation of resources.
• Perform replacement analysis of equipment considering space costs, depreciation, service life, and maintenance costs; advise production management of information and recommend appropriate actions.
• Source and evaluate vendors, contractors, and suppliers to obtain quality products and services at competitive prices. Negotiate contracts and agreements with external parties as necessary.
• Promote a safe and environmentally sound workplace that complies with all applicable federal, state, and local regulations.
• Provide management of employees directly or through supervisors to ensure effective selection, retention, development, disciplinary action, and performance management. If a collective bargaining agreement exists, may participate in negotiations, grievances, or other contract-related activities and discussions.
• Follow all DFA good manufacturing practices (GMP) and work in a manner consistent with all corporate regulatory, food safety, quality, and sanitation requirements.

Requirements:

• A bachelor's degree in an engineering discipline is strongly preferred.
• 8+ years' experience in engineering or maintenance functions in a food manufacturing environment.
• Minimum 2 years of supervisory experience of maintenance personnel is required.
• Experience managing budgets and capital projects.
• Ability to develop, scope, schedule, budget, and lead plant capex projects utilizing CAD and/or other tools.
• Experience with electrical motor control circuitry up to 480V 3 phase is preferred.
• Experience with PLC troubleshooting; Allen Bradley experience preferred.
• Ammonia/Refrigeration level 2 certification required (or willing to obtain certification).
• Boiler 1B or greater MN license required (or willing to obtain certification).
• Technical knowledge of wastewater treatment processes, regulatory compliance, and environmental best practices required.
• Union (for union facilities), Safety, and Worker's Compensation experience preferred.
• Proficient in Microsoft Office Suite and Auto CAD (preferred).
• Experience leading and following Safety/Security Policies and Procedures.

Benefits:

• Health and Welfare benefits begin 1st of the month after start date
• 401(k) with company contribution
• Competitive pay
• Paid vacation and holidays
• Career growth opportunities – we promote from within!
• Comprehensive healthcare benefits
• Service recognition and employee rewards
• Employee referral program
• Tuition reimbursement
• Work for dairy farm families

• Flex Die process optimization: Chrome/passivation, fixture design
• Tooling & Fixture Design assist: 3D modeling, DFM
• Support Continuous Improvement efforts: Improve workflow, submission quality, and dashboards
• Support in Automated Assembly & Measurements: Fixture Design, Analysis and Testing
• Support Kaizen events, focusing on product flow/process improvements: Safety, Quality, Design, Delivery, Cost

Local to Bay area

1 day onsite @ Oakland office.

Role must interface with both business and engineers; expected to work directly with engineering teams.

Focus is on the enterprise data platform and data engineering; not an analytics/visualization role.

Core technical expectations

Strong data ecosystem background: experience leading data products or data warehousing initiatives.

Solid understanding of schemas, databases, and ETL (Extract, Transform, Load) processes; no hands-on coding expected but must be able to engage deeply with engineers and "know what they are talking about."

Primary data warehouse platform: Snowflake.

Broader big data background acceptable if not purely Snowflake (e.g., Databricks, BigQuery, Redshift).

Current ETL tool: Informatica; hands-on Informatica expertise is not required.

Analytics/visualization not in scope; Power BI knowledge is a nice-to-have, not mandatory.

Role and scope

Titles vary across industry: product owner (PO), project manager, scrum master, TPM; at PG&E, similar roles may be labeled "product managers."

Not seeking a pure scrum master or a typical external-facing PO who only writes requirements.

Role must interface with both business and engineers; expected to work directly with engineering teams.

Focus is on the enterprise data platform and data engineering; not an analytics/visualization role.

Core technical expectations

Strong data ecosystem background: experience leading data products or data warehousing initiatives.

Solid understanding of schemas, databases, and ETL (Extract, Transform, Load) processes; no hands-on coding expected but must be able to engage deeply with engineers and "know what they are talking about."

Primary data warehouse platform: Snowflake.

Broader big data background acceptable if not purely Snowflake (e.g., Databricks, BigQuery, Redshift).

Current ETL tool: Informatica; hands-on Informatica expertise is not required.

Analytics/visualization not in scope; Power BI knowledge is a nice-to-have, not mandatory.

Our client in the public infrastructure sector is seeking a contract based Portfolio Manager to oversee portfolio-level planning, budgeting, scheduling, and performance management across a range of capital and operating projects, while partnering closely with engineering, construction, and line-of-business stakeholders.

Duration: 1 year

Location: Hybrid New York, NY

Responsibilities

• Support the Engineer of Projects (EOP) in the planning, execution, and closeout of projects within the assigned portfolio
• Coordinate portfolio-level budgets, schedules, and resource planning across multiple engineering projects
• Develop and maintain project delivery plans including scope, deliverables, timelines, resources, and cost estimates
• Collaborate with design, construction, and line departments to support capital plan development, project prioritization, and feasibility assessments
• Establish and manage work breakdown structures (WBS) to support project planning and execution
• Review project delivery plans against approved budgets, cost models, and historical performance; identify and reconcile variances
• Monitor key performance indicators (KPIs) including cost, schedule, accruals, MWBE participation, and risk metrics
• Prepare and maintain accurate expenditure forecasts and performance reports
• Facilitate project and portfolio meetings, capturing key decisions, risks, and action items
• Track progress across all projects within the portfolio and provide regular status updates to stakeholders and leadership
• Support development of capital planning materials and Board-level reporting documentation
• Assist in creating supporting materials such as presentations, reports, and data visualizations
• Contribute to the development and implementation of project delivery policies, standards, and procedures

Requirements

• Bachelor's degree in Engineering, Architecture, Construction Management, Project Management, or a related discipline
• Minimum of 5 years of experience managing or supporting the delivery of capital projects with significant design and construction components
• Proven experience in budget tracking, cost forecasting, and schedule management across multiple projects
• Strong understanding of project delivery lifecycle, including planning, execution, and closeout phases
• Experience working with cross-functional teams including engineering, construction, and business stakeholders

Nice to Have:

• Proficiency with project management tools such as Primavera P6 and Primavera Risk Analysis
• Strong analytical skills with the ability to interpret project performance data and identify trends and risks
• Demonstrated ability to manage multiple priorities, meet deadlines, and work independently
• Excellent organizational and planning capabilities
• Strong communication and presentation skills, including experience presenting to senior leadership and large stakeholder groups
• Proven interpersonal, leadership, negotiation, and decision-making skills

Job description:

Telescent Inc. is a rapidly expanding high-technology company specializing in innovative network management systems. Based in Irvine California, our cutting-edge solutions leverage artificial intelligence and robotic systems to optimize data center operations worldwide, helping clients reduce costs and enhance efficiency through our patented technologies.

Position

We are seeking a dynamic Manufacturing Engineer to join our team and drive excellence in our manufacturing processes. In this role, you will be instrumental in designing, developing, and improving manufacturing systems for our advanced products. Your expertise will ensure seamless production workflows, enhance quality standards, and support continuous improvement initiatives across our manufacturing facility.

Responsibilities

• Develop and implement manufacturing processes for complex electronic and mechanical components, including plastics injection molding, CNC machining, and assembly line operations
• Utilize CAD software such as AutoCAD, SolidWorks, and Creo to design tooling, fixtures, and process layouts
• Program and troubleshoot programmable logic controllers (PLCs), robotics, CNC machines, and vision inspection systems to optimize automation
• Conduct root cause analysis on production issues to identify defects or inefficiencies and implement corrective actions
• Collaborate with process engineering teams to refine manufacturing workflows aligned with ISO 9001 standards and lean manufacturing principles
• Create detailed schematics, technical drawings, and process documentation for manufacturing equipment and industrial systems
• Support factory experience initiatives by applying mechanical knowledge to improve fabrication, tooling, welding, and assembly processes

Skills

• Strong project scheduling skills to manage multiple process improvement initiatives simultaneously
• Expertise in industrial engineering concepts including process engineering and factory layout design
• Proficiency in CAD tools such as AutoCAD, SolidWorks, Creo, and CAM programming for manufacturing applications
• Hands-on experience with robotics programming, vision inspection systems, CNC programming, and industrial equipment maintenance
• Knowledge of plastics injection molding techniques and tooling design for high-precision components
• Ability to perform root cause analysis using structured problem-solving methods
• Familiarity with schematics, GD&T (Geometric Dimensioning & Tolerancing), and industrial schematics for equipment troubleshooting
• Mechanical knowledge related to fabrication, welding, tooling development, and assembly line optimization
• Experience working within a manufacturing facility environment with a focus on continuous improvement practices
• Join us to be part of a forward-thinking team that values innovation, precision engineering, and operational excellence. Your contributions will directly impact the efficiency of our manufacturing processes while supporting the development of groundbreaking technologies used globally.

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Work Location: In person

JOB SUMMARY

The Engineering Intern will have the opportunity to drive a Research & Development Project, to be decided by the Engineering Manager. The ideal candidate will think logically and enjoy solving problems with creativity, diligence, and achievement. Arcmed offers a great work environment, professional development, challenging careers, and competitive compensation packages.

Our Strategy and Purpose

• We provide technology and supply chain solutions for the design and manufacture of precise fluid handling components for diagnostic and analytical instruments.
• We improve patient outcomes by helping solve the world’s toughest diagnostic and analytical challenges.
• We will be the recognized leader in helping engineers, scientists, and doctors to solve the world’s toughest diagnostic and analytical challenges.
• We always act with intention and drive to achieve our purpose.
• Teamwork, collaboration, and diverse opinions make us stronger.
• We are unafraid to make timely decisions, and we empower our people to make decisions, execute them, and move forward.
• We value people and take the initiative and hold themselves accountable.
• Challenging the status quo helps us grow. Look for and call out improvements.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Modify and improve critical components and program PLC for draw down process upgrades.
• Collaborate with the manifold team to assist with design, programming, and fabrication of CNC-milled components for diffusion bonding.
• Study the existing products to gain an understanding of how Arcmed supports industry.
• Work with internal stakeholders to determine areas of improvement.
• Merge the functional intent of the product with various upgrades to create a project proposal.
• Drive project proposal to a Go/No-Go decision.
• Deliver final presentation to Board of Directors outlining project efforts, results, and lessons learned.

Health & Safety:

• Report and take required action regarding injuries, incidents, medical, and accidents required by policy.
• Make the health, safety, protection of rights, and the development of all employees your primary responsibilities.
• Effectively manage medical and first aid emergencies.
• Follow all agency safety/medical-related policies and procedures.
• Follow fire evacuation and disaster procedures correctly and on time.
• Report unsafe situations immediately; ensuring safety is imperative.
• Ensure pertinent emergency telephone numbers are readily available.
• Report symptoms and signs of communicable diseases immediately.
• Consistently use universal precautions.
• Report any incident that could potentially result in negative reactions from the community, law enforcement officers, and other agencies to the supervisor immediately.

EDUCATIONAL REQUIREMENTS, QUALIFICATIONS, and TRAININGS

• Currently enrolled in an Engineering program.
• Engineering degree, Mechanical or Electrical preferred.
• Recommended to be a Junior or Senior with experience in Product Design and Manufacturing.
• Interpersonal skills.

COMPUTER AND SOFTWARE REQUIREMENTS

• Microsoft: Office 365; SharePoint; Teams; Visio; and OneNote preferred.
• Experience with CAD software (preferably SolidWorks)
• Ability to operate media equipment such as tablets, smartphones, and other electronic equipment.
• Ability to work with general office equipment.
• Ability to work with and understand databases is a must, and the ability to learn technical skills.

PHYSICAL REQUIREMENTS & WORK ENVIRONMENT

• Shall have essential physical skills; be able to run, squat, stoop/bend, kneel, climb stairs, and lift at least 50 pounds (or ¼ own body weight).
• Shall have adequate vision, reading, writing, and documentation skills, and hearing to perform the essential functions of the job.
• Must have enough endurance to perform tasks over long periods of time.
• Will be engaged in speaking, sitting, walking, driving, listening, and in communicating both orally and in writing while performing his or her duties.
• Must be able to listen and respond to questions and instructions.

The qualifications, physical demands, and work environment described herein are representative of those an employee will encounter and must meet to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

Arcmed is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

This document does not create an employment contract, implied or otherwise, other than an "at will" relationship.

The above-noted job description is not intended to describe in detail the variety of tasks that may be assigned, but rather to give the incumbent a general sense of the responsibilities and expectations of their position. As the nature of business demands change, so, too, may the essential functions of this position.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Are you passionate about turning innovative concepts into reality? Do you thrive in dynamic environments? Raytheon is seeking a talented and motivated Systems Engineer to join our team within the Systems Engineering and Test Capabilities (SETC) Discipline, supporting a range of programs. This role offers a unique opportunity to work across the full lifecycle of the product, from concept to deployment

Every day will bring new challenges, requiring you to collaborate across disciplines to troubleshoot issues, perform data analysis, and implement solutions. Your contributions will directly impact the success of mission-critical defense systems, and you'll have a hands-on role in ensuring the entire system functions seamlessly.

The Systems Engineering and Test Center (SETC) organization is currently hiring a Systems Engineer II to join our Tucson, AZ location. SETC is an exciting and challenging environment where you will have the opportunity to design, develop and test to shape innovative solutions for our customers. Join our organization and experience the Systems V engineering life cycle while interfacing with a variety of engineering disciplines, subject matter experts, chief engineers, chief technologists, the customer, and so many more to ensure we design, integrate, test and strengthen our systems to work the first time and every time for our warfighters!

In this role, you will have the opportunity to work on an effectors project pertinent to the systems lifecycle.  This role is 100% on-site at our Tucson, AZ campus.

What You Will Do

In this Systems Engineer role, you may support some of the following types of activities:

• Core Systems Engineering: Update, maintain, and improve requirements. Develop system architecture and model using Model Based Systems Engineering. Conduct trade studies based on Concept of Operations. Collaborate with engineers of all disciplines.

• Perform Test Planning: Develop and implement test plans, procedures, integration, and verification documentation in both simulated and real-world environments and perform/execute the testing

• Integrate Systems: Collaborate with multi-disciplinary team to integrate hardware and software into tactical systems, evaluating their functionality and impact. Evaluate test results for requirements compliance.

• Create/modify documentation in support of design reviews and in preparation for test events.

• Perform Platform Integration, Flight Test, Qualification, Design Verification Execution

• Troubleshoot and Analyze: Identify and resolve hardware, software, and system issues through detailed data analysis and debugging.

• Perform Data Analysis: Conduct statistical and numerical analysis test data to ensure optimal system performance and verify requirements.

• Support Missions: Travel as needed to support mission execution at various locations including local RTX facilities, test sites, vendor facilities, and customer locations.

Qualifications You Must Have

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 2 years of prior engineering experience.

• Experience with systems requirements, systems integration, and/or systems test.

• Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date.

Qualifications We Prefer

• Experience in the Defense Industry, and specifically with military systems; tactics, techniques, and procedures, as well as Department of Defense customer infrastructure experience.

• Understanding of the Systems Engineering product lifecycle

• Experience with performing performance analysis and presenting analytical and technical material

• Experience with DOORS, Cameo, or other digital engineering tools.

• Experience with model-based engineering and associated tools

• Experience in developing and managing requirements.

• Experience working in an integration lab, test facility, or in the field, supporting integration and/or verification.

• Experience with evaluating systems using simulated environments.

• Experience with generating technical documentation, such as trade studies, test plans, procedures, or technical reports.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligible – Relocation assistance is available

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

• This position is an onsite role – Tucson, AZ: ,-az-location

• We Are RTX

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

THE OPPORTUNITY

Michelin has Summer 2026 Environmental Engineering Internship opportunities in Greenville, SC, Lexington, SC and Norwood, NC who will craft, implement, and evaluate solutions to environmental problems. Michelin's purpose is to support everyone's right to move freely to find their better way forward. This role makes a direct impact on our world by reducing pollution, conserving resources, and protecting human health and the environment. If respect for people, teamwork and trust are some values you live by you should consider joining us, the Worldwide leader in Tires!

WHAT WILL YOU DO

• Work on a project team to analyze data to improve performance and/or production
• Ensure products meet the defined quality and performance standards
• Assist with productivity, cost-reduction, and continuous-improvement projects
• Study processes and propose improvements

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.
• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Business Resource Groups and Inclusion Councils.
• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.
• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Production and Engineering Technician at Reliable Robotics, you will be a part of the Production organization. This is a small but growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You'll play a critical role in the build, operation, integration, test, diagnostics, inspection, and maintenance of highly reliable systems, including electro-mechanical assemblies, wiring harnesses, components, and subassemblies. You'll also help with the installation of those systems onto aircraft. Your work will support various product development phases such as prototype, research and development, aircraft certification, and recurring production. This is a fantastic opportunity to serve as the last line of defense for ensuring that our safety-critical systems are reliable and produced to the intended engineering requirements.

Responsibilities

• Build, operate, integrate, test, diagnose, inspect, and maintain highly reliable systems, including avionics and electromechanical assemblies, wire harnesses, and circuit card assemblies

• Read, interpret, and work from drawings, controlled documentation, and processes such as drawings, layouts, assembly procedures/work instructions, schematics, engineering drawings, and master parts lists

• Develop and improve manufacturing and installation instructions

• Assure product and process quality by testing finished-product and process capabilities

• Resolve product non-conformances and collaborate with the quality team to implement corrective actions

• Record work performed in a clear, precise, and complete manner

• Assist with the development of production and improvement processes

Basic Success Criteria

• 7+ years of professional experience building and testing electromechanical assemblies, fabrication, integration, or mechanical assembly experience

• 4+ years of hands-on experience reviewing technical designs and working from drawings, schematics, layouts, assembly/procedures, master parts lists, and other controlled documentation

• Ability to proficiently use a PC/Mac, Google Suite, manufacturing execution systems, JIRA, or equivalent tools

• Ability to lift 25-pound boxes to a height of 3-4 feet, with or without reasonable accommodation

Preferred Criteria

• IPC and/or J-STD certification

• Experience working in an electro-mechanical manufacturing company, a precision manufacturing company, or a high-volume manufacturing company

• Electro-mechanical assembly and prototype development experience

• Experience setting up and running tests and experiments

• Experience with electrical wiring

• Soldering experience

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel up to 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $125K - $145K