How Do Remote Controllers Work Jobs in Usa

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Effector Analog and Power Department is responsible for the development, from concept to integration, of Telemetry and Flight Termination products; power systems from all up round to the lowest level power regulation; servo electronics supporting all mechanical motion in our products and low noise mixed signal electronics that provides the analog to digital interface to our front-end sensors. Each of these products generally operate in lower power and voltage ranges less than 10kW and 1000V.

What You Will Do

• Design, analyze, simulate, test, and document power conversion (and related analog) circuitry. This circuitry will dominantly involve non-isolated and isolated switch mode power converters and linear converters. Main emphasis is on board-mounted power end use applications.
• Architect at the power system level.
• See circuit card and stack development through its design phases, from requirements definition through initial integration testing. Includes leading large teams and defining schedules and system level tasking for designs.
• Guide ECAD drafters and junior engineers through layout and routing activities. Define layer stackup definitions. Act as an expert regarding creepage and clearance.
• Lead large teams to success with schedule, budget, and technical execution.
• Engage in personal technical growth and facilitate technical growth in peers and junior engineers. Drive the capture of opportunities needed to mature the organization on the technical front.

Qualifications You Must Have

• Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) and 10 years of prior relevant experience
• Design, analysis, test, and/or simulation experience with linear converters, and familiarity with all the following non-isolated converter topologies: buck, boost, buck-boost.
• Professional design, analysis, and simulation experience with at least one of the following isolated converter topologies: flyback, half-bridge, full-bridge, forward, push-pull, resonant.
• Experience with EMI Filter design, transformer or inductor design, analysis, test, and/or simulation considerations in power electronics circuits.
• Analog electronics design, including the following: FETs/BJTs, op-amp, high/low/band pass filters, clock/data termination, and comparator circuits.

Qualifications We Prefer

• Advanced degree in Electrical Engineering
• Understanding of switching converter control techniques and modes such as voltage mode, peak and average current modes, their advantages and disadvantages. Conceptual familiarity and experience must include stability.
• Experience leading large teams (formally or informally), and experience working with other team leads toward a larger goal.
• Exposure to managing customer relationships.
• Experience communicating and documenting technical topics at the small and large team level and experience presenting to upper levels of management.
• Experience conducting trade studies relating to power electronics architecture at the circuit card stack level.
• Experience guiding drafters through the ECAD process, including the layout and routing concerns specific to non-isolated and isolated power electronics.
• Experience Utilizing and creating electrical design specifications. Should have exposure to requirements definition early in the design cycle.
• Experience designing at the power system level to meet concerns of adjacent disciplines, such as thermal, structural, mechanical, reliability, and quality.
• Experience with Texas Instruments C-2000 family of microcontrollers, Microchip PIC controllers, VHDL, or real time operating systems.
• Experience with using CAN-bus, UART, and/or RS-422.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
• Work Schedule: 9/80 schedule (every other Friday off)
• Relocation Eligibility: This position is eligible for relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
  • Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

• Tucson, AZ:

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Time Type:

Remote Type:

Job Family Group:

Job Description Summary:

Job Description:

Job Responsibilities:

Responsible for identifying issues with equipment and coordinating and performing necessary maintenance

• Applies knowledge of mechanical, electrical and pneumatic systems, maintains and repairs a variety of distribution and facilities equipment – including, but not limited to, CONVEYOR SYSTEMS, AS/RS systems, cranes, variable frequency drives, gearboxes, and belts
• Maintains the operation of electrical systems and equipment by completing preventative maintenance requirements on conveyors, programmable controllers, transformers, and machinery wiring; following electrical code, manuals, schematic diagrams, blueprints, and other specifications; troubleshooting.
• Repairs electrical and mechanical systems and equipment by diagnosing malfunctioning apparatus, such as transformers, motors, and lighting fixtures; determines faulty wiring; inspecting and testing malfunctioning machinery.
• Performs routine maintenance by using hand and power tools, electric meters, and materials handling equipment in performing duties.

Coordinates and/or performs general building maintenance.

• Maintains and repairs general facilities maintenance to include plumbing, painting, lighting, and other building maintenance to ensure buildings are maintained in working order.

Sets specifications for new equipment.

• Installs new machines and equipment by installing power supply wiring and conduit to and between machines and equipment; using hand tools and test equipment.

Other duties, as assigned by the jobholder’s supervisor, may also be required.

Minimum Qualifications:

• High School Diploma or GED
• Minimum of 3-5 years of experience in building maintenance
• KNOWLEDGE OF CONVEYOR SYSTEMS
• Comfortable with working in high or precarious places
• Comfortable working in extreme heat and around moving mechanical parts
• Must be a results-oriented professional with verbal/written communication skills using diplomacy and discretion as well as customer service skills
• Ability to multi-task, work independently and/or within a team, pay attention to detail and meet deadlines
• Utilize sound judgement and problem-solving skills

Preferred Qualifications:

• Bachelor’s degree in related field and/or equivalent training and work experience
• Certified Maintenance and Reliability Technician certification

Physical Requirements:

• While performing the duties of this job, the employee is regularly required to, stand, sit; talk, hear, and use hands and fingers to operate a computer and telephone
• Working up to 25 feet in the air on a scissor lift
• Working in extreme heat

Competencies:

• Accountable for results which impact the department.
• Selects best option from a set of defined procedures/ solutions using common sense and experience of similar situations.

This job description is only a summary of the typical functions of this position, not an exhaustive or comprehensive list of all possible job responsibilities, tasks and duties. Responsibilities, tasks, and duties of individual jobholders may vary from the above description.

-

Breakthru Beverage Group is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, genetic information and other legally protected characteristics. The EEO is the Law poster is available here. If you need a reasonable accommodation because of a disability for any part of the employment process, please call (7 and let us know the nature of your request and your contact information.

Time Type:

Remote Type:

Job Family Group:

Job Description Summary:

Job Description:

Job Responsibilities:

Responsible for identifying issues with equipment and coordinating and performing necessary maintenance.

• Applies knowledge of mechanical, electrical and pneumatic systems, maintains and repairs a variety of distribution and facilities equipment – including, but not limited to, conveyor systems, AS/RS systems, cranes, variable frequency drives, gearboxes, and belts
• Maintains the operation of electrical systems and equipment by completing preventative maintenance requirements on conveyors, programmable controllers, transformers, and machinery wiring; following electrical code, manuals, schematic diagrams, blueprints, and other specifications; troubleshooting.
• Repairs electrical and mechanical systems and equipment by diagnosing malfunctioning apparatus, such as transformers, motors, and lighting fixtures; determines faulty wiring; inspecting and testing malfunctioning machinery.
• Performs routine maintenance by using hand and power tools, electric meters, and materials handling equipment in performing duties.

Coordinates and/or performs general building maintenance.

• Maintains and repairs general facilities maintenance to include plumbing, painting, lighting, and other building maintenance to ensure buildings are maintained in working order.

Sets specifications for new equipment.

• Installs new machines and equipment by installing power supply wiring and conduit to and between machines and equipment; using hand tools and test equipment.

Other duties, as assigned by the jobholder’s supervisor, may also be required.

Minimum Qualifications:

• High School Diploma or GED
• Minimum of 3-5 years of experience in building maintenance
• Comfortable with working in high or precarious places
• Comfortable working in extreme heat and around moving mechanical parts
• Must be a results-oriented professional with verbal/written communication skills using diplomacy and discretion as well as customer service skills
• Ability to multi-task, work independently and/or within a team, pay attention to detail and meet deadlines
• Utilize sound judgement and problem-solving skills

Preferred Qualifications:

• Bachelor’s degree in related field and/or equivalent training and work experience
• Certified Maintenance and Reliability Technician certification

Physical Requirements:

• While performing the duties of this job, the employee is regularly required to, stand, sit; talk, hear, and use hands and fingers to operate a computer and telephone
• Working up to 25 feet in the air on a scissor lift
• Working in extreme heat

Competencies:

• Accountable for results which impact the department.
• Selects best option from a set of defined procedures/ solutions using common sense and experience of similar situations.

This job description is only a summary of the typical functions of this position, not an exhaustive or comprehensive list of all possible job responsibilities, tasks and duties. Responsibilities, tasks, and duties of individual jobholders may vary from the above description.

Any offered compensation is determined based on internal equity, internal compensation ranges, market data/ranges, applicant's skills, and prior relevant experience.

Compensation

• $24.50/hr - $33.63/hr

• $3,000 sign-on bonus

Benefits

• Medical (HMO & PPO), Dental, Vision (PPO)401(k) matching.

• Annual PTO Accrual and holidays

• Rollover Flexible Spending Accounts (FSAs)

• Free Life and AD&D Insurance Employee Assistance Program

Breakthru Beverage Group is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, genetic information and other legally protected characteristics. The EEO is the Law poster is available here. If you need a reasonable accommodation because of a disability for any part of the employment process, please call (7 and let us know the nature of your request and your contact information.

Sincere Builders is adding a Project Manager to its growing team of construction professionals. Our ideal candidate will possess excellent technical skills related to construction management, expert level proficiency in reading all plans and specifications and collaborate with on site Superintendents to deliver a project on time and under budget. Our pay structure rewards work product, skill level and work ethic so if you think you are the right candidate and are looking for a permanent work home, we look forward to hearing from you.

Qualifications:

• Minimum 7 years experience in commercial ground up construction projects in project management role with at least 4 of those years as a Project Manager
• Thorough knowledge in all aspects of building systems with an emphasis on civil and structural work
• Bachelor's degree in relevant field (Masters in Construction Management is preferred)

Responsibilities:

• Lead project implementation and setup requiring interfacing with architect and engineer,
• Conduct subcontractor buyout and subcontract execution
• Work with Superintendent to build Master Construction Schedule
• Process subcontractor payments and vendor payments in conjunction with Controller
• Process Owner billing in conjunction with management
• Manage change orders
• Identify and predict project related conflicts and work with management, Superintendent, Subcontractors, Vendors, inspectors to resolve them,
• Manage and make decisions related to the performance of work related to quality control, Subcontractors staffing, scheduling and material delivery,
• Ensure all necessary permits and insurance are in place and kept current for the term of the project,
• Implement the terms and conditions of the contract based upon established systems, policies and procedures including bidding, preparing contract documents, defining and monitoring compliance with documentation requirements, defining and monitoring compliance with the submittal process and project close out.
• Act as liaison to inspection agencies
• Work with Company upper management and superintendents to continuously modify company processes to improve quality and optimize efficiency
• Complete projects on time, under budget and efficiently utilizing Sincere's processes
• Other duties, services and acts as directed by your supervisor(s)
• Delegate tasks to Project Coordinator and ensure assigned tasks are completed accurately and on time

Skill sets required:

• Ability to read civil, structural, architectural and MEP plans in detail
• Detail oriented, efficient and 'can do' attitude
• Strong verbal and written communication
• Strong and proficient use of computer systems, Microsoft Office Apps and software in general including:
• Blue Beam
• Ability to efficiently utilize company provided project management construction software – Procore

CSI Companies is seeking mutiple Field Service Technicians to work with one of our top healthcare clients!

Title: Field Service Technician

Location: Palo Alto, CA

Type: Contract-to-Hire

Duration: 6 - month contract to start

Pay: $35 - $45/hour W2

Shift: Monday - Friday, 8am - 5pm with occassional weekend work

Description:

Brief Overview

The Sr. Field Services Technician is responsible for providing work direction to field technicians responsible for onsite installation, configuration, repair, and maintenance for a variety of end user and network devices at SHC locations across the San Francisco Bay Area. The Sr. Field Services Technician will additionally provide L2/L3 support as required and work with the SHC Service Desk and desktop engineering teams to identify and remediate recurring issues

What you will do

• Monitor technician activity across SHC field locations, optimizing support and providing escalated technical assistance as required.
• Work with desktop and network engineering and network teams to identify, diagnose, and resolve recurring incidents in the field.
• Resolve escalated service delivery issues and interact regularly with IT customers, including communicating issues to the appropriate internal stakeholders, and support communications to the field regarding service delivery issues.
• Perform root cause analysis on recurring issues and communicate results with desktop engineering, network engineering, and service desk teams.
• Provide service and customer support during field visits or dispatches, representing SHC IT in a professional and businesslike manner.
• Oversee all onsite installation, configuration, repair, and maintenance of desktops, laptops, tablets, mobile devices, associated peripherals, and related software.
• Oversee onsite initial basic network troubleshooting, port activation and deactivation at SHC locations.
• Oversee onsite updates, configuration changes, and installations of hardware and software, and diagnose technical problems to determine proper solutions.
• Assist field technicians with diagnosing problems before arrival, determining needed parts and documentation to minimize down time and multiple trips.
• Determine whether OEM parts or assistance is required and coordinate OEM vendor parts or assistance as required.
• Provide technical support and setup during special events at SHC locations such as conferences.
• •Complete accurate and timely updates in Asset Management tracking system.
• •Maintain and track asset data including but not limited to warranty, license, and maintenance information for technology service assets across the SHC environment.
• •Coordinate and manage asset audits and manage exceptions through a remedial action management process.
• •Ensure process compliance by managing the remedial / corrective action management process for any breaches that occur throughout the lifecycle.
• •Ensure equipment is per the defined SHC standards
• •Work closely and build relationships with SHC vendors. Participate in gathering bids for large purchases and assist management in negotiating better pricing.
• •Consult with Project Managers for procurement of IT hardware for projects and manage procurement

Education

• Four year college degree or advanced certifications (e.g. Microsoft Office Specialist (MOS) Expert or Master, Microsoft Certified Solutions Associate: Office 365

Experience Qualifications

• Five (5) years of related work experience; experience in a healthcare IT environment preferable.

Required Knowledge, Skills and Abilities

• Experience troubleshooting, repairing and supporting the following (or similar):
• Windows 7, Windows 8, and Mac operating systems, as well as common applications (e.g., MS Office, Outlook, VPN);
• HP, Dell, Tangent, and Apple desktop/laptop hardware systems; OEM certification or at least 3 years of documented service required on at least 2 hardware systems required;
• Apple (iPad) and other common tablet computing devices;
• Printers, monitors, external hard-drives, network interface cards, etc.;
• Cisco routers (e.g., 36XX, 76XX, ASR 1XXX);
• Cisco switches (e.g., Catalyst, Nexus);
• Cisco wireless access points (e.g., Aironet);
• Associated networking devices (e.g., LAN Controllers, WAN Optimizers)
• MCSA Windows 7, MCSA Windows 8, and CompTIA A+ required
• One or more of the following certifications preferred : CCIE, CCNA, CCNP, CCDE, CCDP, CCSP, CCVP
• Excellent customer service orientation and verbal communication skills; ability to work in the field with accuracy and minimal direction.

Licenses and Certifications

• DL - Driver’s License – Any US State .

POSITION AVAILABLE IN 3 DIFFEFENT LOCATIONS!

Fresno, Modesto, and Rancho Cordova.

Position Summary:

Jorgensen Company, an employee-owned company since 1994, is looking for a Fire Sprinkler service technician to join our team. The technician will perform routine inspection testing of water-based fire sprinkler systems to include but not limited to, wet systems, dry systems, pre-action systems, Deluge systems and fire pumps with associated equipment. The Fire Sprinkler Service Technician is responsible for the inspection, service, and repair of fire sprinkler systems. This position is also responsible for ensuring detailed write-ups of fire inspection reports in accordance with NFPA 25 Title 19.

Primary Duties and Responsibilities:

• Accomplish inspections under NFPA 25 water-based sprinkler/suppression systems guidelines and other equipment that is a part of the overall fire protection system.
• Perform inspection, testing and maintenance of fire protection systems under NFPA 25 Title 19.
• Perform a 5-year inspection on water-based sprinkler/suppression systems.
• Utilize various hand tools, shop tools, and equipment for testing fire sprinklers.
• Troubleshoot, repair and/or replacement of defective components of the water-based sprinkler system, fire pumps, pump controllers, water flow and tamper switches.
• Request and maintain accountability for parts, tools, equipment, and materials required for work performance and work assignments.
• May be required to conduct both routine and emergency services after normal work periods.
• Available to work after-hours on-call rotation.
• Responsible for safe operation, cleanliness, and operator maintenance of assigned vehicle.
• Prepare and complete required work documents/reports.
• Comply with safety/environmental standards and safe work practices.
• Ability to work independently with minimum supervision and as part of a team.
• Other assignments as duties require.

Requirements:

• Minimum of a High School diploma or equivalent.
• Fire Sprinkler Fitter Card (Required). Skilled and trained (Preferred)
• 2–3 years of experience servicing fire sprinkler systems with strong knowledge of 5-year inspections.
• Familiar with applicable fire and building codes (Preferred)
• A valid state issued driver’s license & DMV record that is acceptable to our insurance.
• Occasionally travel (overnight stays may be required)

Benefits:

• Health Insurance
• Dental/Vision Insurance
• 401(k)
• ESOP Shares
• Flexible Spending Account
• Life Insurance
• Holidays
• Paid Time Off
• M-F, 8-hour shifts
• Company service vehicle provided

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, sit, and work in the field, which could involve exposure to different weather conditions and potentially noisy environments. You must be able to lift up to 50 pounds. You must also be able to drive a motor vehicle. Specific vision abilities required include close vision, and ability to focus. Reasonable accommodation may be provided to enable individuals with disabilities to perform the essential functions.

Jorgensen Company is an Equal Employment Opportunity (EEO) and prohibits employment discrimination and harassment of any type against employees and applicants based on age, race, color, gender, gender identity or expression, sexual orientation, sex, national origin, religion, disability status, genetics, protected veteran or other status protected by federal, state, and local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Note: Candidates selected for this position will be subject to a background and DMV record (if applicable) check and pre-employment drug screen (if applicable) once the signed offer is received.

Equal Opportunity Employer

BASIC PURPOSE

Management support for all practices, procedures, and training related to existing and new restaurant concepts. Assist with management of shipboard projects in restaurant operations fleet-wide, while ensuring that service standards and revenues are achieved and maintained within the targets established by the company. Work in close cooperation with the ship's management teams in tandem with the Director of Restaurant Development and Operations.

POSITION RESPONSIBILITIES

• Research and development of all practices, procedures, and equipment specifications for new and existing restaurant concepts.
• Review and evaluate all aspects of onboard restaurant operations continuously, including development of strategic choices and analysis before determining appropriate courses of action to facilitate implementation.
• Follow-up consistently to ensure accountability to plans. Drive implementation of food and beverage programs by motivating and supporting the ship management teams in developing and implementing action plans that meet operational objectives.
• Liaise with the Inventory Controllers to ensure that food & beverage service related inventory levels are maintained in a cost-effective manner.
• Ensure dining revenues and expenses are properly recorded against appropriate budget, and variations from budgeted amounts, are properly documented.
• Analyze and evaluate detailed costs and consumption of onboard dining rooms, buffets, specialty restaurants against financial targets considering the best interests of the company.
• Analyze and review ship / shore generated reports in relation to restaurant service area costs and revenues, satisfaction ratings and material (consumable/durable) management on a continuous basis. Identify deficiencies within existing service delivery systems and initiate and develop efficient and effective alternative courses of action.
• Develop and maintain positive working relationships with all fleet operations departments to facilitate a team oriented and supportive approach to onboard restaurant service operations. Recognize and reinforce restaurant management ship accomplishments by using existing business indicators as well as by finding new, effective methods of recognition.
• Liaise with Sales and Reservations for special functions, service requests, group requests, dining room reservation and any other restaurant service related issues.
• Manage administration and operational functionality of all restaurant service related capital investment equipment onboard the vessels.
• Participate in the design and layout of buffets, restaurants and other food service related outlets and undertake special projects as needed.
• Prepare a Trip Report after each visit to a vessel with the main focus on general Food & Beverage.
• Must be familiar with the Safety and Environmental Protection Policy and the SEMS, and carry out the policies and procedures appropriate for position. Ensure restaurant operations comply in accordance with U.S.P.H. standards.
• Perform other job related functions as assigned.

EDUCATION: Bachelor's Degree in Hotel Management, Business Administration or related field of study; or any equivalent combination of education and relevant work experience

EXPERIENCE: 10 years of experience in industry food and beverage management position. Extensive experience and knowledge in all aspects of hotel/cruise ship operations

KNOWLEDGE & SKILLS: Expert knowledge of restaurant operations including: service practices, purchasing systems, records procedures and UK/USPH sanitation standards. Fluent in overall beverage knowledge and an understanding of beverage operations in general. Certified Level 1 Court of Master Sommelier preferred in service practices. Working knowledge of Microsoft Office Suite, to include Excel, Word, PowerPoint and Outlook. Strategic planner with innovative and practical management approach to build and develop a successful team. Highly motivated self-starter with complete attention to detail. Ability to maintain confidential proprietary company and personnel related information. Detail-oriented in interpreting and implementing company and work rules, practices and procedures. Solid communication skills to work effectively with subordinates, peers and superiors. Excellent leadership and management skills with ability to develop, motivate, and train a smooth functioning team. Ability to organize and complete work in accordance within established timelines. Ability to work under pressure, manage multiple projects and shift priorities based on business demands. Ability to travel extensively. Ability to work nights, weekends, and occasional holidays.

American Woodmark is one of the nation's largest cabinet manufacturers. By partnering with major home centers, builders, and dealers, we spark the imagination of homeowners and designer and bring their vision to life. Across our service and distribution centers, our corporate office and manufacturing facilities, you'll always find the same commitment to customer satisfaction, integrity, teamwork, and excellence.

We are on a journey to encourage an inclusive Woodmark, and are taking meaningful actions to promote diverse representation across every part of the business. Together, every team member contributes to making American Woodmark a place where people can express who they are through what they do.

PURPOSE:

Provide mechanical troubleshooting and repair support to manufacturing equipment and the general plant. Also provide electrical and electronic maintenance troubleshooting and repair support to manufacturing equipment and the general plant.

ESSENTIAL FUNCTIONS:

• Perform all work in a safe and efficient manner. Obey all lockout/tagout and confined space entry guidelines.
• Troubleshoot and repair mechanical issues on plant manufacturing equipment and on facility equipment.
• Participate in the installation of new or rebuilt equipment.
• Train new or back-up Maintenance Support Technicians as needed.
• Troubleshoot and repair electrical and electronic issues on plant manufacturing equipment and in the facility itself
• Perform scheduled periodic maintenance of equipment.
• Perform all work in a safe and efficient manner. Obey all electrical safety codes and lockout/tagout procedures.
• Understand and follow the local and national electrical codes.
• Use a personal computer (PC) to track work orders and for maintenance and troubleshooting of programmable

logic controllers (PLC’s).

• Be a self-starter and team player on the maintenance team.
• Perform other duties as directed by Maintenance Supervisor or other member of the plant leadership team.
• Perform repairs and maintenance as needed on all Mill equipment including panel saw and CNC router
• Troubleshoots and repairs of electric lift equipment, conveyor systems, as well as technical, mechanical hydraulic and pneumatic issues were needed. Understands and troubleshoots conveyor operating system logic
• Performs preventative maintenance as well as necessary modifications on electric lift equipment, conveyor systems and buildings.
• Provides equipment status report, including details of unusual maintenance problems.
• Follows all safety guidelines established by manufacturer, Home Depot, or government agencies. Adherence to all safety codes and OSHA standards
• Maintains safe and clean working environment, performing daily cleanup of work areas

SUPERVISORY RESPONSIBILITIES

This job has no supervisory responsibilities.

QUALIFICATIONS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required.

Education, Experience and Skills

• High school diploma or general equivalency degree (GED) is preferred.
• Minimum of 2 years of vocational or technical training in industrial mechanics, pneumatics, or hydraulics.
• Required organized Basic Electrical class consisting of industrial electricity, motor controls & industrial electronics (PLC’s).
• Experience in industrial mechanical maintenance and repair of air tools
• Good written and oral communication skills.
• Good PC skills with knowledge of Windows preferred.
• Required experience of four years in an organized maintenance organization

Language Skills:

Ability to read, analyze, and interpret common plant documents such as work orders, packing lists, or equipment operating and parts manuals. Ability to listen and communicate effectively with co-workers and customers/clients to respond to common inquiries or complaints.

Mathematical Skills:

Ability to apply basic mathematical concepts like addition, subtraction, multiplication and division to such tasks as inventory control, material ordering, and job order verification.

Reasoning Ability:

Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an assorted number of tasks or instructions.

PHYSICAL DEMANDS

While performing the duties of this job, the employee is regularly required to stand, walk, bend and reach. The employee frequently is required to use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to lift to 20 pounds and occasionally up to 50 pounds.

WORKING CONDITIONS:

Indoor and outdoor manufacturing environment. The noise level is usually moderate to high and hearing protection is required. Safety glasses are required. Occasional evening and weekend work required. Technicians must be willing to work overtime with little or no notice.

AN EQUAL OPPORTUNITY EMPLOYER:

The American Woodmark Corporation does not discriminate on the basis of race, color, national origin, ancestry, age, religion, military and veteran status, sex, gender, gender identity, gender expression, sexual orientation, genetic information, marital status, medical condition, pregnancy, or any other legally-protected characteristic; and it will comply with all applicable state discrimination laws. No person shall be denied employment solely because of any disability which is unrelated to the ability to engage in the essential functions involved in the position for which application has been made either with or without reasonable accommodations.

*Weekly travel is to be expected.

The Service Technician will perform routine, preventative maintenance and repairs on rotary screw air compressors. Preventative maintenance should be conducted in accordance with manufacturer's recommendations. The main responsibility of this role is to troubleshoot and perform diagnostics on malfunctioning compressors, determine possible causes for malfunctions, and perform repairs. Prior to and following preventative maintenance and repairs, they are responsible to test and document the proper operating parameters of the compressor.

Customer Service

The Service Technician must provide a high level of customer service, responding to customer needs and working to satisfy customer expectations within a timely manner. A good Service Technician can guarantee returned business by developing rapport with customers through effective communication, interpersonal skills, and professionalism. Qualifications

· High School diploma or equivalent required with technical training in electrical, hydraulics, and/or pneumatics preferred.

· 1-2 years of strong mechanical and electrical skills with demonstrated expertise in the maintenance, overhaul, and repair of a wide variety of industrial equipment, including electrical, hydraulics and/or pneumatics.

· Compressor experience strongly desired.

· Possess and maintain a valid Driver s License.

· Able to work independently with strong self-management and professionalism.

· Able to complete work within assigned deadlines.

· Computer proficiency as required for communication, research, work orders and programming various controllers.

· Ability to use Microsoft Word and Excel for report purposes

· Wear protective equipment (such as hard hat, steel toe shoes, safety glasses and hearing protection)

· Work outside in all weather conditions

· Work hours may vary in length and schedule (may include a non-standard work week)

· Available for a rotating schedule of on-call work on evenings, weekends and holidays.

· Travel and overnight stays will be required.

· Must be able to lift up to 50 lbs. on a regular basis and work in industrial environments including extremes in temperature with continuous walking, reaching, bending, and kneeling.

· The applicant selected for this position may be required to successfully complete a background check and drug test.

Additional Job Functions

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice

· Become familiar with multiple functions of in-house business & service software system.

· Additional duties as assigned

Job Summary

This role involves coordinating and managing IT-related projects, including creating and maintaining project schedules, escalating risks, and collaborating with internal and external stakeholders. Responsibilities include vendor coordination, overseeing hardware/software installations, assigning project resources, and supervising both internal staff and outsourced teams. The role requires flexibility for night/weekend work and regular travel.

Essential Job Functions

• Builds and maintains project work plans and/or schedules

• Assists Corporate PM to build and maintain project work plans on Corporate-initiated projects

• Escalates project issues and/or risks to the business owner/IT Director

• Works with vendors on invoicing, moves, quotes, pricing etc.

• Coordinates with the NOS (New office setup) team on IT updates.

• Involvement and supervision of installations of new hardware and software

• Assists with identifying project resources needed and assigns individual responsibilities

• Partners with outsourced resources on all projects for effectiveness and efficiencies

• Partners with outsourced Resources to coordinate Technician weekly assignments

• Supervises, trains, and mentors the staff to maintain standards and ensure future development

• Compliance with all personnel policies and procedures.

• Compliance with HIPAA policies and procedures.

• Perform additional duties and related essential duties as assigned.

• Data Analysis - Analyzes and correlates network dataflow logs, web logs, computer and application user activity logs, and security incident logs for information relevant to a real or potential information security or privacy breach or to support decision making and risk mitigation.

• Project coordination - Support discovery and information gathering sessions. Perform alternatives analysis documenting pros and cons, cost, feasibility, risk and other information to support a decision to select the best solution. Assemble project participants to organize work to complete specific tasks on projects. Organize and facilitate meetings to identify and remove barriers, and to progress work. Follow-up with assignees on incomplete tasks and open issues.

• Collaborates with users to discuss computer data access needs, to identify security threats and violations, and to identify and recommend needed programming or process changes.

• Uses data encryption, firewalls, and other appropriate security tools and applications to conceal and protect transfers of confidential digital information.

• Develops and implements plans to safeguard digital data from accidental or unauthorized modification, destruction, or disclosure; adheres to emergency data processing needs.

• Reviews violations of security procedures; provides training to ensure violations do not recur.

• Monitors and restricts access to sensitive, confidential, or other high-security data.

• Assists with the implementation of AD groups, domain controllers, user management and GPO.

• Assists with MFA rollouts and audits.

• Assists with system build out and integration efforts.

• Works with IT vendors on project implementations.

• Safeguards system security and improves overall server and network efficiency.

• Work Weekends and nights when required.

• Travel required 30%-40%.

Other Essential Tasks/Responsibilities/Abilities

Specific knowledge and skill-based competencies required to satisfactorily perform the functions of the job include:

• Demonstrated problem-solving and analytical skills.

• Proficient, or able to gain proficiency with, a broad array of security software applications and tools.

• Thorough understanding of computer-related security systems including firewalls, encryption, password protection and authentication.

• Proficient in Microsoft Office Suite or related software. Strong documentation skills.

• Excellent verbal and written communication skills.

• Organized with attention to detail.

Education, Experience, Skills, and Requirements

• 2-year College Diploma or Bachelor’s degree in computer science, Programming, or a related field (or equivalent experience).

• 3-5 years internal or external experience with technology systems, hardware, and Healthcare applications

• 3-5 years IT support, installation, and repair experience

• A+ certification (plus, not required)

• Knowledge of HIPAA and healthcare preferred

• Windows Operating System (Windows 10, 11)

• Windows Server (2016, 2019, 2022)

• Basic Greenway Intergy Product Knowledge (optional)

• Knowledge of basic Networking, VPN and firewall

• Remote desktop connectivity

• Internet browsers (e.g. Edge, Chrome, Firefox, Safari)

• MS Office Suite /2013/2016/2019

• Office 365

• Microsoft Exchange

• Windows Active Directory, DUO

• Knowledge of ConnectWise, CrowdStrike, Sophos

• Demonstrated leadership abilities, with a focus on team dynamics and interpersonal skills

• Excellent understanding and strong customer focus

• Able to think strategically and conceptually while managing details

• Good organizational and technical skills

• Able to work independently and be strong team player

• Strong self-initiative