Fault Cast Jobs in Usa

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space.

Our missions have direct impact to global security, like missile warning and Earth observation.

Our team is curious, bold and innovative.

We take risks, innovate and explore new techniques and technologies.

We influence change because we challenge the status quo.

And when we watch our satellites launch, we know each one of us made it happen.

Job Summary Autonomy Engineering is focused on design, analysis, and development of mission Concepts of Operations (CONOPS) from customer use cases and requirements, and enabling mission success through comprehensive on-board fault management and autonomy.

Engineers in the group are integral throughout the entire program lifecycle.

They are key stakeholders in the design and validation of mission CONOPS and Design Reference Missions (DRM), and are leaders in comprehensive end-to-end software integration, validation, and testing.

They define the underlying architecture for fault detection, isolation, and response (FDIR), and own the development and validation of satellite/constellation specific fault configuration(s).

They are the chief architects and implementers of satellite/constellation autonomy, ensuring mission level objectives are met and spacecraft health and safety are always maintained.

As an Autonomy Engineer on the Autonomy Team, you will be the Responsible Engineering Authority (REA) for all Autonomy for a program, study, or proposal.

You will define fault & autonomy requirements; define states, modes, and transitions; define and develop the fault & autonomy architecture for satellites/constellations, including fault-tolerance and redundancy requirements; define and analyze thresholds and persistence of on-board fault tests; design fault responses to ensure containment of failed hardware and health and safety of on-orbit satellites; provide tools and procedures for use during on-orbit mission operations; and support on-console mission operations for on-orbit spacecraft as a mission specialist.

In addition to execution of technical design, analysis, and operation, you may be responsible for project management activities to support programs, ensuring that high-quality work products are delivered on-time.

This position's internal job code is Systems Engineer.

Our team is currently hiring for Levels 3.

Position Responsibilities: Perform fault and autonomy requirements definition, verification, and validation Define satellite/constellation states, modes, transitions, and other autonomous spacecraft behaviors Contribute to architecture concepts, CONOPS, and technology trade-off analyses Design and validate onboard fault detection, isolation, and responses and perform end-to-end validation of autonomy products and behaviors Support on-console operations for on-orbit missions Other duties as assigned This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at one of the listed location options.

Security Clearance and Export Control Requirements This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R.

§ 120.15 is required.

"US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.

Basic Qualifications (Required Skills/Experience): 2 years experience in satellite design and/or operation Familiarity with common analysis tools such as MATLAB/Simulink, Python, STK, etc.

Exceptional critical thinking skills and an ability to notice and debug problems with minimal guidance Ability to anticipate effects and interactions for varying cases across a complex system Strong attention to detail while maintaining big-picture perspective This position requires the ability to obtain a U.S.

Security Clearance for which the U.S.

Government requires U.S.

Citizenship.

Preferred Qualifications (Desired Skills/Experience): 5 years experience in satellite design and/or operation Experience with fault management strategies/architectures for safety of mission critical systems Experience with autonomous system design and analysis Ability to plan and execute integrated system fault management and autonomy V&V (validation and verification) Experience with satellite end-to-end testing Possess active TS/SCI clearance Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process Drug Free Workplace: Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift: This role will be on 1st Shift Total Rewards: At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: Level 3: $104,550
- $153,750 Millennium is DDTC-registered, ITAR-compliant Company.

This position is located at a facility that requires special access.

Applicants MUST be U.S.

citizens and eligible for a security clearance.

Additionally, applicants must be willing to apply for and maintain a security clearance.

We encourage all interested candidates to apply for any open position for which they feel they are qualified.

Applications for this position will be accepted until Mar.

26, 2026 Export Control Requirements: This position must meet U.S.

export control compliance requirements.

To meet U.S.

export control compliance requirements, a "U.S.

Person" as defined by 22 C.F.R.

§120.62 is required.

"U.S.

Person" includes U.S.

Citizen, U.S.

National, lawful permanent resident, refugee, or asylee.

Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.aa415a4b-8b21-40fc-a65c-70d2b25ca29a

CitiMed is a unique medical facility that provides exclusive healthcare amenities to our community. The range of medical and rehabilitative services offered has been specifically selected to treat traumatic injury patients. We provide a variety of health services including diagnostic and rehabilitation. Our vision directs the evolution of our practice, as we strive to improve our services to the community. All CitiMed offices are multilingual and staffed with individuals to make any experience pleasant. You can learn more about us at Medicine & Rehabilitation physicians (PM&R), treat patients with physical impairments or disabilities to improve their quality of life and functional ability. They may work with patients who have injuries to their muscles, bones, tissues, or nervous system. PM&R physicians may also treat patients with neuromuscular disorders, musculoskeletal trauma, chronic pain, cardiac or pulmonary disease, or other disabling conditions.

Some responsibilities of PM&R physicians include:

• Examining patients: Assessing mobility, strength, communication, cognition and pain characteristics
• Developing treatment plans: Using non-medical devices or therapies
• Monitoring progress: Tracking patient responses to treatments and the effectiveness of pain management interventions
• Teaching patients: Helping patients and their families adapt to lifestyle changes PM&R physicians who treat injured workers may need to coordinate medical care if multiple specialty physicians are required.
• Worker’s Compensation is a no-fault insurance program that may cover rehabilitative services, such as physical or occupational therapy, if deemed medically necessary. Some PM&R physician jobs may prefer candidates with previous clinical experience in PM&R, work and motor vehicle-related injuries, and knowledge of workers’ compensation and no-fault laws & regulations.

Requirements:

• Must hold a current license
• Must be Board Certified PM&R
• Strong leadership and team management skills. Ability to critically think and provide solutions and action plans on issues.
• Excellent communication and interpersonal skills
• Ability to work independently and multitask in a fast-paced environment

Preferred Experience

• Minimum 2-5 years of Workers Compensation/No-Fault experience
• Understanding of NY regulations on Workers Compensation and No-Fault
• Knowledge of HIPAA guidelines and compliance

Come and join the magic with Aulani, A Disney Resort and Spa! Perks and benefits may include: 100% full coverage of healthcare for you and your eligible dependents Tuition paid upfront at network schools Free lunch Free parking Free theme park admission and much more! We're looking for talented people who are self-starters, passionate about what they do and strive for Guest satisfaction.

Housekeeping Custodial Cast Members play an important role our home-away-from-home experience for each of our Guests every day.

Their work can make all the difference for our Guests experience.

The Housekeeping Custodial role is responsible for cleaning and maintaining all hotel property.

Custodial Cast Members are responsible for cleaning the Resort's on stage and backstage locations including all interior and exterior public areas.

Our Hotel Custodial Cast also clean Restaurants, Rest Rooms (Guest and Cast), pool area, lobby, meeting rooms, Spa and Utility/Support with Guest interaction.

Graveyard responsibility also includes some guest room cleaning and room deliveries.

Responsibilities : Maintain cleanliness of all Front of House Guest areas.

Responsibilities include but are not limited to: Restaurants – Carpet Vacuuming and shampooing, cleaning dry floor surfaces/mats Lobbies – Clean carpets, stairs ways and maintain floor surfaces, walls, doors and windows(vacuuming, sweeping, mopping, buffing, polishing, shampooing) Restroom Locations (Guest and Cast)
- Completely clean, dry and disinfect all restroom fixtures and hard surfaces, including floors and fixtures Back of House Locations
- Clean and maintain off-stage support areas (offices, break rooms, restrooms, locker rooms) Area Wash down and Cleaning- Rinse/wash down all exterior Resort common walkways/hardscape areas and dry all exterior walkways and hardscape areas Pool Area – Clean and maintain pool deck and furniture Clean walls, doors, windows and ceilings in all areas Requires working with other departments to complete activities in a safe manner Restock all supplies as needed Includes the use of specialized floor cleaning Basic Qualifications : Flexible/Adaptable-may work in a variety of areas, conditions and/or have changing start/end times Proactive-immediately communicates concerns and reacts to situations Must use Personal Protective Equipment (i.e., boots, gloves, goggles, etc.), hand tools (i.e., mops, brooms, etc.), power equipment/tools and disinfectants, degreasing chemicals and all cleaning products Some roles require additional specialized training in both procedure and ergonomic principles Willing to get dirty and clean up others' messes Enthusiastic about interacting and helping guests Self directed and able to complete repetitious tasks while maintaining quality Preferred Qualifications: Enjoys cleaning Previous experience in a cleaning environment (previous housekeeping, kitchen/restaurant or other busy cleaning environments) Previous experience in a self directed role requiring little follow up /supervision Knowledge of Hawaiian/Japanese language preferred Additional Information : SCHEDULE AVAILABILTY Full Time
- Full availability is required seven (7) days per week, including early mornings, late nights, weekends, and holidays.

SUBMITTING YOUR APPLICATION After clicking "Apply for this job" below, the employment application will open in a new window.

Please complete ALL pages of the application by clicking "Next" on each page, then "Submit" on the final page.

Keyword: AulaniCasting, Aulani Casting The pay rate for this role in Hawaii is $32.95 per hour.

Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits, dependent on the level and position offered.

To learn more about our benefits visit:

*At Securian Financial the internal position title is Infrastructure Dir."

Mission

"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."

Positioning

The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.

This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.

• Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.

• Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.

• Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.

Scope of Accountability

Resilience Engineering & Cloud Reliability

• Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.

• Own resilience automation, chaos testing, and IaC-based recovery validation.

• Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.

Quality Engineering & Continuous Testing

• Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.

• Drive automation-first testing (functional, non-functional, performance, resilience).

• Embed observability-driven quality validation and contract testing across services.

Performance, Capacity & Efficiency Engineering

• Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).

• Partner with Platform & Infrastructure teams to tune performance across application and platform layers.

• Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.

Cross-Domain Architecture Collaboration

• Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.

• Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.

• Engage Data Architects for data resilience, replication, and pipeline reliability.

• Work with Business Architects to align technical reliability goals with critical business outcomes.

Leadership & Talent Development

• Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.

• Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.

• Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.

Core Technical Competencies

• AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.

• Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.

• Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.

• Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.

• Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.

• Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.

• Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.

• FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.

Leadership Competencies

• Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.

• Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.

• Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.

• Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.

• Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.

Qualifications & Experience

• 12+ years in cloud engineering, reliability, or platform leadership roles.

• 5+ years leading Sr. Managers/Managers in technical domains.

• Proven expertise across AWS, with working knowledge of Azure and GCP.

• Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.

• Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.

• Certifications:

  • Required: AWS Certified Solutions Architect - Professional

  • Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect

Success Metrics

• 99.9% availability maintained for Tier-1 workloads.

• 100% coverage of DR automation for Tier-1 services.

• 25% annual increase in automated quality/test coverage.

• 15% annual improvement in resource efficiency and cost performance.

• Documented resilience participation across all enterprise architecture blueprints.

• Positive "technical peer readiness" and succession rating from Head of REO.

Summary Value Proposition

This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.

It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space.

Our missions have direct impact to global security, like missile warning and Earth observation.

Our team is curious, bold and innovative.

We take risks, innovate and explore new techniques and technologies.

We influence change because we challenge the status quo.

And when we watch our satellites launch, we know each one of us made it happen.

Job Summary As a Mission Operations Engineer, you will be the lead technical authority for Millennium's on-orbit spacecraft.

Your work will encompass the entire spacecraft mission life cycle, from the proposal phase to spacecraft and mission design, through space vehicle integration and test, and culminating with launch and on-orbit operations.

You will be responsible for all facets of the mission design, including definition of operational concepts, development of on-orbit procedures, and innovation of advanced methods of spacecraft operation unique to each space mission.

Mission Operations requires composure in high-pressure situations, in-depth knowledge of both the space vehicles and ground segment, and an ability to respond to anomalous scenarios in real-time.

You will be directly responsible for Millennium's critical on-orbit assets.

This position's internal job code is Systems Engineer.

Our team is currently hiring for levels 3-4.

Responsibilities Lead a team of spacecraft and subsystem engineers during launch and early orbit activities to commission the space vehicle(s) for service Perform duties of lead technical authority during mission operations for both the space and ground segments Support every aspect of the mission lifecycle, from proposal/mission modeling, design, integration and test, space vehicle shipment, launch and on-orbit operations, to decommissioning Define ground and mission operations requirements, and flow mission requirements back to the space vehicle team Define mission concept of operation and design reference missions Improve future vehicle designs by cataloguing lessons learned from on-orbit exercises Support the ground segment design, including command and control, mission planning, mission data processing, and the associated infrastructure to support all activities Implement and test space vehicle fault and autonomy, including fault detection and response, autonomous space vehicle behavior, and on-board command and control Develop and implement methods of operational automation, to reduce day-to-day operator responsibilities Create and execute space vehicle simulator tests to validate mission/fault/autonomy design Create and execute in-factory flight vehicle tests to validate mission design compatibility with flight hardware Conduct critical ground segment testing, including radio-frequency compatibility testing, remote ground facility interface testing, and acceptance testing of critical ground assets/locations Forms and leads anomaly response team when off-nominal vehicle conditions arise Contribute to customer briefings/debriefings for orbital events Design and validate the mission "sequence of events" for bus commissioning, payload checkout/calibration, and mission operations Contribute to Mission Rehearsal events to train the mission team and to validate the mission design This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at one of the listed location options.

This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship.

A Final U.S.

secret clearance Prestart is required OR An interim and/or final U.S.

secret clearance Post Start is required Minimum Qualifications B.S.

in Aerospace, Electrical, Software, Computer, Mechanical Engineering, or related field Minimum of 3 years of experience in Mission Operations or similar Experience with real-time satellite command and control Working knowledge of satellite subsystems, ground systems, space missions, and CONOPS design Experience delivering operational products to customer environments Willingness to support occasional off-nominal working hours during critical 24/7 mission operations activities Experience in leading multidisciplinary technical teams, especially to resolve anomalous scenarios Active TS clearance and SCI eligibility Preferred Qualifications M.S.

in Aerospace, Electrical, Software, Computer, Mechanical Engineering, or related field Minimum of 3 years of experience in Mission Operations or similar Deep knowledge of satellite systems engineering, including all satellite subsystems Guidance, Navigation, and Control; Electrical Power; Thermal Control; Telemetry, Tracking, and Command; Propulsion; etc.

Experience with Spacecraft Command & Control software systems Familiarity with software and scripting tools such as MATLAB, Python, C/C++, Java, etc.

Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process Drug Free Workplace: Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift: This role will be on 1st shift Total Rewards: At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: Level 3: $99,000
- 177,000 Level 4: $121,000
- $215,000 Millennium is DDTC-registered, ITAR-compliant Company.

This position is located at a facility that requires special access.

Applicants MUST be U.S.

citizens and eligible for a security clearance.

Additionally, applicants must be willing to apply for and maintain a security clearance.

We Applications for this position will be accepted until Apr.

03, 2026 Export Control Requirements: This position must meet U.S.

export control compliance requirements.

To meet U.S.

export control compliance requirements, a "U.S.

Person" as defined by 22 C.F.R.

§120.62 is required.

"U.S.

Person" includes U.S.

Citizen, U.S.

National, lawful permanent resident, refugee, or asylee.

Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position.

Security Clearance This position requires the ability to obtain a U.S.

Security Clearance for which the U.S.

Government requires U.S.

Citizenship.

An interim U.S.

Top Secret/SCI Clearance Pre-Start and final U.S.

Top Secret/SCI Clearance Post-Start is required.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.aa415a4b-8b21-40fc-a65c-70d2b25ca29a

The Personal Injury Protection (PIP) Claim Supervisor oversees the operation of 5-7 Claim Representatives devoted to the handling of PIP Claims in multiple States. This position is responsible for planning the activities and monitoring the results of the team’s efforts to achieve assigned goals and objectives for production and quality.

You will interact with your staff through regular Team Meetings as well as one-on-one developmental sessions. You will partner with management in review of the department’s pending and provide training, file handling, and advice to claims associates on an everyday basis. The ideal candidate for this position will have management skills and functional knowledge of the NJ Automobile Insurance Cost Reduction Act.

This position requires superior time management and organizational skills. The individual in this role should have superior interpersonal skills. This individual will oversee motivating their team in addition to ensuring healthy, positive morale through interaction with the group. Insurance designations or continuing education efforts to obtain the same are desirable but not required. Medical terminology, and an understanding of anatomy are helpful but not necessary.

RESPONSIBILITIES

• Provides technical guidance and direction of Personal Injury Protection / No Fault claims.
• Provides reports of Team results along with a corresponding analysis of trends.
• Continuously analyze results and make recommendations for improvement, with a focus on continuous improvement of day-to-day operations.
• Promote teamwork through effective leadership.
• Maintain a high level of confidentiality and professionalism.
• Monitors and communicates the quality of work conducted by team members through completion of Quality Reviews.
• Monitors authority levels and reserve accuracy.
• Has strong communication skills and provides leadership through example.
• Objectively assess and manage performance. Regular meetings with staff members to review results in comparison to objectives and development plans is a requirement
• Must have strong critical thinking skills, the ability to exercise independent judgment and the ability to problem solve effectively.
• Evaluates performance of team members and conducts performance evaluations, mid-year reviews and objective setting.
• Monitors attendance and oversight of Human Resource concerns of the team.

QUALIFICATIONS

• Bachelor’s Degree (B.A.) from a four-year college or university is preferred; or equivalent combination of education and experience.
• 5+ years in NJ No-fault Insurance experience required with Three to five years management experience preferred.
• Knowledge of Pennsylvania No fault experience helpful but not required.
• Must have excellent verbal and written communication skills in both individual and team settings.
• Possess the ability to create workflow processes, standard operating principles, and training materials.
• Working knowledge of Microsoft Products (SharePoint, Visio, Excel, PowerPoint)
• Tableau Utilization preferred but not required.
• Prior experience/knowledge in a service center environment beneficial but not required.

SALARY RANGE

The pay range for this position is $90,000 to $122,000 annually. Actual compensation will vary based on multiple factors, including employee knowledge and experience, role scope, business needs, geographical location, and internal equity.

PERKS & BENEFITS

• 4 weeks accrued paid time off, 8 paid national holidays per year, and 2 floating holidays
• Low cost and excellent coverage health insurance options that start on Day 1 (medical, dental, vision)
• Annual 401(k) Employer Contribution
• Free onsite gym and health center at our Woodbridge Location
• Resources to promote Professional Development (LinkedIn Learning and licensure assistance)
• Robust health and wellness program and fitness reimbursements
• Various Paid Family leave options including Paid Parental Leave
• Tuition Reimbursement

ABOUT THE COMPANY

The Plymouth Rock Company and its affiliated group of companies write and manage over $2 billion in personal and commercial auto and homeowner’s insurance throughout the Northeast and mid-Atlantic, where we have built an unparalleled reputation for service. We continuously invest in technology, our employees thrive in our empowering environment, and our customers are among the most loyal in the industry. The Plymouth Rock group of companies employs more than 1,900 people and is headquartered in Boston, Massachusetts. Plymouth Rock Assurance Corporation holds an A.M. Best rating of “A-/Excellent”.

#LI-DNI

Aulani, A Disney Resort & Spa, is more than an enchanting, family-friendly destination. We've combined the spirit of O`ahu with the magic of Disney to create a place where guests and cast members alike can feel the magic, can feel the spirit of the island and can truly feel welcome. Here, you'll bring the spirit of the islands to life in every part of your role. Are you ready to join this team and make an impact?

Our Housekeeping Guest Service Manager team takes phenomenal pride in managing a team of experienced housekeeping professionals who ensure our guestrooms and accommodations are what our guests come to expect from Disney. You will lead a multifunctional housekeeping team to accomplish daily service of guestrooms, hallways and public areas to provide outstanding room experience and cleanliness both upon arrival and throughout a Guest's stay.This Full-time position reports to the Assistant Housekeeping Director and will be working onsite at our breathtaking Aulani resort on the island of Oahu, Hawaii.What you will do:Contribute to the operation daily, including working with guests and cast members and resolving any guest situationsMaintain employee focus to encourage and develop a diverse, multi-lingual teamRecognize cast members and hold them accountable for delivering excellence in safety, courtesy, show and efficiencyExceed guest expectations through achievements in guest satisfaction measurement scores, quality assurance scores, and other guest satisfaction measuresCoordinate and inspect daily cleaning assignments; provide feedback to ensure cleanliness, service and product quality standards are metPartner with the resort hotel front office and other teams to ensure delivery of clean and ready roomsConduct daily pre-shift breakout meetings to communicate relevant information to cast membersSupervise daily staffing levels and shift coverage needs

Support local projects and monitor supervise any potential impacts to the guest and cast experienceHere's what you'll need to be successful in this role:Minimum one year supervisory or managerial experienceMinimum one year working in a housekeeping rolePassion for service and commitment to safety awarenessExperience leading a multicultural team and a passion for developing othersGood verbal and written skills, along with problem-solving and decision-makingExperience leading in a team environment, holding self and others accountable, and the ability to deal with conflictOperational guest service experience and skillsProficiency in basic computer functions vital to operate in a Windows environment and other technologiesUnderstand the impact of financial aspects of an operation (i.e. operating budget, revenue, labor, inventory systems, costs)

Flexibility to work varied hours, including evenings, overnight, weekends and holidaysIt would be a plus if you also have these skills:Housekeeping experience working in a luxury hotelKnowledge of chemicals, materials, cleaning technique and equipmentKnowledge of Hot SOS

Multilingual skillsEducation is important to us, here is what we're looking for:Required: High School degree or equivalentBenefits and Perks: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities and special extras that only Disney can provide. Learn more about our benefits and perks at The hiring range for this position in Hawaii is $72,000 to $96,500. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.

Job Title: Manufacturing Product Engineer

Location: Chandler, AZ

Company Overview

Confidential aerospace manufacturing organization dedicated to delivering high-quality turbine components and driving operational excellence. The company fosters a culture focused on accountability, continuous improvement, and strong customer partnerships.

Position Summary

The Manufacturing Product Engineer is responsible for driving continuous improvement within the manufacturing process of investment vacuum cast turbine components. This role focuses on improving cost, lead time, and product quality across both new and existing product lines. The position ensures dimensional integrity that meets or exceeds customer requirements and works closely with production teams to optimize processes and resolve technical challenges.

This role regularly supports machine operators by clarifying specifications, approving methods, and providing process guidance to ensure high-quality output. Occasional customer interaction may be required.

Key Responsibilities

• Develop and implement quality control systems and production process improvements
• Analyze testing and inspection procedures to diagnose root causes and implement corrective actions
• Utilize metrology and statistical analysis to improve manufacturing quality and yield
• Support die and fixture design/modeling for investment casting patterns and finishing processes
• Train and coach employees on improvement methods and systems
• Review and disposition internal discrepant material reports and assist with MRB processing
• Respond to technical and quality-related questions from internal teams and customers
• Support scheduling, lead-time reduction, cost optimization, and outgoing quality initiatives
• Statistically analyze casting-related dimensional data (internal and external geometries) to drive process improvements
• Apply knowledge of CMM, ultrasonic inspection, dimensional gaging, and structured light 3D scanning
• Maintain understanding of gating, shrink factors (wax/metal), and process capabilities
• Utilize FMEA and APQP/PPAP methodologies
• Execute projects within aggressive timelines

Qualifications

• Bachelor's degree in Engineering or related technical field (or equivalent experience)
• 2–7 years of experience in quality systems within a manufacturing environment
• 2–5 years of investment casting industry experience strongly preferred
• Strong problem-solving skills using statistical analysis tools
• Solid understanding of quality principles, systems, and standards
• Ability to read blueprints and interpret GD&T
• Proficiency with CAD software (Unigraphics or SolidWorks preferred)
• Experience with DICUS Ballon software is a plus
• Strong communication skills, both written and verbal
• Organized, self-motivated, and capable of working independently or within team environments
• Proficiency in Microsoft Office (Word, Excel, Outlook, Project)

Additional Requirements

• Must be eligible to work in the United States
• Position subject to ITAR regulations (U.S. person status required)
• Visa sponsorship not available

Company Description

TraxNYC, located in New York City, specializes in crafting luxury jewelry that combines bold designs with exceptional quality. Renowned for its commitment to superior craftsmanship, personalized service, and timeless creations, the company is dedicated to delivering stunning jewelry pieces that exceed expectations. With a passion for excellent customer experiences, TraxNYC ensures a seamless process whether customers are purchasing custom jewelry or requesting expert repairs.

Role Description

This is a full-time, on-site role based in New York, NY, for a 3D Print & Wax Technician Assistant specializing in jewelry production. The responsibilities include assisting in the preparation and operation of 3D printing and wax production equipment, maintaining production schedules, and ensuring the accuracy and quality of printed designs. The assistant will also assist with routine maintenance of machinery and contribute to a collaborative production environment.

3D Printing & Wax Handling

• Assist with operating wax 3D printers (setup, start jobs, monitor prints)
• Remove, clean, and post-process wax prints carefully
• Inspect wax models for defects (cracks, layer issues, incomplete prints)
• Label, organize, and track wax models for casting

Production Support

• Prepare waxes for casting (spruing support, storage, handling)
• Maintain cleanliness and organization of print and wax stations
• Assist with printer maintenance (resin/wax refills, cleaning, basic troubleshooting)
• Track daily print jobs and report issues to senior technicians

Quality Control

• Ensure wax models meet quality standards before casting
• Follow proper handling techniques to avoid breakage or distortion
• Communicate print or design issues promptly

Documentation & Workflow

• Log print jobs, failures, and reprints
• Help maintain production schedules and timelines
• Follow standard operating procedures (SOPs) and safety guidelines

Qualifications

• High attention to detail
• Comfortable working with small, delicate components
• Willingness to learn jewelry production processes
• Reliable, organized, and punctual

Preferred(Nice to have)

• Experience with 3D printers (wax or resin)
• Jewelry manufacturing or casting experience
• Familiarity with CAD files or design workflows
• Experience working in production, manufacturing, or lab environments

Job Type: Full-time

Pay: $18.00 - $25.00 per hour

Expected hours: 40 – 50 per week

Benefits:

• Employee discount
• Paid time off

Ability to Commute:

• New York, NY 10036 (Required)

Work Location: In person

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company is looking forGuidance Navigation and Control Engineers (Associate, Experienced or Senior) to support the Flight Controls team in Everett and Renton Washington.

Position Overview:

We are seeking accomplished, self-motivated engineers to design, analyze, test, and certify flight control systems and components for large commercial aircraft. In addition to supporting production and fleet operations, you will be part of a team driving the development of new derivative airplanes and preparing for the next generation of more capable, efficient, and safer airliners.

This requisition includes multiple positions across various flight control disciplines, offering opportunities to contribute to a wide range of important and challenging projects. Our teams are currently hiring for a broad range of experience levels including Associate, Experienced and Senior Guidance Navigation and Control Engineers.

We foster a collaborative environment where every team member prioritizes safety and recognizes the profound significance of their contributions to the aviation industry. Our strong emphasis on teamwork and a robust safety culture is not just a value; it is essential to our mission. By cultivating a culture that values collaboration and safety, we ensure that our commitment to excellence resonates throughout our organization, ultimately enhancing the trust and confidence placed in us by those who fly. If you are passionate about making a difference and thrive in a dynamic environment where your contributions are recognized, we invite you to apply today and join our team!

Position Responsibilities:

• Resolve airplane level requirements into system level requirements and resolve system level requirements into component requirements with time and cost efficient validation methods.

• Develop and evaluate system and subsystem architecture alternatives to meet project objectives and requirements.

• Conduct trade studies to analyze and compare alternatives, rapidly converging on preferred configurations through system simulations and development test programs.

• Lead and participate in system, component, and detailed design efforts, ensuring thorough documentation and adherence to schedule and cost constraints to produce error-free, manufacturable specifications and drawings.

• Lead and support system- and component-level validation activities, including test plan development, consultation on iron bird and test rig setups, test monitoring, analysis, report authoring, supplier test report review and approval, failure analysis, and mitigation strategies.

• Drive certification efforts by creating required artifacts such as system safety analyses, failure modes and effects analyses (FMEA), and fault tree analyses (FTA); ensure traceability to regulatory requirements and resolve any regulatory conflicts.

• Support ongoing production by promptly addressing build issues at Boeing and supplier facilities, identifying and implementing design improvements to enhance build accuracy, production rate, and line safety, and resolving rejections, functional test failures, and flight squawks.

• Provide subject matter expertise to support global fleet operations, responding to airline and regulator inquiries, leading resolution of Service Related Problems (SRPs), and analyzing flight incidents to inform Safety Review Board (SRB) recommendations for the Continued Operational Safety Program (COSP).

• Collaborate effectively across functions and organizations within and outside Boeing, including manufacturing, avionics, crew operations, airplane safety, aerodynamics, supply chain management, BCA systems software, suppliers, airline customers, and regulatory agencies.

Work Authorization:

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Everett or Renton, WA.

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science.

• 1+ years of technical experience in an aerospace or similar regulated industry environment.

Preferred Qualifications (Desired Skills/Experience):

• 3+ years of related work experience or an equivalent combination of education and experience.

• 5+ years of related work experience or an equivalent combination of education and experience.

• Knowledge/Experience with ARP 4754 and ARP 4761.

• Experience with flight controls system and component architecture.

• Experience in requirements development, design, analysis, and verification & validation of flight control systems.

• Experience using requirement management tools such as IBM Rational DOORS.

• Experience with manufacturing regulated and certified, safety critical components and software.

• Experience with Systems Safety Analysis, failure modes and effects analysis; fault tree analysis; common cause analysis, and single & multiple failure analysis.

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union:

This is a union-represented position.

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range:

• Associate (Level 2): $100,000 - $136,000

• Experienced (Level 3): $124,000 - $168,000

• Senior (Level 4): $153,000 - $207,000

Additional Information:

• All information provided will be checked and may be verified.

Applications for this position will be accepted until Mar. 23, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.