Entry Level Software Engineer Jobs Remote Jobs in Usa

• 
  
• Initiates design documents for small projects and in support of large programs
  
• Develops design documents narratives
  
• Performs requirements analysis
  
• Develops Sequence of Operations / System Functional Documentation
  
• Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
  
• Develops Specifications
  
• Performs QA/QC and technical reviews of designs
  
• Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
  
• Comment Resolution
  

Mechanical-focused controls engineer (BAS/BMS)

• 
  
• Experience on EPMS monitoring
  
• Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
  
• Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
  
• Familiarity with Cisco network switch programming and design preferred
  

• 
  
• Lead programming / configuration team efforts for complex automation and SCADA applications.
  
• Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
  
• Testing / Troubleshooting / Deployment / Commissioning
  
• Author testing / commissioning procedures
  
• Preparation of test reports
  
• Originates test procedures
  
• Commissioning of deployed systems
  
• Development of test equipment and simulation devices
  
• Perform Factory and Field Testing
  

• 
  
• Perform troubleshooting on service calls to existing and legacy system operators
  
• Perform hardware / software upgrades and replacements on existing systems
  

• 
  
• Conducts any surveys, inspections, tours, etc. of client sites, as required
  
• Prepares cost estimates and supporting documents for small projects
  
• Perform hardware / software upgrades and replacements on existing systems
  
• Evaluation and pricing of change orders
  

• 
  
• Assigns technical tasks and coordinates with entry-level engineers
  
• Assigns tasks and coordinates with Technical Staff
  

• 
  
• Experience in reading electrical and control schematics and plans
  
• Experience in control system startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and machinist hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• 3-7 years' experience
  
• Bachelor's degree in engineering or higher
  
• Associate degree (add 3 years)
  
• High school diploma (add 5 years)
  
• Must be a US Citizen
  

• 
  
• Experience in computer networks
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software
  
• Standard Office Software (Microsoft Word, Excel, etc.)
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  
• Design Build Institute of America (DBIA)
  
• Engineer in Training (EIT) in relevant in field
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Do you enjoy being part of a team and take pride in your continuous development of transformational leadership skills? Are you looking for an opportunity to further build your technical knowledge through interactive training and development programs?

As a Lead Plumbing Engineer, you will have the opportunity to leverage your design expertise to drive successful execution of commercial plumbing and process piping projects. The Lead Plumbing Engineering will play a crucial role in mentoring fellow engineers, spearheading coordination efforts, and ensuring the seamless execution of design tasks across our projects.

What you will do

• Perform detailed calculations related to plumbing systems, including waste/water/vent, pipe sizing, water heater/boiler sizing, pump sizing, friction loss, etc.
• Utilize engineering principles to ensure the construction of efficient and effective plumbing designs.
• Collaborate with internal and external teams to lead design coordination efforts.
• Develop and review equipment schedules and submittals.
• Perform drafting in CAD and Revit software’s to implement design standards for plumbing and process piping projects.
• Prepare Title 24 Acceptance documents and Cal-Green documentation.
• Ensure adherence to plumbing codes and regulations.
• Assist with LEED certifications and related documentation.
• Generate plumbing system layouts and engineering designs for prospective projects and secured jobs.
• Produce deliverables such as drawings and specifications related to plumbing and process piping systems.
• Collaborate with detailers to ensure consistency and constructable of Revit models and shop drawings.
• Provide guidance and mentorship to junior or entry level engineers, offering technical expertise and serving as a resource throughout various stages of design projects.
• Participate in ongoing training and development to enhance skills as a design professional and remain updated on current plumbing system, technology, and current drafting / modeling best practices.
• Participate in the preparation of all project closeout as-built drawings.
• Assists in the annual review process for Plumbing Engineers, providing valuable feedback to leadership for future goal setting and development.
• Represent the company as a design professional during project team design meetings.
• Maintain a commitment to excellence and always act in the best interest of Silicon Valley Mechanical.
• Support the Plumbing department with other tasks and projects as business requires.

Education, Skills & Experience

• Bachelor’s degree in mechanical engineering or similar field preferred.
• 6+ years of experience in commercial plumbing design, piping design or similar field required.
• Proven experience with plumbing process piping design preferred.
• Ability to evaluate, provide diagnosis and necessary solutions on existing systems preferred.
• Demonstrates proficiency in atypical systems in the plumbing industry preferred.
• Demonstrated experience interpreting CA plumbing, mechanical, fire, and building codes required.
• Possesses an EIT certification a plus.
• Proficient in MS Office (Word, Excel, and Outlook), AutoCAD, Revit, and Bluebeam highly preferred.

Compensation & Company Benefits Include

This is a full-time exempt salaried position. The compensation for this role is $120,000 - $180,000 annually and is based on experience and skillset.

Health: Medical / Dental / Vision / Life & Disability Insurance / FSA

Well-Being: Robust Maternity & Paternity Leave / EAP / Paid Holidays / PTO / Interactive Breakroom

Financial Wellness: 401k w/ Employer Contribution / Employee Referral Bonus / “Positive Pulse”

Community Investment: Volunteer Opportunities / Team Building Activities / Employee Activities

Physical Requirements

As a Lead Plumbing Engineer in the Mechanical Contracting Industry, there are certain physical requirements you should be aware of. These requirements ensure that you are capable of performing the necessary tasks safely and effectively. Reasonable accommodations may be provided to qualified applicants who may not be able to fulfil certain aspects of the role. The key physical requirements for this role are outlined below:

• This role may involve physical activity including walking, standing, and driving while moving around the office and visiting construction sites to assess plumbing systems.
• This role may require reviewing and interpreting architectural drawings, schematics, and other technical documents related to plumbing system design.
• This role may require the use of computer design software and other tools to create accurate and detailed plumbing system designs.
• This role may involve working at a desk, computer, or standing for prolonged periods of time.
• This role may require clear verbal and written communication skills to effectively collaborate with team members, clients, and contractors.
• This role may require the use of personal protective equipment (PPE) during job walks and site visits.

Who We Are:

At SVM, we are more than just a leading mechanical contractor specializing in design-build commercial HVAC, plumbing, piping, service/maintenance, and 24-hour emergency services. We’re a team dedicated to supporting the Bay Area, Sacramento, and Nevada regions with trusted expertise and an unwavering commitment to delivering exceptional experiences at every level.

Our success is built on a collaborative culture that values teamwork, innovation, and doing the right thing. We take pride in fostering an inclusive and welcoming environment where every team member feels supported, valued, and empowered to grow. At SVM, we believe our people are our greatest asset, and we prioritize their development, well-being, and success.

Our state-of-the-art fabrication facility reflects our dedication to quality and efficiency. By leveraging cutting-edge 3D design and manufacturing technology, we detail and fabricate ductwork, piping, and pre-skidded equipment to execute projects with precision and excellence.

At SVM, we don’t just focus on work—we focus on balance. We encourage a life-work approach that allows our team to thrive both personally and professionally. We are committed to helping our team members grow, stay curious, and work collaboratively to tackle any challenge. With the support of peers, managers, and executive leadership, our team is equipped to succeed and build meaningful careers.

The statements above reflect the general nature and level of work expected for this role. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required. The company reserves the right to modify, add, or remove responsibilities as needed to meet business and organizational needs. Please sign below in acknowledgment and receipt of this document.

Job Title: Manufacturing Engineer

Location: Oshkosh, WI 54901

Duration: 12+ Months

Summary of Job:

The Associate Manufacturing Engineer is an entry-level engineering role responsible for designing new or improved components, tooling, and manufacturing processes to support production operations. The position works closely with plant engineering teams to introduce new products into manufacturing facilities, develop assembly tooling, and support prototype builds. This role provides hands-on engineering support while developing skills in manufacturing processes, CAD modeling, and product design.

Must-have/Required skills:

• Bachelor’s degree in Engineering (Mechanical preferred) or related field (strong candidates with an Associate’s degree may be considered)
• Experience with CAD modeling software and 3D design tools
• Strong mechanical engineering fundamentals
• Familiarity with mechanical design principles and material applications
• Ability to perform basic engineering calculations and technical analysis
• Strong analytical and problem-solving skills
• Ability to work collaboratively with engineering and manufacturing teams
• Proficiency with Microsoft Office Suite (especially Excel)

Key Responsibilities:

• Design new and improved components, tooling, and assembly fixtures, ensuring compliance with engineering standards
• Prepare vehicle layouts, detailed component drawings, and conduct basic engineering calculations
• Collaborate with plant engineering teams to identify tooling requirements for new products and support assembly floor implementation
• Generate bills of materials (BOMs), assembly drawings, and technical documentation
• Assist senior engineers with project tasks, process planning, and product introduction activities
• Utilize CAD and engineering software to support design, modeling, and analysis tasks

City of Kirkland

$8,599.14 - $10,115.01 Monthly

Kirkland, WA

Full-Time

202100730

Public Works - Capital Improvement

02/09/2026

Non-Exempt

AFSCME

The City of Kirkland's Public Works Department is seeking to hire a Temporary Associate Project Engineer!
Note: This position is classified as temporary and is currently funded through 12/31/2026.

Why Kirkland?

Ranked as one of the most livable cities in America, Kirkland is an attractive and inviting place to live, work, and visit. We have big city vision while maintaining a small-town, community feel. If you are a candidate with the desire to join an organization looking to innovate into the future, the City of Kirkland is the place for you!

If you ask our employees why they love where they work, they will tell you about the great people, work environment, supportive leadership and City Council, and fearless innovation.

We also invest in you!

Competitive Wages: We strive to maintain competitive compensation packages and work to provide wages that meet the knowledge, skills, and abilities of our employees.

Awesome benefits: The City offers benefits that are unmatched by most other employers. Please click on the benefits tab above to view more details.

Childcare Programs: To help address the challenge of reliable childcare, the City of Kirkland has agreements with two local childcare providers that offer discounted rates for our employees at 10 locations within 20 miles of Kirkland. Learn more!

Training and Career Development: The City of Kirkland believes in developing it's employees. You will have access to training opportunities designed for career development and advancement based on your position, skills, and interests.

Job Summary

Entry level engineer/project construction administration providing support to the Capital Improvements Project Team. Assists experienced engineers/coordinators in developing project criteria, studies, plans, specifications, providing calculations, tracking budgets, reviewing construction documentation, and communication related to City Capital Projects.

Principal Accountabilities
Entry level non-supervisory engineer/construction administration. Reports to the Capital Projects Supervisor for coordinated work with experienced engineers and coordinators. Accountable for the follow tasks:

• Assists in various phases of City Capital Improvement Project work including contract administration, project management documentation, public outreach and accounting.
• Supports dissemination of project information to other City Groups and Divisions.
• Aids in the recording of construction records documentation.

Essential Functions

• Supports dissemination of project information by preparation of exhibits.
• Helps gather stakeholder requirements for technical specifications to promote quality assurance.
• Performs field reconnaissance when/as required.
• Assists staff in the review of construction documents including plans, specification and construction management documents through all stages of Public Works projects.
• Works with experienced engineers/coordinators and other staff to coordinate and document field changes.
• Maintains knowledge of current construction codes and changes in industry standards related to construction material and procedure developments.
• Aids in the preparation of project status reports for proper coordination and scheduling of projects.
• Assists with final acceptance report upon project completion.

Peripheral Duties

• Coordinates field activities of City projects with private and public utilities within Kirkland.
• Works with Maintenance and Operations on engineering issues.
• Reviews traffic control plans with the Traffic Engineer.
• Responds to public inquiries or complaints relating to construction activities, standards, administrative procedures, and requested improvements.
• Provides public counter and back-up telephone coverage. Provides information regarding the policy of the City in response to inquiries.
• Assists in maintaining and updating Kirkland Pre-Approved Plans for the Public Works Department.
• Conducts field inspection on an as needed basis to assist inspection staff when workload or absences dictate.
• Maintaining the CIP Group's Lessons Learned file.
• Performs other duties as assigned.

In the event of a civic or civil emergency, position will provide assistance as determined by the City's emergency operations program.

Must possess effective written and oral communication skills, with the ability to work with staff, the public and general contractors in a knowledgeable and professional manner. Must have proficient research and documentation skills.

Minimum Qualifications

• A Bachelor Degree in Engineering, Construction Management or related field; or a combination of education and/or training and/or experience which provides an equivalent background that may be substituted as equivalent.
• Proficient in use of all office equipment including personal computers and related software applications.
• Valid Washington State driver's license.

Working Conditions
Primarily office work, but duties will require some field work both in street rights-of-way and on construction sites under varying weather conditions.

Selection Process

Position requires a resume and cover letter for consideration of application. Please note how you meet minimum qualifications within the cover letter. Applicants who are selected for next steps in the hiring process will be invited by phone or e-mail. Candidates are encouraged to apply at the earliest possible date as screening, interviewing, and hiring decisions will be made through the recruitment period, until such time as the vacancy is filled.

The City of Kirkland is a welcoming community where every person can thrive and grow. We value diversity, inclusion, belonging, and work together to support our community. We do this by solving problems, focusing on the customer, and respecting all people who come into the City whether to visit, live, or work. As an Equal Opportunity Employer, we are committed to creating a workforce that does not discriminate on the basis of race, sex, age, color, sexual orientation, religion, national origin, marital status, genetic information, veteran status, disability, or any other basis prohibited by federal, state or local law. We encourage qualified applicants of all backgrounds and identities to apply to our job postings. Persons with a disability who need reasonable accommodations in the application or testing process, or those needing this announcement in an alternative format, may call or Telecommunications Device for the Deaf 711.

Michelin is hiring!

- - - - - - - - - - - -

This opportunity is in Woodburn, Indiana in our BF Goodrich tire plant. Woodburn is a small town located about 30 mins east of Fort Wayne, IN. Fort Wayne is the cultural and economic center of northeastern Indiana and the second largest city in Indiana. Established in 1961, our plant makes passenger and light truck tires.

THE OPPORTUNITY

Michelin has an immediate opening for an Electrical / Automation Engineer to lead, design, and implement electrical and automation solutions to improve our performance in safety, quality, productivity, delivery, cost, and innovation. Michelin's purpose is to support everyone's right to move freely to find their better way forward. Innovation and performance open mobility opportunities to people who were limited geographically or economically before. Entry level training is provided by Michelin and will include formal classes and on-the-job mentoring under an experienced area expert. If respect for people, teamwork and trust are some values you live by you should consider joining us, the Worldwide leader in Tires!

Michelin / BFG is a global tire manufacturing company in the middle of an exciting digital transformation, with a vision of factory of the future using advanced robotic technology and data-driven engineering solutions. We are seeking a highly skilled and motivated Automation Engineer to join our BFG Manufacturing Engineering team near Fort Wayne, Indiana. As an Automation Engineer, you will play a crucial role in designing and implementing automation solutions that drive efficiency and productivity across our manufacturing operations. You will be responsible for leading projects from conception to completion, collaborating with cross-functional teams to develop innovative solutions that leverage advanced technologies such as smart material handling, robotics, AGV, ASRS, vision systems, machine learning and artificial intelligence.

WHAT WILL YOU DO

• Conduct pre-studies, prototypes, and pilots to capture business requirements and determine the best solutions in terms of costs/benefits, deadlines, risks, and functional capabilities.
• Design, build, and lead implementation projects to improve plant performance by replacing outdated systems, improving existing equipment, or adding new innovations to make progress.
• Implement and monitor actions necessary to mitigate risks (calculations, simulations, tests, etc.)
• Implement best practices for automation design and development, including worldwide sharing of best practices.
• Develop and maintain relationships with suppliers, vendors and contractors.
• Stay up-to-date with emerging trends and technologies in automation.
• Provide detailed electrical design and automation programming for assigned projects.
• Provide estimates and technical schedules for all phases of process equipment addition, replacement or upgrade.
• Provide backup support and training to plant maintenance teams on new automation systems that they implement.

Additional for Senior Level

• Start to finish technical Project Management including risk, schedule, budget, and resources.
• Lead/Participate in system approvals, qualification, and validation of industrial robustness.
• Manage change requests, approvals, and change testing.
• Assist local technicians in troubleshooting and root cause analysis as needed.
• Interface with internal company support groups to accomplish objectives and provide contract engineering management and direction when needed.

WHAT WILL YOU BRING

• Bachelor's degree in Electrical Engineering, Automation, or related field, or equivalent technical experience.
• Ability to set and achieve goals with minimum supervision.
• Success in working with other people or a team to meet a common objective.
• Developed/implemented team or group project plans that met or exceeded expectations.
• Demonstrated attention to detail and data accuracy in previous work.
• Experience with electrical design standards and able to complete controls systems designs using standard CAD design tools.
• Knowledge of PLC programming standards & programming software, including GRAFCET, Ladder Logic, and Structured Text. Specific experience with Rockwell / Allen Bradley is a must, with Siemens being a plus.
• Experienced with controls systems network interfaces and various protocols for communications between devices including computer system databases.
• Experienced with Variable Frequency drives and Motion Control technologies. Specific experience with Rockwell, Siemens and Control Techniques is a plus.
• Experienced with HMI configuration, programming, and communication. Specific experience with Rockwell is a plus.
• Experience with electrical design standards and ability to complete power and controls system designs using standard CAD design tools.

Additional for Senior Level

• Minimum 2-5 years' experience in a similar role or 5-7 years in a manufacturing maintenance area.
• Able to prioritize and handle multiple projects simultaneously.
• Ability to work well under pressure and handle strict deadlines.
• Develop and maintain technical documentation for automation solutions.
• Analyze and troubleshoot complex technical issues related to automation solutions.
• Ability to mentor and train junior engineers
• Proven experience in project management, from conception to completion
• Strong understanding of procurement, installation, commissioning, and programming of automation systems
• Strong experience with PLC programming
• Vision System configuration and interface for width measurement applications and defect detection applications is preferred, but not required. Specific experience with Cognex, Keyence, Adept, Bytewise, Gocator is a plus.
• Robotic experience, configuration or knowledge is preferred, but not required. Specific experience with Fanuc or Yaskawa is a plus.
• Experience with advanced robotic technologies such as AGV, ASRS, vision systems, machine learning and artificial intelligence

Join our team and be a part of our global digital transformation journey towards factories of the future. If you have a passion for automation, project management and advanced robotic technologies, we encourage you to apply today. We care about giving people a better way forward as we manufacture the future.

#LI-HIRINGMICHELIN

#LI-RM1

Inspire Motion for Life: Apply Today!

As the leading mobility company, we work with tires, around tires and beyond tires to enable Motion for Life. Dedicated to enhancing our clients' mobility and sustainability, Michelin designs and distributes the most suitable tires, services and solutions for our customers' needs. Michelin provides digital services, maps and guides to help enrich trips and travels and make them unique experiences. Bringing our expertise to new markets, we invest in high-technology materials, 3D printing and hydrogen, to serve a wide a variety of industries-from aerospace to biotech. Headquartered in Greenville, South Carolina, Michelin North America has approximately 23,000 employees and operates 34 production facilities in the United States and Canada.

MICHELIN tires have been ranked the #1 Tire Brand across major categories and segments by industry experts and consumers alike. For nearly three decades we've been recognized for our achievements in Customer Satisfaction, Performance, Durability, Technology and Innovation.

Michelin cares for the personal and professional development of its employees. We support career advancement through various options, which include: skill and career development, training, career exploration and work with cross-functional teams. We offer the possibility of a varied and fulfilling career path in an environment where unique contributions are valued.

Michelin offers 10 Business Resource Groups (BRGs) which are all-inclusive groups created and led by employees who have shared life experiences across various diversity dimensions. Each group supports business strategies and initiatives along with meeting the needs of members. The goal of each group is to help employees feel welcome and included, support employee engagement and encourage professional development. BRGs also provide cross-cultural support, career management resources and opportunities for community involvement.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

Get in the driver's seat and be on your way to a meaningful professional journey!

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

THE OPPORTUNITY

Michelin has an immediate opening for a Quality Process Engineer who will be responsible for leading and handling optimization of their designated manufacturing process within our facility. Michelin's purpose is to support everyone's right to move freely to find their better way forward. Our consistent high quality contributes to vehicle safety, cost of ownership, tire performance, and a reduction in Greenhouse Emissions. Entry level training is provided by Michelin and will include formal classes and on-the-job mentoring under an experienced area expert. If respect for people, teamwork and trust are some values you live by you should consider joining us, the Worldwide leader in Tires!

This opportunity is in Woodburn, Indiana in our BF Goodrich tire plant. Woodburn is a small town located about 30 mins east of Fort Wayne, IN. Fort Wayne is the cultural and economic center of northeastern Indiana and the second largest city in Indiana. Established in 1961, our plant makes passenger and light truck tires.

WHAT WILL YOU DO

• *Ensure product and process quality by monitoring performance/testing, conducting diagnostic tests, setting standards, and confirming consistency with the standards.
• Apply hands on technical troubleshooting skills to existing processes with quality problems.
• Lead the application of root cause analysis in problem solving/deviation from standards.
• *Follow up on process capability take part in ensuring permanent improvements are made.
• Mentor production operators and other team members to improve application of manufacturing standards and reaction in the event of deviation.

WHAT WILL YOU BRING

• Experience in industrial, manufacturing, maintenance, engineering, project, or related technical experience is a plus. For Entry Level, this can include internship, Co-op, apprentices, military service, or similar programs.
• Ability to interact in a professional manner with suppliers, customers, and colleagues.
• Proven attention to detail and data accuracy in previous work.
• Success in working with other people or team to meet a common objective.
• *Effective problem-solving skills to analyze, find the root cause, and implement solutions to eliminate/reduce the risk of the problem happening again.
• B.S. Degree in Mechanical, Chemical, Material Science Engineering or other technical degree is required.
• Proficient in the use of Microsoft Office Suite (Word, Excel, PowerPoint) and ability to learn other software systems.

#LI-EO2

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.

• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.

• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.

• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!

Akkodis is seeking an Industrial Engineer for a Contract job with a client in Carson, CA. Ideally looking for applicants who can provide Industrial Engineering support and coordination during the development of aircraft interior components and will be responsible for determining most cost-effective methods to create products. Focal for industrialization on each new program.

Rate Range: $32/hour to $35/hour; The rate may be negotiable based on experience, education, geographic location, and other factors.

Qualifications:

Specialized knowledge

Collaboration – Establishes collaborative relationships to achieve objectives

Communication – Excellent interpersonal and communication (written and verbal) skills

Ability to work independently and follow through on assignments with limited direction; ability to work within and lead in a team oriented environment

Excellent attention to detail.

Project and general management experience

Experience in manufacturing line set-up

Self-motivated and multi-tasker; able to level load own workload.

Level 1 Qualifications:

Education: BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering.

Experience: 0-3 years.

Computer Skills: Proficient with Windows Operating System®, Office XP®, AutoCAD.

Other Skills: Experience with airworthiness regulations desired. Basic Knowledge of Primary processes like CNC machining, Layup and Crush Core. Ability to work well independently and cross-functionally.

Description: Entry-level position within job field.

Level 2 Qualifications:

Education: BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering

Experience: 4-5 years.

Computer Skills: Proficient with Windows Operating System®, Office XP®., AutoCAD. Knowledge of design software

Other Skills: Experience with airworthiness regulations & LEAN tools such as valve stream mapping (VSM) “5S”. Strong Knowledge of Primary processes like CNC machining, Layup and Crush Core.

Description: Intermediate-Mid Level position within job field.

If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at 61 or

Equal Opportunity Employer/Veterans/Disabled

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client.

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

· The California Fair Chance Act

· Los Angeles City Fair Chance Ordinance

· Los Angeles County Fair Chance Ordinance for Employers

· San Francisco Fair Chance Ordinance

Hello,

I hope you are dong well, Tech-Consulting is looking for Dynamic Entry Level Mobile Developer in Atlanta, GA. We are scouting talent in though US. Gel Along!

Job Title: Junior Mobile Developer

Experience: 0–2 years

Location: Atlanta, GA

Employment Type: Full-time

Job Overview

We are looking for a motivated Junior Mobile Developer to join our development team. You will assist in building, testing, and maintaining mobile applications for Android and/or iOS platforms. This role is ideal for someone who is passionate about mobile technologies and eager to learn from experienced developers.

Key Responsibilities

Assist in developing and maintaining mobile applications.

Write clean, efficient, and maintainable code.

Collaborate with UI/UX designers, backend developers, and product teams.

Debug and fix issues in existing applications.

Participate in code reviews and team meetings.

Test applications to ensure performance, quality, and responsiveness.

Stay updated with the latest mobile development trends and tools.

Required Skills

Basic knowledge of mobile development frameworks such as:

Flutter

React Native

Android Studio

Xcode

Programming knowledge in:

Dart

Java

Kotlin

Swift

JavaScript

Understanding of REST APIs and JSON.

Basic knowledge of Git version control (e.g., GitHub).

Familiarity with mobile UI/UX principles.

Good problem-solving and communication skills.

Qualifications

Bachelor’s degree in Computer Science, Software Engineering, or related field (or equivalent experience).

Internship or project experience in mobile app development is a plus.

Overview

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech

Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:

1. Students are our top priority.

2. We strive for excellence.

3. We thrive on diversity.

4. We celebrate collaboration.

5. We champion innovation.

6. We safeguard freedom of inquiry and expression.

7. We nurture the wellbeing of our community.

8. We act ethically.

9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

The Campus Engineering team exists to provide support to all aspects of design, construction, operation, and maintenance of campus facilities. Campus facilities include not only the buildings which are occupied by our students, faculty and staff, but it also includes central campus utility plants and the associated utility systems, including chilled water, steam, power, and natural gas

During the design process, first, our Team creates and maintains the design standards for building systems, including HVAC, plumbing, power distribution, and lighting. These standards are used by us, and by our outside consultants, to guide the design efforts of new buildings and renovation projects. Our team is also responsible for reviewing the design documents created by the consultants to ensure that their designs comply with standards.

During construction projects, our Team is often called upon to provide advice related to unforeseen conditions which are discovered during demolition work. We often provide a second review of material and equipment submittals, as well as shop drawings. On most campus construction projects, the day-to-day interaction with the contractor is managed by our co-workers within one of the Construction teams. However, on a few projects we may be called on to manage those day-to-day contractor activities.

Post construction, and throughout the life of the facilities, our team serves to provide advice to our Operation & Maintenance teams, and our Utilities Maintenance team, when a problem grows larger than their capacity. We also plan and prepare the way for projects to replace equipment as it nears the end of life. We are always looking ahead for opportunities to increase efficiency and resiliency in the systems.

If you have experience in this type of work, please consider applying to join our Team.

Provide basic electrical engineering services in support of either the operation and maintenance of the campus electrical distribution system or the design, construction and operation of electrical equipment, components or systems associated with research efforts within an academic or research unit. This position will interact on a consistent basis with: facilities management and utilities personnel or research management and faculty; co-workers, vendors, suppliers and contractors. This position typically will advise and counsel: management personnel. This position will supervise: NA.

Job Duty 1 -
Perform basic design and installation of electrical electrical/electronic components

Job Duty 2 -
Review and provide input to engineering plans and specifications for electrical systems

Job Duty 3 -
Perform basic troubleshooting associated with electrical systems; may involve calibration and repair work.

Job Duty 4 -
Prepare drawings, schematic diagrams and related documentation associated with electrical components and systems

Job Duty 5 -
Monitor expenses incurred; prepare related reports

Job Duty 6 -
Interact with vendors regarding procurement and delivery issues

Job Duty 7 -
Perform other duties as assigned

Educational Requirements
Bachelor's Degree in Electrical Engineering or equivalent combination of education and experience

Other Required Qualifications
Computer knowledge: ability to search for data, input/edit information, word processing, design custom reports; software knowledge includes Windows, Excel, MS Word and PowerPoint. Position has responsibility for formally representing the voice of the constituent/customer to Georgia Tech and is vital to effective marketing and communications by the Institute.

Required Experience
0-2 years of job related experience

Additional Preferred Qualifications
Engineer in Training (EIT) or Professional Engineer (PE)

Preferred Educational Qualifications
Additional Bachelor's Degree in other Engineering discipline or Master's Degree in applicable field, or State Trade License in any applicable field

SKILLS
This job requires entry professional level knowledge and skills in the application of electrical engineering principles, processes and practices. Skills in application of regulations, codes and safety practices associated with electrical systems is required as is the use of office and engineering/technical related computer applications, databases and systems.

The University System of Georgia is comprised of our 25 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.

Job Code: S5

Pay Range Starting At: $49,894.00 - $67,855.00

Location: Atlanta, GA

Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening