Engineering Structures Login Jobs Full Time Jobs in Hell, MI

Electrical Systems Engineer – High Voltage Vehicle Systems

Location: Troy, MI

Job Type: Full-Time

Hiring Partner: Raizan Solutions LLC (Authorized hiring partner – We do NOT charge candidates)

About the Client

Our client is an engineering and manufacturing company specializing in advanced battery systems, high-voltage power distribution, ruggedized energy systems, and custom electrification solutions. They support OEM, commercial vehicle, specialty, and defense customers with rapid prototyping and production-intent system development.

Raizan Solutions LLC is recruiting on behalf of this client. We act solely as the hiring partner and do not charge candidates any fees.

Position Summary

The Electrical Systems Engineer will lead and support the development of high-voltage battery systems, power distribution architectures, and vehicle-level electrical integration. This role spans system design, requirements, embedded controls coordination, safety analysis, and hands-on prototype validation.

You will collaborate closely with mechanical, controls, software, and manufacturing teams to deliver robust systems through the full development cycle—from concept to system launch.

Key Responsibilities

Electrical & System Design

• Design and document electrical architectures, schematics, wiring diagrams, and component selections for Li-ion battery systems, HV distribution, and vehicle integration.
• Develop and maintain system requirements, interface definitions, DFMEAs, PFMEAs, DVP&R, and system test plans.
• Apply strong engineering knowledge of HV components: contactors, switches, HVIL, insulation, isolation monitoring, safety interlocks, bus bars, sensors, and protective devices.
• Support PCB/hardware development efforts (Altium preferred; OrCAD or equivalent considered).

Controls & Software Integration

• Coordinate with controls and software teams on system behaviors, state machines, protection logic, and calibration.
• Support embedded controls development using MATLAB/Simulink/Stateflow, model-based design, and C-based integration review.
• Use CAN tools (Vector CANalyzer, CANape) to evaluate control systems, validate functionality, and troubleshoot issues.

Testing, Validation & Debug

• Develop validation test procedures for system-level and component-level verification.
• Perform hands-on prototype testing, fault evaluation, root-cause analysis, and troubleshooting of high- and low-voltage systems.
• Follow lab and vehicle test procedures to evaluate system performance, safety interactions, and functional behavior.

Program & Cross-Functional Coordination

• Work with internal team members and external suppliers to ensure successful design, build, and validation.
• Participate in recurring technical review meetings to identify risks, integration issues, and quality concerns.
• Assist in project planning—tracking timing, risks, status, and technical deliverables.

Documentation & Build Support

• Generate and coordinate build documentation, assembly instructions, inspection sheets, and test records.
• Support prototype build reviews, manufacturing handoff, and initial production readiness.

Qualifications

Education

• Bachelor’s degree in Electrical Engineering, Controls, Computer Engineering, or Mechatronics from an accredited institution.
• Equivalent experience will be considered.

Experience

• 5–15 years of experience in electrical or systems engineering for EV, hybrid, automotive, heavy vehicle, or defense systems.
• Proficiency in electrical system architecture, safety concepts, and requirements flow-down.
• Experience with:
• MATLAB/Simulink/Stateflow
• LabVIEW
• Vector CANalyzer / CANape / CAN tools
• SPICE / PSpice
• Controls platforms (MotoHawk, dSPACE, ETAS preferred)
• Hands-on experience with high-voltage battery systems, inverters, DC-DC converters, BMS, and vehicle electrical integration.
• Familiarity with EV industry standards, ISO 26262 concepts, and relevant military or commercial vehicle standards (preferred).
• Experience with PCB design tools (Altium) is a plus.

What You Bring

• Strong analytical and problem-solving skills.
• Ability to manage multiple technical tasks in a fast-paced, hands-on environment.
• Excellent communication, collaboration, and documentation capabilities.
• A proactive mindset with strong attention to detail.

Why Join This Opportunity

• Work on cutting-edge battery systems, high-voltage electrification, and ruggedized energy products.
• Be part of a small, agile engineering environment with meaningful technical ownership.
• Exposure to diverse projects and close collaboration with customers and leadership.
• Competitive compensation and opportunities for long-term growth.

Apply Today

If you’re ready to help drive the future of advanced electrified systems and thrive in a collaborative, hands-on engineering environment, Raizan Solutions LLC would be happy to connect.

Who we are:

LER TechForce is an industry leader in embedded controls, software, functional safety, and engineering IT talent. For over 20 years LER has been working with customers across North America to meet their engineering resource challenges.

This is a full-time direct position.

Our client in Troy, MI is seeking an Account Manager to manage strategic relationships with automotive OEM customers and drive business growth for our portfolio of automotive audio systems, antennas, and cable solutions.

The role is responsible for RFQ management, commercial negotiations, and customer coordination throughout the program lifecycle, acting as the main interface between the customer and internal teams.

Key Responsibilities

• Manage and develop relationships with assigned automotive customers worldwide.
• Act as the primary commercial contact for all customer-related matters.
• Lead the RFQ (Request for Quotation) and offer preparation process in coordination with engineering and program teams.
• Negotiate pricing, development costs, tooling investments, and commercial terms within internal guidelines.
• Coordinate customer meetings, kick-off meetings, and program reviews.
• Monitor program milestones including SOP (Start of Production) and EOP (End of Production).
• Support business development activities and identify opportunities for new programs.
• Prepare sales forecasts, budgets, and customer portfolio analysis.

Requirements

• Bachelor’s degree in Business, Engineering, or Automotive-related field.
• 5-10+ years of experience in automotive sales or key account management with experience selling automotive electronics, connectivity, or audio systems.
• Experience working with automotive OEMs or Tier-1 suppliers.
• Strong negotiation, communication, and customer management skills.
• Ability to work in a cross-functional and international environment.
• Proficiency in CRM/ERP systems and Microsoft Office.

Minimum 3 years of Purchasing Experience

Venteon is currently seeking an experienced Buyer to fill an opening with a Manufacturing Company located in Metro Detroit. Must have experience with purchasing automotive plastics and exteriors.

Requirements of the Buyer

• 8+ years of experience in Procurement, Supply Chain, or Engineering within automotive or related manufacturing industries.
• Strong experience sourcing injection-molded plastic components and exterior automotive systems.
• Deep knowledge of small-to-large tonnage injection molding processes and tooling cost structures.
• Experience managing or establishing direct resin procurement strategies.
• Ability to quickly identify cost drivers in injection-molded parts, including tooling, materials, processing, and supplier margins.
• Proven experience negotiating commercial agreements and supplier contracts.
• Strong analytical and problem-solving skills with the ability to support cost modeling and supplier benchmarking.
• Experience supporting vehicle program launches and meeting automotive program timing milestones.

Benefits of the Buyer

• Competitive salary and benefits
• Full-time, direct-hire position
• Paid time off
• Medical / Dental / Vision
• 401k

Responsibilities of the Buyer

• Develop and execute sourcing strategies for exterior plastic components, injection-molded parts, and direct resin procurement.
• Build and manage a strategic global supply base for exterior systems and plastic commodities.
• Lead supplier RFIs, RFQs, commercial negotiations, and sourcing decisions to meet cost, quality, and program timing targets.
• Manage the end-to-end sourcing process to support program milestones and Job 1 launch readiness.
• Negotiate piece price, tooling, and commercial terms for injection molded exterior components and resin supply agreements.
• Work cross-functionally with Engineering, Supplier Quality, Manufacturing, and Program Management to resolve cost, quality, and delivery issues.
• Identify cost drivers in molded plastic components including tooling, resin material, cycle times, and manufacturing processes.
• Drive cost reduction initiatives, value engineering, and supplier productivity improvements.
• Monitor supplier performance and ensure compliance with Slate’s Global Terms & Conditions and commercial agreements.
• Analyze internal and market data to support sourcing decisions and deliver the best overall value to the organization.

HCLTech is looking for a highly talented and self-motivated 3DExperience Architect to join it in advancing the technological world through innovation and creativity.

Job Title: 3DExperience Architect

Job ID: 68964

Position Type: Fulltime

Location: Dearborn, MI

Key Responsibilities

PLM Architecture & Configuration

• Architect, configure, and customize ENOVIA 3DExperience PLM solutions to support enterprise-level product lifecycle management requirements.
• Perform data modeling, attribute creation, schema modifications, and configuration of ENOVIA business objects.
• Evaluate and optimize PLM system performance, scalability, and integration readiness.

Technical Development

• Develop and maintain PLM customizations using MQL, TCL, JPO, XML, and SQL.
• Create integrations with CAD tools such as Creo and SOLIDWORKS.
• Design and implement SOA services, REST/SOAP APIs, and web services for seamless integration with CAD, ERP, MES, and legacy enterprise systems.

Process Enablement & Engineering Support

• Support engineering and manufacturing teams by mapping and configuring PLM solutions aligned with:
• Engineering processes
• BOM (Bill of Materials) Management
• Change Management (ECR/ECN workflows)
• Manufacturing process planning
• Configuration and variant management

Migration & Data Transformation

• Lead and execute PLM data migration activities from legacy systems to 3DEXPERIENCE using:
• 3DEXPERIENCE Transition Assistant
• EDAT (Engineering Data Assessment Tool)
• DBDI (Database Data Import)
• XPDMXML framework
• Ensure data integrity, validation, reconciliation, and smooth transition into production environments.

Collaboration & Documentation

• Work closely with cross‑functional teams including Engineering, IT, Manufacturing, and Program Management.
• Create detailed technical specifications, design documents, test plans, and user guides.
• Provide training, troubleshooting, and technical support to internal teams and stakeholders.

Required Skills & Qualifications

• Strong expertise in ENOVIA 3D Architecture and 3DEXPERIENCE PLM configuration.
• Experience with MQL, TCL, JPO, XML, SQL, and familiarity with CAD tools (Creo, SOLIDWORKS).
• Solid understanding of SOA architecture, system interfaces, and enterprise application integration.
• Deep knowledge of Engineering + Manufacturing processes, including BOM, revisions, configurations, and workflows.
• Proven experience with data migration tools and PLM data transformation mechanisms.
• Excellent problem-solving, communication, and collaboration skills.

Pay and Benefits

Pay Range Minimum: $114000 per year

Pay Range Maximum: $175000 per year

HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to for investigation.

Compensation and Benefits

A candidate’s pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year.

How You’ll Grow

At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

Manufacturing Supervisor

Location: Twin Lake, Michigan

Employment Type: Full-Time

Position Summary

The Manufacturing Supervisor provides technical leadership supporting manufacturing operations within a high-volume casting environment. This role leads engineering initiatives focused on improving throughput, reducing inventory, lowering operating expenses, and driving continuous improvement across manufacturing processes and automation systems.

This position combines technical expertise, leadership, and cross-functional collaboration to ensure consistent product quality aligned with customer specifications while advancing operational excellence.

Key Leadership Roles

Primary Responsibilities

• Provide technical leadership to Manufacturing Engineering and Automation teams
• Lead and mentor manufacturing and automation engineers
• Establish engineering priorities aligned with production, quality, and business objectives
• Collaborate with Quality, Maintenance, Production, and Supply Chain teams to resolve technical challenges
• Develop, implement, and optimize casting processes
• Drive root cause analysis and corrective actions for process deviations or yield issues
• Apply Lean Manufacturing and Six Sigma methodologies to reduce waste and improve throughput
• Lead initiatives focused on cellular manufacturing and labor cost reduction
• Identify and implement advanced technologies including automation, additive manufacturing, and AI-driven process monitoring
• Evaluate equipment upgrades and automation opportunities to improve process control and efficiency
• Document technical work, prepare technical reports, and maintain engineering standards

Basic Qualifications

• Bachelor’s Degree
• Minimum 5 years of experience in a manufacturing engineering role

Axios Professional Recruitment is seeking a Manufacturing Engineer to join a leading manufacturer in Greenville, Michigan.

The Manufacturing Engineer will support high-end refrigeration product lines, playing a key role in driving operational excellence, improving manufacturing processes, and leading continuous improvement initiatives. This individual will partner cross-functionally with engineering, operations, quality, and supply chain teams to ensure efficient production, cost control, and alignment between product design and manufacturing capabilities.

Responsibilities:

• Coordinate and lead staff training initiatives, ensuring effectiveness and proper documentation (primary focus of role)
• Develop, implement, and maintain detailed work instructions to support Bills of Materials (BOMs) and engineering documentation
• Collaborate with Quality and Engineering teams to support technical training and process improvements
• Lead manufacturing projects, including assembly line relocations and new production line setup
• Assist in production layout design and optimization in a lean manufacturing environment
• Participate in new product development to ensure manufacturability, efficiency, and proper production flow
• Evaluate processes, conduct time studies, and track efficiencies to identify continuous improvement opportunities
• Develop and present recommendations to improve safety, quality, delivery, and cost
• Communicate Engineering Change Notices (ECNs) and act as a liaison between production and engineering
• Support equipment maintenance, capital planning, and new equipment justification
• Manage purchasing of tooling, equipment, and production supplies
• Ensure compliance with OSHA, EPA, and safety regulations
• Partner cross-functionally with operations, maintenance, engineering, quality, and leadership teams

Qualifications:

• Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering (or equivalent experience)
• 5+ years of experience in a fast-paced manufacturing or assembly environment
• Hands-on experience working on the production floor
• • Strong project management mindset with the ability to drive initiatives to completion
• Experience with lean manufacturing and production layout design
• Proficiency in CAD software (SolidWorks preferred)
• Strong communication and cross-functional collaboration skills
• Proficiency in Microsoft Office (Excel, Word)

Working Conditions:

• Full-time, on-site position based in Greenville, Michigan
• Split work environment between office and shop floor (approximately 50/50)
• Standard Monday–Friday schedule with additional hours as needed
• Fast-paced, team-oriented manufacturing environment
• Axios Professional Recruitment—an entirely employee-owned company—is the largest independent employer in West Michigan. Our mission is to match people with meaningful, long-lasting, and enjoyable careers, not just a job. Since 1988, we’ve helped match over 300,000 professionals with top employers across West Michigan.

Axios Professional Recruitment—an entirely employee-owned company—is the largest independent employer in West Michigan. Our mission is to match people with meaningful, long-lasting, and enjoyable careers, not just a job. Since 1988, we’ve helped match over 300,000 professionals with top employers across West Michigan.

Job Title: Purchase Buyer

Location: Auburn Hills, MI 48326

Duration: Direct-Hire/ Full-Time

Note:

• Needs 10% travel.
• Hourly position with a potential of overtime

Job Description:

• Our company is seeking a motivated Purchase Buyer to join our team. As the purchase buyer, your primary responsibility will be to follow & maintain Purchase SOP, be accountable for routine executions, cost control & escalations.
• Be responsible for domestic & International Sourcing for Automation and Logistic Automation and for developing domestic and global supplier base and monitoring supplier accounts payables.
• Commodities to be handled by team such as PLCs, Industrial PCs, Sensors, Switchgear, Scanners, Light Curtain, Cables, Cords, controllers, vision system, IT purchase, Pneumatics, Hydraulics, Motors, Gearbox, Servo, Screw Jacks, Tools, Bearings, chains & sprockets, Aluminum Extrusions, Hand tools, Hardware, Manufacturing (Machining & Fabricated items including surface finish like painting or Powder coating.
• Sourcing of Global & Local Trade / Labor for in-house & on-site installation & commissioning

Job responsibilities:

Supplier Management & Review

• Review & evaluate Suppliers' business account of Class 'A' & 'B'
• Alternate sourcing / ensure development of substitute for each commodity Procurement
• Review Indent, prioritize urgencies & initiate procurement process
• Ontime Procurement at optimum cost
• Resolve queries related to procurements with Stores & Accounts on daily basis
• Responsible for Procurement of Capex & maintain & monitor compliance record of on time actions
• Utilization / liquidation efforts on Excess inventory

Inventory Management

• Analyze & define Reorder level
• Achieve adequate inventory management by suggesting nearest alternative available in excess, cost effective, alternates (makes).
• Compliance
• Ensure SOP compliance & resolve points / queries raised
• MIS
• Review of Pending PO report on weekly basis & PO Vs GRIR report on monthly basis
• Update Goals & Achievement Folder for KRAs on weekly basis

Minimum Requirements:

• 5 years of experience
• Bachelor's degree in supply chain management or in mechanical engineering or electrical engineering
• Proficiency in MS Office, ERP SCM
• Troubleshoot supply chain issues by reviewing available options, identifying root causes, and implementing the most effective corrective actions.
• Proven capability to manage multiple priorities and deliver results within demanding timelines.
• Ability to take ownership of assigned tasks and work independently with minimal supervision.
• Proven team player who contributes positively to team culture, communication, and shared goals
• Negotiation and Analytical skills
• Proactive thinking and forecasting skills
• Periodic travel to suppliers along with client sites

Company Description

SCHERDEL North America is part of the globally recognized SCHERDEL Group, a family-owned company with approximately 6,800 employees across 46 locations worldwide. The SCHERDEL Group specializes in metal-forming, with expertise in producing engineering springs, vehicle components, and products for the medical market. Renowned for innovation and high-quality manufacturing, the company prioritizes excellence and sustainability in its operations.

Role Description

This is a full-time, on-site role for a Lean Coordinator at SCHERDEL North America, based in Muskegon, MI. The Lean Coordinator will be responsible for implementing and sustaining lean management principles, developing continuous improvement processes, and driving operational excellence across company operations. Additional responsibilities include analyzing data, utilizing lean tools, managing improvement projects, and collaborating with cross-functional teams to achieve organizational goals.

Qualifications

• Strong understanding and application of Lean Management, Lean Tools, and principles of Operational Excellence
• Proficiency in Project Management to oversee and execute improvement initiatives effectively
• Exceptional Analytical Skills to evaluate processes, identify areas for optimization, and interpret data-driven insights
• Proven ability to work in cross-functional teams and manage change in a collaborative environment
• Excellent organizational and time management abilities
• Knowledge of the manufacturing or metal-forming industry is an advantage
• Bachelor's degree in Industrial Engineering, Business, or a related field is preferred

Founded in 1991, Merlo Construction is a leading specialty contractor in the construction industry, known for a commitment to quality, safety and innovation. Merlo Construction has evolved from a small concrete contractor into an organization that offers a vast scope of work including demolition, earthwork, utilities, concrete foundations, site concrete and more! This diverse range of services saves customers time, energy, and cost when evaluating several subcontractors on the same project. Our team works out of a newly built office in Brighton, providing a welcome space that supports teamwork, connection, and day-to-day collaboration.

The Project Manager/Estimator Position

The Project Manager/Estimator works directly with the Division Manager and leads the project team from conception to completion by preparing cost estimates, handling quantity take-offs and submitting proposals. Upon successful bid, the PM/Estimator handles operations duties including project budgets, scheduling, and procurement.

Collaboration with staff is key to ensuring projects are bid accurately and completed according to specifications. The Project Manager/Estimator position offers the opportunity to be both hands-on and collaborative in the implementation of new processes, while living up to Merlo’s Value Statement of “What got us here, won’t get us there!”

Experience, Skills, and Abilities of the Project Manager/Estimator

• Bachelor’s degree in construction management, civil engineering, or related field
• A minimum of 2 years of Construction Estimating or Operations experience is required
• Specialty subcontractor construction experience is preferred
• Strong desire to actively contribute to a continuous improvement environment

Compensation, Benefit & Structure for the Project Manager/Estimator

This full-time position offers a competitive base salary and benefits package, including bonus opportunities, health insurance, paid time off, 401(k) with employer match, professional development opportunities, and a team-based worked environment.

Advantages of working with the family-oriented contractor include the opportunity to be involved in projects that impact the overall success of the company, daily interaction with senior leadership, team building events, and the ability to learn and grow within the Company.

Merlo Construction is an Equal Opportunity Employer!

Electrical Project Executive | Data Center Construction

Ann Arbor, MI | Traveling

Seeking an experienced Electrical Data Center Executive to lead the development of a Hyperscale Data Center build in Ann Arbor, MI. This individual will be responsible for leading the business unit with full profit and loss accountability, while ensuring excellence in safety, quality, and client satisfaction.

This role will lead the Hyperscale Data Center Development Project, overseeing the leadership team and driving the strategic success of projects through full completion. Responsibilities include building strong partnerships and collaborating closely with clients, subcontractors, and general contractors throughout the project lifecycle.

This is a stepping-stone opportunity that offers significant career growth as the company continues to expand its Mission Critical Division Nationally with a leading ENR Electrical Contractor.

Key Responsibilities

• Lead and manage large-scale Hyperscale Data Center construction projects
• Ensure safe work practices, quality standards, and strong financial performance
• Drive client development and long-term business growth
• Mentor, develop, and lead project teams
• Oversee contracts, estimating, risk management, and project execution
• Directly supervise large teams through full strategic execution to ensure client satisfaction

Qualifications

• Master’s degree in Construction Engineering & Management (or equivalent experience)
• 12+ years of experience in electrical construction with a proven track record of success
• 8+ years of experience in Data Center construction, including 5+ years at a senior level
• Strong leadership, communication, and organizational skills
• Proficiency in Microsoft Office, project management, and estimating software
• PMP, OSHA 30, and state electrical license preferred
• Willingness to travel full-time as required

This is an Executive-level role for a professional passionate about growing a Data Center division, with a strong background in electrical construction and a commitment to exceptional standards in safety, client relationships, and the delivery of profitable, high-quality projects.

Candidates must be located in an area with access to a major airport for travel.

646-396-5018