Engineering Jobs in Pa Remote

General Description: We are seeking a Sr. Electrical Engineer (PE Required) for our Chadds Ford or Philadelphia office! The Senior Electrical Engineer shall be engaged in projects involving, but not limited to, the design of facility related electrical distribution systems, interior and exterior lighting, low voltage systems (security, communications, data systems), and emergency backup systems. They will participate in and support project teams to undertake the design and delivery of services related to design and construction of electrical systems, as well as the overall project. This position shall be responsible to Project Manager(s) and the local Operations Manager.

Essential Functions:

• Functions as Project Manager, Lead Electrical Engineer, and/or Senior Electrical Engineer on a variety of assignments with electrical design scope and other disciplines. Role may vary based on size, complexity, and location of the projects.
• Ensures coordinated design on projects.
• Participates in the design development of electrical work.
• Creates and reviews drawings, technical specifications.
• Contributes to estimation of projects, planning and construction feasibility.
• Participates in the development of design drawings.
• Able to provide advisory information during the construction phase.
• Able to perform site surveys and contributes to engineering studies.
• Attends and contributes to office, client and project meetings.
• Participates in the monitoring of project production and schedules to ensure projects are completed on schedule and within budget.
• Participates and ensures the quality of the work produced maintains high standards.
• Performs engineering studies.
• Performs technical and coordination check-review of project documentation and drawings.
• Follows up on issues with design and production staff to resolve problems and concerns.
• Participates in internal project meetings on a regular basis, including being responsible for minutes.

Secondary Functions:

• Related duties as assigned.
• Supports applicable requests as needed.
• Lends support to all business areas outside of electrical focus as needed.
• Duties as assigned by Operations Manager or Regional Director.

Qualifications

Education/Experience Minimum:

Bachelor's degree in Electrical Engineering. PE Required. Minimum of eight (8) to ten (10) years' experience in a technical and management capacity reflecting increasing responsibility.

• Ability to drive and maintain a safe driving record.
• Valid state driver's license (any in US).
• In possession of appropriate paperwork to gain and maintain employment in the US.
• Ability to pass pre-hire drug testing and background check(s).
• Ability to meet worksite security requirements including FBI and State Police criminal background checks and DHS threat assessment evaluations.

Needed Skills:

• Proficient in project/task management.
• Ability to create and maintain productive relationships with employees, clients, and vendors.
• Understanding of principals of A/E industry.
• Strong knowledge of National Electrical Code (NEC), NFPA Life Safety Codes, and applicable local building codes.
• Working experience with software: Revit and AutoCAD, Visual, GenSize and SKM Power Tools.
• Good communication and negotiations skills.
• Good leadership skills.
• Ability to multi-task.
• Ability to prioritize tasks.
• Detail and safety-oriented.
• Excellent written and spoken English.

Right Traffic

At Right Traffic, our mission is simple but critical: we keep people safe. We are a leader in the traffic control industry, providing the essential services and advanced technology that protect work crews, motorists, and communities across the region. From major highway projects to local utility work, our team is the trusted partner that ensures every worksite is secure and every person gets home safely at the end of the day. We are looking for a driven sales professional who shares our commitment to safety and wants to make a tangible impact.

The Opportunity: Own Your Territory, Drive Our Growth

We are seeking a self-motivated and experienced Regional Sales Account Manager to join our dynamic team. This is your opportunity to take full ownership of a sales territory, building lasting relationships with key clients in the construction, utility, and municipal sectors. You will be the face of W.D. Wright (one of Right Traffic's entities), acting as a trusted safety and logistics partner to your clients. You will spend your time in the field, on job sites, and meeting with decision-makers—not behind a desk.

If you are a strategic "hunter" with a passion for consultative selling and a proven track record in a related industry, we want to talk to you.

Please note: This is a hands-on, individual contributor role focused on sales execution and territory growth, with no direct reports to yourself.

What You'll Do (Responsibilities):

• Develop and execute a strategic territory plan to identify new business opportunities and achieve ambitious growth targets.
• Serve as a trusted safety and logistics partner for our clients, from initial site walk and needs analysis to project completion.
• Proactively hunt for new business by prospecting, cold calling, and networking within the construction, engineering, and utility industries.
• Cultivate and deepen relationships with existing accounts, ensuring high levels of customer satisfaction and identifying opportunities for upselling and cross-selling our full suite of services.
• Become an expert on our services and technology, including MOT/TCP design, smart work zone solutions, and specialized equipment.
• Conduct compelling sales presentations and product demonstrations that articulate the value and safety benefits of our solutions.
• Prepare and present professional proposals, negotiate contracts, and successfully close new business.
• Collaborate with our operations team to ensure a seamless transition from sale to service delivery, guaranteeing client expectations are met and exceeded.
• Maintain an accurate and up-to-date sales pipeline in our CRM system and provide regular reports on sales activity and forecasts.

What You'll Bring (Qualifications):

Required:

• A minimum of 3-5 years of successful outside sales experience, preferably in a territory-based role.
• Demonstrated experience selling to the construction, utility, public works, or a related industrial sector.
• A verifiable track record of meeting and exceeding sales quotas as an individual contributor.
• The ability to operate with a high degree of autonomy and self-motivation; you are a natural self-starter who can manage your own schedule and pipeline effectively.
• Excellent communication, negotiation, and interpersonal skills, with the ability to build rapport and credibility with everyone from a project foreman to a company executive.
• Comfortable and credible on active construction sites and in industrial environments.
• A valid driver’s license and a clean driving record.
• Proficiency with CRM software (e.g., Salesforce, HubSpot).

Preferred:

• Specific experience in the traffic control industry.
• Familiarity with reading construction plans or traffic control plans (TCPs).
• ATSSA or other relevant traffic safety certifications are a major plus.

Compensation & Benefits:

Why Join Right Traffic?

We are more than just a company; we are a team dedicated to a vital mission. We invest in our people, providing them with the training, tools, and support they need to succeed and grow. At Right Traffic, you will find:

• A Culture of Safety and Integrity: Our values are not just words on a wall; we live them every day on every job site.
• Opportunity for Growth: We are committed to professional development and provide clear pathways for career advancement within our growing organization.
• A Collaborative Team: You will work independently in your territory but will be supported by a strong operational team dedicated to delivering on the promises you make to your clients.
• The Chance to Make a Real Impact: The work you do will directly contribute to the safety of our communities and the success of critical infrastructure projects.

If you are ready to take control of your career and join a winning team with a purpose, apply today!

Right Traffic is an Equal Employment Opportunities Employer encouraging diversity in the workplace. All qualified applicants will be considered without regard to their nationality, ethnicity, gender, race, color, religion, sex, sexual orientation, gender identity, age, disability, marital status, pregnancy, genetic information, veterans, or military status.

Recent engineering grad looking to gain experience and knowledge within the medical device industry?? This is the perfect opportunity to get your foot in the door and grow your career with one of the largest global medical technology companies in the world! Apply now and join us and discover an environment in which you’ll be supported to learn, grow and become your best self!

Job Summary:

Under the supervision of the Manufacturing Engineering Manager, the Manufacturing Engineer is responsible for supporting manufacturing by managing & executing assigned projects. This individual will serve as the technical lead on projects and will plan, schedule, organize, and drive completion of project activities. The Manufacturing Engineer is responsible for supporting manufacturing by developing, qualifying, implementing and maintaining manufacturing equipment, processes and procedures.

Job Responsibilities: (Primary Duties, Roles, and/or Authorities)

• Assist CTW (cost saving efforts)/continuous improvement initiatives.

• Generate actionable cost savings/continuous improvement ideas.

• Serve as the technical lead for projects.

• Lead technical project execution.

• Develop assembly and test procedures. Create written instructions. Review with document users & update as necessary based on review comments.

• Develop and maintain specifications and procedures for manufacturing, test and inspection processes.

• Develop, create and qualify manufacturing and test equipment.

• Coordinate with divisional and plant functional groups to evaluate and implement changes to products & processes.

• Communicate status of changes to functional groups as well as plant management.

• Evaluate projects

• Develop and maintain specifications and procedures for manufacturing, test and inspection processes.

• Responsible for designing and developing processes to optimize process flow, reduce variability, improve operating capabilities, and ensure operator safety.

• Responsible for creation/update of PFMEA/Risk analysis.

• Identify need for validation of manufacturing equipment/process and support systems to meet product requirements, regulations, quality and company policies.

• Lead the validation/qualification effort for equipment and processes (IQ, OQ & PQ).

• Maintain working knowledge of company policies and procedures, ISO and FDA requirements.

• This job description is not a comprehensive listing of activities, duties or responsibilities that are required of the employee for their job. Duties, responsibilities, and activities may change at any time with or without notice to support the business.

Education and Experience:

• Bachelor’s degree in an engineering discipline.

Preferred: Experience in a manufacturing environment in a regulated industry, medical device.

Knowledge and Skills:

• Experience with troubleshooting electromechanical systems.

• Excellent communication (verbal & written) and interpersonal skills

• Ability to read and understand mechanical drawings and electrical schematics.

• Detail oriented with high level of problem solving and analytical skills

• Familiarity with project management methodologies. Experience with leading technical projects preferred.

• Experience working closely with design engineering, quality engineering and production personnel.

• Familiarity with FDA regulatory requirements, GMP, ISO, lean, process validation and six sigma methodologies.

Immediate need for a talented Specialist 2, Quality Assurance. This is a 12+ Months Contract opportunity with long-term potential and is located in Fort Washington, PA (Onsite). Please review the job description below and contact me ASAP if you are interested.

Job ID:26-07042

Pay Range: $22 - $32/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location).

Key Responsibilities:

• Responsible for maintaining quality records, assisting with corrective action plans, and supporting quality system improvements.
• Support work orders review and confirm area cleanliness after maintenance interventions.
• Collaborate with cross-functional teams to implement innovative quality assurance protocols on the shop floor, ensuring seamless production flow and minimal defects.
• Utilize data-driven insights to proactively identify potential quality issues and develop creative solutions to enhance product reliability.
• Engage in hands-on inspection of products, applying a keen eye for detail to uphold stringent quality standards.
• Performs batch records review and cleaning records review to ensure product availability.
• Support work orders review and confirm area cleanliness after maintenance interventions.
• Performs area walkthroughs to ensure audit readiness at all times.
• Contribute to continuous improvement initiatives by suggesting and piloting novel QA methodologies tailored to dynamic manufacturing environments.
• Document and communicate quality findings through clear, concise reports that facilitate swift decision-making and process optimization.
• Maintain accurate and timely quality records related to product inspections, nonconformance, and project outcomes.
• Assist in documenting, monitoring, and following up on corrective and preventive action plans to ensure their effective implementation and closure.
• Respond to routine inquiries regarding technology transfer and improvements in manufacturing processes.
• Collect, organize, and analyze data to prepare detailed reports for assigned quality processes.
• Document and implement improvements to quality systems and standard operating procedures, including maintaining SOPs for interactions with contract manufacturers.
• Gather and maintain documentation required for audits and inspections to ensure inspection readiness.
• Support special quality projects and contribute to continuous quality improvement initiatives.

Key Requirements and Technology Experience:

• Skills-Bachelor’s degree or equivalent qualification in Engineering, Quality Management, Science or a related field demonstrating foundational technical knowledge.
• 2 years of practical experience or internships in quality assurance, manufacturing, or related operational environments.
• Strong attention to detail and ability to maintain accurate documentation.
• Basic understanding of investigations and automation processes.
• Ability to collect, organize, and analyze data effectively.
• Good communication skills to respond to routine technical inquiries.
• Ability to work independently.
• Ability to work night shifts and weekends.
• Strong analytical mindset with the ability to interpret complex data and translate it into actionable quality improvements.
• Excellent communication skills to effectively collaborate with diverse teams and articulate quality concerns innovatively.
• Familiarity with quality systems, audits, and inspection readiness.
• Proactive learner with a passion for adopting emerging QA technologies and methodologies to drive shop floor excellence.
• Proactive approach to supporting special quality projects and continuous improvement.

Our client is a leading Pharmaceutical Industry and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration.

Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

Position Description

Immediately hiring a Permanent Full Time Master Level Diesel Technician to support our Truck Fleet at Ryder in New Stanton, PA

For More Info Call Misty or Text "New Stanton T4" to 9

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $38.34 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: $5000
  
  
• Schedule: Monday - Friday
  
  
• Hours 3:00 pm - 11:30 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

For More Info Call Misty or Text "New Stanton T4" to 9

We have all the benefits other Shops do without the wait!

• 
  
• Annual Merit Pay Increases Every Year
  
  
• On the Job Paid Training
  
  
• Medical, Dental, Vision, 401 K etc. Start at 30 Days
  
  
• We love our Ryder babies and offer 12 weeks of PAID Maternity Leave for qualifying employees (eligibility requirements, including work tenure, apply)
  
  
• Paid Time Off Starts Accruing at DAY ONE with 80 hours per year
  
  
• Additional Day Off for U.S. Military Veterans
  
  
• 401 K offers a company match
  
  
• HIGH VALUED Stock at 15 % Employee Discount
  
  
• PPE, UNIFORMS, AND BOOT ALLOWANCE PROVIDED
  
  
• Ryder Top Technician Recognition Programs rewards 12 Top Techs each year with Cash Prizes from $250 to $50,000!
  
  
• Technician Tuition Repayment Program up to $5,000! Ask your recruiter about it today!
  
  

Click Here to See All Ryder Careers:

For More Info Call Misty or Text "New Stanton T4" to 715-212-8533

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up to $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Diagnostics and repairs, including AC, electrical systems
  
  
• Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, required
  
  
• Four (4) years or more Relevant work experience, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• All other certification as required by location, required
  
  

ADDITIONAL REQUIREMENTS:

• 
  
• Ability to perform all T3 tasks
  
  
• Must have demonstrated advanced analytical and repair skills in vehicle maintenance
  
  
• Effective interpersonal communication skills
  
  
• Must have basic computer skills: PC, Windows, mouse, etc.
  
  
• Must be able to lift up to 50 pounds
  
  
• Must be available to work shift work/weekends and on call duty as required
  
  
• Prefer ASE Certification in PM, Brakes, A/C, electrical, Electronics or ASE Master Mechanic
  
  
• Required to operate shop computers and diagnostic test equipment proficiently
  
  
• Must have minimum tool requirement
  
  
• Must road test vehicles as necessary
  
  
• Demonstrated ability to coach/mentor/influence others
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Additional requirements may be required in different locations and/or accounts.

Responsibilities

• 
  
• SBTIII trained within 180 days (SBT220)
  
  
• Complete all OEM on-line diagnostic scan tool software courses as required by location fleet mix. (completed within 365days)
  
  
• Complete Instructor led OEM courses as required to support location fleet mix.
  
  
• Performs vehicle maintenance and repair duties including:
  
  
• Performs standard vehicle maintenance
  
  
• Performs preventive maintenance
  
  
• Performs complex repairs with minimal (if any) support.
  
  
• Demonstrate the ability to access and use internal and external maintenance documents
  
  
• Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable.
  
  
• Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns.
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task.
  
  
• Instructs and advises other technicians regarding maintenance repair procedures and diagnostics
  
  
• Coaches/Mentors other level technicians
  
  
• Advise shop management and other technicians on shop repairs
  
  
• Utilizes key functions of Shop Management System and electronic documentation available
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)
  
  
• Other support duties as required to support operations. These could include but are not limited to Service Island support.
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 1 week ago (3/11/2026 4:33 PM)

Requisition ID 2

Location (Posting Location) : State/Province PA

Location (Posting Location) : City NEW STANTON

Location (Posting Location) : Postal Code 15672

Category Technicians/Service Employees6

Additional Locations (use this field to indicate if position can be domiciled in several areas) US-PA-PITTSBURGH | US-PA-Connellsville | US-PA-LATROBE | US-PA-Mt Pleasant

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000068

Min Pay USD $38.34/Hr.

Max Pay USD $38.34/Hr.

Job Summary:

The Maintenance Planner’s primary job function is to plan and coordinate activities for the Maintenance Department. Drives to maintain the work order backlog at an acceptable level and works with other team members in the department to minimize unplanned production downtime.

Essential Functions:

1. Plan and coordinate activities for the Maintenance Mechanics: PM’s, Work Orders, Project Work,

etc. using CMMS software (Limble)

• Serves as Primary Administrator of the CMMS software (Limble)
• Coordinate with Maintenance Clerk on procurement and kitting of parts for planned work.
• Maintain and improve Adhesives Research manufacturing facilities, support systems and equipment.
• Support change controls and capital projects in conjunction with Quality, Operations, Process Engineering, and Project Engineering.
• Lead, facilitate, and champion process optimization and continuous improvement projects designed to promote top line growth opportunities through: equipment reliability, PMs, work order closures, and safety improvements
• Self-motivated and self-disciplined with the ability to work independently and with minimalsupervision

1. Write change controls as required per SPAR 7233
2. Write planned deviations and non-conformances for PM’s as needed
3. Supports the area managers and supervisors with key metrics, identifies and implements continuous improvement actions; makes identifiable and substantial contributions to improving equipment reliability, PMs, and facility cleanliness
4. Interface with external equipment vendors, engineering companies, contractors, and customers
5. Ability to handle multiple projects concurrently
6. Represent the organization in a professional and positive manner to associates, external customers, and vendors
7. Conform to Company policies and procedures, Quality Systems, cGMPs, ISO, OSHA, etc.
8. Perform and/or support maintenance duties as needed.
9. Coordinate engineering capital projects as well as contractor work projects
10. Ensures compliance with all relevant regulations (e.g. ISO, FDA, OSHA, EPA, DEP, etc.) and company procedures

Additional Responsibilities:

• Performs other duties and responsibilities as assigned.

Job Specifications:

• Minimum of a high school diploma or equivalent
• Strong background in maintenance planning/coordinating work flows
• Previous maintenance supervisory experience a plus
• Minimum of 10 years experience in maintenance
• Experience / knowledge of Lean Manufacturing practices and principles
• Experience with Computerized Maintenance Management System (CMMS)
• Strong mechanical aptitude and analytical ability
• Computer literacy with good working knowledge in Excel, Word, and PowerPoint

• Bachelor’s Degree (BA/BS) in Chemistry or a related pharmaceutical science, with at least 5+ years of experience in analytical method development and validation, or
• Master’s Degree (MS/MA) with a minimum of 3+ years of relevant industry experience
• Extensive knowledge of cGMP, FDA/ICH guidelines, and regulatory standards (USP, Ph. Eur.)
• Hands-on experience with analytical instruments such as HPLC, GC, and familiarity with data acquisition software (Empower, Chemstation)
• Proficiency in laboratory management systems (Labvantage or equivalent) and Microsoft Office Suite
• Strong communication skills, with the ability to write clear reports and collaborate effectively with teams
  
  

• Experience with method transfer, stability studies, and troubleshooting
• Knowledge of DEA regulations and controlled substances handling
• Prior mentorship or training experience in analytical sciences
• Additional familiarity with reverse engineering, compatibility, and degradation studies
  
  

• Bachelor’s or Master’s degree in Chemistry or relevant pharmaceutical sciences
• 3 to 5+ years in a pharmaceutical analytical R&D setting, focusing on method development, validation, and regulatory compliance
  
  

• Ability to perform physical tasks including walking, standing, lifting up to 50 pounds, and working at various elevations
• Commitment to maintaining a safe, compliant laboratory environment and adhering to SOPs and regulatory guidelines
  
  

Founded over 35 years ago, First Quality is a family-owned company that has grown from a small business in McElhattan, Pennsylvania into a group of companies, employing over 5,000 team members, while maintaining our family values and entrepreneurial spirit. With corporate offices in New York and Pennsylvania and 8 manufacturing campuses across the U.S. and Canada, the companies within the First Quality group produce high-quality personal care and household products for large retailers and healthcare organizations. Our personal care and household product portfolio includes baby diapers, wipes, feminine pads, paper towels, bath tissue, adult incontinence products, laundry detergents, fabric finishers, and dishwash solutions. In addition, we manufacture certain raw materials and components used in the manufacturing of these products, including flexible print and packaging solutions.

Guided by our values of humility, unity, and integrity, we leverage advanced technology and innovation to drive growth and create new opportunities. At First Quality, you'll find a collaborative environment focused on continuous learning, professional development, and our mission to Make Things Better.

We are seeking a Product Development Scientist for our First Quality Retail Services facility located in Lewistown, PA.

The position is responsible for creating, developing, and implementing new and proprietary designs of absorbent-related product systems based upon business, customer, and consumer needs as well as provide support for the needs of present product systems to assure competitive performance and value.

Responsibilities include:

• Participate as a member of the Product Development team; execute projects in timely, diligent, safe, and professional manner, and contribute to the growth of the team and department.
• Design new products and product improvements to meet business and consumer needs.
• Develop new and improved materials and technologies with suppliers, and ensure all new raw materials obtain proper safety testing and clearance.
• Use basic Design of Experiments (DOE) techniques to develop experimental plans.
• Support the existing business product cost improvements through product redesigns.
• Provide technical support to reduce consumer complaints.
• Support corporate proprietary technology by documenting and patenting novel ideas.
• Develop new test methods to better predict and understand product performance in use.
• Work with more senior scientist or manager to help set project objectives.
• Coach and develop indirect reports to enhance team performance towards department objectives.

Education and experience requirements include:

• Able to travel ~20-30% to US and International for product and process trials.
• Four-year technical degree (e.g. Chemistry, Chemical Engineering, Mechanical Engineering) or equivalent; additional business studies preferred.
• 3+ years in R&D inventing, developing and implementing new products.
• Knowledge of and experience with developing product systems for the retail market, preferably hygiene products
• Knowledge of materials used in retail absorbent products (e.g. pulp, super absorbent polymers, nonwovens).
• Working knowledge of consumer product converting technologies for pulp, paper and nonwoven materials.
• Experience with the process of searching, evaluating and filing patents.
• Experience providing direction for the physical testing of hypotheses, resulting in specific conclusions and recommendations.
• Able to speak, read and write the English language and have strong oral and written communication skills.
• Good analytical skills, with working knowledge of basic statistics.
• Good computer skills in Microsoft Office program.

What We Offer You

We believe that by continuously improving the quality of our benefits, we can help to raise the quality of life for our team members and their families. At First Quality you will receive:

• Competitive base salary and bonus opportunities
• Paid time off (three-week minimum)
• Medical, dental and vision starting day one
• 401(k) with employer match
• Paid parental leave
• Child and family care assistance (dependent care FSA with employer match up to $2500)
• Bundle of joy benefit (years' worth of free diapers to all team members with a new baby)
• Tuition assistance
• Wellness program with savings of up to $4,000 per year on insurance premiums
• ...and more!

First Quality is committed to protecting information under the care of First Quality Enterprises commensurate with leading industry standards and applicable regulations. As such, First Quality provides at least annual training regarding data privacy and security to employees who, as a result of their role specifications, may come in to contact with sensitive data.

First Quality is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, sexual orientation, gender identification, or protected Veteran status.

For immediate consideration, please go to the Careers section at to complete our online application.

Pengate Handling Systems is a full-service provider of material handling equipment and solutions, helping businesses move, store, and manage products more efficiently. We design, build, and install conveyors, automation systems, and custom storage solutions tailored to each client’s operational needs. Our projects improve workflow, boost productivity, and enhance safety, delivering real, measurable results. With expertise across industries, we combine engineering know-how with hands-on experience to create systems that solve complex challenges and keep businesses running smoothly.

We are seeking a results-driven Optimization Specialist to drive operational excellence across our field operations. This role champions Lean methodologies, streamlines processes, and improves cross-functional performance while delivering measurable business impact.

What You’ll Do

• Lead Lean initiatives using tools such as Kaizen, 5 Why analysis, Process Mapping, 5S, Gemba walks, PDCA, Value Stream Mapping, A3, and Root Cause Analysis.
• Conduct process assessments, identify opportunities for improvement, and implement sustainable solutions.
• Partner with leaders across Service, Dispatch, Parts, Rental, and Logistics to streamline workflows and eliminate bottlenecks.
• Standardize processes, develop staffing and resource forecasts, and optimize utilization.
• Analyze operational data to uncover trends, measure performance, and drive continuous improvement initiatives.
• Lead root cause analyses to resolve operational challenges and prevent recurrence.
• Sponsor and oversee optimization projects with defined metrics, measurable ROI, and clear success criteria.
• Strengthen cross-functional communication and collaboration to improve alignment and workflow integration.
• Implement best practices for workflow efficiency, resource allocation, and process standardization.
• Develop dashboards, KPIs, and reporting frameworks to monitor performance and guide strategic decisions.
• Mentor and influence teams to adopt Lean thinking, operational discipline, and problem-solving mindset.
• Support change management initiatives and promote a culture of continuous learning and improvement.

What We’re Looking For

• Bachelor’s degree in Business, Operations, Logistics, or a related field.
• 3+ years of operational experience, preferably in service-based or field operations.
• Proven success improving fleet utilization and driving cross-department collaboration.
• Experience with dispatch systems, fleet tracking tools, and operational metrics.
• Strong analytical skills with the ability to interpret data, identify trends, and develop actionable insights.
• Excellent problem-solving and decision-making abilities, including root cause analysis.
• Expertise in Lean methodologies, continuous improvement, and process optimization.
• Strong project management skills with the ability to prioritize and manage multiple initiatives simultaneously.
• Exceptional organizational skills and attention to detail.
• Effective communicator capable of presenting ideas clearly to both technical and non-technical audiences.

Why Work at Pengate

• Join a team that values innovation, collaboration, and continuous improvement.
• Work in an environment where your ideas are heard and make an impact.
• Lead meaningful projects and contribute to operational excellence across the organization.
• Grow your skills through opportunities in Lean practices, data-driven decision making, and process optimization.
• Be part of a company that recognizes and celebrates success, both individually and as a team.
• Thrive in a culture that fosters professional development and continuous learning.

Benefits

• Competitive salary and performance-based incentives.
• Comprehensive medical, dental, and vision insurance.
• 401(k) plan with company match.
• Paid time off and company holidays.
• Opportunities for professional development, training, and certifications.
• Supportive and collaborative work environment.

Pengate Handling Systems is dedicated to being an Equal Opportunity Employer. We promote and celebrate a diverse workforce and do not tolerate any discrimination. All human relations decisions will not be based on persons’ race, color, religion, sex, national original, marital status, disability, genetic information, age, veteran status, or citizenship. All potential hires are subject to pre-employment checks which include but are not limited to background checks and drug screenings. In addition, we will provide reasonable accommodations for individuals with disabilities. Should you require an accommodation in completing an application, interview, or pre-employment requirement, please reach out to our Talent Acquisition team at

Mechanical Design Engineer

Kirkwood, PA

Are you a hands-on engineer who thrives on designing, troubleshooting, and improving innovative equipment from the ground up?

At Earth and Turf products, we build and service compact, high-performing compost and manure spreaders for landscaping, market gardening, and small-scale agriculture professionals. We're committed to exceptional quality and customer satisfaction as a faith-based, fast-growing company with small business values and globally competitive products. We're looking for a Mechanical Design Engineer to lead the design and support of our machines and help bring industry-changing ideas to life.

Why You'll Love Working With Us:

• Faith-Based Values: Join a team committed to integrity, service, and treating people with respect—customers and coworkers alike.
• Small Company Feel, Global Reach: Join a fast-growing team with small business values and industry-leading innovation, making a worldwide impact.
• Product You Can Be Proud Of: Work with equipment that's new, different, and engineered to serve professionals in composting, landscaping, and market gardening.
• Customer-First Mindset: Help uphold a standard where every customer experience is 5-star—or we will keep working until it is.
• Collaborative Team Environment: Thrive in a workplace that values communication, mutual support, and hands-on problem-solving.

Who We're Looking For:

• Experienced: 3+ years in a mechanical engineering role; familiar with agricultural or off-road equipment; understanding of electrical wiring, hydraulics, welded structured design, mechanical systems, and able to read and create schematics; welding experience preferred; Associate's degree in engineering technology with equivalent experience or a Bachelor's in degree in Mechanical, Manufacturing, or related engineering field preferred.
• Tech Savvy: 3+ years of experience in SolidWorks or similar software in 2-D and 3-D drawings, and manufacturing documentation tools; experience with sheet metal design is strongly preferred.
• Mechanically Inclined: Experience in assembling and dissembling mechanical components; can troubleshoot equipment failures, familiar with manufacturing equipment, including press brake, shear, milling machine, lathe, handsaw, and welder
• Problem-solver: Brings a hands-on, practical mindset with the ability to troubleshoot and resolve equipment issues.
• Detail-Oriented: Maintains precision in design, documentation, and troubleshooting.
• Collaborative: Works effectively with cross-functional teams, including production, service, and engineering.
• Strong Communicator: Able to clearly explain technical concepts and field issues to internal teams, dealers, and customers.

Key Responsibilities:

• Design & improve mechanical systems for compact agricultural equipment, focusing on sheet metal design with integrated electrical and hydraulic components.
• Create & revise schematics, technical drawings, and product specifications using CAD/SolidWorks software.
• Build & test prototypes on the shop floor, contributing to hands-on development and design validation.
• Collaborate with internal teams to ensure manufacturability, serviceability, and cost-efficiency of designs.
• Support new product development and the continuous improvement of existing equipment.
• Troubleshoot field issues and provide technical support to dealers, service teams, and end-users.
• Create & maintain documentation, including service manuals, installation guides, and support case logs.
• Work a 40-hour work week focusing on efficient, high-quality output.

What We Offer Our Mechanical Engineer:

• $75k-$85k/year, DOE
• Health Insurance Reimbursement
• Paid time off
• Paid holidays
• Quarterly bonuses
• A stable 40-hour work week with a focus on work-life balance
• The chance to work on cutting-edge, compact ag equipment with global reach
• A small team that values integrity, customer satisfaction, and constant innovation
• A faith-based company culture that puts people and purpose before profits

To Apply

We'd love to hear from you if you're a mechanically minded problem-solver ready to design innovative equipment that makes a difference. Please submit your resume for consideration through this job ad. We look forward to learning how you can contribute to Earth and Turf's mission.

By submitting this application, you agree to receive recurring informational text messages (e.g., appointment alerts), which may be automated, to the mobile number used at opt-in from Team Builder Recruiting, LLC. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.