Engineering Jobs Remote Jobs in Pa Remote

We're seeking a knowledgeable and detail-oriented Heat Treat Process Engineering Supervisor to lead and support all aspects of the heat treatment operations with a focus on quality, compliance, and continuous improvement.

POSITION SUMMARY:

The Heat Treat Process Engineering Supervisor serves as a technical expert responsible for ensuring the proper thermal processing of materials to meet metallurgical and production requirements meeting all CQI-9 requirements. This role includes overseeing furnace operations, audits, documentation, process control, equipment maintenance, and continuous improvement initiatives.

The ideal candidate will have strong metallurgical knowledge, heat treat process experience, the ability to troubleshoot equipment and process issues, and the ability to manage compliance in a dynamic manufacturing environment. This role has direct supervisory responsibility for Lab Technicians, including scheduling, performance management, training, and ensuring compliance with laboratory testing standards and metallurgical validation requirements.

ESSENTIAL DUTIES (Complete):

• Oversee and manage daily heat treat operations including carburizing, hardening, tempering, and stress relieving
• Ensure compliance with AIAG CQI-9: Heat Treat System Assessment (HTSA) and other applicable standards
• Implement and maintain heat treat process control plans per AIAG guidelines
• Conduct and lead CQI-9 self-assessments, audits, and ensure closure of gaps and non-conformances
• Ensure proper setup, calibration, and operation of furnaces and quench systems
• Monitor thermal cycles and maintain control charts, pyrometry data, and process records per CQI-9
• Support system accuracy tests (SAT), temperature uniformity surveys (TUS), and instrumentation calibration activities
• Ensure all documentation meets internal and customer-specific AIAG compliance requirements
• Collaborate with Engineering, Maintenance, and Quality to address process improvements and problem-solving
• Perform metallurgical inspections including hardness testing and microstructure verification
• Provide technical guidance to operators and maintenance personnel on best practices
• Develop and optimize heat treat process parameters including atmosphere control, quench severity, and thermal cycle design to meet metallurgical and dimensional requirements
• Atmosphere verification (Carbon Potential, Dew Point, etc.)
• Distortion Mitigation Strategy
• Develop, implement, and maintain training programs to ensure team competency on heat treat systems and compliance
• Lead root cause analysis and corrective action efforts for heat treat-related non-conformities
• Utilize Lean Six Sigma principles to drive cost reduction, efficiency, and quality improvements
• Maintain proper traceability and process documentation for internal and external audits
• Provide technical direction for furnace troubleshooting, repair validation, and upgrade initiatives in coordination with Maintenance
• Perform other duties as assigned or required in support of production and quality goals
• Directly supervise Lab Technicians, including daily work assignments and workload balancing
• Approve timecards, PTO, and manage attendance
• Perform other duties as assigned or required in support of production and quality goals

CORE COMPETENCIES:

• Action oriented: Demonstrates ownership in solving process and compliance issues
• Self-Motivated: Demonstrates ability to take initiative and drive to achieve results. Proactively drives conformance with CQI-9 requirements and continuous improvement
• Accountability: Demonstrates ability to take responsibility and maintains sense of ownership and follow through on commitments. Sets high standards of performance.
• Communication: Demonstrates ability to convey and distribute information effectively and encompass strong speaking, presentation, written and listening skills. Ability to create an environment for open communication, and communicates clearly across departments regarding heat treat and compliance status
• Teamwork: Demonstrates ability to work well with others to accomplish common goals and build a positive climate and trusting relationships within teams.
• Leadership: Demonstrates ability to give direction, motivate, manage and reward performance, provide constructive feedback and foster individual professional development. Trains and guides operators to follow standard operating procedures and compliance guidelines
• Reliability: Demonstrates dependability, accountability and trust. Follows processes and meets commitments. Delivers consistent process performance and regulatory documentation
• Decision-making: Demonstrates ability to discover opportunities in challenges, seek profit and sustainable growth, make courageous while sound decisions and demonstrate a good business understanding. Applies analytical skills and CQI-9 knowledge to make data-driven decisions

KNOWLEDGE, SKILLS & ABILITIES:

• Thorough understanding of heat treatment principles, metallurgy, and thermal processing equipment
• Working knowledge of CQI-9 audits, checklists, gap closures, and AIAG documentation practices
• Familiarity with control system troubleshooting, PLCs, HMIs, and data logging
• Ability to supervise, mentor, and train heat treat personnel on compliance, safety, and process controls
• Skilled in conducting microstructure analysis and hardness testing to validate process results
• Strong organizational and record-keeping skills for always maintaining audit-readiness
• Proficiency in Lean Manufacturing, 5S, and Continuous Improvement
• Physically capable of working in a high-temperature, industrial environment
• Commitment to upholding process integrity and product conformance to specification

WORKING ENVIRONMENTAL CONDITIONS:

• Work involves exposure to high-temperature equipment, hot surfaces, and industrial environments. May encounter fumes, noise, and moving machinery. Personal protective equipment (PPE), including heat-resistant gloves, face protection, and hearing protection, is required. Occasional exposure to quenchants, chemicals, and elevated platforms is expected. Safety training and environmental awareness are critical components of the role.

SUPERVISORY RESPONSIBILITY:

• This role has direct supervisory responsibilities.

The demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.

QUALIFICATIONS:

• Bachelors degree in Mechanical, Materials, Metallurgical, or Manufacturing Engineering required.
• Materials Science or Metallurgical Engineering preferred
• 7+ years of hands-on heat treat or metallurgical experience, preferably in automotive or aerospace manufacturing
• Demonstrated knowledge and application of CQI-9 Heat Treat System Assessment requirements
• Familiarity with AIAG standards and automotive core tools (APQP, PPAP, FMEA, SPC, MSA)
• Experience conducting and documenting SAT, TUS, and other pyrometry-related activities
• Experience operating batch and continuous furnaces, quench systems, and thermal processing equipment
• Demonstrates ability to directly supervise lab personnel including assigning work, evaluating performance, managing corrective actions, and developing team capabilities.
• Creates accountability, enforces standards, and drives measurable performance improvements.
• Proficient in hardness testing, blueprint reading, GD&T, and metallurgical inspection techniques
• Strong computer skills including Microsoft Office and plant data collection systems
• Excellent troubleshooting, documentation, and analytical skills
• Commitment to safety, quality, and environmental standards
• Ability to lead and train team members on technical and compliance-related topics
• Ability to work independently, manage multiple tasks, and prioritize effectively

Compensation details: 96 Yearly Salary

PI34bc9acf25ca-26289-39818891

Location: Remote: Reside close to (Exton, PA)

Portfolio: Allen‑Sherman‑Hoff (ASH) Engineered Material‑Handling Systems (ANDRITZ)

About the Role

Allen‑Sherman‑Hoff (ASH), an ANDRITZ business, delivers engineered material‑handling systems that support power generation, biomass, and pulp & paper facilities operating in demanding, continuous‑run environments. Although ASH is technically an OEM, we operate far more like an A&E/EPC engineering firm: we deliver system‑level engineered solutions, integrating ASH proprietary equipment with structural, mechanical, electrical, and quality requirements to meet strict performance expectations.

We are seeking a Project Manager with power, energy, utilities, or EPC/A&E engineered‑systems project experience, someone who has led large, customer‑facing technical projects through engineering, fabrication, manufacturing, quality, and site support.

If your background is in internal manufacturing operations, IT/telecom deployments, or continuous improvement, this role is not a match. We need a PM who understands industrial plant environments, engineered equipment, and the rigor of technical project delivery.

What You Will Do

Lead Full Lifecycle Execution (Sales Handover → Final Turnover)

• Own the delivery of engineered ASH material‑handling systems across power, biomass, and pulp & paper facilities.
• Drive engineering, drafting, and calculation packages to meet scope, schedule, and contractual requirements.
• Coordinate and unblock fabrication/manufacturing, ensuring manufacturability and compliance.
• Manage supplier RFQs, subcontractor performance, expediting, and logistics.

Quality & Technical Documentation Leadership

• Manage ITPs, weld maps, NDE requirements, pressure tests, dimensional checks, and documentation packages essential to engineered‑equipment delivery.
• Validate compliance to ASME/AWS, customer specifications, and ASH quality standards.

Schedule, Cost, and Risk Management

• Maintain schedule baselines using Primavera P6.
• Oversee cost performance, margin drivers, change control, and contract compliance.
• Identify and mitigate technical and execution risks early.

Customer‑Facing Project Leadership

• Serve as the primary interface between the customer and ANDRITZ technical teams.
• Prepare and deliver technical and commercial progress reports.
• Support site activities (FAT, readiness reviews, installation coordination, commissioning support).

What You Bring

Required

• Experience in A&E/EPC, power generation, utilities, or industrial engineered‑systems delivery.
• (Examples: material handling, conveying systems, rotating equipment, mechanical process systems, boiler/balance‑of‑plant equipment).
• Proven ability to lead engineering‑heavy, customer‑facing projects with strict contractual and QA requirements.
• Hands‑on coordination with engineering, fabrication, manufacturing, quality, suppliers, and field service.
• Experience managing ITPs, weld maps, NDE, pressure tests, QA documentation, and technical turnover packages.
• Proficiency in Primavera P6 and Oracle or similar ERP.
• Bachelor’s degree in Engineering/Construction Management OR 5+ years of relevant engineered‑systems PM experience.

Preferred

• Power plant, utilities, biomass, or pulp & paper industry experience.
• Background in ash handling, bulk material handling, or mechanical systems integration.
• PMP or CAPM certification.
• Experience with retrofit, outage, upgrade, or brownfield scopes.

Work Model

• Remote with periodic travel to Exton, PA, fabrication shops, and customer facilities for inspections, FATs, readiness reviews, and site support.
• Travel expected but varies by project phase.

Why This Role Matters

Your work directly affects the reliability, uptime, and environmental performance of major industrial facilities. When you execute well, a power plant runs cleaner, a pulp mill avoids downtime, and a customer sees ASH as a trusted engineering partner. This is real engineering impact, not back‑office project tracking.

*All qualified applicants will receive consideration without regard to protected characteristics.

Biomedical Equipment Engineering Manager

Philadelphia, PA (Onsite)

Salary: $145,000 + Full Benefits

Full-Time | Leadership Role

We are seeking a Biomedical Equipment Engineering Manager to lead the maintenance, troubleshooting, and operational reliability of medical equipment across a hospital environment in Philadelphia, PA. This is an onsite leadership role responsible for overseeing biomedical engineering operations, ensuring critical medical devices remain safe, compliant, and fully operational to support patient care.

This position will supervise biomedical equipment technicians and engineers while collaborating closely with clinical staff, hospital leadership, and vendors to maintain high standards for equipment performance, safety, and regulatory compliance.

The ideal candidate will bring a strong background in hospital-based biomedical equipment maintenance, medical device troubleshooting, and team leadership within a clinical environment.

Key Responsibilities

• Lead and manage a team of Biomedical Equipment Technicians (BMETs) and Biomedical Engineers responsible for hospital equipment maintenance and support

• Oversee preventive maintenance, repair, and calibration programs for a wide range of medical devices and clinical equipment

• Troubleshoot complex issues involving diagnostic, therapeutic, and patient monitoring equipment

• Ensure all equipment maintenance activities meet hospital regulatory requirements and accreditation standards including Joint Commission and FDA guidelines

• Develop and manage equipment lifecycle planning, including replacement strategy and capital equipment upgrades

• Coordinate with clinical departments to ensure equipment availability and minimize disruption to patient care

• Manage relationships with OEM vendors and third-party service providers for specialized repairs and service contracts

• Implement reliability improvements and maintenance best practices to increase equipment uptime and operational efficiency

• Maintain accurate records and documentation within CMMS / biomedical asset management systems

• Support new medical equipment installations, system integrations, and facility expansion initiatives

• Ensure compliance with hospital safety standards and biomedical engineering best practices

Required Qualifications

• Bachelor’s degree in Biomedical Engineering, Electrical Engineering, or related field

• 5+ years of biomedical equipment experience within a hospital or healthcare system

• 2+ years of leadership or supervisory experience managing biomedical technicians or engineers

• Strong expertise in medical device troubleshooting, maintenance, and preventive service programs

• Experience supporting equipment such as patient monitors, imaging systems, infusion pumps, anesthesia machines, ventilators, and diagnostic equipment

• Knowledge of Joint Commission standards, FDA regulations, and healthcare compliance requirements

• Experience using CMMS or biomedical equipment management systems

Preferred Experience

• Experience managing biomedical operations across multiple departments or hospital campuses

• Familiarity with network-connected medical devices and clinical technology systems

• Certification such as CBET (Certified Biomedical Equipment Technician) or related biomedical certification

Compensation & Benefits

• $135,000 base salary

• Comprehensive health, dental, and vision benefits

• 401(k) with company match

• Paid time off and holidays

• Opportunity to lead biomedical engineering operations in a mission-driven healthcare environment

The Efficiency Network, Inc. (TEN) is an independent energy-focused design/build contractor that provides building infrastructure upgrades and energy projects services to state, local, and federal government, K-12 education, higher education, healthcare, and large commercial and industrial customers. We help our clients address deferred maintenance, invest in infrastructure, improve the efficiency and sustainability of their buildings, and make their operations more resilient.

TEN applies state of the art technology, engineering, construction and project management concepts and practices, along with creative financing and ownership solutions, to deliver projects quickly and efficiently.

TEN is part of the Duquesne Light Holdings, Inc. family of companies.

Location : Pittsburgh HQ Hybrd 3 -days a week,

Summary:

Reporting to TEN’s Vice President, Engineering, the Director-Design Engineering is responsible for overseeing the development and supporting the delivery of multi-disciplined construction projects. This role ensures that all design outputs meet technical, regulatory, and quality standards while aligning with project objectives and client requirements. The Director – Design Engineering will collaborate closely with internal development, engineering, and construction teams while directing and managing external design professionals (architects and engineers) to translate conceptual designs into executable plan documents and constructable project strategies. The Director – Design Engineering plays a key role in ensuring that projects are designed in a safe and profitable manner and all associated project risks are identified and mitigated.

Location: The successful candidate is situated in the Pittsburgh, PA region and will work from the company’s office and a home-based office with travel to customer sites as necessary.

Responsibilities:

Design Phase Leadership & Commercial Strategy

• Lead and manage internal and external multidisciplinary design teams (architects, engineers, and consultants) through all phases of design within a Design/Build delivery model, from concept development through design completion.
• Define and control design scope, standards, schedules, and deliverables to ensure alignment with project objectives, contractual obligations, and client expectations.
• Lead and participate in commercial negotiations with owners, design consultants, and key trade partners related to design scope, fees, risk allocation, and change management.
• Facilitate design coordination and decision-making with clients, internal stakeholders, and external partners to resolve technical and commercial issues efficiently.
• Oversee development of coordinated, complete, and constructible design solutions that enable accurate pricing, competitive proposals, and predictable construction outcomes.
• Ensure designs comply with applicable codes, regulatory requirements, and owner standards while balancing cost, schedule, quality, and risk considerations.
• Direct preparation and review of design submittals, equipment selections, and technical packages, ensuring commercial alignment and securing required client approvals.
• Validate evolving cost estimates, contingencies, and allowances throughout design development, identifying risks, opportunities, and value engineering options to protect and enhance project margins.
• Proactively identify, assess, and mitigate design-related commercial risks, including constructability, scope gaps, escalation exposure, and design schedule impacts.
• Confirm designs are fully coordinated and commercially executable prior to construction handoff, minimizing downstream changes, claims, and margin erosion.

Construction Phase Design Oversight & Commercial Support

• Serve as the primary design authority during construction, providing technical leadership and commercial support to project managers, superintendents, and field teams.
• Support interpretation of drawings, specifications, and design intent while assessing cost, schedule, and contractual implications of design decisions.
• Review and respond to requests for information (RFIs), submittals, and design clarifications with a focus on minimizing commercial exposure and avoiding schedule disruption.
• Evaluate proposed field changes, substitutions, and value engineering initiatives for technical feasibility, constructability, cost impact, risk allocation, and contract compliance.
• Lead coordination with architects, engineers, design-assist partners, and subcontractors to negotiate and resolve design-related issues encountered during construction.
• Ensure all approved design changes are accurately incorporated into revised documents and as-built records, maintaining alignment with contract requirements.
• Monitor construction activities for adherence to approved design documents.
• Support commissioning, testing, and closeout activities to ensure systems perform as designed and contractual obligations are met.
• Maintain alignment between design intent, construction execution, and financial performance, actively supporting margin protection, change management, and dispute avoidance.

Education and Experience Required:

Required:

• Bachelor’s degree in Engineering, Architecture, or a related field.
• 10+ years of experience in detailed design, estimating, and commercial support within the building construction industry.
• Proven leadership managing multidisciplinary design teams in Design/Build environments.
• Demonstrated success in commercial negotiations with owners, consultants, and trade partners.
• Advanced proficiency in CAD/BIM platforms and design standards.
• Strong working knowledge of building codes, regulatory requirements, and industry best practices.
• Excellent communication, negotiation, problem-solving, and organizational skills with the ability to balance technical and commercial priorities.

Preferred:

• Leadership on large-scale, complex, multi-disciplinary Design/Build projects.
• Direct involvement in contract negotiations, design fee agreements, and change management.
• Strong track record of providing commercial and risk-management support to project delivery teams throughout the project lifecycle.

EQUAL OPPORTUNITY EMPLOYER

Duquesne Light Holdings is committed to providing equal employment opportunity to all people in all aspects of the employment relationship, without discrimination because of race, age, sex, color, religion, national origin, disability, sexual orientation and gender identity or status as a Vietnam era or special disabled veteran or any other unlawful basis, as defined by applicable law, and fostering a workplace free of unlawful discrimination and retaliation. This policy affects decisions including, but not limited to, hiring, compensation, benefits, terms and conditions of employment, opportunities for promotion, transfer, layoffs, return from a layoff, training and development, and other privileges of employment. An integral part of Duquesne Light Holdings' commitment is to comply with all applicable federal, state and local laws concerning equal employment and affirmative action.

Duquesne Light Holdings is committed to offering an inclusive and accessible experience for all job seekers, including individuals with disabilities. Our goal is to foster an inclusive and accessible workplace where everyone has the opportunity to be successful.

If you need a reasonable accommodation to search for a job opening, apply for a position, or participate in the interview process, connect with us at and describe the specific accommodation requested for a disability-related limitation.

Ainsley Search Group is hiring a Plant Engineering Manager with solid experience in plant engineering and maintenance management for a High Growth Manufacturer located in Chester County. This Plant Engineering Manager will report to VP of Operations, lead and develop a maintenance and engineering team and plan, optimize PM, optimize plant reliability and equipment performance output, further promote plant safety, and reliability, oversee the life cycle of major plant engineering projects. This is a full-time, permanent opportunity with lucrative compensation, bonus, benefit and growth.

Responsibilities:

• Lead, manage, mentor, and develop a plant engineering team, plan staffing outlook for maintenance and engineering team based on operational demand and make decision on hiring, training, etc.
• Report to VP of Operations and collaborate with cross functional teams to develop and implement a facility maintenance system, drive PM, reliability, process improvement on safety.
• Lead life cycle of major plant expansion, capital projects, oversee plant engineering projects design, execution, commissioning, close-out, manage contractor, equipment manufacturer, suppliers’ quality, performance and support contractor and supplier selection and qualification process.
• Develop, implement, and standardize maintenance practice, procedure and process across organization, plan and optimize resource for predictive and preventive maintenance, lead and manage plant maintenance programs, oversee equipment inspections, support safety and reliability training to optimize overall plant safety, reliability, and efficiency.
• Manage budget, cost and budget planning for all plant engineering projects, maintenance programs, identify area of cost saving opportunities and drive cost saving initiatives.
• Lead the security, sanitation, janitorial, utility, and property management programs across plant, create and maintain master site plan and collaborate with safety and EHS to ensure compliance with OSHA, GMP and EHS regulations.
• Collect, analyze maintenance data, KPI and operational data to track, monitor up-time, down-time performance on plant systems such as chiller, HVAC, condensate systems, plant steamer, etc, identify root causes and opportunities of improvement, further achieve higher efficiency, accuracy, cost saving on equipment performance output.
• Collaborate with EHS, Reliability Engineer, Project Engineer to support new capex investment, installation, commissioning, upgrade, routine maintenance, repair, and upgrade.
• Collaborate with Process, Quality, Reliability engineering and senior management, based on operational data, analysis to support CI, sustain and promote process safety, equipment reliability, and optimize operational output.
• Collaborate with executive management team on strategic planning regarding plant expansion, major capex investment, maintenance program, etc.
• Lead the new plant site design, development projects from start to finish, develop and modify new plant layout and expanded layout for existing plant facility.

Qualifications:

• Bachelor’s Degree in technical degree is a plus, higher education desired.
• Recent years of tenure as a hands-on senior leader as Plant Engineering Manager, or related roles within manufacturing industry, expose to high yield, fast speed automated manufacturing environment required.
• Hands-on leadership skill, ability to establish rapport and hold subordinates accountable, ability to restructure and develop a team.
• Strong analytical and problem-solving skill, strong knowledge in Project Management skill.
• Strong mindset in process improvement, process safety and reliability, ability to make difficult decision independently.
• Proficient in Microsoft Suite, CMMS and ERP based systems.
• Aspiration to advance to senior management level

Compensation and Benefit:

• Lucrative compensation
• Yearend bonus
• 401k with match
• PTO
• Paid Holidays
• Health, dental and vision
• Life Insurance
• Disability Insurance
• Tuition Reimbursement
• Relocation Assistance

*At Securian Financial the internal position title is Infrastructure Dir."

Mission

"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."

Positioning

The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.

This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.

• Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.

• Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.

• Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.

Scope of Accountability

Resilience Engineering & Cloud Reliability

• Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.

• Own resilience automation, chaos testing, and IaC-based recovery validation.

• Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.

Quality Engineering & Continuous Testing

• Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.

• Drive automation-first testing (functional, non-functional, performance, resilience).

• Embed observability-driven quality validation and contract testing across services.

Performance, Capacity & Efficiency Engineering

• Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).

• Partner with Platform & Infrastructure teams to tune performance across application and platform layers.

• Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.

Cross-Domain Architecture Collaboration

• Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.

• Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.

• Engage Data Architects for data resilience, replication, and pipeline reliability.

• Work with Business Architects to align technical reliability goals with critical business outcomes.

Leadership & Talent Development

• Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.

• Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.

• Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.

Core Technical Competencies

• AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.

• Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.

• Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.

• Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.

• Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.

• Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.

• Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.

• FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.

Leadership Competencies

• Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.

• Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.

• Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.

• Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.

• Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.

Qualifications & Experience

• 12+ years in cloud engineering, reliability, or platform leadership roles.

• 5+ years leading Sr. Managers/Managers in technical domains.

• Proven expertise across AWS, with working knowledge of Azure and GCP.

• Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.

• Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.

• Certifications:

  • Required: AWS Certified Solutions Architect - Professional

  • Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect

Success Metrics

• 99.9% availability maintained for Tier-1 workloads.

• 100% coverage of DR automation for Tier-1 services.

• 25% annual increase in automated quality/test coverage.

• 15% annual improvement in resource efficiency and cost performance.

• Documented resilience participation across all enterprise architecture blueprints.

• Positive "technical peer readiness" and succession rating from Head of REO.

Summary Value Proposition

This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.

It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here

*At Securian Financial the internal position title isEngineering Senior Analyst or Engineering Consultant. The title and salary will be determined based on experience and applied skills.*

Position Summary:

Are you a hands-on engineer who enjoys designing, building, and supporting modern communication platforms? Do you like solving complex problems and working with teams that move quickly from idea to delivery? This role offers the opportunity to make an immediate impact.

As a member of the Telephony and Contact Center Technologies team, you will design, engineer, implement, and support Securian's enterprise telephony and contact center platforms. This role is focused on delivering secure, scalable, cloud-first communication solutions using RingCentral, NiCE CXone, and Cyara.

You will work closely with Contact Center Operations, Agile delivery teams, and technology partners to continuously improve customer and associate experiences across the enterprise.

Responsibilities include but not limited to:

• Design, engineer, implement, and support enterprise UCaaS and CCaaS platforms

• Provide daily operational support for cloud-based telephony, unified communications, SIP services, and IVR solutions

Qualifications:

• Hands-on experience engineering and supporting cloud-based telephony or contact center platforms

• Strong understanding of VoIP technologies, SIP, and call routing concepts

• RingCentral and RingCentral Contact Center engineering

• NiCE inContact / CXone administration and development

• Cyara or similar modern telephony orchestration platforms

• Experience designing and supporting UCaaS and CCaaS (including IVRs and contact center workflows) solutions in large enterprise environments

• Solid knowledge of networking concepts related to real-time communications

Preferred Qualifications:

• Supporting remote contact center agents

• REST API integrations and automation

• Scripting using PowerShell or Python

• Workforce management, call recording, or speech technologies

• PSTN carrier and phone number lifecycle management

This role plays a critical part in modernizing Securian's communication platforms and ensuring reliable, scalable experiences for customers and associates. You will have the opportunity to influence technical direction and deliver compelling solutions that matter.

#LI-Hybrid**This position willhave a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. Ifyou'reina commutable distance (90 minutes)you'lljoin us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here

*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*

Position Summary:

Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.

Responsibilities include but not limited to:

• Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.

• Perform analysis, design, development, and integration on medium to high level complexity assignments.

• Develop and support automation capabilities through webservices and APIs.

• Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.

• Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.

• Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.

• Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.

• Document technical processes and contribute to knowledge sharing across the EPS team.

Qualifications:

• Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.

• 3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.

• Familiarity with SAP ICM/APM and ALM modules.

• Strong problem-solving skills and ability to manage multiple priorities.

• Excellent communication skills and ability to work cross-functionally.

• Experience with Agile methodologies and DevOps practices is a plus.

Preferred Qualifications:

• SAP Certification in relevant Modules

• Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices

• Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.

• Ability to work independently and as part of a collaborative team.

• Commitment to continuous learning and process improvement.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here