Difference Between Ic Engine And Ec Engine Jobs in Usa
8,252 positions found — Page 14
Within assigned service area, provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service, to general and specialized diagnostic, therapeutic, and support medical equipment, such as anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory, etc., as assigned by Clinical Engineering (CE) Manager.
Position is eligible for travel to other nationwide Trinity Health sites as needed that are outside of normal location coverage. While on site at these locations the position will receive a significantly higher hourly rate. Travel will be voluntary.ESSENTIAL FUNCTIONS
Knows, understands, incorporates, and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Performs PM procedures on multiple types of general and specialized clinical equipment.
Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.
Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.
Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.
Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.
Determines need for replacement parts and supplies, selects the most cost-effective source, and submits properly completed parts request using established policies and guidelines.
Completes corrective and planned maintenance work order documentation per policy.
Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.
Continually improves processes by seeking ways to eliminate and reduce waste.
Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.
May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.
Performs other duties as assigned or requested by the CE Manager.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONSAssociates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.
Three (3) to five (5) or more years' experience performing corrective and planned maintenance on medical devices and/or clinical equipment.
Must have a basic understanding of anatomy, physiology, and medical terminology.
Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of test equipment.
Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.
Must be able to adapt to frequently changing work priorities.
Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.
Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONSMust be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to adapt to frequently changing work priorities.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
L3Harris is a proven leader in tactical communications, geospatial systems and services, air traffic management, environmental solutions, avionics and electronic warfare, and space and intelligence.
We dont work here just for the advanced technology and equipment: we work here because we know what
- and who
- were protecting! From families to the intelligence community, and from our climate to our men and women in uniform
- were making the world a safer place! L3Harris Space Superiority group has an opening for a Lead, Systems Engineer to join our team of qualified, diverse individuals.
The L3Harris AgileEO Systems Engineering department is seeking a systems engineer to join our team and support one of our newer programs.
The successful candidate will support the program technical leads (Lead or Chief Systems Engineer, IPT Lead) by performing technical analysis, managing specifications, and generating design review and technical documents.
Additional responsibilities include supporting the test and design verification, requirements sell off, end item data package (EIDP) generation efforts.
Develop and integrate advanced electro-optical systems for space-based applications, ensuring compliance with all relevant specifications and mission requirements.
Technical Leadership: Provide technical leadership and guidance in the areas of systems engineering, including architecture development, requirements analysis, and verification and validation (V&V).
Requirements Management: Define, manage, and maintain system and sub-system level requirements, ensuring traceability and compliance throughout the project lifecycle.
Modeling and Simulation: Conduct modeling and simulation activities to predict system performance and behavior under various operational scenarios.
Project Execution: Lead and coordinate multidisciplinary engineering teams throughout the project lifecycle, from conceptual design to final system delivery and operation.
Customer Requirements: Translate the voice of the customer into system level requirements and evaluate alternative solutions to establish preliminary system designs.
Stakeholder Communication: Communicate effectively with internal and external stakeholders, including subcontractors and U.Government customers, to ensure alignment and project success.
Standards Compliance: Ensure all engineering activities adhere to industry standards, regulatory requirements, and best practices.
Collaboration: Work effectively in a team environment and collaborate with multidisciplinary teams to achieve project goals.
Training and Mentoring: Provide training and mentorship to junior engineers, fostering their development and growth within the team.
Qualifications: Bachelors degree in Engineering, Physics, or other related scientific discipline and 9 years of relevant space-based EO/IR systems engineering work experience.
A graduate Degree and a minimum of 7 years of prior related experience.
Experience as a Control Account Manager (CAM) and Integrated Product Team Lead (IPTL) is required 6 years experience in electro-optics, including experience with optical design, sensors, detectors, and imaging systems 6 years experience working with engineering and simulation software tools, such as MATLAB Candidate must be eligible to obtain a DOD Secret security clearance Preferred Additional Skills: Holds an active Secret or Top Secret/SCI clearance Demonstrated experience with space systems engineering, including knowledge of space environments, satellite systems, and space mission design Experience in leading technical teams, managing projects, and coordinating cross-functional engineering activities Relevant professional certifications, such as INCOSE Systems Engineering Professional (SEP) certification, are a plus Proficient in Model Based Systems Engineering (MBSE) tools such as DOORs, CAMEO, CREO, JIRA and SysML Excellent verbal and written communication skills, with the ability to clearly convey complex technical information to diverse audiences Strong analytical and problem-solving abilities, with a proven track record of tackling complex engineering challenges Ability to work effectively in a team environment and collaborate with multidisciplinary teams to achieve project goals In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
Please click here for the E-Verify Poster in English or Spanish .
For information regarding your Right To Work, please click here for English or Spanish .
Did you love building as a kid? Do you enjoy taking something apart, just to figure out how to put it back together? Our engineers drive liquid processing innovation, creating new ways to improve – and increase – performance. We’re passionate about designing custom equipment that exceeds our customers’ expectations. Our engineers partner closely not only with our customers, but also with peers across sales, manufacturing, and assembly.
We offer rewarding, challenging opportunities throughout the world, across multiple market segments. If you’re excited by how machines work and want to make them better, we want to talk to you.
Do we have your attention?
TechniBlend is looking for a Process Engineering Manager to lead and oversee the process engineering discipline for custom food and beverage processing equipment integrated with automation and control systems. This role ensures process designs meet customer specifications, food safety and regulatory requirements, and performance expectations while driving standardization, innovation, and continuous improvement.
The Process Engineering Manager is a technical leader who collaborates closely with Mechanical, Electrical, Automation, Project Management, Manufacturing, and Sales teams to deliver successful engineered‑to‑order projects.
Are you passionate about this work?
Leadership & Team Management
- Lead, mentor, and develop the process engineering team, fostering technical excellence and professional growth.
- Set priorities, allocate resources, and establish clear expectations to ensure projects meet scope, schedule, and budget commitments.
- Promote a culture of safety, collaboration, accountability, and continuous improvement.
- Support workload planning and resource forecasting to align with project demand.
Process Engineering Oversight & Execution
- Own and approve process engineering deliverables, including process flow diagrams, equipment sizing, utility requirements, and sanitation concepts.
- Validate process designs for performance, cleanability, safety, and manufacturability within engineered‑to‑order systems.
- Ensure process intent is fully integrated with mechanical layouts, automation architectures, and control strategies.
- Oversee the full project lifecycle from concept development through commissioning and customer acceptance.
- Partner with Project Managers and Engineering Leads to review progress, resolve issues, and maintain alignment with project goals.
- Identify, assess, and mitigate technical and process‑related risks that could impact quality, schedule, or cost.
Process Optimization & Innovation
- Drive continuous improvement initiatives focused on labor efficiency, cost reduction, and design standardization.
- Improve process robustness and repeatability while balancing customization requirements.
- Lead root cause analysis and corrective actions for process deviations or performance issues.
- Champion risk assessments, process capability studies, and post‑project reviews to capture lessons learned and improve future designs.
Compliance & Documentation
- Ensure all process designs meet company, customer, and industry best practices.
- Maintain accurate and complete documentation, including SOPs, sanitation procedures, technical manuals, and training materials.
- Ensure compliance with FDA, USDA, and applicable food safety and sanitary design standards.
- Support adherence to relevant mechanical, electrical, and safety standards (e.g., ASME, UL, NFPA) as they relate to process systems.
Cross-Functional Collaboration
- Partner closely with Mechanical, Electrical, Automation, Manufacturing, Quality, Service, and Operations teams.
- Provide process engineering leadership during customer reviews, FATs, SATs, and commissioning activities.
- Support Sales and Applications teams during quoting and concept development with process expertise.
- Collaborate with Procurement and Operations to ensure successful project execution and delivery timelines.
What’s in it for you?
There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career.
In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. Total compensation includes your salary, comprehensive medical/dental programs, as well as life insurance, a generous paid time off program, and a retirement savings plan with a company match. And because we understand the importance of feeling protected, there is no waiting period for benefits – you are eligible on your first day of employment!
If this sounds like you, we want to connect!
Education: BS in Mechanical, Chemical, Electrical, or Industrial Engineering (or related field)
Experience:
- 10+ years in engineering roles within food & beverage or related industries.
- 5+ years in a leadership or management position.
Technical Skills:
- Strong knowledge of process engineering, fluid mechanics, and sanitary design principles
- Experience sizing and specifying food and beverage process equipment
- Understanding of PLC‑based automation and control systems
- Proficiency with CAD software and project management tools
- Knowledge of food safety, regulatory, and sanitary standards
Soft Skills:
- Excellent Leadership abilities including ability to lead cross functional engineering teams.
- Excellent verbal, written, and presentation skills
- Strong problem‑solving abilities in fast‑paced, project‑driven environments
Other:
- Ability to travel up to 15% (Primarily North America with some International)
Pro Mach, Inc. was named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities.
We have the rewards, opportunities, and the market strength of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally with the personal touch and feel of a smaller company where you can make an impact every day.
Curious about life at ProMach? Follow us on LinkedIn, Twitter, and Instagram!
ProMach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace.
We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.
#TEC
#INTEC
We’re hiring an Engineering Team Manager in Plymouth for a confidential precision manufacturing organization. This is an engineering leadership role overseeing a team of technical professionals responsible for design-for-manufacturability (DFM), technical quoting, and customer application support within a highly regulated, build-to-print manufacturing environment. The ideal candidate is an experienced engineering manager with a background in precision manufacturing who can develop technical teams while ensuring strong cross-functional collaboration between engineering, manufacturing,supply chain,and commercial teams.
Key Responsibilities:
- Lead and support the team of seven technical professionals in achieving sales and profitability goals
- Be the key point of contact between customers, sales, engineering, and manufacturing for escalated customer calls and potential customer visits
- Collaborate with customers and internal engineering teams to optimize product design for manufacturability and performance within the company’s capabilities.
- Oversee the development and refinement of technical quoting models and supply chain strategies to improve accuracy and responsiveness.
- Ensure that high-value opportunities are properly scoped, resourced, and communicated across departments.
- Support the engineering) and commercial teams, with occasional participation in customer calls, site visits, and technical escalations
- Provide detailed technical and program-level updates to senior leadership as needed.
Required Qualifications:
- Bachelor of Science in Engineering (Mechanical, Manufacturing, or related field)
- 5+ years of relevant technical experience in engineering or adjacent
- 2+ years of management experience in engineering or adjacent
Preferred Qualifications:
- Experience in precision manufacturing or high-volume production environments.
- Background in cross-functional collaboration between sales, engineering, and manufacturing.
Additional Information:
- Full-time, salaried position. Base starts at $109,000, with final compensation based on experience, skills, and internal equity.
- Occasional travel may be required.
Why You’ll Love This Role:
This is a unique opportunity to lead and strengthen an Applications Engineering team within a precision manufacturing environment supporting complex, high-reliability components for regulated industries. If you are an engineering leader with experience in DFM, technical program support, and cross-functional manufacturing collaboration, and you’re ready to make a measurable impact in Plymouth, MA, we encourage you to apply for the Engineering Team Manager role today.
Ainsley Search Group is hiring a Plant Engineering Manager with solid experience in plant engineering and maintenance management for a High Growth Manufacturer located in Chester County. This Plant Engineering Manager will report to VP of Operations, lead and develop a maintenance and engineering team and plan, optimize PM, optimize plant reliability and equipment performance output, further promote plant safety, and reliability, oversee the life cycle of major plant engineering projects. This is a full-time, permanent opportunity with lucrative compensation, bonus, benefit and growth.
Responsibilities:
- Lead, manage, mentor, and develop a plant engineering team, plan staffing outlook for maintenance and engineering team based on operational demand and make decision on hiring, training, etc.
- Report to VP of Operations and collaborate with cross functional teams to develop and implement a facility maintenance system, drive PM, reliability, process improvement on safety.
- Lead life cycle of major plant expansion, capital projects, oversee plant engineering projects design, execution, commissioning, close-out, manage contractor, equipment manufacturer, suppliers’ quality, performance and support contractor and supplier selection and qualification process.
- Develop, implement, and standardize maintenance practice, procedure and process across organization, plan and optimize resource for predictive and preventive maintenance, lead and manage plant maintenance programs, oversee equipment inspections, support safety and reliability training to optimize overall plant safety, reliability, and efficiency.
- Manage budget, cost and budget planning for all plant engineering projects, maintenance programs, identify area of cost saving opportunities and drive cost saving initiatives.
- Lead the security, sanitation, janitorial, utility, and property management programs across plant, create and maintain master site plan and collaborate with safety and EHS to ensure compliance with OSHA, GMP and EHS regulations.
- Collect, analyze maintenance data, KPI and operational data to track, monitor up-time, down-time performance on plant systems such as chiller, HVAC, condensate systems, plant steamer, etc, identify root causes and opportunities of improvement, further achieve higher efficiency, accuracy, cost saving on equipment performance output.
- Collaborate with EHS, Reliability Engineer, Project Engineer to support new capex investment, installation, commissioning, upgrade, routine maintenance, repair, and upgrade.
- Collaborate with Process, Quality, Reliability engineering and senior management, based on operational data, analysis to support CI, sustain and promote process safety, equipment reliability, and optimize operational output.
- Collaborate with executive management team on strategic planning regarding plant expansion, major capex investment, maintenance program, etc.
- Lead the new plant site design, development projects from start to finish, develop and modify new plant layout and expanded layout for existing plant facility.
Qualifications:
- Bachelor’s Degree in technical degree is a plus, higher education desired.
- Recent years of tenure as a hands-on senior leader as Plant Engineering Manager, or related roles within manufacturing industry, expose to high yield, fast speed automated manufacturing environment required.
- Hands-on leadership skill, ability to establish rapport and hold subordinates accountable, ability to restructure and develop a team.
- Strong analytical and problem-solving skill, strong knowledge in Project Management skill.
- Strong mindset in process improvement, process safety and reliability, ability to make difficult decision independently.
- Proficient in Microsoft Suite, CMMS and ERP based systems.
- Aspiration to advance to senior management level
Compensation and Benefit:
- Lucrative compensation
- Yearend bonus
- 401k with match
- PTO
- Paid Holidays
- Health, dental and vision
- Life Insurance
- Disability Insurance
- Tuition Reimbursement
- Relocation Assistance
Vice President – Engineering & Manufacturing
| Executive Leadership | High-Impact Role
I’m currently partnering with a well-established aerospace manufacturing organization that is looking to bring on a Vice President of Engineering & Manufacturing to lead both product development and production operations.
This is a key executive leadership role responsible for driving the design, manufacturing, and delivery of highly engineered aerospace systems used on global aircraft platforms. The role oversees engineering, production, materials planning, and supply chain while working closely with program management, operations, and executive leadership.
If you enjoy building high-performing teams, improving manufacturing performance, and delivering complex aerospace programs, this could be a great opportunity.
What You’ll Be Responsible For
• Leading aerospace programs from design through production and delivery
• Overseeing engineering, manufacturing, supply chain, and materials planning
• Driving operational efficiency, cost control, and production scalability
• Partnering with program management and commercial teams to support program execution and accurate cost estimates
• Implementing continuous improvement initiatives across engineering and manufacturing operations
• Ensuring compliance with aerospace quality standards and regulatory requirements
• Developing and mentoring leadership across engineering and production teams
What They’re Looking For
• 15+ years of experience in aerospace or complex manufacturing environments
• 10+ years leading engineering or production teams
• Strong experience supporting aerospace hardware programs from development through production
• Background in AS9100 or other regulated manufacturing environments
• Experience driving Lean manufacturing / operational improvement initiatives
• Bachelor’s degree in engineering, manufacturing, or related field
• Ability to obtain U.S. security clearance is preferred
Why This Role Stands Out
• Executive leadership position with major influence on company strategy and operations
• Opportunity to lead both engineering innovation and manufacturing execution
• Highly visible role working directly with executive leadership and customers
• Strong growth potential as the company continues to expand
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Missile & Weapon Systems division is seeking a Software Engineering Manager to oversee the Small Diameter Bomb (SDB) software team in St. Charles, MO (St. Louis Metro Area). This Software Manager will lead multiple software teams in the SDB organization, which produces precision-guided weapon systems used by U.S. and allied forces worldwide.
The SDB Software Manager will lead, mentor, and develop a team of software engineers, manage performance in line with Boeing values and behaviors, and foster a culture of innovation, collaboration, and compliance with industry standards and best practices. The role will implement strategic business plans and policies to align teamwork with organizational goals, drive process improvements to boost efficiency and productivity, and manage resource allocation to support software engineering initiatives.
This proactive manager will collaborate with external suppliers, partners, and cross-functional teams to deliver technical solutions that meet customer needs and regulatory requirements, maintain clear communication and strong relationships with customers and stakeholders to ensure alignment on project objectives, and stay current on emerging technologies and industry trends to guide adoption of relevant innovations. The position will also facilitate regular technical reviews and audits, provide oversight and approval of technical approaches, products, and processes, and ensure that the team’s deliverables consistently meet established standards and practices.
Join Us. Protect Our Nation and Partners.
The Precision Strike organization is a strong and growing business that produces world-class software built exceptional software teams developing Operational Flight Software (OFS), mission planning and weapon control software, resident test software, and other real-time embedded and mission-processing software for SDB and related munition systems. Teams develop in languages such as C++, C, Python, and may integrate with C#, Java, and Qt front ends, delivering to target platforms including Linux, VxWorks, and bare-metal embedded targets.
Boeing offers a comprehensive benefits package including substantial Paid Time Off (PTO), flexible work environment, paid parental leave, an Industry Leading 401k matching plan, extremely generous tuition assistance for earning advanced degrees, and paid medical leave programs. For more information, click here.
Position Responsibilities:
Manage software engineering team through the software development life cycle.
Develops and maintains relationships and partnerships with peers, business partners, customers, and other stakeholders.
Oversee software architecture, design, and implementation practices to ensure compliance with Software Engineering Design Practices, safety-critical requirements, and Independent Verification & Validation (IV&V) inputs.
Participate in program operating rhythm to include Program Increment (PI) Planning, program risk/issue/opportunity (RIO) process, and EVMS activities.
Takes a collaborative approach to develop and execute project and process plans, implement policies and procedures, and develop and maintain roadmaps.
Acquires resources for projects and processes and provides oversight and approval of technical approaches in alignment with organizational strategy.
Demonstrate a commitment to the mission and motivation to combine the team’s energy and expertise to achieve a common objective.
Lead technical planning and execution for software scope, schedule, and cost, including Earned Value Management (EVM) duties and reporting.
Basic Qualifications (Required Skills/ Experience):
3+ years of experience managing or leading teams in a software engineering discipline
3+ years of experience with project management principles
Experience in Agile Software Development
Demonstrated ability to provide a high level of customer satisfaction
Preferred Qualifications (Desired Skills/Experience):
Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science or equivalent experience
Strong communication skills – written/verbal
Experience in developing large-scale software systems
Experience developing software for real-time embedded systems
More than 3 years of experience managing projects using Earned Value Management System (EVMS)
Experience in C++ or Ada
Experience working directly with DOD customers or participating in Program Increment (PI) planning and milestone reviews
Experience with software requirement development
Experience working with system/subsystem engineers
Experience working with external software suppliers
Drug Free Workplace:
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Travel:
Less than 10%, if any
Relocation:
This position offers relocation based on candidate eligibility. Note: Basic relocation will be offered for eligible internal candidates.
Conflict of Interest:
Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range for Manager Level (Level K): $160,650 - $217,350
Potential signing bonus for eligible/qualified external candidates.
Applications for this position will be accepted until Mar. 27, 2026
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing’s Global Real Estate and Facilities (GREF) organization has a rare opportunity available for an experienced Facilities Engineering Manager to join the East Region as a key member of this dynamic Leadership team, on-site in North Charleston, SC.
How you’ll make an impact:
You will support a talented team of engineers within the Projects, Assets, Construction, and Engineering (PACE) Center of Expertise (CoE), helping deliver solutions that sustain manufacturing operations and other mission-critical systems. In this role, you will contribute to enabling our business partners’ success by supporting reliable, high-performing infrastructure across our facilities.
The team you will serve operates across the Southeast Region, with sites in North Charleston, SC; Ladson, SC; and Orangeburg, SC. This position includes an expectation of approximately 25% domestic travel.
Position Responsibilities:
Lead and manage the engineering team’s goals and priorities, providing direction and oversight
Design and implement process plans, policies, and procedures to achieve operational goals
Secure and allocate resources for engineering work, oversee supplier technical performance, and drive process improvements
Build and maintain strong partnerships with customers, stakeholders, peers, business partners, and direct reports
Review and approve technical approaches, designs, products, and engineering processes
Participate in equipment make/ buy evaluations and source selection, providing technical oversight of suppliers
Coach, mentor, and motivate employees to develop skills, advance careers, and sustain high performance
Basic Qualifications (Required Skills/Experience):
Bachelor's degree or higher in an ABET accredited engineering field or equivalent
3+ years of experience leading projects and/or teams (i.e. Greenfield, Brownfield Projects)
Experience with Computerized Maintenance Software Systems (CMMS) (i.e. Maximo or equivalent)
Experience with oversight of budgets and financial data
Experience in financial acumen
Able to travel up to 25% domestically
Preferred Qualifications (Desired Skills/Experience):
10+ years of experience in Facilities Engineering
Experience leading process evaluations and improvements
Experience developing strategic long range business plans
Experience developing and delivering presentations to senior leaders
Experience using MS Office Suite
Experience in administrating change management
Strategic decision making, planning and organizational skills
If you have deep, hands-on experience as a Facilities Engineering Manager, we’d like to hear from you.
Conflict of Interest:
Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.
Drug Free Workplace:
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range: $126,650 - $171,350
Applications for this position will be accepted until Apr. 01, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Lead technology delivery for the Finance and Risk function and maintain a strategic roadmap, align product, engineering, and business teams around releases.
Work with cross-functional leaders on strategy and vision through building, shipping, and maintaining our digital products.
This area is beginning a significant multi-year transformation, and the leader will be responsible for driving and executing technology and data transformation within this function.
This role leads teams responsible for technology capabilities in Controller, Finance and Planning Analytics, Sourcing and Procurement, Enterprise Risk Management, Audit, and Antifraud areas.
This is a cross-functional role where the engineering and product teams directly report into them.
This role will work closely with business stakeholders and enterprise technology partners to understand critical data and analytical challenges and opportunities.
Establish Finance and Risk Data platform by applying in-depth knowledge of data domains, cloud data and application technologies, architectural patterns, frameworks, and tooling to meet Finance and Risk business area's data and analytics needs.
Adept at building strong relationships across Finance and Risk business organizations and enterprise technology partners.
The key responsibility of this role is to lead the Finance Transformation initiative.
This modernization will facilitate the replacement of several vendor applications, including PeopleSoft, the expense management system, and various reporting platforms.
The new platform will be crucial for the future capabilities of the Controller's Office, as well as for Financial Planning, Actuarial Services, Enterprise Risk Management, and Audit functions.
What You'll Do Vision: Sets the long-term 5-year technology vision for Finance and Risk technology and data capabilities including vendor implementation and integrations across business.
This includes product and engineering vision, roadmap to sequence and achieve incremental impactful business outcomes over time.
Leadership: Leads the Finance and Risk technology and its implementation to deliver Finance and Risk technology and data/analytics platform to enable applications, data, analytics, and reporting needs across FRF business.
Stakeholder Management: Collaborates with the business to understand business drivers, strategy, and critical business outcomes for the Finance and Risk business.
Establishes business-aligned goals and leads the team to meet the objectives.
Ability to channel challenging teams, interpersonal conflicts, and cross-departmental political initiatives into opportunities.
Technical leadership: Provides hands-on technical leadership to drive the execution of the future state technology and data vision to delivery.
Demonstrates ability to dive deep into Finance and Risk data technology solutions, data systems architecture, and Data Governance tooling.
Talent and Development: Leads the talent strategy and development of the team.
Responsible for hiring, coaching, mentoring the group, and developing cross functional engineering leaders.
Culture: Build a high-performing culture and embraces NM's behaviors in bringing the best out of people.
Leads with enterprise vision.
Drive: Drives high performing teams and can lead with expertise, energy and empathy.
Defines the Product: Identifies and validates problems and/or opportunities for multiple user groups/scenarios across the company.
Prioritization: Sets long term goals for both the product portfolio and team members.
Manages budgets for optimal business results Demonstrates a strong sense of ownership, urgency, and drive and instills these behaviors within the team.
Acts as an ambassador and representative for Northwestern Mutual's technology organization in community and technology events.
What You'll Bring to the Role Must have 15+ years of professional experience in Application development & programming across multiple languages, frameworks, Solution architecture, implementing large-scale distributed technology and data solutions (on-prem and cloud), and vendor implementations, customizations, integrations in financial services.
Business Acumen: Has a deep understanding of the Finance and Risk areas not limited to technology.
Must have experience in leading through multiple engineering teams and their respective leads.
Experience in ERP and EPM implementations and key industry platforms in this space (SAP, Oracle, Workday, Anaplan, PeopleSoft etc.) Must have 5+ years of combined experience leading engineering and product teams.
Must have 5+ years of experience managing managers.
Must have a product-focused mindset and start-up spirit to execute and deliver business outcomes—experience with earning trust and growing business relationships.
Must have experience creating data strategy and dealing with challenges during its rollout to achieve business outcomes.
Significant production experience working with DataMesh, DataLake, Data warehousing, and cloud data technologies (Snowflake, Databricks etc.) in the financial services.
Strong understanding and hands-on experience with various architecture concepts, application design, cloud data and application technologies, CI/CD, Containerization, deployment technologies, API development, Microservices architecture, and BI Tools.
Experience with PowerBI or reporting tooling strategy is a plus Experience providing direct constructive feedback and conducting periodic performance reviews for the team.
Ability to learn and teach others and employs an organic approach to upskill broader organization.
Can influence technology or business leaders on impactful issues and decisions.
Takes pride in bringing people together for a higher purpose despite ambiguity and organizational boundaries.
Strong communication skills at all levels (verbal and written).
Ability to successfully communicate to technical and non-technical audiences in varying forms and all levels of detail.
Bachelor's Degree or equivalent experience #LI-Hybrid Compensation Range: Pay Range
- Start: $171,500.00 Pay Range
- End: $318,500.00 Geographic Specific Pay Structure: Structure 110: Structure 115: We believe in fairness and transparency.
It’s why we share the salary range for most of our roles.
However, final salaries are based on a number of factors, including the skills and experience of the candidate; the current market; location of the candidate; and other factors uncovered in the hiring process.
The standard pay structure is listed but if you’re living in California, New York City or other eligible location, geographic specific pay structures, compensation and benefits could be applicable, click here to learn more.
Grow your career with a best-in-class company that puts our clients' interests at the center of all we do.
Get started now! Northwestern Mutual is an equal opportunity employer who welcomes and encourages diversity in the workforce.
We are committed to creating and maintaining an environment in which each employee can contribute creative ideas, seek challenges, assume leadership and continue to focus on meeting and exceeding business and personal objectives.
FIND YOUR FUTURE We’re excited about the potential people bring to Northwestern Mutual.
You can grow your career here while enjoying first-class perks, benefits, and our commitment to a culture of belonging.
Flexible work schedulesConcierge serviceComprehensive benefitsEmployee resource groupsPandoLogic.
Keywords: Product Marketing Director, Location: Milwaukee, WI
- 53205
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Missile & Weapon Systems division is seeking a Software Engineering Manager to oversee the Small Diameter Bomb (SDB) software team in St. Charles, MO (St. Louis Metro Area). This Software Manager will lead multiple software teams in the SDB organization, which produces precision-guided weapon systems used by U.S. and allied forces worldwide.
The SDB Software Manager will lead, mentor, and develop a team of software engineers, manage performance in line with Boeing values and behaviors, and foster a culture of innovation, collaboration, and compliance with industry standards and best practices. The role will implement strategic business plans and policies to align teamwork with organizational goals, drive process improvements to boost efficiency and productivity, and manage resource allocation to support software engineering initiatives.
This proactive manager will collaborate with external suppliers, partners, and cross-functional teams to deliver technical solutions that meet customer needs and regulatory requirements, maintain clear communication and strong relationships with customers and stakeholders to ensure alignment on project objectives, and stay current on emerging technologies and industry trends to guide adoption of relevant innovations. The position will also facilitate regular technical reviews and audits, provide oversight and approval of technical approaches, products, and processes, and ensure that the team’s deliverables consistently meet established standards and practices.
Join Us. Protect Our Nation and Partners.
The Precision Strike organization is a strong and growing business that produces world-class software built exceptional software teams developing Operational Flight Software (OFS), mission planning and weapon control software, resident test software, and other real-time embedded and mission-processing software for SDB and related munition systems. Teams develop in languages such as C++, C, Python, and may integrate with C#, Java, and Qt front ends, delivering to target platforms including Linux, VxWorks, and bare-metal embedded targets.
Boeing offers a comprehensive benefits package including substantial Paid Time Off (PTO), flexible work environment, paid parental leave, an Industry Leading 401k matching plan, extremely generous tuition assistance for earning advanced degrees, and paid medical leave programs. For more information, click here.
Position Responsibilities:
Manage software engineering team through the software development life cycle.
Develops and maintains relationships and partnerships with peers, business partners, customers, and other stakeholders.
Oversee software architecture, design, and implementation practices to ensure compliance with Software Engineering Design Practices, safety-critical requirements, and Independent Verification & Validation (IV&V) inputs.
Participate in program operating rhythm to include Program Increment (PI) Planning, program risk/issue/opportunity (RIO) process, and EVMS activities.
Takes a collaborative approach to develop and execute project and process plans, implement policies and procedures, and develop and maintain roadmaps.
Acquires resources for projects and processes and provides oversight and approval of technical approaches in alignment with organizational strategy.
Demonstrate a commitment to the mission and motivation to combine the team’s energy and expertise to achieve a common objective.
Lead technical planning and execution for software scope, schedule, and cost, including Earned Value Management (EVM) duties and reporting.
Basic Qualifications (Required Skills/ Experience):
3+ years of experience managing or leading teams in a software engineering discipline
3+ years of experience with project management principles
Experience in Agile Software Development
Demonstrated ability to provide a high level of customer satisfaction
Preferred Qualifications (Desired Skills/Experience):
Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science or equivalent experience
Strong communication skills – written/verbal
Experience in developing large-scale software systems
Experience developing software for real-time embedded systems
More than 3 years of experience managing projects using Earned Value Management System (EVMS)
Experience in C++ or Ada
Experience working directly with DOD customers or participating in Program Increment (PI) planning and milestone reviews
Experience with software requirement development
Experience working with system/subsystem engineers
Experience working with external software suppliers
Drug Free Workplace:
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Travel:
Less than 10%, if any
Relocation:
This position offers relocation based on candidate eligibility. Note: Basic relocation will be offered for eligible internal candidates.
Conflict of Interest:
Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range for Manager Level (Level K): $160,650 - $217,350
Potential signing bonus for eligible/qualified external candidates.
Applications for this position will be accepted until Mar. 27, 2026
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
