Common Waste Pipe Sizes Jobs in Usa

Compensation details: 18-27 Hourly Wage

PI7eb5405d50dc-31181-39864972

Job Title : Principal Mechanical Design Engineer

Job Family : Mechanical Design Engineering

Organization : Data Center Infrastructure Team

Location : Remote* OR Austin, TX

*Requires up to 30% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

• Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

• Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

• Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

• Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

• Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

• Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

• Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

• Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

• Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

• Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

• Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

• Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

• Lead mechanical design reviews and contribute to cross-functional design validation efforts.

• Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

• Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

• Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

• Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

• Conduct root cause analysis and corrective actions for mechanical failures or field issues.

• Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

• Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

• May perform other duties and responsibilities as assigned

How will you get here? 

Education :

• Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience :

• 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

• Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

• Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

• Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

• Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills

• Creative, self-motivated, accountable, and team-oriented

• Able to work independently with minimal oversight

• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

• Skilled in writing reports, business correspondence, and procedural guides

• Effective at presenting information and responding to management, clients, and public queries

• Capable of influencing others and sharing best practices

• Comfortable working as part of a global team

• Capable of assessing projects, articulating risks, and developing project milestones

• Familiar with stage-gate processes in project lifecycle management (PLCM)

• Able to mentor less experienced engineers

• Ability to travel both domestically and internationally up to 30%

Preferred Qualifications:  

• Master’s Degree in Mechanical Engineering

• Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

• Active Professional Engineer (PE) license.

• Knowledge of regulatory and safety standards applicable to data center infrastructure.

• Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus

Job Title : Principal Mechanical Design Engineer

Job Family : Mechanical Design Engineering

Organization : Data Center Infrastructure Team

Location : Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

• Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

• Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

• Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

• Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

• Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

• Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

• Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

• Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

• Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

• Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

• Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

• Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

• Lead mechanical design reviews and contribute to cross-functional design validation efforts.

• Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

• Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

• Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

• Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

• Conduct root cause analysis and corrective actions for mechanical failures or field issues.

• Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

• Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

• May perform other duties and responsibilities as assigned

How will you get here? 

Education :

• Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience :

• 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

• Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

• Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

• Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

• Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills

• Creative, self-motivated, accountable, and team-oriented

• Able to work independently with minimal oversight

• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

• Skilled in writing reports, business correspondence, and procedural guides

• Effective at presenting information and responding to management, clients, and public queries

• Capable of influencing others and sharing best practices

• Comfortable working as part of a global team

• Capable of assessing projects, articulating risks, and developing project milestones

• Familiar with stage-gate processes in project lifecycle management (PLCM)

• Able to mentor less experienced engineers

• Ability to travel both domestically and internationally up to 30%

Preferred Qualifications:  

• Master’s Degree in Mechanical Engineering

• Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

• Active Professional Engineer (PE) license.

• Knowledge of regulatory and safety standards applicable to data center infrastructure.

• Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus

As a Pipe Journeyman, you will perform pipefitting and pipe welding on commercial and industrial construction projects in the Mobile, AL area. Ability to travel, as needed, for projects

Job Duties

• Lay-out, install, repair, troubleshoot, and maintain piping systems, pipe supports, fixtures, and related hydraulic and pneumatic equipment
• Duties include pipefitting, pipe welding and installation of pipe hangers and related materials
• Ability to work with carbon steel, copper, iron, stainless steel, etc. piping ranging in size up to 10 inches
• Plan installation and repairs to avoid obstructions
• Ability to cut, thread, bend and weld pipe as required by specifications using saws, cutting torches, pipe cutting machines, threading machines, bending tools and machines, and welding torches
• Installation of chilled, hot and steam piping
• Installation of valves, hangers, supports, and flanges inside HVAC piping systems
• Secure pipe to structures with hangers, brackets, and clamps using hand and power tools
• Prepare pipe and fittings for hoisting and rigging
• Able to work off ladders, man lifts and other equipment from various heights
• Perform other related duties or special projects as assigned

Requirements

• 5 or more years of experience working with HVAC piping installation preferred
• 6G certification required
• Experience installing chillers, boilers, and cooling towers
• Experience installing chilled, hot and steam piping
• Familiarity with blueprint, schematic, drawing, and other equipment layout materials
• Experience leading/coaching an Apprentice
• OSHA 10 certification preferred (company will provide if needed)

Additional Requirements

• Maintain a positive, cooperative, and teachable attitude
• Initiative; self-motivated (driven), self-starter
• Complies and promotes company Safety Policy
• Requires basic mechanical aptitude and English language skills
• Analytical and problem-solving skills
• Regular and punctual attendance. Ability to work overtime if needed
• Ability to stand, squat, bend, stoop, and comfortably lift up to 50 lbs
• Ability to pass a full background screening and drug screening
• Ability to pass MVR check and physical ability assessment
• Ability to travel, as needed, for projects

Compensation

• Wage Range Starting at: $26.00+/hr. based on qualifications & experience

Comprehensive Benefits

• Medical, Vision, Dental
• Paid holiday and vacation
• 401(k) Plan with multiple investment options
• Training and Development Programs
• Employee discount programs
• Company-paid and voluntary life insurance
• Company-paid and voluntary accidental death & dismemberment (AD&D)
• Company-paid short-term disability
• Vehicle discount purchase programs

Disclaimer

The above statements are intended to describe the general nature and level of work being performed by employees assigned to this job. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Comfort Systems USA (Southeast), Inc. is an equal opportunity employer in all aspects of employment and prohibits discrimination and harassment of any type to all individuals regardless of race, color, religion, sex, sexual orientation, national origin, age, disability, veteran status, genetic information, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

We strive to foster a work environment that includes and embraces racial, ethnic and gender diversity and other individual differences. Our commitment to diversity and inclusion helps us attract and retain the best talent, enables employees to realize their full potential, and drives high performance through innovation and collaboration.

Radioactive Waste Sales Representative

Houston, Texas | Territory: Texas & Gulf Coast

Position Overview

We are seeking a motivated Radioactive Waste Sales Representative to expand our presence across Texas and the Gulf Coast region. This role is responsible for developing new business opportunities and managing relationships with organizations that generate radioactive materials and radiological waste.

Clients include oil & gas operators, hospitals, universities, research laboratories, industrial facilities, and government agencies. Waste streams may include sealed sources, low-level radioactive waste (LLRW), mixed waste, tritium, and Naturally Occurring Radioactive Material (NORM).

This position requires a consultative sales professional who understands radioactive waste regulations and can guide clients through compliant disposal, transportation, and regulatory requirements.

Key Responsibilities

• Identify and develop new business opportunities with facilities generating radioactive waste across Texas and surrounding markets.

• Build relationships with oil & gas companies, hospitals, research labs, universities, and government organizations.

• Promote radioactive waste disposal services, packaging solutions, transportation, and regulatory support.

• Conduct site visits to evaluate waste streams including sealed sources, mixed waste, contaminated shielding, and LLRW.

• Prepare proposals, pricing, service agreements, and competitive bids.

• Ensure compliance with applicable regulations including the Nuclear Regulatory Commission (NRC), Texas Commission on Environmental Quality (TCEQ), Texas Department of State Health Services (DSHS), and the U.S. Department of Transportation (DOT).

• Work closely with operations, transportation, and compliance teams to deliver safe and efficient waste disposal solutions.

• Maintain CRM records, sales pipeline tracking, and forecasting.

• Represent the company at industry conferences, regulatory meetings, and trade events.

• Stay current with evolving regulations, disposal options, and radioactive waste management trends.

Required Qualifications

• Bachelor’s degree in Business, Environmental Science, Health Physics, Engineering, or related field preferred.

• 2+ years of sales experience in radioactive, radiological, environmental, hazardous waste, or industrial services.

• Knowledge of radioactive material handling and disposal practices.

• Familiarity with regulations involving NRC, TCEQ, DSHS, and DOT.

• Strong relationship-building, negotiation, and communication skills.

• Ability to interpret waste manifests, profiles, and regulatory documentation.

• Valid driver’s license and ability to travel throughout Texas and surrounding territories.

Preferred Experience

• Experience selling Low-Level Radioactive Waste (LLRW) disposal services.

• Existing relationships within Texas oil & gas operators, hospitals, universities, or research institutions.

• Experience working with NORM waste streams common in oil & gas operations.

• Knowledge of EPA hazardous waste regulations (RCRA).

• Proficiency in Microsoft Office and CRM systems.

Why Join Us

• Growing industry with strong demand in energy, healthcare, and research sectors

• Opportunity to work with specialized radioactive waste solutions

• High-impact role supporting regulatory compliance and environmental safety

• Competitive compensation with performance incentives

Stevens Engineers & Constructors has an excellent opportunity for an experienced and highly motivated Project Engineer/Piping Drafter to join our Cleveland Operations Team. The ideal candidate will have project engineering and drafting experience in heavy industrial markets such as steel, aerospace, or chemical processing disciplines for the purpose of coordinating all technical activities for assigned projects. The Project Engineer/Piping Drafter role blends technical drafting with project coordination to ensure piping systems are accurately designed, fabricated, and installed. While a Piping Drafter focuses on creating technical drawings, a Project Engineer oversees the technical and management aspects of the project, including schedules and client coordination.

The ideal candidate will also have a client-focused approach and will work well independently and as part of the project team.

Stevens offers a competitive salary commensurate with experience, along with an excellent benefit package. This is a perfect career opportunity to join an experienced group of professionals that are committed to providing our customers quality project results.

Essential Duties and Responsibilities

Create detailed 2D piping plans, sections, and isometrics using software like AutoCAD.

Develop and update piping & instrumentation diagrams and line lists.

Build CAD models for equipment and new piping systems based on field measurements.

Prepare, transmit and expedite shop drawings, catalog cuts, samples and other submittals for approval. Maintain logs for all.

Coordinate design activities with the project management team to resolve layout conflicts.

Prepare construction document packages.

Conduct QA/QC reviews of all drawings to ensure technical accuracy and code compliance.

Perform field surveys, including manual dimensions, to gather data on existing site conditions.

Provide technical support to construction personnel and fabricators during installation.

Assist in preparing material takeoffs (MTOs) and bill of material (BOM) estimates for procurement.

Helps track project schedules, budgets, and change orders.

Required Skills

Associates in Drafting, Mechanical Engineering, or a related technical field. With 3–5+ years in piping design or mechanical construction.

Mastery of AutoCAD and 3D modeling software.

Knowledge of SpoolFab Piping Software is a plus.

Proficiency in Microsoft Office (Excel, Word) for reporting and documentation.

Strong understanding of industrial piping codes (e.g., ASME, API) and material specifications.

Familiarity with pipe fitting, joining methods, and fabrication processes.

High attention to detail and precision in drafting.

Strong verbal and written communication for collaborating with clients and site teams.

Ability to work in industrial environments, which may include heights or extreme weather

Equal Opportunity Employer

Stevens Engineers & Constructors, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.

We are proud to be a Drug Free Workplace that places Safety First!

Hermanson Company is a standout Mechanical company that has been doing business in the Puget Sound area since 1979. Over the last four decades we have grown from a family owned sheet metal contractor to a partner led full service mechanical construction, design and maintenance provider playing a significant role in the U.S. national construction industry.

By design, Hermanson is a special place to work. Our belief is that people do business with people they like. In keeping with that belief, we strive to hire and retain highly motivated people who are professional, ethically unwavering, and unrelenting in delivering quality results. We are focused on providing a workplace where high performance individuals come together to build dedicated teams driven to accomplish great things for our customers.

People love working at Hermanson, because we all share the same Core Values:

• Clients First – Caring, win-win, value, quality and service attitude
• Family Matters - Safety, wellness, stability, enjoyment and balance
• Character Matters – Integrity, accountability, passionate, and caring
• Team - Trust, honesty, respect, reliable and inclusive
• Appreciate – Each other, our successes, and enjoy the journey
• Learn, Grow, Innovate – Challenge the status quo and always compete

The Role

Periodic travel to fabrication shops and active projects (regional and national as needed)

• This is not a remote role

Reports To

COO (or equivalent senior operations executive)

Role Summary

The Corporate QA/QC Manager is the single corporate authority for quality assurance and quality control across Hermanson’s fabrication and field installation activities. The role owns and governs QA/QC systems supporting piping fabrication, structural steel, skids, sheet metal, plumbing, and general mechanical installation, with an initial and primary emphasis on piping and fabrication shop operations.

Periodic travel to fabrication shops and active projects (regional and national as needed)

This role establishes durable, auditable quality systems that project teams inherit and execute. It is a corporate leadership position, not a project inspection role.

Primary Responsibilities

1. Corporate QA/QC Ownership

• Serve as the company-wide authority for QA/QC, welding, and fabrication quality
• Establish and enforce a unified QA/QC framework across all mechanical trades
• Maintain sole interpretation authority for applicable codes, standards, and company requirements
• Exercise stop-work authority for quality or compliance issues

2. Fabrication & Piping Focus (Initial Priority)

• Own and lead QA/QC system implementation and certification compliance for fabrication shops, with an initial emphasis on piping, skids, and structural steel.
• Ensure shop practices, welding, inspection, and documentation align with approved procedures
• Establish traceability, inspection points, nonconformance, and corrective action processes
• Prepare fabrication operations for audits and owner/EPC review
• Stabilize and integrate AWS, AISC, and ASME programs into one coherent system

3. Certification & Code Compliance Leadership

• Own and maintain quality programs supporting:
• AWS welding requirements
• AISC (STD) structural steel certification
• ASME (B31.1 power piping with Section IX welding only)
• Lead certification applications, audits, surveillance, and corrective actions
• Act as primary interface with auditors, Authorized Inspectors (AI), owners, and EPCs
• Ensure certification scope remains disciplined and free of unnecessary expansion

4. Welding Program Management

• Own the corporate welding program including:
• WPS, PQR, welder qualifications, and continuity
• Alignment between AWS and ASME Section IX requirements
• Ensure welding practices in the shop and field conform to approved procedures
• Determine appropriate use of third-party CWIs, NDT, and specialty inspection services

5. Multi-Trade QA/QC Standards (Phased Expansion)

• Establish corporate QA/QC standards for:
• Sheet metal fabrication and installation
• Plumbing systems
• General mechanical installation work
• Define inspection points, documentation expectations, and acceptance criteria by trade
• Phase implementation to avoid overloading projects while improving consistency
• Audit projects periodically for compliance with corporate standards

6. Training, Audits & Continuous Improvement

• Train shop personnel, project managers, superintendents, and foremen on quality requirements
• Implement nonconformance reporting, corrective action, and root cause processes
• Conduct internal audits and readiness reviews prior to external audits
• Drive continuous improvement across fabrication and field installation

7. Cross-Functional & Strategic Support

• Support estimating, procurement, and operations with code-compliant execution strategies
• Participate in risk reviews where quality, fabrication approach, or certification impacts scope
• Advise executive leadership on quality risk, capability gaps, and future certification needs

Qualifications (Required)

• 10+ years experience in fabrication, welding, piping, or mechanical construction quality
• Demonstrated experience leading QA/QC programs at a corporate or multi-project level
• Proven ownership of audits and corrective actions (AISC and/or ASME preferred)
• Strong working knowledge of piping, structural steel, and mechanical installation practices
• Ability to operate effectively with executives, shop leadership, and field teams

Certifications

• AWS Certified Welding Inspector (CWI): Preferred
• If not held, must be able and willing to obtain within 12 months (company supported)
• Experience with ASME or AISC audits is strongly preferred

This role exists to own, enforce, and sustain quality standards across the enterprise, ensuring durable compliance beyond initial certifications.

Compensation (Seattle Market)

• Base salary: $150,000 – $180,000
• Full benefits package

Success Looks Like

• Fabrication shops operate under controlled, auditable QA/QC systems
• AISC certification achieved and maintained without disruption
• ASME power piping program operating cleanly and defensibly
• Consistent QA/QC standards across piping, sheet metal, plumbing, and installation
• Project teams inherit quality systems rather than reinventing them
• Quality is recognized as a competitive advantage, not overhead

Hermanson provides great employee benefits:

• Very Competitive Compensation w/Bonus
• Medical, dental, vision for employees (coverage available for dependents)
• 401k retirement plan including 3.75% Company Matching
• Vacation and Sick Leave Compensation (PTO), and Holiday Pay!
• Disability income protection
• Employee and dependent life insurance
• Growth & development opportunities
• In-House company training program
• Certificate & Tuition Reimbursement
• Wellness Program
• Employee Assistance Program

Hermanson company LLC is proud to be an Equal Opportunity Employer. Hermanson does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit and business need.

Benefits found in job post

401(k), Medical insurance, Vision insurance, Dental insurance, Tuition assistance, Disability insurance

Title: Civil Engineer (Solid Waste Manager )

Location: Spokane WA

Job type: Fulltime

Salary: Up to $100K + Benefits (Negotiable)

Position overview:

This position is ideal for someone who has gained foundational engineering and design skills and is ready to take the next step in project involvement and technical responsibility.

In this role, you will assist in the planning, design, permitting, and construction oversight of facilities such as landfills, transfer stations, recycling centers, and related site civil works.

You will work closely with senior engineers and project managers, gaining exposure to client coordination, fieldwork, and project delivery. We are looking for someone who is motivated to grow, demonstrates strong technical aptitude, communicates effectively, and thrives in a collaborative and supportive team environment.

Responsibilities:

• Designing waste management facilities, including transfer stations composting sites, landfills, scale facilities, and holding ponds.
• Develop drawings and specifications that consider factors such as types of waste, environmental impacts, and regulatory requirements.
• Preparing engineering reports for waste management systems and processes.
• Preparing designs and calculations for system components related to solid waste management, including stormwater systems, roads, leachate management systems, and miscellaneous infrastructure.
• Conducting 3D computer-aided site modeling for design.
• Conducting engineering calculations for sizing and layout of waste management infrastructure and features.

Qualifications:

• Qualified candidates will have a minimum of a BS in Engineering with 4+ years of engineering experience; Solid Waste Engineering experience and/or consulting experience is preferred.
• AutoCAD Civil 3D design experience is required.
• EI required or the ability to get the required license within six months of hire; PE is preferred.
• Ability to work independently and in a collaborative team environment; offer constructive feedback and take direction, all to support team goals.
• Excellent work ethic and a comprehensive understanding of engineering principles.
• Valid driver’s license and a good driving record.

Benefits and Compensation:

• Competitive Salary
• Bonus Time for Billable Overtime Hours
• Bonus Opportunities
• Mentoring
• Traditional & Roth 401k plans with Immediate Company Match
• Paid Health Insurance for Employee (Medical, Dental, Vision)
• Paid Life Insurance
• Paid Short & Long-term Disability Insurance
• Paid Holidays
• Paid Sick & Vacation Time
• Continuing Education
• Family-Oriented Environment
• Student Loan Repayment Program
• First-Time Home Buyers Program
• Parental Leave

Salary Details: $38.20/hr 

Job Status: Union

Position level: Mid-level

Shift/Schedule Requirements: Must be able to work a variety of shifts including nights, weekends, and holiday periods to meet business needs.

Joining our Maintenance Team means you'll be responsible for effectively installing piping for gas, water, sewer, air and other fixtures required. Must be able to troubleshoot and maintain plumbing systems. 

• Knowledge of troubleshooting, repairs and maintenance of all plumbing systems.
• Steam and hot water boilers.
• Swimming pool, chlorination systems. 
• Gas fired equipment. 
• Winterizing of plumbing and pool systems.
• Operate any equipment relative to piping systems i.e. pipe threader, sewer auger.
• Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Six Flag's Safety guidelines and requirements and reports all unsafe or unusual conditions to supervision.

• Ability to lift/carry: 51 Lbs+ with assistance
• Ability to push/pull (typically on wheeled device such as dolly or cart): 26 - 50 Lbs
• Must be a journeyman plumber in the plumbers union.
• Must have a City of Sandusky plumbing license.
• Works well independently or with others.
• Ability to work various shifts, including days, nights, weekends, holiday periods to meet business needs. 
• Ability to pass a mandatory (or random) drug test, per Company policy, unless prohibited by state or provincial law.
• Ability to pass a background check, if 18 years of age or older, which may include, but is not limited to, credit, criminal, DMV, previous employment, education and personal references, per Company policy, unless prohibited by federal, state, or provincial law.

Salary Details: $38.20/hr 

Job Status: Union

Position level: Mid-level

Shift/Schedule Requirements: Must be able to work a variety of shifts including nights, weekends, and holiday periods to meet business needs.

Joining our Maintenance Team means you'll be responsible for effectively installing piping for gas, water, sewer, air and other fixtures required. Must be able to troubleshoot and maintain plumbing systems. 

• Knowledge of troubleshooting, repairs and maintenance of all plumbing systems.
• Steam and hot water boilers.
• Swimming pool, chlorination systems. 
• Gas fired equipment. 
• Winterizing of plumbing and pool systems.
• Operate any equipment relative to piping systems i.e. pipe threader, sewer auger.
• Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Six Flag's Safety guidelines and requirements and reports all unsafe or unusual conditions to supervision.

• Ability to lift/carry: 51 Lbs+ with assistance
• Ability to push/pull (typically on wheeled device such as dolly or cart): 26 - 50 Lbs
• Must be a journeyman plumber in the plumbers union.
• Must have a City of Sandusky plumbing license.
• Works well independently or with others.
• Ability to work various shifts, including days, nights, weekends, holiday periods to meet business needs. 
• Ability to pass a mandatory (or random) drug test, per Company policy, unless prohibited by state or provincial law.
• Ability to pass a background check, if 18 years of age or older, which may include, but is not limited to, credit, criminal, DMV, previous employment, education and personal references, per Company policy, unless prohibited by federal, state, or provincial law.

Salary Details: $38.20/hr 

Job Status: Union

Position level: Mid-level

Shift/Schedule Requirements: Must be able to work a variety of shifts including nights, weekends, and holiday periods to meet business needs.

Joining our Maintenance Team means you'll be responsible for effectively installing piping for gas, water, sewer, air and other fixtures required. Must be able to troubleshoot and maintain plumbing systems. 

• Knowledge of troubleshooting, repairs and maintenance of all plumbing systems.
• Steam and hot water boilers.
• Swimming pool, chlorination systems. 
• Gas fired equipment. 
• Winterizing of plumbing and pool systems.
• Operate any equipment relative to piping systems i.e. pipe threader, sewer auger.
• Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Six Flag's Safety guidelines and requirements and reports all unsafe or unusual conditions to supervision.

• Ability to lift/carry: 51 Lbs+ with assistance
• Ability to push/pull (typically on wheeled device such as dolly or cart): 26 - 50 Lbs
• Must be a journeyman plumber in the plumbers union.
• Must have a City of Sandusky plumbing license.
• Works well independently or with others.
• Ability to work various shifts, including days, nights, weekends, holiday periods to meet business needs. 
• Ability to pass a mandatory (or random) drug test, per Company policy, unless prohibited by state or provincial law.
• Ability to pass a background check, if 18 years of age or older, which may include, but is not limited to, credit, criminal, DMV, previous employment, education and personal references, per Company policy, unless prohibited by federal, state, or provincial law.

Looking for someone with a fair amount of experience that we can hire on with minimal training. 

Pay would be 20-23$ an hour depending on their experience and weld test results. 

MIG, TIF, and Fluxcore welding processes are what we predominately use. Also be able to fit pipe and experience with pipe drawings. 

Job ID: 517556

Exempt

National Pipe & Plastics, a CRH company, is one of North America’s largest PVC pipe producers, serving the water and energy markets from two east coast locations in Endicott, NY, and Greensboro, NC. But we’re more than just a manufacturer. Our long history of exceptional customer service and product quality enables us to be a trusted and strategic solutions partner to engineers, contractors, distributors, specifiers, and more. As part of the CRH Infrastructure Products business, we are leading the industry with innovative, sustainable solutions with a safety-first mindset.

Job Summary

The Production Supervisor is responsible for leading a manufacturing production team to work injury-free/incident free in a manufacturing environment. They will provide leadership and direction for their team in a way that motivates them to meet all productivity, safety, and quality goals. They are driven to continually improve performance and embrace changes that will help both their team and company meet production standards. They normally will lead a team of 10-20 team members.

Job Location

This position will be located at our plant in Endicott, NY.

Job Responsibilities

• Ensures a safe workplace is maintained and there is a safety mindset in all things we do
• Follows, and ensures others follow, all policies, standards, and safety requirements defined by the company
• Drives safety excellence through promoting employee involvement, ownership, and accountability to proactively eliminate hazards
• Hires, schedules, and supervises full time staff and additional temporary staff
• Provides coaching and corrective feedback timely as well as administers disciplinary processes up to and including termination, as necessary
• Performs timely quarterly and annual reviews for all team members
• Facilitate team development and growth, employee skill development, problem-solving and resolution
• Oversees all process documentation and training program procedures for consistency of operational tasks, and the safety and cleanliness of the workplace
• Ensures a quality product is being produced and all quality processes are being followed
• Works directly with Quality Control, Engineering, and Maintenance, to improve quality, streamline efficiencies and reduce operating expenses
• Tracks productivity for measured efficiency and improvement and operates at or below the budgeted cost for production utilizing lean manufacturing procedures and cross training
• Oversees adherence to inventory control procedures to ensure inventory accuracy goals are constantly achieved
• Assist with troubleshooting and solving production issues
• Performs other duties as requested by management
• Demonstrated leadership in safety & environmental compliance
• Strong analytical, problem-solving, and critical thinking skills
• Ability to coach, develop and build a strong team of employees
• Strong listening and clear communication skills both written and verbal
• Ability to effectively resolve conflict
• Skilled at working effectively with cross functional teams
• Ability to manage multiple priorities simultaneously
• Demonstrated ability to work in a results-oriented environment

Job Requirements

• Minimum one year of supervisory experience required, manufacturing environment preferred
• High school diploma or equivalent required, college degree preferred
• Proficient in Microsoft Office including Word and Excel
• Ability to perform basic mathematical skills such as calculating percentages and volumes

Job Compensation/Benefits

• The annual salary is $70,000-85,000
• $2500 sign on bonus
• Annual bonus opportunity of 5%
• 401(k) plan / group retirement savings program
• Short-term and long-term disability benefits
• Life insurance
• Health, dental, and vision insurance
• Paid time off
• Paid holidays

What CRH Offers You

• Highly competitive base pay
• Comprehensive medical, dental and disability benefits programs
• Group retirement savings program
• Health and wellness programs
• An inclusive culture that values opportunity for growth, development, and internal promotion

About CRH

CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.

If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!

Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.

EOE/Vet/Disability

• CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

Turn Trash into Opportunity — Become a Garbologist

Compactor Rentals of America (CRA) is expanding our nationwide team of Garbologists — sales

professionals with deep waste industry knowledge, strong mechanical curiosity, and the drive to help

customers solve complex waste and recycling challenges.

If you understand waste equipment, waste flow, hauler dynamics, and the ROI behind compactor and baler

programs, this is your next career move.

At CRA, we don’t just rent compactors — we study trash. Our team combines field experience, compactor

science, uptime strategy, and industry innovation to deliver expertise customers can’t get anywhere else.

What You’ll Do

• Identify and acquire new rental opportunities for compactors, balers, and waste handling systems

• Prospect through calls, visits, networking, and Salesforce CRM to build a strong pipeline

• Consult with customers on equipment selection, throughput optimization, and ROI

• Leverage CRA’s Trade-In Program and nationwide ServiceLink Network

• Prepare and deliver rental presentations

• Negotiate terms and close profitable rental agreements

• Attend trade shows and industry events

• Build lasting relationships with operations teams, haulers, brokers, and national accounts

What You Bring

• 2–3+ years in waste, recycling, environmental, or industrial services (required)

• Understanding of compactors/balers or willingness to learn

• Strong track record in outside sales or business development

• Confident communicator with all levels of operations

• CRM experience (Salesforce preferred)

• Valid driver’s license (required)

Compensation

• Base Salary: $75,000

• Uncapped Commission: $150,000–$450,000+ potential

• Monthly Auto & Cell Allowance

• Travel reimbursement

Benefits

• Medical, Dental, Vision Insurance

• Life Insurance

• Short + Long-Term Disability

• PTO

• 401(k)

• Paid Training

• Work-from-home flexibility when not traveling

About CRA

Compactor Rentals of America is the nation’s leading independent compactor and baler rental provider.

Our CRA ServiceLink network of 250+ service partners gives customers nationwide coverage, fast

installation timelines, and dependable equipment uptime.

Become a Garbologist. Turn trash into opportunity — and build a career with the fastest-growing team in

the waste industry.

The ideal candidate schedules, manages, integrates, and purchases for Pipe and Conveyance projects as directed by project managers, superintendents, foremen, and other company leadership.

Responsibilities/Duties

Safety & Risk Management

• Ensure all tasks are carried out in compliance with all safety policies and procedures.
• Attend safety meetings and talk with field management and crews about safety.
• Immediately address and then educate on any unsafe conditions or acts whether observed or brought to your attention.
• Engage in all tasks with a safety-first mindset.
• Abide by the Company’s Fleet Driving Policy.

Project Management

• Assist Project Manager with preparation and completion of weekly updates on reports and quantities.
• Review submittals for conformance to contract documents.
• Maintain Submittal Log & Inventory Control Log
• Inventory Control, material verification and conformation
• Tracks material & equipment delivery.
• Accurately track project issues and maintain documentation.
• Maintain accurate RFI logs weekly.
• Prepare progress meeting agendas; keep, distribute, and save accurate meeting minutes.
• Review correspondences and requests from engineer and owner for changes of work.
• Maintain subcontractor and owner change orders.
• Invoice review and coding
• Assist Project Manager in completing subcontracts and purchase orders for buyout process.
• Assist subcontractor with scheduling and communication.
• Actively assist project superintendent with progress reporting.
• Assists with completion and project closeouts.
• Assist superintendent in getting timely and accurate material deliveries.
• Obtain all required project permits.
• Assist in change management process.
• Field Use drawings

Leadership

• Participate in regular owner, subcontractor, and engineer meetings.
• Actively communicate with owners regarding their needs and questions throughout a project.
• Anticipate and solve problems with a positive mindset and focus on solutions.
• Hold yourself to uncompromising standards, personally and professionally.
• Coach, mentor, and train all jobsite personnel.
• Consistently build strong positive relationships with clients, inspectors, subcontractors, and crews.

Required Qualifications

• Bachelor’s degree in engineering, construction management, or equivalent
• Strong working knowledge of Outlook, Excel, Word, PowerPoint, AutoCAD, ProCore, etc.
• Maintain a valid driver’s license and safe driving record
• Experience planning and scheduling
• Ability to prepare a subcontractor scope of work
• Experience with pricing, purchasing, negotiating, and preparing purchase orders for materials and equipment
• Experience reading and understanding drawings
• Team-focused
• Strong leadership, motivation, planning, teamwork, collaboration, communication, and conflict-resolution skills
• Safe work or No work mindset; fully committed to safety and jobsite standards, policies, and processes.

T. A. Loving Company is committed to creating an inclusive environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, or any other characteristic protected by federal, state, or local law.