Standard Waste Pipe Sizes Jobs in Usa

Action Carting Environmental Services/ Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Pennsylvania, and Ohio. We cater to a diverse range of industrial, medical, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety.

What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture.

We are seeking a Waste Collection CDL Driver who will be working out of our Brooklyn Depot (1427 Ralph Ave, Brooklyn, NY 11236) and reporting to the Site Manager but is also subject to supervision by Route Supervisors and Dispatchers. This is a full time, Union, non-exempt, hourly position with an overnight schedule starting anywhere between 7pm and 9pm but may vary depending on business needs. Shifts may vary from 10 to 12 hours per evening or until the route is complete.

Working alongside a Helper, our Waste Collection CDL Drivers main responsibility is to safely operate a rear-loading truck, for the pick-up service of bags or containers filled with waste or recyclable material. Drivers transport the material to a disposal, transfer or recycle facility, and may make one or more trips throughout the shift.

• The driver is responsible for safely operating the truck in compliance with IWSs safety standards as well as OSHA and DOT regulations, and local traffic laws.
• Performs pre- and post-trip inspections of assigned vehicle using utilizing standard DVIR (Driver Vehicle Inspection Report); notes all issues on DVIR form for corrective review/repair.
• Ensuring that the container and its content are always secure. This includes periodically checking tarps and ties, and may require the driver to climb onto containers and/or reach overhead.
• Perform pre- and post-route inspections of assigned truck and document any safety issues on standard reports.
• Continuously monitor for safety and service-related issues, as well as containers of other equipment in need of repair, and report any issues to the Route Supervisor or Dispatch.
• All IWS employees are expected to be responsible and accountable for the safety for themselves, their colleagues, the trucks, and other equipment and property. Drivers must immediately notify Route Supervisor or Dispatch of any incidents, accidents, injuries, or property damage.
• Communicate professionally with customers and Dispatchers at all times. This includes receiving complaints about schedules and quality of service. Our Drivers must make note of and report on any such complaints and respond in a courteous and respectful manner.
• Attend all required training, operational meetings, and mandatory monthly Safety Meetings
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards
• Performs other duties as assigned.

• Applicants must be at least 21 years of age and legally eligible to work in the United States.
• All Drivers must have a valid Class A or B CDL and a clean driving record.
• At least 1 year of experience operating a vehicle requiring a CDL A or B, within the last 7 years. Experience as a Driver or Helper for a refuse company is highly preferred.
• Working knowledge of DOT, OSHA and applicable traffic regulations.
• Must be able to speak and read English well enough to converse with the general public, understand highway traffic and signals, respond to official questions, and be able to make legible entries on reports and records.
• Must be able to read and understand a map
• Must be able to meet the physical and safety requirements of the position.
• Must be willing and able to work required worked hours as allowed under DOT regulation and may include weekend, night, and/or holiday work.

Physical Requirements

• The Driver position may be required to lift up to 50 pounds, as well as mount and dismount the truck multiple times every route.
• Must be able to work outdoors in all kinds of weather.
• Drivers must be able to physically mount and dismount the truck throughout the duration of the workday

Action Carting Environmental Services/ Interstate Waste Services is proud to be a Union organization as well as a Second Chance Employer and are committed to creating a supportive and collaborative work environment. We offer a competitive salary commensurate with experience and a comprehensive benefits package. The benefits package includes medical/dental/vision offerings, life insurance, flexible spending accounts, and a 401K plan. Our employees also receive Paid Vacation, Holidays, and Personal Days.

Action Carting Environmental Services/ Interstate Waste Services provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws.
Drug-Free Workplace.

Action Carting Environmental Services/ Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Pennsylvania, and Ohio. We cater to a diverse range of industrial, medical, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety.

What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture.

We are seeking a Waste Collection CDL Driver who will be working out of our Jersey City Depot (264 Broadway, Jersey City, NJ 07306) servicing NYC Routes and reporting to the Site Manager but is also subject to supervision by Route Supervisors and Dispatchers. This is a full time, Union, non-exempt, hourly position with an overnight schedule starting anywhere between 7pm and 9pm but may vary depending on business needs. Shifts may vary from 10 to 12 hours per evening or until the route is complete. This Depot will be servicing our NYC routes.

Working alongside a Helper, our Waste Collection CDL Drivers main responsibility is to safely operate a rear-loading truck, for the pick-up service of bags or containers filled with waste or recyclable material. Drivers transport the material to a disposal, transfer or recycle facility, and may make one or more trips throughout the shift.

• The driver is responsible for safely operating the truck in compliance with IWSs safety standards as well as OSHA and DOT regulations, and local traffic laws.
• Performs pre- and post-trip inspections of assigned vehicle using utilizing standard DVIR (Driver Vehicle Inspection Report); notes all issues on DVIR form for corrective review/repair.
• Ensuring that the container and its content are always secure. This includes periodically checking tarps and ties, and may require the driver to climb onto containers and/or reach overhead.
• Perform pre- and post-route inspections of assigned truck and document any safety issues on standard reports.
• Continuously monitor for safety and service-related issues, as well as containers of other equipment in need of repair, and report any issues to the Route Supervisor or Dispatch.
• All IWS employees are expected to be responsible and accountable for the safety for themselves, their colleagues, the trucks, and other equipment and property. Drivers must immediately notify Route Supervisor or Dispatch of any incidents, accidents, injuries, or property damage.
• Communicate professionally with customers and Dispatchers at all times. This includes receiving complaints about schedules and quality of service. Our Drivers must make note of and report on any such complaints and respond in a courteous and respectful manner.
• Attend all required training, operational meetings, and mandatory monthly Safety Meetings
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards
• Performs other duties as assigned.

• Applicants must be at least 21 years of age and legally eligible to work in the United States.
• All Drivers must have a valid Class A or B CDL and a clean driving record.
• At least 1 year of experience operating a vehicle requiring a CDL A or B, within the last 7 years. Experience as a Driver or Helper for a refuse company is highly preferred.
• Working knowledge of DOT, OSHA and applicable traffic regulations.
• Must be able to speak and read English well enough to converse with the general public, understand highway traffic and signals, respond to official questions, and be able to make legible entries on reports and records.
• Must be able to read and understand a map
• Must be able to meet the physical and safety requirements of the position.
• Must be willing and able to work required worked hours as allowed under DOT regulation and may include weekend, night, and/or holiday work.

Physical Requirements

• The Driver position may be required to lift up to 50 pounds, as well as mount and dismount the truck multiple times every route.
• Must be able to work outdoors in all kinds of weather.
• Drivers must be able to physically mount and dismount the truck throughout the duration of the workday

Action Carting Environmental Services/ Interstate Waste Services is proud to be a Union organization as well as a Second Chance Employer and are committed to creating a supportive and collaborative work environment. We offer a competitive salary commensurate with experience and a comprehensive benefits package. The benefits package includes medical/dental/vision offerings, life insurance, flexible spending accounts, and a 401K plan. Our employees also receive Paid Vacation, Holidays, and Personal Days.

Action Carting Environmental Services/ Interstate Waste Services provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws.
Drug-Free Workplace.

Action Carting Environmental Services/ Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Pennsylvania, and Ohio. We cater to a diverse range of industrial, medical, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety.

What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture.

We are seeking a Waste Collection Roll Off Driver who will be working out of our Jersey City Depot (264 Broadway, Jersey City, NJ 07306) servicing NYC Routes and reporting to the Site Manager but is also subject to supervision by Route Supervisors and Dispatchers. This is a full time, Union, non-exempt, hourly position with an overnight schedule starting anywhere between 7pm and 9pm, Sunday evening through Friday evening but may vary depending on business needs. Shifts may vary from 10 to 12 hours per evening or until the route is complete.

Our Waste Collection Roll-Off Drivers main responsibility is to safely operate a Roll-Off Truck, for the pick-up service of containers filled with waste or recyclable material. Drivers transport the material to a disposal, transfer or recycle facility, and may make one or more trips throughout the shift. A minumum of 1 year of experience driving and operating a Roll Off Truck is required.

• Continuously monitor for safety and service-related issues, as well as containers or other equipment in need of repair, and report any issues to the Route Supervisor or Dispatch.
• All employees are expected to be responsible and accountable for the safety for themselves, their colleagues, the trucks, and other equipment and property. Drivers must immediately notify Route Supervisor or Dispatch of any incidents, accidents, injures, or property damage.
• Performs pre- and post-trip inspections of assigned vehicle using utilizing standard DVIR (Driver Vehicle Inspection Report); notes all issues on DVIR form for corrective review/repair.
• Communicate professionally with customers and Dispatchers at all times. This includes receiving complaints about schedules and quality of service. Our Drivers must make note of and report on any such complaints and respond in a courteous and respectful manner.
• Notifies Dispatch or Route Manager of issues as prescribed by Service Machine protocol, including blocked containers, potential missed pick-ups or problems that arise on the route.
• Communicates customer requests or issues to Dispatch or Route Manager.
• Completely dumps all containers and leaves the customers location clean and free of debris.
• Completes and submits customer tickets when excess yardage must be removed.
• Positions containers on the customers property in a manner that ensures lids are properly replaced, containers are set in an upright position, and containers do not block driveway entrances or traffic.
• Work closely with Route Supervisor to improve route efficiencies and identify best practices.
• Attend all required training, operational meetings, and mandatory monthly Safety Meetings
• Maintain a clean, safe work area in compliance with Corporate / OSHA Standards
• Performs other duties as assigned.

Physical Requirements

• The Driver position may be required to lift up to 50 pounds, as well as mount and dismount the truck multiple times every route.
• Must be able to work outdoors in all kinds of weather.
• Drivers must be able to physically mount and dismount the truck throughout the duration of the workday.

• Applicants must be at least 21 years of age and legally eligible to work in the United States.
• All Drivers must have a valid Class A or B CDL with airbrake endorsement, and a clean driving record.
• At least 1 year of experience operating a vehicle requiring a CDL A or B, within the last 7 years. Experience as a Driver or Helper for a refuse company is highly preferred.
• At least 1 year of experience driving and operating a Roll Off Truck
• Working knowledge of DOT, OSHA, and applicable traffic regulations.
• Must be able to speak and read English well enough to converse with the public, understand highway traffic and signals, respond to official questions, and be able to make legible entries on reports and records.
• Must be able to read and understand a map.
• Must be able to meet the physical and safety requirements of the position.
• Must be willing and able to work required worked hours as allowed under DOT regulation and may include weekend, night, and/or holiday work.

Action Carting Environmental Services/ Interstate Waste Services is proud to be a Union organization as well as a Second Chance Employer and are committed to creating a supportive and collaborative work environment. We offer a competitive salary commensurate with experience and a comprehensive benefits package. The benefits package includes medical/dental/vision offerings, life insurance, flexible spending accounts, and a 401K plan. Our employees also receive Paid Vacation, Holidays, and Personal Days.

Action Carting Environmental Services/ Interstate Waste Services provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws.
Drug-Free Workplace.

• Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites;
• Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems;
• Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press);
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
• Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
• Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld.
• Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications.
• Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
• Fill holes, and increase the size of metal parts.
• Detect faulty operation of equipment or defective materials and notify supervisors.
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
• Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
• Mark or tag material with proper job number, piece marks, and other identifying marks as required.
• Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools.
• Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
• Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
• Preheat work pieces prior to welding or bending, using torches or heating furnaces.
• Hammer out bulges or bends in metal work pieces.
• Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
• Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
• Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
• Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials.
• Set up and use ladders and scaffolding as necessary to complete work.
• Use fire suppression methods in industrial emergencies.
• Detect faulty operation of equipment or defective materials and notify supervisors;
• Direct helpers or apprentices in appropriate tasks;
• Must maintain strict adherence to safety rules and quality;
• Participate in site housekeeping;
• Interact with co-workers in an attentive courteous manner;
• Additional duties as directed by management.
  

• Ability to work independently or as part of a team;
• Experience: 5 years of Field Experience, trade school or apprenticeship;
• Knowledge of materials, methods and tools involved in industrial construction;
• Attention to detail;
• Ability to keep hand and arm steady;
• Be highly focused on customer satisfaction expectations;
• Good documentation and record keeping;
• Preparation of miscellaneous paperwork including time sheets, daily reports and material requests;
• Competency in Permit Required Confined Space;
• Understanding of and strict adherence to daily Job Hazard Analysis (JHA);
• Appropriate state certification or license;
• OSHA 10 certification.
  

• Industrial manufacturing facilities Power generating facilities
• Chemical manufacturing Healthcare & Institutional
• Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces
  

Hiring: Pipe Designer – Detroit, MI

Location: Detroit, MI

Contract‑to‑Perm

We’re seeking an experienced Pipe Designer with strong AutoCAD Plant 3D, Navisworks, and point‑cloud/laser‑scan modeling skills. This role supports 2D/3D piping design, field verification, and collaboration across multidisciplinary teams.

Key Responsibilities:

• Produce 2D/3D piping layouts, isometrics, and spool drawings
• Work in AutoCAD Plant 3D, Navisworks, and ReCap with point‑cloud data
• Interpret P&IDs, drawings, surveys, and laser scans
• Conduct field walkdowns and measurements
• Ensure design accuracy, quality checks, BOMs, and line list support
• Coordinate with structural, mechanical & civil teams

Requirements:

• 5–20 years of piping design experience
• Proficiency in AutoCAD Plant 3D, Navisworks, ReCap
• Strong understanding of piping materials, valves & ASME standards
• Experience with industrial, refinery, chemical, or heavy‑manufacturing facilities

Ability to work onsite for field validation

• Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment.
• Select and execute best method to prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter and to clean, degrease, deoxidize, or desmut weld joint or work piece, using wire brush, portable grinder, or solvent clean/chemical bath
• Weld completion in flat, horizontal, vertical, or overhead positions for at least three base materials using a wide variety of processes.
• Fabricate brackets, panels, complex beams and shape structures.
• Plumb transverse bulkheads and panels to fabricate enclosures, complex weldments, shapes, plates, simple and complex parts from a drawing or sketch.
• Operate and set up of the following equipment; hydraulic jacks and pumps, chain falls, come a longs, Steamboat Ratchets, and slings.
• Expertly repair base metal products and completed welds by adding the minimum amount of weld metal or heat and the minimum amount of grinding/smoothing to meet job specification.
• Also perform air-arc back gouging and oxy-acetylene torching (e.g. brazing, cutting, or pre-heating), GTAW (Gas Tungsten Arc Welding), and pipe welding, pipe flange and socket welding; as well as qualify to perform either flux cored inner shield welding, weld overlay cladding, automated back gouging, plasma back gouging or any combination thereof.
• Mark or tag material with proper job number, piece marks, and other identifying marks as required and always mark completed welds with welder number.
• Perform single pass 5/16-inch minimum fillet welds in all positions using FCAW on carbon steel and at least -inch single-pass fillets on two other materials.
• Supervise set up to perform welding in accordance with applicable WPS all welding equipment such as: wire feeders, Sub-arc tractors, Bug O's, Power sources, etc.
• Clean torches and connect/lay-out cables and whips to optimize performance and perform routine maintenance on all equipment.
• Recommend WPSs and WPS upgrades required for a job; when assigned, produces or supervises production, documentation, and testing of PQRs and WPQs.
• Reliable, leads by example; trains less-killed welders, enforces good workmanship and safe welding practices throughout the work area; identifies gaps in weld process controls and weld process surveillance inspections and recommends corrective action.
• Perform comprehensive workmanship inspection, and when directed those of others, of all welds grinding and joint preparation for NDT processes as applicable; observe QA/NDT hold points as applicable.
• Complete standard dimensional computations/ Devise bracing and weld sequencing steps to maintain tolerances and minimize distortions.
• Other duties as assigned.
  

• Must have at least seven (7) years of Pipe Welding experience.
• Must have experience working in physically demanding environments.
• Must have at least 3 years of experience using SMAW (Shielded Metal Arc Welding) or Gas Tungsten Arc (GTAW) welding.
  

• Prefer certifications in all positions using the SMAW and GTAW welding processes.
• Prefer the ability to fuse inserts and weld carbon steel, stainless steel and copper nickel pipe using the SMAW and GTAW (Gas Tungsten Arc Welding) processes.
  

• Must be able to obtain and maintain access to government installations (DBIDS).
  

• Minimal Travel; 10% or less.
  

• Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs.
• Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.
• May ride ships at sea for extended periods
• Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels.
• Frequent exposure to noise due to machinery and equipment.
• Employee is required to operate trucks, forklifts & man-lifts.
• While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl.
• Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation
• Frequent use of respirator.
• Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.
  

Stevens Engineers & Constructors has an excellent opportunity for an experienced and highly motivated Project Engineer/Piping Drafter to join our Cleveland Operations Team. The ideal candidate will have project engineering and drafting experience in heavy industrial markets such as steel, aerospace, or chemical processing disciplines for the purpose of coordinating all technical activities for assigned projects. The Project Engineer/Piping Drafter role blends technical drafting with project coordination to ensure piping systems are accurately designed, fabricated, and installed. While a Piping Drafter focuses on creating technical drawings, a Project Engineer oversees the technical and management aspects of the project, including schedules and client coordination.

The ideal candidate will also have a client-focused approach and will work well independently and as part of the project team.

Stevens offers a competitive salary commensurate with experience, along with an excellent benefit package. This is a perfect career opportunity to join an experienced group of professionals that are committed to providing our customers quality project results.

Essential Duties and Responsibilities

Create detailed 2D piping plans, sections, and isometrics using software like AutoCAD.

Develop and update piping & instrumentation diagrams and line lists.

Build CAD models for equipment and new piping systems based on field measurements.

Prepare, transmit and expedite shop drawings, catalog cuts, samples and other submittals for approval. Maintain logs for all.

Coordinate design activities with the project management team to resolve layout conflicts.

Prepare construction document packages.

Conduct QA/QC reviews of all drawings to ensure technical accuracy and code compliance.

Perform field surveys, including manual dimensions, to gather data on existing site conditions.

Provide technical support to construction personnel and fabricators during installation.

Assist in preparing material takeoffs (MTOs) and bill of material (BOM) estimates for procurement.

Helps track project schedules, budgets, and change orders.

Required Skills

Associates in Drafting, Mechanical Engineering, or a related technical field. With 3–5+ years in piping design or mechanical construction.

Mastery of AutoCAD and 3D modeling software.

Knowledge of SpoolFab Piping Software is a plus.

Proficiency in Microsoft Office (Excel, Word) for reporting and documentation.

Strong understanding of industrial piping codes (e.g., ASME, API) and material specifications.

Familiarity with pipe fitting, joining methods, and fabrication processes.

High attention to detail and precision in drafting.

Strong verbal and written communication for collaborating with clients and site teams.

Ability to work in industrial environments, which may include heights or extreme weather

Equal Opportunity Employer

Stevens Engineers & Constructors, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.

We are proud to be a Drug Free Workplace that places Safety First!

• 
  
• Visually inspect all components prior to assembly for compliance to work order specifications, and for burrs, defects, and cleanliness.
  
• Calculate the cut length of iso-bend pipe to achieve the correct finish length and mark the cut-off points.
  
• Secure iso-bend pipe and cut to length with pipe cutting tool.
  
• Set-up pipes sever machine and cut pipe to length without cutting the liner.
  
• Install the correct flange/stub end combination and weld pipe housing in accordance with manufacturing and customer supplied specifications.
  
• Recheck overall spool length with allowance for liner thickness and complete the inspection sheet.
  
• Assemble and tack weld fitting and special products using a press or other appropriate tooling.
  
• Weld fittings and special products complete in accordance with manufacturing and customer supplied specifications.
  
• Perform all welding in the position as specified by the Procedure and welder qualification.
  
• Set-up welders with correct filler wire and compressed gas at the proper pressure setting.
  
• When required, assemble, tack and tig weld fittings in accordance with manufacturing procedures.
  
• Use blueprint reading skills to interpret engineering or customer supplied drawings and specifications.
  
• Use ability to read measuring instruments not limited to, but including tape measure, micrometers, and calipers.
  
• Verify protective shield and restricted area signs are in place before welding.
  
• Perform material handling functions using hand trucks and carts.
  

• 
  
• High School Diploma, GED, or equivalent.
  
• Must be able to lift parts weighing up to 50 lbs without assistance, any parts weighing over 50lbs requires a team lift.
  
• Fabrication experience and the ability to work from blueprints and sketches.
  
• Must pass Crane welding qualifications test, which includes a plate test (fillit welds) on an 8-inch coupon, schedule 40 pipe, open root, 3 passes (root downhill, hot pass uphill, cover pass uphill, and must pass X-ray requirements.
  

• 
  
• Five or more years welding experience in a manufacturing environment.
  
• ASME Section IX MIG certification or be able to obtain certification within a reasonable period.
  
• Three or more years' experience with carbon steel.
  

Job ID: 517556

Exempt

National Pipe & Plastics, a CRH company, is one of North America’s largest PVC pipe producers, serving the water and energy markets from two east coast locations in Endicott, NY, and Greensboro, NC. But we’re more than just a manufacturer. Our long history of exceptional customer service and product quality enables us to be a trusted and strategic solutions partner to engineers, contractors, distributors, specifiers, and more. As part of the CRH Infrastructure Products business, we are leading the industry with innovative, sustainable solutions with a safety-first mindset.

Job Summary

The Production Supervisor is responsible for leading a manufacturing production team to work injury-free/incident free in a manufacturing environment. They will provide leadership and direction for their team in a way that motivates them to meet all productivity, safety, and quality goals. They are driven to continually improve performance and embrace changes that will help both their team and company meet production standards. They normally will lead a team of 10-20 team members.

Job Location

This position will be located at our plant in Endicott, NY.

Job Responsibilities

• Ensures a safe workplace is maintained and there is a safety mindset in all things we do
• Follows, and ensures others follow, all policies, standards, and safety requirements defined by the company
• Drives safety excellence through promoting employee involvement, ownership, and accountability to proactively eliminate hazards
• Hires, schedules, and supervises full time staff and additional temporary staff
• Provides coaching and corrective feedback timely as well as administers disciplinary processes up to and including termination, as necessary
• Performs timely quarterly and annual reviews for all team members
• Facilitate team development and growth, employee skill development, problem-solving and resolution
• Oversees all process documentation and training program procedures for consistency of operational tasks, and the safety and cleanliness of the workplace
• Ensures a quality product is being produced and all quality processes are being followed
• Works directly with Quality Control, Engineering, and Maintenance, to improve quality, streamline efficiencies and reduce operating expenses
• Tracks productivity for measured efficiency and improvement and operates at or below the budgeted cost for production utilizing lean manufacturing procedures and cross training
• Oversees adherence to inventory control procedures to ensure inventory accuracy goals are constantly achieved
• Assist with troubleshooting and solving production issues
• Performs other duties as requested by management
• Demonstrated leadership in safety & environmental compliance
• Strong analytical, problem-solving, and critical thinking skills
• Ability to coach, develop and build a strong team of employees
• Strong listening and clear communication skills both written and verbal
• Ability to effectively resolve conflict
• Skilled at working effectively with cross functional teams
• Ability to manage multiple priorities simultaneously
• Demonstrated ability to work in a results-oriented environment

Job Requirements

• Minimum one year of supervisory experience required, manufacturing environment preferred
• High school diploma or equivalent required, college degree preferred
• Proficient in Microsoft Office including Word and Excel
• Ability to perform basic mathematical skills such as calculating percentages and volumes

Job Compensation/Benefits

• The annual salary is $70,000-85,000
• $2500 sign on bonus
• Annual bonus opportunity of 5%
• 401(k) plan / group retirement savings program
• Short-term and long-term disability benefits
• Life insurance
• Health, dental, and vision insurance
• Paid time off
• Paid holidays

What CRH Offers You

• Highly competitive base pay
• Comprehensive medical, dental and disability benefits programs
• Group retirement savings program
• Health and wellness programs
• An inclusive culture that values opportunity for growth, development, and internal promotion

About CRH

CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.

If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!

Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.

EOE/Vet/Disability

• CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

Public Companies • Micro-Cap & Small-Cap • PIPEs • Uplisting • M&A • SEC Compliance

Hybrid / Remote | Entrepreneurial Platform

We are representing a fast-growing, entrepreneurial corporate and securities law firm that operates at the intersection of capital markets, M&A, and growth-stage public companies. The firm is a recognized leader in micro-cap and small-cap public company transactions, advising U.S. and international issuers, investors, placement agents, and funds on complex financings, exchange listings, and strategic transactions.

This is an opportunity for a deal-running securities lawyer who understands how capital is raised and transactions are closed in the lower-middle-market public company ecosystem — not just blue-chip IPOs.

The Practice

The firm serves as outside general counsel and capital-markets quarterback to micro-cap, small-cap, and growth-stage public companies seeking access to U.S. capital markets and institutional investors. The platform handles:

• Reverse mergers and alternative public offerings
• PIPEs, structured equity & convertible debt financings
• Uplisting from OTC, TSX, AIM, and other markets to NASDAQ or NYSE
• Initial and secondary public offerings
• Resale registration statements and follow-on financings
• Public company M&A, asset sales, and strategic investments
• Balance-sheet restructurings, recapitalizations, and equity clean-ups

These matters often involve thinly traded securities, cross-border issuers, complex capital structures, and simultaneous financings, requiring attorneys who understand both the business reality and the regulatory framework.

What You’ll Do

You will act as lead capital-markets and securities counsel on high-volume, deal-driven matters, including:

• Structuring and documenting PIPEs, registered directs, and private placements
• Drafting and reviewing S-1s, resale registration statements, 10-Ks, 10-Qs, 8-Ks, and prospectuses
• Managing NASDAQ, NYSE, SEC, and FINRA processes tied to uplistings and financings
• Advising boards and management on corporate governance, disclosure, and fiduciary duties
• Supporting M&A and recapitalization transactions tied to capital raises
• Working directly with CEOs, investors, placement agents, and underwriters

This is a front-line deal role, not a back-office compliance position.

Who This Is For

This role is ideal for a senior associate, counsel, or junior partner who:

• Has 7–10+ years of securities and capital markets experience
• Has worked with micro-cap, small-cap, or growth-stage public companies
• Is comfortable running PIPEs, reverse mergers, uplistings, and follow-on offerings
• Wants client ownership, deal flow, and upside, not a narrow SEC-reporting silo

Why This Platform Is Different

This firm is built around closing transactions in difficult capital markets, offering:

• Direct relationships with funds, placement agents, and exchanges
• Creative fee structures (flat, hybrid, equity-based) aligned with deal success
• Deep experience in thinly-traded and cross-border issuer markets
• Real business-development opportunity with capital-hungry clients
• An entrepreneurial culture focused on getting deals done

Explore Confidentially

If you are a capital-markets attorney who understands the micro-cap and small-cap ecosystem and wants to run deals in a platform built for transaction velocity and client growth, we welcome a discreet conversation.

Apply to start a confidential discussion.