Calibre Jobs in Usa
866 positions found — Page 47
- use your entrepreneurial skills and team mindset to come up with data-driven solutions
- build and lead an agile team to deliver the advanced technology that drives the future
- create a culture of trust, encourage diversity of thought and foster leadership in others
- be part of the historic transformation of the automotive industry.
***** During training and initial launch, the operating pattern will be an 8-10 hour shift schedule and then transition to a 12-hour shift schedule. *****
What you'll do...
Key responsibilities may include:
- Preventative Maintenance:
o Regularly inspecting, cleaning, lubricating, and performing scheduled maintenance on production equipment like mixing machines, coating machines, clean rooms, and assembly robots to prevent breakdowns.
o Work on continuous process improvements to ensure the line is operating at its designed level at all times.
- Troubleshooting and Repair:
o Diagnosing and resolving mechanical, electrical, pneumatic, and hydraulic issues with production equipment, including identifying root causes and implementing corrective actions.
- Equipment Calibration:
o Performing routine calibrations on critical measurement devices to ensure accuracy in the production process.
- Quality Control:
o Monitoring production processes to identify potential quality defects and taking corrective actions to maintain product quality standards.
- Data Analysis:
o Interpreting equipment performance data to identify areas for improvement and implement optimization strategies.
- Safety Compliance:
o Adhering to all safety procedures, wearing required personal protective equipment (PPE), and reporting any safety hazards immediately.
- Documentation:
o Maintaining detailed records of maintenance activities, repairs, and parts used.
- Collaboration:
o Working closely with production operators, engineers, and other maintenance technicians to identify and address equipment issues.
You'll have...
Required Skills and Qualifications:
Minimum requirements:
- Department of Labor or State Recognized Certification or Military Equivalent
- Previous industrial electrical experience or combination of previous work experience and training equivalent
- Working knowledge of Industrial Electronics and National Electrical Codes
- Advanced knowledge of all electrical systems
- Intermediate computer skills, reading, and interpreting data
- Ability to work rotating shifts, extended hours, and weekends as necessary
Even better, you may have...
Preferred requirements:
- Expert knowledge in mechanical and/or electrical systems
- Advanced computer skills, reading, and data interpretation
- Fundamental knowledge of PLC (Siemens, Rockwell, etc.)
- Knowledge and skills of conveyor, drive, robots, and computers
You may not check every box, or your experience may look a little different from what we've outlined, but if you think you can bring value to Ford Motor Company, we encourage you to apply!
Rate of Pay and Benefits: $46.25 per hour
* Bonus Program - Performance-based bonus program recognizing the work you do every day
* Employee Experience - Recognition programs and activities which focus on your importance to our success
* 401(k) Retirement Savings Plan - Company matches 100% of first 5% of base wages contributed, and additional Company contributions
* Paid Time Off
* Up to four weeks of Vacation each year as you grow with the Company
* Holidays and Wellness (sick) days
* New Parent Leave following birth, adoption, or foster placement of a child
* Health
* Medical, Dental and Vision insurance for you and your family, beginning with your date of hire
* Health Care Flexible Spending Account
* Mental health and wellness counseling
* Life Insurance - Company-provided Basic Life and Accidental Death and Dismemberment insurance; additional coverage available
* Disability - Company-provided Short-term Disability coverage; additional coverage available
* Ford Vehicle Discounts - Save on new Ford vehicle purchases for you, your family and your friends
* Discounts on insurance (e.g. homeowners', auto, pet, legal)
Visa sponsorship is not available for this position.
Candidates for positions with Ford Motor Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.
We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please call 1-888-336-0660.
#LI-Onsite
#LI-LW1
PURPOSE AND SCOPE:
The Inpatient RN provides direct patient care in accordance to company policies and procedures which includes FMCNA compliance programs and contracted hospitals’ policies and procedures. Areas of practice are diverse, including, but not limited to, hemodialysis, peritoneal dialysis, continuous renal replacement therapies, apheresis, and ultrafiltration. The Inpatient RN will partner with the hospital to provide quality care to the patient and deliver care that provides a positive patient experience.
PRINCIPAL DUTIES AND RESPONSIBILITIES:
- Under limited supervision, applies considerable knowledge to perform a broad range of tasks which include but are not limited to direct patient care in multiple modalities not limited to hemodialysis, peritoneal dialysis, ultrafiltration, continuous renal replacement therapy, and Apheresis.
- Provides supervision and direction of Patient Care Technicians and clerical staff; provides direction and education to ICU staff for CRRT.
- Responsible for direct patient care of assigned patients in the Inpatient Renal Replacement and Apheresis Services setting and providing the appropriate treatment technique for assigned patients as prescribed in all modality procedures, as appropriately defined – hemodialysis, peritoneal, continuous renal replacement therapies, ultrafiltration, and Apheresis.
- Assesses patients’ responses to treatment therapy making appropriate adjustments and modifications to the treatment plan as indicated by the appropriately credentialed physician. Communicate problems or concerns to the Inpatient Program Manager, appropriately credentialed physician, patient hospital primary nurse and others as indicated.
- Delivers safe, effective care in a timely an efficient manner.
- Gives organized, concise shift reports for patients on assigned shifts. Apply high level thinking skills to shift patient schedules to meet needs of more critical patients due to labs, MD order, or patient assessment.
- Responsible for the implementation, administration, monitoring, and documentation of patient’s response to prescribed intradialytic transfusions, including appropriate notification of adverse reactions to physician and appropriate blood supplier.
- Collaborates and communicates with physicians and other members of the healthcare team to interpret, adjust, and coordinate daily patient care plan to ensure continuity of care.
- Initiates and communicates to FMS facility nursing staff and appropriate hospital personnel as needed.
- Accurately documents all treatment information in the individual patient record (ACES) and the hospital record, as needed.
- Cleans and disinfects dialysis machine surface, chair, equipment, and surrounding areas between treatments according to inpatient renal services policies and procedures.
- Conducts all tasks necessary for preparation for dialysis treatment and documents where appropriate.
- Performs all required pre-treatment dialysis machine alarm testing.
- If applicable, initiates Solution Delivery System.
- Operates all related equipment appropriately and safely and provides minor trouble shooting when necessary; efficiently utilizes supplies to prevent waste.
- Understands, conducts, and documents appropriately Dialysis/Apheresis machine safety tests/alarm tests, equipment calibration, dialysate testing, machine safety tests, functional testing, and internal and external disinfection on all water & dialysis machines, and complies with the documentation/notification standards per FMS policies.
- Completes and documents ongoing participation in QAI activities.
- Participates in staff meetings as scheduled.
- Participates in staff training and orientation as assigned.
- Acts as a subject matter expert to hospital staff for dialysis related patient/equipment complications.
- Responsible for reporting all new or unusual incidents, information, complaints, or problems to the inpatient manager and other parties per the Adverse Event Report requirements. May be assigned to in-center patient care on an as needed basis
- Review and comply with the Code of Business Conduct and all applicable company policies and procedures, local, state and federal laws and regulations.
- Assist with various projects as assigned by direct supervisor.
- Other duties as assigned.
PHYSICAL DEMANDS AND WORKING CONDITIONS:
- The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Employees are required to take the Ishihara's Color Blindness test as a condition of employment. Note that: Failing the Ishihara Test for Color Blindness does not preclude employment. The Company will consider whether reasonable accommodations can be made.
- Direct patient care, interaction with patients, outpatient clinicians, hospital staff, and physicians. The position requires travel between assigned hospitals and facilities; as well as travel to regional meetings/educational events.
- Position requires on call rotation including night, day, weekend, and holidays.
- There is potential for exposure to potentially infectious material and contagious diseases/material.
- Position provides direct patient care which regularly involves heavy lifting, moving of patient and/or equipment > 200lbs (with assistance); and may lift chemical and water solutions of up to 30lbs up as high as 5 feet.
SUPERVISION:
- Provides supervision and direction of Patient Care Technicians (Certified Clinical Hemodialysis Technicians (CCHT)) and clerical staff; provides direction and education to ICU staff for CRRT.
EDUCATION:
- Current appropriate state licensure.
- Maintains acquired knowledge and remains current in advancements in nephrology, in particular, relative to inpatient care (hospitalized patients requiring varied treatment modalities, not limited to Renal Replacement, Apheresis, and Ultrafiltration services).
- Must meet the practice requirements in the state in which employed.
- Certification in Nephrology Nursing, Apheresis Nursing, or both is highly encouraged.
EXPERIENCE AND REQUIRED SKILLS:
- One year RN experience required and required nursing skills.
- Minimum 6 months nephrology experience required before working independently with no other Dialysis RNs to provide dialysis and ultrafiltration services.
- Minimum 6 months Nephrology experience required before working independently with no other Apheresis RNs to provide Apheresis services.
- Demonstrated strong assessment skills related to the critically ill patient.
- ICU experience preferred but not required.
- Successful completion of training course in the theory and practice of care of the ESRD patient – Progressive Renal Education Preparation.
- BLS CPR Recognition.
- ACLS CPR Recognition preferred, but not required.
- Demonstrates organizational and time management skills, and a competency toward completing continuing and ongoing Renal/Nephrology education.
- Displays leadership skills and ability to direct and supervise others (such as PCTs, CCHTs, clerical staff).
- Successful completion of Nurses Technical Training.
Fresenius Medical Care maintains a drug-free workplace in accordance with applicable federal and state laws.
EOE, disability/veterans
Work Shift
Day (United States of America)
This Role is M-F 830-5pm. ONSITE
Sign on Bonus and Relocation for eligible candidates.
Interview virtually this week!
Required Minimum Experience:
Minimum 2 years of experience in Radiation Therapy, can include residency experience. Required
Graduated and passed boards.
All certifications are required upon hire unless otherwise stated.
MEDPHYS - Medical Physicist ABR within 120 Days
Wellstar Cobb in Austell, Georgia is seeking a FT Radiation Oncology Medical Physicist. The Radiation Oncology Medical Physicist is under the direct supervision of the Chief Physicist, the Physicist ensures the quality of care in the use of radiation producing sources and imaging equipment. The physicist also assists in matters of protection of patients and staff from radiation in the Department of Radiation Oncology. Responsible for overall functioning of radiation therapy equipment, radiation safety considerations and operational aspects of the WellStar Radiation Oncology facilities. Calibrates all radiation therapy equipment, conducts routine quality control procedures on all radiation treatment devices. Helps in planning of radiation treatments. Recommends radiation safety procedures to areas using radiation. Educates personnel in radiation protection practices. Shares responsibility for brachytherapy source inventories, surveys, leak tests.
Core Responsibilities and Essential Functions:
Daily duties
* Work with other physics staff and assist in the general medical physics duties pertaining to operating a radiation therapy facility.
* Ensures that every treatment plan is checked and/or IMRT QA performed before the first fraction.
* Provides quality assurance of patient treatment through weekly checking of patients charts and attending General chart rounds.
* Performs routine or specialized dosimetry to check the treatment plan parameters.
* Performs spot checks and reviews all technical and scientific data generated from simulation through treatment in order to ensure accuracy and precision of patients treatment plan.
* Designs and fabricates special ancillary equipment, immobilization devices, compensating filters, molds and blocking devices.
* Performs chart checks for any mathematical errors or prescription changes that may have occurred throughout the course of treatment.
* Provides consultation to assure accurate radiation dose delivery.
* Verifies proper operation and safety of all machines and sources producing radiation in accordance with established guidelines and protocols.
* Upholds, maintains and establishes adequate protocols to ensure accurate patient dosimetry.
* Follows all radiation safety standards and regulatory requirements. Maintain safe environment for patients, personnel and visitors.
* Ensures proper documentation is recorded and maintained.
* Participates in all ongoing protocol studies with respect to gathering correct data and documentation of materials.
* Assists RSO with the Radiation Safety Program
* Assures the efficient operation of workflow of the department by performing other duties as assigned by the Radiation Oncology Manager.
QA
* Performs routine checks on the radiation therapy equipment in accordance with the guidelines provided by AAPM.
* Performs VMAT/IMRT QA on all IMRT/VMAT plans.
* Performs daily, weekly, monthly and quarterly checks on all radiation delivery machines.
* Assists the Chief Physicist during Annual machine QAs.
* Performs machine QA after a component changes.
* Works with the field service engineer to ensure that the machine is in compliance after service events.
Staff training and education
* Educates staff and physicians on radiation safety procedures.
* Educates personnel on care for brachytherapy patients.
* Keeps up with continuing education credits required to maintain the certification.
Performs other duties as assigned
Complies with all Wellstar Health System policies, standards of work, and code of conduct.
Required Minimum Education:
Master's Degree
Ph.D Degree required with at least five years of direct experience in the field.
Required Minimum License(s) and Certification(s):
All certifications are required upon hire unless otherwise stated.
MEDPHYS - Medical Physicist ABR within 120 Days
Additional License(s) and Certification(s):
Required Minimum Experience:
Minimum 2 years of experience in Radiation Therapy, can include residency experience. Required
Required Minimum Skills:
Must be familiar with a variety of the fields concepts, practices, and procedures and be able to rely on extensive experience and judgement to plan and accomplish goals.
A wide degree of creativity and latitude is expected.
Must have ability to be self-motivated and self-directed in daily/routine tasks.
The individual must be able to communicate and understand the verbal and written English language and display a positive attitude (see WellStar Standards of Gold).
Join us and discover the support to do more meaningful work—and enjoy a more rewarding life. Connect with the most integrated health system in Georgia, and start a future that gives you more.
Remote working/work at home options are available for this role.
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician
- Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State.As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount.
You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications.
Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications.Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems.Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions.Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages.Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy.Comply with all Federal, State, and Company regulations while performing duties.Collaborate with other crafts to assist in troubleshooting outside the central control system as needed.Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency.Communicate relevant information to succeeding shifts using management-approved methods.Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems.Maintain equipment records, logs, and updates, preparing reports and schedules as required.Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion.Ensure system configurations comply with FAA and accreditation requirements.Possess working knowledge of software programming languages (e.g., Boolean, ladder, C+, C++) and numbering systems (binary, octal, hexadecimal).Understand electronic theory, computer and networking architecture, microprocessors, and discrete components.Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems.Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design.Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes.Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required.Perform tasks associated with other job classifications when necessary to complete assignments.Obtain and maintain applicable licenses, certificates, and certifications.Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems.Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.
F.
R.
§ 120.62 is required.
"US Person" includes US Citizen, lawful permanent resident, refugee, or asyleeResumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).Basic Qualifications : 3+ years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance.
1+ years' experience troubleshooting programmable logic controllers (PLC) OR Functionally Equivalent Control Systems, such as related fields including military, shipboard, aircraft support, weapons systems, or industrial automation platforms.Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training.Preferred Qualifications:Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment.Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.Experience working around 3 phase, industrial voltages 480v, 277v, 208v.Ability to work around electromagnetic fields as a result of various types of production equipment.Conflict of Interest: Successful candidates for this position must successfully complete the Company's Conflict of Interest (COI) assessment process.Typical Education & Experience:High school graduate or GED preferred.Relocation: This position offers relocation based on candidate eligibility.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement : This position is for a variety of shifts .
Working in other shifts and/or overtime varies based on business needs.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay : $47.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Mar.
30, 2026Language RequirementsEnglish PreferredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Become part of an inclusive organization with over 40,000 teammates, whose mission is to improve the health and well-being of the unique communities we serve.
Summary: Employs radiologic sciences technology to perform a variety of patient care, technical, and diagnostic tasks targeted to the care of patients with cardiovascular disease.
Major tasks include ultrasound imaging, patient preparation and post procedure care, procedure room set-up and cleaning, technical reporting, and quality monitoring.
Responsibilities: 1.
Demonstrates competence in delivering pre-procedure and post-procedure patient care including, but not limited to patient assessment pre- and post-procedure care and, emergency cardiac care (CPR is required).
Additionally, assistance with post-procedure transport may be required.
2.
Ensures equipment is calibrated and properly maintained on a daily basis.
Performs and records all equipment maintenance and quality assurance monitoring.
Troubleshoots and identifies any equipment problems and reports to appropriate supervisor or biomedical engineering.
3.
Generates ultrasound images of the heart and/or vascular related structures.
Performs advanced cardiac ultrasound studies in care of patients with complex conditions and regularly performs multiple study types with varied anatomical areas.
4.
Performs vascular studies and real time readings/reports in the operating room for invasive and non-invasive vascular procedures.
5.
Performs studies for inpatient neonatal/NICU and pediatric patients.
6.
May perform staff training and education.
Serves as a subject matter expert and resource to Cardiovascular Sonographers.
7.
Monitors and records patient information and maintains report storage and data systems.
Compiles and enters data necessary for charge entry and prepares reports.
Also responsible for retrieval of stored information and reports from the automated storage system.
8.
Prepares procedure room and equipment for daily use and is responsible for timely and efficient room preparation between procedures.
9.
Independently responds to on-call needs for emergent procedures.
Other Information Other information: Education Requirements: ● Associate's degree in Sonography, Radiology or a related field within 3 months of hire, OR Completion of a twelve (12) month ultrasound program within 3 months of hire.
Licensure/Certification Requirements: ● Registered by the American Registry of Diagnostic Medical Sonographers (ARDMS), Cardiovascular Credentialing International (CCI), or registry eligible and become registered within one (1) year from date of hire.
Must maintain registry status and continuing education requirements annually.
Professional Experience Requirements: ● One year minimum experience in acute hospital setting.
Knowledge/Skills/and Abilities Requirements: ● Specific competencies required by entity.
Job Details Legal Employer: NCHEALTH Entity: UNC Rockingham Health Care Organization Unit: RHC Cardiovasc Svcs Work Type: Part Time Standard Hours Per Week: 24.00 Salary Range: $38.55
- $55.43 per hour (Hiring Range) Pay offers are determined by experience and internal equity Work Assignment Type: Onsite Work Schedule: Day Job Location of Job: US:NC:Eden Exempt From Overtime: Exempt: No This position is employed by NC Health (Rex Healthcare, Inc., d/b/a NC Health), a private, fully-owned subsidiary of UNC Heath Care System.
This is not a State employed position.
Qualified applicants will be considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, status as a protected veteran or political affiliation.
UNC Health makes reasonable accommodations for applicants' and employees' religious practices and beliefs, as well as applicants and employees with disabilities.
All interested applicants are invited to apply for career opportunities.
Please email if you need a reasonable accommodation to search and/or to apply for a career opportunity.
d24ad0b8-823f-4e68-a892-2986ccdf7392
The Middlesex Corporation is a nationally recognized and award-winning leader in the heavy civil construction industry. Since 1972, the family business founded by Robert W. Pereira has developed an extensive client and project list through its consistent efforts to safely build America's infrastructure. The Middlesex Corporation specializes in building and reconstructing highways, bridges, marine, rail, and transit facilities through its collaborative team approach and focus on core values. In addition, Middlesex Asphalt in Central Florida is one of the largest and most productive asphalt plants in the United States with Middlesex Paving earning an equally solid regional presence and reputation.
Position Summary:
The Surveyor is responsible for all field layout and as-builts on assigned projects. Work conditions include walking long distances while carrying up to 40 pounds of equipment and working in all weather conditions for 8-10 hours a day.
Responsibilities:
- Operate all types of survey equipment including GPS and SCS900 software, Total Station, and Level.
- Perform site setup activities; i.e. site calibration, level runs, control checks.
- Perform all layout calculations in data collector; i.e. Station/Offset, Distances, Grading.
- Keep detailed field notes.
- Work independently when performing field layout.
- Transfer files between field and office.
- Work directly with the Project Managers and Superintendents regarding initial project layout requirements, means and methods of establishing project survey control, and field reporting.
- Utilize Trimble survey equipment and software including GPS, Robotic Total Stations, and manage Machine Control equipment
- Software used includes SCS900, Trimble Access, and Trimble Business Center.
Qualifications:
- High school diploma or equivalent required, construction related college degree preferred.
- 7- 10 years of construction related experience required
- Valid Driver's License.
- Knowledge of survey grade GPS and SCS900 software as well as other survey equipment.
- Basic CAD skills; i.e. Business Center, Carlson, Civil 3D, MicroStation, Open Roads.
Necessary Attributes:
- Must possess the ability to adapt to different personalities and management styles.
- Team player and with excellent interpersonal skills.
- Ability to interface with field management teams.
- Self-starter with exceptional verbal and written communication skills.
- Reliance on experience and judgment to plan and accomplish goals.
- Dedicated and hard working.
- Strong negotiating skills.
- Excellent organizational skills.
We offer our full-time and eligible part time team members a comprehensive benefits package that's among the best in our industry. Benefits include medical, dental and vision plans covering eligible team members and dependents, employee assistance programs, life insurance, disability, top-tier 401k with matching, tuition reimbursement, industry leading referral program, and generous paid time off.
ABOUT WILLIAMSON HEALTH | Williamson Health is a regional healthcare system based in Williamson County, Tennessee, with more than 2,300 employees across more than 30 locations and more than 860 physicians and advanced care practitioners offering exceptional healthcare across 60-plus specialties and subspecialties close to home. The flagship facility, Williamson Medical Center, which recently opened its new Boyer-Bryan West Tower, offers extensive women's services, state-of-the-art cardiology services, advanced surgical technologies, an award-winning obstetrics and NICU, leading-edge orthopaedics, outpatient imaging services, and distinct comprehensive emergency and inpatient services for both adult and pediatric patients. Other Williamson Health service providers include the Bone and Joint Institute of Tennessee, The Turner-Dugas Breast Health Center, Monroe Carell Jr. Children's Hospital Vanderbilt at Williamson Medical Center, Williamson Health physician practices that are strategically located throughout the community, countywide Emergency Medical Services that include 18 rapid response units, Williamson Health Foundation, and multiple joint venture Vanderbilt Health and Williamson Medical Center Walk-In Clinics in Williamson County. Learn more about our many specialized services at .
Williamson Health is a system where your talents will be valued and your skillset expanded. We are rooted in our promise to world-class, compassionate care for the residents of Williamson County and surrounding communities, taking exceptional pride in serving our community. We're committed to empowering our employees to work in innovative ways and reserve time and space for curiosity, laughter and creativity. We value and support the diversity and cultural differences among one another and are committed to upholding an inclusive environment that appreciates the uniqueness of all individuals. Our values are at the heart of everything we do: respect for every individual, the health and total well-being of all people, human compassion and integrity. These shape who we are as an organization and are essential for delivering the highest level of culturally competent care and treatment of every patient, family member, visitor, physician and employee.
Williamson Health is pleased to offer a comprehensive benefits program, that offers you choice and flexibility, so you can take charge of your physical, financial, and emotional well-being.
o Medical, Dental, Vision
o PTO
o Retirement Matching
o Tuition reimbursement
o Discount programs
o FSA (Flexible Spending Accounts)
o Identity Theft Protection
o Legal Aid
Williamson Health is an equal-opportunity employer and a drug-free workplace.
POSITION SUMMARY
A Medical Technologist is responsible for conducting laboratory tests which provide information to physicians for the diagnosis, prevention or treatment of diseases in patients.
Essential Functions:
• Promotes the mission, vision, and values of the organization. Exhibits and adheres to WMC's Standards of Performance in all areas of job duties and responsibilities.
• Participates in hospital initiatives and in departmental goals set by the Laboratory Director and staff.
• Interacts professionally with laboratory management, laboratory personnel, physicians, hospital personnel, patients and customers to provide optimal patient care.
• Works well with other laboratory employees to maintain an environment of teamwork.
• Exercises all laboratory safety precautions and adheres OSHA and TOSHA safety regulations
• Positively identifies patients, labels specimens and enters results using two unique identifiers. Maintains working knowledge of laboratory policies and procedures.
• Maintains current knowledge and adheres to hospital policies and state, federal and other regulatory requirements
• Responds appropriately to tests with a priority of STAT, call results or timed specimens
• Responsible for training new employees and students as assigned.
• Performs high-complexity testing
• Notifies nursing and/or physician of critical lab values with complete documentation on report
• Responsible for instrument calibrations, maintenance and troubleshooting problems.
• Performs quality control as outlined by departmental procedures.
• Reviews pending and outstanding reports and resolves outstanding specimens
• Other duties as needed/assigned.
POSITION REQUIREMENTS
Formal Education / Training:
• BS degree in Medical Technology, Medical Laboratory Science or equivalent
• Valid State of Tennessee Medical Technologist license
Workplace Experience:
• Laboratory experience preferred
• Meditech experience preferred
Knowledge, Skills and Abilities:
• Knowledge of medical laboratory science
• Strong organizational skills and interpersonal skills
• Ability to determine appropriate course of action in more complex situations
• Ability to work independently, be attentive to detail and maintain a positive attitude
• Ability to manage multiple and simultaneous responsibilities and to prioritize scheduling of work
• Ability to maintain confidentiality of all medical, financial and legal information
• Ability to complete work assignments accurately and in a timely manner
• Ability to handle difficult situations involving patients, physicians, or others in a professional manner
• Strong computer skills
Physical Environment:
• Exposure to blood and body fluids, infectious and contagious diseases, chemicals.
• Ability to communicate in English verbally and in writing.
• Ability to perform multi-functional tasks.
• Ability to read computer screen, distinguish color, hear phone and conduct interpersonal communications
• Ability to learn, reason and perform mathematical calculations related to job.
• Ability to use critical thinking skills.
• Requires light to moderate work with 40 pounds maximum weight to lift and carry.
• Manual dexterity and mobility in both hands; exposed to repetitive motion.
• Frequent reaching, bending, stooping, kneeling, and crouching.
• Requires prolonged standing and walking
• Flexibility to shift schedule, work extra hours or overtime as needed by staffing deficits or high patient volumes
PERFORMANCE STANDARDS
Works well with Management:
• Communicates potential issues in a timely manner
• Follows through on work assignments
• Communicates opportunities for improvement in a positive way
• Accepts reassignments as needed
Participates in departmental meetings and process improvement teams (laboratory or hospital, if applicable).
• In-services reviewed and signed before due date
Motivated - takes initiative for work that needs to be done
• Helps section head with instrument correlations/quality control range establishment
• Performs maintenance without being asked or as assigned
• Follows through with incomplete report and documents on lead tech board without reminder
• Seeks out new tasks when work in area is done/caught up
• Floats to needed areas
Positively identifies patients and specimens
Corrected reports that could affect outcome of patient kept to a minimum
Technical errors kept to a minimum (procedure not followed correctly - may affect patient care)
Follows laboratory policies and procedures regarding:
• Testing
• Quality Control
• Instrument maintenance and troubleshooting
Turn Around Time within acceptable time criteria for ER patients. Average time from Collected to Resulted:
• • 20 - 30 minutes
• >30 minutes
Follows Hospital and Laboratory Policies on the use of Electronic Devices:
• Cell phones kept on vibrate
• Phones/Electronic/Headphones devices used during break/meal times only
• Does not use personal phones in patient care areas
• Uses the hospital internet for work purposes only
Adheres to WMC Lab Attendance policy
• Tardies/Absences kept to a minimum
• Rarely misses time punches in API
• Submits requests for PTO within policy guidelines
• Does not take extended lunches
• Takes appropriate breaks as dictated by workload
Turns out accurate laboratory results
• Checks specimen integrity
• Uses critical thinking skills when reporting results
• Troubleshoots problems related to laboratory values
Provides effective communication
• Communicates problems/issues/concerns to lead tech
• Communicates problems/issues/concerns at shift change to co-worker
• Communicates testing delays to appropriate personnel
• Reads e-mail and communication logs during each work day.
The Electrical Instrument Technician maintains, constructs and repairs electrical distribution, lighting, computer and PLC systems within the plant, as well as assembles, installs, tests and maintains electrical or electronic wiring, equipment, appliances, apparatus and fixtures. They will also diagnose malfunctioning systems using test equipment and hand tools to locate the cause of a breakdown and correct the problem.
This position is for night shift Wednesday thru Saturday. 4pm-4am
BenefitsAt CalPortland, we’re proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees. Your benefits are an important part of your overall compensation at CalPortland. That’s why we give you a wide range of benefits to choose from. All regular full time employees may enroll in a variety of health and welfare plans including medical, dental and vision plans. Other benefits include life insurance, disability coverage, employee assistance program, and retirement program. The company also has a variety of voluntary benefits for employees to choose from.
Compensation$39.38 to $40.30 + shift differential
Responsibilities- Calibrates, designs, reconfigures, assembles, installs, inspects and maintains electrical systems and equipment, such as motors, generators, commutators, speed reducers, switchboards, circuit boards, lighting circuits, SCR, electronic control devices, computers and circuits, etc.; uses blueprints and related resources to complete tasks and checks/verifies work to ensure proper operation
- Uses necessary instruments and tools such as voltmeters, ammeters, V.T.V.M’s, bridges, computers, laptops and any other industrial electrical/electronic analyzing equipment and tools needed in carrying out responsibilities
- Sets up and uses rigging to handle tools and equipment, such as manlifts and cranes; climbs poles or uses mobile equipment to run, repair, modify, remove, clean, etc., power lines and all associated equipment
- Designs, prepares, modifies and maintains logs, reports, charts, schematics, prints and any other paperwork incidental to duties
- Maintains equipment, work areas, measuring instruments and tools
- Performs minor mechanical work such as removing covers, lids or obstructions prior to electrical repair work; performs cutting and welding; paints electrical/electronic panel, switchgear, motor windings, insulating equipment, control station, etc.
- Changes motors and performs alignments
- Maintains process analyzers
- Performs other duties as assigned by manager
High school diploma/GED
Requirements/Qualifications- Physical requirements: sit, stand, stoop, bend for extended periods of time (up to 8 hrs.), climb, and lift up to 70 lbs.
- Walk on all types of surfaces (uneven and/or slippery ground)
- Ability to work in surroundings that include dust, vibration, heights and confined spaces
- Must work in all weather conditions: heat, cold, wet, dry and/or dusty conditions and near hot kiln process
- Exposure to cement, clay, limestone and various chemicals. See MSDS for more details
- Able to work rotating and flexible hours
- Able to work effectively both independently and as part of a team
- Good verbal and written communication skills
- Experience with or knowledge of all types of equipment used in the manufacturing of cement preferred
Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.
#LI-PW1
Fort Lauderdale, FL – Seeking Medical Assistant with Limited License X-Ray
Join our team as a Medical Assistant with Limited License X-Ray at MOOV Health & Wellness, where we are focused on outpacing aging through a physician-guided, personalized approach to wellness. In this role, you will provide each patient with an excellent experience while taking responsibility for all aspects of the radiology functions, such as monitoring maintenance, performance and quality of x-ray machines and training new Medical Assistants with Limited License X-Ray certifications. If you’re passionate about wellness and want to make a meaningful impact on people’s lives, we’d love for you to join our team.
The Opportunity
- Triage, vital and room patients.
- Record patient interview, history, and chief complaint into the Electronic Medical Record.
- Facilitate patient flow and ensure efficiency in the back office.
- Prepare patients for Physician/Advance Provider evaluation.
- Assistant Physician/Advanced Provider in evaluation and treatment of the patient.
- Administer medication/injections under the supervision of the Physician or Advanced Provider.
- Perform ordered procedures (Electrocardiogram (EKG), injections, tray set-ups, assist Physician/Advanced Provider as needed)
- Change dressings, apply bandages, and perform other first aid procedures.
- Provides accurate, legal, and ethical documentation always.
- Maintains safe, secure, and healthy work environment by establishing and following standards and procedures.
- Have knowledge of ICD-10 and CPT coding of nurse procedures.
- Monitor inventory for expiration and ordering of supplies.
- Keeps equipment operation by following manufacturer’s operating instructions and notifying clinic manager of any equipment malfunction.
- Responsible for cleaning rooms after each patient in a timely manner.
- Autoclave equipment each night.
- Assist in answering phones and taking accurate messages, as needed.
- Perform patient call-backs, as requested by physician/Advanced Provider.
- Runs all lab procedures assigned (strep, urine, drug screens).
- Execute Radiology tests per certification.
- Oversee the production of x-rays.
- Maintain accurate record of all x-ray films to include appropriate log entries, x-ray documentation for jackets, and accurate filing of films.
- Follow up on physician/radiologist interpretations of films daily.
- Maintain effective and efficient inventory of x-ray administrative and clinical supplies.
- Ensure calibration and maintenance of all x-ray equipment.
- Update x-ray control panel techniques as needed.
- Ensure coordination of normal startup and shut down procedures of the x-ray department.
- Follow all regulations for protecting patients, coworkers, and themselves from unnecessary exposure.
- Prepare appropriate and accurate documentation.
Required Experience and Competencies
- High school diploma or equivalent required.
- Two [2] years healthcare experience preferred, preferably in an urgent care/primary care setting
- Medical Assistant Certification required.
- CRT Certification required, with American Registry of Radiologic Technologists (AART).
- CPR certificate required.
- BLS certificate required.
- Familiar with charting in an electronic health record.
- Knowledge of clinical compliance.
- Solid understanding of medical insurance plans and office procedures.
- Sets and maintains high performance standards.
- Maintains a high level of productivity and self-direction.
- Excellent verbal and written communication skills.
- Team oriented with a productivity-driven demeanor.
- Ability to communicate clearly and professionally (verbally and in writing).
- Excellent customer service skills.
- Maintains confidentiality and adheres to site HIPAA policies.
- Adheres to organizational policies and procedures.
- Pays close attention to detail, accuracy and completeness.
- Completes work in a timely and consistent manner.
- Able to effectively deal with change and diverse people.
The Practice
MOOV Health and Wellness
At MOOV, we believe that aging doesn’t have to mean slowing down. Our focus is helping individuals outpace aging by embracing a proactive approach to their health. Through a personal, pioneering, and physician-led approach, we offer solutions that promote physical, mental and emotional well-being, unlocking each member’s full potential.
The Community
- Fort Lauderdale, Florida, is a coastal gem celebrated for its stunning beaches, vibrant culture, and endless sunshine.
- Located in South Florida along the Atlantic Coast, it offers a perfect blend of relaxed coastal living and big-city amenities.
- Residents enjoy boating along the city’s scenic canals—earning it the nickname “Venice of America”—as well as dining and shopping on Las Olas Boulevard.
- Nearby landmarks include the Bonnet House Museum & Gardens, Hugh Taylor Birch State Park, and the lively Riverwalk Arts & Entertainment District.
- Just a short drive away, you’ll find Miami’s dynamic nightlife and Palm Beach’s upscale charm.
- The weather stays warm year-round, making it ideal for outdoor living and beach days in every season.
- Sports fans can easily cheer on Florida’s major league teams, including the NFL Miami Dolphins, NBA Miami Heat, and NHL Florida Panthers.
- All this and more make Fort Lauderdale the perfect place to live and work.
Benefits & Beyond*
MOOV cares about the whole you. With our comprehensive compensation and benefits package, we are mindful of what matters most support your needs of today and your plans for the future.
- Superior health plan options.
- Medical, dental, vision, HSA/FSA, life coverage, and more.
- 401(k) retirement savings plans.
- Generous paid time off.
- Voluntary benefits and family planning support.
- Professional and career development programs.
- Employee Assistance Program (EAP).
- Wellness program.
- Commuter benefits.
- Student loan refinancing discounts.
*Benefits for part-time and per diem vary. Please speak to a recruiter for more information.
MOOV does not discriminate against any person on the basis of race, creed, color, religion, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information (including family medical history), veteran status, marital status, pregnancy or related condition, or any other basis protected by law. MOOV is committed to complying with all applicable national, state and local laws pertaining to nondiscrimination and equal opportunity.
Applicants only. No agencies please.
- $75/hr Shift Timings: VARIED Duties: 1.
Requires the utilization of appropriate kV and mA techniques to insure quality diagnostic CT images.
2.
Performs daily quality control calibration checks on all equipment in order to ensure the equipment is calibrated and working properly before any patient study is performed.
3.
Injects patients with radioactive material as per the physicians order following the prescribed protocol.
4.
Observes all department documentation policies by filling in all appropriate logs, manuals, charge documents, as well as, reporting equipment problems in order to comply with regulatory agencies.
5.
Performs quality control, quality assurance and safety tests.
Follow radiation safety guidelines to comply with ALARA principle.
6.
Maintains and develops and retrieves patient films and electronic date for Radiologist interpretation.
7.
Orders patient-specific radiopharmaceutical doses 1-day prior to use.
8.
Receives radiopharmaceutical on day of delivery and verifies proper receipt as per policy and procedure.
Verifies activity level of the does prior to administration.
Skills: Performs CT procedures according to the prescribed protocols in order to ensure uniformity and accuracy.
Exercises appropriate judgment to assess and respond to patients needs prior to, during and after visits in the Radiology department.
Education: Requirements include licensing with NYS DOH in Radiologic Technologist, ARRT certification in Radiography and CT, and BLS certification.
At least 1 year of CT experience; Graduate of Radiologic Technolgist Required: New York State License (L.R.T), American Registry of Radiologic Technologists (ARRT and current CT certiciation)
