Cable Remote Codes Jobs in Usa
97 positions found — Page 9
I
Technology Physical Layer Engineer/Project Manager
🏢 ICONMA
Salary not disclosed
Our Client, a Banking company, is looking for a Technology Physical Layer Engineer/Project Manager for their Brooklyn, OH location.
Responsibilities: Candidates for this position will be responsible for the design, engineering and installation of structured cabling systems based on industry and Client standards.
They will work with Client Corporate Real Estate, Client Network Engineering, outside architecture and engineering firms, cabling contractors and electrical contractors in a design-build construction environment.
This person will help define and implement cabling standards, prepare technical specifications and bid documents, identify and select qualified vendors and contractors and will provide technical support and project management from project start to finish.
They will also be responsible for day-to-day management and execution of non-project physical layer activity at Client sites.
The candidate must be able to manage multiple projects and activities at the same time and must be able to read and understand technical drawings, floor plans and network diagrams.
They must be able to work independently, interact with a variety people and levels within the company, travel to project sites as needed and identify risks and solve problems.
Client structured cabling systems are based on the American National Standards Institute (ANSI) and the Electronics Industry Association/Telecommunications Industry Association (EIA/TIA) standards.
Client has also standardized on the use of the Siemon Cabling System and all contractors must be Siemon Certified Installers.
Requirements: Qualified candidates must have at minimum of 5 to 10 years of experience with design and installation of structured cabling systems using the following cable types and supporting the following platforms and standards: ANSI/EIA/TIA 568 – Telecommunications Cabling ANSI/EIA/TIA 569 – Pathways and Spaces NEC – National Electric Code IEEE 802.3 – Ethernet IEEE 802.11
- WiFi Cat 6 Copper Cable Cat 6A Copper Cable Cat 5e Copper Cable Multimode Fiber Optic Cable Single Mode Fiber Optic cable RG6 Coax Cable RG11 Coax Cable Local Area Networking (LAN)
- Wired Local Area Networking (WLAN) – Wireless Voice over Internet Protocol (VoIP) AV/CATV/Video Analog Voice – POTS/Fax Client requires our low voltage contractors to be Siemon Certified.
The person we are looking for doesn't have to be certified.
Why Should You Apply? Health Benefits Referral Program Excellent growth and advancement opportunities As an equal opportunity employer, ICONMA provides an employment environment that supports and encourages the abilities of all persons without regard to race, color, religion, gender, sexual orientation, gender identity or express, ethnicity, national origin, age, disability status, political affiliation, genetics, marital status, protected veteran status, or any other characteristic protected by federal, state, or local laws.
Responsibilities: Candidates for this position will be responsible for the design, engineering and installation of structured cabling systems based on industry and Client standards.
They will work with Client Corporate Real Estate, Client Network Engineering, outside architecture and engineering firms, cabling contractors and electrical contractors in a design-build construction environment.
This person will help define and implement cabling standards, prepare technical specifications and bid documents, identify and select qualified vendors and contractors and will provide technical support and project management from project start to finish.
They will also be responsible for day-to-day management and execution of non-project physical layer activity at Client sites.
The candidate must be able to manage multiple projects and activities at the same time and must be able to read and understand technical drawings, floor plans and network diagrams.
They must be able to work independently, interact with a variety people and levels within the company, travel to project sites as needed and identify risks and solve problems.
Client structured cabling systems are based on the American National Standards Institute (ANSI) and the Electronics Industry Association/Telecommunications Industry Association (EIA/TIA) standards.
Client has also standardized on the use of the Siemon Cabling System and all contractors must be Siemon Certified Installers.
Requirements: Qualified candidates must have at minimum of 5 to 10 years of experience with design and installation of structured cabling systems using the following cable types and supporting the following platforms and standards: ANSI/EIA/TIA 568 – Telecommunications Cabling ANSI/EIA/TIA 569 – Pathways and Spaces NEC – National Electric Code IEEE 802.3 – Ethernet IEEE 802.11
- WiFi Cat 6 Copper Cable Cat 6A Copper Cable Cat 5e Copper Cable Multimode Fiber Optic Cable Single Mode Fiber Optic cable RG6 Coax Cable RG11 Coax Cable Local Area Networking (LAN)
- Wired Local Area Networking (WLAN) – Wireless Voice over Internet Protocol (VoIP) AV/CATV/Video Analog Voice – POTS/Fax Client requires our low voltage contractors to be Siemon Certified.
The person we are looking for doesn't have to be certified.
Why Should You Apply? Health Benefits Referral Program Excellent growth and advancement opportunities As an equal opportunity employer, ICONMA provides an employment environment that supports and encourages the abilities of all persons without regard to race, color, religion, gender, sexual orientation, gender identity or express, ethnicity, national origin, age, disability status, political affiliation, genetics, marital status, protected veteran status, or any other characteristic protected by federal, state, or local laws.
Not Specified
R
Mobile Diesel Mechanic
$32.74 per hour
Position Description
Ryder is hiring a Mobile Maintenance Diesel Technician in Roseville, Michigan — offering weekly pay, excellent benefits, and a Technician career you can feel good about.
Call “Michelle” or text “Roseville” to 9
Hear it from a Ryder Technician Employee Here:
- Mobile Technicians are issued a Ryder Mobile Maintenance Truck for Service Calls
- Hourly Pay: $32.74 per hour
- Certification Bonus of $100 for each New ASE Certification Obtained up to $700
- Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
- Sign On Bonus: Ryder Pays You $750 at 30 days and $750 at 90 days
- Schedule: Monday–Friday Weekends OFF
- Hours: Second Shift 3:00 pm – 11:30 pm
We want the right Mobile Maintenance Mechanic to join us at Ryder to work on Heavy Duty Vehicles
Apply Here with Ryder Today
Spots are filling fast — click apply now to secure your spot.
Questions? Call “Michelle” or text “Roseville” to 9 to speak with your recruiter today.
All the benefits you expect — without the wait.
- Medical, Dental, Vision after 30 days
- 80 hours PTO your first year, starting Day 1
- Yearly merit pay increases
- 401 (k) company match
- PPE, uniforms, and boot allowance
- Build your skills - paid training
- Safety‑first workplace & State-of-the-art equipment
- Top Tech Competition: Earn $250 – $50,000 per year
- U.S. military veterans - extra paid day off
- 15% company stock discount
- Up to $5,000 in Tech tuition repayment
- 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
- Employee discounts on tools, vehicles, travel, tech & more
Click Here to See All Ryder Careers:
We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday
Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!
EEO/AA/Female/Minority/Disabled/Veteran
Requirements
- High School diploma or equivalent
- Vocational or Technical Certification in vehicle maintenance and repair services preferred
- Must have or meet federal PM certification requirements through any combination of classroom training or work experience totaling 1 year
- One (1) year or more mechanical experience working offsite at customer locations preferred
- Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
- Pass a Ryder drug test and previous employer's for the past 3 years, DOT physical, Ryder road test, pass a Ryder Background check and Motor vehicle check including Drug and Alcohol verification from previous employers for the last 3 years
- Able to take home assigned mobile service truck as applicable and secure vehicle and contents preferred
- Must be able to drive Ryder vehicles
- Ability to understand and adhere to Company policies in all areas
- Proven hands-on mechanic, customer service, and account management skills
- Ability to complete repair orders with the Company established systems
- Demonstrates customer service skills. Strong relationship management skills
- Strong verbal and written communication skills
- Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
- Ability to work independently and as a member of a team. Ability to prioritize workload
- Flexibility to operate and self-driven to excel in a fast-paced environment. Self-starter and self-sufficient approach
- Capable of multi-tasking, highly organized, with excellent time management skills
- Detailed oriented with excellent follow-up practices
- Entrepreneurial spirit
- Valid NonCommercial Driver License CLASS E, Commercial Driver License (CDL) CLASS A and/or State driver's license as required
- Preventive Maintenance (PM230&PM298) within 90 Days
- Other Brakes-Air (BA220&BA298) within 90 Days
- Other Brake mechanics/inspectors FMCS 396.25
- Other Hydraulic Brake (BH220&BH298) where appropriate within 90 Days
- Other Tire & Wheel TW220 within 90 Days
- Other CF609 & A/C trained and qualified (AC220&AC298) within 180 Days
- Other Battery Charge and Check, Warranty
- Other HD electrical - DR208 within 90 Days
- Other Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days
- Other OEM on-line engine courses (minimum 2)
- DOT Safety Regulated Position
- Safety Sensitive Position
Regulated Tech:
- Must be able to obtain CDL within 6 months after hire
- Pass a Ryder Drug Test
- Pass a DOT physical
- Pass a Ryder road test
- Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.
Responsibilities
- Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction. Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
- A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform basic system checks such as power to compressor, visual inspection of condenser, belt tension, etc…; Identify Freon and oil leaks
- Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
- Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
- Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
- Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
- Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
- Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
- Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
- Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
- Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
- Driveline: Lubricate drive line; Inspect components for wear or damage
- Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
- Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc... for proper integrity and condition
- Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
- Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
- Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc.
- Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
- Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
- Utilize key functions of Shop Management System and electronic documentation available. - Perform work in accordance with all federal/ provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
- Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements
- Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer
- Performs other duties as assigned
Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.
Posted Date 1 month ago (2/19/2026 10:21 AM)
Requisition ID 2
Location (Posting Location) : State/Province MI
Location (Posting Location) : City ROSEVILLE
Location (Posting Location) : Postal Code 48066
Category Technicians/Service Employees8
Employment Type Regular-Full time
Travel Requirements 0-10%
Position Code 1000740
Min Pay USD $32.74/Hr.
Max Pay USD $32.74/Hr.
permanent
J
Senior Electrical Engineer
🏢 Jobot
Salary not disclosed
Senior Electrical Engineer Needed for Innovative and Fast Growing Technology Company!! This Jobot Job is hosted by: Bryce Koelsch Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $100,000
- $150,000 per year A bit about us: We are a fast growing and innovative fusion-based technology company that is paving the way for commercialized fusion across multiple applications.
We currently employ some of the best and brightest in the space and are looking to continue scaling our operations.
We are currently on the search for a Senior Electrical Engineer to join our team with a proven background in the design of power distribution systems! In this position you will be responsible for the following: Lead design of conduits, cable trays, cable selection, terminal/connection drawings, panels and panel design Responsible for the specifications, calculations, drawings, and test plans to support the design, new construction, testing, commissioning and in-field troubleshooting Why join us? As a Senior Electrical Engineer in our company we are able to offer the following: A competitive base salary depending on experience! Medical, Dental and Vision Insurance! Generous PTO program along with paid holidays! 401k with company match! Flexible hybrid / remote schedule! Job Details As a Senior Electrical Engineer on our team, we are looking for the following experience: Bachelor's degree in electrical engineering 5+ years of experience in designing low-voltage power distribution systems Expertise working with conduits, cable trays, cable selection, terminal/connection drawings, panels, and panel design Working knowledge of the NEC, Life Safety Code, Building Codes, IEEE standards and IEC standards Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $100,000
- $150,000 per year A bit about us: We are a fast growing and innovative fusion-based technology company that is paving the way for commercialized fusion across multiple applications.
We currently employ some of the best and brightest in the space and are looking to continue scaling our operations.
We are currently on the search for a Senior Electrical Engineer to join our team with a proven background in the design of power distribution systems! In this position you will be responsible for the following: Lead design of conduits, cable trays, cable selection, terminal/connection drawings, panels and panel design Responsible for the specifications, calculations, drawings, and test plans to support the design, new construction, testing, commissioning and in-field troubleshooting Why join us? As a Senior Electrical Engineer in our company we are able to offer the following: A competitive base salary depending on experience! Medical, Dental and Vision Insurance! Generous PTO program along with paid holidays! 401k with company match! Flexible hybrid / remote schedule! Job Details As a Senior Electrical Engineer on our team, we are looking for the following experience: Bachelor's degree in electrical engineering 5+ years of experience in designing low-voltage power distribution systems Expertise working with conduits, cable trays, cable selection, terminal/connection drawings, panels, and panel design Working knowledge of the NEC, Life Safety Code, Building Codes, IEEE standards and IEC standards Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Network Infrastructure Technician Level 1
🏢 Jobot
Salary not disclosed
Wanted: Network Infrastructure Technician Level 1 This Jobot Job is hosted by: Stephen Niedringhaus Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $27
- $27 per hour A bit about us: Wanted: On-site Network Infrastructure Technician Level 1.
Network Infrastructure Technician I Are you looking for a great long-term career with growth opportunities? Join a 24/7/365, mission-critical environment supporting world-class data center connectivity.
As a Network Infrastructure Technician 1, you’ll install and maintain physical network media and provide “remote hands” support that keeps customers online and delighted.
Don't wait.
Interviews are going on now.
Apply today! Why join us? We offer several comprehensive benefit plans, and we cover 100% of Medical and Dental Insurance for you and your family! Other Benefits Include: Vision Insurance 100% paid telemedicine, including mental health visits Employer contribution to Health Savings Account (HSA) Paid life and AD&D insurance Voluntary supplemental life and AD&D insurance Short-term and long-term disability insurance Paid maternity leave Leave of absence options Flexible Spending Accounts (FSAs) Employee Assistance Program (EAP) Benefits Resource Center Mobile Benefits App 401(k) plan with an excellent matching percentage! PTO and Holidays and more...
Job Details What You’ll Do Install, terminate, test, and troubleshoot cabling (CAT3/5/6, fiber, coax), patch panels, and cable management.
Build cabling support structures (ladder rack, tray, J-hooks) and perform circuit turn-ups.
Rack/stack and assist with PDU, switches/routers/optics, WAPs, and other transport gear.
Execute standard cable testing; operate wire mappers, tone/probe, and phone test sets.
Create clear design layout records (DLRs) and document all work in ticketing/project tools.
Respond to mission-critical alerts; follow escalation/notification procedures.
Provide remote terminal support (e.g., SSH) and vendor escorts; replace FRUs (HDD/RAM, etc.).
Partner with internal teams and customers to resolve L1 connectivity issues end-to-end.
What You Bring 1+ years in telecom/IT, solid grasp of L1 troubleshooting, and network topologies.
Working knowledge of CAT3/5/6 and single-/multi-mode fiber specs, and EIA/TIA color codes (T568A/B, 25-pair).
Comfortable with PDUs, fuse/alarm panels, and ESD-safe handling practices.
Proficiency with Microsoft Office and terminal tools (PuTTY/SSH) and strong written/verbal communication.
Organized, punctual, team-oriented, and thrives under pressure with excellent time management.
Able to work our graveyard shift (10 PM to 8 AM) with four 10s per week, and rotating shifts (when needed) to support 24/7/365 operations.
Occasional interstate travel.
Education: High school diploma or equivalent.
Nice to Have Certifications: CompTIA A+/Network+/Security+, OSHA-10, First Aid/CPR, Ladder/Scaffold Safety, Fire Extinguisher, HazMat.
If you’re hands-on, detail-driven, and love building pristine, reliable network infrastructure, we’d love to meet you.
Apply now.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $27
- $27 per hour A bit about us: Wanted: On-site Network Infrastructure Technician Level 1.
Network Infrastructure Technician I Are you looking for a great long-term career with growth opportunities? Join a 24/7/365, mission-critical environment supporting world-class data center connectivity.
As a Network Infrastructure Technician 1, you’ll install and maintain physical network media and provide “remote hands” support that keeps customers online and delighted.
Don't wait.
Interviews are going on now.
Apply today! Why join us? We offer several comprehensive benefit plans, and we cover 100% of Medical and Dental Insurance for you and your family! Other Benefits Include: Vision Insurance 100% paid telemedicine, including mental health visits Employer contribution to Health Savings Account (HSA) Paid life and AD&D insurance Voluntary supplemental life and AD&D insurance Short-term and long-term disability insurance Paid maternity leave Leave of absence options Flexible Spending Accounts (FSAs) Employee Assistance Program (EAP) Benefits Resource Center Mobile Benefits App 401(k) plan with an excellent matching percentage! PTO and Holidays and more...
Job Details What You’ll Do Install, terminate, test, and troubleshoot cabling (CAT3/5/6, fiber, coax), patch panels, and cable management.
Build cabling support structures (ladder rack, tray, J-hooks) and perform circuit turn-ups.
Rack/stack and assist with PDU, switches/routers/optics, WAPs, and other transport gear.
Execute standard cable testing; operate wire mappers, tone/probe, and phone test sets.
Create clear design layout records (DLRs) and document all work in ticketing/project tools.
Respond to mission-critical alerts; follow escalation/notification procedures.
Provide remote terminal support (e.g., SSH) and vendor escorts; replace FRUs (HDD/RAM, etc.).
Partner with internal teams and customers to resolve L1 connectivity issues end-to-end.
What You Bring 1+ years in telecom/IT, solid grasp of L1 troubleshooting, and network topologies.
Working knowledge of CAT3/5/6 and single-/multi-mode fiber specs, and EIA/TIA color codes (T568A/B, 25-pair).
Comfortable with PDUs, fuse/alarm panels, and ESD-safe handling practices.
Proficiency with Microsoft Office and terminal tools (PuTTY/SSH) and strong written/verbal communication.
Organized, punctual, team-oriented, and thrives under pressure with excellent time management.
Able to work our graveyard shift (10 PM to 8 AM) with four 10s per week, and rotating shifts (when needed) to support 24/7/365 operations.
Occasional interstate travel.
Education: High school diploma or equivalent.
Nice to Have Certifications: CompTIA A+/Network+/Security+, OSHA-10, First Aid/CPR, Ladder/Scaffold Safety, Fire Extinguisher, HazMat.
If you’re hands-on, detail-driven, and love building pristine, reliable network infrastructure, we’d love to meet you.
Apply now.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Lead Electrical Engineer
🏢 Jobot
Salary not disclosed
Urgently hiring Lead Electrical Engineer in Houston/TX (fully on site) This Jobot Job is hosted by: Doug Goldman Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $100,000
- $200,000 per year A bit about us: Our Client is an innovative cleantech startup on a mission to unlock ammonia's potential as a clean energy source Why join us? What You’ll Be Doing Collaborate with internal and external stakeholders to understand electrical system requirements and develop electrical power distribution system, instrumentation and control specifications to meet performance, safety, and regulatory standards.
Perform detailed electrical calculation and design for reactor’s electrical power distribution systems/equipment, cable installations, conduit installations, cable tray installations, and grounding systems in accordance with industry standards and the latest versions of manufacturer software and sizing guidelines.
Develop electrical wiring diagrams for sensors (pressure transducers, RTD sensors, flow meters, liquid level switches, etc.), and actuators (air compressor, pumps, VFDs, solenoid valves, proportional valves, mass flow controller, etc.).
Develop Instrumentation deliverables such as Instrument Indexes, Datasheets, Cable Schedules, Panel Layout & Wiring Drawings, Loop -Drawings, Location Plans, etc.
Select, procure, configure, and test of low-voltage and high-voltage instrumental devices and systems, such as sensors, actuators, air compressor, VFDs, electrical heaters, etc.
Specify the functions of low-power and high-power distribution system, and interface with contractor for system/cabinet built.
Design, assemble and test low-voltage and high-voltage cabinet, junction boxes and harnesses.
FAT and SAT low-voltage, high-voltage and PLC control cabinets Support testing facility electrical and control system commissioning and maintenance Design and Test interface circuits between instruments and PLC IO modules Develop and execute test plans to validate electrical systems and ensure compliance with project specifications, industry standards, and regulatory requirements.
Engage with external collaborators, including suppliers and manufacturers, to source and evaluate components, troubleshoot issues, and ensure quality.
Maintenance and operate facilities to resolve electrical operational or performance issues, such as commissioning and troubleshooting facility electrical systems, coordination with vendors and/or third-party engineering companies while adhering to the corporate MOC policy.
Job Details The minimum requirements we seek: BS in Electrical and Computer Engineering or related degree with 10+ years of professional experience in developing electrical/electronic, instrumentation and control systems.
Prior experience in selecting, configuring and testing the electrical / electronic components and instruments, such as motors, air compressors, pumps, VFDs, heaters, solenoid valves, proportional valves, mass flow controllers, gas analyzers, etc.
Prior experience in developing electrical wiring diagrams for sensors (pressure transducers, RTD sensors, flow meters, liquid level switches, etc.), and actuators (air compressor, solenoid valves, proportional valves, mass flow controller, etc.) using commercial electrical schematic design tools and software, such as SOLIDWORKS Electrical Schematic, Lucidchart, etc.
Prior experience in generating Instrument Indexes (Instrumentation and Control List) based on P&ID, and creating PLC IOs mapping for these Instrument Tags Prior experience in designing electrical schematics that interface the instruments with PLCs and the associated IO modules Prior experience in designing single line diagram (SLD) for power distribution system Prior experience in designing low-voltage and high-voltage enclosures and harnesses Prior experience in R&D Lab and commercial production facilities electrical system design, commissioning and maintenance.
Ability to work in a fast-paced environment with excellent written and verbal communication skills Ability to build and maintain strong working relationships with both internal teams and external partners.
Preferred Experience: 5+ years of experience in designing low-voltage and high-voltage electrical and instrumentation systems in accordance with industry standards per the National Electrical Code (NEC), International Electrotechnical Commission (IEC), American National Standards Institute (ANSI), etc.
10+ years of experience in designing electrical wiring diagrams for electrical instrument and control systems for petrochemical or pharmaceutical processes 10+ years of experience in specifying, selecting, configuring and testing low-voltage and high-voltage electrical equipment/instruments for petrochemical or pharmaceutical processes 5+ years of experience in designing and testing electrical circuits for motors, air compressors, pumps, heaters, solenoid valves, proportional valves, mass flow controllers, gas analyzers, etc.
Prior experience in selecting, and testing Industrial PLCs, and the associated IO and field BUS modules Prior experience in configuring PLC IO modules, testing and troubleshooting PLC based electrical and control systems.
Working knowledge of SCADA system and common field bus communication protocols (CANBUS, J1939, PROFINET, EtherCAT, ModBus, etc.).
Demonstration of strong work history with the ability to work autonomously and independently on projects with variety of complexity Demonstrated initiative, independent decision-making ability and skills in developing technical recommendations/solutions.
Demonstration of the capability of generating high-quality engineering design documents What We Offer: Competitive Medical, Dental & Vision Care FSA and HSA 401(k) with 5% company match Life insurance Flexible (PTO) Ancillary Benefits Employee Assistance Program (EAP) Open, supportive culture of drive and execution Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $100,000
- $200,000 per year A bit about us: Our Client is an innovative cleantech startup on a mission to unlock ammonia's potential as a clean energy source Why join us? What You’ll Be Doing Collaborate with internal and external stakeholders to understand electrical system requirements and develop electrical power distribution system, instrumentation and control specifications to meet performance, safety, and regulatory standards.
Perform detailed electrical calculation and design for reactor’s electrical power distribution systems/equipment, cable installations, conduit installations, cable tray installations, and grounding systems in accordance with industry standards and the latest versions of manufacturer software and sizing guidelines.
Develop electrical wiring diagrams for sensors (pressure transducers, RTD sensors, flow meters, liquid level switches, etc.), and actuators (air compressor, pumps, VFDs, solenoid valves, proportional valves, mass flow controller, etc.).
Develop Instrumentation deliverables such as Instrument Indexes, Datasheets, Cable Schedules, Panel Layout & Wiring Drawings, Loop -Drawings, Location Plans, etc.
Select, procure, configure, and test of low-voltage and high-voltage instrumental devices and systems, such as sensors, actuators, air compressor, VFDs, electrical heaters, etc.
Specify the functions of low-power and high-power distribution system, and interface with contractor for system/cabinet built.
Design, assemble and test low-voltage and high-voltage cabinet, junction boxes and harnesses.
FAT and SAT low-voltage, high-voltage and PLC control cabinets Support testing facility electrical and control system commissioning and maintenance Design and Test interface circuits between instruments and PLC IO modules Develop and execute test plans to validate electrical systems and ensure compliance with project specifications, industry standards, and regulatory requirements.
Engage with external collaborators, including suppliers and manufacturers, to source and evaluate components, troubleshoot issues, and ensure quality.
Maintenance and operate facilities to resolve electrical operational or performance issues, such as commissioning and troubleshooting facility electrical systems, coordination with vendors and/or third-party engineering companies while adhering to the corporate MOC policy.
Job Details The minimum requirements we seek: BS in Electrical and Computer Engineering or related degree with 10+ years of professional experience in developing electrical/electronic, instrumentation and control systems.
Prior experience in selecting, configuring and testing the electrical / electronic components and instruments, such as motors, air compressors, pumps, VFDs, heaters, solenoid valves, proportional valves, mass flow controllers, gas analyzers, etc.
Prior experience in developing electrical wiring diagrams for sensors (pressure transducers, RTD sensors, flow meters, liquid level switches, etc.), and actuators (air compressor, solenoid valves, proportional valves, mass flow controller, etc.) using commercial electrical schematic design tools and software, such as SOLIDWORKS Electrical Schematic, Lucidchart, etc.
Prior experience in generating Instrument Indexes (Instrumentation and Control List) based on P&ID, and creating PLC IOs mapping for these Instrument Tags Prior experience in designing electrical schematics that interface the instruments with PLCs and the associated IO modules Prior experience in designing single line diagram (SLD) for power distribution system Prior experience in designing low-voltage and high-voltage enclosures and harnesses Prior experience in R&D Lab and commercial production facilities electrical system design, commissioning and maintenance.
Ability to work in a fast-paced environment with excellent written and verbal communication skills Ability to build and maintain strong working relationships with both internal teams and external partners.
Preferred Experience: 5+ years of experience in designing low-voltage and high-voltage electrical and instrumentation systems in accordance with industry standards per the National Electrical Code (NEC), International Electrotechnical Commission (IEC), American National Standards Institute (ANSI), etc.
10+ years of experience in designing electrical wiring diagrams for electrical instrument and control systems for petrochemical or pharmaceutical processes 10+ years of experience in specifying, selecting, configuring and testing low-voltage and high-voltage electrical equipment/instruments for petrochemical or pharmaceutical processes 5+ years of experience in designing and testing electrical circuits for motors, air compressors, pumps, heaters, solenoid valves, proportional valves, mass flow controllers, gas analyzers, etc.
Prior experience in selecting, and testing Industrial PLCs, and the associated IO and field BUS modules Prior experience in configuring PLC IO modules, testing and troubleshooting PLC based electrical and control systems.
Working knowledge of SCADA system and common field bus communication protocols (CANBUS, J1939, PROFINET, EtherCAT, ModBus, etc.).
Demonstration of strong work history with the ability to work autonomously and independently on projects with variety of complexity Demonstrated initiative, independent decision-making ability and skills in developing technical recommendations/solutions.
Demonstration of the capability of generating high-quality engineering design documents What We Offer: Competitive Medical, Dental & Vision Care FSA and HSA 401(k) with 5% company match Life insurance Flexible (PTO) Ancillary Benefits Employee Assistance Program (EAP) Open, supportive culture of drive and execution Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
I&E Design Technician
🏢 Jobot
Salary not disclosed
Calling all IEC Engineering Techs This Jobot Job is hosted by: Mordy Ornguze Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $70,000
- $85,000 per year A bit about us: Our Company has been busy reducing global methane emissions, and revolutionizing landfill gas (LFG) collection and refinement technologies utilizing its own patented technologies.
We continue to seek out contacts within the municipal solid waste (MSW) sector via relationship-building with landfill owners, operators and waste management companies.
We qualify, finance, develop, install, and operate projects that capture and process vented and fugitive methane to generate new revenue streams and reduce compliance risk for landfill partners.
This position will assist in developing designs and drawings for control system & power distribution on industrial gas processing facility projects.
Minimum 4+ years of experience in Electrical, Instrumentation, and Control Systems for industrial gas processing facilities.
Proficiency in Microsoft Excel required; experience with AutoCAD and PDF editing software is beneficial.
***This position is onsite in Midland, TX with relocation assistance for the right person
*** Why join us? Benefits: Dental insurance Disability insurance Health insurance Life insurance Retirement plan Relocation assistance Job Details
***This position is onsite in Midland, TX with relocation assistance for the right person
*** Technical Support & Standards Provide technical expertise and support across all projects.
Develop, maintain, and enforce standard processes, procedures, and continuous improvement initiatives.
Review departmental work for accuracy, completeness, and adherence to standards.
Participate in facility design reviews and electrical construction bid package development.
Support training activities to enhance technical capability.
Engage and support IC&E Manager task distribution.
Participate in the development of electrical construction bid packages.
Instrumentation, Controls & Electrical (IC&E) Collaborate with the I&E Manager to establish data entry points for instruments and control function.
Develop instrumentation, I/O controls, and motor control/distribution from standard P&IDs.
Specify and procure electrical instruments and equipment in coordination with project needs.
Electrical Design Assist in developing electrical deliverables for all project phases (conceptual, preliminary, detailed design).
Support design of facility power distribution systems from electric utility interface point, PLC-based control systems, and miscellaneous electrical systems (lighting, grounding, heat tracing, etc.).
Contribute to preparation of electrical design drawings such as: •Single line diagrams •Power lighting, grounding, control panel, and other system plans.
•Electrical equipment arrangement plans •Cable tray layout plans and sections •Conduit and cable schedules •Motor control schematics Assist with typical electrical specifications (e.g., MV/LV switchgear, MCCs, transformers, generators, UPSs, installation/testing requirements).
Develop and maintain electrical databases/spreadsheets (e.g., motor lists, load lists, instrumentation spreadsheets).
Assist with electrical calculations (e.g., load flow studies, voltage drop, lighting, short circuit a protective device coordination analyses, arc flash and labeling).
Support management of third-party engineering firms, including backchecking their deliverables.
Procurement & Vendor Management: Participate in procurement of electrical and control systems equipment, including preparation of technical data for inquiry packages, technical bid evaluations, and vendor document reviews.
Oversee procurement of equipment required by the I&E department.
Fabrication, Construction & Commissioning Support: Support project construction through meetings, RFIs, and occasional site visits.
Inspect electrical installations and equipment for compliance with engineering documents, specifications, and safety standards.
Assist with development of standard operating procedures (SOPs) for electrical systems and equipment.
Supervise yard/shop contractors for electrical fabrication activities.
Other Duties: Perform additional tasks as assigned to support department and project success.
Participate in continuous improvement program Knowledge, Skills and Abilities: Strong knowledge of electrical design practices and interpretation of P&IDs, electrical drawings, specifications, building/electrical codes, and construction costs/techniques.
Working knowledge of the NEC and applicable electrical codes, with familiarity in industry codes and standards (IEC, ANSI, IEEE, ISA).
Knowledge of NEC/NFPA standards is beneficial.
Knowledge of VFD/motor control equipment beneficial.
Ability to work independently and collaboratively with engineers and designers on multiple concurrent projects.
Excellent organizational, written, and verbal communication skills; able to convey ideas clearly and concisely.
Demonstrated accountability
- accepts responsibility for actions and follows through on commitments.
Proficiency with personal computers, office networks, and Microsoft Office (Word, Excel, PowerPoint, Access).
Bachelor’s degree in electrical engineering or related field is valued but not required; equivalent experience and industry knowledge is beneficial.
Physical/Work Environment: Primarily office-based, with extended periods of sedentary computer work.
Occasional outdoor activities for equipment inspections and coordination.
Ability to lift up to 20 lbs.
and perform repetitive hand/finger tasks (typing, mobile communication).
Requires strong visual and auditory attention for design and field work.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $70,000
- $85,000 per year A bit about us: Our Company has been busy reducing global methane emissions, and revolutionizing landfill gas (LFG) collection and refinement technologies utilizing its own patented technologies.
We continue to seek out contacts within the municipal solid waste (MSW) sector via relationship-building with landfill owners, operators and waste management companies.
We qualify, finance, develop, install, and operate projects that capture and process vented and fugitive methane to generate new revenue streams and reduce compliance risk for landfill partners.
This position will assist in developing designs and drawings for control system & power distribution on industrial gas processing facility projects.
Minimum 4+ years of experience in Electrical, Instrumentation, and Control Systems for industrial gas processing facilities.
Proficiency in Microsoft Excel required; experience with AutoCAD and PDF editing software is beneficial.
***This position is onsite in Midland, TX with relocation assistance for the right person
*** Why join us? Benefits: Dental insurance Disability insurance Health insurance Life insurance Retirement plan Relocation assistance Job Details
***This position is onsite in Midland, TX with relocation assistance for the right person
*** Technical Support & Standards Provide technical expertise and support across all projects.
Develop, maintain, and enforce standard processes, procedures, and continuous improvement initiatives.
Review departmental work for accuracy, completeness, and adherence to standards.
Participate in facility design reviews and electrical construction bid package development.
Support training activities to enhance technical capability.
Engage and support IC&E Manager task distribution.
Participate in the development of electrical construction bid packages.
Instrumentation, Controls & Electrical (IC&E) Collaborate with the I&E Manager to establish data entry points for instruments and control function.
Develop instrumentation, I/O controls, and motor control/distribution from standard P&IDs.
Specify and procure electrical instruments and equipment in coordination with project needs.
Electrical Design Assist in developing electrical deliverables for all project phases (conceptual, preliminary, detailed design).
Support design of facility power distribution systems from electric utility interface point, PLC-based control systems, and miscellaneous electrical systems (lighting, grounding, heat tracing, etc.).
Contribute to preparation of electrical design drawings such as: •Single line diagrams •Power lighting, grounding, control panel, and other system plans.
•Electrical equipment arrangement plans •Cable tray layout plans and sections •Conduit and cable schedules •Motor control schematics Assist with typical electrical specifications (e.g., MV/LV switchgear, MCCs, transformers, generators, UPSs, installation/testing requirements).
Develop and maintain electrical databases/spreadsheets (e.g., motor lists, load lists, instrumentation spreadsheets).
Assist with electrical calculations (e.g., load flow studies, voltage drop, lighting, short circuit a protective device coordination analyses, arc flash and labeling).
Support management of third-party engineering firms, including backchecking their deliverables.
Procurement & Vendor Management: Participate in procurement of electrical and control systems equipment, including preparation of technical data for inquiry packages, technical bid evaluations, and vendor document reviews.
Oversee procurement of equipment required by the I&E department.
Fabrication, Construction & Commissioning Support: Support project construction through meetings, RFIs, and occasional site visits.
Inspect electrical installations and equipment for compliance with engineering documents, specifications, and safety standards.
Assist with development of standard operating procedures (SOPs) for electrical systems and equipment.
Supervise yard/shop contractors for electrical fabrication activities.
Other Duties: Perform additional tasks as assigned to support department and project success.
Participate in continuous improvement program Knowledge, Skills and Abilities: Strong knowledge of electrical design practices and interpretation of P&IDs, electrical drawings, specifications, building/electrical codes, and construction costs/techniques.
Working knowledge of the NEC and applicable electrical codes, with familiarity in industry codes and standards (IEC, ANSI, IEEE, ISA).
Knowledge of NEC/NFPA standards is beneficial.
Knowledge of VFD/motor control equipment beneficial.
Ability to work independently and collaboratively with engineers and designers on multiple concurrent projects.
Excellent organizational, written, and verbal communication skills; able to convey ideas clearly and concisely.
Demonstrated accountability
- accepts responsibility for actions and follows through on commitments.
Proficiency with personal computers, office networks, and Microsoft Office (Word, Excel, PowerPoint, Access).
Bachelor’s degree in electrical engineering or related field is valued but not required; equivalent experience and industry knowledge is beneficial.
Physical/Work Environment: Primarily office-based, with extended periods of sedentary computer work.
Occasional outdoor activities for equipment inspections and coordination.
Ability to lift up to 20 lbs.
and perform repetitive hand/finger tasks (typing, mobile communication).
Requires strong visual and auditory attention for design and field work.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Low Voltage Design Engineer
🏢 Jobot
Salary not disclosed
Low Voltage Design Engineer for a leading design firm in LA! This Jobot Job is hosted by: Michael Ramsey Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $90,000
- $130,000 per year A bit about us: Dive into the world of innovation, precision, and sustainable design with our talented professionals diverse portfolio of projects.
Each endeavor showcases our unwavering commitment to excellence, our ability to understand unique client needs, and our passion for pushing the boundaries of engineering.
From iconic infrastructures to state-of-the-art facilities, our projects are a testament to our team’s expertise and the trust our clients place in us.
Explore our curated selection of projects and witness the tangible manifestations of our engineering prowess and vision.
Why join us? Our culture is the bedrock upon which our engineering marvels are built.
It’s an environment where innovation thrives, ideas flourish, and every voice matters.
Our ethos is rooted in a deep-seated belief that engineering is more than just technical expertise; it’s a confluence of creativity, collaboration, and commitment; it’s a way of life.
It’s what sets us apart, fuels our passion, and drives us to create engineering solutions that make a difference.
Medical Dental 401k Job Details Job Details: Are you energized by solving complex engineering problems? Do you have a knack for innovative design solutions in the low voltage sector? If so, we have an exciting opportunity for you! We are seeking a highly motivated, detail-oriented Permanent Low Voltage Design Engineer to join our dynamic team.
This role offers the chance to work on a wide variety of projects and to be part of a team that is passionate about excellence in engineering.
With a focus on low voltage systems, you will have the opportunity to work on projects that impact people's lives and help shape the future of our built environment.
Responsibilities: As a Permanent Low Voltage Design Engineer, you will be responsible for a wide range of tasks, including but not limited to: 1.
Designing, planning, and overseeing the installation of low voltage systems, including CCTV, video surveillance, fire alarm systems, and structured cabling systems.
2.
Developing detailed design drawings and specifications for mechanical equipment, dies/tools, and controls, using computer-assisted drafting (CAD) equipment.
3.
Coordinating with contractors to monitor project progress and ensure conformance to design specifications and safety or sanitation standards.
4.
Directing, reviewing, and approving project design changes.
5.
Confer with engineers, customers, and others to discuss existing or potential engineering projects and products.
6.
Designing and implementing conduit layouts for low voltage systems.
7.
Utilizing Revit to create 3D models of low voltage systems.
8.
Ensuring all work is carried out in accordance with company policies, procedures, and standards to support overall departmental and organizational objectives.
Qualifications: To be successful in this role, you will need: 1.
A Bachelor's degree in Electrical Engineering or a related field.
2.
A minimum of 5 years' experience in low voltage design engineering, specifically with CCTV, video surveillance, fire alarm systems, and structured cabling systems.
3.
Proficiency in Revit and other CAD software.
4.
Familiarity with conduit layout and design for low voltage systems.
5.
Strong problem-solving skills and the ability to think creatively to develop innovative solutions.
6.
Excellent communication skills, both written and verbal.
7.
The ability to work effectively both independently and as part of a team.
8.
A strong commitment to safety and adherence to applicable codes and regulations.
9.
Professional Engineer (PE) license is preferred but not required.
If you are a passionate engineer with a strong background in low voltage systems, we would love to hear from you.
This is your opportunity to join a team where you can make your mark and contribute to creating a better tomorrow.
Apply today! Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $90,000
- $130,000 per year A bit about us: Dive into the world of innovation, precision, and sustainable design with our talented professionals diverse portfolio of projects.
Each endeavor showcases our unwavering commitment to excellence, our ability to understand unique client needs, and our passion for pushing the boundaries of engineering.
From iconic infrastructures to state-of-the-art facilities, our projects are a testament to our team’s expertise and the trust our clients place in us.
Explore our curated selection of projects and witness the tangible manifestations of our engineering prowess and vision.
Why join us? Our culture is the bedrock upon which our engineering marvels are built.
It’s an environment where innovation thrives, ideas flourish, and every voice matters.
Our ethos is rooted in a deep-seated belief that engineering is more than just technical expertise; it’s a confluence of creativity, collaboration, and commitment; it’s a way of life.
It’s what sets us apart, fuels our passion, and drives us to create engineering solutions that make a difference.
Medical Dental 401k Job Details Job Details: Are you energized by solving complex engineering problems? Do you have a knack for innovative design solutions in the low voltage sector? If so, we have an exciting opportunity for you! We are seeking a highly motivated, detail-oriented Permanent Low Voltage Design Engineer to join our dynamic team.
This role offers the chance to work on a wide variety of projects and to be part of a team that is passionate about excellence in engineering.
With a focus on low voltage systems, you will have the opportunity to work on projects that impact people's lives and help shape the future of our built environment.
Responsibilities: As a Permanent Low Voltage Design Engineer, you will be responsible for a wide range of tasks, including but not limited to: 1.
Designing, planning, and overseeing the installation of low voltage systems, including CCTV, video surveillance, fire alarm systems, and structured cabling systems.
2.
Developing detailed design drawings and specifications for mechanical equipment, dies/tools, and controls, using computer-assisted drafting (CAD) equipment.
3.
Coordinating with contractors to monitor project progress and ensure conformance to design specifications and safety or sanitation standards.
4.
Directing, reviewing, and approving project design changes.
5.
Confer with engineers, customers, and others to discuss existing or potential engineering projects and products.
6.
Designing and implementing conduit layouts for low voltage systems.
7.
Utilizing Revit to create 3D models of low voltage systems.
8.
Ensuring all work is carried out in accordance with company policies, procedures, and standards to support overall departmental and organizational objectives.
Qualifications: To be successful in this role, you will need: 1.
A Bachelor's degree in Electrical Engineering or a related field.
2.
A minimum of 5 years' experience in low voltage design engineering, specifically with CCTV, video surveillance, fire alarm systems, and structured cabling systems.
3.
Proficiency in Revit and other CAD software.
4.
Familiarity with conduit layout and design for low voltage systems.
5.
Strong problem-solving skills and the ability to think creatively to develop innovative solutions.
6.
Excellent communication skills, both written and verbal.
7.
The ability to work effectively both independently and as part of a team.
8.
A strong commitment to safety and adherence to applicable codes and regulations.
9.
Professional Engineer (PE) license is preferred but not required.
If you are a passionate engineer with a strong background in low voltage systems, we would love to hear from you.
This is your opportunity to join a team where you can make your mark and contribute to creating a better tomorrow.
Apply today! Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Electrical Engineer (PE)
🏢 Jobot
Salary not disclosed
Calling all Electrical Engineer (PE) This Jobot Job is hosted by: Mordy Ornguze Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $78,000
- $190,000 per year A bit about us: We are seeking a highly skilled Electrical Engineer (PE) with 4 to 15 years of experience to join our growing engineering team.
This role supports the design and delivery of MEP and mission‑critical electrical systems for commercial, industrial, and data center environments.
Ideal candidates are detail‑oriented, technically strong, and passionate about delivering high‑availability, resilient engineering solutions.
Why join us? Why Join Us? Opportunity to work on complex, high‑impact engineering projects.
Supportive, engineering‑driven culture with growth and mentorship opportunities.
Competitive compensation and benefits.
Stability and long‑term project pipeline in both markets (Plano, TX and Albany, NY).
Job Details Electrical Design & Engineering Design electrical power distribution systems including medium and low voltage, grounding, lighting, and emergency/backup power systems.
Produce high‑quality engineering drawings, specifications, one‑line diagrams, and calculation packages.
Perform arc flash, load flow, fault current, and coordination studies.
Create electrical system layouts such as cable tray routing, panel schedules, equipment selections, and device layouts.
Project Execution & Coordination Lead or contribute to multidisciplinary project teams across mechanical, electrical, plumbing, and commissioning disciplines.
Perform site surveys, field verification, and construction administration support (submittals, RFIs, punch lists, site observations).
Support project documentation including basis‑of‑design narratives, design reports, and technical memoranda.
Work closely with internal teams, architects, contractors, and stakeholders to ensure seamless project delivery.
Quality, Compliance, & Reliability Apply relevant codes and standards (NEC, NFPA, IEEE, ASHRAE, IBC, etc.).
Ensure designs meet high‑availability and mission‑critical requirements such as redundancy, maintainability, and lifecycle performance.
Maintain rigorous QA/QC throughout project development.
Technical Leadership & Collaboration Mentor junior engineers and designers, providing technical guidance and training.
Participate in internal design reviews and collaborate across disciplines to develop efficient, coordinated MEP solutions.
Interface with equipment vendors, contractors, and clients to ensure accurate system integration.
Qualifications Required Bachelor’s degree in Electrical Engineering from an accredited institution.
Active U.S.
Professional Engineer (PE) license.
4–15 years of experience in electrical engineering within MEP consulting, building systems, industrial, or mission‑critical environments.
Proficiency with AutoCAD and/or Revit; familiarity with Bluebeam and Microsoft Office.
Demonstrated experience producing full electrical design packages.
Strong understanding of electrical codes, standards, and calculations.
Preferred Experience with mission‑critical / data center electrical systems.
Experience with short‑circuit, arc flash, load flow, and coordination studies using ETAP or SKM.
Commissioning support experience.
Multi‑state design exposure or ability to obtain additional licensure.
What We’re Looking For Strong communication and interpersonal skills.
Problem‑solvers who take initiative and collaborate naturally.
Engineers who thrive in a fast‑paced environment and deliver high‑quality, technically excellent work.
Individuals aligned with our values: collaboration, innovation, technical rigor, and commitment to client success.
Work Environment Office‑based with occasional site visits.
Opportunities to work on advanced MEP systems and mission‑critical facilities.
Collaborative team environment with cross‑disciplinary coordination.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $78,000
- $190,000 per year A bit about us: We are seeking a highly skilled Electrical Engineer (PE) with 4 to 15 years of experience to join our growing engineering team.
This role supports the design and delivery of MEP and mission‑critical electrical systems for commercial, industrial, and data center environments.
Ideal candidates are detail‑oriented, technically strong, and passionate about delivering high‑availability, resilient engineering solutions.
Why join us? Why Join Us? Opportunity to work on complex, high‑impact engineering projects.
Supportive, engineering‑driven culture with growth and mentorship opportunities.
Competitive compensation and benefits.
Stability and long‑term project pipeline in both markets (Plano, TX and Albany, NY).
Job Details Electrical Design & Engineering Design electrical power distribution systems including medium and low voltage, grounding, lighting, and emergency/backup power systems.
Produce high‑quality engineering drawings, specifications, one‑line diagrams, and calculation packages.
Perform arc flash, load flow, fault current, and coordination studies.
Create electrical system layouts such as cable tray routing, panel schedules, equipment selections, and device layouts.
Project Execution & Coordination Lead or contribute to multidisciplinary project teams across mechanical, electrical, plumbing, and commissioning disciplines.
Perform site surveys, field verification, and construction administration support (submittals, RFIs, punch lists, site observations).
Support project documentation including basis‑of‑design narratives, design reports, and technical memoranda.
Work closely with internal teams, architects, contractors, and stakeholders to ensure seamless project delivery.
Quality, Compliance, & Reliability Apply relevant codes and standards (NEC, NFPA, IEEE, ASHRAE, IBC, etc.).
Ensure designs meet high‑availability and mission‑critical requirements such as redundancy, maintainability, and lifecycle performance.
Maintain rigorous QA/QC throughout project development.
Technical Leadership & Collaboration Mentor junior engineers and designers, providing technical guidance and training.
Participate in internal design reviews and collaborate across disciplines to develop efficient, coordinated MEP solutions.
Interface with equipment vendors, contractors, and clients to ensure accurate system integration.
Qualifications Required Bachelor’s degree in Electrical Engineering from an accredited institution.
Active U.S.
Professional Engineer (PE) license.
4–15 years of experience in electrical engineering within MEP consulting, building systems, industrial, or mission‑critical environments.
Proficiency with AutoCAD and/or Revit; familiarity with Bluebeam and Microsoft Office.
Demonstrated experience producing full electrical design packages.
Strong understanding of electrical codes, standards, and calculations.
Preferred Experience with mission‑critical / data center electrical systems.
Experience with short‑circuit, arc flash, load flow, and coordination studies using ETAP or SKM.
Commissioning support experience.
Multi‑state design exposure or ability to obtain additional licensure.
What We’re Looking For Strong communication and interpersonal skills.
Problem‑solvers who take initiative and collaborate naturally.
Engineers who thrive in a fast‑paced environment and deliver high‑quality, technically excellent work.
Individuals aligned with our values: collaboration, innovation, technical rigor, and commitment to client success.
Work Environment Office‑based with occasional site visits.
Opportunities to work on advanced MEP systems and mission‑critical facilities.
Collaborative team environment with cross‑disciplinary coordination.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
D
Software Developer - Hybrid
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Marshelin, at (224) 507-1280 , or Saravana Kumar, at 224-507-1183 Title: Software Developer
- Hybrid Duration: 6 Months Location: Wilmington, NC Schedule: Monday
- Friday, 8 AM
- 5 PM (flexible on hours) Please submit local candidates only.
Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Work Schedule At least 1 day per week on-site.
Description: Job Summary: This role focuses on software development and systems integration within the Autodesk ecosystem, specifically leveraging Autodesk APIs and Fusion Manage workspaces.
The position supporting the optical fiber cable business.
The developer will design, implement, and maintain custom solutions that enhance product lifecycle management (PLM) workflows, automate data exchange, and improve user experience across Autodesk platforms.
The role involves typical software development responsibilities, front-end and some back-end work, using tools like Visual Studio and Git.
Key responsibilities include: Developing and maintaining applications using Autodesk Vault, Fusion Manage APIs,(no prior experience required but a major bonus) and other Autodesk web services.
Creating and customizing Fusion Manage workspaces to support business processes.
Writing clean, efficient, and well-documented code in C# and JavaScript.
Collaborating with cross-functional teams to gather requirements and deliver scalable solutions.
Managing the software development lifecycle, including version control, testing, deployment, and documentation within a GIT environment.
Ensuring code quality and consistency across platforms and integrations.
Requirements: Solid understanding of Autodesk APIs, Fusion Manage workspace configuration, and PLM concepts.
Proficiency in C# and JavaScript, with experience in web development and RESTful API integration.
Must have experience with Git and Visual Studio and General software engineering responsibilities.
Intermediate technical knowledge with the ability to implement standard procedures and propose workflow improvements.
Capable of solving moderately complex problems independently and contributing to team-based solutions.
Experience working under general supervision with initiative in continuous improvement.
Strong communication skills for internal collaboration and occasional external engagement.
Ability to train new team members on established procedures and tools.
Top Skills/Experience Java Script REST API GIT Desired Experience: 3 years of software development experience, preferably in a PLM or CAD-integrated environment.
PLM (Product Lifecycle Management) development nice to have Prior experience with Autodesk Vault, Fusion Manage, or similar platforms is highly desirable.
Major Bonus Autodesk Fusion Manage experience.
This is rare and not expected, but highly valuable.
Education Requirements Minimum suggested: Associate degree or similar Interview Process Phone screen In person lunch interview About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
C#, CAD, PLM, APIs, Git and Visual Studio
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Marshelin, at (224) 507-1280 , or Saravana Kumar, at 224-507-1183 Title: Software Developer
- Hybrid Duration: 6 Months Location: Wilmington, NC Schedule: Monday
- Friday, 8 AM
- 5 PM (flexible on hours) Please submit local candidates only.
Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Work Schedule At least 1 day per week on-site.
Description: Job Summary: This role focuses on software development and systems integration within the Autodesk ecosystem, specifically leveraging Autodesk APIs and Fusion Manage workspaces.
The position supporting the optical fiber cable business.
The developer will design, implement, and maintain custom solutions that enhance product lifecycle management (PLM) workflows, automate data exchange, and improve user experience across Autodesk platforms.
The role involves typical software development responsibilities, front-end and some back-end work, using tools like Visual Studio and Git.
Key responsibilities include: Developing and maintaining applications using Autodesk Vault, Fusion Manage APIs,(no prior experience required but a major bonus) and other Autodesk web services.
Creating and customizing Fusion Manage workspaces to support business processes.
Writing clean, efficient, and well-documented code in C# and JavaScript.
Collaborating with cross-functional teams to gather requirements and deliver scalable solutions.
Managing the software development lifecycle, including version control, testing, deployment, and documentation within a GIT environment.
Ensuring code quality and consistency across platforms and integrations.
Requirements: Solid understanding of Autodesk APIs, Fusion Manage workspace configuration, and PLM concepts.
Proficiency in C# and JavaScript, with experience in web development and RESTful API integration.
Must have experience with Git and Visual Studio and General software engineering responsibilities.
Intermediate technical knowledge with the ability to implement standard procedures and propose workflow improvements.
Capable of solving moderately complex problems independently and contributing to team-based solutions.
Experience working under general supervision with initiative in continuous improvement.
Strong communication skills for internal collaboration and occasional external engagement.
Ability to train new team members on established procedures and tools.
Top Skills/Experience Java Script REST API GIT Desired Experience: 3 years of software development experience, preferably in a PLM or CAD-integrated environment.
PLM (Product Lifecycle Management) development nice to have Prior experience with Autodesk Vault, Fusion Manage, or similar platforms is highly desirable.
Major Bonus Autodesk Fusion Manage experience.
This is rare and not expected, but highly valuable.
Education Requirements Minimum suggested: Associate degree or similar Interview Process Phone screen In person lunch interview About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
C#, CAD, PLM, APIs, Git and Visual Studio
Remote working/work at home options are available for this role.
Not Specified
J
Principal Electrical Engineer
🏢 Jobot
Salary not disclosed
This Jobot Job is hosted by: Amber Wood Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $120,000
- $180,000 per year A bit about us: Our services include construction management, fabrication, erection, mechanical installation, and plant maintenance for heavy industrial, commercial, and roadway projects, as well as a full spectrum of golf course construction and management services.
Why join us? Short Term/Long Term Disability Critical Illness Plan Employee Assistance Program Paid Vacation Paid Holidays 401(k) with Employer Match Job Details The Electrical Construction Superintendent is responsible for planning, directing, and coordinating all electrical related activities and coordinating electrical subcontractor activities including underground duct banks, sub-stations, electrical distribution, cable tray, E-rooms, automation, instrumentation, etc.
Participate in the conceptual development of a construction project and oversee its organization, scheduling, budgeting, and implementation.
Electrical Construction Superintendent Essential Duties and Responsibilities Will require field supervision of construction.
Assume overall responsibilities for project execution of assigned projects.
Must promote, enforce, and establish safety as a priority.
Initiate, establish, and maintain working relationships with supervisory personnel, owners, contractors, or design professionals to facilitate construction activities and progress.
Plan, schedule, and coordinate electrical activities to meet deadlines.
Prepare and submit budget estimates, progress reports, or cost tracking reports.
Inspect or review projects to monitor compliance with building and safety codes, or other regulations.
Review change orders requests for validity and assist in review for presentation to owner.
May be responsible for quoting new work by preparing detailed job bids.
Responsible for reporting productivity and activities to the project management team.
Review and approve subcontractor billings to the client, as well as manage client payables.
Organize and manage all aspects of client interaction and communication.
Manage project closeout process.
The ability to work overtime and regular, punctual attendance is required.
Electrical Construction Superintendent Qualifications Minimum of 10 years’ experience as a manager of electrical related projects.
Specific experience in installation of Steel or Aluminum process equipment is desired.
Good oral communication skills.
Must be knowledgeable of the company safety policy and familiar and willing to comply with the Quality Control program.
Proficient in Microsoft Word and Excel.
Experience with Primavera Scheduling software is a plus.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $120,000
- $180,000 per year A bit about us: Our services include construction management, fabrication, erection, mechanical installation, and plant maintenance for heavy industrial, commercial, and roadway projects, as well as a full spectrum of golf course construction and management services.
Why join us? Short Term/Long Term Disability Critical Illness Plan Employee Assistance Program Paid Vacation Paid Holidays 401(k) with Employer Match Job Details The Electrical Construction Superintendent is responsible for planning, directing, and coordinating all electrical related activities and coordinating electrical subcontractor activities including underground duct banks, sub-stations, electrical distribution, cable tray, E-rooms, automation, instrumentation, etc.
Participate in the conceptual development of a construction project and oversee its organization, scheduling, budgeting, and implementation.
Electrical Construction Superintendent Essential Duties and Responsibilities Will require field supervision of construction.
Assume overall responsibilities for project execution of assigned projects.
Must promote, enforce, and establish safety as a priority.
Initiate, establish, and maintain working relationships with supervisory personnel, owners, contractors, or design professionals to facilitate construction activities and progress.
Plan, schedule, and coordinate electrical activities to meet deadlines.
Prepare and submit budget estimates, progress reports, or cost tracking reports.
Inspect or review projects to monitor compliance with building and safety codes, or other regulations.
Review change orders requests for validity and assist in review for presentation to owner.
May be responsible for quoting new work by preparing detailed job bids.
Responsible for reporting productivity and activities to the project management team.
Review and approve subcontractor billings to the client, as well as manage client payables.
Organize and manage all aspects of client interaction and communication.
Manage project closeout process.
The ability to work overtime and regular, punctual attendance is required.
Electrical Construction Superintendent Qualifications Minimum of 10 years’ experience as a manager of electrical related projects.
Specific experience in installation of Steel or Aluminum process equipment is desired.
Good oral communication skills.
Must be knowledgeable of the company safety policy and familiar and willing to comply with the Quality Control program.
Proficient in Microsoft Word and Excel.
Experience with Primavera Scheduling software is a plus.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
jobs by
✓ All jobs loaded