Cable Remote Codes Jobs Remote Jobs in Usa

• 
  
• Follows standard work methods on recurring assignments but receives explicit instructions on unfamiliar assignments; technical adequacy of routine work is reviewed on completion; non routine work may also be reviewed in process.
  
• Following specific instructions, assembles or constructs simple or standard equipment or parts; may service or repair simple instruments or equipment.
  
• Conducts a variety of tests using established methods.
  
• Prepares test specimens, adjusts and operates equipment, and records test data, pointing out deviations resulting from equipment malfunction or observational errors.
  
• Extracts engineering data from various prescribed but non standardized sources; processes the data following well-defined methods including elementary algebra and geometry; presents the data in prescribed form.
  
• Other duties may be assigned to include overtime work to complete production requirements.
  

• 
  
• High School diploma and 4 years prior related experience.
  
• Demonstrated ability to read and interpret cable assembly drawings.
  
• Demonstrated ability to read and execute hydrostatic pressure tank procedures.
  
• Ability to obtain L3Harris certification to operate forklifts.
  
• Must be able to lift up to 35 pounds independently.
  
• Must be able to traverse ladders.
  

Feyen Zylstra is a team of hardworking doers and thinkers proud to use our brains and brawn to solve the complex problems associated with the design, installation, and maintenance of electrical and low voltage systems. We tend to work in industries like healthcare, industrial manufacturing, commercial, and data centers where our customer benefit most from our technical expertise and the experience we provide them.

We exist to have a positive impact on the lives of people. This starts with our FZers and a commitment to providing safe and energizing work environments, opportunities to learn and grow, and great pay and benefits. It then moves to our customers and a passion for helping them solve their most challenging problems. When we are successful in meeting the needs of our employees and our customers, we have the opportunity to have a positive impact well beyond ourselves in each of the communities where we live and work.

FZ is headquartered in Grand Rapids, Michigan and is focused on serving customers throughout Michigan, Tennessee, and the Carolinas.

FZ is looking for a Lead Structured Cabling (Technology Infrastructure) Technician for our Grand Rapids, MI branch. As an onsite project leader, this role ensures successful project completion by supervising installations, troubleshooting, and maintenance within commercial and industrial settings as well as providing onsite leadership and support to other Technicians.

What We’re Looking for:

• A Safe Worker. Safety is more than just a job requirement for you – it’s a non-negotiable. You understand the importance of safety and are committed to keeping yourself and those around you safe. You are diligent in flagging and communicating potential risks and unsafe conditions.
• A Tradesperson. You have worked hard to cultivate your craft and take pride in what you’re able to accomplish. You are a professional who is accurate, customer-focused, credible, and organized. You effectively manage your time and work well under pressure. You have the technical and mechanical aptitude needed to solve problems and perform your work efficiently and to quality standards.
• A Resource: People go to you for help because of your expertise. You leverage your experience and expertise to identify issues, determine a course of action, and present solutions. You assign tasks, track resources, and oversee progress. You’re known for being a knowledge source. You are ready and willing to plug in and help as needed.
• A Coach. You recognize that our crews in the field are our biggest asset. You take the time to train, develop, mentor, coach, and discipline employees in a respectful and thoughtful manner. People follow you because they know you care about them.
• A Problem Solver. Your skills include prioritization, delegation, risk assessment, communicating, and multi-tasking. When problems arise, things get off track, or an emergency presents itself, you roll up your sleeves to collaborate, direct, and get the job done.
• A Relationship Builder. Whether it’s with a customer, supplier, vendor, or coworker, you value the importance of relationships. You collaborate with others to resolve conflict. You treat others with respect. You appreciate differences. You communicate effectively.

Key Qualifications:

• High School Diploma or GED.
• 5+ years in the communications industry required.
• BICSI Technician certification preferred.
• Advanced knowledge of telecommunications, data, AV, network infrastructure cabling and components required.
• Maintain and reference industry standards including BICSI, ANSI, EIA/TIA, and local Low Voltage Code.
• Proficient in the use of Microsoft Word, Excel and Outlook or has the ability to learn technology and software.
• Skilled at reading and following blueprints and electrical schematics.
• Ability to informally lead others, including directing work and coaching for improvement.
• Demonstrated focus on safety, quality, customer service and goal attainment.
• Ability to travel regionally to project sites as needed.

We offer generous benefits, competitive compensation, paid time off, training and development, the opportunity for growth, a safe work environment, and the chance to work with a winning team in a great company culture. Candidates are required to pass a pre-employment drug screen. FZ is an Equal Opportunity Employer and considers applicants without regard to race, color, religion, sex, national origin, or other protected classes.

Are you an experienced leader in Distributed Antenna Systems (DAS) installation, ready to take on large-scale projects and mentor a team? As a Lead DAS Installer, you'll lead the charge in implementing wireless solutions for in-building distributed antenna systems. You’ll oversee a crew of 3-5 installers, ensuring the highest quality standards are met on every job site. This is a hands-on role, working closely with the Project Manager and installation teams to deliver seamless wireless coverage.

Your expertise will help guide the team in reading blueprints, installing DAS equipment, and configuring advanced systems. This is an exciting opportunity for a motivated leader who enjoys working in dynamic environments across the country.

Key Responsibilities:

• Lead Installation Crews: Oversee installation teams, providing guidance, training, and mentorship to 3-5 technicians throughout the project lifecycle.
• DAS Equipment Installation: Install outdoor and indoor antennas, coaxial cables, CATV, fiber optic cables, CAT 5/6, and DC power cables to NEC standards.
• Cabling & Testing: Perform advanced cable terminations, including coaxial (JMA, Andrews, Trilogy), fiber fusion splicing, OTDR testing, and coaxial PIM/Sweep testing.
• System Configuration & Integration: Configure and integrate DAS head-end systems such as Rectifiers, Battery Systems, VoltServer, Commscope iON-B and iON-U, JMA Teko, and Corning Mobile Access. Manage monitoring systems including T1, broadband backhaul, routers, and dry contact alarms.
• Project Reporting & Communication: Keep both the company and clients informed about project progress, safety standards, and local codes. Update and maintain project documentation, customer prints, and site reports.
• Site Surveys & RF Design: Conduct site surveys to troubleshoot and optimize RF/fiber optic installations, report findings, and design corrective solutions for inadequate coverage.
• Assist in Project Preparation: Help in proposal development, project scheduling, and materials/subcontractor selection processes.
• Warehouse Support: Assist with warehouse maintenance, inventory management, and ensuring adequate materials for upcoming projects.

Minimum Qualifications:

• Experience:
• A minimum of 5 years of in-building DAS installation experience.
• Extensive experience with cable installation in IT, RF, electrical, and/or telecommunications fields.
• Expertise in fiber fusion splicing, terminations, dressing, cleaning, and OTDR testing.
• Proven ability in RF Sweep and PIM measurements.
• Solid understanding of wireless networks, including modulation techniques (UTMS, GSM, LTE), amplifier/antenna/cable theory, link budgets, and propagation tools.
• Experience using RF test equipment (spectrum analyzers, sweep, and PIM gear).
• Technical Proficiency: Demonstrated ability to read and interpret construction blueprints and design drawings.
• Management Skills: Previous experience as a Field Supervisor, with a proven track record of managing and mentoring less experienced technicians.
• Software Skills: Proficiency in Microsoft Office, particularly Excel.

Additional Requirements:

• Travel: Ability to travel nationwide for project deployments lasting 4-6 weeks, with short breaks in between. Travel constitutes over 60% of the role.
• Driver’s License: Must possess a valid driver’s license.
• Physical Requirements:
• Ability to lift up to 80 lbs. unassisted.
• Repeatedly ascend and descend ladders (6ft-14ft).
• Work in tight, confined spaces, such as attics and drop ceilings.
• Walk continuously across the job site while carrying ladders, tools, and materials.
• Ability to work in varied conditions, both indoor and outdoor (hot and cold).
• Tools: Must provide basic hand tools.
• Compliance: Must pass a criminal background check, drug screening, and pre-employment physical.

Preferred Certifications (Training provided if needed):

• RF Awareness
• OSHA 10 or OSHA 30
• EXFO Splice/Test OTDR/iOLM
• Anritsu PIM & Sweep
• JMA (Connectors & TEKO DAS)
• Ericsson RDS Structured Cabling Installation
• SOLiD, Commscope – Ion-M, Ion-B, Ion-U, Ion-E
• Corning Mobile Access – CMA & SpiderCloud
• First Aid/CPR, UL Lockout/Tagout

What We Offer:

• Competitive Pay: $34.00 - $41.00 per hour.
• Comprehensive Benefits: Health insurance, paid holidays, paid vacation, life insurance, and paid training.
• Growth Opportunities: Company-paid professional development and certification programs to keep you ahead in the industry.
• Travel Perks: We provide transportation to and from project sites and per diem while working on-site.
• Tools Provided: All additional tools needed for the job are supplied by the company.

Ready to Lead?

If you’re a seasoned DAS Installer ready to take on leadership, we want to hear from you! Bring your expertise and drive to a team that values professionalism, integrity, and teamwork.

Job Type: Full-time

Benefits:

• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Paid training
• Professional development assistance
• Vision insurance

Education:

• High school or equivalent (Preferred)

Experience:

• In-building DAS: 3 years (Preferred)

License/Certification:

• Driver's License (Required)

Work Location: On the road

Position Description

Ryder is hiring a Mobile Maintenance Diesel Technician in Mobile, Alabama — offering weekly pay, excellent benefits, and a Technician career you can feel good about.

Hear it from a Ryder Technician Employee Here:

• 
  
• Mobile Technicians are issued a Ryder Mobile Maintenance Truck for Service Calls
  
  
• Hourly Pay: $32.00 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $1750 at 30 days and $1750 at 90 days
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: First Shift 7:00 am – 3:30 pm
  
  

We want the right Mobile Maintenance Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Dominique or text “Mobile MT3” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High School diploma or equivalent
  
  
• Vocational or Technical Certification in related field preferred
  
  
• Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Pass a Ryder drug test and previous employer's for the past 3 years, DOT physical, Ryder road test, pass a Ryder Background check and Motor vehicle check including Drug and Alcohol verification from previous employers for the last 3 years
  
  
• Able to take home assigned mobile service truck as applicable and secure vehicle and contents preferred
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to understand and adhere to Company policies in all areas
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Ability to complete repair orders with the Company established systems
  
  
• Demonstrates customer service skills. Strong relationship management skills
  
  
• Strong verbal and written communication skills
  
  
• Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Ability to work independently and as a member of a team
  
  
• Ability to prioritize workload
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Other Service Island support - SBTIII trained - SBT220 within 180 Days
  
  
• Other Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mix (predominant OEM of fleet mix) within 1 year
  
  
• Other Tire & Wheel safety - TW220 within 90 Days
  
  
• Other Preventive Maintenance: qualified - (PM230&PM298) within 90 Days
  
  
• Other Brakes-Air qualified - (BA220&BA298) within 90 Days
  
  
• Other Must meet qualifications of brake mechanic and inspectors (FMCS 396.25)
  
  
• Other Brake Hydraulic qualified - (BH220&BH298) where appropriate within 90 Days
  
  
• Other A/C recycling/recovery certified - CF609 within 90 Days
  
  
• Other A/C qualified - (AC220&AC298) within 180 Days
  
  
• Other HD electrical trained - DR208 within 90 Days
  
  
• Valid NonCommercial Driver License CLASS E, Commercial Driver License (CDL) CLASS A and/or State driver's license as required
  
  
• DOT Safety Regulated Position
  
  
• Safety Sensitive Position
  
  

Regulated Tech:

• 
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction. Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc.
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer
  
  
• Act as a mentor for the Mobile Technician II level
  
  
• Performs other duties as assigned
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 3 days ago (3/16/2026 5:33 PM)

Requisition ID 2

Location (Posting Location) : State/Province AL

Location (Posting Location) : City MOBILE

Location (Posting Location) : Postal Code 36618

Category Technicians/Service Employees8

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000127

Min Pay USD $32.00/Hr.

Max Pay USD $32.00/Hr.

Lead Security Technician

Location: Charleston, SC

Schedule: Full-time (typical construction hours; may vary by project)

Position Overview

We are seeking an experienced Lead Security Technician to support commercial security system installations across projects in the Charleston, SC area. This is a hands-on leadership role responsible for overseeing field crews, ensuring high-quality installations, and coordinating with project stakeholders to deliver successful security system deployments.

The ideal candidate brings strong experience in access control, CCTV, intrusion systems, door hardware, and structured cabling, along with the ability to lead teams and maintain professional jobsite standards.

Key Responsibilities

Field Leadership

• Lead and supervise installation teams on active job sites
• Assign daily tasks and ensure productivity and quality standards are met
• Serve as the primary point of contact between field teams and project leadership
• Maintain jobsite organization, safety compliance, and workflow efficiency

Security System Installation

• Install, terminate, and troubleshoot:
• Access control systems
• CCTV / IP camera systems
• Intrusion detection systems
• Install and wire door hardware including:
• Electric strikes
• Maglocks
• Door contacts
• Request-to-exit (REX) devices
• Card readers and keypads

Cabling & Infrastructure

• Pull, route, terminate, and test:
• Cat5e / Cat6 / Cat6A
• Composite access control cable
• Coax and low-voltage cabling
• Perform clean cable dressing, labeling, and pathway management
• Build and wire panels, enclosures, and head-end equipment

System Integration & Testing

• Assist with panel terminations and device integrations
• Support system testing, commissioning, and troubleshooting
• Ensure all installations meet project specifications and code requirements

Documentation & Communication

• Read and interpret blueprints, riser diagrams, and scopes of work
• Provide daily progress updates to project managers or supervisors
• Track materials, report issues, and coordinate solutions in real time

Required Experience

• 5+ years of experience in low-voltage / security system installation
• Proven leadership experience as a Lead Technician or Foreman
• Strong background in:
• Access control systems
• CCTV / surveillance systems
• Structured cabling and terminations
• Door hardware installation

Preferred System & Brand Experience

Experience with one or more of the following platforms is highly preferred:

• Access Control: Lenel, LenelS2, Software House (CCURE), Genetec, Avigilon, Brivo, AMAG, Honeywell, Openpath
• CCTV / VMS: Avigilon, Genetec, Milestone, Hanwha (Wisenet), Axis
• Intrusion Systems: Bosch, Honeywell, DSC, DMP

Technical Skills

• Strong understanding of low-voltage wiring and system architecture
• Experience with panel wiring and device integration
• Ability to troubleshoot systems independently
• Proficient in reading prints and executing scopes with precision

Requirements

• Valid driver’s license and reliable transportation
• Ability to pass background check (required for secured sites)
• OSHA 10 (preferred but not required)
• Ability to lift 50+ lbs, climb ladders, and work in construction environments

Tools & PPE

• Must have own basic hand tools (termination tools, drills, testers, etc.)

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a Industrial Maintenance Electrician you will be a vital part of our manufacturing team installing, maintaining electrical equipment. Operate, install electrical systems and preform functional of building and plant equipment.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Operate, install electrical systems and perform functional testing of building and plant equipment (e.g., machines, motor controls, room re-models)

• Determine if system should be shut down or work must be performed with power source on

• Lock out, tag out, try out equipment and related systems

• Perform primary and secondary testing on electrical breakers during routine maintenance; replace, update and retro fit breakers

• Perform routine tests on high voltage switches and relays, using hi-potential test equipment (Hipot), replace switch or relay

• Troubleshoot electric motors using appropriate test equipment

• Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system

• Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel

• Service and maintain electrical systems on various types of overhead cranes

• Operate, install electrical systems and perform functional test of building and plant equipment (e.g., machines, motor controls, room re-models)

• Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent, halide, standard); clean and check sockets, and replace ballast and bulbs

• Run high voltage electrical cable from sub-station to unit station; cut and splice cable, test cable for resistance

• Install, replace and repair fiber optic cable for computers and computing systems

• Bend conduit and install junction boxes; pull wire of various gauge and color through conduit using a fish tape; install and connect switches and outlets

• Check work after completion or after each operation; ensure job is per drawing and WAC, NEC codes; evaluate job for work to be performed (e.g., wire size, electrical load, conduit)

• Operate mechanical lifts of various types (e.g. tiger lift, spider lift, snorkel lift), to access work areas

• Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in plant electrical systems

• Establish/verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters)

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 3+ years of experience as an Electrician or Apprentice.

• 1+ years of experience maintaining industrial equipment.

• Experience working from heights and using fall protection equipment with weight limitations .

• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

• Must be able to complete fall protection training.

Preferred Qualifications:

• Electrician license (EL01 &/or EL 07) or an electrical card.

• Crane related experience.

• Experience with prime power.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidate must live in the immediate are or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $33.32 per hour – $61.01 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.