Cable Remote Codes Jobs Full Time Jobs in Usa

Are you an experienced leader in Distributed Antenna Systems (DAS) installation, ready to take on large-scale projects and mentor a team? As a Lead DAS Installer, you'll lead the charge in implementing wireless solutions for in-building distributed antenna systems. You’ll oversee a crew of 3-5 installers, ensuring the highest quality standards are met on every job site. This is a hands-on role, working closely with the Project Manager and installation teams to deliver seamless wireless coverage.

Your expertise will help guide the team in reading blueprints, installing DAS equipment, and configuring advanced systems. This is an exciting opportunity for a motivated leader who enjoys working in dynamic environments across the country.

Key Responsibilities:

• Lead Installation Crews: Oversee installation teams, providing guidance, training, and mentorship to 3-5 technicians throughout the project lifecycle.
• DAS Equipment Installation: Install outdoor and indoor antennas, coaxial cables, CATV, fiber optic cables, CAT 5/6, and DC power cables to NEC standards.
• Cabling & Testing: Perform advanced cable terminations, including coaxial (JMA, Andrews, Trilogy), fiber fusion splicing, OTDR testing, and coaxial PIM/Sweep testing.
• System Configuration & Integration: Configure and integrate DAS head-end systems such as Rectifiers, Battery Systems, VoltServer, Commscope iON-B and iON-U, JMA Teko, and Corning Mobile Access. Manage monitoring systems including T1, broadband backhaul, routers, and dry contact alarms.
• Project Reporting & Communication: Keep both the company and clients informed about project progress, safety standards, and local codes. Update and maintain project documentation, customer prints, and site reports.
• Site Surveys & RF Design: Conduct site surveys to troubleshoot and optimize RF/fiber optic installations, report findings, and design corrective solutions for inadequate coverage.
• Assist in Project Preparation: Help in proposal development, project scheduling, and materials/subcontractor selection processes.
• Warehouse Support: Assist with warehouse maintenance, inventory management, and ensuring adequate materials for upcoming projects.

Minimum Qualifications:

• Experience:
• A minimum of 5 years of in-building DAS installation experience.
• Extensive experience with cable installation in IT, RF, electrical, and/or telecommunications fields.
• Expertise in fiber fusion splicing, terminations, dressing, cleaning, and OTDR testing.
• Proven ability in RF Sweep and PIM measurements.
• Solid understanding of wireless networks, including modulation techniques (UTMS, GSM, LTE), amplifier/antenna/cable theory, link budgets, and propagation tools.
• Experience using RF test equipment (spectrum analyzers, sweep, and PIM gear).
• Technical Proficiency: Demonstrated ability to read and interpret construction blueprints and design drawings.
• Management Skills: Previous experience as a Field Supervisor, with a proven track record of managing and mentoring less experienced technicians.
• Software Skills: Proficiency in Microsoft Office, particularly Excel.

Additional Requirements:

• Travel: Ability to travel nationwide for project deployments lasting 4-6 weeks, with short breaks in between. Travel constitutes over 60% of the role.
• Driver’s License: Must possess a valid driver’s license.
• Physical Requirements:
• Ability to lift up to 80 lbs. unassisted.
• Repeatedly ascend and descend ladders (6ft-14ft).
• Work in tight, confined spaces, such as attics and drop ceilings.
• Walk continuously across the job site while carrying ladders, tools, and materials.
• Ability to work in varied conditions, both indoor and outdoor (hot and cold).
• Tools: Must provide basic hand tools.
• Compliance: Must pass a criminal background check, drug screening, and pre-employment physical.

Preferred Certifications (Training provided if needed):

• RF Awareness
• OSHA 10 or OSHA 30
• EXFO Splice/Test OTDR/iOLM
• Anritsu PIM & Sweep
• JMA (Connectors & TEKO DAS)
• Ericsson RDS Structured Cabling Installation
• SOLiD, Commscope – Ion-M, Ion-B, Ion-U, Ion-E
• Corning Mobile Access – CMA & SpiderCloud
• First Aid/CPR, UL Lockout/Tagout

What We Offer:

• Competitive Pay: $34.00 - $41.00 per hour.
• Comprehensive Benefits: Health insurance, paid holidays, paid vacation, life insurance, and paid training.
• Growth Opportunities: Company-paid professional development and certification programs to keep you ahead in the industry.
• Travel Perks: We provide transportation to and from project sites and per diem while working on-site.
• Tools Provided: All additional tools needed for the job are supplied by the company.

Ready to Lead?

If you’re a seasoned DAS Installer ready to take on leadership, we want to hear from you! Bring your expertise and drive to a team that values professionalism, integrity, and teamwork.

Job Type: Full-time

Benefits:

• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Paid training
• Professional development assistance
• Vision insurance

Education:

• High school or equivalent (Preferred)

Experience:

• In-building DAS: 3 years (Preferred)

License/Certification:

• Driver's License (Required)

Work Location: On the road

Position Description

Ryder is hiring a Mobile Maintenance Diesel Technician in Mobile, Alabama — offering weekly pay, excellent benefits, and a Technician career you can feel good about.

Hear it from a Ryder Technician Employee Here:

• 
  
• Mobile Technicians are issued a Ryder Mobile Maintenance Truck for Service Calls
  
  
• Hourly Pay: $34.00 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $1750 at 30 days and $1750 at 90 days
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: Second Shift 11:30 am – 8:00 pm
  
  

We want the right Mobile Maintenance Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Dominique or text “Mobile MT3” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High School diploma or equivalent
  
  
• Vocational or Technical Certification in related field preferred
  
  
• Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Pass a Ryder drug test and previous employer's for the past 3 years, DOT physical, Ryder road test, pass a Ryder Background check and Motor vehicle check including Drug and Alcohol verification from previous employers for the last 3 years
  
  
• Able to take home assigned mobile service truck as applicable and secure vehicle and contents preferred
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to understand and adhere to Company policies in all areas
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Ability to complete repair orders with the Company established systems
  
  
• Demonstrates customer service skills. Strong relationship management skills
  
  
• Strong verbal and written communication skills
  
  
• Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Ability to work independently and as a member of a team
  
  
• Ability to prioritize workload
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Other Service Island support - SBTIII trained - SBT220 within 180 Days
  
  
• Other Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mix (predominant OEM of fleet mix) within 1 year
  
  
• Other Tire & Wheel safety - TW220 within 90 Days
  
  
• Other Preventive Maintenance: qualified - (PM230&PM298) within 90 Days
  
  
• Other Brakes-Air qualified - (BA220&BA298) within 90 Days
  
  
• Other Must meet qualifications of brake mechanic and inspectors (FMCS 396.25)
  
  
• Other Brake Hydraulic qualified - (BH220&BH298) where appropriate within 90 Days
  
  
• Other A/C recycling/recovery certified - CF609 within 90 Days
  
  
• Other A/C qualified - (AC220&AC298) within 180 Days
  
  
• Other HD electrical trained - DR208 within 90 Days
  
  
• Valid NonCommercial Driver License CLASS E, Commercial Driver License (CDL) CLASS A and/or State driver's license as required
  
  
• DOT Safety Regulated Position
  
  
• Safety Sensitive Position
  
  

Regulated Tech:

• 
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction. Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc.
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer
  
  
• Act as a mentor for the Mobile Technician II level
  
  
• Performs other duties as assigned
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 4 days ago (3/16/2026 5:33 PM)

Requisition ID 2

Location (Posting Location) : State/Province AL

Location (Posting Location) : City MOBILE

Location (Posting Location) : Postal Code 36618

Category Technicians/Service Employees8

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000127

Min Pay USD $32.00/Hr.

Max Pay USD $32.00/Hr.

Lead Security Technician

Location: Charleston, SC

Schedule: Full-time (typical construction hours; may vary by project)

Position Overview

We are seeking an experienced Lead Security Technician to support commercial security system installations across projects in the Charleston, SC area. This is a hands-on leadership role responsible for overseeing field crews, ensuring high-quality installations, and coordinating with project stakeholders to deliver successful security system deployments.

The ideal candidate brings strong experience in access control, CCTV, intrusion systems, door hardware, and structured cabling, along with the ability to lead teams and maintain professional jobsite standards.

Key Responsibilities

Field Leadership

• Lead and supervise installation teams on active job sites
• Assign daily tasks and ensure productivity and quality standards are met
• Serve as the primary point of contact between field teams and project leadership
• Maintain jobsite organization, safety compliance, and workflow efficiency

Security System Installation

• Install, terminate, and troubleshoot:
• Access control systems
• CCTV / IP camera systems
• Intrusion detection systems
• Install and wire door hardware including:
• Electric strikes
• Maglocks
• Door contacts
• Request-to-exit (REX) devices
• Card readers and keypads

Cabling & Infrastructure

• Pull, route, terminate, and test:
• Cat5e / Cat6 / Cat6A
• Composite access control cable
• Coax and low-voltage cabling
• Perform clean cable dressing, labeling, and pathway management
• Build and wire panels, enclosures, and head-end equipment

System Integration & Testing

• Assist with panel terminations and device integrations
• Support system testing, commissioning, and troubleshooting
• Ensure all installations meet project specifications and code requirements

Documentation & Communication

• Read and interpret blueprints, riser diagrams, and scopes of work
• Provide daily progress updates to project managers or supervisors
• Track materials, report issues, and coordinate solutions in real time

Required Experience

• 5+ years of experience in low-voltage / security system installation
• Proven leadership experience as a Lead Technician or Foreman
• Strong background in:
• Access control systems
• CCTV / surveillance systems
• Structured cabling and terminations
• Door hardware installation

Preferred System & Brand Experience

Experience with one or more of the following platforms is highly preferred:

• Access Control: Lenel, LenelS2, Software House (CCURE), Genetec, Avigilon, Brivo, AMAG, Honeywell, Openpath
• CCTV / VMS: Avigilon, Genetec, Milestone, Hanwha (Wisenet), Axis
• Intrusion Systems: Bosch, Honeywell, DSC, DMP

Technical Skills

• Strong understanding of low-voltage wiring and system architecture
• Experience with panel wiring and device integration
• Ability to troubleshoot systems independently
• Proficient in reading prints and executing scopes with precision

Requirements

• Valid driver’s license and reliable transportation
• Ability to pass background check (required for secured sites)
• OSHA 10 (preferred but not required)
• Ability to lift 50+ lbs, climb ladders, and work in construction environments

Tools & PPE

• Must have own basic hand tools (termination tools, drills, testers, etc.)

Position Description

Torque by Ryder is immediately hiring a Permanent Full-Time Experienced Mobile Diesel Technician to support our Truck Fleet in Raleigh, North Carolina

Hear it from a Torque Mobile Mechanic Technician Here:

• 
  
• Technician Positions Pay Each Week
  
  
• Hourly Pay: $36.00 per hour based on experience
  
  
• Retention Bonus: $2000 paid every quarter within the first year.
  
  
• Schedule: Flexible 40-hour work week (weekend premiums apply)
  
  
• Fuel Card and Company Cell Phone provided
  
  
• For mobile technicians, work site service vehicle will be provided
  
  
• Grow with Ryder: This position provides additional training to level up.
  
  

We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks.

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Dominiqueor text “Raleigh Mobile” to 9 to speak with your recruiter today.

At Ryder, we offer outstanding benefits:

• 
  
• Generous Paid Time Off
  
  
• Medical, Dental and Vision Insurance effective 30 days from hire date
  
  
• Life Insurance and Disability Insurance Options
  
  
• 401K Savings Plan with Ryder matching contributions
  
  
• Discount on purchase of Ryder Common Stock
  
  
• Employee Discounts on Automotive, Mobile plans, Travel and Hotels
  
  
• Accredited Tech School Tuition Reimbursement
  
  
• PPE & Uniforms provided at no cost
  
  
• Paid Job training and development
  
  
• Employee & Customer Referral Bonus program
  
  

Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities

Click Here to See All Ryder Careers:

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Diagnostics and repairs, including AC, electrical systems
  
  
• Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs
  
  
• Four (4) years or more Relevant work experience, preferred
  
  
• NonCommercial Driver License CLASS E, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A, preferred
  
  
• Other State driver's license, as required
  
  
• Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to:
  
  
• Understand and adhere to Company policies in all areas
  
  
• Complete repair orders with the Company established systems
  
  
• Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Work independently and as a member of a team
  
  
• Prioritize workload
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Demonstrates customer service skills
  
  
• Strong verbal and written communication skills
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Preventive Maintenance (PM230&PM298) within 90 Days
  
  
• Brakes-Air (BA220&BA298) within 90 Days
  
  
• Brake mechanics/inspectors FMCS 396.25
  
  
• Hydraulic Brake (BH220&BH298) where appropriate within 90 Days
  
  
• Tire & Wheel TW220 within 90 Days
  
  
• CF609 & A/C trained and qualified (AC220&AC298) within 180 Days
  
  
• HD electrical - DR208 within 90 Days
  
  
• Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days
  
  
• Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix)
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair
  
  
• Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support
  
  
• Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable
  
  
• Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Instructs and advises other technicians regarding maintenance repair procedures and diagnostics
  
  
• Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction.
  
  
• Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Performs other duties as assigned.
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements.
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer.
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 3 days ago (3/17/2026 4:39 PM)

Requisition ID 2

Location (Posting Location) : State/Province NC

Location (Posting Location) : City RALEIGH

Location (Posting Location) : Postal Code 27616

Category Technicians/Service Employees9

Employment Type Regular-Full time

Travel Requirements Greater than 60%

Position Code 1001374

Min Pay USD $36.00/Hr.

Max Pay USD $36.00/Hr.

Job Overview 

Mondo Media Solutions (MMS) is seeking a highly skilled Audio Video Field Installation Engineer to join our team. We specialize in full-service installations of audio, video, Theatrical lighting, access control, and surveillance systems for commercial applications. Located in Philadelphia, PA, this role offers both full-time and contract opportunities. 

Responsibilities 

• Lead installations, maintenance, and troubleshooting of commercial audio/video systems, including conference rooms, access control, and security camera systems. 
• Install projection systems, wiring, termination A/V systems, loudspeakers, cameras, and displays. 
• Troubleshooting basic network routers and switches. 
• Engage in DSP programming, particularly with Q-SYS, 
• Install and Troubleshoot conference room setups and equipment. 
• Fabricate racks, pull and dress cables, and manage cable terminations. 
• Provide friendly customer service during installation and servicing tasks. 
• Updating onsite installation software throughout the day. 

Requirements 

• Minimum 5 years of experience as a commercial A/V installer. 
• Must be able to independently diagnose and repair onsite issues with networking, security cameras, distributed audio systems, and conference room systems.  
• Proficient in DSP programming, preferably with QSYS, Extron 
• Experienced in control systems, QSC QSYS systems, including coding and troubleshooting. 
• Familiar with using power tools like drills, saws, and rotary hammers.
• Obtain or pass OSHA 10 certification within 30 days and Obtain or pass OSHA 30 certification within 90 days  
• CTS certification within 90 days 
• Strong organizational skills, attention to detail, and the ability to manage multiple projects. 
• Excellent communication skills, both verbal and written. 
• Ability to safely lift up to 50 pounds work comfortably on ladders up to 12 feet, and lifts over 26 feet. 
• Proficiency in soldering and cable terminations, including XLR, TRS, RCA, and more. 
• Familiarity with Microsoft Office and various web-based portals. 
• Ability to fit into tight spaces and quickly learn new computer programs. 

Compensation & Benefits 

• Medical and Dental Benefits
• 401K 
• Company Vehicle Use 

Additional Information 

• Candidates must be detailed, organized, and have a proven track record of reliability. 
• Committed to the company's Mission, Vision, and Values. 
• Ability to identify and handle various cable types and connectors. 
• Experience with basic and advanced hand tools is essential. 

About Mondo Media Solutions 

Mondo Media Solutions specializes in custom audiovisual, IT, and security systems for businesses, schools, and government. From boardrooms and auditoriums to digital signage, we deliver reliable, scalable technology solutions with a commitment to integrity and customer satisfaction. 

Job Title: Telecommunications Designer/RCDD

Work Location: St. Louis, MO/ Seattle, WA

Job Type: Full-time I On-Site

Role Summary

The Telecommunications Designer / RCDD is responsible for estimating, designing, and managing the installation of large low-voltage systems for commercial projects. This includes structured cabling, fiber optics, access control, and video surveillance. The role requires hands-on experience in low-voltage system design, accurate material and labor estimation, project coordination, and ensuring compliance with industry and building standards. The position blends technical expertise with project management, communication, and vendor coordination.

Duties & Responsibilities

• Perform site surveys to understand project sites and customer solutions.
• Develop accurate bill of materials and obtain pricing to provide cabling solutions.
• Acquire project documents, perform take-offs, review specifications, and estimate materials and labor accurately.
• Price materials with vendors, secure pricing from sub-contractors when applicable, and prepare a complete estimate and scope of work using company software.
• Prepare and type detailed cost proposals with scope of work.
• Manage awarded projects and coordinate with project foremen throughout installation.
• Prepare and submit post-installation as-builts and submittals.

Qualifications

• Must have 5+ years’ experience estimating large low-voltage systems including structured cabling, fiber optics, access control, and video surveillance.
• Must have RCDD or equivalent accreditation or experience.
• Solid knowledge of building codes, electrical codes, communication standards, and installation best practices.
• Ability to read blueprints, notes, and specifications.
• Excellent written and verbal communication skills.
• Strong computer skills in AutoCAD, Word, Excel, Outlook, and Visio.

Benefits:

• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Retirement plan

Position summary:

Install, maintain, and repair electrical systems, apparatus, and electrical equipment, wiring and fixtures, and electronic components of industrial machinery and equipment following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment.

Tasks:

• Install power supply wiring and conduit for newly installed machines and equipment following electrical code and blueprints, using hand tools and voltage tester.
• Install ground leads and connect power cables and wires to machines and equipment, following manuals, schematic diagrams, blueprints, using hand tools and test equipment.
• Diagnoses malfunctioning apparatus, such as transformers, motors, and fixtures using test equipment.
• Repair or replace faulty electric components, wiring, equipment, and fixtures, using hand tools and power tools.
• Test malfunctioning or broken equipment using test equipment, and discuss malfunction with other workers to diagnose malfunction.
• Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Place conduit, pipes or tubing, inside designated partitions, walls, structures or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
• Connect wires to circuit breakers, transformers, or other components.
• Install ground leads and connect power cables to equipment, such as motors.

Skills:

• Installation - Installing equipment, machines, wiring, or programs to meet specifications.
• Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
• Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Repairing - Repairing machines or systems using the needed tools.

Attributes:

• Follow the rules of safe conduct at all times.
• Demonstrate ability to effectively utilize materials/resources in cost-effective manner.
• Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
• Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
• Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
• Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
• Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
• Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

Knowledge Requirements:

• Post-Secondary Certificate desirable- awarded for training completed after high school. Minimum 5 years in craft, including helper and apprentice roles. Minimum 2 years as journeyman working in industrial environment
• READING: The employee must have the ability to read safety requirements, instructions in the correct use and maintenance of shop tools, be able to read and understand methods and procedures that are present on drawings, layout work, and just specifications.
• WRITING: Must have the ability to write simple reports with the correct format using spelling and grammar. (English
• SPEAKING: Must have the ability to speak using correct English with a well modulated voice.
• The minimum math ability usually associated with this classification is the ability to calculate surface areas, translate these figures into a bill of material which can be used to complete a specific job. Employees must be able to use variable and formulas which are normally found in most industry approved trade hand books. Also, employees must be familiar with the O.S.H.A. requirements for the type work that is being performed.

The employee must understand that the reporting system used for problems and information is as follows: 1) Crewleader, 2) Foreman, 3) General Foreman, and 4) Superintendent.

Physical Requirements:

• Positions require working in: climbing, bending, sitting, walking, kneeling, crawling, standing, lifting, pushing, and pulling.
• Good hand eye balance and the ability to distinguish colors are required in order to use the tools that are necessary to perform the required work.
• Employees must have vision which has good depth perception in order to judge distance and space relationships.
• The employee must be able to work in all types of weather conditions.
• The ability to work in elevated positions is a must.
• The employee must be able to work in confined spaces as well as wear the following safety equipment when need be: life vests, ear protection, rubber gloves, leather gloves, hard hat, slicker suit, acid suit, rubber gloves, full face breathing mask, wearing full safety harness, or wearing a face shield.
• The heavy work will require the employee to exert up to 100 pounds of force occasionally: The medium work will require the exerting of 50 pounds of frequently: The remainder of the work should require the exertion of 20 pounds of force to constantly move an object.

Other Requirements:

The employee must have a telephone. The employee is expected to work overtime in order to maintain the plant in a safe and productive state. The employee is expected to make call outs when such work is available and the employee’s services are needed.

The employee must have a valid Texas Driver’s License and have permission prior to operating any TIG vehicle. The requirements for operating a company vehicle are as follows: In the past three (3) years the employee can have had only 4 moving violations, no more than 2 chargeable accidents, and no D.W.I.

NOTICE: THIS JOB DESCRIPTION IN NO WAY STATES OR IMPLIES THAT THESE ARE THE ONLY DUTIES TO BE PREFORMED BY THIS EMPLOYEE. HE OR SHE WILL BE REQUIRED TO FOLLOW ANY OTHER INSTRUCTIONS AND TO PERFORM ANY OTHER DUTIES REQUESTED BY HIS OR HER SUPERVISOR.

Job Type: Full-time

Structured Cabling Project Manager – construction

Dallas, TX | Full-Time | On-site

Seeking an experienced Project Manager – Construction to lead the planning and execution of construction projects. This is a high-impact leadership role responsible for driving project success from RFP through commissioning and closeout.

If you thrive in fast-paced environments, know how to manage complex builds, and have strong Structured Cabling and BICSI Standards knowledge, — we want to hear from you.

Position Summary

As a Project Manager, you will provide overall leadership and drive success across multiple facets of construction projects. This position covers all aspects of construction, requiring a high level of autonomy, independent discretion, and project execution expertise.

Key Responsibilities

• Lead RFP development, estimating, and budgeting
• Oversee pre-bid coordination and procurement planning
• Manage all design phases and construction documents
• Conduct project meetings, distribute minutes, and maintain milestone reporting
• Manage daily field and office operations
• Review plans/specs for constructability, schedule, and risk mitigation
• Develop and maintain detailed project schedules (including long-lead procurement items)
• Engage with customers to ensure fulfillment of requirements
• Coordinate and supervise design-build contractors
• Collaborate with internal stakeholders and subject matter experts
• Oversee physical construction activities and support project execution
• Participate in commissioning activities
• Manage project closeout and turnover of documentation to the customer
• Submit monthly financial reporting including forecasting and cash flow
• Review contractor billing and validate progress through job walks
• Keep all project stakeholders informed throughout the project lifecycle
• Support contract negotiation and vendor management
• Oversee the RFI, submittal, and change order process
• Ensure all work meets engineering standards, customer requirements, codes, and specifications
• Drive lessons learned, process improvements, cost savings, and schedule optimization
• Maintain strong awareness of mission-critical facility operations
• Enforce safety standards and jobsite compliance (OSHA knowledge required)

Schedule shifts may include nights/weekends based on project needs

Qualifications

Required

• 3-5 years of experience managing construction projects
• Strong ability to manage multiple stakeholders, contractors, and schedules
• Strong understanding of construction budgets, procurement, and scheduling

Preferred

• OSHA 30-hour certification preferred

Technical Skills

• Proficient in Microsoft Office (Excel, Word, Outlook, Teams)

Leadership Responsibilities

This role may supervise Superintendents, Project Coordinators, Assistant Project Managers, Project Managers, or a combination of related roles.

Physical Requirements

Ability to perform jobsite responsibilities including walking active construction sites, standing for extended periods, and occasionally lifting 10–50 pounds.

Equal Opportunity Employer

We are an equal opportunity employer and consider all applicants without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability status.

Company Description

Established in 1984, ASE Telecom & Data specializes in the design, installation, certification, and documentation of Premise and Outside Plant (OSP) Cabling & Physical Security Systems. With expertise in both copper and optical fiber media, ASE serves the expanding Local Area Network (LAN) and Wide Area Network (WAN) markets. The company provides services to state, county, and local government agencies, educational institutions, and private sector clients across Florida. Committed to delivering high-quality solutions, ASE has built a strong reputation for reliability and excellence.

Role Description

This is a full-time, on-site role located in Miami, FL, for a Security Project Manager. The role involves managing multiple security projects, Access Control & CCTV Systems, managing inspections & code compliance, and ensuring compliance with information security protocols. Responsibilities include coordinating with stakeholders, implementing security measures, and ensuring successful execution of projects within scope, budget, and timelines.

Qualifications

• Proficiency in Program Management, with the ability to lead and execute projects effectively.
• Strong knowledge of Florida Life Safety Codes, Security standards and Information Security concepts and practices.
• Experience with Network Security and Security Management, inclusive of monitoring and maintaining secure environments.
• Skills in risk assessment, incident management, and strategic planning related to security.
• Exceptional organizational, communication, and leadership abilities.
• Bachelor’s degree in Information Technology, Computer Science, or a related field experience or relevant certifications.
• Prior experience managing security projects in the technology, telecommunications, or government sectors is highly desirable.

Job Title: Electrical Superintendent – Commercial Construction

Location: Fort Myers/Cape Coral area

Overview

We are seeking an experienced Electrical Superintendent to oversee the planning, coordination, and installation of electrical systems on new and existing commercial construction projects. This role is responsible for ensuring work is executed safely, efficiently, and in full compliance with contract documents, codes, and company standards. The ideal candidate is a strong field leader with deep electrical expertise, sound judgment, and the ability to manage crews and jobsite operations effectively.

Key Responsibilities

The Electrical Superintendent plans and assigns daily work activities based on workforce capabilities and project needs. This position orders materials and tools, schedules major deliveries, and attends jobsite meetings to coordinate with project stakeholders. The superintendent supervises electrical installations to verify compliance with drawings, specifications, and applicable codes.

Responsibilities also include calling for inspections, accompanying inspectors during walkthroughs, and documenting any violations or deficiencies. The superintendent notifies the general contractor or appropriate administrators of any code violations, omissions, conflicts, or deviations identified in the installation documents.

This role enforces all company safety programs, including safety, drug-free workplace, and hazardous communication requirements. The Electrical Superintendent works closely with manufacturers, owner representatives, and owners to ensure proper installation and system performance. Understanding employee strengths and placing individuals in the most appropriate tasks is a key part of this role.

Qualifications

Candidates must possess a Journeyman or Master Electrician license and have completed a minimum of four years of formal training through an approved apprenticeship program. A minimum of eight years of field experience in commercial electrical construction is required, along with prior supervisory experience.

Required certifications include OSHA 10-hour training, First Aid and CPR, and Hilti or Cadweld certification. Candidates must have strong leadership and interpersonal skills, with the ability to work effectively across all trades and levels within a jobsite environment.

Applicants must be knowledgeable in the operation of electrical tools and equipment, including conduit benders, lifts, cable tuggers, KO sets, trenchers, backhoes, cranes, generators, and related equipment. The ability to read and interpret drawings, specifications, wiring diagrams, and contract documents is essential. Candidates must also be able to identify potential price changes, produce clear sketches, and communicate technical information effectively to field personnel. A valid driver’s license is required.

Education and Experience

A minimum of four years of experience working on commercial electrical projects is required, along with demonstrated supervisory experience.

Skills and Abilities

The Electrical Superintendent must demonstrate strong organizational skills, be self-motivated, and capable of managing multiple responsibilities in a fast-paced environment. Basic mathematical skills and sound reasoning abilities are required to support daily decision-making and problem-solving.

Physical Requirements

This position requires the ability to work in active construction environments, including climbing ladders and scaffolding, working at heights, lifting and carrying up to 50 pounds, bending, crouching, crawling, and working overhead for extended periods. Normal vision and hearing are required, with or without corrective devices.

Work Environment

The role is performed in active construction jobsite environments that may include noise, debris, uneven surfaces, and potential safety hazards such as trenches and openings. Employees must remain alert and adhere to all safety protocols at all times.

Equal Employment Opportunity

Meisner Electric, Inc. is an Equal Opportunity Employer and a Drug-Free Workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability, veteran status, or any other protected characteristic

Seniority Level

Mid-Senior level

Industry

Construction

Employment Type

Full-time

Job Functions

ManagementStrategy/PlanningProject Management

Skills

TrainingConstructionCommercial ConstructionSupervisory SkillsMechanical, Electrical, and Plumbing (MEP)Problem SolvingOSHA ComplianceElectrical Conduits