Assembly Label Jobs in Usa
2,424 positions found — Page 10
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Basic Job Functions: SUMMARY: The Order Fulfillment Specialist is responsible for assembling kits as needed and preparing parts for shipment utilizing UPS and FedEx systems.
Duties include preparing and crating orders by processing requests according to the bill of materials; pulling parts; preparing parts for shipment or assembly kits; verify accuracy of order; and complete associated electronic transactions in warehouse management system prior to parts leaving the area.
ESSENTIAL FUNCTIONS: Read and follow computerized instructions for pick and packing work order items.
Gather parts for shipment ensuring the type and quantity of parts match the order, inspect product and remove defective parts, record and document parts for shipment, package parts according to the order, utilize small package shipment systems as provided by carriers to create tracking labels, create supporting shipping documentation, move order to delivery area.
Continually checking for completeness of work order requirements and components.
Organize and restock all products as needed on shelves in the UPS area.
Maintain an adequate inventory of stock items and communicate shortages to Shop Supervisor.
Assist with physical inventory on a regular basis.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Minimum Qualifications: Ability to work the 1st shift schedule of 6:00am
- 2:30pm Monday
- Friday.
Excellent oral and written communication skills in order to interact with employees.
Ability to read and interpret work instructions.
Ability to lift 50
- 75 pounds frequently.
Ability to squat, kneel and stand frequently.
High attention to detail and excellent organizational skills.
Ability to be trainiend on and use nail and staple guns.
Ability to be trained on pallet jacks and forklift for material handling purposes.
Ability to read and comprehend simple instructions, short correspondence, and memos.
Ability to write simple correspondence.
Ability to effectively present information in one-on-one and small group situations to customers and/or other employees of the organization.
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent.
Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.
Ability to deal with problems involving a few concrete variables in standardized situations.
Preferred Qualifications: Experience with UPS, UPS world ship, FedEx and shipment of hazardous materials is highly desired.
Working knowledge of SAP preferred.
High school diploma or general education degree (GED) desired; one to three months related experience and/or training; or equivalent combination of education and experience.
Previous experience with pallet jacks and forklift for material handling purposes is a huge plus.
Experience with staple and nail guns and other hand and power tools.
Will implement appropriate actions as assigned to provide support and comfort to the patient’s needs, observes the patient and communicates pertinent data to the RN.
Performs technical patient care services under supervision of nursing leadership and a RN or the Charge RN.
Principle Duties And Responsibilities: Assists physicians and RN with endoscopic procedures.
Assists with pre/ intra / post endoscopic care of the patient including monitoring vital signs as necessary and as directed by the RN.
Makes beds, cleans rooms, and serves as a runner for equipment during procedures and for transport of patients as necessary.
Properly positions patient pre and intra procedure.
Selects correct Endo Product and performs quality control check preprocedural to include air, water and white balancing.
Enters patient and procedure information into endoscopy report writing software preprocedural and intra procedure as necessary.
Handles and manages procedure accessory equipment to include, but not limited to endoscopic forceps, polyp snares, endoscopic clips, retrieval nets/ graspers, heater probes and specimen collection containers.
Supports airway via head positioning and performs oropharyngeal suctioning.
Provides abdominal pressure as guided by provider.
Collects specimen and labels specimens with accuracy.
Performs immediate post procedure endoProduct precleaning.
Knows how to set up for, assemble / disassemble accessories for numerous technical procedures.
Troubleshoots problems with Endo Products and necessary support equipment including suction, CO2 pumps and water pumps.
Assembles and disassembles endoscopic instruments, accessories and related equipment.
Cleans and processes equipment after procedures, including testing for leaks and other troubleshooting.
Performs high level disinfection of Endo Products and accessories.
Assists with other duties or projects as assigned.
Education: High School graduate or G.E.D.
equivalent.
Preferred Education: Graduation from an Accredited (CAAHEP/ABHES) Medical Assistant Program, Surgical Technician, or Emergency Medical Tech training, preferred.
Required Certification & Licensure: BLS.
Schedule Notes: Candidate should have experience with procedure room and Product.
Logistics at full potential.
At GXO, we're constantly looking for talented individuals at all levels who can deliver the caliber of service our company requires. You know that a positive work environment creates happy employees, which boosts productivity and dedication. On our team, you'll have the support to excel at work and the resources to build a career you can be proud of.
Day Shift: Monday - Friday, 7:30am - 4:00pm
We believe providing superior support and solutions for our customers drives our success, and we want to put you behind the wheel. As the Data Center Logistics Associate position offers an opportunity to play a critical role in the seamless operation of our data center. This position is vital to ensuring efficient data center operation and requires a candidate who excels in managing inventory, coordinating shipments, and maintaining a clean and organized workspace. If you're looking for an exciting opportunity with a company that is clearly going places, join us at GXO.
What you'll do on a typical day:
- Inventory Management
- Receive, inspect, and accurately record all incoming inventory, including racks & trays, networking equipment, and other hardware
- Maintain accurate inventory records and ensure proper documentation for all items received and shipped
- Perform regular stock counts and reconcile discrepancies
- Shipping and Receiving
- Coordinate with suppliers and carriers to schedule inbound and outbound shipments
- Prepare shipping documents, labels, and packaging for outgoing shipments
- Upload, unpack, and inspect incoming shipments for accuracy and completeness
- Transport inventory by hand using material handling equipment (i.e. pallet jacks) in accordance with all safety procedures and protocol
- Facility Maintenance
- Maintain a clean and organized work environment, including storage areas and shipping/receiving docks
- Assist with the disposal of packaging materials and obsolete equipment as needed
- Compliance and Safety
- Adhere to all safety protocols and procedures to ensure a secure working environment.
- Compile with Data Center security measures and access controls
- Support and Collaboration
- Collaborate with cross-functional teams, including data center operations, procurement, and technical support, to fulfill inventory and logistics needs
- Provide support for special projects or initiatives as directed by management
- Complete other duties that may be assigned as required with consideration for quality, safety and efficiency
- Assembly
- Assist in the setup and installation of computer server racks according to provided instructions
- Help in the assembly of server racks by following diagrams and guidelines provided by senior team members
- Handle basic tools and equipment safely and effectively to complete installation tasks.
- Support senior technicians in cable management and organization within the server racks
What you need to succeed at GXO:
- To be at least 18 years of age
- High school diploma or equivalent
- 1 year of experience in logistics, inventory management, or related fields
- Familiarity with inventory management systems and software, as well as proficiency in using basic office software (e.g., Microsoft Excel, Word)
- The ability to do basic math calculations, with and without a calculator
- Ability to read and interpret documents such as safety rules, operating instructions, and procedural documents
- Familiarity with proper lifting techniques and the use of material handling equipment such as forklifts pallet jacks
It'd be great if you also have:
- Additional education or certification in logistics, supply chain management, or a related field
- Strong attention to detail, organizational skills, and the ability to multitask in a fast-paced environment
- Excellent communication, collaboration, and interpersonal skills, with the ability to work effectively and safely in a team setting
- Ensure a positive, respectful, and professional attitude if everything you do
- Availability to work a flexible schedule, including possible overtime when needed
This job requires the ability to:
- Ability to lift and move heavy material and perform physical tasks related to handling server trays and server racks
- Use power equipment to assist the team with safely moving very heavy server racks into position in accordance with established protocols and safety guidelines
We engineer faster, smarter, leaner supply chains.
GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team energetic, innovative people of all experience levels and talents who make GXO a great place to work.
We are proud to be an Equal Opportunity employer including Disabled/Veterans.
GXO adheres to CDC, OSHA and state and local requirements regarding COVID safety. All employees and visitors are expected to comply with GXO policies which are in place to safeguard our employees and customers.
All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test.
Review GXO's candidate privacy statement here.
What Makes a Honda, is Who makes a Honda
Honda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”
We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.
If your goals and values align with Honda’s, we want you to join our team to Bring the Future!
About this Position:
The Supplier Process Sr. Engineer position supports supplier delivery and characteristic improvement activity with automotive part suppliers in North America. Responsible for evaluating negative delivery, production, inventory management, plant/equipment, sub-supplier management, packaging control and/or workforce trends within the supply base; and developing and implementing systemic countermeasures to ensure acceptable delivery characteristics for Honda products and parts. This includes cross-functional collaboration in areas within Supply Chain Management, as well as New Model, Procurement, and Supplier Assurance to drive supplier characteristic improvement.
Responsibilities include:
- Support supplier improvement activity as part of Department Business plan, reporting performance measurables and targets, forecast impact, monitor results & develop gap elimination plans to achieve Department goals
- Identifies problems on a systemic level and conducts problem analysis / situation appraisal, which may include analysis on a specific part or assembly process (Tooling / Equipment Spec / Part Drawing Spec or Evaluation / OEE / Volume Assessment, etc.) to develop effective countermeasures to correct problems or potential problems to avoid impacting delivery performance
- Perform in-depth analysis related to the supplier’s production planning, results and/or current business practices and correlation to Honda systems/requirements (example CMS) and propose improvement options
- Champion engagement strategies for suppliers that are causing impact/risk to Honda. Performing deep root cause analysis through individual supplier Situational Analysis, engage with supplier top management, and work collaboratively to understand supplier SA and develop an overall activity SAP.
- Coordinate activity with concerned suppliers to understand current progress to overall SAP. Monitor, report on, and escalate suppliers that are not capable of meeting project milestones within the timeframe established.
- Evaluate NARS reports (A-Rank, mislabel, etc) and applicable parts and identify actual and potential problems, clarify and review with applicable departments, implement countermeasures to avoid problem occurrence from production planning through delivery
- As needed, serve as the subject matter expert to support and/or train Delivery associates in performing deep root cause analysis through data analysis, and work collaboratively to understand supplier situation analysis
- Collaborate in supplier selection activity with cross-functional areas to confirm and improve actual supplier capability
- Provide support after initial supplier crisis activity, as needed, to ensure supplier operational stability, efficiency, and characteristic improvement
- Complete reporting and Gemba activity for root cause analysis/countermeasure implementation to solve complex problems with/ attention to closure speed and effectiveness. Engage in continuous improvement through cycling Plan Do Check Action (PDCA).
Who we are seeking:
Required Work Experience:
- 2-8 years of relevant experience
Required Education:
- BS in Engineering or equivalent relevant experience
Desired skills:
- General knowledge of manufacturing environment and engineering principles as it relates to safety, quality, cost, delivery, new model, and manpower
- Delivery specific knowledge of production planning, efficiency/OEE, labelling, inventory management, plant/equipment, sub-supplier management, process control
- Manufacturing process knowledge (stamping, welding, assembly, material flow, electronics, injection molding, paint, casting, machining, etc.)
- Honda systems knowledge (NARS, CMS, GPCS, APS, NAPS, QMF, CPCS)
- Strong interpersonal skills, high-impact communication skills, project management skills, and Microsoft Office
- Ability to present to varying audiences including top management, conduct in-depth technical analysis, lead, and prioritize multiple projects, work in a team environment as well as independently
- Approve or provide guidance to identify corrective actions that eliminate defect reoccurrence (Problem Solving / PDCA)
- Understand NA Supplier SDM
- Manage multiple projects and activities at the same time (MDSR, Red Card/6 Step, LPF, OEE analysis and improvement, Workforce Stability engagement, etc.)
- Ability to balance workload and set priorities
- Result Orientation
- Make sound decisions with limited direction
Additional Position Factors:
- Hybrid workstyle (80% in office/20% remote)
- ~5-10 hrs. OT/ week
- ~50% travel
- Open office environment
What differentiates Honda and make us an employer of choice?
Total Rewards:
- Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)
- Paid Overtime
- Regional Bonus (when applicable)
- Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)
- Paid time off, including vacation, holidays, shutdown
- Company Paid Short-Term and Long-Term Disability
- 401K Plan with company match + additional contribution
- Relocation assistance (if eligible)
Career Growth:
- Advancement Opportunities
- Career Mobility
- Education Reimbursement for Continued Learning
- Training and Development programs
Additional Offerings:
- Tuition Assistance & Student Loan Repayment
- Lifestyle Account
- Childcare Reimbursement Account
- Elder Care Support
- Wellbeing Program
- Community Service and Engagement Programs
- Product Programs
Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.
Job Description
Job Summary:
Manages a team of chemists/scientists/technicians and executes pressure sensitive adhesive (PSA) tape prototype development, scale-up, and product launch in various applications. The group leader will focus on platform technology development, new product development for customer-driven projects, as well as continuous improvement and cost reduction of existing products and processes. Emphasis on acrylic polymer synthesis, silicone and rubber adhesive formulations, PSA rheology, knowledge of tape assemblies, backing material selection, and release liner familiarity. Works with customers and AR teams to collect design input and develop new product design strategies. Technical and laboratory lead in developing new adhesive solutions, robust products, and basic production processes that can be successfully commercialized.
Essential Functions:
- Establishes and directs research programs for new product development and product/process improvement of current products. Responsible for complex basic research and/or product development projects.
- Leads lab personnel and facilitates development of product constructions and processes; designs & conducts chemical experiments on both lab- and production-scale; designs and specifies production scale processes and contributes to product validation.
- Conducts and directs required laboratory work to develop new PSA and tape assemblies including polymerization, formulation, coating and testing. Develops new products that lead to sustainable commercial revenue.
- Completes any necessary regulatory forms. Ensures team follows similar protocols and procedures.
- Implements and executes product development to align with Stage Gate timelines and sets prioritization with the Director of Innovation and Product Management team. Meets technical commitments in order to complete project progression dates and milestones on time.
- Drives patent strategy (reading, planning, and execution) within the team to align with goals established by the Director of Innovation.
- Consults with Director of Innovation, Product Management, Operations, Quality and Sales personnel on group priorities and strategy. Active role in setting overall Innovation direction & strategy. Participates in business planning process with one or more business as appropriate. Establishes program priorities, objectives and responsibilities for group. Ensures effective communication of Innovation program progress for own work and for overall group.
- Functions as a technical lead on product development teams. Leads cross-functional product development teams to ensure effective prototype development, to drive prototypes to commercial products, and to translate findings into impactful business revenue.
- Participates and occasionally leads establishment and implementation of R&D policies and procedures. May be responsible for specified lab areas.
- Interfaces with customers on new product applications and networks externally to assure highest level of competence is maintained.
- Develops skills within the team and evaluates performance of department personnel. Mentors and and coaches associates to effectively work in the department in addition to promoting a collaborative work environment (within the department and cross-functionally). Executes performance reviews annually.
- Makes identifiable and substantial contributions to continuous improvement. Performs all duties consistent with established AR guidelines consistent with ISO-9001 and those elements of GMP deemed necessary to support our business (as outlined in the Quality Manual). Actively complies with and endorses Department and Company objectives.
- Responsible for the proper disposal of hazardous waste into the proper labeled containers and drums.
Additional Responsibilities:
- Perform other related duties as assigned by management.
Job Specifications:
- BS degree (or higher) in chemistry, chemical engineering, polymer science or materials science and/or significant industrial experience. Ph.D. degree preferred but not required.
- Greater than 3 years adhesive formulation, mixing process and coating process experience. Demonstrates detailed knowledge of required chemical and physical test methods for PSA characterization. Requires an aptitude to use sensitive test equipment.
- Basic understanding and familiarity with adhesive chemistries and coating technologies. Familiarity and understanding of various adhesive chemistries (acrylic, silicone, rubber).
- Understanding of adhesive tape constructions (backing materials, release liner selection, adhesive chemistries, etc.)
- Knowledge of PSA rheology, dynamic mechanical analysis, and other physical polymer characterization methods
- Supervisory experience preferred with experience managing a team of scientists in product development, technology platform expansion, and patent filing.
- Demonstrated technology and/or product development capability.
- Expertise required in Stage Gate processes and how to move projects through the pipeline with discipline, efficiency, and accountability
- Excellent program prioritization and coordination skills, ability to manage multiple priorities
- Ability and willingness to work effectively in a diverse, disciplined team environment with limited supervision. Ability to work independently and drive project execution with limited guidance.
- Excellent program prioritization and coordination skills, ability to manage multiple priorities.Agility to adapt and shift to changing priorities, proactively anticipating obstacles, and flexibility to seek out alternative solutions when faced with meeting customer design inputs and timelines
- Must communicate fluently in English
- Ability to maintain confidentiality of AR information
- Excellent oral & written communication skills
- Excellent interpersonal skills
- Knowledge of computers & related word processing, spreadsheet & e-mail software – Microsoft preferred
- Ability to employ statistical analysis techniques. Familiarity with design of experiments software and set-up, ability to employ statistical analysis techniques
- Ability to develop and present effective technical presentations to internal and external customers.
- Pay Rate: $20/hr
- Hours: 6am-2:30pm Mon-Fri
- TEMP role 2-8 weeks in duration
Executes a variety of tasks that includes receipt and verification of materials, calibration and operation of equipment, dispensing or packaging dry and/ or wet products, capping and torquing of bottles, assembly of components and kits, performing calculations, and completing required documentation following Good Documentation Practices.
- Packages finished products
- Calibrates/ operates equipment
- Codes and applies labels
- Seals bags and pouches
- Dispenses solutions
- Assembles components and kits
- Fill out required documentation (work orders, procedures, logs)
- Special assignments may include processing rework, scrap and waste disposal, other duties as assigned.
- Follow guidelines with use of personal
- Protective equipment including use of hood with assisted breathing air
- High school diploma or equivalent 2+ years related experience or equivalent combination of education and experience.
- Ability to follow comprehensive written instructions, to work independently as well as in a team environment, and to perform basic math including use of fractions and decimals where applicable.
- Basic computer skills in applicable programs.
- Knowledge of all safety policies and procedures and handling of goods and/ or hazardous materials.
- May be required to wear personal protective equipment which includes a hood with assisted breathing air.
- Ability to lift at least 15 lbs and use equipment such as pallet jacks and lift assist equipment for heavier materials.
- This is a unique opportunity to support our client; one of the world's largest biotechnology companies. Medical benefits and 401K are available.
Yoh makes finding and applying for jobs simple. Partner with Yoh Staffing to find the right opportunities across multiple industries in the US and UK. Find out more here!
Recruiter: Lisa Hughes
Estimated Min Rate: $20.00
Estimated Max Rate: $20.00
What’s In It for You?
We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include:
- Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week)
- Health Savings Account (HSA) (for employees working 20+ hours per week)
- Life & Disability Insurance (for employees working 20+ hours per week)
- MetLife Voluntary Benefits
- Employee Assistance Program (EAP)
- 401K Retirement Savings Plan
- Direct Deposit & weekly epayroll
- Referral Bonus Programs
- Certification and training opportunities
Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply.
Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Visit to contact us if you are an individual with a disability and require accommodation in the application process.
For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment.
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh’s hiring clients’ preferences. To learn more about Yoh’s privacy practices, please see our Candidate Privacy Notice:
Company Description
Job Description
ABOUT THE JOB
This job is for people who can multi task and thrive in a fast paced environment. Our goal is to get every pizza to our customers as fast as safely possible by operating efficiently in the store and we need more great team members to accomplish this. We are looking for highly motivated applicants who rise to the occasion when business demands. A competitive nature is a must. We are searching for qualified delivery experts with personality, people skills, and a desire to serve. You must have a reliable vehicle, proof of insurance, valid driver's license, and a safe driving record.
We are very flexible with hours and can accommodate a schedule that requires only 1 shift per week or as many as 5-6 shifts per week. Both daytime and evening shifts are available.
ADVANCEMENT
Many of our team members began their careers as delivery drivers or customer service representatives and today are successful Domino's franchise owners. From customer service representative to management, General Manager to Manager of Corporate Operations or Franchisee, our stores offer a world of opportunity.
DIVERSITY
Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential.
SUMMARY STATEMENT
We take pride in our team members and our team members take pride in Domino's Pizza! Being the best pizza delivery company in the world and in every neighborhood requires exceptional team members working together. At Domino's Pizza, our people come first!
JOB REQUIREMENTS
You must be 18 years of age or older
General job duties for all store team members
* Operate all equipment
* Stock ingredients from delivery area to storage, work area, and walk-in cooler
* Prepare product
* Receive and process telephone orders
* Complete any required paperwork
* Clean equipment and facility daily
* Maintain store equipment
* Read a map and navigate to designated locations
* Locate addresses and deliver across adverse terrain while carrying product
* Use personal vehicle to deliver products
TRAINING
* Orientation and training provided on the job
* Training will focus on:
* Taking orders
* Labeling boxes
* Delivering product safely
* Avoiding hazards and distractions on the road
COMMUNICATION SKILLS
Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person.
ESSENTIAL FUNCTIONS/SKILLS
* Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator)
* Must be able to make correct monetary change
* Verbal, writing, and telephone skills to take and process orders
* Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed
* Ability to enter orders using a computer keyboard or touch screen
Qualifications
Additional Information
WORK CONDITIONS
Exposure to:
* Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks
* In-store temperatures range from 32 degrees in cooler to 90 degrees and above in some work areas
* Extreme weather conditions including
* temperatures ranging from 0 degrees up to 110 degrees outside
* Rain, fog, sleet, snow, ice, wind, dust, and more
* Sudden changes in temperature in work area and while outside
* Fumes from food odors
* Exposure to cornmeal dust
* Cramped quarters including walk-in cooler
* Hot surfaces/tools from oven and hot plates up to 500 degrees or higher
* Sharp edges and moving mechanical parts
SENSING :
* Talking and listening on telephone
* Near and mid-range vision for most in-store tasks
* Depth perception
* Ability to differentiate between hot and cold surfaces.
TEMPERAMENTS :
* The ability to direct activities
* Perform repetitive tasks
* Work alone and with others
* Work adequately under stress
* Meet strict quality control standards
* Work well with others
* Satisfy unhappy customers
* Analyze and compile data
* Make judgments and decisions
* Problem Solving
PHYSICAL REQUIREMENTS
* Standing
* Most tasks are performed from a standing position
* Height of most work surfaces is between 36 and 48 inches
* Walking/Jogging/Running
* For short distances or for short durations
* Sitting
* Paperwork is normally completed in an office at a desk or table
* Lifting
* Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck
* Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'
* Cases are usually lifted from floor and stacked onto shelves up to 72\" high
* Carrying
* Large bags/boxes/crates, weighing up to 50 pounds, are carried from the workstation to storage shelves
* Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray
* Pushing
* To move trays which are usually placed on dollies
* A stack of trays on a dolly is approximately 24 - 30 and requires a force of up to 7.5 pounds to push
* Climbing
* Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance
* Stooping/Bending
* Forward bending at the waist is necessary at the pizza assembly station
* Toe room is present, but workers are unable to flex their knees while standing at this station
* Duration of this position is approximately 45 - 120 seconds at one time, repeated continuously during the day
* Forward bending is also present at the front counter and when stocking ingredients
* Crouching/Squatting
* Performed occasionally to stock shelves and to clean low areas
* Reaching
* Reaching is performed continuously; up, down and forward
* Workers reach above 72\" occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves
* Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes
* Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones
* Hand Tasks
* Eye-hand coordination is essential. Use of hands is continuous during the day
* Frequently, activities require use of one or both hands. Shaping pizza dough requires frequent and forceful use of forearms and wrists
* Workers must manipulate a pizza peel when removing pizza from the oven, and when using the rolling cutter
* Frequent and/or forceful pinching is required in the assembly of cardboard pizza boxes
* Team Members must be able to grasp cans, the phone, the pizza cutter and pizza peel, and pizza boxes
* Team Members may be required to utilize pencils/pens, computers, telephones, calculators, TDD equipment, pizza cutter and pizza peel
Company Description
The QUIKRETE® Companies is the largest manufacturer of packaged concrete and cement mixes across the United States and Canada, serving both the commercial building and home improvement industries. With over 90 manufacturing facilities in North America, Puerto Rico, and South America, QUIKRETE® ensures extensive distribution and product availability. The company is recognized for its innovative and high-quality product offerings, developed at its state-of-the-art Technical Center. For more information, visit Engineer (AE): Full Time: Salary
Job Description: In this position, the candidate must have robot experience and a basic understanding of PLCs and how they operate. The AE will be the main contact for project development and execution, in addition to being able to demonstrate a high level of multi-tasking, at times. Robot system integration and remote plant support will be two key responsibilities of the Automation Engineer in this fast-paced opportunity. This job is located at the Quikrete Corporate Engineering office (Johns Creek, GA) and will require travel to company plant sites (30-40%)
Prerequisites:
- Education: Associate degree or Bachelor’s degree
- 3+ years of experience with Robotics (Fanuc is a plus).
- Travel: 30-40% and MUST be willing to travel on short notice.
- Clean background check/drug test required.
- Allen Bradley PLC/HMI experience is a plus.
- Knowledge of AutoCAD and how to use it.
- Must be able to work independently as well as within a team setting.
- Project leadership and accountability are critical for this position.
- Must promote a safe working environment along with good housekeeping practices.
Job Duties include but are not limited to:
ENGINEERING:
- The use of AutoCAD will be required to create system layout and part drawings.
- Properly maintaining and documenting orders for each projects budget.
- Developing robot simulations to achieve the most efficient production rates.
- PLC programming. Must be able to modify and read PLC programs.
- Robot programming for material handling applications.
ASSEMBLY:
- General fabrication (i.e., drilling, tapping, cutting, welding).
- Electrical wiring of motors, safety devices, and control panels.
- Conveyor assembly which includes power, sensor wiring/mounting, and troubleshooting.
- The AE should be able to create, read, modify, and follow electrical and mechanical prints.
- Wire and component labeling to correspond with the system prints.
CHECKOUT/PRE-SHIP:
- System testing, debugging and optimization to ensure company standards and productivity goals are achieved.
- Plant acceptance testing with plant personnel and upper management at Corporate ENG.
- Machine teardown and shipment preparation.
- Operators’ manual creation for plant use.
AUTOMATION SYSTEM COMMISSIONING:
- System debug and start up.
- Operator training on safety, operation, and troubleshooting.
- Ensure system is operating per the Plant acceptance testing.
- Provide daily commissioning updates.
- Coordinating with the Regional Engineer and Automation Technicians to get robot systems installed, debugged, and commissioned based on corporate specifications and standards.
LONG TERM SUPPORT:
- Providing remote support to plants from the Johns Creek office via company network.
- Staying in touch with preventative and predictive maintenance situations.
- Providing part numbers and vendor contacts to plant management.
- Provide urgent onsite assistance in down situations that may include travel on short notice.
Company Benefits:
- Medical, Dental, and Vision plans available.
- Company Credit Card for travel expenses. No out-of-pocket expense for business use.
- 401K + 401K Matching after 6 months of employment.
- 2 weeks of vacation per year. First year is prorated.
- 11 Company Paid Holidays
- Participation in Company Discretionary Bonus Program
- Cell phone, laptop, and tools will be provided.
If you have an interest in being part of one of the fastest growing industries in the nation in you may consider wanting to work for Trulieve! If you have a desire to help others in need through your efforts, this may be the role for you!
At Trulieve, we strive to bring our patients the relief they need in a product they can trust. Our plants are hand-grown in an environment specially designed to reduce unwanted chemicals and pests, keeping the process as natural as possible at every turn.
Our products are designed to alleviate seizures, severe and persistent muscle spasms, pain, nausea, loss of appetite, and other symptoms associated with serious medical conditions such as cancer.
Our specially trained staff works hand-in-hand with physicians to provide the right products and the correct dosage to ensure patients get the compassionate care they need.
To learn more about our company, please visit our website;
Requisition ID: 18414
Remote Work Available: No
Job Title: Fulfillment Associate
Department: Supply Chain
Reports To: Fulfillment Supervisor
FLSA Status: Non-Exempt
Location: Tampa, FL
POSITION SUMMARY
The Fulfillment Associate will be responsible for labeling, packaging, or shipping products in a production-scale medical cannabis facility.
KEY RESPONSIBILITIES
- Maintains quality standards by creating labels, calculating cannabinoids, and maintaining printers, and programs.
- Reviews strain names, types, variables, and overall quality of labels.
- Keeps daily inventories of all labels created, reprinted, used, wasted, and rejected.
- Restocking all inventory such as printheads, ink, and labels.
- Completing daily print jobs in a timely manner, while maintaining a high quality of all labels.
- Document labels approved and complete daily logs, summarizing re-works.
- Keeps printer equipment operating by following operating instructions, calling for repairs.
- Responsible for properly packaging various types of medical marijuana derivatives into the appropriate container accurately and efficiently.
- Label containers with the appropriate labels.
- Packaging products in totes for stores.
- Inspecting products to ensure all labels are present.
- Organize Finished Goods racks.
- Pull orders for the Packaging department.
- Move work orders to storage locations.
- Maintains a safe and healthy work environment by following standards and procedures, and complying with legal regulations.
- All other duties as assigned.
QUALIFICATIONS
- Ability to work in a production environment and meet production goals.
- Ability to focus, stay on task, and continuously demonstrate meticulous attention to detail.
- A working knowledge of the manufacturing/shipping operations, usually resulting from a minimum of 1-2 years of experience.
- Ability to read and understand procedures and follow verbal and written instructions.
- Demonstrated proficiency in the operation of manufacturing type of machinery.
- The ability to work in a team environment and strong communication skills are a must.
- Great attention to detail.
ADDITIONAL MINIMUM QUALIFICATIONS
- High School Diploma or equivalent.
- Must be a minimum of 21 years of age
- Must successfully complete a comprehensive background screening.
PHYSICAL REQUIREMENTS
- Must be able to push, pull, move, and/or lift a minimum of 50 lbs to a minimum height of 5 feet and able to push, pull, move, and/or carry such weight a minimum distance of 50 feet, with or without mechanical assistance.
- Must be able to work seated/standing as appropriate at workstations for extended periods of time, maintain body equilibrium while climbing ladders, stairways, stooping, kneeling, crouching, and reaching, and use hands/fingers to hold, grasp, turn, pick, pinch frequently/constantly to complete tasks.
- Must be able to handle organic matter daily, able to wear PPE as appropriate (eye, face, hand, arm, head, foot, body, fall protection), and able to be exposed to hot, cold, wet, humid, or windy conditions while wearing PPE (95 degrees or greater).
- Must have visual acuity with/without job aids to perform activities such as reading, viewing a computer terminal, and visual inspection involving small parts/details.
- Must be able to speak and communicate verbally at conversation levels with co-workers, vendors, etc. (Moderate noise).
Salary will be commensurate with experience. A comprehensive benefits package including paid time off is offered with this position.
Trulieve provides equal employment opportunities to all employees and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, pregnancy or any other characteristic protected by federal, state or local laws.
recblid 0i3r2ejiokn5ybtxvz2y7p4pvdphm2
Contract
Company DescriptionProminent Pharmaceuticals Company
Job DescriptionJOB TITLE: Project Manager - Technical I CLIENT: A prominent Pharmaceuticals Company CONTRACT: 12 months initial contract (5/22/2017) - there is a possibility of extension LOCATION: Collegeville - PA 19426 Pay Rate: To be discussed over the phone POSITION SUMMARY Responsible for implementation of new or revised labeling artwork for the company's Biopharmaceutical products. Colleague coordinates Artwork change control workflows for assigned products, markets, and/or vendors. Colleague fundamentally performs the ePALMS system (electronic Artwork and Labeling Management System) \"Market Coordinator\" role on behalf of WSR Regulatory Strategy functions at Country Offices (PCOs) and is the central Regulatory point of contact for the PGS (Global Services) plants/artwork centers. POSITION RESPONSIBILITIES Initiate and \"build\" Artwork Requests (PARs) on behalf of Markets, assuring all required information, specifications and/or supportive documentation is available for plants/artwork centers to execute the production of product labeling related packaging components. Liaises with market stakeholders and PGS plant and artwork centers, or demand management lines to coordinate any unique factors that need to be considered; documents agreement on artwork timelines across stakeholders; escalates any issues/concerns within ALIM functional line and/or relevant leadership for adjudication as necessary. Coordinate artwork change control logistics across multiple departments to assure regulatory timelines for implementation are met and that product supply is not interrupted. Support large-scale artwork change control projects with broad portfolio impact under the direction of more senior ALIM staff. Evaluates content of labeling updates and raises potential issues with WSR, PGS or relevant local Markets as appropriate to minimize impact on schedules. Retrieve documents and/or generate reports in response to queries from Regulatory Agencies (e.g. inspections) or Assistant General Counsel (e.g. product litigation cases related to labeling in distribution). ORGANIZATIONAL RELATIONSHIPS ALIM Market Implementation Specialists Regulatory Strategists Global Services Plant Coordinators and Artwork Centers Proofreaders (internal and external) Supply Demand Management Leads Marketing EDUCATION AND EXPERIENCE Bachelor's degree plus 1 4 years relevant work experience. TECHNICAL SKILLS REQUIREMENTS Document management tools used for storage, retrieval, and lifecycle management of labeling related secondary packaging components (e.g. ePALMS, GDMS - Global Document Management System, Agile, Pfzer Labeling End to End Tracking PfLEET, or similar systems). Packaging artwork review, copy editing or proofreading tools (e.g. Docu-Proof, TVT or similar tools). Position Comments visible to MSP and Supplier: Must have pharmaceutical experience in labeling, regulatory, or packaging. ***** What is the minimum education experience required?: Bachelor's degree plus 1 4 years relevant work experience
Additional InformationAll your information will be kept confidential according to EEO guidelines.
