Assembly Jobs in Usa

Job description:

Overview

The Engineer/Programmer is responsible for preparing and validating PCB fabrication and assembly data packages while also programming and supporting production equipment across Adura’s SMT, inspection, and electrical test platforms.

This role bridges design-to-manufacturing execution by converting customer data into production-ready CAM outputs and machine programs for SMT lines, AOI, X-ray, and Flying Probe systems. The position plays a critical role in enabling high-reliability thermal PCB-A production for Automotive, Medical, Defense, and Aerospace markets.

Key Responsibilities

CAM & DFM Responsibilities

• Review customer Gerber, ODB++, IPC-2581, and CAD data for manufacturability
• Create panel layouts optimized for yield, SMT flow, and thermal PCB constraints
• Define stack-ups, copper weights, materials, impedance requirements
• Perform DFM analysis for heavy copper, metal-core, and high-power designs
• Generate fabrication drawings, drill files, and production documentation
• Manage revision control and maintain accurate data records
• Support quoting with panel yield calculations and fabrication cost drivers

Machine Programming & Production Support

• Program SMT pick-and-place machines (component libraries, feeder setup, placement files)
• Generate and optimize solder paste printer programs (alignment, offsets, stencil parameters)
• Program 3D SPI inspection parameters and board models
• Develop AOI inspection programs and tuning criteria
• Support X-ray inspection programming for void analysis and BTC/QFN inspection
• Create and validate Flying Probe test programs for electrical verification
• Assist in NPI builds by debugging programs and optimizing cycle time
• Maintain component libraries and machine databases
• Collaborate with Process Engineering to optimize placement strategy and throughput

Requirements

• 3+ years experience in PCB CAM and SMT manufacturing environments
• Proficiency with CAM350, Genesis, or equivalent CAM software
• Hands-on experience programming SMT equipment (printer, pick-and-place, AOI)
• Familiarity with X-ray and Flying Probe programming environments preferred
• Strong understanding of PCB stack-ups, thermal materials, heavy copper routing
• Experience with high-mix / low-to-medium volume production environments
• Strong documentation and attention to detail
• Ability to troubleshoot machine programs and support production ramp-up

Ideal Candidate Profile

• Comfortable moving between CAD data and production floor
• Strong problem-solving mindset
• Detail-oriented but production-focused
• Understands impact of programming decisions on yield and cycle time
• Familiar with IPC Class 2/3 environments

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Experience:

• SMT Programming: 2 years (Required)
• CAM programming: 1 year (Required)
• electronics manufacturing: 1 year (Required)

Work Location: In person

The Industrial Automation Engineering Director is responsible for leading a team of engineers focused on the successful execution of manufacturing engineering projects. This includes overseeing all aspects of project implementation, from initial processing, design and development to final production launch at the assembly site. The Execution Senior Manager will work closely with cross functional teams to ensure projects are delivered on time, within budget, and to the highest quality standards. This individual will be involved with setting the direction for the future of our manufacturing process. This position takes on a high level of independent decision making and communication as the lead onsite during project installation and startup.

Job Responsibilities

• Develop and implement project plans, investment required, timelines, and budgets.

• Monitor project progress, identify and resolve roadblocks, and mitigate risks.

• Ensure adherence to engineering standards, best practices, bill of process, bill of equipment, safety, and regulatory requirements.

• Collaboration with internal teams and external vendors to generate high-quality, cost-effective solutions in very short periods of time.

• Lead comprehensive end-to-end warehouse design projects from conceptualization to implementation

• Stay abreast of industry trends and emerging technologies in manufacturing engineering.

• Bachelor's degree required in mechanical engineering, electrical engineering, industrial

engineering etc; Master's degree preferred in Industrial Engineering, Supply Chain

Management, or related field

• 8+ years of progressive experience in warehouse/distribution center design and

optimization in large-scale projects

• Demonstrated track record of end-to-end warehouse design implementations

• Strong proficiency in project management methodologies, such as Agile and Six Sigma,

ensuring efficient project execution and continuous improvement.

• Experience with processing equipment, throughput, and comprehensive understanding

of manufacturing processes, enabling effective design and production.

• In-depth knowledge of lean manufacturing principles and continuous improvement

methodologies, fostering operational efficiency and waste reduction.

• A strong understanding of safety regulations and procedures, ensuring a safe working

environment for all team members.

• Experience in a high-volume manufacturing environment, demonstrating the ability to

thrive in fast-paced settings. Experience with reliability and maintainability of

processing equipment, standalone availability, and throughput.

Salary: $180,000 + bonus

BUILT TO CONNECT

Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world.

ABOUT THE POSITION

Under general supervision of the Engineering Director/Manager, the job of the Hydraulic Design Engineer is responsible for design efforts from inception through production in new product development or existing product design.

The Hydraulic Design Engineer will work in collaboration with other engineers, cross-functional teams not limited to sales, manufacturing, purchasing, and service. They will develop conceptual and final design solutions manage and coordinate project activities, support existing product offerings, and perform testing or analysis of new and existing products to further Astec’s product line development goals.

This Hydraulic Design Engineer’s scope of work will focus on Hydraulically Controlled equipment such as track screening and crushing, mobile mining, portables, asphalt milling and paving, track and mobile and forestry, and stationary equipment.

The preferred work location is Yankton SD.

Deliverables and Responsibilities:

· Perform hydraulic design engineering as it relates to Astec product development and improvement projects.

· Effectively use 3-D CAD to model designs and use other engineering tools like Automation Studio to optimize solutions

· Create, check and maintain thorough engineering specifications and drawings

· Manage engineering changes per establish company procedures

· Interact with production personnel to define and solve manufacturing and/or design issues and implement cost reduction ideas with regards to the product

· Use root cause analysis and other problem-solving skills to determine opportunities to improve products and implement corrective actions.

· Responsible for achieving due dates and pre-defined requirements defined by management

· Be a technical resource as needed to support other departmental needs such as operations, quality, purchasing, service, et cetera

To be successful in this role, your experience and competencies are:

· Minimum of bachelor’s degree in Mechanical, Agriculture, Mechatronics, Industrial Engineering or related field

• · Minimum 5 years’ experience in equipment design and manufacturing (mechanical, structural, hydraulic and electrical/control system design)
• · Ability to work positively and productively both individually and with cross-functional teams, customers, and vendors.
• · Good organization and time-management skills with ability to adjust to sudden changes in project/priority and manage multiple tasks
• · Ability to exercise discretion and independent judgment on a customary and regular basis

· Effectively work with sketches, marked-up prints and verbal instructions to drive concept to solution

· Ability to independently create & validate hydraulic circuits using simulation software such as Automation Studio.

· Demonstrate technical and written skills to document ideas, designs and concepts

· Ability to create and maintain complex hydraulic schematics.

· Ability to interpret customer drawings, specification drawings, and other applicable specifications to determine requirement and/or feasibility of component

· Develop design concepts to meet required cost objectives including involvement with supply chain operations to provide technical information for the selection of components.

· Ability to develop and/or guide necessary computations such as load development, stress analysis, performance measurement, hydraulic circuit analysis, costing, etc. and interpret the results as necessary

· Ability to lead DFMEA’s.

· Researches industry standards to stay abreast of latest applicable requirements. Performs GAP analysis on standards.

• · Proficient with personal computing, Microsoft Office Suite, 3-D CAD software applications (SolidWorks preferred) and ERP systems (Oracle preferred)
• · Document assigned tasks as required

Travel Requirements: May be asked to travel to develop business relationships with customers, dealers, and suppliers as well as visit other sites to participate in special projects. Our Culture and Values

Employees that become part of Astec embody the values below throughout their work.

• · Continuous devotion to meeting the needs of our customers
• · Honesty and integrity in all aspects of business
• · Respect for all individuals
• · Preserving entrepreneurial spirit and innovation
• · Safety, quality and productivity as means to ensure success

WORK ENVIRONMENT

The Hydraulic Design Engineer will work in multiple environments including those listed below.

Office

While performing the duties of this job, the employee is regularly exposed to risk of injury in an office environment and occasionally a manufacturing shop plant environment. Duties include a typical office setting including extensive computer work, sitting or standing. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Manufacturing Environment

Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EQUAL OPPORTUNITY EMPLOYER

As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

As the largest and most experienced national independent commercial mortgage banking firm in the United States, Gantry arranges financing for some of the country's top commercial real estate developers and owners. Our relationships with institutional lenders include an expansive line-up of life insurance companies, pension funds, and government-sponsored agencies, as well as commercial and investment banks. We originate business nationally and service loans in 46 states.

We are excited to welcome a dedicated Capital Markets Production Associate to our Upstate, NY office. Collaborate within a supportive team environment that values flexibility, cooperation, and a positive mindset. We're seeking an individual with exceptional organizational abilities, a knack for multitasking, and a keen sense of prioritization. If you possess excellent writing skills, creative financial modeling, and an unwavering eye for detail, you might be our ideal candidate! This is an in-office position.

Gantry arranges debt and equity financing from $1 million to over $500 million on behalf of commercial real estate developers and investors. The position will support staff with due diligence, presentations, analysis and underwriting.

The Production Associate’s principal responsibilities include the following:

·       Conduct comprehensive commercial real estate underwriting and analysis using Excel-based tools for precise financial modeling

·       Craft insightful narrative analyses encompassing borrowers, properties, locations, and market trends

·       Assemble meticulously organized electronic loan submission packages of professional standard required by the capital markets

·       Perform property and comp location inspections, along with capturing high-quality photographs

·       Facilitate due diligence processes, including legal reviews, lease analyses, and commitment compliance during closings

·       Engage and cultivate relationships with borrowers, lenders, and other esteemed professionals in the national and local commercial real estate markets

Requisite skills and experience for this position include:

·       A bachelor's degree from an accredited institution is mandatory

·       While 2+ years of applicable work experience is preferred, fresh talents with a strong aptitude and skillset are encouraged to apply

·       Real Estate sales license or taking necessary steps to gain license is a plus

·       Strong written and verbal communication skills

·       Proficiency in Microsoft Office suite (Outlook, Word, Excel, PowerPoint) and Adobe Acrobat is critical

·       Exceptional written and verbal communication skills to convey ideas effectively

·       Ability to execute instructions meticulously and thrive in collaborative team settings

·       Advanced internet research capabilities to gather and synthesize information effectively

·       Ability to analyze qualitative and quantitative information and translate into strategic deliverables

·       Self-motivating individual who is detail-oriented, has strong organizational skills, and the ability to work independently and within a team under deadlines

·       Ability to multi-task, work successfully under pressure and effectively manage time and workload

Perks & Benefits:

We believe in rewarding our team members generously. Our competitive benefits package includes medical and dental coverage, a 401K plan with employer contributions, and much more. Compensation will be commensurate with experience and qualifications, reflecting our commitment to recognizing and valuing talent.

Gantry is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

At Gantry, independent thinking is in our genes. As a privately held firm, we take a thoughtful and intentional approach to everything we do. So, as our industry consolidates and becomes less personal, we push ourselves to ignore convention, to set a high standard and to always prioritize people ahead of profits. With over 40 years of experience managing a $23 billion national servicing portfolio, our firm leverages a well-established correspondent-driven platform to construct the best financing solutions for our clients. For those seeking a partner that delivers more, we’re a little different. The right kind of different.

Duration: Permanent/Full-time

Client: One of the largest Diesel Engines and Power Generators manufacturers in the US

Overview:

We are looking for an Industrial Machine Repair Technician III who troubleshoots, assembles, installs, tests and maintains mechanical systems using all necessary tools to keep equipment available and capable. Learns and understands the protocols of working safely with electricity and other energy sources with industrial equipment. May work independently and instruct or coach others.

Duties:

• Strengthen equipment reliability by expertly troubleshooting, assembling, installing, and maintaining mechanical systems to keep production running smoothly.
• Elevate workplace safety by proactively identifying hazards, stopping unsafe work, and modeling strict adherence to HSE protocols and PPE requirements.
• Improve environmental stewardship by recognizing how daily tasks affect the environment and consistently acting to reduce negative impact.
• Enhance product quality through meticulous craftsmanship, precise use of technical documentation, and thorough inspections that prevent defects and reduce cost exposure.
• Boost operational performance by executing preventive, corrective, emergency, and predictive maintenance that minimizes downtime and supports production goals.
• Develop team capability by coaching less experienced technicians, sharing knowledge, and serving as a trusted resource for troubleshooting and best practices.
• Drive process improvement by identifying constraints, solving recurring problems, and contributing to continuous improvement and TPM initiatives.
• Strengthen team cohesion by communicating clearly, collaborating across support groups, and actively engaging in training and personal development to support collective success.

Qualifications:

• At least 7 years of experience in a relevant trade field, or A Journeyman Trade Certificate with relevant experience, or A 2-year technical degree in a related field, plus 3 years’ experience working in the Machine Repair/Industrial Electrical field.
• Knowledge of mechanical systems including hydraulics, pneumatics, conveyance systems, CNC equipment, and automation required.
• Responsible for completing machine layouts and machine installations.
• Relevant Experience may include: Controls Engineering, Industrial Automation, Robotics, Residential or Commercial Electrical, Heavy Duty Equipment Maintenance, Welding and Fabrication, Machining, and Farming and Agricultural work, specifically maintenance and repair of equipment etc.

Spacecraft Manufacturing Engineer

Cape Canaveral, FL

Full-time | On-site

About the Organization

Evona is partnered with a VC-backed advanced space infrastructure company developing expandable habitat systems for lunar exploration, low Earth orbit, and future deep-space missions.

The team is building large, human-rated expandable structures that combine soft goods assemblies and metallic structures, enabling lightweight, high-volume space habitats for sustained human presence beyond Earth.

The Role

As a Spacecraft Manufacturing Engineer, you will define and implement the manufacturing processes, tooling, and build flows required to produce large expandable space habitat structures. You’ll work closely with engineering, quality, and test teams to translate complex designs into repeatable, flight-ready manufacturing processes.

Key Responsibilities

• Develop and document manufacturing processes for expandable habitat structures
• Translate engineering designs into certifiable build and assembly workflows
• Design and support specialized tooling, fixtures, and handling equipment
• Lead integration of soft goods and rigid structures
• Support manufacturing-related testing, qualification, and anomaly resolution
• Collaborate closely with Quality Assurance and Safety teams

Qualifications

• Bachelor’s or Master’s degree in Mechanical Engineering, Aerospace Engineering
• Strong background in aerospace or spacecraft manufacturing and integration
• Experience with flight-certified manufacturing processes and QA documentation
• Familiarity with NASA or similar human-spaceflight standards
• Hands-on, detail-oriented approach to building real hardware

Why This Role

• Work on groundbreaking lunar habitat hardware in a well-funded startup
• See direct impact of your work on flight-bound systems
• Join a small, mission-driven engineering team building the future of human spaceflight

Work Location: In person – Cape Canaveral, FL

About Us:

Adura is a fast-growing electronics manufacturing company specializing in high-performance LED modules, drivers, and advanced thermal PCB technologies. We support leading OEMs with rapid prototyping and high-volume production, custom PCB design, and high-quality PCB assembly made in Corona, California. With over 1,000 standard LED module and LED driver products and strong global manufacturing capabilities, we help customers solve complex thermal, optical, and power challenges. At Adura, you’ll join an innovative team building the next generation of electronics for Industrial, Medical, LED Lighting, Automotive, Defense and Aerospace markets.

Overview

The PCB-A / Manufacturing Process Engineer leads the development, implementation, and optimization of Adura’s high-reliability thermal PCB, PCB-A, and integrated box-build manufacturing operations.

This role owns end-to-end process control across SMT, THT, selective soldering, vacuum/nitrogen reflow, X-ray validation, electrical test (Flying Probe), conformal coating, and full box-build / subsystem integration.

The position ensures robust manufacturing flow, yield performance, and regulatory compliance for Aerospace, Defense, Automotive, Industrial, Lighting, and Medical device programs.

Key Responsibilities

SMT & PCB-A Manufacturing

• Lead full SMT line setup including solder paste printing, 3D SPI control, reflow profiling (vacuum/nitrogen), AOI tuning, X-ray validation, and electrical test integration
• Optimize thermal PCB processes including heavy copper, metal-core, and high-current assemblies
• Establish process controls for Flying Probe electrical validation and functional testing
• Drive yield improvement, scrap reduction, and cycle-time optimization
• Develop PFMEA, control plans, DOE, SPC/CPK strategies

Box Build & Subsystem Assembly

• Design and implement scalable box-build manufacturing flow for complete electronic subsystems
• Develop mechanical assembly processes including torque control, harness integration, connectorization, and enclosure assembly
• Establish ruggedization processes including conformal coating, potting, sealing, and environmental protection
• Define functional test protocols for integrated subsystems
• Support builds of aerospace control modules, defense electronics assemblies, industrial power systems, medical device subsystems, and high-performance lighting modules
• Ensure full material traceability and serialized tracking at subsystem level

Compliance & Regulated Markets

• Ensure compliance with IPC Class 2/3 standards
• Support and maintain ISO 9001 certification
• Drive readiness for AS9100 (Aerospace), IATF 16949 (Automotive), and ISO 13485 (Medical)
• Collaborate with Quality on audits, corrective actions, and documentation control
• Establish validated manufacturing processes suitable for regulated markets

NPI & Equipment Leadership

• Lead NPI builds and process validation for new product introductions
• Evaluate and implement new equipment, tooling, automation, and production upgrades
• Oversee thermal profiling, stencil design, panelization optimization, and assembly fixturing
• Train and mentor operators and technicians on advanced manufacturing controls

Requirements

• 7+ years of experience in EMS / PCB-A manufacturing
• Extensive hands-on SMT setup experience (SPI, AOI, reflow profiling, X-ray validation)
• Experience with Flying Probe or ICT testing environments
• Experience implementing or managing box-build and subsystem integration lines
• Strong knowledge of thermal PCB materials, heavy copper, and metal-core assemblies
• Experience working in Aerospace, Defense, Automotive, Lighting, or Medical device environments
• Strong background in Lean, Six Sigma, SPC, PFMEA, and DOE
• BS in Electrical, Mechanical, or Manufacturing Engineering preferred

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Sr. Manufacturing/Assembly Process Engineer

• Develop the plans and work instructions for the successful handling, manipulation, guidance, and general integration of sub-system components
• Assist in finalizing the strategy for each assembly step, as well active collaboration with the system teams to find the optimum assembly steps, tools, methods, strategies, safety measures, specifications, and other details
• Within the plan development, ensuring tool and personnel access is available as required for system assembly steps as outlined by the system owners
• Be responsible for the plans for part movement at each step and checking for no interferences with other systems during movement and part placement
• Be responsible for construction of the assembly work instruction packets for all sub-assemblies, and the incorporation of them into the assembly work orders to create the optimum assembly and testing sequence
• Provide assistance in development and improvement of the work instruction packet and work order creation process to increase standardization, efficiency, safety, clarity, and overall good communication of the instructions for the success of the assembly process
• Participate in collaborative work with the assembly engineers, tooling engineers, designers, coordinators, as well as direct personnel performing the System Assembly during on-site work

Requirements/Experience:

• At least 2 years technical experience in the integration of complex and large mechanical structures (e.g. aerospace, chemical) and experience in work instruction packet creation
• Bachelor’s or associate degree in a related field, metrology, high-vacuum projects and processes, experience with manufacturing management software, NX, large Component (>10 Ton) lifting experience
• Exceptional attention to detail
• Safety conscious and proactive
• An ability to clearly express and critique ideas
• An aptitude to use data to drive decisions
• An emphasis on elegance and simplicity over complexity
• The ability to thrive in fast-paced, dynamic environments

Must Haves:

• 3+ years in Quality Assurance in manufacturing/production/assembly
• Experience working in automotive, semiconductor, electronics, or highly automated environments
• 2+ years in a supervisor role
• Experience working with Lean Manufacturing/JIT, Six Sigma methodologies and Total Quality fundamentals

Plusses:

• Certifications (UL1703, IEC 61215, IEC61730-1, IEC61730- 2, Green Belt, etc)
• Experience with solar modules

Job Description:

The Quality Supervisor is responsible for overseeing and ensuring the implementation of quality control measures and standards within the organization. You will play a crucial role in maintaining and improving the quality of products, processes, and services. Your attention to detail, analytical skills, and leadership abilities will contribute to the overall success of the company's quality management efforts.

Responsibilities:

• Manage daily performance of QC staff
• Responsible for leading, motivating, and training QC personnel to meet or exceed department and company goals and objectives
• Lead or assist in Quality department projects as assigned by Management and assist Engineering and Manufacturing with projects, as appropriate
• Investigate root cause of customer complaints and initiate/complete corrective action, as appropriate
• Propose, promote and champion actions to improve quality, processes and product
• Eliminate process variation and product defects through creative solutions
• Maintain ISO based quality systems
• Implement and manage systems to complete statistical analyses and control of all products including raw materials, WIP materials, non-conforming products, and finished goods
• Ensure customer requirements are met
• Devise ways to reduce waste and increase efficiency
• Actively drive Lean Manufacturing initiatives using all available tools and technologies
• Maintain professional and technical knowledge by attending educational workshops, reviewing professional publications, establishing personal networks, and participating in professional societies
• Participate in internal and external audits
• Develop and present KPI reports

Job Title:       Design Engineer II

Department:    Product Development

Reporting to:    Engineering Division Manager

SUMMARY: 

Design Engineer II is responsible for the design, development, and implementation of new manufactured products and proprietary equipment as well as improvement to existing products.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Originates and/or develops product designs relating to defined customer needs as well as proprietary products in new to market applications; collaborates with Sales and Management to develop new business opportunities. 
• Utilizes conventional engineering principles to provide comprehensive engineering studies of components, weldments and assemblies suited to meet detailed product performance specifications. 
• Identifies, evaluates, and recommends materials and production processes to optimize product performance and manufacturing efficiency.
• Plans and directs product testing requirements, if not previously specified by the customer.
• Perform design for manufacturability reviews, Bill of Material management, and cost evaluations.
• Provide engineering support to Manufacturing, Purchasing, Sales, Marketing, and Management Teams.
• Maintain detailed management of engineering documents, designs, evaluations, and related materials.
• Coordinate with Production and Operations teams to ensure the timely completion of development projects.
• Other responsibilities as assigned.

EDUCATION AND/OR EXPERIENCE:

• B.S. in Mechanical Engineering or related field
• Proficient creating parts, assemblies, and drawings with design software i.e. SolidWorks, Inventor, AutoCAD
• 4 or more years of Engineering experience in a manufacturing environment.
• Prior experience with ERP management software is required.
• Experience working in welding, sheet metal fabrication, hydraulics or plastics molding is preferred.

OTHER ESSENTIAL SKILLS AND ABILITIES:

• Project Management - Prioritizes and plans work activities efficiently; sets goals and objectives while developing realistic action plans to achieve targets; able to work independently as well as in a team environment. 
• Displays original thinking and creativity, strong problem-solving capabilities.
• Analytical and Diagnostic Skills - Methodical in solving problems backed by accurate data and analysis of findings.
• Communication - Speaks clearly and concisely; listens and requests clarification when needed; takes direction well.
• Must be proficient with Microsoft Word, Excel, and Outlook
• Willingness to participate in hands-on work in a Manufacturing Environment.

PHYSICAL DEMANDS:

Position requires the ability to react, move about, install, remove, replace, and lift objects up to 50 lbs. Must be able to exchange information verbally, detect and observe situations, and work with others. Position may require the use of automobiles, ATV’s, test equipment, mechanical and electrical devices, tools, and computers. At times you will be required to wear Personal Protective Equipment when entering production areas and working near moving equipment and machinery. May be exposed to noise, dust, and cold/hot temperatures when working in production or prototype areas. 

WORKING CONDITIONS:

Work is generally performed in an office environment with some time spent in production environments. The essential duties and responsibilities, knowledge, skills, abilities, physical demands, and work environment are representative of those that must be met and performed satisfactorily or will be encountered with this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Job Title: Lead Design Engineer

Location: Tallassee, AL

Tata Technologies is seeking a Lead Designer to drive the structural design and integration of fuselage and wing components for utility aircraft using 3DEXPERIENCE tools. The role requires strong technical expertise in metallic and composite structures, weight optimization, and manufacturability, while ensuring compliance with aerospace certification standards. The Lead Designer will collaborate closely with cross-functional teams spanning stress analysis, manufacturing, and certification to deliver robust, efficient, and certifiable structural solutions.

Dimension of Function

Accountable for leading the design and development of fuselage and wing structures using Catia v5 and 3DEXPERIENCE platforms. Applies advanced knowledge of metallic and composite materials to achieve structural integrity, weight reduction, and cost efficiency while ensuring compliance with aerospace standards throughout the design, validation, and certification lifecycle.

Contacts

Works in close coordination with design, stress, manufacturing, and certification teams. Interfaces with project leads, suppliers, and regulatory authorities to ensure alignment, timely delivery, and compliance with program requirements.

Area of Responsibility

• Lead structural design activities for fuselage and wing assemblies under multiple load cases.
• Author, review, and approve CAD models, drawings, and design documents ensuring compliance and manufacturability.
• Collaborate with Stress Analysis team to validate and refine structural concepts.
• Drive design optimization for weight reduction, performance improvement, and cost-effectiveness.
• Apply expertise in metallic and composite materials to achieve efficient, durable, and certifiable structures.
• Conduct quality checks of design deliverables to ensure accuracy and adherence to standards.
• Interface with certification authorities to align with FAR 23 & FAR 27 requirements.
• Support prototype build, ground tests, and flight test campaigns to confirm design intent.

Knowledge / Experience

• 10+ years of experience in aerospace structural design.
• Bachelor’s degree in Aerospace / Mechanical Engineering
• Strong proficiency in CATIA V5, ENOVIA, and 3DEXPERIENCE.
• Well versed with composite modelling best practices and design principles.
• Deep understanding of both composite and metallic structures.
• Hands-on experience in structural weight optimization and material trade-offs.
• Familiarity with aerospace certification standards (FAR 23 & FAR 27).
• Exposure to eVTOL or UAV platforms is an advantage.
• Demonstrated project leadership, documentation, and presentation skills

Controls Engineer – Automation & Robotics (6 Openings)

Location: Elgin, IL (On-site)

Job Type: Direct Hire | Full-Time

Compensation: $95,000 – $150,000 (up to $160,000 for exceptional experience)

Benefits: Comprehensive benefits starting Day 1 (medical, dental, vision, 401k, stock programs, PTO, holidays)

About the Role

We are expanding our Automation Development team and are seeking Controls Engineers to support the design and build of highly advanced, custom automation and robotic equipment for autonomous vehicle production. This is a hands-on role focused on conceptual, in-house engineered systems—not repetitive builds or catalog automation.

Engineers in this group own projects end-to-end, from early concept and proof-of-principle through programming, debug, factory acceptance testing, and on-site integration. The current flagship project supports a next-generation autonomous vehicle platform, with the first production units already shipped.

This role is ideal for Controls Engineers coming from systems integrators or custom machine builders who enjoy variety, ownership, and technically challenging work.

Key Responsibilities

• Design, program, and debug PLC, HMI/SCADA, robotics, servo, and machine vision systems
• Develop control architectures for custom automation and robotic equipment
• Review electrical schematics and contribute to hardware and network architecture
• Perform system bring-up, debugging, validation, and factory acceptance testing
• Collaborate closely with mechanical engineers, assembly teams, and manufacturing
• Support equipment installation and integration at U.S. manufacturing facilities

Travel

• Typical travel averages 10–25% (historically fluctuates by project)
• Travel is limited to 4 U.S. manufacturing locations (California, Texas, Nevada)

Qualifications

• Experience in custom automation, robotics, or systems integration
• PLC programming experience ( Siemens preferred, Rockwell/Allen-Bradley also acceptable )
• Engineers proficient in Rockwell who are open to transitioning to Siemens are strongly encouraged to apply
• Experience with HMI/SCADA platforms (WinCC, Ignition, FactoryTalk, or similar)
• Bachelor’s degree in Electrical Engineering, Controls, Mechatronics, Automation, or related field (or equivalent experience)

Why This Opportunity Stands Out

• Work on fully conceptual, in-house designs with protected intellectual property
• Exposure to cutting-edge autonomous vehicle and robotics technology
• Projects that most automation houses and integrators never get access to
• Strong compensation, Day-1 benefits, and long-term growth potential
• Collaborative engineering culture with high technical standards and visibility

Manufacturing Engineer – Advanced Detector Systems

Location: Sturbridge, MA (100% Onsite)

Salary: Up to $140K depending on experience

Environment: ISO 7 Cleanroom, High‑Voltage/High‑Vacuum Equipment

Candidates with backgrounds in semiconductor fabrication, vacuum systems, photonics, electron‑optical components, or high‑voltage instrumentation are strongly encouraged to apply.

Position Summary

We are seeking a hands‑on Manufacturing Engineer to support electrical testing, troubleshooting, and production of advanced detector technologies, including microchannel‑based devices and electron‑multiplying components. This role is highly technical and hardware‑focused, requiring daily work on the production floor within an ISO 7 cleanroom.

You will ensure detector assemblies meet stringent electrical, vacuum, and performance specifications while supporting test station operations, conducting full detector teardowns, and maintaining test capability during high‑priority manufacturing periods. This position also plays a key role in transitioning from manual testing to more automated systems.

What You’ll Do

Electrical Testing & Data Integrity

• Perform electrical testing on detector components using high‑vacuum systems (10⁻⁷ to 10⁻⁶ Torr).
• Maintain test stations and ensure data accuracy and traceability.
• Identify and escalate anomalies in test results.

Troubleshooting & Failure Analysis

• Diagnose electrical, mechanical, and vacuum‑related issues in detector assemblies.
• Conduct full mechanical and electrical teardowns.
• Investigate failure modes such as low gain, shorts, contamination, vacuum leaks, alignment issues, or component damage.

Manufacturing Support

• Work directly with cleanroom operators to resolve production issues quickly.
• Update work instructions, procedures, and test documentation.
• Train operators and new engineers on testing, teardown, and handling methods.
• Support yield improvement and scrap‑reduction initiatives.
• Track, analyze, and report yields, scrap rates, and defect trends.
• Provide day‑to‑day support across multiple product lines; occasional off‑shift work may be required.

Process Control & Continuous Improvement

• Use MINITAB for basic SPC, trend analysis, and yield monitoring.
• Support the transition from manual to semi‑automated test equipment.
• Identify opportunities to improve test repeatability, throughput, and data capture.
• Contribute to Lean Manufacturing, 5S, and SPC implementation.
• Promote adherence to ISO 9001‑based quality systems.

Equipment & Fixture Support

• Maintain and configure high‑voltage power supplies, vacuum controllers, electrometers, oscilloscopes, and custom fixtures.
• Assist in modifying fixtures or creating temporary setups to maintain production continuity.

Required Qualifications

• U.S. citizenship (required due to ITAR regulations).
• Bachelor’s degree in Engineering (Electrical, Mechanical, Materials, Physics, or related field).
• Hands‑on experience with high‑voltage systems, high‑vacuum equipment, precision instrumentation, or cleanroom operations.
• Strong mechanical aptitude and comfort working directly with hardware.
• Ability to troubleshoot electrical and mechanical issues methodically.
• Strong technical communication skills—written and verbal.
• Proficiency with MS Office, MRP systems, databases, and analytical/statistical tools.
• Ability to work full‑time onsite in an ISO 7 cleanroom environment.
• Willingness to learn specialized detector physics and test methods.

Preferred Qualifications

• Background in semiconductor, photonics, vacuum systems, electron optics, or detector technologies.
• Experience with SPC tools, MINITAB, or basic statistical analysis.
• Familiarity with high‑voltage power supplies, vacuum chambers, turbopumps, or electrometers.
• Experience assembling or disassembling delicate electro‑mechanical components.
• Understanding of gain behavior or noise mechanisms in electron‑multiplying devices (e.g., PMTs, MCPs, avalanche detectors).

Work Environment

• 100% onsite in a high‑tech manufacturing facility.
• ISO 7 cleanroom requiring gowning, gloves, and contamination‑control procedures.
• Work involves high‑voltage and high‑vacuum equipment; full safety training provided.
• Standard day shift with occasional support needed for urgent production issues.
• PPE such as safety glasses, gloves, and hearing protection may be required.

We are seeking an ambitious and results-driven Outside Sales Representative to join our dynamic sales team. The ideal candidate will be responsible for driving sales through contacting current and prospective customers and effectively communicating the value of our hardwood lumber, plywood, mouldings and accessories.

This position manages key aspects of the sales and procurement cycles. Primary duties include handling all inbound customer inquiries, generating quotes, processing sales orders, and negotiating sales prices. This role also holds significant purchasing authority, responsible for analyzing hardwood usage reports, issuing purchase orders, and binding the company on wholesale inventory purchases from hardwood suppliers. Additional responsibilities include prospecting for new business, inspecting staged orders for accuracy, processing customer credits, and coordinating with the Brazos Mill Team to enforce sales initiatives.

ESSENTIAL FUNCTIONS

Reasonable Accommodations Statement: To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions.

Essential Functions Statement(s)

• Buyer is authorized to negotiate pricing, volume, and selection of inventory based on analysis of the economy, specific market trends and demand of the specific product in specific markets.

• Buyer is accountable to purchase the line share of inventory for the entire company.• Buy products from manufacturers or brokerage firms and distribute them to wholesale and retail clients.

• Negotiate details of contracts and payments, and prepare sales contracts and order forms.

• Perform administrative duties, such as preparing sales budgets and reports, keeping sales records, and filing expense account reports.

• Monitor market conditions, product innovations, and competitors' products, prices, and sales.

• Check stock levels and reorder merchandise as necessary.

• Answer customers' questions about products, prices, availability, product uses, and credit terms.

• Recommend products to customers, based on customers' needs and interests.

• Contact regular and prospective customers to demonstrate products, explain product features, and solicit orders.

• Estimate or quote prices, credit or contract terms, warranties, and delivery dates.

• Consult with clients after sales or contract signings in order to resolve problems and to provide ongoing support.

• Prepare drawings, estimates, and bids that meet specific customer needs.

• Provide customers with product samples and catalogs.

• Identify prospective customers by using business directories, following leads from existing clients, participating in organizations and clubs, and attending trade shows and conferences.

• Arrange and direct delivery and installation of products and equipment.

• Obtain credit information about prospective customers.

• Forward orders to manufacturers.

• Plan, assemble, and stock product displays in retail stores, or make recommendations to retailers regarding product displays, promotional programs, and advertising.

• Negotiate with retail merchants to improve product exposure such as shelf positioning and advertising.

• Train customers' employees to operate and maintain new equipment.

• Drives and operates vehicle safely on public roads 90% or more of the daily activities.

Qualifications:

- Strong proficiency in English, both verbal and written (Bilingual [Spanish] is a plus)

- Proven experience in sales, particularly outside sales

- Familiarity with hardwood lumber, plywood and associated industry items

- Ability to effectively communicate and build rapport with customers

- Experience in hardwood lumber and plywood sales

- Self-motivated with a passion for achieving sales goals

Pay includes base salary plus commission along with health insurance, dental, vision and 401k matching.

If you are looking to advance your career in the industry and have a passion for hardwood lumber and plywood and building customer relationships, this Inside Sales Representative position offers an exciting opportunity for growth and development.

Skills

- English

- Negotiate

- Technical sales

- Customer service

- Telemarketing

- Inside sales

- Software

- Outbound calling

- Business development

- Communicate

Job Title: Electrical Designer

Location: Peoria, IL

Employment Type: Long term

Job Summary

We are seeking an experienced Electrical Designer to support the design and development of off-highway vehicle electrical systems. The ideal candidate will have strong hands-on experience in electrical design and documentation, including 2D/3D drawings, harness routing, enclosure modeling, and BOM creation, with solid exposure to off-highway or heavy equipment applications. This role requires close collaboration with cross-functional and offshore teams to deliver accurate, manufacturable electrical designs.

Key Responsibilities

• Develop detailed electrical design drawings, plans, and diagrams based on design specifications
• Create and maintain 3D models for:
• Enclosure assemblies and installations
• Electrical harnesses, cable routing, and electrical fitment layouts
• Translate sketches, specifications, and verbal instructions into accurate engineering drawings, including:
• Flattened production drawings
• 2D to 3D associative models
• Ensure designs comply with applicable engineering standards, codes, and regulations
• Collaborate with operations and manufacturing teams to identify drawing-related issues
• Work closely with design engineers to clarify design intent and resolve design issues
• Modify and revise drawings based on design changes and engineering feedback
• Create and maintain Bills of Materials (BOMs) and supporting manufacturing documentation
• Coordinate with multi-disciplinary engineering teams to confirm component locations and develop models for:
• Electrical brackets
• Cable trays
• Enclosures and mounting structures
• Maintain accurate engineering documentation, drawing control, and version management
• Work effectively with offshore engineering teams to support design execution
• Demonstrate strong communication and collaboration skills

Required Skills & Experience

• 5–7 years of experience as an Electrical Designer in off-highway or heavy equipment vehicle design
• Strong experience creating electrical drawings, harness layouts, and installation designs
• Proficiency in:
• SolidWorks
• AutoCAD Electrical
• Experience with 2D/3D drawing association and flattened production drawings
• Knowledge of engineering standards and best practices for electrical design
• Experience creating and maintaining BOMs and manufacturing documentation
• Ability to work collaboratively with cross-functional and offshore teams

Preferred Qualifications

• Experience working on construction, mining, or off-highway equipment
• Familiarity with electrical fitment of brackets, trays, and enclosures
• Bachelor’s or Master’s degree in Electrical, Mechanical, or related Engineering discipline

Job Overview

The Turnaround QA Technicians act as the primary interface between contractor QC inspectors, QA Coordinators, and other members of the turnaround team. Their main duty is to monitor contractor performance in the field—helping ensure the quality of work meets plant expectations.

Day-to-Day Responsibilities

• Spend 80% of the day in assigned areas observing contractor activities.
• Audit contractor flange inspections for proper execution by Qualified Flange Inspectors.
• Audit contractor flange make-up to ensure compliance with the Site Flange Makeup Procedure.
• Audit contractor work for adherence to plant procedures, EMETL practices, and pipe specifications.
• Spot check materials (nuts, bolts, gaskets, piping, valves, etc.) for correct installation and green PMI tags. If not PMI’ed, items must be re-verified or replaced.
• Ensure proper material handling and storage as per G8S-6500-10 (“Welding Material Control”), G8S-6500-11 (“Materials Segregation”), and contractor’s TA Quality Plan.
• Spot check leak detection tubing installation.
• Validate completion of touch-up/repair painting; ensure contractor QCs are tracking repairs.
• Assist inspectors with photos, documentation, etc., at hold or witness points as needed.
• Verify that contractor quality checklists and reports are completed and submitted according to the TA Quality Plan.
• Review documentation upon completion, organize field walks and sign-offs per the RTO process, and collaborate with contractor QA representatives to close punch lists.
• Learn and verify tubing fitting assembly; ensure correct procedures are followed.
• Cooperate with QAQC team and TACs for RTO systems/jobs; organize field walks and log deficiencies.
• Forward documents requiring archiving to the TA documenter.
• Generate non-conformance reports for deviations from plant or contractor practices, specifications, procedures, or TA Quality Plans.
• Update the Quality Team shift activity log for effective communication across shifts.
• Comply with all EH&S and LHC TA Safety Plan requirements.

Required Qualifications

• 2–5 years of chemical plant and skilled craft experience
• Basic computer skills (Outlook, Word, Excel, Internet Explorer, Access)
• Ability to work effectively in a team; good interpersonal skills
• Strong written and verbal communication skills
• High school diploma or GED required
• Current, valid US driver’s license
• Willingness to adhere to all safety policies—including smoke/tobacco and drug-free workplace
• Self-starter with the ability to prioritize and multi-task
• Ability to work within an empowered team environment
• Familiarity with SAP, CPPS, site equipment/drawing files, and TA work processes/procedures is helpful but not required

Summit Technology Services has a long term contract for a Production Operator in Skaneateles, NY

Job ID S-BH29824

Description of Assembly duties:

• Assemble small component parts or sub-assemblies using basic tools such as screwdrivers, clamps, exacto-knives, Allen wrenches, tweezers, wire cutters or cotton swabs.

• You may be expected to work using a microscope or magnifying equipment to perform intricate sub-assemblies.

• The ability solder and/or learn to solder is a requirement.

• Must have good manual dexterity and eyesight. Must be able to read, write and use basic math; maintain a high degree of accuracy in performing repetitive tasks; work with basic chemicals.

• Work well in a fast-paced team environment.

• Can follow instructions and keep quality and safety standards high.

1st Shift Hours: 7AM-3:30PM OT required based on business needs.

This will be a combination of Assembly (90%) and Material Handling (10%)

Please send your availability and resume

Visit us:

WESTPORT AXLE CO, a subsidiary of Universal Logistics Holdings, Inc. is a leading transportation and third-party logistics provider (3PL) that offers a broad scope of services throughout the entire supply chain. Westport's experienced management team, with its state-of-the-art technology, provides customized logistics solutions to its customers resulting in proven efficiencies and savings.

This operation supports a full range of our value added services. We manage and operate a warehouse facility which encompasses: Picking, Packing, Storage, and Shipping of automotive parts and equipment. This operation ships to various dealers, warehouses, and distribution facilities - as well as direct to the assembly line in a Just-in-Time (JIT) capacity.

Schedule:

Tuesday - Friday from 6:00pm - 4:00am (B-Crew)

Responsibilities will include but not be limited to:

• Inventory control and cycle counts
• Managing materials and maintaining records
• Prepare reports on inventory levels, usage and trends
• Quality and safety compliance; involving company policies and procedures
• Interacting with the customer on a daily basis, and ensuring customer satisfaction
• Other tasks delegated by the management

The ideal candidate should possess the following:

• Experience in a warehousing, distribution or transportation environment
• Bachelor’s or Associate’s degree preferred
• Effective oral and written communication skills
• Strong computer skills, including knowledge of Microsoft Office
• Problem solving and analytical skills, as well as a strong attention to detail
• Strong work ethic, ability to multitask
• A competitive and career oriented mindset

Airgas is Hiring for a Welding Repair Technician, Woodville or Seattle WA!

At Airgas, we are committed to building a diverse and inclusive workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world.

We are looking for you!

$27-$34

Recruiter: Tina Kratochwill

Job Description

Welder Repair to service and maintain engine-driven and electric welders and related equipment while ensuring a safe work environment. This role involves repairing, testing, and maintaining equipment, ordering parts, and performing preventative maintenance, etc.

Essential Duties and Responsibilities:

• Responsible for adherence to company policies including safety and the use of personal protective equipment.
• Repairs and refurbishes all Electric and Engine Drives.
• Assembles electric, diesel, gas, and propane equipment for rental.
• Tests and calibrates machines to see if they are functional for rent or sale.
• Repaints parts, touches up paint, and puts decals on welders to maintain general appearance.
• Replaces defective parts and completes preventative maintenance required.
• Orders parts as required in order to complete repairs.
• Inspects returned equipment for proper operation and/or damage by the customer.
• Operates a forklift, pallet jack or other necessary equipment to stock required parts in the shop.
• Ensures a clean and organized work environment at all times.
• Prepares and completes paperwork for all machine repairs.
• Occasionally required to service equipment and customers off-site.
• Maintains communication with all branch personnel.
• Occasionally advises customers regarding best equipment for their projects.
• Airgas associates are expected to act with care, adapt to our environment and engage to trust and
• grow - core tenets within the Be, Act, Engage framework of employee performance.
• All employees are expected to perform any reasonable work request that falls within the qualifications but not specifically described.

REQUIRED KNOWLEDGE, SKILLS AND ABILITIES (KSA's)

• Maintains a valid drivers’ license and a good driving record to comply with Airgas driver qualification policy for operating an Airgas vehicle in the field as necessary.

Required Education:

• Post-secondary education equivalent to a one year Technical College or equivalent is an asset.

Required Length and Type of Experience:

• At least 3 years of Mechanical Knowledge preferred
• Working knowledge of positioning equipment, welding application and equipment is preferred.
• SAP or similar software system experience.
• Intermediate skills operating a computer in Google Workspace is recommended.

WORK ENVIORNMENT

• Because we are committed to our drivers and their safety, Airgas has a video driver safety program that is used to help reduce the risk of collisions and injuries to you and the community. Our program also helps us protect associates and the company from fraudulent claims.

GRAMMER is specialized in developing and manufacturing components and systems for car interiors as well as driver and passenger seats for off-road vehicles, trucks, buses, and trains.

As a global partner to the vehicle manufacturing industry, we are represented around the world by our two divisions, Automotive and Commercial Vehicles. Our employees are constantly engaged in developing and producing innovative, flexible solutions to meet challenges in today’s competitive global market. GRAMMER can be found on four continents with more than 50 production, distribution and logistics sites in 20 countries.

GRAMMER is a leading North American full service automotive supplier of highly engineered thermoplastic components and assemblies for interiors and air and fluid management systems.

Culture:

Here at GRAMMER, we foster a culture that embraces our Grammer CODE: Collaborate in an inclusive environment, Openness in communication and ideas, Drive for results with energy and Empower yourself and others by taking ownership of decisions and actions.

What we are looking for:

Grammer is looking for a Material Planner to join our MP&L team in Delphos, OH. The ideal candidate will enjoy working in a team environment. This individual will have an opportunity to make lasting and positive changes in our team!

What you will be doing:

• Take proactive initiative, display the ability to gather, analyze, and strategically utilize data for the resolution and prevention of MP&L related challenges.
• Analyzes customer releases, ensure accurate data transfer among internal teams, customers, and suppliers as needed
• Daily System/SAP maintenance, data entry, and strategic use of SAP to ensure Grammer goals are met in addition to departmental and company continuous improvement.
• Analyze production schedules, inventory reports, and work orders to determine type and quantity of materials required, availability of stock, and order priority.
• Collaborate with Production team members to determine overdue material and parts and to inform necessary parties of current or potential challenges in material flow/supply.
• Proactively align cross-functionally to expedite efficient movement of materials within the facility to ensure utilization of best practices and reduction of waste.
• Examines materials received, verifies material/parts numbers and checks discrepancies such as damaged or unmarked parts.
• Monthly analysis and reporting of supplier delivery and customer delivery performance.
• Interfaces with suppliers and customers as needed to ensure smooth and accurate deliveries.
• Coordinate and track shipments with transportation companies as well as navigate Customs.
• Perform inventory cycle counts and assist in investigating and providing solutions for inventory discrepancies.
• Other duties assigned by management or duties necessary to maintain smooth operations of the company.

What you will bring along:

• Bachelor’s degree in related field preferred
• 3 years of experience in a similar role
• Commercial vehicle manufacturing experience or experience in a related manufacturing facility /industry
• Experience with ISO9000
• Excellent analytical, prioritization, organization, and communication skills
• Strong organization skills and ability to navigate ambiguity.
• Effective communication skills, both verbal and written
• SAP knowledge/experience developed through regular use
• Proven ability to prioritize tasks effectively and to pivot as needed when urgent matters arise
• Proven ability to solve practical and complex problems and an analytical and strategic mindset
• Ability to frequently walk the facility to audit/count material, lift/move up to 25 pounds frequently and occasionally lift/move up to 50 pounds.

What we can provide you:

• Medical, Dental, and Vision coverage eligibility on day 1
• Flex Spending Accounts
• Health Savings Account
• 401(k)
• Volunteer Life Insurance options
• Critical Illness and Accident Insurance
• Tuition Reimbursement Programs
• Robust Employee Assistance Program Services
• Individualized Developmental Opportunities