Jobs in Eastvale, CA

Full-time, exempt position located at Corona Regional Medical Center in Corona, CA. Under the direction of the Chief Executive Officer and the Chief Medical Officer, the Director of Medical Staff Services oversees all internal and external activities of the Medical Staff and is responsible for all operational aspects of the department, including organizing and conducting programs and establishing procedures for medical staff functions. Responsible for maintaining federal, state and other licensing regulatory standards. Coordinates meeting agendas, minutes and follow-up. Acts as liaison between administration and hospital medical staff. Supervises Medical Staff personnel.

The tradition of caring that culminated in the establishment of Corona Regional Medical Center began in 1965, with the founding of Corona Community Hospital. Since that time the hospital has changed to meet the needs of the rapidly growing community. Corona Community Hospital merged with Circle City Medical Center in 1992 and the resulting entity became Corona Regional Medical Center. The merged hospitals are now a 238-bed community hospital network comprised of a 160-bed acute care hospital and a 78-bed rehabilitation campus. It is certified by The Joint Commission, employs more than 1,250 trained healthcare workers and has a medical staff of approximately 347 physicians representing more than 40 specialties.

About Universal Health Services: One of the nation's largest and most respected providers of hospital and healthcare services, Universal Health Services, Inc. (UHS) has built an impressive record of achievement and performance. During the year, UHS was again recognized as one of the World's Most Admired Companies by Fortune; and listed in Forbes ranking of America's Largest Public Companies. Operating acute care hospitals, behavioral health facilities, outpatient facilities and ambulatory care access points, an insurance offering, a physician network and various related services located all over the U.S. States, Washington, D.C., Puerto Rico and the United Kingdom.

Qualifications

Education/Training/Experience: Bachelor's degree from an accredited College or University in related field required. Master's degree from an accredited College or University in related field preferred. Five (5) to Seven (7) years of experience in Medical Staff Services required. Minimum 3 years leadership experience in Medical Staff Services required, acute care experience preferred. Regulatory and Accreditation knowledge, critical thinking, attention to details, organization and time management skills are essential.

Certifications/Licenses: Certified Professional in Medical Services Management (CPMSM) Certified Provider Credentialing Specialist (CPCS) preferred.

EEO Statement: All UHS subsidiaries are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates. UHS subsidiaries are equal opportunity employers and as such, openly support and fully commit to recruitment, selection, placement, promotion and compensation of individuals without regard to race, color, religion, age, sex (including pregnancy, gender identity, and sexual orientation), genetic information, national origin, disability status, protected veteran status or any other characteristic protected by federal, state or local laws. We believe that diversity and inclusion among our teammates is critical to our success.

Avoid and Report Recruitment Scams: At UHS and all our subsidiaries, our Human Resources departments and recruiters are here to help prospective candidates by matching skill set and experience with the best possible career path at UHS and our subsidiaries. During the recruitment process, no recruiter or employee will request financial or personal information (e.g., Social Security Number, credit card or bank information, etc.) from you via email. Our recruiters will not email you from a public webmail client like Hotmail, Gmail, Yahoo Mail, etc. If you suspect a fraudulent job posting or job-related email mentioning UHS or its subsidiaries, we encourage you to report such concerns to appropriate law enforcement. We encourage you to refer to legitimate UHS and UHS subsidiary career websites to verify job opportunities and not rely on unsolicited calls from recruiters.

Our internship is designed for candidates who are sales oriented and interested in sales or management. Our highly structured 10-12 week introductory course is paid and will provide candidates a working knowledge of the industry by exposing them to all aspects of the electrical distribution field through a combination of mentoring and on-the-job training. The program requires a strong commitment from each participant and encompasses, but is not limited to, warehouse operations, shipping and receiving, counter sales, sales and interpersonal skills, customer relations and CED business philosophy. Our interns will have the opportunity to work on special projects such as market sales or customer analysis, as well as, other projects custom designed by the management team and the intern.

Reports to: Profit Center Manager

Minimum Qualifications:

• Must be at least 18 years of age
• Current, valid driver's license with acceptable driving record
• Authorization to work in the United States (without requiring work authorization sponsorship by CED now or in the future)

Preferred Qualifications:

• Strong negotiation skills
• Proficiency with Microsoft Office Suite software
• Detail oriented
• Ability to solve problems
• Must be a self-starter who can handle a heavy volume of work and be able to handle multiple tasks at the same time

Working Conditions:

Conditions vary based on the intern's current segment of the training and will include warehouse, office and external environments. During some segments, activities will include lifting, sorting, standing, possible extreme heat/cold conditions. Office segments may include sitting for extended periods.

Supervisory Responsibilities: No

Essential Job Functions:

• Learning all aspects of the CED business
• Communicating both written and spoken in English.

CED is an Equal Opportunity Employer - Disability | Veteran

Compensation Range: The compensation range for this position is $18 to $20 hourly.

Pay: $100,000.00 - $200,000.00 per year

Why This Is a Great Opportunity

• Join a respected litigation team with a long-standing reputation for strong results in complex, high-exposure matters.
• Get meaningful hands-on experience with substantive litigation work, not just support tasks.
• Work alongside seasoned trial lawyers who value strong writing, sound judgment, and real courtroom readiness.
• Be part of a growing team that is hiring more than one attorney, creating room for long-term growth.
• Step into a hybrid role that offers flexibility while still providing mentorship, collaboration, and exposure.

Location: Hybrid role based in Anaheim, California, with in-office collaboration and flexibility depending on experience level. The firm’s posted role is hybrid, and the office is in Anaheim.

Note: Must be admitted to the California Bar and able to commute to Anaheim; no relocation assistance is offered. The client said the ideal experience level is 3 to 5 years, though they will consider candidates outside that range.

About Us

We are a California civil litigation firm known for handling complex, high-exposure matters with skill, discipline, and strong client service. Our team has built a respected reputation through strategic case handling, trial readiness, and long-standing client relationships. Confidential Employer.

Job Description

• Handle litigated and non-litigated civil matters, with an emphasis on insurance defense and catastrophic or high-exposure claims
• Draft pleadings, motions, discovery, legal research, and case strategy memoranda
• Take and defend depositions, including expert and percipient witnesses
• Participate in court appearances, hearings, mediations, and trial preparation
• Evaluate liability, damages, and exposure and help develop practical defense strategies
• Work closely with partners and other attorneys on case posture, client reporting, and resolution strategy
• Manage files proactively from intake through resolution
• Collaborate with a team that values strong advocacy, professionalism, and sound judgment

Qualifications

• J.D. and active California Bar admission
• 3+ years of litigation experience preferred; insurance defense, casualty, coverage, or bad faith experience is a plus
• Strong legal research, writing, oral advocacy, and analytical skills
• Experience with discovery, depositions, motions, and case management
• Organized, motivated, and able to work well both independently and as part of a team
• Trial prep or courtroom exposure is a plus

JPC-781

Job Type: Full-time

Benefits:

• Dental insurance
• Paid time off
• Retirement plan
• Vision insurance

Who is HealthTrackRx?

HealthTrackRx is the nation's leading PCR-based infectious disease laboratory! By delivering next morning results to healthcare providers nationwide, HealthTrackRx is the premier option for patients and healthcare professionals and in an exciting phase of growth!

About the Role:

• The Territory Service Specialist onboards newly generated accounts in a predetermined

geographic territory. Primary focus being outpatient clinics who see a high volume of

infections. Key responsibilities include educating, servicing, and training existing customers on

company offerings. Identifies new business opportunities by developing existing relationships

and cold calling prospective accounts. Assists the Territory Sales Director in assigned territory

as needed.

Essential Responsibilities/Duties:

• Travels throughout assigned territory under direction of the VP of Sales to call on current customers and to solicit new and profitable business
• Responsible for assisting in growth of new and current business
• Schedule and execute in-service training at customer sites
• Train clinic staff in proper processing of requisitions and sample collection procedure
• Ensure all customers are adequately always stocked with appropriate supplies
• Plan and execute visits to existing accounts in the territory on a regular basis
• Identify, communicate, and help resolve any service issues, billing issues or customer complaints
• Schedule and/or arrange UPS/FedEx/Courier pick-ups from offices
• Depending on location travel required up to 50%

Role Highlights:

• Earnings Year 1 with only Existing Business Annualized and Base (not including New Business Growth or Car/Cell Allowances): ~$142.4k
• Earnings Year 1 All-In On Target (Not Including Car Allowance): ~$156k
• Base plus Uncapped Commission with Existing Business coming through territory
• This role is a GREAT opportunity to break into the medical sales industry!

Qualifications:

Education –

• Bachelor’s degree in business or relevant field of study; or an equivalent level of education and experience

Competencies/Skills –

• Able to independently research, organize, multitask, and prioritize work
• Exceptional verbal/ written communication skills

Experience –

• ~1+ years documented successful sales numbers, B2B, or medical sales
• Prior sales or customer service functions

If interested in the position, feel free to email your resume directly to (Please specify what location/territory you're applying for) and I'll be sure to follow up as soon as possible!

Empire Elite Marketing is an innovative sales and marketing company that provides exceptional sales and marketing services for our clients within their top retail locations. The Sales Representative is responsible for gaining knowledge of all company functions, including marketing, sales, and day-to-day business operations. We offer paid comprehensive training, and professional development opportunities to prepare our Sales Representatives to advance within our company.

This role is vital in meeting our clients’ customer acquisition goals by utilizing face-to-face marketing, and promotional events to generate new business and leads.

Essential Duties & Responsibilities:

• Identify and approach potential customers through face-to-face interactions in designated areas.
• Develop and maintain relationships with customers to foster trust and loyalty.
• Conduct presentations and demonstrations of products/services to prospective clients.
• Understand customer needs and recommend appropriate products or solutions.
• Meet and exceed sales targets and performance goals.
• Provide exceptional customer service and resolve any issues that arise.
• Maintain an in-depth knowledge of the company's products, services, and promotions.
• Attend and participate in training sessions and team meetings.

Qualifications:

• Must have a willingness to learn
• Strong analytical thinking skills

Perks & Company Culture:

• Professional travel opportunities
• Leadership workshops and development opportunities
• Paid training and performance-based promotions
• Weekly hourly pay
• Opportunities to grow within business
• Team building events
• Philanthropic opportunities

Job description:

Overview

The Engineer/Programmer is responsible for preparing and validating PCB fabrication and assembly data packages while also programming and supporting production equipment across Adura’s SMT, inspection, and electrical test platforms.

This role bridges design-to-manufacturing execution by converting customer data into production-ready CAM outputs and machine programs for SMT lines, AOI, X-ray, and Flying Probe systems. The position plays a critical role in enabling high-reliability thermal PCB-A production for Automotive, Medical, Defense, and Aerospace markets.

Key Responsibilities

CAM & DFM Responsibilities

• Review customer Gerber, ODB++, IPC-2581, and CAD data for manufacturability
• Create panel layouts optimized for yield, SMT flow, and thermal PCB constraints
• Define stack-ups, copper weights, materials, impedance requirements
• Perform DFM analysis for heavy copper, metal-core, and high-power designs
• Generate fabrication drawings, drill files, and production documentation
• Manage revision control and maintain accurate data records
• Support quoting with panel yield calculations and fabrication cost drivers

Machine Programming & Production Support

• Program SMT pick-and-place machines (component libraries, feeder setup, placement files)
• Generate and optimize solder paste printer programs (alignment, offsets, stencil parameters)
• Program 3D SPI inspection parameters and board models
• Develop AOI inspection programs and tuning criteria
• Support X-ray inspection programming for void analysis and BTC/QFN inspection
• Create and validate Flying Probe test programs for electrical verification
• Assist in NPI builds by debugging programs and optimizing cycle time
• Maintain component libraries and machine databases
• Collaborate with Process Engineering to optimize placement strategy and throughput

Requirements

• 3+ years experience in PCB CAM and SMT manufacturing environments
• Proficiency with CAM350, Genesis, or equivalent CAM software
• Hands-on experience programming SMT equipment (printer, pick-and-place, AOI)
• Familiarity with X-ray and Flying Probe programming environments preferred
• Strong understanding of PCB stack-ups, thermal materials, heavy copper routing
• Experience with high-mix / low-to-medium volume production environments
• Strong documentation and attention to detail
• Ability to troubleshoot machine programs and support production ramp-up

Ideal Candidate Profile

• Comfortable moving between CAD data and production floor
• Strong problem-solving mindset
• Detail-oriented but production-focused
• Understands impact of programming decisions on yield and cycle time
• Familiar with IPC Class 2/3 environments

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Experience:

• SMT Programming: 2 years (Required)
• CAM programming: 1 year (Required)
• electronics manufacturing: 1 year (Required)

Work Location: In person

About the Company

American Fidelity Assurance is now looking for an Account Manager (Outside Sales Rep) in Riverside County. Our salaried account managers are responsible for selling benefits, retirement, and other supplemental insurance products and services in a defined sales territory serving an existing customer base of K-12 public schools. You will build strong, long-term relationships and develop specific, needs-based recommendations for their employees, highlighting the benefits of American Fidelity's insurance portfolio.

We Offer

• Base salary + uncapped commission + additional bonus potential
• Company car, company credit card and paid travel expenses.
• International sales award trips
• Average first-year income is between $87,000 to $119,000.
• 100% match when contributing 6% to your 401(k), with more matching opportunities after five years
• You will have a defined territory
• Multiple sales career path options
• Consistent, standardized training designed for new Account Managers
• Comprehensive benefits package includes medical, dental, vision and supplemental insurance plans.

Primary Responsibilities

Focus on growing and maintaining existing business-to-business accounts by directly selling insurance products and services to public school districts. Consult with current customers to provide value and meet financial needs. Build strong relationships with customers and association executives. Develop customized needs-based employee benefits packages through annual benefit enrollments, group presentations, and new account development opportunities.

Defined Territory – Each Account Representative is assigned a territory to manage and develop new accounts. Overnight Travel is Required. Must reside in the specific territory.

Extended Training Program—Account Representatives participate in a structured, comprehensive training program that includes on-the-job training within their territory, product & sales schools, and online training.

Company Overview

Founded in 1960, American Fidelity Assurance Company is a private, family-owned company specializing in the education, public sector, automotive and healthcare industries with products like group and individual life, health and annuity services as well as other financial security products and services.

For more information on our company, visit .

A Great Place to Work for All

American Fidelity is a certified Great Place to Work for All by the consulting company Great Place to Work. Being a salesperson is a challenging career, but it’s a lot easier when you enjoy coming to work and believe in what you’re selling. That’s why at American Fidelity we offer products designed to help people. We train our Sales Colleagues to serve as consultants who help people decide which products are best for them – and which aren’t. Being honest and transparent is a huge part of our culture – and that extends to our relationships with customers and policyholders. Being a Great Place to Work for All is another driver of our culture, and we are committed to creating an inclusive environment where everyone's voice is valued and respected.

If you'd like information about American Fidelity's privacy practices, please visit /privacy.

Remote / Field-Based | $80K Base + Commission | Car Allowance

Our team is partnering with a fast-growing automotive solutions company to hire a results-driven Account Executive supporting the West Coast market. This is an exciting opportunity to represent premium dealership products while building long-term relationships and driving territory expansion.

Why This Opportunity Stands Out

• Growth-focused organization with genuine career development pathways

• Direct exposure to senior leadership and strategic initiatives

• $80,000 base + monthly commission (OTE $90,000–$110,000+)

• Full benefits package

• Car allowance ($750/month)

• Remote, field-based role with strong territory upside

• Represent a premium suite of vehicle protection solutions trusted by leading dealerships

About the Opportunity

Our client is a respected partner to automotive dealerships and warranty administrators, delivering vehicle protection programs and sales solutions designed to drive revenue, retention, and customer satisfaction. Their product portfolio combines performance, protection, and customization, supported by training, marketing resources, and hands-on operational support.

This is an ideal role for a motivated sales professional who enjoys a mix of account management, dealership support, and new business development.

Day-to-Day Responsibilities

In this territory-based role, you will expand and maintain dealership relationships while driving new partnerships across your region.

Your week will typically include:

• Delivering dealership training on product knowledge, sales approach, and program best practices
• Supporting dealership operations and ensuring program success through ongoing service and communication
• Managing existing accounts and strengthening relationships with dealership leadership and staff
• Prospecting new dealership opportunities and actively closing business
• Preparing proposals and responding to partner inquiries
• Reviewing account performance data and collaborating with leadership on growth strategies
• Supporting product launches, marketing initiatives, and merchandising placement
• Reporting activity through CRM and participating in weekly strategy meetings

This role balances relationship management (approximately 50%) with new business development (approximately 50%).

What We’re Looking For

• Bachelor’s degree preferred
• 3+ years of territory sales, field sales, or account management experience
• Comfortable with travel, including daily driving and about one overnight per week
• Experience with cold outreach, prospecting, or hunter-style sales activity
• Strong communication, training, and relationship-building skills
• Self-driven professional who thrives in an autonomous, field-based role

Schedule & Location

• Remote / work from home

• Field travel throughout assigned West Coast territory

If you’re looking for a role where you can own a territory, work directly with leadership, and represent high-value automotive solutions, we’d love to connect.

Uncapped Earnings for Relentless Sales Pros: Become an Independent Sales Rep with Schaeffer Manufacturing!

Are you built for the hunt, genetically wired to win, and ready to command your own high-income destiny?

Schaeffer Manufacturing Company —a top provider of premium lubricants, synthetic oils, and advanced fuel additives — is looking for hungry, aggressive outside sales professionals driven to dominate their territory and maximize commissions.

If you want the freedom to run your own business and earn what you’re truly worth, keep reading.

What You’ll Be Selling—and To Whom:

• Our products: Premium lubricants, synthetic oils, and cutting-edge fuel additives trusted for performance, durability, and real ROI.
• Your targets: You’ll sell directly to front-line, equipment-dependent clients—farmers, independent truckers, construction crew owners, mining operations, excavators, manufacturers, forestry managers, industrial accounts, and even racing teams. If it rolls, hauls, digs, conquers terrain, or runs machinery, it NEEDS what you’ll offer.

Compensation:

• True uncapped, commission-only upside (1099 contractor)—your effort, your fortune, no limits.
• Monthly and year-end bonuses for high-performance reps.

Unmatched Support:

• Comprehensive onboarding: Online, live, and hands-on field training kicks off your success.
• On-demand backup: Tech and sales support teams respond instantly, so you’re never hung out to dry.

Who Succeeds Here:

• Aggressive, highly motivated entrepreneurs who want the ball in their hands.
• Natural hunters ready to chase down new clients, close hard, and build a book that pays for years.

Many of our top-producing reps say their only regret is not joining Schaeffer sooner. If you’re searching for unlimited opportunity selling proven, high-value products to real-world businesses, this is your moment.

Ready to OWN your income and your market?

Apply today to join Schaeffer Manufacturing Company.

Company Profile

SoCal JCB is a highly successful, fast-growing business We pride ourselves in customer service. We invest in our workforce and offer a highly competitive compensation and benefit program. SoCal JCB is an authorized dealer for JCB construction equipment including skid steer loaders, backhoe loaders, wheel loaders, excavators and telehandlers.

Position Type: Exempt

Location: 2860 S Iowa Ave, Colton, CA 92324.

Minimum Qualifications

• Proven experience in inside sales
• Strong customer service skills and a customer-centric approach
• Excellent communication skills, both verbal and written
• Ability to multitask, prioritize, and manage time effectively
• Proficient in using CRM software and MS Office Suite
• Strong problem-solving skills and attention to detail
• Ability to work independently and as part of a team

Preferred Qualifications

• At least 2 years of parts and/or service experience in the heavy equipment industry
• Bilingual – English and Spanish

Responsibilities

• The successful candidate will play a key role in driving sales and building strong relationships with customers in the industry
• This role involves handling inbound and outbound sales inquiries, providing product information, and closing sales
• Respond to inbound sales inquiries via phone, email
• Make outbound calls to prospective and existing customers
• Identify customer needs and recommend appropriate equipment solutions
• Provide detailed product information, including features, benefits, and pricing
• Prepare and process sales orders accurately and efficiently
• Follow up on quotes and leads to convert them into sales
• Coordinate with the operations team to ensure timely delivery of equipment
• Build and maintain strong relationships with new and existing customers
• Handle customer complaints and concerns with professionalism and escalate issues when necessary
• Ensure high levels of customer satisfaction through excellent service
• Maintain accurate records of customer interactions and sales activities in CRM systems
• Provide regular sales updates to management
• Stay updated on product knowledge and industry trends

JCB is an equal employment opportunities (EEO) employer in accordance with applicable federal, state and local laws. JCB complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities.

JCB is not currently hiring individuals for this position who now or in the future require sponsorship for employment visa status; however, as a global company, JCB offers many job opportunities outside of the U.S. which can be found through our website at

About Us:

Adura is a fast-growing electronics manufacturing company specializing in high-performance LED modules, drivers, and advanced thermal PCB technologies. We support leading OEMs with rapid prototyping and high-volume production, custom PCB design, and high-quality PCB assembly made in Corona, California. With over 1,000 standard LED module and LED driver products and strong global manufacturing capabilities, we help customers solve complex thermal, optical, and power challenges. At Adura, you’ll join an innovative team building the next generation of electronics for Industrial, Medical, LED Lighting, Automotive, Defense and Aerospace markets.

Overview

The PCB-A / Manufacturing Process Engineer leads the development, implementation, and optimization of Adura’s high-reliability thermal PCB, PCB-A, and integrated box-build manufacturing operations.

This role owns end-to-end process control across SMT, THT, selective soldering, vacuum/nitrogen reflow, X-ray validation, electrical test (Flying Probe), conformal coating, and full box-build / subsystem integration.

The position ensures robust manufacturing flow, yield performance, and regulatory compliance for Aerospace, Defense, Automotive, Industrial, Lighting, and Medical device programs.

Key Responsibilities

SMT & PCB-A Manufacturing

• Lead full SMT line setup including solder paste printing, 3D SPI control, reflow profiling (vacuum/nitrogen), AOI tuning, X-ray validation, and electrical test integration
• Optimize thermal PCB processes including heavy copper, metal-core, and high-current assemblies
• Establish process controls for Flying Probe electrical validation and functional testing
• Drive yield improvement, scrap reduction, and cycle-time optimization
• Develop PFMEA, control plans, DOE, SPC/CPK strategies

Box Build & Subsystem Assembly

• Design and implement scalable box-build manufacturing flow for complete electronic subsystems
• Develop mechanical assembly processes including torque control, harness integration, connectorization, and enclosure assembly
• Establish ruggedization processes including conformal coating, potting, sealing, and environmental protection
• Define functional test protocols for integrated subsystems
• Support builds of aerospace control modules, defense electronics assemblies, industrial power systems, medical device subsystems, and high-performance lighting modules
• Ensure full material traceability and serialized tracking at subsystem level

Compliance & Regulated Markets

• Ensure compliance with IPC Class 2/3 standards
• Support and maintain ISO 9001 certification
• Drive readiness for AS9100 (Aerospace), IATF 16949 (Automotive), and ISO 13485 (Medical)
• Collaborate with Quality on audits, corrective actions, and documentation control
• Establish validated manufacturing processes suitable for regulated markets

NPI & Equipment Leadership

• Lead NPI builds and process validation for new product introductions
• Evaluate and implement new equipment, tooling, automation, and production upgrades
• Oversee thermal profiling, stencil design, panelization optimization, and assembly fixturing
• Train and mentor operators and technicians on advanced manufacturing controls

Requirements

• 7+ years of experience in EMS / PCB-A manufacturing
• Extensive hands-on SMT setup experience (SPI, AOI, reflow profiling, X-ray validation)
• Experience with Flying Probe or ICT testing environments
• Experience implementing or managing box-build and subsystem integration lines
• Strong knowledge of thermal PCB materials, heavy copper, and metal-core assemblies
• Experience working in Aerospace, Defense, Automotive, Lighting, or Medical device environments
• Strong background in Lean, Six Sigma, SPC, PFMEA, and DOE
• BS in Electrical, Mechanical, or Manufacturing Engineering preferred

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Company Profile

SoCal JCB is a highly successful, fast-growing business We pride ourselves in customer service. We invest in our workforce and offer a highly competitive compensation and benefit program. SoCal JCB is an authorized dealer for JCB construction equipment including skid steer loaders, backhoe loaders, wheel loaders, excavators and telehandlers.

Position Summary

SoCal JCB currently has an opening for a Territory Sales Representative to support our machine sales coverage. This position is responsible for providing exemplary customer satisfaction to assigned accounts through the sale of products and services offered by SoCal JCB. The Sales Representative will serve as the primary liaison between SoCal JCB and the customer.

Position Type: Exempt

Major Tasks, Responsibilities & Key Accountabilities

• Develop sales opportunities by researching and identifying potential accounts, soliciting new accounts, building rapport, providing technical information and explanations and preparing quotes.
• Build relationships with customers quickly and in a mutually beneficial manner.
• Listen to and engage every customer to obtain sufficient information to correctly determine or confirm his/her requests.
• Answer customer questions regarding products, prices, availability, product uses and rental policies.
• Fulfill requests promptly and accurately, in line with company procedures.
• Obtain customer information such as name, address and payment method. Enter orders into database.
• Create quotations and maintain records of contacts, accounts and orders.
• Consult with clients after contract signings to resolve issues and provide ongoing support.
• Knowledge of products to troubleshoot machine issues over the phone.
• Ensure showroom, equipment, displays, counters, and signs are clean, well-stocked, orderly and attractive.
• Aid in the schedule and dispatch of deliveries.
• Work with team members to ensure high quality work and the best possible customer experience
• Maintain CRM database, knowledge of Sales Force a plus

Minimum Requirements

• High-dollar, high-volume sales experience
• Experience with customer negotiations
• Prior territory management experience preferred
• High energy, excellent communication skills, and a strong work ethic required
• Leadership Skills a strong plus for future growth opportunities
• Self-Improvement skills and set high standards for personal performance
• Excellent customer service skills
• Ability to perform at a high capacity in fast paced environment
• Must pass any drug screens and background checks

Preferred Qualification

• Bilingual (English and Spanish)

SoCal JCB is an equal employment opportunities (EEO) employer in accordance with applicable federal, state and local laws. JCB complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities.

Eleven Recruiting is searching for a Project Engineer to join one of our largest and most advanced aerospace and defense partners, sitting onsite in Corona, CA. This company plays a key role in designing, developing, and manufacturing critical flight and defense hardware supporting next-generation launch vehicles, spacecraft, and hypersonic systems.

The Project Engineer will serve as the technical and program execution lead, managing multiple engineering programs from concept through production. This individual will collaborate cross-functionally across engineering, operations, and quality teams to ensure products meet technical, schedule, and performance requirements. The ideal candidate will bring a strong mix of technical depth, organizational leadership, and hands-on program management experience to drive excellence throughout the product lifecycle.

Responsibilities:

• Develop, manage, and execute comprehensive project plans—including schedules, budgets, deliverables, and resource allocation.
• Lead engineering design and development activities, ensuring compliance with all program, customer, and regulatory requirements.
• Coordinate across engineering, operations, quality, and supply chain to align technical priorities and deliver results on time and within scope.
• Identify and mitigate project risks, ensuring technical integrity and schedule performance.
• Serve as the primary liaison between internal teams and customer engineering groups to ensure clear communication and alignment on technical deliverables.
• Prepare and deliver project status updates, performance metrics, and milestone reviews to leadership and external stakeholders.
• Ensure all project work adheres to AS9100, ITAR, and other applicable aerospace standards.
• Support manufacturing readiness reviews, design for manufacturability improvements, and product transition to production.
• Drive continuous improvement initiatives to enhance process efficiency, engineering accuracy, and program execution.

Qualifications:

• Bachelor’s degree in Engineering (Mechanical, Aerospace, Systems, or related discipline) required; advanced degree preferred.
• 3–7 years of progressive experience in aerospace, defense, or advanced manufacturing leading engineering or cross-functional projects.
• Proven track record delivering complex projects from concept through production while ensuring compliance with technical, quality, and schedule requirements.
• Strong understanding of aerospace manufacturing processes, including machining, composites, and assembly operations.
• Experience using project management tools such as Microsoft Project, Smartsheet, or Jira.
• Knowledge of configuration management, documentation control, and compliance frameworks (AS9100, ISO, ITAR).
• Excellent communication and collaboration skills with the ability to interface effectively across engineering, operations, and leadership teams.
• Strong analytical and organizational skills with the ability to manage multiple priorities in a fast-paced environment.

Preferred Experience:

• Experience leading new product development (NPD) or sustainment engineering programs within aerospace or defense.
• Familiarity with CAD/PLM systems such as CATIA, NX, SolidWorks, or Teamcenter.
• Exposure to hypersonic structures, launch vehicle assemblies, or propulsion systems.
• Understanding of Earned Value Management (EVM) principles or equivalent program performance tracking methodologies.

Senior Sales Executive (Hunter)

Location: Corona, California

Employment Type: Full Time, Direct Hire

Industry: Managed Service Provider (MSP) and MSSP

Focus: New Logo Acquisition, SMB and Mid-Market B2B

About the Role

Our client, a growing Managed Service Provider based in Corona, California, is seeking a Senior Sales Executive with a true hunter mentality. This position focuses entirely on new business development, new logo acquisition, and expanding market presence within the SMB and Mid Market segments. The ideal candidate understands the MSP and MSSP space and enjoys consultative selling, building relationships, and closing deals that drive long term value for clients.

Responsibilities

• Identify, target, and acquire new SMB and Mid Market clients
• Build and manage a strong pipeline through cold outreach, networking, referrals, and proactive prospecting
• Conduct discovery calls, meetings, and presentations with senior leaders and decision makers
• Collaborate with technical teams to scope and position MSP and MSSP service offerings
• Prepare proposals, manage the sales cycle from start to finish, and close new business
• Maintain accurate pipeline forecasting and CRM documentation
• Stay informed on trends in managed services, cybersecurity, cloud, and IT solutions
• Represent the company at events, partner meetings, and industry functions to generate leads

Requirements

• Minimum of 3 to 5 years of successful hunting experience in B2B sales
• Proven track record of landing new logos in the SMB or Mid Market space
• Experience working within or selling into the MSP or MSSP ecosystem is strongly preferred
• Strong communication, negotiation, and presentation abilities
• Ability to manage full cycle sales independently
• Familiarity with CRM systems and structured sales processes
• Self driven, competitive, and comfortable in a performance based environment
• Ability to meet clients in person across the Inland Empire and Orange County areas

Compensation

• Competitive base salary
• 150,000 dollar On Target Earnings
• Unlimited commission potential based on sales performance
• Additional incentives available for exceeding performance goals

What We Are Looking For

• A motivated sales professional who loves building relationships, uncovering needs, and winning new business. Someone who understands the MSP model and thrives in an environment that rewards effort, persistence, and results.

At CGH we are seeking motivated professionals to join our growing sales team. Whether you’re looking for a full-time career path or part-time flexibility, this role offers comprehensive training from top-performing sales leaders and a steady stream of qualified leads (no cold calling).

You will have the opportunity to build strong client relationships, provide personalized life insurance solutions, and grow your income potential in a supportive, tech-enabled environment.

Licensing support is provided for candidates not yet licensed.

Ideal Candidates:

• Previous experience in sales (insurance, finance, real estate, or related fields)
• Strong communication and relationship-building skills
• Self-driven and goal-oriented, with a desire to grow professionally
• Comfortable using digital tools to manage prospects and sales activity
• Willing to obtain a life insurance license (licensing assistance provided)
• Flexible availability and ability to work independently

Learn how we started!

If you’re ready to advance your career in a dynamic, high-growth industry, we encourage you to apply today.

This opportunity is only for citizens or permanent residents with independent work authorization (no work visas).

Quality Inspector CMM Programmer Anaheim, CA $30-$38/hr

Summary

The Quality Inspector will evaluate product conformity by measuring or otherwise comparing product to customer requirements, primarily using a Romer Arm, and/or CMM. Will also have programming responsibilities.

Responsibilities

• Perform visual and precision mechanical inspection of raw materials and finished products.
• Able to use standard mechanical measuring tools (Calipers, Micrometers, Plug & Ring Gages, Gage blocks, Height gage, etc.)
• Program and inspect part dimensions using Romer Arm and/or CMM.
• Ability to read and interpret engineering drawings, standards and specifications.
• Familiar with ANSI/ASME Y14.5.
• Proficient shop math skills, including some trigonometry.
• Ability to prepare and complete documentation such as inspection reports using Microsoft Excel.
• Ability to prepare and complete FAIs per AS9102 requirements
• Good communication skills and ability to coordinate interdepartmental tasks.
• Identify quality issues and recommend corrective actions
• Ability to prioritize multiple assignments and exercise independent judgment.
• All other dues and responsibilities as assigned by Supervisor.

Requirements

• High school diploma or (GED)
• Bachelor’s degree preferred
• Some aerospace QA experience required
• 2+ years mechanical inspection or quality assurance experience
• 1+ year experience using CMM or Romer Arm for part dimension inspection.
• 1+ year experience programming CMM or Romer Arm preferred.
• Knowledge of AS9100, ISO 9001:2015, Lean Manufacturing, Quality Management Systems, Root Cause Analysis is a plus
• Proficiency in English and basic computer skills, including the use of the internet and Microsoft Office
• Strong understanding of quality control standards and procedures
• Read and interpret blueprints
• Attention to detail

Hiring a Financial Counselor in Anaheim, CA!

• Fully On-Site in Anaheim
• M-F 8am-4:30pm
• 6month contract to hire

Required Skills & Experience

• Experience with insurance verification
• Strong understanding of deductibles, copays, and coinsurance
• Knowledge of authorization requirements
• Experience with claim submission and follow-up
• Understanding of payer types including Commercial, Medicare, Medi‑Cal, HMO, and PPO
• Ability to clearly explain benefits and how they impact a patient’s bill
• Comfortable collecting payments upfront and discussing financial options
• 6+ months experience in a related healthcare financial role
• High School Diploma or GED

Nice to Have Skills & Experience

• Experience in a commercial claims hospital environment
• Familiarity with claims portals or systems
• Prior experience in a high-volume call or business office setting

Job Description

The Financial Counselor supports the Business Office by managing patient financial intake and back-end claims operations. This role is primarily administrative and data-driven, with limited patient-facing interaction, and requires strong knowledge of insurance verification, claims processing, and payer requirements. Approximately 10% of the role involves patient interaction, while the majority focuses on data entry, auditing, claims submission, and high-volume inbound/outbound calls.

Supply Chain Manager:

Position Summary

The Supply Chain Manager oversees end-to-end supply chain planning and supplier execution for Developlus across demand planning, supply planning, domestic and international sourcing, vendor onboarding and management, procurement coordination, inventory management, and planning systems support. This role is accountable for building disciplined, data-driven planning routines and supplier management practices that support rapid growth, increasing channel complexity, and an accelerating innovation pipeline. The role works closely with Packaging Engineering and cross-functional partners to source and qualify packaging and componentry for existing items and new launches. This role does not own master production planning and does not manage warehouse operations, transportation, or order fulfillment execution.

Core Mandate

• Operate a rigorous monthly cross-functional planning cadence that aligns demand, supply, inventory, and financial targets.
• Improve service and availability through better planning signals and supplier execution, while reducing excess inventory and obsolescence.
• Lead domestic and international sourcing for existing and new items, ensuring supplier readiness to support the innovation pipeline and ongoing supply.
• Coordinate packaging and component sourcing with Packaging Engineering to ensure technical feasibility, specifications readiness, and manufacturability before launch.
• Elevate data quality, planning discipline, and decision support using Sage X3 and standardized reporting.
• Create repeatable operating rhythms with Sales, Marketing, Operations, Quality, and Finance to proactively manage risks and tradeoffs.

Key Responsibilities:

1. End-to-End Planning and Execution Leadership

• Own planning and supplier execution performance across demand planning, supply planning, inventory management, domestic and international sourcing, vendor lifecycle management, and procurement coordination.
• Serve as the day-to-day integrator between Commercial teams, Operations, Quality, Finance, and Data to ensure one aligned plan and clear priorities.
• Translate business needs into planning actions, constraints, and decisions, escalating tradeoffs and risks with clear recommendations.

2. Sales and Operations Planning and Integrated Business Planning Support

• Lead the operating mechanics of the planning process, including calendar, templates, data preparation, and cross-functional inputs.
• Facilitate monthly demand review, supply and capacity review, and inventory and working capital review, ensuring decisions and actions are documented and tracked.
• Build scenarios and quantify tradeoffs across service, inventory, lead times, and cost, surfacing gaps and risks early.
• Maintain a single set of numbers and assumptions across Commercial, Operations, and Finance, and drive follow-through on actions.
• Ensure supplier constraints, international lead times, and sourcing risks are explicitly reflected in monthly plans and launch readiness reviews.

3. Supply Planning and Capacity Coordination (Non–Master Production Planning)

• Develop feasible supply plans by translating demand plans into material and capacity requirements in partnership with Manufacturing and Quality.
• Coordinate constraints, changeover considerations, and critical material availability with Operations to support on-time production and launch readiness.
• Maintain exception-based management for shortages, long-lead materials, and capacity conflicts, driving mitigation plans and escalation as needed.
• Support long-range capacity planning inputs with supplier and material lead time intelligence, including international sourcing lead times and capacity commitments.

4. Inventory and Working Capital Management

• Own inventory health across raw materials, components, work-in-process, and finished goods from a planning and policy perspective.
• Set and maintain planning policies, including segmentation, service targets, reorder parameters, and safety stock logic.
• Drive actions to improve inventory turns and reduce slow-moving and obsolete inventory through root-cause analysis and corrective plans.
• Partner with Finance on inventory valuation drivers, reserves, and working capital reporting.

5. Domestic and International Sourcing and Vendor Lifecycle Management

• Own the end-to-end vendor lifecycle for domestic and international suppliers: identification, evaluation, selection, negotiation support, onboarding, and ongoing performance management.
• Lead sourcing for existing items and new items required to support the innovation pipeline, including primary packaging, secondary packaging, components, and contract manufacturing inputs as applicable.
• Partner closely with Packaging Engineering to ensure technical requirements and specifications are captured, suppliers are technically qualified, and packaging is compatible with product and manufacturing processes.
• Coordinate with international sourcing and procurement partners to identify overseas supplier options, manage quotation and sampling cycles, and align on commercial terms.
• Drive negotiation preparation and execution for strategic suppliers, including pricing, terms, lead time commitments, minimum order quantities, tooling timelines, quality requirements, and escalation paths.
• Establish and govern vendor onboarding standards to ensure documentation, compliance expectations, quality requirements, and systems setup are complete before go-live.
• For international suppliers, coordinate import readiness inputs such as lead time assumptions, production windows, documentation requirements, and risk mitigation plans with internal stakeholders.
• Manage supplier performance through scorecards, corrective action discipline, and regular business reviews, improving delivery reliability, responsiveness, and quality.
• Build resilience through secondary sourcing plans, risk monitoring, and contingency playbooks for critical items and launch-critical components.

6. Procurement Coordination (with Purchasing)

• Partner with Purchasing to align sourcing decisions, purchase execution, and planning signals to prevent shortages and excess.
• Standardize supplier performance expectations and escalation routines in collaboration with Purchasing and Quality.
• Support contract compliance and supplier term standardization by ensuring purchase practices align with agreed terms.
• Provide planning and supplier readiness inputs to Purchasing for new item setup, vendor creation, and purchase order standards.

7. Systems, Data, and Planning Infrastructure (Sage X3)

• Own planning data integrity and planning parameter governance within Sage X3, including lead times, order policies, and item attributes.
• Partner with Information Technology and Finance to improve planning automation, exception reporting, and decision dashboards.
• Drive data governance for bills of materials, routings, lead times, and planning parameters in partnership with cross-functional owners.
• Ensure new item and new vendor master data readiness to support launch timelines and accurate planning signals.

8. Operating Rhythm, Reporting, and Continuous Improvement

• Establish weekly and monthly operating rhythms to manage risks, shortages, supplier performance, inventory health, and launch readiness.
• Create clear reporting on plan adherence, supplier performance, inventory drivers, sourcing progress for new items, and key risks for leadership review.
• Lead continuous improvement initiatives that reduce expedite cost, improve planning accuracy, shorten supplier lead times, and improve supplier reliability.
• Document and standardize sourcing and onboarding playbooks so launches and supplier changes become repeatable and scalable.

Key Performance Indicators and Outcomes

• Forecast accuracy by channel and brand
• Service level and fill performance outcomes driven by planning and supplier execution
• Inventory turns and inventory dollars
• Slow-moving and obsolete inventory reduction
• Shortage incidence and expedite cost reduction
• Supplier on-time and complete delivery performance
• Supplier quality performance, including defect rate and corrective action closure
• Domestic and international sourcing cycle time for new items, including time from request to supplier selection and readiness
• Vendor onboarding cycle time and onboarding quality, including documentation completeness and systems readiness
• Purchase price and terms improvement versus baseline
• Secondary source coverage for critical materials and launch-critical components
• Planning master data accuracy in Sage X3

Qualifications

Required

• Seven to ten plus years of experience in supply chain planning, sourcing, procurement coordination, or inventory management in consumer products or manufacturing
• Demonstrated experience running cross-functional planning routines and aligning demand, supply, and inventory
• Experience with domestic and international sourcing, including supplier selection, negotiation support, onboarding, and supplier performance management
• Ability to coordinate packaging and component sourcing with Packaging Engineering and cross-functional partners to support new item launches
• Proficiency with enterprise resource planning systems; Sage X3 experience strongly preferred
• Advanced analytical skills and strong Excel capability; able to translate data into clear insights and actions
• Strong communication skills with the ability to influence across Sales, Marketing, Operations, Quality, Product Development, and Finance
• Structured problem-solving mindset with a track record of driving measurable improvements

Preferred

• Experience in beauty, personal care, or fast-moving consumer goods
• Experience supporting innovation launches and new item introductions
• Professional certifications in supply chain or operations
• Experience with continuous improvement methods such as Lean or Six Sigma

Job Title: Electrician IV

Location: Onsite – Norco, CA

Exp : 7+

Job Summary:

We are seeking an experienced Electrician IV to support high and low voltage electrical systems in a secure, safety-driven environment. This role requires strong knowledge of NEC and NFPA 70E standards, hands-on electrical trade expertise, and the ability to respond to emergency call-ins as needed.

Required:

• High school diploma or equivalent. OSHA 10 certification (Preferred)

Must Have:

• High school diploma or equivalent.
• 7+ years of experience in electrical trades.
• Thorough understanding of NEC and NFPA 70E requirements.
• Experience with high and low voltage systems.
• Ability to work in confined spaces, climb ladders and platforms, and meet physical/respirator requirements.
• Security Clearance required.
• Please share resumes ASAP.

Are you an ambitious Planner who is looking to fast-track their career in a rapidly growing aerospace manufacturer? Would you be able to thrive in a fast-paced, high-mix production environment? If so, this may be the career move you are searching for.

The responsibilities of the Planner role are:

• Analyze new orders to determine requirements for production
• Quotes lead time for the shipment of orders based on the availability of parts and materials
• Revise shipment dates to considering lead time required from suppliers.
• Respond to requests for expediting the shipment of orders by locating and expediting required materials through the manufacturing processes
• Coordinating the procurement of materials from vendors.
• Control the allocation of incoming parts and materials to delivery schedules
• Work within operations to communicate the status of the material whilst ensuring swift resolution of bottlenecks or delays

The background/skills required for the Planner role are:

• Bachelors degree qualified
• Four or more years of planning experience in a manufacturing environment
• Must have knowledge of MRP systems and production processes
• Must be able to work with others in resolving conflicting priorities. Excellent verbal and written communication skills
• Knowledge of ERP systems would be an advantage

The successful Planner will enjoy a highly supportive environment where they can progress their career into a Planning Manager position. They will also be involved in the manufacturing of some of the most precisely engineered aerospace components in the industry, whilst working in a world-class environment. If you are an ambitious, highly-skilled Planner who can organize production schedules in a very high-mix environment, please apply today.