Engineering Jobs in Springfield Massachusetts Remote

Sets-up and operates CNC Turning, Multi-Axis lathes, and other Turning equipment to produce highly precision component parts that meet all quality standards.

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program

Major Areas of Responsibility:

Requirements:

• High School diploma or equivalent. Technical school training a plus.
• 3 years of set-up experience minimum required
• Experience with aerospace products and/or other close tolerance parts is a plus.
• Must be familiar with Fanuc and/or Okuma Controls
• Must be able to set and change tools.
• Must be able to use standard gauges and inspection techniques.
• Experience with SPC, inspection documentation, and problem solving is a plus.
• Strong interpersonal and analytical skills.
• Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
• Must be able to read CNC programs.
• Five plus years of increasingly diverse experience in a machine shop or CNC machining environment

Physical Requirements:

• Ability to push/pull/carry up to 50 lbs.
• Able to stand for up to 8+ hours.

PI629cfb2ee342-26289-39815000

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program

Major Areas of Responsibility:

Requirements:

• High School diploma or equivalent. Technical school training a plus.
• 3 years of set-up experience minimum required
• Experience with aerospace products and/or other close tolerance parts is a plus.
• Must be familiar with Fanuc controls.
• Must be able to set and change tools.
• Must be able to use standard gauges and inspection techniques.
• Experience with SPC, inspection documentation, and problem solving is a plus.
• Strong interpersonal and analytical skills.
• Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
• Must be able to read CNC programs.
• Five plus years of increasingly diverse experience in a machine shop or CNC machining environment

Physical Requirements:

• Ability to push/pull/carry up to 50 lbs.
• Able to stand for up to 8+ hours.

PIaf5bf2804d83-26289-39677110

Job Summary:

The 2nd Shift Production Supervisor leads a multi-department team of CNC Operators and Set-Up Operators, in a high mix / low volume aerospace component manufacturing environment. This role is expected to balance expertise in set-up and operation of CNC machining for precision tolerance components, along with strong interpersonal skills to motivate the team to work toward common goals and objectives. Key responsibilities include managing the day-to-day priorities for multiple departments, cross-training staff on best practices to meet set-up and production run-times, optimizing processes through the elimination of waste, and leading lean continuous improvement initiatives. As a working supervisor, this role is expected to run production jobs and provide the necessary supervisory management to a small 2nd shift team.

This role is 100% in office at our plant in East Hartford, CT.

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO Package
• Paid Company Holidays
• 401K Match Program
• Medical, Dental, Vision Benefits
• Tuition Reimbursement/Assistance Program

Essential Job Duties:

• Conduct security, quality and EH&S audits to ensure the safety of employees on the second shift, and compliance with company and customer policies.
• Coordinate time-off requests, with attention to skills matrix, to ensure adequate staffing level across all disciplines of machine centers to meet production needs.
• Motivate team to meet daily, weekly and monthly goals and objectives. Identify waste and non-value-added tasks that interfere with objectives.
• Routinely measure, monitor, and publish the performance of all individuals on the team. Compare results against department standards. Complete periodic performance evaluations, and correct any issues in real time as needed, up to and including, disciplinary actions if needed.
• Host a daily GEMBA walk and serve as the primary conduit for all communications between operators and cross functional teams. Attend production meetings, and quality clinic/MRB meetings as needed. Collaborate with engineering, purchasing, production and sales teams to drive open issues to rapid closure.
• Partner with production control to stage daily and weekly priorities. Ensure jobs are completed on time, and productivity is sustained. Expedite jobs as necessary.
• Set-up and operate CNC machines according to operation sheet instructions. Provide technical support for team.
• Maintain ERP data integrity ensuring job punches match traveler package. Report any discrepancies that could impact job quantity or delivery.
• Develop and author standard work for the operation of production equipment. Coach and train teammates in best practices, enforcing safety, departmental and QMS polices, with the goal of process improvement, reduction in set up time, faster productivity rates, and improved quality.

Experience & Skills:

• Minimum of 10 years progressive career in the manufacturing of precision machined components in a regulated industry such as aerospace or medical. Previous experience in a high mix, low volume shop with an emphasis on lean manufacturing preferred.
• Working knowledge of ISO/AS quality standards, basic OSHA/EHS safety regulations, and a commitment to adherence of company policies.
• Advanced or expert machining skills in 1 or more disciplines. Swiss lathe, multi-axis turning, turning, milling, or grinding. Must be able to independently set-up and operate CNC equipment and provide the necessary training to others on shift.
• Experience leading and managing a small team toward common goals. An effective communicator that can build rapport with a diverse team. Previous team lead experience preferred.
• A willingness to take accountability for self and team, driving and inheriting the collective results of a department or team.
• High degree of urgency to drive operations at full speed. Keen sense of attention to detail to understand how to work with pace, not haste, avoiding careless mistakes.
• Strong understanding of operational metrics such as first past yield, efficiency, WIP aging, on-time-delivery, job cost, scrap rate, etc.
• Strong computer skills especially related to navigating ERP systems, job clocking systems, CAD/CAM software, and Microsoft products such Outlooks, Excel, PowerPoint, etc. Previous experience with EPICOR a plus.

Physical Demands:

Legend

N (Not applicable)

Activity is not applicable to this position

O (Occasionally)

Position requires this activity up to 33% of the time (0-2.5 hours/day)

F (Frequently)

Position requires this activity up to 66% of the time (2.5-5.5 hours/day)

C (Constantly)

Position requires this activity more than 66% of the time (5.5+ hours/day)

Lift/Carry 10-30lbs

F

Stand

F

Walk

F

Manually manipulate

F

Squat or kneel

O

Bend

O

Reach above shoulder

O

PIcdef49d468

Removes burrs and sharp edges or excess material from metal components including contouring certain edges and features.

Essential Duties & Responsibilities:

• 
  
• Removes excess metal and surface defects from aerospace hardware or machined surfaces using pneumatic or hand held abrasive wheels or belted grinding equipment.
  
• Uses abrasive belt or wheel according to customer specifications or type of finish specified, product being polished, or amount of metal to be removed, using knowledge of polishing operations and abrasives. Monitors abrasive wheel or belt for wear.
  
• Operates polisher, grinder, or deburring tools and removes metal and surface defects or contours edges of components based on specifications of blue-prints or work instructions.
  
• Inspects work for acceptability of finish. Moves finished components to next work station for further processing.
  
• Performs other work as assigned by the supervisor.
  

• Ability to lift or transfer components or objects of no more than 50 pounds.
• Understand and follow written and oral instructions in English and possess basic mathematical skills.
• Ability to read and interpret blueprints and assist in tooling and process development.
• Considerable ability to use a variety of hand and pneumatic tools.
• Ability to use precision hand held measuring devices, i.e., micrometer, vernier, go/no-go gauges, etc.
• Ability to use fine motor skills to manipulate small tools and perform meticulous work to close tolerances.
• Proficiently interacts with other employees and possess good interpersonal skills.

Education & Experience Required:

• High School diploma or GED
• 5+ years deburring experience or similar work involving fine polishing, grinding or contouring of metal parts in a manufacturing environment, preferably aerospace.

Working Conditions:

Light industrial work setting. Job involves lifting up to 50lbs. in a manufacturing environment that may occasionally require the employee to work in a number of awkward positions.

EOE Statement:

PCX Aerosystems is an equal opportunity employer.

This position is currently accepting applications.

Apply Now

**$2500 SIGN-ON BONUS**

Essential Duties & Responsibilities:

• 
  
• Set-up and operate Horizontal and Vertical CNC Lathes with Fanuc controls according to engineering specifications, instructions, GD&T and operation sheets. Knowledge of manual machines is a plus.
  
• Select appropriate cutting tools, fixtures and tool holders for a given job.
  
• Run similar jobs of short cycle times for extended periods of time where manufacturing processes are stable and do not require frequent change.
  
• Read and interpret engineering instructions, travelers, and blueprints and be familiar with geometric tolerances and principles.
  
• Operate more than one machine at a time, one to two machines depending on the nature of the job and its complexity, occasionally operating more than two machines depending on operator skill and familiarity with a given job.
  
• Must perform routine maintenance on assigned production equipment, i.e., maintain cleanliness of work area and machinery, check machinery fluids and alert maintenance personnel and/or supervisor of malfunctions.
  

Operate lifting and handling equipment such as hand truck, pallet jack, or overhead hoist to maneuver in-process or finished components to desired location.

Required Knowledge, Skills, & Abilities:

• 
  
• Knowledgeable of in-process inspection techniques, standards, and requirements. Able to use and interpret precision measuring devices such as micrometers, verniers, and various hand tools, i.e., gauges to verify the accuracy of dimensional characteristics of components.
  
• Knowledge of metal characteristics in a production setting is desirable.
  
• Knowledge of programming code, canned cycles, threading & boring jaws and makes program edits.
  
• Machinists must have good verbal and written communication skills; good math skills and good interpersonal skills. Must work well with colleagues, supervision and management.
  

Education & Experience Required:

• 
  
• 7 - 10 years Vertical or Horizontal CNC Lathe machining experience in a manufacturing environment, preferably aerospace.
  
• Fully capable of reading, understanding, and following written and oral work instructions in English.
  
• Ability to lift or transfer components or objects of no more than 50 pounds.
  
• HS diploma or GED.
  

This position is currently accepting applications.

Apply Now

Lead complex construction projects from concept to completion, ensuring timelines, budgets, and quality standards are met. Collaborate with cross-functional teams and contractors to drive results and deliver exceptional builds. If you're a proactive leader with a passion for construction excellence, we want to hear from you.

Company Benefits:

• 13 paid holidays
• Vacation and sick pay
• PPE provided along with annual allowance for boots and prescription safety glasses
• Work shirts provided by company
• Annual appreciation package
• Early performance evaluation opportunities
• Competitive benefits (medical/dental/vision)
• 401k + match
• Company paid life insurance and disability
• Employee assistance program
• Career development opportunities

Responsibilities:

• Planning, organizing, directing, controlling, and evaluating construction projects (HVAC/Refrigeration & Mechanical projects) from start to finish according to schedule, specifications, and budget.
• Preparing and submitting construction project budget estimates, critical path schedules, and quality control programs.
• Planning and preparing construction schedules and milestones, and monitoring progress against established schedules.
• Preparing contracts and negotiating revisions, changes, and additions to contractual agreements with architects, consultants, clients, suppliers, and subcontractors.
• Planning, coordinating, and managing effectively all Foremen, material, and equipment to meet the established budget, schedule, and scope of the projects.
• Preparing progress reports and issuing reports to clients as necessary.

Qualifications:

• Must be able to develop and maintain detailed MS Project schedules (startup-task durations, resource allocations, labor costs, etc.).
• Must be able to maintain multiple complex projects in all varying phases of construction at the same time.
• 2-5 years in industrial piping or Ammonia Refrigeration as a Project Manager.
• Successfully completed multiple large-scale industrial Piping and Ammonia Refrigeration projects for reputable contractors.
• Coaching, mentoring, and teaching project teams.
• Advanced financial management and forecasting experience.
• Excellent oral and written communication skills; must be detail-oriented, self-sufficient, and self-motivated.
• Exceptional planning and organizing skills with the ability to manage a number of projects

Company Profile:

CIMCO specializes in the engineering, design, manufacture, installation and service of complex thermal building solutions for industrial, process cooling and recreational refrigeration and mechanical systems. For more than 100 years, CIMCO's leadership and unparalleled research, development and manufacturing programs has put us at the forefront of industry advancements and technological breakthroughs. Our professional engineers, technicians and designers apply innovative state-of-the-art equipment and refrigerants to develop systems that meet even the most complex thermal challenges.

CIMCO is committed to creating an inclusive environment where people from all backgrounds can thrive. Together, we embrace diversity of thought, experience, and perspective, as we combine our unique skills and capabilities to drive successful outcomes for all stakeholders. As an equal opportunity employer, CIMCO provides accessibility accommodations during the recruitment process. Should you require any accommodation, please let us know and we will work with you to meet your needs.