Horst Engineering Manufacturing, CO Jobs in Usa

Kelly® Science & Clinical is seeking a Process Engineering Manager for a direct hire opportunity with one of our clients, a leading small molecule CDMO at their Colorado Springs, CO facility. If you’re passionate about bringing the latest scientific discoveries to life and are ready to take the next step in your career, trust The Experts at Hiring Experts.

Workplace: Onsite in Colorado Springs, CO

Position Title: Process Engineering Manager, Oral Dosage Forms

Position Type: Direct hire

Salary: $125,000-140,000

Are you ready to drive innovation and success in pharmaceutical manufacturing? We are seeking a dynamic Principal Investigator to serve as a technical authority in process development, scale-up, and technology transfer. If you thrive in collaborative, fast-paced environments and are passionate about advancing life-changing therapies, this is your opportunity to make a significant impact.

Responsibilities

Strategic Process Development & Scale-Up

• Spearhead the development and scale-up of robust, scalable manufacturing processes across a wide spectrum of drug products
• Design and lead process characterization and optimization studies, defining critical process parameters and proven acceptable ranges
• Champion Quality by Design (QbD) strategies and advanced statistical methodologies, ensuring seamless progression from laboratory concepts to pilot-scale execution

Technology Transfer Leadership

• Serve as the technical lead for all technology transfer activities, bridging R&D, global manufacturing sites, and client partners
• Develop and implement comprehensive transfer protocols and process equivalence strategies to ensure flawless execution
• Lead high-performing, cross-functional teams through knowledge transfer, process mapping, and documentation best practices

Pilot Plant & cGMP Operations Management

• Oversee cGMP-compliant pilot plant operations, supporting clinical and commercial production, validation, and process improvement
• Drive continuous improvement projects—maximizing efficiency, quality, and yield
• Provide expert troubleshooting and manage deviations, ensuring on-time project delivery

Capital Projects & Facility Optimization

• Lead equipment qualification and validation for cutting-edge process installations
• Direct facility expansion and modification projects to support innovation and new technology implementation
• Optimize facility workflows to enhance operational excellence and scalability

Quality Assurance & Regulatory Compliance

• Ensure strict adherence to cGMP (21 CFR 210/211) and data integrity (21 CFR 11) regulations
• Develop and execute robust process validation strategies in accordance with global regulatory standards
• Lead investigations, implement corrective/preventive actions, and maintain perpetual audit readiness

Project Management & Client Engagement

• Manage multiple, high-profile client technology transfer programs—delivering on time and within budget
• Serve as the primary technical liaison for clients, providing strategic insight and technical guidance
• Develop detailed project plans, risk assessments, and contingency strategies to de-risk tech transfer activities
• Mentor cross-functional teams, fostering a culture of excellence and innovation

Qualifications

Education:

• Bachelor’s degree in Engineering, Pharmaceutical Sciences, or related field; advanced degree (MS/PhD) preferred

Experience:

• 8+ years’ experience (Bachelor’s), 5+ years (MS), or 3+ years (PhD) in pharmaceutical process development, technology transfer, and scale-up within a CDMO or CRO environment
• Demonstrated success managing complex, cross-functional projects in a regulated setting

Technical Mastery

• Deep expertise in pharmaceutical process engineering, manufacturing technologies, process validation, and equipment qualification
• Comprehensive understanding of cGMP, quality systems, and regulatory compliance
• Proven skills in process automation, risk management, and project execution

Leadership & Collaboration

• Recognized leadership in guiding technical teams and cross-functional project groups
• Outstanding client relationship management and communication abilities
• Strategic thinker with a results-driven mentality, adept at navigating complex challenges and inspiring teams

Why Join Us?

• Work alongside industry leaders and innovators
• Participate in high-impact projects accelerating life-saving therapies to market
• Competitive salary, comprehensive benefits, and opportunities for continued professional growth

What happens next:

Once you apply, you’ll proceed to the next steps if your skills and experience look like a good fit. But don’t worry – even if this position doesn’t work out, you’re still in our network. That means our team of expert Science & Clinical recruiters will have access to your profile, making your opportunities limitless.

Sterling Engineering is partnering with a growing manufacturing organization to hire a Manufacturing Engineer (Junior Level) to support manufacturing operations within a highly engineered industrial environment. This role focuses on improving production methods, supporting quality and cost initiatives, and partnering with operations to ensure efficient, repeatable, and scalable manufacturing processes.

Key Responsibilities:

• Evaluate, develop, and improve manufacturing processes to support safety, quality, delivery, and cost objectives
• Analyze production flow, labor requirements, and cycle times to support operational planning and decision-making
• Partner with engineering, operations, and leadership teams to align manufacturing capabilities with production needs
• Support Lean manufacturing initiatives, including process mapping, Gemba activities, and waste reduction efforts
• Lead or support PFMEA and DFMEA activities to identify and mitigate process and design risks
• Develop and maintain manufacturing documentation, including work instructions and process standards
• Support project execution related to equipment, tooling, and process improvements
• Provide hands-on manufacturing support and assist with training technical and non-technical team members
• Monitor quality and process performance, identifying trends and driving corrective actions

Qualifications:

• Bachelor’s degree in Engineering (Manufacturing, Mechanical, Industrial, or related discipline)
• 2-4 years of experience in a manufacturing or industrial engineering environment (or equivalent combination of education and experience)
• Working knowledge of Lean Manufacturing, FMEA / PFMEA, and continuous improvement methodologies
• Experience using CAD tools such as AutoCAD, SolidWorks, or ProE

Company Description

SigmaPro Engineering & Manufacturing, LLC is a precision plastic injection molding company based in Fort Worth, TX, specializing in producing small, intricate plastic parts with exceptional accuracy. With a strong foundation in engineering, manufacturing, and technology, SigmaPro focuses on creating efficient and innovative solutions. Central to the company’s success is a dedication to people, fostering a productive and collaborative environment. By emphasizing the importance of its team members, SigmaPro ensures quality, efficiency, and timely delivery of products to clients.

Role Description

We are seeking a highly motivated Manufacturing Supervisor to join our team. This individual will work directly under the Director of Manufacturing and oversee daily operations on the molding floor. The role requires someone highly structured, organized, detail-oriented, and capable of administrative oversight, in addition to managing employees, schedules, and training programs.

Key Responsibilities

• Supervise and lead a team of molding and quality control technicians.
• Manage employee schedules, workflow, and production priorities.
• Train and mentor new and existing employees on processes, safety, and quality standards.
• Maintain accurate production records and administrative documentation.
• Collaborate with the Director of Manufacturing to optimize operations and maintain production efficiency.
• Monitor production metrics and ensure compliance with quality and safety standards.
• Support continuous improvement initiatives and foster a culture of accountability and teamwork.\

Qualifications

• 3–5 years of experience in injection molding, preferably in a manufacturing environment.
• Previous supervisory experience is strongly preferred.
• Highly structured, organized, and detail-oriented with strong administrative skills.
• Strong leadership, communication, and team management skills.
• Ability to train, motivate, and develop employees.
• Knowledge of quality control practices, safety protocols, and production scheduling.
• Proactive problem-solving skills and the ability to work in a fast-paced environment.

Senior Director, Process Engineering & Contract Manufacturing Scale-Up

Location: Durham, NC (In-Office) 

Reports To: SVP Operations

Applying

To apply directly to this role, please email a non-ChatGPT paragraph explaining why you believe you would be the best fit for this role and attach your resume as a PDF. Applying via email is the only way to be considered.

About Carpe

Carpe is the fastest-growing deodorant brand in the United States. Our team is composed of ~25 incredibly smart people working together in person in downtown Durham, NC. Our office is open, collaborative, and high energy.

We build products that solve real problems for millions of people who struggle with excessive sweating. Our growth over the past several years has been rapid, and we are continuing to expand across retail, ecommerce, and new product categories.

As the company scales, building a strong, reliable, and scalable manufacturing foundation is critical to our long-term success.

The Role

We are seeking a high-ownership process engineering leader with a strong chemical engineering background who thrives in fast-growing environments and enjoys building systems that support scale. This is not a procurement or vendor management role. It is a technical manufacturing role focused on process engineering, scale-up, and improving manufacturing performance.

This role exists to build Carpe’s manufacturing process engineering capability as we expand production across multiple product categories and manufacturing partners. The primary focus is on developing robust, scalable processes that consistently deliver product performance.

This is a hands-on technical role. You will work directly with manufacturing teams to define critical process parameters, troubleshoot production challenges, and improve process reliability as we scale.

You will partner closely with Product Development, Operations, and Quality to translate product innovation into well-defined, scalable manufacturing processes. Success in this role requires the ability to develop long-term process engineering frameworks while also working directly with manufacturing teams to solve technical challenges and improve production performance.

What You’ll Do

Process Engineering & Manufacturing Science

• Build and lead Carpe’s internal manufacturing process engineering capability
• Work directly with contract manufacturing teams to document and refine production processes
• Identify and define critical process parameters that drive product consistency and performance
• Lead process characterization work, including DOE design and execution
• Improve process robustness and repeatability across manufacturing partners
• Troubleshoot complex manufacturing challenges and support manufacturing teams in solving production issues
• Drive continuous improvement initiatives across manufacturing operations

Technology Transfer & Product Scale-Up

• Lead the technical transfer of new products from development into commercial manufacturing
• Work directly with contract manufacturers to scale formulations and processes successfully
• Partner closely with Product Development to translate product specifications into scalable manufacturing processes
• Oversee pilot trials, validation runs, and commercialization readiness for new product launches
• Ensure new products are successfully and reliably launched across manufacturing partners

Manufacturing Performance & Continuous Improvement

• Establish operational metrics and performance tracking across contract manufacturing partners
• Improve manufacturing efficiency, yield, and process reliability
• Lead root cause investigations and corrective actions related to manufacturing issues
• Implement stronger process control and operational discipline across manufacturing partners
• Develop scalable manufacturing frameworks that support continued company growth

Cross-Functional Collaboration

• Partner closely with Product Development to ensure manufacturing processes support product performance requirements
• Collaborate with Quality and Regulatory to ensure manufacturing processes meet compliance and quality standards
• Work with supply chain and planning teams to support production scheduling and inventory needs
• Provide manufacturing insight during product development and innovation planning

Contract Manufacturing Leadership

• Own and manage Carpe’s network of contract manufacturing partners
• Build strong working relationships with technical teams at manufacturing partners
• Improve operational performance across quality, delivery, and cost
• Lead onboarding and qualification of new manufacturing partners as capacity expands
• Ensure manufacturing partners are prepared to support both current production and future growth
• Serve as the primary operational leader responsible for manufacturing performance across the network

Who You Are

• Bachelor’s degree in Chemical Engineering, Manufacturing Engineering, or a related technical discipline
• 10–15+ years of experience in manufacturing, process engineering, or operations leadership within consumer packaged goods, personal care, or related industries
• Experience with emulsions, OTC personal care, or topical formulation manufacturing
• Experience managing contract manufacturing networks and external production partners
• Strong technical background in manufacturing processes and scale-up
• Experience working with highly structured emulsions or shear-sensitive formulations
• Demonstrated ability to build systems, processes, and infrastructure in growing organizations
• Comfortable operating in fast-moving environments where both strategy and hands-on execution are required
• Willing and able to travel a lot (and last minute) 
• Strong engineering instincts and problem-solving ability
• Ability to work directly with manufacturing partners to improve processes and solve technical challenges

Bonus If You Have

• Background in manufacturing engineering or process engineering leadership roles
• Experience scaling products across multiple contract manufacturing sites
• Experience building manufacturing infrastructure in high-growth CPG environments

What You’ll Get

• Direct collaboration with senior leadership as we scale the business
• Opportunity to build and own Carpe’s manufacturing infrastructure during a major growth phase
• Competitive compensation based on experience and level
• Health, vision, and dental coverage
• Flexible PTO
• A front-row seat to the growth of one of the most disruptive brands in body care



Applying

To apply directly to this role, please email a non-ChatGPT paragraph explaining why you believe you would be the best fit for this role and attach your resume as a PDF. Applying via email is the only way to be considered.

The Sr Manufacturing Engineer is responsible for the technical development, oversight and improvement of manufacturing processes within the area of responsibility. This individual will lead process optimization, technical problem-solving, and cross-functional manufacturing initiatives. This role is accountable for achieving senior-level competence Plans and presents engineering program and product design reviews for compliance with engineering principles, company standards, customer contract requirements, and related specifications. Develops and requests design and specification change releases. Assesses and communicates impact of engineering initiatives to functional groups. The ideal candidate demonstrates advanced technical depth, measurable impact on production performance, and the ability to mentor mid-level and entry-level engineers while partnering with cross-functional stakeholders. This role is classified as Exempt for FLSA purposes and reports to the Engineering Manager.

Pay Range: $110,00.00 to $137,000.00 per year. Final compensation will be based on experience and qualifications.

Essential Responsibilities

• 
  
• Develop, release, and maintain detailed technical work instructions for the manufacture and repair of aerospace metallic structures and assemblies, ensuring full compliance with customer(s) engineering definition and regulatory requirements.
  
• Partner with CNC Programming group to develop and implement manufacturing plan for complex metallic machined components/assemblies.
  
• Provide advanced technical support to Quality and Operations teams to achieve site-level Safety, Cost, Quality, and Delivery (SCQD) objectives; act as a primary escalation point for complex manufacturing issues.
  
• Partner with Purchasing and Sales during the quoting process to define manufacturing approach, assess technical risk, establish labor standards, and ensure cost competitiveness.
  
• Establish and validate operational standard hours using time studies and process analysis; drive accuracy in routing and capacity planning assumptions.
  
• Review engineering drawings, specifications, and model-based definitions to ensure manufacturability; translate design requirements into controlled shop-floor documentation.
  
• Train and mentor operators and junior engineers on manufacturing methods, process controls, and quality standards; elevate overall technical capability of the team.
  
• Lead productivity and cost-reduction initiatives through Lean principles, waste elimination, and process optimization; quantify and report measurable performance improvements.
  
• Develop, validate, and industrialize manufacturing processes for new product introduction (NPI), ensuring processes meet defined capability, repeatability, and quality targets prior to production release.
  
• Evaluate nonconforming components and determine repair feasibility; develop and validate repair schemes in coordination with Engineering and Quality functions
  

The individual is required to be a supportive member of Environmental Safety & Health (ESH) and Quality System policies to provide a safe work place and eliminate conditions and behaviors which may cause work related illnesses and/or injuries while delivering quality product and services on time.

Bachelor of Science in Mechanical Engineering, Manufacturing Engineering, Chemical Engineering, Aerospace Engineering or relevant technical discipline, or HS Diploma/GED w/equivalent composite/aerospace manufacturing/repair experience. 5+ years of technical experience with composites and/or aerospace components production or repair.

Desired Characteristics

• Demonstrated experience creating, structuring, and maintaining complex multi-level Bills of Material (BOMs) for aerospace assemblies, ensuring configuration control and production readiness.
• Proven experience in the developing and implementing machining strategies of large-scale metallic aerospace structures, including fixturing for both Milling and Turning.
• Hands-on experience machining large metallic aerospace components, including process planning, tooling strategy, and dimensional validation.
• Strong proficiency in engineering drawing interpretation, including advanced Geometric Dimensioning and Tolerancing (GD&T) application and tolerance analysis.
• Working knowledge of CAD systems such as CATIA, SolidWorks, NX; ability to interrogate models to support manufacturability and tooling design decisions.
• Experience designing and validating manufacturing tooling for, including production fixtures, machining/holding fixtures and assembly aids.
• Demonstrated change management capability, including leading engineering change implementation across cross-functional teams; ability to manage risk, stakeholder alignment, and execution discipline.
• Strategic thinker capable of translating high-level engineering change initiatives into structured, tactical execution plans; analytical, data-driven, and results-oriented.
• Strong background in continuous improvement methodologies including Six Sigma, Lean Manufacturing, and ACE; proven record of measurable operational improvements.
• Excellent written and verbal communication skills with the ability to influence across organizational levels; demonstrated ability to build engagement and sustain a culture of operational excellence
• Strong familiarity with Microsoft Office products (Word, Excel, PowerPoint, etc.) required.

This position is currently accepting applications.

Apply Now

We are seeking a Lead Industrial Engineer to develop and implement efficient production methods and process controls for new and existing assembly operations. In this hands-on role, you will monitor assembly processes, troubleshoot issues, and drive quality improvements. You will serve as a technical expert on various manufacturing projects, introducing new technologies and establishing sustainable processes for long-term production. Your mission will be to ensure profitability, efficiency, adaptability, responsiveness, and high quality across all products and processes through continuous improvement initiatives.

This position is part of the core team launching new manufacturing technologies at our production facility in Florence, KY. It is a fully on-site role, and relocation assistance is available for candidates who live more than 50 miles from the Florence area. The ideal candidate has experience in high-level assembly, testing, and integration of highly complex electronic hardware infrastructure. This is a senior individual contributor position, requiring someone who can collaborate cross-functionally in a fast-paced, high‑constraint environment to deliver data-driven process improvements.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Develop and implement procedures for complex hardware assemblies to validate system integrity and maintain compliance with industry standards and customer quality specifications.

• This role is operationally focused, working closely with leads within Test Engineering and Quality Engineering to drive process test optimization, improvement and execution to plan.

• Improve manufacturability, reduce cycle times, and enhance reliability of complex server rack assemblies.

• Implement and optimize assembly processes to improve efficiency, reliability, safety, and sustainability.

• Identify and resolve bottlenecks or inefficiencies in production and workflows to maximize FPY, throughput, and quality.

• Support Business Development through assessing the needs of potential customers in conjunction with the Engineering Manager and Engineering Leads.

• Design, configure, and monitor process performance during both manufacturing and operational phases, ensuring processes run within specified parameters.

• Develop and maintain detailed process documentation, including work instructions, flow charts, and control plans for all critical processes.

• Implement process improvements to reduce energy consumption, minimize waste, and lower operational costs while maintaining quality standards.

• Monitor key process parameters to ensure compliance with operational thresholds and promptly address deviations.

• Analyze process data to identify trends, predict failures, and support preventive maintenance strategies for equipment and systems.

• Develop and manage a comprehensive maintenance plan for all process-related equipment and assets, ensuring high uptime and reliability.

• Conduct Critical-to-Quality (CTQ) analyses and risk assessments for all process steps to identify potential failure modes and quality improvement opportunities.

• Own the full lifecycle of process equipment, including selection, commissioning, monitoring performance, troubleshooting issues, and coordinating servicing or upgrades as needed.

• Support the commissioning and validation of new server rack systems and upgrades, ensuring they meet design specifications and integrate smoothly into production.

• Work closely with cross-functional teams (manufacturing, design, quality, and maintenance) and utilize data-driven insights to drive continuous process improvements and implement changes that enhance overall production performance.

REQUIRED QUALIFICATIONS

• Education : Bachelor’s Degree in Industrial Engineering, Mechanical Engineering, Industrial Automation, or a related engineering discipline.

• Experience : 8 years of transferrable experience in a process engineering, manufacturing engineering, or industrial engineering capacity within a manufacturing environment (with Bachelor's Degree) OR 6 years of transferrable experience in a process engineering, manufacturing engineering, or industrial engineering (with Master's Degree). Equivalent combinations of education, training, and relevant experience may be considered.

• Proven experience with complex system assembly in a manufacturing setting, ideally involving computer/server hardware or server rack infrastructure.

• Proficiency with process control systems, instrumentation, and various sensor technologies used in monitoring and automation.

• Demonstrated experience with DMAIC methodology, root cause analysis, and other continuous improvement tools/methodologies (Kaizen, 5-Why, FMEA).

• Excellent analytical skills, with strong communication and technical writing abilities for documenting processes and reporting results.

• Ability to influence cross-functional teams and stakeholders using data-driven insights to drive process changes and improvements.

• Proven ability to excel in a highly constrained, fast-paced production environment while managing multiple priorities and meeting deadlines.

• Hands-on mindset and teamwork orientation, with a willingness to be on the factory floor engaging directly with equipment and processes.

PREFERRED QUALIFICATIONS

• Experience with assembly, testing, and integration of highly complex electronic hardware infrastructure.

• Certification in Six Sigma (Green Belt / Black Belt) or formal training in Lean Manufacturing principles.

• Experience with 3D CAD modeling tools (SolidWorks) for designing fixtures, layouts, or process equipment modifications.

• Familiarity with ISO 9001 quality management standards and related regulatory compliance requirements in a manufacturing setting.

• Familiarity with Building Management Systems (BMS) and Manufacturing Execution Systems (MES), especially as they relate to monitoring environmental controls and production processes.

PHYSICAL DEMANDS

The physical demands described here are representative of those required to successfully perform the essential functions of this job. The employee is frequently required to walk and may lift or carry PCs and test equipment weighing up to 50 lbs. Specific vision abilities required include close vision and extended use of computer monitor screens.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those encountered while performing the essential functions of this job. The primary workstation is located on the manufacturing floor, with some time spent in an office setting. The noise level ranges from low to moderate. Required PPE in the manufacturing area includes: composite-toe shoes, hearing protection, protective eyewear, and an ESD vest. The manufacturing floor is modern, climate-controlled, and well-lit.

COMPANY BENEFITS

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options

• 401K match

• Employee Stock Purchase Plan

• Paid Time Off

• Tuition Reimbursement

• Life, AD&D, and Disability Insurance

• Commuter Benefits

• Employee Assistance Program

• Pet Insurance

• Adoption Assistance

• Annual Merit Increases

• Community Volunteer Opportunities

Location: Shelburne, Vermont

Department: Engineering / Operations

Reports To: Engineering Manager/ Operations Leadership

Role Overview

Atlas Gunworks operates in a tight-tolerance, precision manufacturing environment where design intent must translate flawlessly into repeatable production execution.

The Senior Manufacturing Engineer owns the development, validation, and optimization of manufacturing processes across machining, assembly, and finishing operations. This role drives fixture strategy, process capability, documentation rigor, and continuous improvement initiatives that directly impact throughput, cost, and product quality.

This is a hands-on, floor-integrated engineering role requiring deep technical manufacturing experience, not theoretical engineering exposure.

Core Responsibilities

Manufacturing Process Development

• Design, build, and validate end-to-end manufacturing processes

• Establish process routing, sequence optimization, and production flow

• Develop machining and assembly strategies aligned to tight tolerances

• Monitor process stability and implement corrective improvements

Fixture & Workholding Engineering

• Design and implement precision fixtures and workholding solutions

• Improve repeatability, setup reduction, and cycle efficiency

• Collaborate with CNC programmers and machinists on tooling strategies

• Validate fixture performance through production trials

Technical Documentation & Work Instructions

• Create detailed work instructions and visual standard work

• Define tooling, consumables, and machine requirements

• Maintain engineering documentation and revision control

• Support controlled document release and change management processes

CAD, Modeling & Drawing Management

• Develop 3D models for fixtures, tooling, and process aids

• Update engineering drawings and manufacturing prints

• Apply GD&T principles for manufacturability and inspection alignment

• Support tolerance stack-up analysis

Additive & Laser Technology Integration

• Utilize 3D printing for rapid prototyping and fixture development

• Support laser marking / engraving process development

• Identify additive manufacturing applications for efficiency gains

Continuous Improvement & Operational Excellence

• Lead cost, scrap, and cycle-time reduction initiatives

• Drive OPEX and Lean manufacturing projects

• Conduct root cause analysis and implement corrective actions

• Support lights-out machining and automation initiatives

Cross-Functional Execution

• Partner with Design Engineering, Quality, and Production teams

• Support NPI launches and process readiness

• Manage engineering task execution within dynamic production schedules

• Provide technical mentorship to junior engineers and technicians

Required Qualifications

• Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or related field (or equivalent experience)

• 8+ years of manufacturing engineering experience

• Direct experience in tight-tolerance machining environments

• Fixture and workholding design expertise

• Strong GD&T application knowledge

• Experience creating work instructions and process documentation

• Hands-on metals manufacturing experience

Preferred Qualifications

• Firearms, aerospace, or medical device manufacturing exposure

• Additive manufacturing / 3D printing experience

• Laser marking / laser engraving process knowledge

• CAM programming familiarity

• Automation integration exposure

• Lean / Six Sigma certification

Success Profile

The right candidate:

• Understands machining physics, not just engineering theory

• Designs processes that scale, not just function once

• Is equally effective in CAD and on the shop floor

• Identifies waste and eliminates it structurally

• Operates with ownership in high-accountability environments

Manufacturing Engineering Lead

Lead Innovation in Manufacturing Excellence

About CBG Biotech

CBG Biotech is a leading innovator in the design and manufacture of advanced solvent recycling equipment at our Solon, Ohio facility. Founded with a purpose to make the world a cleaner place through sustainable practices, we help laboratories, universities, and industrial organizations reduce their carbon footprint through sustainable resource recovery. Since 1995, we’ve partnered with leading institutions to improve efficiency, minimize waste and advance environmental responsibility. As we expand our product portfolio, we’re looking for passionate professionals to join our growing team and drive innovation forward. Learn more at Summary

We’re seeking a Manufacturing Engineering Lead who thrives in a dynamic environment and wants to make a real impact. This role blends hands-on technical expertise with operational leadership, giving you the opportunity to design and implement improved manufacturing methods, optimize processes and drive efficiency, quality, and safety. You’ll collaborate with cross-functional teams to enhance product design, support new product introductions, troubleshoot technical issues and lead continuous improvement initiatives—all while contributing to long-term operational strategies that align with company goals. Leveraging your proven expertise, this is a chance to become a foundational leader at a fast-growing company with unlimited potential.

Key Responsibilities

• Lead manufacturing engineering activities: process design, optimization, and troubleshooting.
• Develop and implement operational procedures and SOPs for scalability and compliance.
• Manage operations of Production Department ensuring unit builds meet design, quality and delivery requirements.
• Collaborate with cross-functional teams to align design, engineering, manufacturing, quality and supply chain strategies.
• Drive continuous improvement initiatives using Lean/Six Sigma principles.
• Manage implementation of Engineering Change Orders, process documentation, and revisions to ERP system to support CBG’s processes and operations.
• Formulate and execute test strategies/methods for product testing and validation.
• Lead and develop a high-performing production team.
• Support strategic initiatives and advancement of corporate goals.
• Perform other related duties as assigned by the Engineering Manager or Executive Leadership.

Qualifications

• Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering or a related discipline (Master’s degree a plus).
• Minimum 5 years of hands-on experience in manufacturing environments; 8 years preferred.
• Strong problem solving skills and a proactive, results driven mindset.
• Experience with lean manufacturing principles, Six Sigma and continuous improvement methodologies
• Skilled in developing test methods, validation protocols, and performing root cause analysis.
• Proficiency in CAD software and ERP systems.
• Strong communication, organizational and time-management skills
• Proven ability to lead operations and drive results.

CBG Biotech offers competitive salary, Paid Time Off, Life/Medical/Dental/Vision/Disability insurances and 401K match. Flexible work week: 9 hour workday M-Th + 4 hour workday on Friday!

All candidates must pass drug and background screening.

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Millennium Space Systems, a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space.

Our missions have direct impact to global security, like missile warning and Earth observation.

Our team is curious, bold and innovative.

We take risks, innovate and explore new techniques and technologies.

We influence change because we challenge the status quo.

And when we watch our satellites launch, we know each one of us made it happen.

As a Manufacturing Engineer
- Harness, you will be responsible for developing, qualifying, and implementing manufacturing processes and procedures to build and test flight and non-flight cable harness assemblies.

You will be the manufacturing liaison for engineering and be responsible for reviewing harnessing drawings, writing work instructions, supporting production, and working with engineering to optimize manufacturing.

This role requires the ability to work second shift.

This position's internal job code is Manufacturing Engineer.

Our team is currently hiring for levels 3-4.

Position Responsibilities: Act as the connector between the design engineering and manufacturing organizations Identify improvement opportunities and execute initiatives to ensure product quality, reduce lead time, decrease labor hours, maintain safe operations, etc.

Troubleshoot production issues, identify root causes, and drive implementation of corrective actions for non-conformances Create process plans, standard operating procedures, Bill of Materials (BOM), and rework instructions for all manufacturing items within your ownership Conduct reviews of drawings, standards, and other releasable documents Collaborate with design engineers to ensure manufacturability of wire harnesses and provide feedback on design improvements Work within cross-functional teams including quality engineering, manufacturing operations, and supply chain to bring products from new product introduction (NPI) to full-scale production Basic Qualifications (Required Skills/Experience): Bachelor's degree in an engineering discipline 3 years working in a harness/cable assembly environment Familiarity with IPC-WHMA-A-620, NASA-STD-8739.4, and IPC J-STD-001 Technical problem-solving skills, including root cause analysis complete with sound engineering based corrective actions Experience with MES, MRP, and ERP systems Excellent written, verbal communication, and interpersonal skills Preferred Qualifications (Desired Skills/Experience): 5 years of experience in a harness manufacturing and design (electrical & integration) environment Experience in a high-rate manufacturing environment Strong understanding of electrical schematics, wiring diagrams, and harness acceptance testing Writing test scripts, experience with Cirris CH2 and Weetech testers Competency using 3D CAD modeling and PDM software (Solidworks, etc) Exposure to harness design software (Capital, Zuken, etc) Familiarity with lean manufacturing principles and Six Sigma methodologies Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process Drug Free Workplace: Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Total Rewards: At Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

Millennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: Level 3: $96,050
- $141,250 Level 4: $117,300
- $172,500 Millennium is DDTC-registered, ITAR-compliant Company.

This position is located at a facility that requires special access.

Applicants MUST be U.S.

citizens and eligible for a security clearance.

Additionally, applicants must be willing to apply for and maintain a security clearance.

We encourage all interested candidates to apply for any open position for which they feel they are qualified.

Applications for this position will be accepted until May.

31, 2026 Export Control Requirements: This position must meet U.S.

export control compliance requirements.

To meet U.S.

export control compliance requirements, a "U.S.

Person" as defined by 22 C.F.R.

§120.62 is required.

"U.S.

Person" includes U.S.

Citizen, U.S.

National, lawful permanent resident, refugee, or asylee.

Export Control Details: US based job, US Person required Relocation Relocation assistance is not a negotiable benefit for this position.

Security Clearance This position requires the ability to obtain a U.S.

Security Clearance for which the U.S.

Government requires U.S.

Citizenship.

An interim and/or final U.S.

Top Secret Clearance Post-Start is required.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for 2nd shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.aa415a4b-8b21-40fc-a65c-70d2b25ca29a

Additive Manufacturing Lead

Programming and Running Laser Powder Bed Fusion (LPBF) printers a must

Location: Greenville, SC

Industry: Advanced Manufacturing / Aerospace

Job Type: Full-Time | Direct Hire

Pay: Competitive – Based on Experience

NOT REMOTE

MUST BE U.S Citizen

Build the Future of Manufacturing

We are seeking a hands-on Additive Manufacturing Lead to help drive innovation and production in advanced manufacturing. This role is ideal for someone passionate about metal additive manufacturing, process development, and cutting-edge technology.

You will play a key role in supporting Laser Powder Bed Fusion (LPBF) operations, helping produce complex components used in high-performance industries such as aerospace, defense, and advanced engineering.

If you enjoy working with state-of-the-art equipment, solving technical challenges, and being part of the next generation of manufacturing, we want to hear from you.

Key Responsibilities

• Operate and support metal additive manufacturing systems, including LPBF printers (EOS, SLM, or similar)
• Assist with machine setup, build preparation, monitoring, and post-processing operations
• Work closely with engineering teams to optimize builds and improve manufacturing processes
• Review and interpret engineering drawings and technical documentation
• Apply GD&T principles to ensure dimensional accuracy and quality standards
• Maintain accurate process documentation, build reports, and production records
• Assist with troubleshooting machine or build issues
• Support continuous improvement initiatives within the additive manufacturing operation
• Maintain a clean, safe, and organized manufacturing workspace

Qualifications

• Associate’s or Bachelor’s degree in Mechanical Engineering, Manufacturing, Materials Science, or a related technical field OR equivalent hands-on manufacturing experience
• 2–5 years of experience in additive manufacturing
• Hands-on experience with Laser Powder Bed Fusion (LPBF) systems
• (EOS, SLM, or similar systems preferred)
• Proficiency with 3D CAD software such as Siemens NX, SolidWorks, or equivalent
• Ability to read and interpret engineering drawings
• Understanding of GD&T principles
• Strong attention to detail and documentation discipline
• Comfortable working in a hands-on manufacturing environment
• Ability to follow structured processes and quality procedures

Benefits

• 401(k)
• 401(k) Matching
• Health Insurance
• Paid Time Off

Job Opportunity: Manufacturing Engineer with Fameccanica North America in West Chester, OH

Why This Role

If you enjoy taking mechanical concepts from idea to prototype to build‑ready design, this role offers real ownership. As a Manufacturing Engineer at Fameccanica, you will design and develop mechanical components and assemblies for industrial automation machinery—working hands‑on with engineering, manufacturing, and project teams to deliver reliable, high‑quality solutions.

What You’ll Work On

• Design mechanical components and assemblies for assigned machinery
• Take concepts through detailed design, calculations, and validation
• Build working prototypes for testing and customer demonstration
• Create and review CAD drawings, plans, and technical specifications
• Balance performance, safety, cost, and delivery timelines in your designs

What Success Looks Like

• You take ownership of your designs from concept through release
• Your designs are practical, manufacturable, and meet real‑world constraints
• You collaborate easily across engineering, production, and project teams
• You enjoy solving problems and improving designs through iteration

What You Bring

• Bachelor’s degree in Manufacturing Engineering or related field
• Experience designing mechanical components or assemblies
• Proficiency with CAD tools and technical documentation
• Comfort performing engineering calculations and design validation
• A practical, hands‑on engineering mindset

About Fameccanica

Fameccanica North America designs and builds industrial automation solutions that help manufacturers improve production efficiency, quality, and reliability. Based in West Chester, Ohio, the team supports advanced machinery projects for global customers and operates with the backing of a well‑established international organization.

Interested?

If you’re looking for an engineering role where your work moves beyond drawings and into real machines, we’d like to talk. Apply online at or email or email !

A leading aerospace manufacturer in Stuart, FL is hiring a Technical Lead – Manufacturing Engineering (On‑Site).

This role supports complex aircraft engine component production and focuses on process development, manufacturability, quality, and continuous improvement. The ideal candidate brings strong aerospace machining experience, CNC knowledge, and the ability to lead engineering initiatives across a fast‑paced manufacturing environment.

Key Responsibilities:

• Lead process development, tooling strategy, and manufacturability improvements

• Solve complex technical issues and support new product introduction

• Guide and mentor Product & Process Engineers

• Drive Six Sigma, DOE, and continuous improvement projects

• Collaborate with engineering, manufacturing, quality, suppliers, and customers

• Support audits, quality investigations, and process optimization

Required:

• Bachelor’s degree in a technical field or Manufacturing Engineering

• 7+ years in aerospace or manufacturing machining

• Experience with CNC machining and CAD/CAM (Siemens NX preferred)

• U.S. work authorization (ITAR/EAR‑regulated work)

Preferred:

• Leadership experience

• Strong GD&T knowledge

• Lean/Six Sigma experience

• ERP/MRP familiarity

This is an on‑site role in Stuart, FL.

If you’re interested in learning more, feel free to apply through the job posting or reach out for additional details.

NTS is hiring a Manufacturing Manager in Columbus, MS, for a leading aerospace manufacturer. This is a great opportunity for an experienced production leader to take ownership of operations in a high-precision, fast-paced environment.

Job Title: Manufacturing Manager

Location: Columbus, MS

Reports To: Director of Operations

Salary: $85k plus full benefits (4-day work week)

Company Overview:

Join one of the leading aerospace innovators dedicated to excellence in design, manufacturing, and technology. As a multi-million-dollar industry leader, we are committed to pushing the boundaries of aerospace engineering. We are looking for a passionate and driven Manufacturing Manager to be a key player in delivering high-quality solutions in a fast-paced environment.

Position Overview:

We are seeking an enthusiastic and results-driven Manufacturing Manager who is not only a seasoned leader but also a strong advocate for collaboration, communication, and operational excellence. This is an excellent opportunity for an experienced professional to take ownership of a dynamic manufacturing team and drive efficiency, quality, and safety in our production processes. You will work closely with cross-functional teams to ensure smooth and continuous production, while maintaining our commitment to excellence and innovation.

Key Responsibilities:

• Lead and manage a team of manufacturing supervisors and operators, ensuring effective coordination across all production stages.
• Drive continuous improvement initiatives focused on operational efficiency, quality standards, and cost management.
• Develop and implement production schedules, ensuring on-time delivery of high-quality products.
• Foster a collaborative and positive work environment that emphasizes teamwork, open communication, and mutual support.
• Oversee daily manufacturing activities, ensuring compliance with safety regulations and company policies.
• Utilize Lean, Six Sigma, or other operational methodologies to streamline processes and improve productivity.
• Serve as a liaison between production and other departments (engineering, quality control, procurement) to ensure alignment with overall company goals.
• Provide leadership in troubleshooting, problem-solving, and conflict resolution to address production challenges.
• Conduct regular performance reviews, coaching, and training to develop the team and ensure professional growth and retention.
• Maintain a high level of engagement with team members to ensure morale, job satisfaction, and retention.

Qualifications:

• Required: Prior experience in a manufacturing supervisory or managerial role, ideally within the aerospace or similar high-precision industry.
• Proven track record of successfully leading and motivating teams to achieve production targets.
• Strong communication skills with the ability to clearly articulate goals, expectations, and feedback to staff.
• Demonstrated ability to advocate for teamwork and collaboration in achieving operational goals.
• High level of attention to detail and commitment to quality standards.
• Ability to manage multiple priorities and projects in a fast-paced environment.
• Familiarity with Lean Manufacturing, Six Sigma, and other efficiency-driven methodologies.
• A solutions-oriented mindset with a strong sense of ownership and accountability.
• Strong decision-making and problem-solving abilities.
• Preferred: Experience in the aerospace or automotive industries with a focus on high-precision manufacturing.

Education/Experience:

• A bachelor's degree in Engineering, Manufacturing, or a related field (or equivalent practical experience) is preferred.
• 5+ years of supervisory or managerial experience in a manufacturing environment is preferred.
• Demonstrated longevity in previous roles with a commitment to professional growth and organizational success.

Senior Product Manager – Fiber Optic, Broadband Manufacturing

Location: On site in Cleveland, OH

A well-established manufacturer serving the broadband and communications infrastructure sector is seeking a Senior Product Manager to lead strategic growth across a portfolio of fiber optic and broadband connectivity solutions. This is an opportunity to shape the direction of products that support critical network expansion across North America, working at the intersection of engineering innovation, market strategy, and customer engagement.

This role will play a key leadership function in defining product strategy, expanding market presence, and guiding new product initiatives for solutions used by telecommunications providers, utility operators, and broadband infrastructure partners. The ideal candidate combines strong product management expertise with a deep understanding of fiber optic technologies and broadband manufacturing environments.

This Role Offers

• Competitive compensation and comprehensive benefits.
• The opportunity to influence product strategy within a respected manufacturing organization serving the telecommunications and infrastructure markets.
• High visibility with executive leadership and cross functional teams including engineering, sales, and operations.
• A collaborative environment focused on innovation, operational excellence, and long-term market growth.
• Direct involvement in bringing new technologies and solutions to market within the rapidly expanding broadband ecosystem.

Focus

• Develop and execute product and market strategies that drive sustainable revenue growth within the United States broadband and fiber optic infrastructure market.
• Lead strategic planning for a portfolio of products supporting telecommunications and broadband network deployments.
• Guide cross functional teams through the full product lifecycle including development, launch, commercialization, and ongoing market support.
• Collaborate with engineering, manufacturing, and sales teams to align product direction with customer needs and emerging industry trends.
• Identify opportunities to introduce new technologies, expand product offerings, and strengthen competitive positioning.
• Drive new product launch initiatives including market introduction plans, pricing strategy, customer trials, and sales enablement activities.
• Build strong relationships with key customers, channel partners, and industry stakeholders to uncover growth opportunities and market needs.
• Monitor industry developments including technology shifts, regulatory changes, and competitive activity to inform product strategy.
• Develop and track key performance indicators that measure product performance, profitability, and market adoption.
• Participate in industry events, trade organizations, and technical forums to strengthen market presence and thought leadership.
• Support proposal development and participation in customer request processes including RFI and RFP submissions.
• Identify opportunities to improve margins, operational efficiency, and overall product portfolio performance.

Skill Set

• Bachelor’s degree in business, Engineering, or a related technical discipline preferred.
• Seven or more years of experience in product management, market management, or business development within telecommunications infrastructure, broadband technology, or related manufacturing environments.
• Strong understanding of fiber optic products, broadband network components, or telecommunications infrastructure markets.
• Experience guiding products through full lifecycle management including development, commercialization, and ongoing optimization.
• Ability to analyze market data, identify trends, and translate insights into strategic product direction.
• Excellent communication skills with the ability to present complex technical and business concepts to diverse audiences.
• Demonstrated ability to collaborate with engineering, sales, and executive leadership teams.
• Experience managing cross functional initiatives and influencing strategic decision making.
• Self-driven professional with strong analytical thinking, business acumen, and leadership capabilities.
• Experience participating in industry associations or technical groups is a plus.

About Blue Signal:

Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at /46Gs4yS