Vanderweil Engineers Nyc Jobs in Usa

Job Summary: Generally responsible for supervision and technical direction over a team of engineers and designers when functioning as a lead engineer. As lead engineer, responsibilities include total delivery of the civil/structural deliverables and services on time, within performance budget and meeting quality expectations. Duties may include performing advanced engineering work serving as a technical specialist for complex engineering assignments. Work at this level requires extensive progressive experience in civil/structural engineering and involves utilization of project controls for cost, schedule and quality of projects. This work will be performed under minimal supervision.

Primary responsibilities will include but not be limited to:

• Reviewing and approving all civil/structural deliverables.
• Validating professional service and construction estimates at the beginning of a project, and then tracking changes as the project progresses.
• Producing professional service estimates in accordance with the department standards for project deliverables, project studies and estimates, change notices and for the development of new work through proposal efforts.
• Establishing the design criteria, incorporating client requirements, estimate and/or scope basis and design basis meeting applicable state, local and federal standards and codes. Ensuring that any requirements for permitting have been established and communicated to the project team.
• Knowing project scope and deliverables. Initiating timely change notices when deviation is made from project scope, affecting schedule, deliverables or cost of the work.
• Planning and organizing the work of your team. Communicating the plan to your team, the project leadership team and the client.
• Maintaining control of the project by tracking and maintaining discipline performance budget progress, schedule commitments, and quality standards. Understanding and utilizing the project tools that are in place for project control.
• Delegating work to engineers and designers in proportion to their technical skills and experience, then following up for support to ensure efficient progress and quality.
• Consulting with design leaders from other disciplines in proportion to their technical skills and experience, then following up for support to ensure efficient progress and quality.
• Producing estimate level preliminary designs and material take-off suitable for the level of estimate being performed on a project.
• Developing conceptual layouts and cost studies as necessary to determine the simplest, most efficient approach to solving engineering tasks at hand.
• Familiarity with and utilizing department design and drafting standards.
• Producing detail design calculations and sketches for materials of construction associated with the project. Calculations produced will be neatly prepared and organized for efficient checking by others and efficient use by drafters/designers for preparing drawings and as a deliverable when required.
• Producing project designs with efficient use of construction materials with an overall emphasis on ease of construction and completed product meeting the expectations of the client.
• Checking calculations made by other engineers to ensure accuracy, conformance to codes, specifications, design criteria and conformance to good engineering practice.
• Producing construction specifications.
• Monitoring drawings in progress to ensure conformance to design calculations and specifications.
• Assisting the drafting group in resolving routine layout and detailing problems. Ensuring that sufficient sketches and details are provided for completion of engineering drawings.
• Reviewing and checking vendor drawings and other discipline drawings for civil/structural input.
• Producing bid packages enabling civil/structural purchase inquiries to be issued for procurement of materials or subcontract pricing.
• Participating in the planning of training programs, continuous education opportunities and professional development of staff.
• Ability to lead small to large size teams in coordinating civil/structural efforts and keeping the team focused on scope, schedule and budget.
• Ability to identify and develop work sharing packages for interoffice execution support. Provide leadership to ensure communication and execution of work within scope, schedule and budget.

This position offers a highly competitive compensation package, including paid time off, health insurance benefits, and matching retirement contributions.

Ideal Background

Education: Bachelor or Master of Science degree in Civil Engineering from an accredited university is required. Structural coursework is required for structural engineering positions.

Registration: Professional SE registration is highly preferred.

Experience: This position requires 15 or more years of relevant industrial experience in civil/structural engineering

Required Knowledge, Skills, and Abilities

• Familiarity with specifications and installation details of construction bulk materials and equipment.
• Ability to create accurate civil/structural documents from the information found on vendor equipment drawings.
• Ability to develop civil/structural specifications.
• Ability to accurately estimate completion of assigned tasks.
• Ability to develop a construction cost estimate, a detailed engineering schedule and a man-hour budget for a small project or an area for a larger project.
• Ability to determine construction material quantities.
• Develop design criteria and scope of work.
• Experienced in estimating and scheduling professional service hours and assessing the progress and quality of civil/structural work.
• Complete understanding of the skills and experience required to perform engineering and design functions.
• Knowledge and application of company engineering design and CAD drafting standards.
• Working knowledge of CAD software, either AutoCAD, Microstation or both.
• Ability to lead teams to deliver on commitments.
• Ability to deliver convincing presentations of Hargrove Engineers & Constructors services.
• Proficient in the use of Microsoft Word, Excel and Outlook.
• Excellent communication skills, both verbal and written.
• Excellent virtual team skills and cross divisional relationships. Leader and promoter of work sharing through interoffice execution.

Physical Requirements

• Ability to sit, stand, or walk for long periods of time.

Stevens Engineers & Constructors has an excellent opportunity for an experienced and highly motivated Project Engineer/Piping Drafter to join our Cleveland Operations Team. The ideal candidate will have project engineering and drafting experience in heavy industrial markets such as steel, aerospace, or chemical processing disciplines for the purpose of coordinating all technical activities for assigned projects. The Project Engineer/Piping Drafter role blends technical drafting with project coordination to ensure piping systems are accurately designed, fabricated, and installed. While a Piping Drafter focuses on creating technical drawings, a Project Engineer oversees the technical and management aspects of the project, including schedules and client coordination.

The ideal candidate will also have a client-focused approach and will work well independently and as part of the project team.

Stevens offers a competitive salary commensurate with experience, along with an excellent benefit package. This is a perfect career opportunity to join an experienced group of professionals that are committed to providing our customers quality project results.

Essential Duties and Responsibilities

Create detailed 2D piping plans, sections, and isometrics using software like AutoCAD.

Develop and update piping & instrumentation diagrams and line lists.

Build CAD models for equipment and new piping systems based on field measurements.

Prepare, transmit and expedite shop drawings, catalog cuts, samples and other submittals for approval. Maintain logs for all.

Coordinate design activities with the project management team to resolve layout conflicts.

Prepare construction document packages.

Conduct QA/QC reviews of all drawings to ensure technical accuracy and code compliance.

Perform field surveys, including manual dimensions, to gather data on existing site conditions.

Provide technical support to construction personnel and fabricators during installation.

Assist in preparing material takeoffs (MTOs) and bill of material (BOM) estimates for procurement.

Helps track project schedules, budgets, and change orders.

Required Skills

Associates in Drafting, Mechanical Engineering, or a related technical field. With 3–5+ years in piping design or mechanical construction.

Mastery of AutoCAD and 3D modeling software.

Knowledge of SpoolFab Piping Software is a plus.

Proficiency in Microsoft Office (Excel, Word) for reporting and documentation.

Strong understanding of industrial piping codes (e.g., ASME, API) and material specifications.

Familiarity with pipe fitting, joining methods, and fabrication processes.

High attention to detail and precision in drafting.

Strong verbal and written communication for collaborating with clients and site teams.

Ability to work in industrial environments, which may include heights or extreme weather

Equal Opportunity Employer

Stevens Engineers & Constructors, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.

We are proud to be a Drug Free Workplace that places Safety First!

Position Summary:

The Electrical Engineer provides all engineering, technical and administrative support required to take a project from start through completion. This individual will provide AutoCAD/Revit drafting (as required), calculations, system design for various power and low voltage systems, is responsible for client satisfaction, and coordinates manpower assignments and other project related functions as specified by the supervisor. This individual ensures that his or her work is of the highest quality in accordance with company design standards.

Essential Functions

●       Performs electrical engineering by applying the principles of electrical design including but not limited to power, data, fire alarm, security, and site distribution systems and equipment. 

●       Provide direction via sketches and drafting markups for project designers and EITs, including floor plans, details, elevations, ceiling plans, revisions, and other industry standard design drawings/documentation required to accurately depict the electrical design on a project level.

●       Coordinate with architects, engineers, technicians, clients, sub-consultants and others in the design of electrical systems on a project level basis.

●       Leads the creation of project documents. These design documents include design submittals (preliminary, schematic design, design development, construction documents, reports, etc.), plan check and bid documents (including specifications) and other documents required by the plan review process.

●       Provide support of projects in the construction administration phase which may include responses to RFIs, change order requests, product submittal reviews and periodic site visits (punch lists, project sign off).

●       Completes assigned tasks within electrical fees/budget established in project workplan.

●       Participates in continuing education for emerging technology, industry trends, and code compliance.

●       Under supervision, thoroughly conducts preliminary site visits for assessing project scope for the purpose of writing the proposal and coordinating with sub-consultants as needed.

●       Complete other duties as assigned to benefit the organization.

Minimum Job Requirements:

●       Proficiency in reading/interpreting a construction document set.

●       The ability to work well with others (team player) and following instructions.

●       Proficient in office drafting standards (AutoCAD, REVIT, others).

●       Develop drawings from minimal direction by the Industry Lead.

Education:

●       Bachelor of Science Degree in Electrical Engineering. Master’s degree is acceptable but not required.

Experience:

●       0 to 3 years as a Registered Professional Engineer.

Specific Skills:

●       Proficient in Electrical Drafting (AutoCAD). Knowledge of BIM/Revit or other design software is acceptable but not required. Proficient in all levels of construction document development.

●       Registered utility applicant designer is a plus but not required.

Specialized Knowledge, Licenses, etc.:

●       Currently registered as an Electrical Engineer in the State of California.

Supervisory Responsibility, if any:

●       Oversee the direction and quality of work for E.I.T.’s, Designers, Engineering Assistants and other support staff on their respective project team.

Working Conditions

●       Typically work functions will be conducted in an office setting on a Monday through Friday workweek. Site visits required at times and may involve climbing ladders, walking on roofs, and following job site safety policies. Onsite project construction administration participation may be included. Hours is excess of 40 may be necessary at times depending on workload.

Salary Range

●       $85,000 - $105,000

Join Ingenuity Engineers, Inc. as an Electrical Engineer II and become an essential part of our dynamic team! In this role, you'll work side by side with talented Project Engineers and Project Managers to craft, detailed electrical design documents. Your work will play a key role in ensuring that our projects are compliant and ready for permits. If you're passionate about shaping the future of electrical design and want to be a part of a forward-thinking team, we want to hear from you!

Key Responsibilities:

• Understands advanced electrical theory/calculations, electrical system components and devices.
• Interprets codes, standards and design inputs with the ability to apply them within the design.
• Develops calculations, design narratives and work plans to be used as the basis of design of power, lighting and fire alarm plans, single line/riser diagrams, panel and light fixture schedules and project specifications with minimal direction.
• Assumes the role of Engineer of Record for own projects.
• Reviews the work of others and gives specific guidance to the project team to advance the design.
• Provides mentorship to team members with less experience and training.
• Applies advanced engineering principles to solve technical and coordination issues.
• Manages project designs and budgets with limited oversight.
• Attends internal and client coordination meetings, provides direction, make technical decisions and ensure project goals are achieved.
• Performs site visits and investigations with little or no supervision if needed and resolve any challenges encountered.
• Cultivates relationships with clients to foster additional projects.
• Enhances leadership and management abilities.
• Provides cross-disciplinary technical and engineering assistance.
• Contributes to development efforts.
• Refines and develops processes to improve efficiency and quality.
• Takes personal ownership of the work produced.

Required Qualifications:

• Bachelor’s degree with P.E.
• Extensive proven relevant technical and field experience.
• Previous Leadership experience preferred.
• Experience working in a professional A/E office, Consulting Firm, Construction Contractor, or equivalent.
• Proficiency in Revit, AutoCAD, Microsoft Office, Bluebeam and other basic software.
• Strong written, verbal and communication skills with the ability to participate in a collaborative team environment, including coordination with people/teams outside of the company.
• Comprehensive understanding of the components of mechanical, plumbing, and fire protection systems that require power, with the ability to integrate those requirements into the electrical design.
• Ability to sit, stand, walk for extended periods, with occasional bending and the capacity to lift up to 10 lbs. as needed.
• Ability to travel

• Senior Civil Project Engineer (P.E.)
• Location: Richmond, VA (Hybrid Options Available)
• Sector: Land Development & Infrastructure

About the Role

We are looking for a licensed Professional Engineer (P.E.) to lead high-impact site development and infrastructure projects across the Greater Richmond area. You will be the technical heart of our team, driving projects from initial concept through construction while navigating the specific regulatory landscapes of the City of Richmond, Henrico, and Chesterfield.

Key Responsibilities

• Design Leadership: Lead civil design efforts for grading, drainage, utilities, and complex stormwater management systems using AutoCAD Civil 3D.
• Regulatory Navigation: Oversee permitting and compliance with VADEQ and local standards, including Chesapeake Bay Protection Area programs.
• Project Management: Manage project scopes, budgets, and schedules for residential, commercial, and mixed-use developments.
• Mentorship: Provide technical oversight and guidance to junior engineers and designers.

What You Bring

• Licensure: Valid Professional Engineer (P.E.) license in Virginia.
• Experience: 4+ years of civil engineering experience, specifically in land development or municipal infrastructure.
• Technical Mastery: High proficiency in hydrologic/hydraulic analysis and infrastructure design.
• Local Insight: Familiarity with VDOT standards and local Richmond-area permitting processes.

Why Richmond?

Join a firm that values Richmond’s unique blend of historic preservation and modern urban growth. We offer:

• Competitive Compensation: Target salary range of $103,156 – $117,491 (based on experience), with expert-level roles reaching up to $160,000+.
• Comprehensive Benefits: Health, dental, and vision insurance; 401(k) matching; and generous PTO.
• Flexible Work: Modern office space with options for hybrid remote work to support your work-life balance.

WHO WE ARE

Delta Engineers, Architects, & Surveyors (Delta) is a multidisciplinary AEC firm founded in upstate New York in 1976. Along with our corporate headquarters located near the intersection of Interstates 81, 86 and 88, Delta has additional offices across Central New York and Chevy Chase, MD, together with remote team members located across the US. We deliver engineering and architectural design services for multiple market sectors along with providing environmental, survey, landscape architecture, and ecological services to public and private clients located throughout the continental US. Delta team members take advantage of terrific opportunities to advance professionally in a supportive team-oriented culture while enjoying generous compensation and benefits package.

WHO WE NEED

We are seeking a versatile and team-oriented Structural Project Engineer in our Structural Team, ideally located in the Syracuse or Albany, NY area, or at our Endwell, NY office. Candidates located outside the designated office locations may qualify for full remote work, subject to company policy. The ideal candidate should have a Bachelor’s Degree in Civil / Structural Engineering, with a minimum of 6 years of relevant experience. A PE is also required. Experience should include structural analysis, design, and detailing for concrete, steel, and aluminum structures. Experience with cable design is preferred.

The primary duties associated with this position include:

• The candidate should be proficient with the International Building Code (IBC); ASCE-7; ACI 318; ADM-2020; and AISC.
• Performing challenging 3-dimensional structural analyses and designs for a wide variety of clients using various state-of-the-art design software, including RISA 3D, SAP, RAM, and RISA Foundation.
• Responsible for serving as lead project engineer, i.e., taking responsibility for developing design, preparing detailed structural drawings using AutoCAD and REVIT, and specifications. This includes coordinating the work of junior team members and amongst other trades.
• Solving engineering problems using experience, judgment, and education and knowing when to ask for assistance when required.
• Write and review related reports for the services provided.
• Scoping projects and assisting project managers with proposal creation.
• Serving as a Quality Control reviewer for the designs of team members.
• Assisting the Team Leader in initiating, developing, and implementing continuous team improvement initiatives.
• Supporting structural work in our building projects within the Structural Facilities Group as workload warrants.
• Attending client meetings/presentations in the daytime or evenings.
• Communicating with client representatives, contractors, and suppliers.
• Participating in site visits/inspections/documentation during construction.
• Work on a variety of projects including schools, industrial facilities, commercial buildings, and governmental projects.
• This position requires an individual that has strong technical abilities with good organizational and communication skills, and the ability to work in a fast-paced market.

Additional duties will include preparing structural designs; prepare structural design summaries and detailed drawings using AutoCAD and REVIT; consider alternate designs and value engineering; and meeting scheduled project deadlines.

Delta is driven to exceed our clients’ expectations on every project. Accordingly, the successful applicant for this position must be willing to occasionally work adjusted hours/overtime.

WHAT WE OFFER

Hiring Salary Range: $80,000-$110,000 (Salary to be determined by the applicant's education, experience, knowledge, skills, and abilities along with an internal equity and alignment with market area data.)

The following are a few of the benefits that we offer:

• Paid Holidays, Vacation, Sick time
• Health and Dental Insurance
• Optional Vision, LTD and Term Life Insurance
• Enhanced Short Term Disability
• 401K Retirement Plan
• Tuition Assistance Program
• Professional Licensing Reimbursement
• Recruitment Bonus Program

We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Project Manager-Engineer-MEP Firm (3+ years experience):

Profit sharing after 3 years of employment

LL Engineering PC is a MEP firm based in Bayside, NY. We are looking for a full time HVAC, Plumbing, and Fire Protection Engineer to fill a Project Manager position, must have at least 3yrs experience designing HVAC, Plumbing, and Fire Protection for residential and commercial construction projects. Candidate should be knowledgeable in AutoCad. EIT and PE license preferred but not required.

Work will be hybrid where in office work will be on a demand basis. Typically no in office work is required, but can be once a week.

Seeking highly motivated, detail oriented, and hard working individual that is ready take on a managerial role with demonstrated excellent communication skills.

Only local NYC candidates with US Citizenship will be considered

Job Responsibilities:

• Leading projects from initial design phase to final sign off.
• Direct coordination and correspondence with Architects, General Contractors, and others parties involved during the design and construction administration process.
• Conduct field surveys at job sites to take measurements as well as TR inspections. Candidate with car preferred for travel to any of the 5 boroughs. Approximately 20% out of office travel to job site.
• Design work and drafting for Plumbing, HVAC, and Fire Protection as well as supervision and mentorship of entry and junior level engineers.
• Some office Administrative work such as printing and mailing.
• Review submittals, shop drawings, and RFIs during construction phase as well as attending field meetings.
• Coordinate filings with NYC Department of Building as well as other Departments such as FDNY and DEP for filing.
• Strong proficiency in AutoCad.

Please respond if you have the qualifications stated for this position along with a resume. Only local candidates will be considered.

Website: Type: Full-time

Benefits:

• Dental insurance
• Health insurance
• Paid time off
• Retirement plan
• Vision insurance

Systems Engineer – Enterprise IoT & Infrastructure (L2–L3)

NYC, NY (Onsite – physical device handling required)

What are the top 3 skills required for this role?

1. Strong experience with Windows and Linux server engineering

2. Solid networking fundamentals, including Layer 3 concepts (routing, subnets, DNS, DHCP)

3. Hands on experience with IoT devices / hardware configuration and troubleshooting

## Role Overview

• We are seeking an experienced Systems Engineer with strong expertise in enterprise IoT infrastructure, server engineering, and networking to support and implement IoT/OT solutions for a global financial services environment.
• This is not a traditional Windows Administrator or L1 support role. The position requires L2 to early L3 technical depth, combining architectural understanding with hands‑on implementation, troubleshooting, and operational support across devices, networks, servers, SaaS platforms, and security frameworks.
• The role supports enterprise‑grade IoT deployments, including device configuration, patch testing, secure integrations, and rollout activities, while working closely with internal teams, vendors, and stakeholders.

## Key Responsibilities

• Support and implement enterprise IoT/OT device infrastructure, including configuration, maintenance, patching, and troubleshooting
• Translate architectural designs and requirements into operational and technical implementations
• Perform patch testing, deployments, and validation of devices and supporting infrastructure
• Troubleshoot complex issues across device, network, server, and platform layers
• Work with APIs, SaaS platforms, and hybrid cloud environments to enable secure integrations
• Support physical device handling, reformatting, and refurbishment (NYC & London roles) using defined documentation and procedures
• Collaborate with network, security, platform teams, and external vendors to resolve issues and support rollouts
• Create and maintain technical documentation, runbooks, and operational process guides
• Ensure compliance with enterprise security standards, including authentication, authorization, and encryption requirements
• Participate in migration, refurbishment, and new rollout projects for IoT platforms and devices

## Required Technical Skills

• Strong experience with Windows and Linux server engineering
• Solid networking fundamentals, including Layer 3 concepts (routing, subnets, DNS, DHCP)
• Hands‑on experience with IoT devices / hardware configuration and troubleshooting
• Working knowledge of APIs, system integrations, and technical environments
• Experience with SaaS platforms and enterprise authentication protocols (SAML, OIDC)
• Understanding of firewalls, proxy servers, and load balancers in enterprise environments
• Proven experience operating in L2 / early L3 support models
• Knowledge of security fundamentals, including encryption, authentication, and authorization

## Experience & Profile

• 4–8+ years of experience in Systems Engineering, Infrastructure Support, or IoT/OT environments
• Strong analytical and troubleshooting skills across multiple technology layers
• Ability to work independently while collaborating with global teams
• Comfortable supporting production enterprise environments with high security and reliability expectations

## Role Classification

• Level: L2 to early L3
• Focus Area: Enterprise IoT / OT Infrastructure (not end‑user support)
• Work Type: Combination of implementation, advanced support, and operational engineering

Location: New York City (Midtown) - 4 days in-office, Wednesdays WFH Compensation: $200K - $240K Base + Meaningful Equity Backed by: Venture investors behind Square, Instacart, Airtable, and Webflow.

About Us Every B2B buyer wants to hear from a company's current customers before making a decision. As AI makes every market 10x more competitive, a company's ability to unlock the voices of its happy customers is its ultimate moat. We are the AI-native platform making this possible at scale.

We already have Post-Market Fit (PMF) and are partnered with 30+ enterprise customers, including Databricks, Canva, Gong, and Braze. Our founders have a proven track record, having collectively helped build Braze and Datadog (two of NYC's biggest IPOs). Now, we are looking for our first dedicated Frontend Engineer to join our elite 8-person team.

The Opportunity You will be the frontend guru here, setting the standard for how our product is built and how it feels. Reporting directly to our Head of Engineering and working closely with our CEO, you will have outsized ownership across every frontend surface: from our core web app to embeddable components on high-traffic public sites.

What You’ll Do:

• Set the Foundation: Partner with our in-house designer to build out our component library and design systems from scratch.
• Ship Constantly: Go from PRD to production every week. You will design the API, build reusable components, write tests, and monitor user interactions.
• Drive the Roadmap: Near-term projects include a customer analytics dashboard, a chatbot interface, and an overhauled user management experience.
• Own the UI Quality: Establish cross-browser testing frameworks and optimize performance relentlessly. The frontend is where customers feel our quality the most.

Who You Are (The Ideal Profile):

• Experience: 5+ years building customer-facing frontends, with at least 3+ years specifically in high-growth, VC-backed startups/scale-ups (Series B+).
• Tech Stack: You are fluent in TypeScript, React, and GraphQL. You are also highly familiar with Tailwind CSS, Figma, and Storybook.
• Zero-to-One Builder: You have clear signals of outsized ownership (e.g., building a design system from scratch, leading a team, or maintaining an open-source library).
• Design Thinking: You know how to take designer-produced Figma mockups and turn them into pixel-perfect, user-facing features.
• Commitment: You are willing to work hard in person (4 days a week in NYC) and are okay with occasional weekend work (~20% of the time) for on-call duties.

(Bonus points if you have a personal website or non-work-related side projects that showcase your frontend skills!)

Who This is NOT For:

• Professionals with extensive enterprise or Big Tech experience who lack recent, scrappy startup exposure.
• Candidates with a history of job-hopping (multiple stints under 1 year) or repeat contract/freelance work.
• Those with a heavily academic or research-focused mindset. We need rapid, pragmatic shippers.

AI/ML Engineer(Only w2)

Location: NYC, NY (Hybrid: 3 days/week on-site/Only Locals)

Contract Type: Long-term

Interview Mode: In-Person

Minimum 10+ Years of Experience required.

JD:

Developing and deploying ML models using TensorFlow and PyTorch.

Working across the full lifecycle—from data pre-processing with Pandas/NumPy to REST API integration.

Leveraging cloud platforms like AWS Sage Maker or Azure AI to scale solutions.

Tackling complex challenges in NLP and Deep Learning.

Strong proficiency in Python.

A solid grasp of ML algorithms and model deployment.

Experience with cloud AI services and data pre-processing tools.

A collaborative mindset and the ability to work on-site in NYC 3 days a week.

If I missed your call ! Please drop me a mail.

Thank you,

Harish

Talent Acquisition

Astir IT Solutions, Inc - An E-Verified Company

Email:

Direct : 7326946000*788

50 Cragwood Rd. Suite # 219, South Plainfield, NJ 07080