T2 Utility Engineers Jobs in Usa

Job Title: Packaging Engineer

Duration: 12plus months contract

Location: New Albany, OH 43054

Type of Position: Only on W2 basis

Onsite New Albany 100%

Supplier Call notes:

New drug product packaging

Packaging engineers / packaging verification testing

Open to other industries (food/ consumer product/cosmetics/home fragrance)

Multiple shifts might be required (1st, 2nd, 3rd) - Shift work possible, predominately M-F 8am-5pm, must be amenable to different shift when needed.

Job Description

• This position reports into the Packaging Engineering group under Combination Product Operations (CPO) in Client Ohio (AOH). The position will support global supply, new product introductions, partnerships/acquisitions and combination products.

• This position utilizes physics, engineering and chemistry principles coupled with advanced and diverse materials science understanding and principles to assist in the evaluation, design, qualification and implementation of packaging components and the associated systems such as documentation, equipment and processes.

• A knowledge of common materials utilized in pharmaceutical packaging is key to this role. This role will support Client’s manufacturing network by applying broad knowledge of pharmaceutical packaging operations, equipment, devices, and materials to develop the industry’s best combination product assembly and packaging processes.

• Understanding of packaging manufacturing equipment and processes and how materials interact with these is essential to the position.

• The job will require both planning and technical support of complex projects supporting a new site start-up. This role will be responsible for planning and overseeing projects to ensure on-time completion, establish priorities, report project status updates, and manage project dashboards for the Secondary Packaging Engineering team.

This position is responsible and accountable for the following:

• Project Management of entry level engineers and contingent workers

• Evaluation, recommendation and selection of new secondary packaging materials for pharmaceutical products

• Assessing complex problems relating to materials, recommending and implementing solutions

• Write test protocols, perform technical evaluations and submitting technical assessment reports to justify the use of selected materials

• Write Technical Specifications

• Representing Final Product Technologies as required

• Technology transfer from clinical to commercial or from site to site for packaging components and equipment processes

• Establish priorities to ensure all projects are managed within expected due dates

• Lead and present new packaging ideas, concepts and design ideas to the Product Development team

• Ensures cGMP and regulatory compliance are met

• Ensures that change control procedures are followed working with QA and Regulatory to implement changes

• Participants in Pre-Approval Inspections (PAI) and interact with regulatory bodies (e.g., FDA, EMEA, etc.) as needed

• Collaborates with cross-functional teams (i.e. Research, QA/QC, Supply Chain, Maintenance, Manufacturing, Regulatory, etc.) in pre-commercial and commercial activities

Basic Qualifications:

• Doctorate degree in Packaging Engineering, Materials Science, Mechanical Engineering, Chemical Engineering, or related engineering field

OR

• Master’s degree in in Packaging Engineering, Materials Science, Mechanical Engineering, Chemical Engineering, or related engineering field & 5 years of Packaging Engineering experience

OR

• Bachelor’s degree in in Packaging Engineering, Materials Science, Mechanical Engineering, Chemical Engineering, or related engineering field & 8 years of Packaging Engineering experience

Preferred Qualifications:

• Master’s degree in Packaging Engineering, Materials Science, Pharmacology, Mechanical Engineering, Chemical Engineering, or related engineering field

• 7+ years of packaging engineering experience with 4+ years within the Pharma/Bio industry

Regards

Satya S

Sr. Operations Manager

Phone #: 4

Direct Hire Opportunity!

Senior Automation & Controls Engineer - Food & Beverage Qualifications:

• Bachelor Degree in Controls, Electrical, Mechanical or Chemical Engineering or related degree from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam and 7 years electrical engineering experience
• EPC project and Automation 7 Controls experience preferred
• Master Degree in Electrical Engineering and 6 years electrical engineering experience
• EPC project experience preferred
• Expert knowledge in standard engineering techniques and procedures
• Strong knowledge of electrical equipment design ANSI and IEEE Standards. Strong computer skills (e.g. Microsoft Office Suite)
• Excellent written and verbal communication skills
• Experience with leading the discipline design for large projects and delegating work tasks to team members
• Ability to lead execution of work and resolve issues in a team environment
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills
• Ability to perform quality reviews for detailed engineering documents and specifications
• Ability to travel. accredited program
• Must have or be able to obtain a Transportation Worker Identification Card (TWIC)
• Professional Engineer (PE) License Preferred
• This position requires an individual capable of applying intensive and diversified knowledge of principles and practices to broad areas of assignment
• Must be capable of devising new approaches to problems encountered
• Ability to perform quality reviews for detailed engineering documents and specifications
• Knowledge of applicable design standards covering Automation & Controls Design/Engineering such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A
• Experienced with variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS)
• Experience in Rockwell and Siemens PLC platform. Experience in GE, Modicon, Opto22, Mitsubishi, and Triconex PLC platforms a plus
• SCADA experience with Factory Talk and Wonderware local and distributed systems, Ignition Software is a plus
• MES Design and Implementation Experience a Plus, PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS
• Machine safety risk assessment and required PL design compliance to ISO13849 is a plus
• Process safety SIF/SIS design compliance to ISA/IEC 61511 is a plus
• Experience with PlantPAX and PackML is preferred
• Familiarity with tools like SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired

Senior Automation & Controls Engineer - Food & Beverage Description:

• Responsible for compliance with company and project site safety policies
• Design responsibility for all Automation and Controls scope on the project
• Leads a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design
• Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines
• Responsible for leading and developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization
• Responsible for commissioning and startup of those design deliverables
• Lead and prepare controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details
• Lead the specification, design, and procurement activities for control panel and equipment vendors, manage vendor progression, and lead the Factory Acceptance Tests (FATs)
• Lead and prepare electrical design deliverables including 480VAC and below equipment and motor power design, installation plan drawings, and conductor schedules
• Determine process instrument measurements protocols, such as temperature, pressure, flow, level, analyzers, and control valves. Utilize knowledge of various technologies for selecting the appropriate controls application
• Experienced in reviewing P&IDs and working with process engineers to define and show proper controls scope of the project
• Develop and manage verification of design, calculations, project studies and report preparation
• Interfaces directly with offsite design office and coordinates and tracks execution of controls deliverables to that office
• Responsible for leading and performing quality reviews of project design submittals and coordinating those reviews within the department
• Responsible for applying knowledge of commonly used automation and controls engineering/design concepts, principles, practices, codes, and procedures within the engineering services industry
• Interfaces directly with construction personnel in development of contracts and execution of work
• Develops project estimates at each project phase through various software such as Proposal works, Integrated Architecture Builder (IAB), SIL Solver, Bluebeam, Excel, and Visio
• Supports project manager in the development and tracking of automation and controls project budgets and expected progress
• Works with clients and vendors directly in developing design
• Builds effective relationships with existing clients, customers and contractors and develop new business opportunities
• Responsible for ensuring customer satisfaction goals and expectations are met
• Has a list of clients that frequently request them for projects or assistance
• Provides leadership, technical direction and development to Automation and Controls team members
• Assists in the day-to-day allocation of resources to their projects
• Coordinate with field personnel to resolve design related installation issues, calculations, field inspections and testing of controls systems
• Responsible for leading the technical execution and team during onsite start-up and commissioning activities
• Responsible for developing and submitting discipline change notices as needed to the project management team
• Fully understands and can execute the EPC project approach
• This position will require making trips to job sites to survey, support installations, and lead startups (travel about 30%)
• Work with our business development team to identify and develop key project and customer pursuits
• Frequently attends and hosts client events
• Develops business strategies for future projects
• Understands business needs and profitability factors
• Reviews and develops engineering hour estimates and proposals for all phases of the project
• Supports interviewing and hiring process for new team members
• Coordinates workload with Automation and Controls Department Manager
• Complies with all company policies and standards
• All other duties as assigned

Title: Sr. Mechanical Design Engineer, Exteriors

Location: Fremont, CA

What to Expect

As a Mechanical Design Engineer of the Exterior Engineering Team, you will be responsible to design, prototype, validate, release, and launch components for current and future vehicle programs.

Exteriors covers a diverse family of components including Front & Rear Fascia Assemblies, Underbody, Underhood and other trim components.

You will be part of the team working on complex exterior vehicle systems in terms of styling, function, and quality. You will utilize your expertise in one or more of these commodities and develop as a vehicle engineer, designing and delivering components and exterior systems.

You will collaborate and work cross functionally with many other Vehicle Engineering teams to develop parts and assemblies from the concept phase to launching.

You will be part of Tesla’s Vehicle Engineering organization reporting to the Manager of Exterior Engineering Team.

What You’ll Do:

• Concept engineering and feasibility
• Packaging and layout within vehicle architecture
• Design to deliver customer-driven exterior system targets for craftsmanship, function, cost, and weight
• Participate in the iterative process with the Tesla design/styling studio to deliver the optimal balance of form vs. function vs. cost
• Detail design including surface development, structures, datum strategy, attachments, GD&T
• Utilize DFSS methodologies as appropriate during the design, validation and launch of the program
• Interpret CAE simulation results and integrate recommendations into product design
• Collaborate with key suppliers for DFM, MoldFlow and tooling design approvals supporting injection trials for part appearance and functional validation
• Work with plastics engineering to improve designs for optimum layout of plastic assembling and paint lines
• Collaborate with cross-functional teams within the Tesla Vehicle Engineering, Manufacturing Engineering and Procurement groups to ensure system manufacturing, assembly feasibility and serviceability

What You’ll Bring:

• Bachelor's Degree in Mechanical Engineering or equivalent experience
• Catia V5/V6 experience is preferred. Experience and proven expertise using other CAD software are acceptable
• Strong understanding of mechanical engineering fundamentals
• Basic knowledge of large plastic part design, plastic painting, injection molding and processing
• Evidence of following the design process from initial concept stages through tooling release and production launch
• Experience managing suppliers for product development
• Exposure to a mix of design challenges for variety of materials and processes such as stamping, injection molding, casting, composites
• Understanding the fundamental differences in design and engineering between low and high-volume production, as well as entry and premium vehicle requirements
• Experience with DFSS methodologies during the design, validation and launch of automotive programs
• Familiarity with the development of specifications, DFMEAs, DVP&R’s and other technical documents

Nidec Mobility America Corporation(NMOA) seeks an energetic and focused Customer Quality Engineer (automotive electronics) within our St. Charles, IL operations.

As a world leader in sensing and control technology, we control the most discrete functions within an automobile – from seat switches, power window switches, and instrument panel controls, towards complex user interfaces. NMOA is directly involved with automotive OEM’s and holds a leadership position within Nidec for product development with global vehicle makers.

Objective

Works with interdepartmental Engineers / technical colleagues in a team environment to

manage the New Product Launches of key customer accounts for Quality, leading / solving product problems.

The Customer Quality Engineer (NPL) manages strategic customers’ accounts with direct customer issues with effective communication and provides superior problem solving / critical thinking skills. The Engineer interacts with others globally while traveling occasionally to customer and other Nidec locations.

Essential Responsibilities

• Develop strategy to manage specific customer accounts
• Lead customer quality issue resolution
• Interact with customer to satisfy their requirements
• Understand customer specific requirements
• Maintain daily quality (PPM / other KPI targets) and cost (internal / external costs) data for all requirements.
• Actively engage site production team to drive manufacturing improvements
• Support new business opportunities and new product development programs
• Gather warranty data, generate warranty charts, analyze trends and prepare warranty report for each assigned OEM to reduce warranty cost
• Support change management programs customers, and at plant level.
• Fulfill / Submit all new parts submission (PPAP) requirements
• Interact closely with cross functional Team to perform Advanced Product Quality
• Planning (APQP) for new product launches and Advanced Quality Planning (AQP) for product and/or process changes.
• Key member of FMEA Development serving as key member liaison between
• Manufacturing Engineering and Design Engineering.
• Set quality goals and improvement plans
• Document and utilize lessons learned
• Review / Improve Control plans
• Lead / Direct customer issues to closure by gathering appropriate teams and leading problem solving using tools, including: 8D, 5P, 5 Whys, Fault Tree Analysis and other documents, per customer.
• Additional responsibility may entail New Product Launch activity which would require FMEA Moderator training.

Experience: 2+ years’ experience automotive manufacturing

Education: Bachelor's Degree

Knowledge/Skills/Abilities:

• Strong Detail / Accuracy in technical details and business writing / communication
• Analytical thinking and working knowledge of problem-solving techniques (i.e. paretos,
• cause and effect, fish bone diagrams, and 5Why analysis).
• Technical thinking and core tool knowledge as well as knowledge of plating, plastic
• molding, metal stamping and/or welding is a plus.
• Written and verbal communication with customers (internal & external)
• Quality engineering / Manufacturing engineering experience in automated high volume
• production environment within automotive industry.
• Able to implement / use of various charts, corrective action programs, simple DOE and other SPC Tools.
• Limited knowledge of soldering, electronic components and PCB assembly is a plus.
• Knowledge of ISO 14001 / IATF 16949, VDA Standards, and IPC-A-610D
• Strong skills/expertise with Microsoft Office, Word, Excel, Access and Minitab.
• Experience with European Automotive OEMs (BMW, VW, Audit, Mercedes, etc.) is a plus.

Travel Required: up to 10%

Keywords: Automotive, APQP, Electronics, Stamping, Customer Quality Engineer, customer

specific, PPM, KPI, Advanced Quality Planning, FMEA, 8D, 5P, 5 Whys, Fault Tree Analysis, 6-

panel, ERP, QAD, Warranty

No Soliciting

This position is not open to recruiting agencies.

Immediate Opening for a Senior Manufacturing Engineer (Norristown, PA)

SNAPSHOT!

Are you the type of individual that is motivated by the challenge of a dynamic, complex, yet rewarding career? Can you execute and drive manufacturing improvement in high mix low volume environment? READ ON!!!! Looking for a Senior Manufacturing Engineer who is passionate about leadership, processes, and systems!

Key Responsibilities Include:

• Assists Manager in the planning and establishing of manufacturing engineering schedules and following up performance against estimates.
• Create assembly process planning, provide support to production activities and coordinate implementation of product changes, improvement projects and preventive / corrective actions.
• Design and develop manufacturing processes for enhancements, product changes and related fixtures and tooling that are consistent with zero defect level and low product cost.
• Provides engineering support for troubleshooting and resolving technical problems in production line coordinating the necessary actions with relevant areas.
• Analyzes manufacturing process flows continually for the enhancements of quality, cost reduction, and throughput.
• Oversees and approves the creation and implementation procedures required to assemble and test products.
• Ensures processes and procedures are in compliance with company systems and regulatory requirements.
• Provides guidance to production team and quality regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
• Develops and implement technical training for the Manufacturing Engineers and Production Planners.
• Contacts with vendors in determining product specifications and arranging equipment, parts, or material purchase, and evaluating products according to quality standards and specifications.
• Oversee the successful implementation of major projects and programs for the corporation and organization from a manufacturing engineering perspective.
• Must be proficient with MES, MS Office, and other computer software tools for developing reports and supervising the department.
• Ensure that health and safety guidelines are followed.
• Manage the tooling and tools assigned to production.

Experience & Qualifications:

• Bachelors of Science Engineering degree
• Minimum 5 years of related experience working in Manufacturing Engineering in environment of Aerospace and Defense or Contract Manufacturing.
• Demonstrated experience in a team leader or supervisory role.
• Must possess a complete technical understanding and application knowledge of aircraft manufacturing, assembly, tooling and tools.
• Aircraft and product configuration management.
• Supervisory Experience
• Customer service skills
• Experience in Aircraft assembly process
• Experience in utilization of Lean Concepts.
• Proficiency on use of MES, CATIA, SAP and Primavera Scheduling systems
• Strong written and verbal communication
• Work in a safe professional manner adhering to Company Standards and all regulatory requirements including, OSHA, EPA, State and Federal regulations

KEY BENEFITS INCLUDE:

• 401k
• Paid vacation + sick time + paid holidays
• Friendly, employee-centric company culture
• Amazing health benefits (medical, dental, vision, etc)
• Client is offering a base of $80-95K

For immediate consideration, please send your resume to !

** Please note that this is an on-site position without remote capability. This position requires travel between multiple sites. **

About IT at Cambridge Health Alliance (CHA)

The Information Technology Department at Cambridge Health Alliance empowers high-quality, equitable, and patient-centered care through innovative and secure health IT solutions. Grounded in CHA’s mission and strategic plan, IT supports clinical, operational, and academic excellence by providing reliable infrastructure, safeguarding health information, and enabling data-driven decision-making. With a future-focused approach, the team works to enhance access, advance health equity, and drive innovation across the system.

Position Overview

Reporting to the Director, Network & Telecommunications, the Senior Network Engineer serves as the principal technical authority for the Cambridge Health Alliance enterprise voice and data network. This role entails the coordination of all network implementations, modifications, and maintenance, ensuring stringent alignment with the overall enterprise design. The incumbent will function as a senior engineer to LAN, WAN, and Cableplant engineers and technicians, thereby fostering high-quality, patient-centered care through the deployment of secure and innovative health IT solutions.

Key Responsibilities

• Conduct research and furnish recommendations for strategically appropriate support tools and systems, including network management platforms, traffic analysis solutions, and retrospective/prospective projection modeling.
• Lead the configuration, installation, implementation, and advanced troubleshooting of micro-segmentation, routers, switches, wireless controllers and infrastructure, and other critical communication devices.
• Systematically monitor response times, bandwidth utilization, and resource availability to propose and implement performance enhancements. Utilize specialized surveying tools to optimize coverage and capacity within high-density environments.
• Design and administer the IP address scheme and associated IP address assignment mechanisms.
• Design, deploy, and maintain robust enterprise wireless networks, including the execution of site surveys and comprehensive RF planning.
• Configure and troubleshoot wireless access points (APs) and wireless LAN controllers (WLCs).
• Ensure the integrity and security of the wireless network through the implementation of WPA2/3 protocols, and RADIUS integration. Proven hands-on experience implementing Network Access Control (NAC) solutions.
• Resolve complex and atypical network problems, employing advanced packet capture and protocol analysis tools such as Wireshark.
• Monitor and coordinate the maintenance of network hardware and software to ensure maximum operational efficiency and uptime.
• Maintain up-to-date, meticulously detailed network topological diagrams and documentation for the entire CHA network and all business partner connections.

Technical Requirements & Qualifications

Education, and Experience

• Bachelor’s Degree in Computer Science, Engineering, or a closely related field is required; equivalent significant professional experience (e.g., a minimum of 6 years total experience) may be substituted.
• A minimum of 7-10 years of progressive experience in network engineering within an enterprise environment is mandatory, with at least 5 years served in a Senior Network Engineering role.
• Experience within a large, distributed, and complex healthcare organization is highly desirable.

Technical Knowledge

• Demonstrated hands-on experience with Juniper, Aruba.
• Advanced and comprehensive knowledge of OSPF, EIGRP, BGP, RIP, RIPv2, TCP/IP, UDP, ICMP, EVPN-VXLAN and 802.1x standards.
• Deep understanding and practical application of VLANs, data/voice trunking, Spanning Tree Protocol (STP), Link Aggregation Group (LAG), and layer 2/3 fault tolerance design.
• Proficiency in the configuration and management of Access Control Lists (ACLs), Firewalls, Virtual Private Networks (VPNs), and Network Access Control (NAC) solutions and wireless security.

Certifications (Desired)

• Juniper Networks Certified Professional - Service Provider (JNCIP-SP) or Juniper Networks Certified Professional - Enterprise (JNCIP-ENT)
• Aruba Certified Mobility Professional (ACMP)
• CompTIA Network+ or Security+
• Certified Wireless Network Professional (CWNP) certifications (CWNA, CWAP, CWDP)

Working Conditions and Physical Demands

• Mandatory rotating 24/7 on-call support is required, necessitating a 30-minute remote response time or a 1-hour on-site response time.
• Must possess reliable personal transportation to facilitate travel between multiple sites.

Please note that the final offer may vary within the listed Pay Range, based on a candidate's experience, skills, qualifications, and internal equity considerations.

Location: CHA Somerville Campus

Work Days: Monday - Friday, 8:30am - 5:00pm, On-call Rotation

Department: IT CHA Network

Job Type: Full time

Work Shift: Day

Hours/Week: 40

Union Name: Non-Union

Henkels & McCoy, Inc. (H&M) is a leading utility construction firm providing critical infrastructure for the power, oil & gas pipeline, telecommunications, and gas distribution markets throughout North America. Founded in 1923, the firm adapts a century of experience to the dynamic infrastructure needs of today. H&M leverages the collective strength of its diverse disciplines to create seamless integrations between projects, clients, team members, and communities. The company has been recognized with an E. I. DuPont Safety Excellence Award.

H&M is a purpose-driven company. Our core values guide our strategy, performance, and culture. We believe in maintaining an environment where team members can make an impact, grow, and thrive. A place where they find meaning and purpose in doing the important work of ensuring communities have the vital energy, light, and communications to prosper. Our culture is inclusive and welcoming. Our teams are empowered with abundant training, tools, and opportunities to follow their curiosity and ambitions. Everyone has an equal chance to advance. Everyone is supported, respected, and challenged to be their best. We’re always looking for talented and dedicated people to join us and love where they work.

Henkels & McCoy is a proud subsidiary of MasTec (NYSE: MTZ), a Fortune 500 Company ranked by Engineering News-Record as one of the leading contractors in the country. H&M is part of the MasTec Power Delivery segment. We are certified as a minority-controlled company by the National Minority Suppliers Development Council (NMSDC). Our rich diversity of people and ideas makes us a stronger, more innovative organization.

The Field Engineer I assists in ensuring construction project activities comply with company and contract requirements and supports the overall project schedule by providing technical support for construction, including participation in planning, execution, quality control, and completion of the work.

This role also assists in ensuring compliance with the Henkels & McCoy established Project Management Methodology and upholds H&M safety and quality management protocols.

The Field Engineer I will contribute to the management of overall project performance and assist in identifying potential stakeholder conflicts. They are responsible for communicating project risks to the PM as they arise and assisting in the development of appropriate risk mitigation steps. This role contributes to the management of overall project performance.

Additionally, the Field Engineer I aids in ensuring that team goals, roles, protocols, and business relationships are consistent with high-performance requirements and congruent with the company's strategy. The ideal candidate will lead by example in an environment that fosters trust and candor, will maintain personal accountability, and will communicate assertively and constructively.

• Exposure to construction or utility industry
• Experienced in MS Office Suite (Word, Excel, PowerPoint)
• Varied to Broad problem-solving skills

Minimum Educational Background:

BS degree in Project Management, Construction Management, Engineering, Business and/or equivalent years of experience

Minimum Years of Relevant Experience:

0-2

Henkels & McCoy, Inc. is an Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individual with Disabilities.

Required Skills & Experience

• Professional Engineer (PE) license (North Carolina preferred)

• Extensive experience with OpenRoads Designer (ORD) in a SME or ORD Modeling experience

• 10+ years of roadway design experience (7+ years considered for strong candidates)

• Demonstrated experience delivering complex roadway projects with limited technical direction

• Strong communication skills and ability to work effectively with clients and multidisciplinary teams Ability to design a project from 25% to final signed and sealed

• Exposure to drainage, structures, or traffic control design

• Prior experience supporting project management tasks or client relationships Bachelor’s degree in Civil Engineering

Nice to Have Skills & Experience

• Drainage, Structures or Traffic Control experience

• V8I experience

• Experience working with NCDOT and North Carolina municipalities

• PM Experience (Ability to track schedule and budget for discipline)

• Client Relationships or book of business

Job Description

Position Overview We are seeking a Senior Roadway Engineer to join a growing Transportation team in North Carolina. This role is ideal for a highly experienced roadway design professional who thrives in a hands‑on technical leadership position, enjoys mentoring junior staff, and can independently deliver complex roadway projects from early design through final signed and sealed plans. The Senior Roadway Engineer will serve as a technical lead and OpenRoads Designer (ORD) subject matter expert, supporting active and upcoming transportation projects for NCDOT and local municipalities while collaborating closely with project managers, clients, and multidisciplinary teams. Key Responsibilities Technical Leadership & Design • Lead roadway design for transportation improvement projects, including intersections, roundabouts, interchanges, widenings, and bike/ped facilities • Perform and oversee senior‑level roadway geometry, drainage, pavement markings, signing, and work zone traffic control design • Independently advance projects from approximately 25% design through final plans, including signed and sealed deliverables • Provide quality control (QC) reviews and ensure adherence to project scope, standards, and client requirements Software & Technical Expertise • Serve as a subject matter expert in OpenRoads Designer (ORD), including modeling and production workflows • Utilize MicroStation and related roadway design tools; V8i experience is a plus • Support the development of specifications, cost estimates, and technical reports as needed Project & Team Collaboration • Coordinate with project managers, engineers from other disciplines, and design staff to deliver quality projects on schedule and within budget • Create, maintaining and monitoring scopes, fees, schedules, staffing projections, risk registers, QC documentation, and deliverable submittals • Participate in internal and external project meetings, providing technical insight and roadway leadership Mentorship & Professional Development • Train and mentor junior and mid‑level roadway engineers, particularly in ORD and complex roadway design • Provide technical direction with minimal oversight and promote best practices across the roadway team • Collaborate with practice and office leadership to support continued growth in North Carolina

Do you enjoy being part of a team and take pride in your continuous development of transformational leadership skills? Are you looking for an opportunity to further build your technical knowledge through interactive training and development programs?

As a Lead Plumbing Engineer, you will have the opportunity to leverage your design expertise to drive successful execution of commercial plumbing and process piping projects. The Lead Plumbing Engineering will play a crucial role in mentoring fellow engineers, spearheading coordination efforts, and ensuring the seamless execution of design tasks across our projects.

What you will do

• Perform detailed calculations related to plumbing systems, including waste/water/vent, pipe sizing, water heater/boiler sizing, pump sizing, friction loss, etc.
• Utilize engineering principles to ensure the construction of efficient and effective plumbing designs.
• Collaborate with internal and external teams to lead design coordination efforts.
• Develop and review equipment schedules and submittals.
• Perform drafting in CAD and Revit software’s to implement design standards for plumbing and process piping projects.
• Prepare Title 24 Acceptance documents and Cal-Green documentation.
• Ensure adherence to plumbing codes and regulations.
• Assist with LEED certifications and related documentation.
• Generate plumbing system layouts and engineering designs for prospective projects and secured jobs.
• Produce deliverables such as drawings and specifications related to plumbing and process piping systems.
• Collaborate with detailers to ensure consistency and constructable of Revit models and shop drawings.
• Provide guidance and mentorship to junior or entry level engineers, offering technical expertise and serving as a resource throughout various stages of design projects.
• Participate in ongoing training and development to enhance skills as a design professional and remain updated on current plumbing system, technology, and current drafting / modeling best practices.
• Participate in the preparation of all project closeout as-built drawings.
• Assists in the annual review process for Plumbing Engineers, providing valuable feedback to leadership for future goal setting and development.
• Represent the company as a design professional during project team design meetings.
• Maintain a commitment to excellence and always act in the best interest of Silicon Valley Mechanical.
• Support the Plumbing department with other tasks and projects as business requires.

Education, Skills & Experience

• Bachelor’s degree in mechanical engineering or similar field preferred.
• 6+ years of experience in commercial plumbing design, piping design or similar field required.
• Proven experience with plumbing process piping design preferred.
• Ability to evaluate, provide diagnosis and necessary solutions on existing systems preferred.
• Demonstrates proficiency in atypical systems in the plumbing industry preferred.
• Demonstrated experience interpreting CA plumbing, mechanical, fire, and building codes required.
• Possesses an EIT certification a plus.
• Proficient in MS Office (Word, Excel, and Outlook), AutoCAD, Revit, and Bluebeam highly preferred.

Compensation & Company Benefits Include

This is a full-time exempt salaried position. The compensation for this role is $120,000 - $180,000 annually and is based on experience and skillset.

Health: Medical / Dental / Vision / Life & Disability Insurance / FSA

Well-Being: Robust Maternity & Paternity Leave / EAP / Paid Holidays / PTO / Interactive Breakroom

Financial Wellness: 401k w/ Employer Contribution / Employee Referral Bonus / “Positive Pulse”

Community Investment: Volunteer Opportunities / Team Building Activities / Employee Activities

Physical Requirements

As a Lead Plumbing Engineer in the Mechanical Contracting Industry, there are certain physical requirements you should be aware of. These requirements ensure that you are capable of performing the necessary tasks safely and effectively. Reasonable accommodations may be provided to qualified applicants who may not be able to fulfil certain aspects of the role. The key physical requirements for this role are outlined below:

• This role may involve physical activity including walking, standing, and driving while moving around the office and visiting construction sites to assess plumbing systems.
• This role may require reviewing and interpreting architectural drawings, schematics, and other technical documents related to plumbing system design.
• This role may require the use of computer design software and other tools to create accurate and detailed plumbing system designs.
• This role may involve working at a desk, computer, or standing for prolonged periods of time.
• This role may require clear verbal and written communication skills to effectively collaborate with team members, clients, and contractors.
• This role may require the use of personal protective equipment (PPE) during job walks and site visits.

Who We Are:

At SVM, we are more than just a leading mechanical contractor specializing in design-build commercial HVAC, plumbing, piping, service/maintenance, and 24-hour emergency services. We’re a team dedicated to supporting the Bay Area, Sacramento, and Nevada regions with trusted expertise and an unwavering commitment to delivering exceptional experiences at every level.

Our success is built on a collaborative culture that values teamwork, innovation, and doing the right thing. We take pride in fostering an inclusive and welcoming environment where every team member feels supported, valued, and empowered to grow. At SVM, we believe our people are our greatest asset, and we prioritize their development, well-being, and success.

Our state-of-the-art fabrication facility reflects our dedication to quality and efficiency. By leveraging cutting-edge 3D design and manufacturing technology, we detail and fabricate ductwork, piping, and pre-skidded equipment to execute projects with precision and excellence.

At SVM, we don’t just focus on work—we focus on balance. We encourage a life-work approach that allows our team to thrive both personally and professionally. We are committed to helping our team members grow, stay curious, and work collaboratively to tackle any challenge. With the support of peers, managers, and executive leadership, our team is equipped to succeed and build meaningful careers.

The statements above reflect the general nature and level of work expected for this role. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required. The company reserves the right to modify, add, or remove responsibilities as needed to meet business and organizational needs. Please sign below in acknowledgment and receipt of this document.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title:  Lead, Mechanical Engineering - Thermal Analyst

Job Code: 33517

Job Location:  Wilmington, MA

Job Schedule: 9/80 (Every other Friday off!)

Relocation: Relocation assistance is available to qualified applicants

Job Description: 

L3Harris has an opportunity for a highly skilled Thermal Analyst to join our talented engineering organization. The Thermal Analyst will be a technical leader across multidisciplinary teams of engineers to create the best overall system design including thermal design, analysis, and test of optical systems operating in harsh space and ground environments. The candidate will possess in-depth understanding of aerospace thermal engineering technology and payload architectures for spacecraft sub-systems and instruments. These talents are used to direct and oversee teams who specialize in conductive, convective, and radiative analyses, understanding of heat pipes, radiative heat transfer, and thermal control hardware design (thermal blankets, surface treatments, heater tapes, thermistors) and the interaction with optical structures in order to minimize optical errors, and achieve operational temperatures. The role requires utilizing state of the art custom software in conjunction with Thermal Desktop and Finite Element Analysis (FEA) packages and often mentor other Thermal Analysts in the use of such tools.

Essential Functions: 

• System level thermal design & development, payload level integration and test, and risk mitigation for space-based environments
• Perform thermal design and analysis tasks on complex mechanical hardware including precision mechanisms, electro-mechanical devices, aerospace mechanism design, complex electronics packaging, supporting space-based deployable mechanisms, avionics, innovative thermal and ground based systems
• Create and analyze design concepts using thermal analysis software & FEA
• Defines and establishes the technical approach to meet assigned objective
• Directs, coordinates and provides assistance to engineering team in order to meet assigned objectives
• Program support also includes requirements derivation and verification, system architecture development, loads derivation, trade studies, design sensitivity/optimization studies, preliminary and final design analysis, generation of analysis documentation (including presentation materials, and deliverable data packages), and leading system test activities
• Organization of thermal design and analysis as an IPT lead; frequently interfacing directly with customer technical leads and management.
• Prepares reports, formal documentation and presentation materials summarizing analysis results and present results to both external and internal groups, including leadership and customers
• Participates in and present information for Preliminary Design reviews (PDR), Critical Design Reviews (CDR) and Technical Interchange Meetings (TIM)
• Interfaces with outside suppliers/customers and other engineering disciplines to drive designs to closure (Structural, Systems Engineering, Electrical, Manufacturing, Performance, Quality, Configuration Management)
• Presents design details at program reviews to customers and independent reviewers
• Development of thermal test plans to manufacture and test payload sensor systems
• Support new business opportunities
• Mentor junior level engineers

Qualifications: 

• Bachelor’s Degree in Mechanical Engineering or other related engineering or science degree and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience
• 7+ years of professional experience using thermal analysis tools such as Thermal Desktop (preferred), Sinda, Flotherm, Icepak, etc.
• 4+ years of providing technical leadership to a multi-disciplinary mechanical engineering team through system requirements, design, analysis, test, hardware build, delivery and launch
• Professional experience with thermal analysis of mechanical and electronic systems, in space, air or ground environments
• Professional experience with thermal vacuum testing
• Ability to obtain and maintain a U.S. TS/SCI Security Clearance

Preferred Additional Skills:

• Experience with finite element analysis software
• Able to support design decisions with well documented engineering analyses and calculations
• Able to analyze problems and to focus and drive down to the root cause of problems quickly
• Experience in leading engineering teams from conceptual through detailed design phases
• Experience as a lead engineer, project engineer, or IPT lead is a plus.
• Experience with Microsoft office tools (Word, Excel, PowerPoint, etc.)
• Active TS/SCI clearance

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $122,000.00 - $227,000.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.