Sinus Pressure Jobs in Usa
2,891 positions found — Page 6
OBJECTIVE:
The Wash Bay Employee is responsible for cleaning, detailing, and preparing construction rental equipment for customer use. This role ensures that all equipment is returned to presentable condition, maintained to company standards, and ready for the next rental. The Wash Bay Employee also assists with basic inspections, organization of equipment, and maintaining a clean and safe work environment.
RESPONSIBILITIES:
* Wash, clean, and detail construction rental equipment (e.g., excavators, skid steers, lifts, loaders, and small tools) upon return.
* Remove dirt, debris, grease, and other residues using pressure washers, cleaning solutions, and hand tools.
* Inspect equipment for visible damage, missing parts, or maintenance concerns and report findings to the service department.
* Assist with fueling and staging equipment for upcoming rentals.
* Maintain cleanliness and organization of the wash bay area, including cleaning supplies and tools.
* Follow all safety guidelines and use proper protective equipment while operating pressure washers and cleaning chemicals.
* Perform other duties as assigned to support the service and rental team.
QUALIFICATIONS:
* High school diploma or equivalent preferred.
* Previous experience in equipment washing, detailing, or related work is a plus, but not required, training will be provided.
* Ability to operate pressure washers, hoses, and basic hand tools.
* Strong attention to detail and ability to follow instructions.
* Reliable, hardworking, and able to work independently or as part of a team.
* Must be able to lift up to 50 lbs and work in outdoor conditions (heat, cold, dirt, dust, noise).
WORK ENVIRONMENT:
* Primarily outdoors in the wash bay and yard.
* Exposure to water, cleaning chemicals, noise, and heavy equipment.
* Requires wearing appropriate PPE (gloves, safety glasses, hearing protection, etc.)
EQUAL OPPORTUNITY EMPLOYER MINORITIES / WOMEN / VETERANS / DISABLED
Location: Main Hospital Bldg - 6th Floor
PRIMARY PURPOSE
A Registered Nurse (RN) with > 2 years of experience. The RN is a licensed professional who uses the Parkland nursing professional practice model to coordinate patient care delivery, that focuses on a particular patient population(s)/specific health conditions, by the health care team. Using the nursing process, the RN assesses the patient, identifies nursing diagnoses based on responses to health problems, develops and implements an individualized plan of care, and evaluates the patient's response. The RN utilizes knowledge of patient needs and the healthcare environment to assist patients to transition through the healthcare encounter without any preventable complications or delays. The RN delegates interventions to health care personnel based on the Texas Nursing Practice Act, each patient's condition and the competencies of the employee.
MINIMUM SPECIFICATIONS
Education
- Must be a graduate from an accredited school of nursing.
- BSN, preferred
- Prefer graduates of a Wound, Ostomy and Continence Nursing Education Program (WOCNEP) accredited by the Wound, Ostomy and Continence Nurses Society (WOCN).
Experience
- Must have two years of nursing experience.
- Prefer experience in an acute care setting.
Equivalent Education and/or Experience
- N/A
Certification/Registration/Licensure
- Must have current, valid RN license or temporary RN license from the Texas Board of Nursing; or valid Compact RN license.
- Must have current healthcare provider CPR course completion card from one of the following:
- American Heart Association
- American Red Cross
- Military Training Network
- Must obtain Wound Care Ostomy and Continence Certification (WOC) within 18 months of hire.
Skills or Special Abilities
- Provides care for assigned patient population in accordance with the current State of Texas Nurse Practice Act, established protocols, multi-disciplinary plan of care, and clinical area specific standards. Provides continuous assessment, consults with other team members as required and provides nursing care which demonstrates patient centered/patient valued care. Exercises independent judgment in providing nursing care and takes initiative in recommending changes to care plan.
- Must be able to demonstrate effective communication skills to facilitate a multidisciplinary care approach involving the patient, family, interdisciplinary team members to include peers and community health care.
- Must demonstrate advanced analytical ability to prioritize, assess, evaluate, and recognize variances in the patient or family that may require adjustments in the plan of care to promote optimal outcomes.
- Must demonstrate skills of self-direction, time management, flexibility and adaptability with patient care.
- Must initiate changes in patient care utilizing independent judgment with minimum supervision.
- Must possess leadership abilities.
- Must demonstrate knowledge of and comfort with application, management and guidelines of negative pressure wound therapies.
- Must demonstrate and maintain basic knowledge of operating room techniques for negative pressure therapy application.
Responsibilities
- Provides complex clinical specialty care to patients with wounds and ostomies to include performing and documenting a focused assessment related to the specialty patients needs.
- Collaborates with the health care team to implement a plan of care and maintains verbal or written communication with the patients team. Communicates the plan of care to the patient, family and primary nursing team.
- Provides staged teaching plans for patients and families with complex learning needs by providing verbal coaching, return demonstration and written material at correct educational level and in native language where possible. Designs teaching plan to be reinforced by the primary nurse whenever possible.
- Works with case management and primary team to promote discharge planning with appropriate specialty supplies and home care when appropriate.
- Serves as the resident expert regarding the specialty supply formularies for wound, ostomy and continence supplies and function as a clinical expert in the management of patients on pressure reducing specialty beds and mattresses.
- Serves as a clinical resource to health care providers regarding wound, ostomy and continence issues with patients to include providing educational lectures as needed for new nursing and medical residents. Serves as a preceptor and mentor to students at all levels and across multiple disciplines.
- Identifies areas of education needs among peers and other health care providers and develops educational programs to address these needs. Prepares and conducts an in-service educational program for the assigned department, at least once per year.
- Participates in the development of hospital policy and practices related to wound ostomy continence specialty area. Develops and revise policies and practices related to the Wound Care Service role.
- Attends multidisciplinary rounds and interdisciplinary committees as assigned
- Collaborates with other clinical department to improve the patient experience.
- Maintains and implements knowledge of applicable rules, regulations, policies, laws, and guidelines that impact or govern nursing practice, and ensures the hospital and Parkland are in compliance. Develops effective internal controls that promote adherence to applicable state/federal laws and the program requirements of accreditation agencies and federal, state, and private health plans. Seeks advice and guidance as necessary to ensure proper understanding. Maintains and updates knowledge of sanitation, infection control, safety, supplies, equipment, and appropriate utilization of supplies and materials.
- Identifies ways to improve work process and improve patient and customer satisfaction. Makes recommendations to supervisor and implements and monitors results as appropriate in support of the overall goals and mission of the assigned area and Parkland.
- Stays abreast of the latest developments, advancements and trends in nursing practice by attending seminars/workshops, reading professional journals and actively participating in professional organizations. Maintains State of Texas Licensure as a Registered Nurse, plus any additional required licensures/certifications. Attends one national or regional wound care conference annually and shares information learned to peers for integration into daily practice.
Requisition ID: 995372
The Opportunity
Do you want to be a part of one of America’s first beach brands? Founded in 1961 by female founder Carrie Birdwell Mann, Birdwell Beach Britches maintains its rich tradition of handmade, exceptionally crafted, and highly functional apparel. Our signature board shorts, made of nearly indestructible SurfNyl™, provide an unprecedented level of comfort and durability.
By bringing high-quality, functional products to the market, we empower consumers to buy better and reduce waste, improving our environmental footprint. Birdwell is committed to sustainability, innovative sourcing, and maximizing the use of materials throughout the product lifecycle.
Your Role: Product Developer
As Product Developer, you will play a critical role in translating design vision into premium, production-ready garments. You’ll work cross-functionally with Design, Production, and Sourcing, managing the development process from concept through final sample. This role demands exceptional efficiency, the ability to thrive under pressure, and a strong problem-solving mindset. You’ll ensure cost control and uncompromising quality while navigating challenges with resilience and creativity.
Attention to fit, trim, fabric, and finishing is essential, as is maintaining clear communication with suppliers and vendors. You’ll own calendar tracking, sample management, and cost negotiations—bringing a disciplined, efficient, and solutions-oriented approach to each product cycle.
Key Responsibilities
Product Development Process
- Manage all aspects of development from initial handoff through final SMS and pre-production approvals, ensuring timelines are met even in high-pressure situations.
- Ensure all styles meet Birdwell’s premium standards for fit, fabric, trim, and construction, balancing speed and quality.
- Maintain product integrity while solving for cost, feasibility, and production efficiency—proactively identifying and resolving obstacles.
- Collaborate with Design to interpret seasonal concepts into tech-ready garments, adapting quickly to shifting priorities and challenges.
- Ensure all products meet regulatory & brand compliance requirements.
Technical & Quality Oversight
- Own tech pack accuracy, spec creation, and fit comments; coordinate and attend fittings with a focus on rapid, effective problem resolution.
- Manage sample tracking, review proto/SMS/TOP samples, and provide feedback on fit, quality, and make, demonstrating resilience and adaptability.
- Ensure quality standards are clearly communicated to suppliers and reinforced through development, even under tight deadlines.
Vendor Communication & Sourcing Support
- Act as daily point of contact for development vendors and raw material suppliers, maintaining composure and clarity under stress.
- Track fabric and trim sourcing; request submits and approvals based on calendar deadlines, prioritizing efficiency and accuracy.
- Negotiate pricing and minimums with vendors to balance margin and quality expectations, using creative problem-solving to achieve optimal outcomes.
- Build strong relationships with domestic manufacturing partners to support brand standards and resolve issues swiftly.
Calendar & Budget Management
- Own and maintain the development calendar; ensure timely approvals and handoffs to Production, even when facing competing demands.
- Partner with the VP of Operations on margin planning, target pricing, and vendor capacity, using data-driven problem-solving to optimize results.
- Maintain organized records of development status, sample flow, and cost changes for maximum efficiency.
Qualifications
- 5+ years of product development experience in premium men’s apparel, with a focus on woven shorts, woven pants, woven tops, sweaters, knits, and UV shirts.
- Proven expertise in developing high-quality, heritage men’s apparel.
- Experience with domestic apparel development, including sourcing and production with U.S.-based vendors and factories required. Experience working in the greater-Los Angeles area strongly preferred.
- Strong technical knowledge of garment construction, fit, and grading for the above categories.
- Familiarity with trims, finishing techniques, and materials used in high-quality, long-lasting men’s apparel.
- Proficient in Adobe Illustrator, Excel, and PLM systems (or highly organized in manual tracking if no PLM is used).
- Excellent supplier communication and negotiation skills, with a proven ability to resolve issues under pressure.
- Strong sense of urgency, accountability, and time management, with demonstrated stress resistance.
- Passion for product excellence, heritage craftsmanship, and creative problem-solving.
- Must be available to travel to factories and vendors, both domestic and global. Must also be available to work on-site in San Clemente, CA. The day-to-day needs of the business will dictate the work location.
Why Birdwell
At Birdwell, quality isn’t a tagline—it’s our tradition. As Product Developer, you’ll help turn vision into reality, ensuring that every stitch, seam, and silhouette lives up to our promise of performance and longevity. Join us in creating products that are truly built for life, where your efficiency, resilience, and problem-solving skills will make a lasting impact.
Our client is seeking an experienced Hydraulic Pipe Fitter with strong tube bending and hydraulic system assembly skills. This position supports machine tool builders, OEMs, and plant maintenance customers by fabricating and installing high-pressure hydraulic tubing systems to precise specifications.
We are looking for someone hands-on, detail-oriented, and capable of working independently in a fast-paced industrial environment.
Key Responsibilities
• Measure, cut, bend, and fabricate hydraulic tubing (steel & stainless) • Operate manual and hydraulic tube bending equipment • Interpret hydraulic schematics and mechanical drawings • Install and route high-pressure hydraulic lines on industrial machinery • Perform tube flaring, deburring, and fitting installation (JIC, ORFS, NPT, metric) • Pressure test completed systems for leaks and integrity • Work alongside hydraulic technicians during system startup and troubleshooting • Maintain clean and safe work area • Follow OSHA and shop safety standards
Required Qualifications
• 3+ years experience in hydraulic tube bending and pipe fitting • Strong understanding of hydraulic systems and components • Ability to read and interpret blueprints and hydraulic schematics • Experience with Swagelok, Parker, or similar tube fitting systems preferred • Ability to work independently with minimal supervision • Valid driver’s license and reliable transportation
Preferred Experience
• Machine tool industry experience
- • Field installation experience at customer facilities • Experience working with 3,000–5,000 PSI hydraulic systems • Welding or tack welding experience (a plus)
Primary responsibilities include planning and executing events, with an emphasis on contributing to the overall creative, technical and logistical elements that help an event succeed (event design, build strategies, audiovisual production, networking, logistics, partner sourcing, partner management, asset management, budgeting, negotiation, and client service). The Event Manager will spend the majority of their time managing all aspects of the event production process, working as part of the team from event concept, to implementation, live show, to load out. The Event Manager should work effectively with both client and internal teams to flawlessly deliver event programs that drive client results against established strategic objectives, timelines and financial goals. The Event Manager should thrive under pressure, enjoy travel, and have a passion for event production and logistics.
Responsibilities Include:
• Contribute resources to proactively ensure high quality service delivery while striving for continuous improvement.
• Responsible for following department protocols for event planning
• Follow project plan for each portion of implementation and holding external partners accountable
• Work with the Raiola internal team and external vendors in ensuring that all logistical needs for the event are understood and met.
• Identify necessary vendor / partner support, and then source and manage accordingly
• Liaise with audio-visual partners with sourcing all needs and ensuring that they are appropriately incorporated into the overall event
• Assist with payments and processing
• Onsite point of contact for all aspects of production
• Utilize strong internal partnership skills while working cross-functionally with the team in order to ensure that the project is implemented with internal stakeholders as required, and that client vision and satisfaction is met
• Exhibit exceptional written and verbal communication skills with superb attention to detail
• Oversee the project budget, keeping track of expenses and updating the team on costs so that they can be communicated to the client as needed
• Ongoing reconciliation of all project expenses, including ensuring vendor invoices are accurate and paid, and client invoices reflect all approved event expenses
• Provide solutions for visual and spoken client presentation needs occasionally under high-pressure circumstances.
• Provide immediate response to requests for assistance on events in progress.
• All other duties as assigned.
Skills + Personal Qualities:
● Great communication skills, written and verbal
● Team player
● Sense of humor
● Enjoys life and sees the beauty in helping others
● Must be comfortable in a small office, open plan setting
● Experience managing and directing corporate special events
● Working with budgets with multiple levels
● Demonstrate a high level of knowledge in large-scale corporate special events and productions
● Educated on the latest event technologies, with the ability to weave these in to event experience seamlessly
● Experience in managing labor crews
● Strong production competencies
● Well-developed project management skills
● Eye for detail and maniacal attention to delivering high quality, error-free deliverables
● Anticipates project needs and proactively delivers
● Builds solid and reciprocal relationships with designated client contacts and vendors
● Fosters trust and open/honest communication with the internal team and partners
● Gathers and analyzes program data to identify opportunities and make recommendations on strategy
● Knowledge of Microsoft Office products including Outlook, Microsoft Office and Keynote
● Ability to meet tight deadlines and work well under pressure.
● Strong organizational skills, time management skills and attention to detail required.
● Strong verbal and written communication skills.
● Ability to prioritize and manage multiple tasks/projects.
● Ability to work independently without supervision, be self-directed and demonstrate initiative.
● Ability to take direction without follow up.
● Ability to work collaboratively with others for whom you have no direct supervisory authority.
● Strong teamwork and team synergy skills required.
● Exhibit good judgment and decision-making skills.
● Availability and willingness to work extended hours, including nights, weekends, holidays and be on-call as necessary.
PHYSICAL REQUIREMENTS
• Capability to stand, kneel and/or crouch for long periods of time
• Capability to work in hot humid environments
• Capability to work in cold environments
• Capability to lift & move excess of 60lbs as is necessary in the normal flow of the day to day work load unassisted and lift and move 100lbs with assistance.
• Assist in the loading of various vehicles with equipment.
Please submit a cover letter, portfolio, and resume to Cover letter should include a few sentences about a life experience that demonstrates your ability to manage your time while helping others simultaneously. Salary range $68,000- $75,000 per year plus benefits.
The entry level Bench/Hydro role is responsible for removing irregularities, surplus metal-ragged edges, burrs, etc., from parts.
Principal Activities
- Prepare for and test subject parts to varying pressures
- Remove burrs, fins, core wire, sand, and irregularities from unmachined surfaces of various parts by filing, grinding
- Clean/wash parts
- Use hand and power grinders, scrapers, files, buffing equipment, vibratory tumbling machine, and media
- High pressure washer, holding, and clamping devices, wrenches, pressure gages, water, air, sealing solutions, hoist-operated cranes, and other lifting equipment
- Utilize multi-function electric or air-crane (where available) to lift, move, load, and unload parts to perform work center functions
- Properly fill out all paperwork and keep good housekeeping
CANDIDATE REQUIREMENTS
Knowledge Skills & Abilities
- Required to follow written and verbal instructions
- Self-driven and able to self-manage
- Must be able to lift up to 25 lbs unassisted
- Lift, pull, push. Continuously, walk/move from one machine to as many as three
- Physically, load and unload parts
Education & Experience
- 1 - 3 years of manufacturing and/or machining experience preferred
- High school diploma or equivalent required
CIRCOR is an EEO Employer of Females/Minorities/Veterans/Individuals with Disabilities
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
2026-03-04
Country:
United States of America
Location:
US-CT-WINDSOR LOCKS-B1A 1 Hamilton Rd BLDG 1A
Position Role Type:
Onsite
U.S. Citizen, U.S. Person, or Immigration Status Requirements:
U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Security Clearance Type:
None/Not Required
Security Clearance Status:
Not Required
Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology.
Plan, set-up, and perform a variety of processes to maintain the flow of work to manufacture heat exchangers, water separators and other environmental control system components while practicing and complying with environmental health and safety directions and procedures.
What You Will Do:
- Plan, set-up, prepare and perform fabrication, assembly, test and associated precision fabrication processes.
- Plan, set-up and operate a variety of tools and equipment such as power presses, band saws, belt sanders, expanders, and power shears to cut, form, trim, fit, roll, bend, drill and saw material to fabricate detail parts following established methods and procedures.
- Plan, set-up, and perform resistance spot welding and salt braze processes.
- Operate a variety of conventional and CNC/NC equipment to perform milling, drilling and turning operations to established methods and procedures.
- Plan, set-up, edit programs, and operate various presses and lasers to cut and form details.
- Plan, set-up, and perform pressure, leakage and functional tests.
- Plan, set-up and operate furnaces for processes such as drying, annealing, aging and curing product.
- Receive, unload, check, record, prepare, inventory, store, disburse, and deliver a variety of materials, products and equipment.
- Maintain rough stores, cribs, gage cabinets, and point of use storage areas. Order, organize, and store such items as supplies, materials, chemicals and tools.
- Safety wire, prepare product, make and apply nameplates and package for shipment.
- Fabricate and repair containers.
- Participate in review, analysis and ordering of purchased parts and materials to ensure appropriate inventory levels. Communicate with suppliers on delivery and quality concerns.
- Review open purchasing and shop part requirements. Review regularly with internal suppliers and purchasing. Coordinate and expedite deliveries as required.
- Perform visual, dimensional and functional inspection using variable measuring instruments such as micrometers, verniers and checking fixtures.
- Mix and apply bonding agents, coatings and chemicals.
- Check calibration of gages, instruments and equipment in accordance with established procedures. Record and document as required.
- Prepare test pieces and micros using equipment such as grinders, cutters, sanders, polishers and mounting presses.
- Sharpen or modify tools, make up simple forming dies, tooling and templates.
- Perform periodic maintenance such as cleaning and lubricating fixtures and equipment, adding fluids, charging filters and tightening hardware.
- Participate in audits of processes, procedure and work areas.
- Use computers and office equipment to record and process transactions.
- Utilize and maintain all necessary documentation such as logs, reports, charts, sampling plans, statistical process control records and nonconformance documents.
- Instruct one or two fellow employees in proper performance of duties.
- Utilize statistical methods to monitor process control and capability. Use data to investigate areas for potential process improvement.
- Improve processes and solve problems in cooperation with fellow employees and technical support.
- Move parts and materials to designated locations in accordance with material flow procedures, and initiate follow-up lists.
- Keep equipment and surroundings neat, clean and organized.
- Perform related duties as required within the scope of this job function.
- 3rd Shift: 12am to 7am, Monday to Friday.
- Training may take place on 1st, 2nd Shift, or 3rd Shift for up to 3 months.
Qualifications You Must Have:
- Must have a high school diploma or GED.
- 1-2 years of experience in quality control and inspection processes.
- Prior use of air tools and fixtures to set-up parts for welding and understanding of location gages such vernier calipers and depth micrometers.
Qualifications We Prefer:
- Sheet metal working skills such as grinding, bending, cut-off tools, polishing, deburring.
- Experience completing pressure test, assembly of Heli coils, riveting, and spot welding.
- 5-7 years of relevant experience in quality control and inspection processes.
- Familiarity with statistical process control (SPC) and other quality assurance methodologies.
- Experience with the use of precision measuring instruments and inspection equipment.
What We Offer:
Some of our competitive benefits package includes:
- Medical, dental, and vision insurance
- Generous 401(k) plan that includes employer matching funds
- Collins provides eligible employees with paid time off
- Tuition reimbursement program
- Student Loan Repayment Program
- Life insurance and disability coverage
- Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection
- Birth, adoption, parental leave benefits
- Ovia Health, fertility, and family planning
- Adoption Assistance
- Autism Benefit
- Employee Assistance Plan, including up to 10 free counseling sessions
- Healthy You Incentives, wellness rewards program
- Doctor on Demand, virtual doctor visits
- Bright Horizons, child and elder care services
- Teladoc Medical Experts, second opinion program
- And more!
Learn More & Apply Now!
We make modern flight possible for millions of travelers and our military every second. Our major product lines are on-board virtually every aircraft flying. Be it keeping passengers safe with our emergency power generation systems or creating a positive in-flight experience through reliable cabin pressure controls and quieter engines, Power & Controls focuses on delivering a best-in-class experience to our customers. We hire the top people in the industry. Their ideas drive our performance, and their integrity keeps our customers happy. Join us as we take flight!
*Please ensure the role type (defined below) is appropriate for your needs before applying to this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
The salary range for this role $35.40 - $44.47 per hour; however, Raytheon Technologies considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills.
At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again.
Apply now and be part of the team that's redefining aerospace, every day.
#TopOpps
#P&CPM
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
RESPONSIBILITIES:
Read and interpret blueprints or welding process specification.
Operate manual or semi-automatic welding equipment to fuse metal segments using processes such as gas metal arc (GMAW), flux-cored arc (FCAW), shielded metal arc (SMAW), oxy-acetylene (OAW).
Operate manual or semi-automatic flame cutting equipment.
Operate metal shaping machines such as brakes, shears and other metal straightening and bending machines.
May cut metal plates or structural shapes. May be designated according to type of equipment used as Welder, Welder, Flux-Cored Arc (welding); Welder, Gas-Metal Arc (welding); Welder, Gas-Tungsten Arc (welding); Welder, Hand, Submerged Arc (welding); Welder, Plasma Arc (welding); Welder, Shielded-Metal Arc (welding).
Observes tests on welded surfaces, such as hydrostatic, x-ray, and dimension tolerance to evaluate weld quality and conformance to specifications.
Inspects grooves, angles, or gap allowances, using micrometer, caliper, and precision measuring instruments.
Removes rough spots from work piece, using portable grinder, hand file, or scraper.
Welds components in flat, vertical, or overhead positions.
Determines required equipment and welding method, applying knowledge of metallurgy, geometry, and welding techniques.
Notifies supervisor of any quality or safety issues.
Maintains effective interpersonal working relationships and functions as a team member.
Ensures proper care in the use and maintenance of equipment and supplies; promotes continuous improvement of workplace safety and environmental practices.
Performs miscellaneous job-related duties as assigned.
Works in other departments on an as-needed basis.
Follow and comply with all safety and work rules and regulations. Maintain departmental housekeeping standards.
Assist in training new employees in the safe and most efficient use of fabricating and welding methods.
EQUIPMENT KNOWLEDGE:
Must have a basic understanding of computers.
Must have reading, writing and simple math skills.
Must be able to read blueprints.
ROLE REQUIREMENTS:
High school diploma or GED with one year of trades training and at least one year of related experience; or a combination of education and experience.
Ability to read and interpret documents such as bills of material, blueprints, safety rules, operating and maintenance instructions and procedure manuals.
Ability to communicate effectively one-on-one with other employees of the organization.
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Ability to apply common sense understanding to carry out detailed but uninvolved written and oral instructions.
Must possess good mechanical ability and the ability to perform basic calculations to operate welding and fabricating machines.
Demonstrates ability to operate a welder, grinder, bandsaw, ironworker, overhead crane, torch, measuring devices and a variety of hand and power tools.
Prior work record indicating dependability and conscientiousness.
Must be willing to work in a team-oriented environment.
About Us
At Samuel, we believe every team member brings unique and valuable skills, experiences and knowledge to our thriving business - enabling us to build on over 170 years of success in the metals industry. We offer countless opportunities for our team members to develop and grow in their careers, empower them to make decisions on the job and be a part of driving positive change - within our organization and in the communities where we live and work. If you're seeking a dynamic, supportive and welcoming workplace to make your mark and grow your career, we have the programs, culture and opportunities to make it happen. We're stronger together.
At Samuel we believe in a culture of equality. Respect and integrity are at our core. We are committed to building and creating an environment that is open and welcoming for everyone.
This job posting is for an existing vacancy within the organization
Samuel is an Equal Opportunity Employer. In the United States, we utilize E-Verify.
About the Team
Samuel Pressure Vessel Group is a global leader in the design, manufacture and distribution of pressure vessel solutions. We offer a wide range of capabilities in fabricating stock, custom & engineered-to-order vessel designs. Whether you need an ongoing supply program for small standard vessels or have a one-time requirement for large engineered-to-spec pressure vessels, our experienced team is ready to assist you.
Description
:Overview of Unit/DepartmentAt CoxHealth, our Central Staffing Office team plays a crucial role in delivering exceptional patient care across our diverse facilities.This position enables those who travel nurse a way to transition into a full-time, fully-benefited, non-contract position with a comparable salary while keeping the diversity they love.
Our Internal Agency team is essential not only for supporting our hospitals but also for enhancing our community outreach, ensuring a comprehensive approach to patient care and resource management.
This truly allows us to be the best for those that need us! This position offers a remarkable opportunity for professional growth and development within a dynamic and supportive environment.
Embrace this unique chance to advance your nursing career and make a significant impact on patient care.
Join us today!Additional Information About the Position for Qualified Candidates•Up to $10,000.00 Sign-On Bonus • Up to 80 hours of front-loaded Paid Time Off • Up to $3,000.00 Relocation bonus • $1.00 Certification pay• $1.00 BSN pay • Career Ladder Bonus eligible up to $5,000.00Job SummaryThe float critical care nurse provides direct and individualized care to acutely and critically ill patients, in a highly technical and ongoing monitoring environment.
They assess the patient's condition, perform diagnostic tests, begin treatments and assist doctors with any required medical procedures.
The critical care nurse monitors and adjusts specialized equipment, interprets and records electronic displays; i.e.
intracranial pressures, central venous pressures, pulmonary artery pressures, cardiac rhythms, ventilator settings, etc.Education: Required: Graduate of an accredited nursing program or NLN approved program Preferred: Bachelor's Degree in Nursing Experience: Preferred: Previous nursing experience Skills: Excellent verbal and written communication skills Demonstrate effective leadership abilities Exhibits valuable time management skills Strong critical thinking/problem solving skills.
Flexibility and ability to work in a multi-tasking environment.
Licensure/Certification/Registration: Required: RN license active in the state of Missouri
At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience.
As a Ground Maintenance Technician (GMT) in a stationary role, you will be a part of Delta's Ground Support Equipment team. A GMT (Stationary) specializes in completing repairs and utilizes preventive maintenance on motors and controls, Programmable Logic Controllers (PLC), pneumatic systems, conveyor systems, and machine shop equipment. The ideal candidate is proficient in the use of diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications to resolve malfunctions and maintain equipment.
Summary of responsibilities:
- Locates sources of problems by observing mechanical devices in operation and repair with precision measuring and testing instruments.
- Determines changes in dimensional requirements of parts by inspecting used parts and using rulers, calipers, micrometers, and other measuring instruments.
- Ensures the proper functioning of mechanical, electro-mechanical, and electronic equipment by troubleshooting, repairing, maintaining, and calibrating industrial equipment and test equipment throughout Stationary GSE in accordance with approved manuals and procedures.
- Maintains equipment, parts, and supplies inventories by checking stock to log inventory levels; anticipating need; placing and expediting orders; and verifying receipt.
- Prepares maintenance reports by collecting, analyzing, and summarizing information and trends.
The minimum starting hourly rate for this position is $36.22 with the ability to increase your hourly rate within 6 months of your start date, based upon premiums offered. Examples include but are not limited to CIMM Certification, Shift differential, and Skill differential.
Eligible Delta employees based in New York City (JFK or LGA) can be reimbursed up to $250 per month for specific transportation expenses incurred while traveling to and from work. Employees using public transit, including trains, buses, subways, ferries or van pools to get to and from JFK or LGA may be eligible.
Qualified candidates must also possess at least one of the following:
- Electrical/Relay knowledge: Understanding and proficiency in repairing 12 to 50 VAC/DC control circuits, 120 VAC single-phase electrical circuits and control circuits, 480 VAC 3-phase electrical systems.
- PLC Controls/Network: Proficiency and knowledge of repairing PLC and the associated computer network systems. Allen Bradly PLCS, SLC 500, SLC 5000 and Micro Logix systems.
- Industrial Maintenance/Conveyor Systems/Passenger Loading Bridges (PLB): Knowledge of system operations for PLB, system operation for conveyor systems and heavy equipment maintenance on hydraulics/electrical/mechanical on large industrial machinery.
- Industrial A/C refrigeration: Knowledge of high-pressure point-of-use pre-condition air systems, low-pressure glycol chiller systems, and repair and isolate system failures, as well as the related software for both high- and low-pressure control circuits systems.
- 400 Hz Generator/Inverter Ground Power: Strong understanding of electronic and electrical components and proficiency at identifying problems and repairing and rebuilding them. A background in 400 Hz, testing equipment as needed to perform repair/overhaul, and the ability to read electrical schematics and drawings are required. Familiarity with Jetpower II, Jetpower Plus, and CSI units. Experience operating passive and resistive load banks and working in an electronics environment.
Delta Air Lines will never ask candidates for money throughout our recruitment process, including for any pre-employment screenings. All email communications with Delta's recruitment team will come from a Delta email domain. If you have any questions about the legitimacy of an outreach from Delta's recruitment team, you can contact
Internal Movement Eligibility
Internal Employees: Before applying for this position, please reference the company's Internal Mobility Policy and Residency Policy to ensure you meet all eligibility requirements. You must be in good standing, which includes meeting performance standards and tenure requirements in your current role. For more information, visit the HR portal or contact your manager or HR representative. Compliance with these policies is mandatory for consideration.What you need to succeed (minimum qualifications)
- Consistently prioritizes safety and security of self, others, and personal data.
- Embrace diverse people, thinking, and styles.
- Possesses a high school diploma, GED, or high school equivalency.
- Is at least 18 years of age and has authorization to work in the United States.
- Must have a valid driver's license.
- Must be proficient in English.
- Ability to lift items weighing between 50 and 70 pounds.
- Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays.
- Completion of a two-year degree at a post-secondary technical school or have a minimum of three years of demonstrated ability.
- Must achieve a satisfactory score on entry tests structured to determine ability to perform required tasks.
- A detailed understanding of mechanical, electrical, hydraulic, and pneumatic subject areas.
- Ability to read, comprehend, and apply information found in technical documents, manuals, and schematics.
- Strong communication while working as a team and coordinating repairs with other GMTs and outside vendors.
- Respond to customers' needs with minimum direction and perform repairs in time-sensitive situations.
Benefits and Perks to Help You Keep Climbing Our culture is rooted in a shared dedication to living our values – Care, Integrity, Resilience and Servant Leadership – every day, in everything we do. At Delta, our people are our success. At the heart of what we offer is our focus on Sharing Success with Delta employees. Exploring a career at Delta gives you a chance to see the world while earning great compensation and benefits to help you keep climbing along the way:
- Competitive salary, industry-leading profit sharing program, and performance incentives.
- 401(k) with generous company contributions up to 9%.
- New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 – March 31).
- In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period.
- LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program.
- 10 paid holidays per calendar year.
- Birthing parents are eligible for 12-weeks of paid maternity/parental leave.
- Non-birthing parents are eligible for 2-weeks of paid parental leave.
- Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits.
- Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages.
- Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health.
- Domestic and International space-available flight privileges for employees and eligible family members.
- Career development programs to achieve your long-term career goals.
- World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint.
- Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies.
- Recognition rewards and awards through the platform Unstoppable Together.
- Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.
