Safe Space Llc Jobs in Usa

At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz.

As an Industrial Control Systems and Automation Program Manager, you will work with the maintenance teams to deep dive issues and opportunities within the control systems for conveyance, sortation systems, automated baggers, robotic systems, and more. You will develop instructor led technical training materials on these systems and deliver training to controls and automation technicians across the network. You will also provide technical support and serve as the Installation and Operational Qualification controls lead for new launch sites. This role is the resident expert in automation and controls, and will lead the technical training program.

You will..

• Demonstrated hands-on experience within controls or automation environments
• Exposure to supporting live systems or production operations
• Experience mentoring, coaching, or developing technical team members
• Expected to support and develop other controls engineers and serve as a point of escalation for all of our brands, and a baseline level of hands-on controls experience
• Practical exposure to PLC troubleshooting and diagnostics
• Maintain compliance with all safety, food safety, and security standards.
• Create and execute training classes specifically focused on technicians' needs.
• Review and give input on vendor quotes, service level agreements, and planned maintenance agreements.
• Travel to multiple locations to provide instructor led training to controls technicians.
• Participate in the interview and selection process for controls technicians.
• Perform troubleshooting of assigned equipment and provide corrective action plans when deficiencies are identified.
• Act as an escalation point and remote troubleshooting resource for controls technicians and escalate to leadership and/or vendors as needed for additional troubleshooting.
• Drive compliance on relevant OSHA, NFPA70E, and NEC regulations.
• Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate.
• Mentor all maintenance personnel in developing appropriate skill sets and knowledge of equipment, specializing in controls and automation systems.
• Act as a network resource for controls related technical issues and lead network-wide root cause analysis.
• Partner with Engineering on the commissioning of new systems.
• Audit vendor work to provide feedback to leadership on quality of work and SLA performance.
• Write and/or modify PMs to standardize across the network and increase effectiveness.
• Perform building project work as assigned..

Mandatory Requirements

You have..

• 5 - 7 years of experience maintaining and repairing large control systems, including PLCs, HMIs, VFDs, fieldbus, reader/vision systems.
• Advanced understanding of electrical and mechanical troubleshooting.
• Advanced computer skills, including Microsoft Office.
• Knowledge of general construction standards and techniques.
• Ability to read and understand drawings, schematics, and diagrams.
• In depth experience and knowledge of industrial OSHA, NFPA70E, and NEC requirements.
• Ability to travel as necessary (up to 75%) for business purposes.
• High School diploma or equivalent.

• The ability to motivate learning and thrive in a teaching/training role.
• Acute understanding of electro-mechanical circuitry and it's functionality.
• Excellent follow through, judgment, and common sense. "Make it happen" attitude.
• Comfortable working in cold environments with some areas of facility at 40F.
• Excitement for working in a start-up environment with a high level of ambiguity and change.
• High level of integrity and ethics with excellent follow-through.

You'll get...

• Competitive Salary & 401k company match that vests immediately upon participation

• Generous parental leave of 4 weeks & PTO policy, as well as paid holidays off

• $0 monthly premium and other flexible health plans

• Amazing discounts, including up to 75% off HelloFresh subscription

• Flexible scheduling & advancement opportunities

• Emergency child and adult care services

• Snacks & monthly catered lunches

• Collaborative, dynamic work environment within a fast-paced, mission-driven company

This job description is intended to provide a general overview of the responsibilities. However, the Company reserves the right to adjust, modify, or reassign work tasks and responsibilities as needed to meet changing business needs, operational requirements, or other factors.

Colorado Pay Range

$95,890—$115,400 USD

Texas Pay Range

$89,200—$107,350 USD

Newark, NJ Pay Range

$102,600—$123,450 USD

Arizona Pay Range

$89,200—$107,350 USD

Illinois Pay Range

$95,890—$115,400 USD

About HelloFresh

We believe that sharing a meal brings people of all identities, backgrounds, and cultures together. We are committed to celebrating all dimensions of diversity in the workplace equally and ensuring that everyone feels a sense of inclusion and belonging. We also aim to extend this commitment to the partners we work with and the communities we serve. We are constantly listening, learning, and evolving to deliver on these principles. We are proud of our collaborative culture. Our diverse employee population enables us to connect with our customers and turn their feedback into meaningful action - from developing new recipes to constantly improving our process of getting dinner to our customers' homes. Our culture attracts top talent with shared values and forms the foundation for a great place to work!

At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Company's commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities.

We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form.

To learn more about what it's like working inside HelloFresh, follow us on Instagram and LinkedIn.

HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at:

• Europe:
• APAC:
• United States:
• Canada:

SUMMARY

As a Mechanic (Class B), this position is responsible for repairing and maintaining company-owned equipment. The Mechanic is accountable for diagnosing issues and making necessary adjustments, repairs, or overhauls on various heavy machinery used in heavy civil, railroad, and marine construction.

JOB DUTIES AND RESPONSIBILITIES

• Plan and schedule regular maintenance for industrial machines and equipment. Maintain accurate equipment service records.
• Conduct planned maintenance by examining parts for damage or excessive use, repairing and replacing damaged or worn parts, cleaning, lubricating, assembling, and testing equipment to ensure operational efficiency. May install batteries and windows on specific equipment.
• Diagnose and examine faults or malfunctions in equipment to determine repairs using engine diagnostic equipment such as computerized tests and calibration devices.
• Order materials and supplies needed for repair and maintenance of equipment.
• Test mechanical equipment after repair or assembly to ensure proper performance and compliance with the manufacturer’s specifications, which may include the assembly of gear systems, aligning frames and gears on heavy equipment, and/or fitting the proper bearings for mobile mechanical, hydraulic, and pneumatic equipment.
• Adjust and maintain industrial machinery using control and regulating devices.
• Perform general facility maintenance and clean-up tasks.
• Perform other related duties as assigned.

REQUIRED QUALIFICATIONS

• Education: Must possess a Transportation Worker Identification Credential (TWIC) or be willing/eligible to obtain one upon hire. Must have a valid driver’s license.
• Experience: Five (5) years of experience maintaining and repairing heavy equipment, hydraulic cranes, and friction cranes.
• Knowledge/Skills/Abilities (KSA): Must possess strong written and verbal communication skills in English to effectively present information and respond to questions from managers, clients, and customers. Must possess the ability to read and understand operating manuals, blueprints, and technical drawings. Proficient in the use of computer diagnostic equipment and software. Must provide tools required to work on cranes and heavy equipment.

PREFERRED QUALIFICATIONS

• Experience: Seven (7) years of experience maintaining and repairing heavy equipment, hydraulic cranes, and friction cranes.
• Knowledge/Skills/Abilities (KSA): General knowledge and skills in marine operations, such as pile driving, welding, crane operations, barges, etc. General knowledge and understanding of basic construction terms and concepts.

WORKING CONDITIONS

• The individual must be able to perform the essential functions of the job with or without reasonable workplace accommodation.
• The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes a hard hat, safety glasses, life vest, respirators, ear plugs, steel-toed shoes, personal floatation devices (PFD), and/or other protective equipment.
• The individual frequently works near moving mechanical parts and must be able to adapt to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration.
• The individual may be required to work long hours and/or weekends. Additionally, some out-of-town or overnight travel may be required.
• The individual may occasionally be required to sit in a vehicle for up to 8 hours.
• The individual may be required to walk, step, climb, or otherwise move from one location on the job site to another, which may be of varying heights and access parameters.
• The individual may occasionally be required to stand, stoop, bend, crouch, kneel, climb, or sit for long periods.
• The individual may be required to work in confined spaces, climb vertical ladders of a height of 6 ft. or greater, and/or elevated heights.
• The individual may be required to lift objects with a minimum of 10 lbs. and a maximum single-person lift of 50 lbs. This could result in frequent lifting or carrying depending on project needs.
• The individual must meet specific vision abilities, such as close vision and color vision.
• The individual may be required to perform repetitive movements by feet, shoulders, arms, wrists, hands, and back in the performance of work.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training and actively work toward maintaining a safe workplace. Employees are authorized and obligated to stop work on any task or series of tasks whenever an unsafe condition or situation is anticipated or is observed as well as bring problems to the attention of the immediate supervisor, HSE Manager, or HR Manager. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Employment at Russell Marine, LLC is on an “at-will” basis. There is no contract of employment between Russell Marine, LLC and any one or all of its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Only the Owner or President has the authority to modify the at-will relationship, and then only in writing specifically addressed to the employee on this issue and signed by that Russell Marine, LLC Executive.

Russell Marine, LLC is proud to be an equal opportunity employer and does not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other protected status. If you require special assistance or accommodation while seeking employment with Russell Marine, LLC, please contact Human Resources at

Based in Houston, Taurus Industrial Group (Taurus) is a leading, integrated and industry-diversified technical services company offering end-to-end services across multiple service lines. Leveraging a growing footprint with operations in the U.S., Canada, and Mexico, Taurus’s service offerings cover engineering and automation, electrical and instrumentation, power systems testing and commissioning, civil and mechanical crafts, pipe and structural steel fabrication, rotating equipment maintenance and repairs, full-service soft crafts, insulation and scaffold, specialty tooling and machining, technical bolting, heat treating, hot-tapping, line stopping and NDT / inspections.

With over 60 years of continuous, safe, and reliable operating experience, Taurus operates across multiple industries and sectors, providing front-end engineering, routine maintenance, capital projects, and turnaround services. We service multiple areas of the energy industry, from our origins in traditional petrochemical and refining industries to the broader power, natural gas, midstream, industrials, and the emerging renewables market.

Location: Beaumont, Texas

About the Role:

The Sheet Metal Welder is responsible for fabricating, modifying, installing, and repairing sheet metal components used in a chemical plant setting. This role requires advanced welding and metal-fabrication skills, strict adherence to safety standards, and the ability to work within operations that include hazardous materials, confined spaces, and process-safety protocols..

Minimum Qualifications:

• High school diploma or GED required; trade school or technical certificate preferred
• 2+ years sheet metal welding and fabrication experience (chemical or industrial manufacturing environment strongly preferred)
• MIG/TIG proficiency; AWS certification preferred
• Ability to read fabrication drawings, weld symbols, and plant schematics
• Valid site-specific safety training preferred
• Ability to safely operate shop equipment (shears, press brake, rollers, saws, grinders, etc.)
• Knowledge of corrosion-resistant metals and welding procedures suitable for chemical exposure environments
• Ability to lift 50+ lbs and perform physical work in industrial conditions (heights, confined spaces, varying temperatures)

Responsibilities:

• Interpret blueprints, P&IDs, isometric drawings, and job specifications
• Fabricate, weld, install, and repair sheet metal systems, ductwork, hoods, guards, platforms, and equipment components
• Perform TIG and MIG welding on stainless steel, carbon steel, and specialty alloys commonly used in chemical plant applications
• Cut, bend, roll, and shape sheet metal using fabrication machinery and hand tools
• Conduct hot-work in accordance with plant permit systems and fire-watch requirements
• Prepare surfaces and complete welding and fabrication tasks with precision
• Inspect completed welds and fabrications to ensure compliance with standards and tolerances
• Adhere to chemical plant safety standards, including lock-out/tag-out, respiratory protection, hot-work permitting, confined-space entry, and hazard communication
• Maintain housekeeping standards and ensure safe handling of materials and tools
• Work collaboratively with maintenance, reliability, and operations personnel
• Document work performed and report issues promptly
• Maintaining welding equipment and tools
• Ensuring that all work is completed to the highest standards of quality and safety
• Collaborating with other members of the team to ensure that projects are completed on time and within budget

Skills:

• Key Skills & Competencies
• Strong safety mindset and adherence to process-safety rules
• Precision welding and fabrication abilities
• Problem-solving and troubleshooting skills
• Effective communication and teamwork
• Ability to follow detailed procedures and maintain documentation
• MUST BE ABLE TO WELD SS AND CARBON

BE SURE TO APPLY ON OUR WEBSITE:

Sr CSA Data Center Superintendent

Weeks Group is a leading data center Owner’s Representative & Project Manager consulting firm with decades of experience overcoming complex mission critical challenges globally. As a women-owned business, we excel in solving tough problems, ensuring safe, timely, on budget delivery. We solve the hardest problems in the data center construction industry.

Our Values

We Answer the Call

Integrity • Honesty • Trust • Nimbleness

We Don’t Take No for an Answer

Persistence • Determination • Accountability

We Solve Problems

Especially on complex, high-intensity projects

We Expect the Best from Each Other

Teamwork • Communication • Ownership

We BTFM

Innovative thinking with zero tolerance for mediocrity

Role Summary

The Senior CSA Superintendent leads field execution of Civil, Structural, and Architectural (CSA) scope on mission-critical data center projects. This role owns day-to-day site leadership for CSA work: site logistics, safety, schedule, subcontractor coordination, quality, and turnover readiness. The CSA Superintendent drives predictable production, enforces standards, and ensures work is installed safely, correctly, and in sequence with MEP/commissioning needs.

This is a hands-on field leadership role for someone who thrives in fast-paced environments, holds trade partners accountable, and keeps the project moving with clarity, urgency, and professionalism.

Projects Include

• Ground-up hyperscale and enterprise data center buildings
• Brownfield upgrades and retrofits in operating facilities
• Campus expansions and critical infrastructure additions
• Large fit-outs and accelerated customer deployment work

Key Responsibilities

Field Leadership & Safety (Primary)

• Lead CSA field operations while reinforcing a zero-incident culture.
• Partner with project safety leadership and subcontractors to implement site-specific EH&S plans, JSAs/AHAs, permitting, and housekeeping standards.
• Conduct regular safety walks; correct unsafe behaviors immediately and escalate as needed.

CSA Scope Execution (Primary)

• Direct and coordinate all CSA activities including: site civil, earthwork, concrete, foundations, underground utilities (as applicable), structural steel, envelope, roofing, architectural buildout, doors/frames/hardware, exterior finishes, and interior buildout.
• Ensure CSA work supports MEP rough-in, equipment setting paths, commissioning access, and turnover sequencing (clearances, access panels, curbs, housekeeping pads, etc.).
• Maintain strong daily communication with MEP superintendents to avoid trade stacking and rework.

Schedule & Production Management (Primary)

• Own CSA short-interval planning (daily/weekly) and support pull planning with measurable commitments.
• Track manpower, production rates, constraints, and deliveries; proactively communicate schedule risks and recovery plans.
• Align CSA milestones to overall project milestones (dry-in, permanent power readiness support, white space readiness, turnover phases).

Quality Control (Primary)

• Enforce CSA quality standards and installation tolerances; drive “build it right the first time.”
• Lead and document quality walks; manage deficiency logs and punch lists to closure.
• Ensure clean build practices aligned with data center requirements (dust control, protection of installed work, critical space readiness).

Logistics & Site Control (Primary)

• Manage CSA laydown, access routes, lifting plans coordination, concrete/steel deliveries, material staging, and housekeeping.
• Coordinate sitewide logistics with the General Contractor/CM and other scopes to keep the job moving without congestion.

Coordination & Communication (Primary)

• Lead/participate in key field meetings: subcontractor coordination, foreman huddles, look-aheads, constructability reviews, and progress walks.
• Communicate issues early with clear options, impacts, and recommended paths forward.
• Coordinate with AHJ/inspectors for CSA-related inspections and closeouts.

Procurement Support (Supporting)

• Track CSA long-lead items (steel, precast, envelope systems, roofing, doors/hardware, specialty architectural items).
• Confirm lead times, delivery windows, and readiness of areas for install.

Turnover & Closeout (Primary)

• Drive CSA punch, closeout, and turnover readiness by area/phase.
• Coordinate turnover requirements with PM/QAQC/commissioning teams: as-builts, O&M where applicable, attic stock, warranties, test reports, inspection sign-offs.
• Ensure spaces are ready for commissioning activities and operational turnover (clean, labeled, accessible, complete).

Leadership & Culture (Primary)

• Be the leader in the room: set expectations, model accountability, and build strong trade partner relationships.
• Promote Weeks standards: proactive problem solving, high tempo execution, and respectful coordination.
• Mentor junior superintendents/field engineers and help develop consistent field processes.

Knowledge, Skills & Abilities

• Deep CSA field expertise on complex commercial/industrial builds; mission-critical/data center experience strongly preferred.
• Strong command of means and methods, sequencing, constructability, and schedule logic.
• Ability to read/interpret drawings/specs and enforce quality with subcontractors.
• Proven ability to lead multiple CSA subs simultaneously in a high-intensity environment.
• Strong communication, conflict resolution, and decision-making under pressure.
• Comfortable with field technology (Procore/ACC, Bluebeam, MS Office) and daily reporting.
• Understanding of CPM schedule logic and short-interval planning.

Experience & Education (Typical)

• 10+ years in commercial/industrial construction with significant CSA superintendent leadership experience.
• Data center / mission-critical experience preferred (or comparable high-spec industrial work).
• OSHA 30 preferred (or willingness to obtain).

Compensation & Benefits

• Competitive base salary based on experience and project scope.
• Performance-based bonus potential.
• Fully paid comprehensive benefits (medical, dental, vision) for you and your family.
• 401(k) Safe Harbor plan.
• Paid time off (PTO).
• Opportunity to work on technically complex data center projects in a high-performance environment focused on long-term growth and leadership development.

We are seeking a motivated and experienced, Tungsten Inert Gas (TIG) Welder to join our aerospace manufacturing team. This position is ideal for individuals who have experience and are eager to grow within a structured and supportive environment. You will assist in the welding, fabrication, and assembly of propellant space tank systems and sub-assemblies.

Pay Range: $40 to $60 per hour.

• Weld, assemble, and fabricate various propellant space tank systems and sub-assembly components using GTAW (TIG) welding methods
• Use precision-calibrated tools such as torque wrenches, micrometers, and calipers to ensure quality and accuracy
• Perform work in accordance with detailed procedures, specifications, and test instructions
• Read and interpret technical drawings and manufacturing work instructions
• Utilize various mechanical tools and equipment with minimal supervision
• Operate forklifts, overhead cranes, and other heavy equipment safely
• Perform surface preparation processes such as blending, filing, and abrading of flight hardware
• Maintain a clean and organized workspace, ensuring compliance with safety standards
• Support team members with additional duties as required to ensure efficient operations

Qualifications:

• Minimum 5 years of aerospace welding experience
• High school diploma or GED required
• Technical training or certification in TIG welding
• Understanding of GTAW techniques and material weldability
• Ability to read blueprints or technical drawings
• Willingness to learn and follow precise instructions and procedures
• Strong attention to detail and pride in workmanship
• Ability to work well in a team and communicate effectively
• Comfortable working with hand tools and shop equipment
• Forklift or crane certification is a plus

Work Environment:

• Aerospace clean room and shop environment
• Exposure to high-precision components and tight tolerances
• Regular lifting of up to 50 lbs and standing for extended periods

This position is currently accepting applications.

Apply Now

DO YOU ENJOY TRAVELING TO DIFFERENT LOCATIONS INSTEAD OF BEING STUCK IN ONE PLACE ALL DAY?

DO YOU LIKE WORKING WITH PEOPLE FROM DIFFERENT BACKGROUNDS AND BUILDING STRONG TEAMS?

DO YOU FEEL SATISFIED WHEN YOU WALK INTO A FACILITY AND SEE EVERYTHING CLEAN, ORGANIZED, AND RUNNING THE RIGHT WAY?

IF YOU TAKE PRIDE IN LEADING PEOPLE, SOLVING PROBLEMS, AND MAKING A REAL DIFFERENCE IN THE QUALITY OF A FACILITY — THIS IS THE OPPORTUNITY YOU’VE BEEN LOOKING FOR!

Company Description

Goal Cleaning LLC is a premier provider of commercial cleaning services, dedicated to transforming spaces with precision and care. Known for delivering sparkling results, the company focuses on creating clean, welcoming, and safe environments. With a commitment to excellence and client satisfaction, Goal Cleaning LLC is a trusted partner for businesses seeking top-tier cleaning solutions. The company serves a wide range of industries, maintaining the highest standards of cleanliness and professionalism.

Cleaning Supervisor – Greater Philadelphia, PA

Are you a hands-on leader with a passion for maintaining high standards and managing teams? Goal Cleaning LLC is seeking a full-time Cleaning Supervisor to oversee operations across multiple facilities in the Greater Philadelphia area. You’ll lead, inspire, and coordinate cleaning teams, ensuring every client receives exceptional service.

What You’ll Do:

• Supervise cleaning staff across multiple locations, ensuring consistent quality and client satisfaction
• Plan and manage daily schedules, assign teams, and conduct regular inspections
• Maintain cleaning equipment and ensure adherence to safety and sanitation standards
• Track inventory, provide hands-on training, and support staff development
• Serve as the main point of contact for clients, addressing inquiries and feedback promptly

What We’re Looking For:

• Proven leadership and supervisory skills, preferably managing teams across multiple sites
• Knowledge of commercial cleaning methods, equipment, and safety standards
• Strong organizational, time management, and communication skills
• Detail-oriented with a commitment to excellence and customer satisfaction
• Flexible and able to adapt to varying schedules and client needs
• Experience in cleaning or facilities management is a plus
• High school diploma or equivalent; certifications in cleaning or facility management are a bonus

Why Join Us:

• Lead a growing team in a company that values professionalism and excellence
• Opportunity to make a visible impact across multiple facilities
• Competitive salary, performance incentives, and travel reimbursement

• 
  
• Complies with craft and shipyard safety and environmental measures.
  
• Works from ship specifications, work orders and applicable working drawings and blueprints, i.e., form, shape, fit, and weld on vessels.
  
• Performs burning and effectively uses scarfing tip for clean-up, bevel parts, etc.
  
• Performs Arc welding - SMAW, FCAW, GMAW is a plus
  
• Performs carbon arc gouging for weld preparation and cleanup.
  
• Properly cares for and safely uses hand and power tools.
  
• Coordinates the performance and completion of job specifications.
  
• Incumbent performs similar work in all areas of the Yard as the need arises.
  

• 
  
• Communicates effectively, work independently or in a group.
  
• Ability to do basic math, i.e. add, subtract, divide and multiply, including fractions.
  
• Ability to read, write, speak, and comprehend English.
  
• Thorough knowledge of marine fitting including compound shapes.
  
• Ability to do square footage and weight calculations if required.
  

• 
  
• High School diploma or GED preferred.
  
• 2-6 years relevant work experience.
  
• Proven skills, work history and/or applicable education will be considered in lieu of work experience.
  

• 
  
• Capable of passing GMAW weld test.
  
• 2G, 3G, 4G Aluminum weld test on 3/8 plate to AWS D1.2 weld standards.
  
• Able to consistently pass UT/RT/PT weld joint
  
• SMAW, FCAW, GTAW experience is helpful.
  
• Four-hour fire watch certification
  
• HAZWOPER- First Responder Awareness Level.
  

• 
  
• Interaction/communication with others: Frequently interacts with others to ensure ongoing safety of operation. May work with several individuals in a confined space.
  
• Works alone/independently: Frequently works in the presence of other individuals performing duties.
  
• Directs/supervises others: Not Required.
  
• Repetitive work: Work is similar on a day-to-day basis.
  
• Attention to detail: Must perform all tasks in compliance with regulatory agency standards.
  
• Flexibility: May move from one job to another, unexpectedly.
  
• Other mental/psychological demands: Works in a noisy environment and works at heights.
  

• 
  
• Works indoors: Frequently works indoors exposed to temperature variances, vibrations, humidity, chemicals, dust and noise.
  
• Works outdoors: Frequently works on shipboard exposed to typical outdoor weather.
  
• Safety equipment required: Wears welding helmet, long pants, long sleeved shirt, eye protection, hearing protection, respirator, hard hat, and leather shoes.
  
• Other Exposures: Smoke, acids, degreasing cleaners, fumes, free silica, asbestos, dust, weld flash, paints, solvents, oil and grease.
  
• Operation of equipment/tools/vehicles: Uses grinders, hand/power tools, air torches, welding machines, comealong, chainfall, hammer, wedges, wire feeders, compressed gas tanks, plate shears, automatic multihead burning machine, hydraulic press and punch, large and small plate rolls, carbon saw, large surface slab for securing fabrication, overhead and jib cranes and rigging, drill presses and a complete range of handtools.
  
• Required hygiene standards: Per company standards.
  
• Other: None
  

The Environmental Health & Safety Manager (EHS) is responsible to ensure compliance with all safety rules and regulations, the physical security of all company locations, and to assist individuals to be in compliance. This position is responsible for ensuring company is in compliance with all agencies (DOT, OSHA, NFPA, and EPA) regulations, training, and any other requirements by such agencies, our insurance companies, and company requirements. The EHS Manager will serve as a subject matter expert on all safety, compliance, regulatory and related insurance requirements.

Pay Range: $120,000 to $135,000.00 per year

Essential Duties and Responsibilities include the following. Other duties may be assigned.

• 
  
• Serve on local safety committees; review and discus safety needs, provide updates, training, DOT, Hazmat, OSHA and related safety and compliance information.
  
• Implement and manage a comprehensive safety training program base on OSHA and industry specific requirements.
  
• Manage the workplace ergonomics program, active response and adjustments result in negating any mandatory program requirements.
  
• Review facility procedures and work instructions consistent with ISO formatting.
  
• Develop Safety Risk Assessment procedures
  
• Provide subject matter expertise in Process Safety ensuring industry best practice.
  
• Site inspections and corrective action(s):
  
• Train and direct management to inspect facilities, work sites and equipment for violations and hazards.
  
• Provide direction to management on correcting identified problems in a timely manner.
  
• Follow up to make sure all corrective actions were taken and completed.
  
• Assist where needed.
  
• Responsible for updating, maintaining and auditing location safety standards and procedures on a quarterly or annual basis as needed.
  
• Develop effective training programs for managers/employees that will efficiently cover all needed/required materials.
  
• Investigate all accidents to determine the root cause and provide recommendations that eliminate or reduce future hazard or risk.
  
• Track and control inventory of safety supplies and equipment and work with division managers to keep adequate safety supplies on-hand.
  
• Assist with training for new hires and provide ongoing training of all employees.
  
• Review and update MSDS and SPCC plans as needed
  
• Evaluate the effectiveness of the safety program using established goals and make recommendations, and implement corrective action(s) based on industry standards and best practices.
  
• Conduct an annual training for the site that promotes a safe, healthy, and secure work environment that includes emergency situations (like tornados, fires), use of the alarm system, and anything else necessary to promote a safe work environment.
  
• Serves as a safety/compliance liaison with outside organizations.
  

Required Skills:

? Extensive knowledge of OSHA, DOT, NFPA, EPA, other governmental regulations and laws including OSHA 300 logs and requirements by our insurance providers.

? Knowledge of instructional methods and training techniques

Qualifications:

? Bachelor's degree in safety or related field or equivalent work experience.

? 5 years safety management experience.

? Excellent interpersonal, communication, and problem solving skills.

? Knowledge of statistics, data collection and analysis.

? Knowledge of federal and state regulations.

? Proficient in MS Office products.

? Occasional travel required.

Prefer:

? OSHA General Industry 10 or 30 hour training course

? Forklift training experience

This position is currently accepting applications.

Apply Now

Safety Coordinator

Basic Purpose

Chiefly responsible for ensuring the highest possible level of operational safety and asset protection across designated job site, reducing and controlling CCI exposures to injury and accident risks and perils, while ensuring operational regulatory compliance with all appropriate state and federal regulations. Must possess at least OSHA 30 certification.

Essential Functions/Duties

• Manage all EH&S task related to rigging, mechanical and piping installations disciplines.
• Implementation of CCI & customer EH&S procedures/protocols.
• Daily tool box talks.
• Manage and coordinate permits (hot work, JSA's, LOTO, etc) with crew and customer representatives.
• Perform and document daily audits/observations.
• Support project team with EH&S reporting and customer deliverables.
• Coordinate task specific training that may be required with CCI Project Manager, Crew and EH&S Management team.
• Identify, plan and coordinate the EH&S execution of hazardous work that exist within the work area.
• Identify hazardous conditions and provide solutions to project team to implement procedures, tools and/or equipment to execute task safely.
• Reporting of daily crew size and members to ensure all employees are accounted for in the event of incident/evacuation.
• Conducts Health and Safety Training Programs and maintains all records as needed.
• Directs and conducts site facility walk-through inspections, safety audits and documentation reviews relative to OSHA, MSHA, DOT, EPA, DHS regulations and reports findings to Corporate Management.
• Investigates the causes of all accidents and injuries, and completes reports as required. Uses Accidents/near misses, etc. as training to help prevent future occurrences.
• Inventories and maintains appropriate quantities of all necessary safety equipment and PPE.
• Other duties as assigned.

Knowledge, Skills & Abilities:

• 4 years verifiable experience as Safety Professional.
• Must have OSHA 30
• OSHA 510 and 500 a plus.
• Must be able to climb and not be afraid of heights.
• Regular attendance is required.
• Significant travel may be required.
• Performs other duties as required.

Working Conditions/Physical Effort

Conditions include working in office, shop, busy traffic areas, warehouses, and undeveloped properties, with frequent exposure to dirt, dust, grease, oil, vibrations, and adverse weather conditions. Must be able to safely access all areas of property, buildings, structures, wharves, rooftops and other elevated positions, as well as, confined spaces. Must be able to effectively use all required PPE equipment and lift up to fifty pounds. Strenuous physical demands are required to safely perform the essential functions associated with this position. Must be able to safely operate all involved equipment and tools. Must be capable of standing for long periods of time, bending consistently, working in confined spaces with limited access, on ladders, in personnel lifts, in work boots, working in awkward body positions and able.

*Nothing in this job description restricts the Company’s right to assign or reassign duties and responsibilities to this job at any time.

Century Contractors offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success.

We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. EOE M/F/Vet/Disabled