Riverfront Machine Jobs in Usa

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Boeing Commercial Airlines is excited to offer opportunities for a Numerical Control Tape Laminator Operator to join our Fabrication team in Everett , Washington.

Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices. Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results. You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards. Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment. If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.
Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.
Verify that the correct materials and tools are issued and free from visible defects before starting work.
Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.
Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.
Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.
Retrieve and download CNC programs to the machine controller from the mainframe server.
Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.
Move finished parts and tools using appropriate material handling equipment as required.
Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.
Perform quality checks after each operation to ensure parts meet specifications and are free from defects.
Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.

Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

1+ Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.
~1+ Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.
~ Able to stand and walk throughout work shift (6+ hours) as well as carry and lift up to 25 pounds.

1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.
~ Experience working with and around hazardous materials (while using the proper protective equipment).

High school graduate or GED preferred.

Relocation:
~ Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :
~ This position is for a variety of shifts.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

Applications for this position will be accepted until Mar. Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Boeing Commercial Airlines is excited to offer opportunities for a Numerical Control Tape Laminator Operator to join our Fabrication team in Everett , Washington.

Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices. Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results. You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards. Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment. If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.
Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.
Verify that the correct materials and tools are issued and free from visible defects before starting work.
Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.
Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.
Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.
Retrieve and download CNC programs to the machine controller from the mainframe server.
Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.
Move finished parts and tools using appropriate material handling equipment as required.
Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.
Perform quality checks after each operation to ensure parts meet specifications and are free from defects.
Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.

Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

1+ Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.
~1+ Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.
~ Able to stand and walk throughout work shift (6+ hours) as well as carry and lift up to 25 pounds.

1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.
~ Experience working with and around hazardous materials (while using the proper protective equipment).

High school graduate or GED preferred.

Relocation:
~ Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :
~ This position is for a variety of shifts.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

Applications for this position will be accepted until Mar. Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Title
Maintenance Technician

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

As a member of the Maintenance team this role is responsible for effectively troubleshooting mechanical and electrical issues on CNC equipment including aligning equipment and reading schematics. Be familiar with milling and turning equipment. This role is an hourly (non-exempt) classified position.

Pay Range: $45 to $55 per hour

Position Requirements

• Perform mechanical repairs (and rebuild) on all machines
• Perform machine leveling and alignment on all machines
• Pull and replace machine linear guides and ball screws.
• Able to work with complex NC machine up to & including 5 Axis
• Electrical & Electronic: Diagnose, locate and correct malfunctions of electrical & electronic system such as machine controls, recorders, servo/axis drives, servo motors, defective transformers, relays, contactors, fuses, sensors, etc.
• Knowledge of OEM machine controllers (FANUC, Siemens and NIT).
• Working knowledge of tool Probing function for CNC Mill Machines
• Support with scheduling PM, reading report, diagrams and drawings
• Plan, layout, and fabricate replacement parts for major rebuilding of precision machine tools where set up and operation to exacting tolerances is required
• Plan methods required to maintain, test, repair, or modify various types of industrial electronic controls and systems.
• Analyze and coordinate resolutions of technical problems or assist when solving problems including contacts outside own department as required.
• Interface with manufacturers on line tech support when needed
• Ability to work overtime as required by Company
• Recommend improved work methods and procedures, assist in training employs
• Ability to write routine reports and correspondence
• Must adhere to all OSHA and EHS policies and all related procedures
• Perform related work as required

Minimum Qualifications

• High school diploma or General Education Degree (GED) plus 5+ years of CNC maintenance experience
• Must have solid mechanical background of maintenance experience working with CNC machines, pneumatic, hydraulic, electrical, and programmable logic controls as well as having various electrical mechanical
• Must be able to read schematics and parts drawings, perform routine preventive maintenance on machines and facilities, and be proficient with the use of a multi meter.
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
• Competence in shop math such as working with fractions and decimals.
• To perform this job successfully, an individual must have basic computer skills, MS Office program, and have ability to enter data in various software systems.

Desired Characteristics

Strong communication skills

Ability to analyze, rebuild, repair NC machinery and other types of equipment's

Excellent customer service to co-workers, customers, and vendors

Works collaboratively and respects all others

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.

Fanuc certified

Siemens certified

AS100

Training with Mori Seiki, Makino, Cincinnati Milacron, OKK, SNK and Kuraki Machines

Shift
First

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Santa Ana

Category
Maintenance

Req Number
MAI-26-00002

Position
Maintenance Technician

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Non-Exempt

Hiring Manager(s)

This position is currently accepting applications.

Apply Now

Mission-Driven. Honor-Bound. Fairbanks Morse Defense. What's your calling? For the men and women of Fairbanks Morse Defense it's the rapid and effective support of the fleets that entrust us to design, develop, and deliver the best naval power technology on the planet. We're one of the nation's leading marine defense contractors because of the highly trained and dedicated teams that provide reliable power systems, parts, and aftermarket services to the U.S. Navy, Coast Guard, Military Sealift Command, and Canadian Coast Guard. When you join Fairbanks Morse Defense, you join a legacy of commitment that spans 150 years. Fairbanks Morse Defense offers competitive benefits with a wide range of training and development opportunities. Our world-class teams are dedicated to helping every individual achieve their full potential. Discover what it's like to be a part of the Fairbanks Morse Defense team here: Summary:
The company, now part of Fairbanks Morse Defense, is rapidly growing and in need of a Machinist.
The successful candidate will be responsible for setting up and operating CNC mills and/or lathe, while also understanding machining centers, lathes, and other equipment to produce parts to tight tolerances within .001. Experience programming at machine is a big plus. FEC offers a unique working environment that allows a hands-on individual to develop and grow as the company expands its footprint and maintains high performance as a trusted defense contractor.
Key Responsibilities:

• 
  
• Operate 3 or 4 axis machining centers to perform precision machining operations
  
• Participate in continuous improvement activities.
  
• Analyze data and production reports
  
• Review samples, drawings or instructions to understand specifications of output
  
• Plan the sequence of necessary actions for the completion of a job
  
• Take measurements and mark material for cutting or shaping
  
• Select appropriate machines (e.g. lathes) and position or load material for a job
  
• Determine and program size of batches, speed of machine etc.
  
• Monitor machine while working to adjust the feed, maintain temperature and identify issues
  
• Check output to ensure consistency with specifications and discard defects
  
• Keep records of approved and defective units or final products
  
• Set-up and operate manual and CNC machines to manufacture parts to meet engineering blueprints.
  
• Work closely with CNC programmer to ensure that programs manufacture parts that meet drawing specifications.
  
• Support maintenance of tooling, identifying tooling needs and sharpening tooling as necessary
  
• Operation of one or more CNC machines under the direction of supervisors
  
• Minor maintenance on machines
  
• Load programs and perform simple edits as needed
  
• Adhere to company Malpractice & Ethics Policies
  

Qualifications:

• 
  
• High School Diploma (Preferred) or GED
  
• Reliable transportation to and from work
  
• Manual and/or CNC Machining Experience
  
• 3 axis CNC Millsa plus
  
• G&M Code editing a plus
  
• Must be able to use indicators and setting starting coordinates
  
• Use of basic measuring tools
  
• Understand X,Y,Z coordinates
  
• Ability to set up machine and operate it independently (change cutters) adjust speeds, feeds and edits
  
• Troubleshooting skills a plus.
  
• Must be able to lift 30 lbs.
  
• Minimum of 3 years of machining experience. Experience on CNC Mills, Manual Lathes and Mills is preferred.
  
• Ability to interpret shop drawings, layouts and sample parts to determine dimensions and tolerances of finished work pieces, sequence of operation, and set-up requirements
  
• Experience using calipers, micrometers, gauges and other precision measuring instruments is required
  
• Strong attention to detail
  
• Ability to troubleshoot
  
• Fanuc experience is preferable
  
• Good coordination, motor skills, and dexterity
  
• Maintain a clean and safe work environment.
  
• Ensures that all safety procedures are followed as stated on posted signs and in Company policy
  
• Creative thinking and idea generation
  
• Significant manufacturing experience
  
• Ability to communicate information clearly
  
• Ability to collaborate with others and work independently
  

Note: This position requires access or potential access to Unclassified Naval Nuclear Propulsion Information, which is Not Releasable to Foreign Nationals (NOFORN) data. Therefore, to meet NOFORN requirement, you will have to provide proof of US Citizenship and attest that you do not have dual citizenship. Acceptable proof of US Citizenship is a US Passport, US Birth Certificate or Naturalization Certificate.
This specification is intended to indicate the kinds of tasks and levels of work difficulty that will be required of positions that will be given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of any supervisor to assign, direct, and control the work of employees under his/her supervision. Ability to competently perform all the essential duties of the position, with or without reasonable accommodation, demonstrated commitment to effective customer service delivery, and the ability to work productively as a member of a team or work group are basic requirements of all positions at Fairbanks Morse Defense.
Fairbanks Morse Defense offers a competitive benefits package including but not limited to, medical, dental, vision, life, and disability insurances, and 401k retirement plan with employer match. In addition, we offer paid time off, paid holidays, paid parental leave, and tuition reimbursement.
Equal Opportunity Employer/Veterans/Disabled

CNC MACHINIST III

BENEFITS

• 15% 2nd Shift Premium
• Flex Schedule (4 10s)
• $1,000 90-Day Sign-On Bonus
• Medical & Vision Insurance
• Supplemental Insurance Plans Available
• Dental Insurance (Company paid)
• STD and Life & AD&D Insurance (Company paid)
• 401(K) Matching
• PTO & Unpaid Excused Absences
• Uniforms (Company paid)
• Training & Apprenticeship Opportunities
• Safety Shoe & Glasses Reimbursement Program
• Gym Membership Reimbursement Program

JOB SUMMARY

CNC Machinist III is responsible for operating and programming a 5-axis CNC machine tool. This includes setting up and verifying tooling, setting part offsets, and programming computer-aided manufacturing (CAM) software. With little guidance, this person can complete a complex part from start to finish.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Performs safe operations by adhering to safety procedures and regulations.
• Observes machine operation to detect malfunctions or out-of-tolerance machining conditions.
• Operates and maintains machine according to work instructions.
• Programs toolpaths with CAM software.
• Operates and programs 5-axis CNC machine tool.
• Takes precise measurements to verify program accuracy.
• Monitors and develops speed, feed, depth, and/or angle of cut during machining operations.
• Maintains clean work area and machine daily.
• Maintains workflow between shifts by documenting and communicating actions.

The above list reflects the general details necessary to describe the principle and essential functions of the position. It shall not be construed as the only duties that may be assigned for the position.

An individual in this position must successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position.

MINIMUM QUALIFICATIONS

• 5+ years of experience as a CNC Machinist.
• Previous experience machining various exotic materials and specialty tooling.
• CAM software experience.
• GD&T experience.
• Working knowledge of safety protocols.
• Has strong attention to detail and is self-motivated.
• Strong understanding of mathematics.

PREFERRED QUALIFICATIONS

• High school degree or equivalent.
• Apprenticeship or vocational training.
• Powermill experience.

PHYSICAL AND MENTAL DEMANDS

An employee must meet the physical and mental demands described here to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Stand, walk, push, pull, reach overhead, and bend to the floor.
• Exert 1 to 25 pounds of force 75% of the time.
• Exert 26 to 50 pounds of force 20% of the time.
• Exert 50 plus pounds of force 5% of the time.
• Ability to read machine dial gages, blueprints, precision measuring instruments, and computer screens.
• Read English and understand sketches, routings, safety rules, operating and maintenance instructions, and procedure manuals.
• Communicate effectively with employees.

WORKING ENVIRONMENT

The work environment characteristics described here represent those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Indoor shop-based position.
• Moderate noise levels from operating machines.
• Physical hazards from moving equipment and machine parts.
• Machining fumes, dust, and mist.
• Skin exposed to oils and cutting fluids.

2nd Shift

Compensation details: 35-50 Hourly Wage

PI19189bbf4b44-26289-36080962

BENEFITS

• $1,000 90-Day Sign-On Bonus
• Medical & Vision Insurance
• Supplemental Insurance Plans Available
• Dental Insurance (Company paid)
• STD and Life & AD&D Insurance (Company paid)
• 401(K) Matching
• PTO & Unpaid Excused Absences
• Uniforms (Company paid)
• Training & Apprenticeship Opportunities
• Safety Shoe & Glasses Reimbursement Program
• Gym Membership Reimbursement Program

JOB SUMMARY

CNC Machinist III-Floor Bar operates and programs a floor bar CNC machine tool. This includes setting up and verifying tooling, setting part offsets, and programming computer-aided manufacturing (CAM) software. With little guidance, this person can complete a complex part from start to finish.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Performs safe operations by adhering to safety procedures and regulations.
• Observes machine operation to detect malfunctions or out-of-tolerance machining conditions.
• Operates and maintains machine according to work instructions.
• Takes precise measurements to verify program accuracy.
• Monitors and develops speed, feed, depth, and/or angle of cut during machining operations.
• Maintains clean work area and machine daily.
• Maintains workflow between shifts by documenting and communicating actions.
• Programs toolpaths with CAM software.

The above list reflects the general details describing the position's principles and essential functions. It shall not be construed as the only duties that may be assigned for the position. An individual in this position must successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position.

MINIMUM QUALIFICATIONS

• 5+ years of experience as a CNC Machinist.
• Ability to operate and program 5-axis CNC machine tools.
• Previous experience machining various exotic materials and specialty tooling.
• CAM software experience.
• GD&T experience.
• Working knowledge of safety protocols.
• Has strong attention to detail and is self-motivated.
• Strong understanding of mathematics.
• Possesses leadership skills.

PREFERRED QUALIFICATIONS

• High school degree or equivalent.
• Apprenticeship or vocational training.
• Powermill experience.

PHYSICAL AND MENTAL DEMANDS

To perform the essential functions of this job successfully, an employee must meet the physical and mental demands described here. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.

• Stand, walk, push, pull, reach overhead, and bend to the floor.
• Exert 1 to 25 pounds of force 75% of the time.
• Exert 26 to 50 pounds of force 20% of the time.
• Exert 50 plus pounds of force 5% of the time.
• Ability to read machine dial gages, blueprints, precision measuring instruments, and computer screens.
• Read English and understand sketches, routings, safety rules, operating and maintenance instructions, and procedure manuals.
• Communicate effectively with employees.

WORKING ENVIRONMENT

The work environment characteristics described here represent those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Indoor shop-based position.
• Moderate noise levels from operating machines.
• Physical hazards from moving equipment and machine parts.
• Machining fumes, dust, and mist.
• Skin exposed to oils and cutting fluids.

1st Shift: 5:45 AM - 2:15 PM for 8's

Compensation details: 35-50 Hourly Wage

PIdf21809d2fed-26289-38048829

At Greene, Tweed, you'll find the cutting-edge technology, world-class polymer expertise and endless advancement opportunities you'd expect from a multi-national industry leader. You'll find them all in an environment that embraces diversity in people and opinions, moves decision making to the point of impact, and celebrates your success.
If you enjoy continuous learning and are excited about working with and creating technological solutions, explore career opportunities with Greene, Tweed.
CNC & Tooling Machining Opportunities: Union Positions
Location: Kulpsville, PA
Shifts Available:

• 
  
• 2nd Shift: Typically 2:30 PM-11:00 PM (varies by department)
  
• 3rd Shift: Typically 10:30 PM-7:00 AM (varies by department)
  

CNC Lathe Machinist - 2nd & 3rd Shift

• 
  
• Perform lathe machining from customer/GT drawings with minimal supervision.
  
• Edit and generate machine code; utilize subprograms and edge-break calculations.
  
• Troubleshoot issues, make rapid adjustments, and run multiple lathes concurrently.
  
• Inspect with OGP, Keyence, optical comparator, and other metrology.
  
• Preferred: thermoplastic machining (PBI, PEEK/ARLON, nylon, acetal, UHMWPE, PTFE).
  

CNC Mill Machinist - 2nd Shift

• 
  
• Set up and run CNC machining centers; support semi-auto/manual machines and Prototrak lathes.
  
• Edit programs and run more complex geometries (grooves, notches, deep pockets).
  
• Machine thermoplastics and metals.
  
• Assist with programming, first articles, and metrology.
  
• Rotate across milling equipment as needed.
  
• Contribute updated setup info for CNC programming documentation.
  

Toolmaker - 2nd Shift

• 
  
• Build, repair, and maintain molds, dies, fixtures, gauges, cutting tools, cores/sleeves, and elastomer tooling.
  
• Read G-code and operate CNC, manual, and wire EDM equipment.
  
• Perform precision toolroom work: polishing, refinish, flat grinding, thread repair, aligning/diagnosing interlocks, and ensuring form/fit/function.
  
• Lead 5S activities; mentor Tool Maintenance Machinists.
  
• Provide design feedback to Tool Designers to improve manufacturability.
  

Composites CNC Machinist - 3rd Shift

• 
  
• Set up and run 5-axis CNC machines to produce complex and prototype components.
  
• Perform program downloads, fixture setup, offset adjustments, and program edits at the machine.
  
• Interpret and apply GD&T.
  
• Complete first articles and all dimensional inspection using CMM/OGP and other devices.
  
• Degate, finish, and visually inspect composite parts.
  

Experience Requirements by Role

• 
  
• 
  CNC Lathe Machinist: Minimum 1 year of CNC lathe experience in production (setup, troubleshooting, NC program editing).
  
• 
  CNC Mill Machinist: Minimum 3 years of CNC machining center experience (setup, troubleshooting, NC program knowledge).
  
• 
  Toolmaker: Minimum 2 years of tooling experience
  
• 
  Composites CNC Machinist: Experience with 5-axis CNC machining and GD&T; composite machining preferred.
  

Required Minimum Qualifications

• This position requires U.S. Person status as defined by applicable law for authorized access to data controlled under the International Traffic in Arms Regulations (ITAR). A U.S. Person includes U.S. Citizens, U.S. Nationals, lawful permanent residents, and workers granted refugee or asylum status in the United States.

Note: This Job Description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by the Supervisor. All requirements are subject to change and updates.
We also provide eligible employees with a competitive benefits package that includes health insurance, flexible spending accounts, health savings account, 401k savings plan, life and disability insurance, tuition assistance and more, to meet the diverse needs of all employees and their family members.
Equal Opportunity Employer:
Greene, Tweed is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, physical or mental disability, veteran status, or any other federally protected class.
Drug Free Workplace:
Greene, Tweed is a Drug Free Workplace. Employment is contingent upon successful completion of a pre-employment drug screening and background investigation subject to federal, state, and local laws.
NOTE: Greene, Tweed is not seeking assistance or accepting unsolicited resumes from search firms for employment opportunities, unless they have a written agreement for the position they are contacting us about. Regardless of past practice, all resumes submitted by search firms to any employee at GT without a valid written search agreement in place for that position will be deemed the sole property of Greene, Tweed, and no fee will be paid in the event the candidate is hired by Greene, Tweed as a result of the referral or through other means.

Precision Tool and Die Fabricator
Position: Precision Tool and Die Fabricator
Company: Chicago Metallic
Location: 1502 N Central Avenue About Us
Bundy Baking Solutions is a global family business with a rich legacy rooted in genuine care for everyone connected with the organization. Founded by Russ Bundy 60 years ago, the company started by selling baking pans from the trunk of his car and has since grown into an international leader in baking solutions. Its extensive reach encompasses designing, manufacturing, coating, and distributing high-quality bakery equipment and supplies. Today, Bundy Baking Solutions operates worldwide, employing nearly 2,000 people across 11 countries and multiple business units and manufacturing facilities.
We plan to offer a competitive salary, a great benefits package, a genuine company culture, and the rewarding opportunity to have a significant impact on a global family business. Speaking of culture, be sure to check out the CREED section of our careers page:

Bundy Baking Solutions is the world's leading manufacturer of baking equipment custom and stock baking pans and pan coatings. Built with extensive hands-on knowledge of the baking industry and its operations, Bundy has a legendary reputation for both quality and innovation.

Position SummarySet up and operate machine tools. Fit and assemble parts to make or repair metal stamping dies, applying knowledge of mechanics, shop mathematics, metal properties, and machining procedures. Study specifications, such as blueprints, sketch, or description of part to be made, and plan sequence of operations. Primary Duties and Responsibilities include the following:

• Studies sample parts, blueprints, drawings, and engineering information to determine methods and sequence of operations to fabricate product
• Operates metalworking machine tools, such as lathe, milling machine, drill, or grinder to machine parts to specifications
• Assembles parts into completed units using jigs, fixtures, hand tools, and power tools
• Fabricates, assembles, and modifies tooling, such as jigs, fixtures, templates, and molds or dies to produce parts and assemblies
• Verifies dimensions of parts, using precision measuring and marking instruments and knowledge of trigonometry within .0005
• Calculates and sets controls to regulate machining, or enters commands to retrieve, input, or edit computerized machine control media
• Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials onto machines
• Measures, examines, and tests completed units to detect defects and ensure conformance to specifications
• Dismantles machines, dies, or equipment, using hand tools and power tools, to examine parts for defect or to remove defective parts
• Cleans, lubricates, and maintains machines, tools, and equipment to remove grease, rust, stains, and foreign matter
• Confers with engineering, supervisory, and manufacturing personnel to exchange technical information
• Designs fixtures, tooling, and experimental parts to meet special engineering needs

Qualifications, Knowledge and Abilities:

• Knowledge of various machines such as cutting tools, lathes, milling machine, shaper, grinder
• Knowledge of powered tools
• Ability to read blueprints
• Ability to measure, mark and organize metal stock for machining
• The ability to exert maximum muscle force to lift, push, pull, or carry objects weighing 50 pounds
• The ability to choose quickly and correctly between two or more movements in response to two or more signals (lights, sounds, pictures, etc.). It includes the speed with which the correct response is started with the hand, foot, or other body parts
• The ability to quickly respond (with the hand, finger, or foot) to one signal (sound, light, picture, etc.) when it appears
• The ability to time the adjustments of a movement or equipment control in anticipation of changes in the speed and/or direction of a continuously moving object or scene
• The ability to communicate information and ideas in writing so others will understand
• The ability to remember information such as words, numbers, pictures, and procedures
• The ability to quickly and repeatedly bend, stretch, twist, or reach out with the body, arms, and/or legs

The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. Management maintains the right to assign or reassign duties and responsibilities to this job at any time
#IND123

PIbefd11991366-26289-39921649

Description
Engineering R & D Lab - Tool & Die Machinist 2nd Shift
Easton, PA - Victaulic Global HQ
**WE ARE OFFERING A SIGN ON BONUS UP TO $10,000 ALONG WITH RELOCATION FOR THIS POSITION
Position is a 2nd shift opportunity. 4 day work week Monday-Thursday 2:30pm-12:30am
About Victaulic
Since 1919, Victaulic has been the world's leading producer of grooved mechanical couplings and pipe-joining systems. Used in the most demanding markets, Victaulic's innovative piping technologies and services put people to work faster and maximize efficiency while increasing safety and ensuring reliability. The company has 13 major manufacturing facilities, 29 branches, and over 4,000 employees speaking 43 languages across the globe. With more than 1800 active global patents, Victaulic solutions operate in 125 countries across diverse business lines, including oil and gas, chemical, mining, power generation, water and wastewater treatment, military and marine, as well as commercial building and fire protection.
About the Team
The Engineering Lab is a community of 50 plus individuals that dedicate and pride themselves to the excellence of new product development testing. Our lab uses the latest and state of the art technology such as 3D printing, 3D scanning. We test products from \" to over 100\" in diameter. We work with fire suppression systems that save people's lives, we develop products that provide clean drinking water, and products that bring natural resources out of the ground to help improve every single human's life every day.
Scope:
Working in a Corporate Engineering Research and Development Laboratory with the responsibility of machining and fabricating high-quality components and prototypes to maintain initiative and project timelines for new product or process introductions. This includes ensuring that all dimensional standards and requirements are met during the prototype construction stage. Creative input is required frequently, as prototype specifications are often incomplete during early project development
Responsibilities include but are not limited to:

• 
  
• Set up and operate machine tools including but not limited to the following:
  
• Milling Machines & Machining Centers (manual and CNC controlled)
  
• Engine & Slant Bed Lathes (manual and CNC controlled)
  
• Surface Grinder
  
• Drill Presses
  
• Tool & Cutter Grinders
  
• Cut-off Saw/ Band Saw/ Abrasive Saw
  
• Use all applicable hand tools including: Micrometers (inside/outside), calipers, height gages, depth gages, etc.
  
• Machine prototype components from 3-D model files supplied from Engineering Design.
  
• Using creativity and self-direction in designing, machining, and testing of prototypes and fixtures when standard methods do not apply.
  
• Machine components or prototypes to supplied Engineering blueprints within specified tolerance requirements.
  
• Provide innovative input, as appropriate, to Engineering staff to help meet overall program goals.
  
• Determine all necessary equipment and operating parameters necessary to achieve completion of assignments including; end mills, inserts, drills, reamers, fixturing, cutting speeds, surface finishes, etc.
  
• Design and construct fixtures for aiding in the machining process as necessary.
  
• Perform bench work with hand tools as necessary.
  
• Perform maintenance on machine tools, equipment, and work area to maintain a proper work environment.
  
• Ability to work from written or verbal instructions.
  
• Participate in the Quality Improvement Program through the use of QWG's, MATS's, CATS, and utilization of QIP problem solving techniques.
  
• Perform Technical Lab functions as necessary (hydro testing, inspection, pattern approvals, etc.).
  
• Specific policies and procedures have been established by the Engineering Department to provide for the security and accessibility of electronic data and confidential information. It is the responsibility of the employee, in the daily course of doing business, to follow said policies as they relate to document management (see EOG-26). The extent to which departmental research and development information is stored electronically has vastly increased, and will continue to do so. The new Federal rules pertaining to electronic discovery stipulate that substantive email communications constituted \"records\" under the Federal Records Act. It is therefore the responsibility of each departmental employee to understand their role in communicating via e-mails and that all e-mails must be written/responded to in a professional manner
  
• Follow ALL safety procedures and guidelines.
  

Qualifications:

• 
  
• High school graduate.
  
• Proficient in blueprint reading, assembly drawings, shop math, geometry, and use of precision measuring instruments.
  
• Proficient in bench work including: drilling, tapping, filing, assembly, and inspection of components for form, fit, and function.
  
• Minimum of eight years of machine shop or related experience.
  
• Ability to set up, operate, and maintain all Lab machine tools in a proper and safe operating manner.
  
• The ability to operate or adapt to the use of CNC controlled machine tools including programming, set-up, and proper operating parameters required to safely operate this equipment.
  
• MasterCam experience preferred but not necessary.
  

#LI-JH1 #LI-ONSITE #TOP123
Victaulic Staffing Partner Communication Policy
All staffing agencies are strictly forbidden from directly contacting any Victaulic employees, except those within the Human Resources/Talent Acquisition team. All communications, inquiries and candidate submissions must be routed through Victaulic's Human Resources/Talent Acquisition team. Non-compliance with this policy may result in the suspension of partnership, cancellation of the current contract, and/or the imposition of a mandatory probation period before any future business can resume. Additionally, non-compliance may lead to a permanent ban on future business. This policy ensures a streamlined and compliant recruitment process.
When you join Victaulic, you do not simply advance your career. You become part of a family of talented individuals who are dedicated to innovation and progress.
Victaulic is an equal opportunity employer and encourages individuals from all backgrounds to apply. We thank all applicants for their interest, but only those selected for an interview will be contacted.
Victaulic is committed to providing accommodations for people with disabilities. If you require an accommodation, please let us know when contacted for an interview.

Job Description:
Machinist II
Collaborate with Innovative 3Mers Around the World
Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a wide variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers.
This position provides an opportunity to transition from other private, public, government or military experience to a 3M career.
The Impact You'll Make in this Role
As a(n) Machinist II you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by:

• 
  
• Running various equipment including manual mills, manual lathes, Vertical Machining centers, CNC Lathes, and miscellaneous shop equipment. Set up machine using proper fixture and selecting proper tooling for the application. Machine various materials such as steels, aluminums, composites, plastics, and rubbers.
  
• Writing and editing programs for machine to enable correct tool path, cutting speed and feeds.
  
• Writing and reviewing setup sheet and specifications to determine setup procedure, machining sequence, and dimensions.
  
• Observing and listening to machine operation to detect malfunctions such as worn or damaged cutting tools. Trouble shoot machine alarms, make corrections as needed and conduct routine machine maintenance. Change inserts, cutting tools and location of workpiece during machining process as specified in setup instructions.
  
• Measuring workpieces for conformance to specifications (i.e. material, dimensional tolerance) and adjust machine feed and speed and changes cutters to machine parts according to specifications. Routine machine maintenance and upkeep.}
  

Your Skills and Expertise
To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications:

• Possess a two-year machining degree or certificate (completed and verified prior to start) AND two (2) or more years of machinist experience in a Manufacturing environment

OR

• Possess G&M Code Programming certification (completed and verified prior to start) AND three (3) or more years of machinist experience in a Manufacturing environment

AND

• 
  
• Interested and available to work first shift as well as overtime (during the week and/or weekend) as needed.
  
• Reliably commute or planning to relocate to Red Wing, MN 55066 - before starting work (required)
  

Additional qualifications that could help you succeed even further in this role include:

• 
  
• Fluent in English, both written and verbal
  
• Ability to maintain neat and orderly conditions where you work and promote safe conditions
  

Pay & Benefits:

• 
  The rate of pay for this position is $37.03/hour. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences, and Retirement Benefits, etc.). Additional information is available at: : N/A
  Relocation Assistance: Is not authorized
  Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).
  Supporting Your Well-being
  3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope.
  Chat with Max
  For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on /careers.
  All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M.
  Learn more about 3M's creative solutions to the world's or on Instagram, Facebook, and LinkedIn @3M.
  Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.
  Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement.
  Pay & Benefits Overview: does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law.
  Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.
  3M Global Terms of Use and Privacy Statement
  Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms.
  Please click on the following links and select the country where you are applying for employment to review the applicable Terms of Use (link here) and Privacy Policy (link here). Before submitting your application, you will be asked to confirm your agreement with the terms.