Resco Electronics Llc Jobs in Usa

Position Title: Electron Microscope Operator/Technician II

Work Location: Temecula CA 92591

Assignment Duration: 10 months

Work Arrangement: Onsite

Position Summary:

Provides our organization Vascular R&D and Production Engineering staffs, Legal, Marketing, and external clients with data regarding questions and problems concerning materials, processes, new technology, and methods related to the development, production, and use of products.

This data will be generated utilizing microscopic (electron and optical) and/or elemental analyses. The data will be in the form of images and/or elemental spectra. Official reports will be written, archived, and issued by the analyst. Responsible for compliance with applicable Corporate and Divisional Policies and procedures.

Key Responsibilities:

* Job would require 50-75% SEM laboratory work involving hands-on analysis (non automated program).

* Perform more advanced sample preparation such as inorganic materials or metallurgraphic sample preparation.

* Evaluates written requests to perform materials analysis. Determines if the request can be accomplished with in-house technology or if it has to be assigned to an authorized, outside laboratory.

* Prepares samples for the specific type of analysis required or requested (FEM, SEM, EDS, etc.).

* Performs analysis according to the Departmental Operating Procedure (DOP) for the instruments used in the analysis.

* Analyzes specific characteristics of the material, process, or failure morphology by comparing with known characteristics from which to draw conclusions.

* Creates reports using the Laboratory Information System (LIMS), for all requests. Archives data, images, and analyses.

* Maintains laboratory instrumentation in good working. Arranges for service and repairs from vendor for major problems.

* Creates Departmental Operating Procedures (DOPs), Standard Operating Procedures (SOPs), Software Validations (VRS), Engineering Orders (EOs), and testing protocol in order to assure consistent and proper operation, calibration, and maintenance of the laboratory's instrumentation.

Qualification & Experience:

* Bachelor's degree or 2 years from a microscopy school or materials degree with 6 months to 2 year experience using the electron microscope plus 2-5 years of related work experience with a good understanding of specified functional area, or an equivalent combination of education and work experience.

* Working knowledge and application of business concepts, procedures and practices.

* Report writing, analytical abilities, detailed oriented and cGMP (compliance) awareness.

* Will perform this job in a quality system environment. Failure to adequately perform tasks can result in noncompliance with governmental regulations.

* Works on problems of moderate scope where analysis of situations or data requires a review of identifiable factors.

* Exercises judgment within defined procedures and practices to determine appropriate action.

* Has a general knowledge of technical alternatives and an understanding of their impact on the systems environment.

As a Production Team Supervisor, you’ll lead a group of 8–10 assemblers, working closely with another supervisor and partnering with materials, quality, and engineering teams. Your leadership will help drive scheduling, coaching, problem-solving, and ensuring high standards across assembly, wiring, and finishing operations.

You will:

• Coordinate daily production activities to meet delivery goals
• Coach and develop team members while fostering a culture of quality and accountability
• Jump in where needed to keep operations moving in a fast‑paced environment
• Address and document production or quality issues
• Support continuous improvement and cross‑team collaboration
• Lead with respect, consistency, and hands‑on engagement

What Makes You a Great Fit

Must‑Haves:

• More than 2 years of relevant production, testing, or electronics experience
• Strong communication and people‑leadership skills
• Ability to adapt within a new and growing facility
• Working knowledge of electronics, circuit boards, schematics, and test equipment
• Familiarity with power electronics or troubleshooting down to component level

• Bonus: Annual production-based incentive
• Benefits:401(k)
• Tuition & certification reimbursement
• Comprehensive health benefits

Maxonic maintains a close and long-term relationship with our direct client. In support of their needs, we are looking for a Program Manager High-volume Manufacturing (HVM) in Electronics

Job Description:

Job Title: Program Manager High-volume Manufacturing (HVM) in Electronics

Job Type: Fulltime

Job Location: Cupertino, CA

Work Schedule: Onsite

Salary: 150k to 160k, Based on experience

The Project Manager will manage the relationship with Contract Manufacturers and oversee projects from customer commitment to implementation.

Responsibilities:

• Manage projects from customer commitment to implementation, ensuring on-time, on-budget delivery.
• Define project scope, timelines, and resource needs, and develop project specifications.
• Provide regular status updates to senior management and team members.
• Maintain project tracking documentation and support the development of BOMs for new items.
• Coordinate with R&D, Operations, and Engineering teams to manage product formulas, production capability, and testing.
• Manage change part communications and coordinate trial schedules with Quality and Production teams.

Qualifications:

• 5-10 +years of project management experience.
• Strong communication, problem-solving, and organizational skills.
• Ability to work effectively in cross-functional teams and manage multiple projects simultaneously.
• Worked with Technology CMs like – Foxconn, Pegatron, Wistron, Compal, Quanta, Tata, Inventa, Flextronics or Flex, Jabil, Luxshare, BYD Electronics
• Worked with large global companies and drove the relationship with the CM. Large global companies include – Apple, Microsoft, Sony, Dell, HP, Meta, ASUS, Acer, Cisco, Huawei etc…
• Must be able to work under pressure
• Must be able to travel to China
• Able to speak Mandarin a big plus

About Maxonic:

Since 2002 Maxonic has been at the forefront of connecting candidate strengths to client challenges. Our award winning, dedicated team of recruiting professionals are specialized by technology, are great listeners, and will seek to find a position that meets the long-term career needs of our candidates. We take pride in the over 10,000 candidates that we have placed, and the repeat business that we earn from our satisfied clients.

Interested in Applying?

Please apply with your most current resume. Feel free to contact Jhankar Chanda ( /(4 for more details.

Electronics Supervisor

We are seeking an experienced Electronics Supervisor to lead the electrical operations of a high-volume rod mill. This role is responsible for overseeing the electrical department, troubleshooting complex industrial systems, and ensuring reliable equipment performance to support safe, efficient steel production.

Key Responsibilities

• Supervise the electrical team and oversee day-to-day electrical operations within the rod mill
• Troubleshoot and resolve issues involving PLCs, drives, motors, sensors, and other industrial electrical equipment
• Monitor electrical systems impacting production and product quality while minimizing downtime
• Provide leadership, training, and coaching to electrical technicians and apprentices
• Support safety programs, enforce work rules, and ensure compliance with plant procedures
• Collaborate with maintenance and production leadership to address operational issues and improve reliability

Qualifications

• 5+ years of heavy industrial electrical or electronics experience
• 2+ years of leadership or supervisory experience in an industrial environment
• Strong knowledge of AC/DC systems, motor controls, PLCs, drives, and industrial automation

We are currently partnering with a leading consumer products company to find an exceptional Art Director for a hybrid role based in Irvine, CA.

This is a fantastic opportunity for a creative leader with a strong portfolio in consumer electronics and brand development to influence a dynamic, multi-channel environment. The ideal candidate will oversee the translation of innovative ideas into compelling visual content across physical packaging, retail displays, and digital platforms.

Experience:

• 10+ years of professional design experience within CPG, consumer electronics, or multi-brand environments
• BA/BS in Fine Art, Graphic Design or other related degree
• Experience leading cross-disciplinary creative teams
• Proven experience building and executing integrated brand systems across packaging, retail, ecommerce, and digital marketing
• Deep understanding of packaging production, print processes, structural considerations, retail and regulatory compliance, and global production partnerships, with the ability to anticipate and resolve execution challenges across channels
• Exceptional eye for graphics, typography, composition, layout, color, visual hierarchy, and graphic systems, with the ability to elevate product visuals across photography and photorealistic rendering
• Ability to translate business feedback into clear creative direction and articulate design rationale to cross-functional partners
• Strong commercial understanding of retail, ecommerce, and consumer engagement trends
• Proficiency in Adobe Creative Suite and Figma, with familiarity in visualization tools
• Travel may be required based on project needs

If you feel you have what it takes for this position, we would love to hear from you! Please send your resume to:

For more information about Arrowmac and all of our jobs, please visit

ABOUT THE COMPANY:

Founded in 1927, MATHESON is one of the largest compressed gas providers in the world. MATHESON provides everything from onsite air separation plants to small portable gas cylinders and all the services required to support these products and customer applications. We offer semiconductor, medical, welding, bulk, and cylinder gases for customers across the country. MATHESON has over 300 locations and more than 4500 employees in the U.S.

POSITION SUMMARY:

Representing a core business unit for Matheson, this commercially focused person is responsible for managing Matheson’s point of use and bulk purifier and abatement product line and also will contribute to the sales of these products directly and indirectly by interactions with our existing sales team. New product roll outs, handling customer issues, and working with operations and quality departments to ensure the purifier products get ordered, manufactured, and shipped according to existing processes and standards.

ESSENTIAL ACCOUNTABILITIES:

The Purifier Product Manager Equipment - Electronics will increase sales and market share by developing relationships achieving levels of trust and credibility with the clients’ lab personnel, safety departments and procurement departments. Working directly and supporting Matheson’s Specialty and Packaged Gas sales team the Sales Specialist will drive our specialty gas sales initiatives.

Job Overview:

The Product Manager Equipment - Electronics will be responsible for Sales in support of overall sales internally at Matheson facilities and externally with customer visits.

Primary Responsibilities:

• Understand and adhere to company safety work policies and operating practices: report safety incidents and near misses.
• Increase sales and market share of point of use and bulk gas purifiers through direct and indirect sales activities.
• Develop sales leads into profitable accounts working closely with local sales teams within defined regions
• Serve as a conduit for information between clients and our senior management, operations and quality assurance departments
• Provide management with regular reporting and updates regarding key customer, prospects and projects
• Conduct sales for the Nanochem Purification Business Group and bulk gas purifiers directly to customers.
• Identify and assist in managing quotes and customer follow-up with Customer Service and Internal Sales persons.
• Assist in managing contracts for outside sales.
• Follow up with monthly reports of sales and targets.
• Answer technical and non-technical questions from customers to assist in the correct product offering.
• Train existing sales people from Specialty gas and Packaged gas department and assist in external sales to customers.
• Work with teams to establish and maintain operating and maintenance procedures and preventative maintenance schedules for purification systems.

· This position requires a combination of office work and fieldwork after work hours may be expected with International Customers.

· Excellent communication and interpersonal skills are needed to develop working relationships with the management team.

· Travel will be required for this role. Expect 30-50% travel.

Qualifications:

• Bachelor's Degree in a technical discipline (Chemistry or Engineering preferred), or equivalent experience
• Excellent organizational skills are required
• Ability to write and interpret technical procedures and instructions
• Ability to work on multiple projects during a given time frame
• Industrial Gas Purification experience is preferred
• Experience in Bulk gas and Heater Getter purification is preferred
• Experience ultra-high purity gas purification systems is preferred
• Basic analytical and instrumental aptitude is desired
• Ability to travel within the U.S. and provide after-business-hours support as needed

Additional Skill Requirements:

• Candidate must be a highly organized self-starter capable of working independently. Must have excellent communication skills (both orally and written), with an ability to deal with multiple levels of the internal organization, suppliers, and customers. An integral role for the candidate is to be able to work across organizational lines to accomplish their goals.
• Carrying a cell phone and availability to plant personnel for off-hours assistance is required.

Technical Knowledge:

· Must of in depth knowledge about purifiers, purifier materials, specialty gas, specialty gas equipment, bulk, medical and industrial cylinder industry

· Manufacturing of specialty gases including pure gases, gas blends, hydrocarbon blends and reactive gas blends, industrial cylinder gases and bulk atmospheric gases.

· Computer skills including Microsoft Word, Microsoft Excel, Microsoft Visio, Microsoft PowerPoint and Microsoft Outlook

Training, Education and Experience:

· Bachelors of Science Degree in life sciences or chemistry ideally supported by an MBA or commercial experience within the strategic market

· 3-5 years’ experience in sales or marketing within the life science, bio-science, pharmaceutical, chemical, semiconductor or similar technical sales position selling hazardous materials, chemicals, equipment, process control devices or process analyzers. A working knowledge or experience from selling specialty, medical and industrial gases is preferred

· Working knowledge of ISO, Six Sigma and lean manufacturing practices

Job Scope/Metrics:

· Principal Duties and Responsibilities (below):

Primary Duties and Responsibilities

1. Safety Compliance thru Matheson Learning Management System, training, awareness, coordination with SHE Department, Sales and Operations Teams – support company safety programs through exemplary leadership.

10%

2. Direct Sales and sales support to existing gas sales people. Provide active engagement of prospects, sales teams, and customers with the end goal of new business sales and profit growth. Accelerate sales activities to profitably grow Matheson businesses along with executing the company business plans.

60%

3. Retain existing business with timely responses to technical questions, quotes and any issues or complaints.

15%

4. Training of local sales teams, customers and individual skills development

15%

The Company is an Equal Opportunity Employer that complies with the laws and regulations set forth under EEOC. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. EOE AA M/F/VET/Disability

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon , the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Mechanical Engineering group in the Shipboard Effectors Department seeking an experienced Mechanical Engineer REA (Responsible Engineering Authority) to contribute to the mechanical technical team for a common Guidance Unit (Stack). This role is primarily responsible for maintaining mechanical Technical Data Package (TDP) configuration changes, driving producibility updates, supporting failure investigations, supporting alternate component and material evaluations and testing, providing support across the full spectrum of mechanical, environmental, structural, and thermal engineering disciplines. Additionally, the mechanical engineer will be part of a small team of mechanical engineers, ensuring successful support of both production and development efforts.

This is an onsite role and located in Tucson, Az.

What You Will Do

• Serve as the mechanical engineer to support documentation, mechanical, environmental, structural, and thermal aspects of different stack configurations. 

• Contribute to a small team of mechanical production REAs supporting mechanical production and development efforts, ensuring technical excellence and alignment with program objectives. 

• Oversee and manage all mechanical, slice and stack TDP configuration changes, ensuring updates address producibility improvements, yield optimization, and design enhancements. 

• Lead efforts to analyze and incorporate producibility updates into designs to improve manufacturing efficiency and reduce production defects. 

• Support failure investigations, conducting root cause analyses and implementing corrective actions to resolve systemic mechanical issues. 

• Provide technical guidance on mechanical design, analysis, and integration challenges, ensuring compliance with program requirements and performance specifications. 

• Drive design for manufacturability (DFM) practices and lead efforts to identify and implement cost-saving opportunities in mechanical assemblies. 

• Collaborate with cross-functional teams, including systems engineering, quality, and supply chain, to resolve mechanical engineering challenges and ensure seamless integration of stack configurations. 

• Provide oversight and review of hardware performance during environmental testing, including structural and thermal analysis, to ensure compliance with design requirements. 

• Maintain and update mechanical TDPs, processing engineering change requests such as IRs, CNs, SRs, and variances to ensure accurate and current documentation. 

• Positive attitude toward being mentored by experienced technical team members and subject matter experts within Raytheon. 

Qualifications You Must Have:

• Typically requires a Bachelors Degree in Science, Technology, Engineering, and Mathematics (STEM) and a minimum of 5 years of prior relevant experience or an advanced degree in a related field and minimum 3 years experience. ​

• Five years’ experience in mechanical design and design documentation

• Experience with 3D CAD tools (modeling and drawing)

• Experience with Geometric Dimensioning & Tolerancing (GD&T) per ANSI Y14.5

• Experience with the packaging of electronics assemblies

• Knowledge of environmental testing and hardware performance validation, including structural and thermal analysis. 

• The ability to obtain and maintain a US security clearance. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Strong interpersonal and communication skills; both verbal and written

• Experience in mechanical sub-systems packaging, materials, interconnects, or large assembly development

• Experience with managing engineering change processes, including IRs, CNs, SRs, and variances. 

• Proficient in Creo (modeling and drawing) and Windchill (PDM)

• Strong understanding of design for manufacturability (DFM) and design for producibility (DFP) principles. 

• Active DoD issued security clearance

• Experience working in the aerospace and defense industry.

• Advanced degree in Engineering discipline

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

• Please consider the following role type definition as you apply for this role.

• Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

• 
  
• Interprets purchase orders, work instructions, engineering drawings, specifications, and standards to ensure accurate inspection
  
  
• Performs inspections of materials, components, and finished products using standard measuring equipment at various stages of the production process
  
  
• Provide detailed in-process inspections on components, using detailed drawings, CAD models, and established processes to verify conformance to design requirements.
  
  
• Routinely observe technical operations and offer guidance and/or serve as an additional technical resource
  
  
• Uses calibrated measuring equipment (e.g., micrometers, microscopes, calipers, height gauges) to verify part conformity to specifications
  
  
• Created and reviews First Article Inspection Reports (FAIR) IAW AS9102
  
  
• Identify, document, and resolve production and test anomalies in accordance with specifications, procedures and drive corrective action as required
  
  
• Complete inspection reports and MES/SAP transactions
  
  
• Ensure inspection devices are properly calibrated and maintained
  
  
• Validate compliance to inspection protocols and quality procedures
  
  
• Provides 2nd shift quality turnover status reports
  
  

• 
  
• Generate Non-Conformance reports in SAP for discrepancies found during operations with accurate defect descriptions
  
  
• Work with, Engineers, and other personnel to assist in CAPA/RCCA to increase product improvement and lower QMS defects
  
  
• Support 2nd shift team members drive customer satisfaction through ensuring the consistent and repeatable on-time delivery of conforming finished goods per customer requirements
  
  
• Communicate and help resolve non-conforming quality related issues to the 2nd shift team
  
  
• Process non-conforming products and assist engineering in root cause analysis and corrective action
  
  

• 
  
• High School Diploma or equivalent and a minimum of 5 years of prior relevant experience within Aerospace and Defense
  
  
• Experience performing visual inspection on different commodities including CCA's, PCB's, machined parts, Cables/Harnesses, electronic assemblies and component parts.
  
  
• Experience with electronic assemblies and interconnect systems
  
  
• Experience reading and interpreting engineering design drawings
  
  
• Experience performing detailed dimensional inspections using precision measuring tools
  
  
• Experience in using calibrated precision measurement tools
  
  
• Experience in working in an AS9100 quality system
  
  
• Experience in inspecting crimping, solder, conformal coating, staking and surface mount components
  
  

• 
  
• 
  IPC-A-610H
  
  
• 
  J-STD-001
  
  
• 
  IPC-WHMA-A 620D
  
  
• 
  IPC-A-600K
  
  
• 
  AS9102 training/certification
  
  
• 
  ESD Training and awareness
  
  

• 
  
• Experience with and understanding of AS9100/ISO9001 QMS requirements
  
  
• Proficient in SAP 4 Hana or ECC, and Microsoft products.
  
  
• Able to lift 30 lbs
  
  
• Technical experience/education is desired
  
  
• 
  
  

As a Delivery Driver, you'll drive a vehicle, delivering around 300-375 Amazon packages per day. You will be a delivery hero in the neighborhoods you serve - delivering hundreds of smiles to customers every day in the form of critical supplies, household goods, toys and so much more. You can expect to work 4-5 days per week (one day on Saturday or Sunday required) and 10 hours each day.

Come be a part of our A-MAZE-ING Team:

• Earn more: competitive compensation. New delivery drivers start at over $21.00 per hour (with bonuses). Good delivery drivers earn $22-27 per hour (with bonuses). Overtime available for strong drivers.
• Quarterly Bonus - $500 bonus payable after each quarter for drivers with good attendance.
• Daily bonuses.
• Daily Pay available - be sure to ask about it!
• Compelling Benefits: paid time off, insurance, 401k plans + employer matching, AND up to $5,000 per year tuition reimbursement for all full-time employees
• Flexible Schedule. Pick your workdays each week - 3, 4, 5 days
• Independence: spend the majority of your day on the road delivering smiles to customers
• Stay active: you'll be on the move during your shift as you deliver packages from the delivery vehicle to the customer's doorstep
• Professional growth: we offer career growth opportunities such as moving into Lead Driver, Dispatcher, or Operations Manager roles, and professional development and training
• Team environment: a fun, fast-paced, and supportive company culture
• Normal Workloads: You are expected to complete your route, not other people's routes too.

Job Types: Full-time, Part-time, Temporary

Pay: $20.75 - $31.00 per hour

Expected hours: 20 50 per week

Benefits:

• 401(k)
• 401(k) matching
• Company car
• Company truck
• Dental insurance
• Flexible schedule
• Health insurance
• Paid time off
• Paid training
• Referral program
• Tuition reimbursement
• Vision insurance

Shift:

• 10 hour shift
• Day shift
• Morning shift

Work Days:

• Every weekend
• Monday to Friday

Shift availability:

• Day Shift (Required)

Work Location: In person

Company Description: Are you interested in a new opportunity where you can work independently, make a difference in your community, and delight hundreds of customers every day? Apply to be an Delivery Driver today. We offer competitive compensation, benefits, a great company culture, and opportunities for growth. No delivery experience required.

Qualifications:

• Must be at least 21 years old
• Must have a valid driver's license within the state of employment
• Must be able to move boxes up to 50 lbs., with or without reasonable accommodation
• Must have a positive attitude

Additional Information: All your information will be kept confidential according to EEO guidelines.