Resco Electronics Jobs in Usa

Summary:

HCLTech is looking for a highly talented, self-motivated and Experienced PLC Engineer to join it in advancing the technological world through innovation and creativity.

Job Title: Electrical PLC Engineer

Job ID: 1543025BR

Position Type: Fulltime

Location: Milpitas, CA

Key Skills & Experiences required :

• Experience in control systems and Safety interlock circuits.
• Expert in Siemens PLC program development
• Hands on experience in component selection (Cables, wire, connectors and harnesses accessories)
• Experience in Power budget and load calculation and Electrical component selection
• Semi experience in Harnesses design for PDU, Racks, Process equipment's
• Hands on experience in electrical schematic design and system level interconnect diagram design
• Knowledge on the thermal test and power measurement
• Material procurement and Design Validation
• Capable to understand the high-level system requirement and providing workable solution
• Good knowledge in compliance NFPA, CE, SEMI S2, S8
• Knowledge of Clean room and SEMI standards is an added advantage.
• Aspire to own complete product cable harness, PDU design ownership and installation

Education & Experience

• Bachelor's degree in electrical, Electronics, Mechatronics, or related field.
• Minimum 5+ years of relevant experience in Electrical Engineering

Pay and Benefits

Pay Range Minimum: $68000 per year

Pay Range Maximum: $110000 per year

HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to for investigation.

Compensation and Benefits

A candidate's pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year.

How You'll Grow

At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

Company Description

Ready to Drive the Future?

As part of the global Bertrandt Group, our team of innovators tackles cutting-edge projects across ADAS, Autonomous Driving, Electric Mobility, and Manufacturing Support, transforming complex issues into sustainable, connected solutions.

With the strength of a global network of over 14,500 colleagues in 50+ locations, Bertrandt US combines deep expertise in Electronics, Product Engineering, Physical, and Production & After Sales. Join us in engineering tomorrow's mobility today.

General Benefits:

• Complete and comprehensive benefits package including Med/Dent/Vision
• Employer paid STD/LTD/Life
• 401k Retirement program
• Generous paid vacation/sick/holidays
• Creativity encouraged in a fun, friendly work environment

Compensation:

• Salary range $85k - $90k, depending upon experience

Position Overview

We are seeking an experienced Electrical Engineer Mule Vehicle Triage (E/E) to support our OEM customer in Novi, MI with troubleshooting, diagnostics, and issue resolution on Mule and early prototype vehicles.

This role is and requires strong hands-on experience with in-vehicle networks, data logging, and triage processes.

The ideal candidate is highly skilled in vehicle communication networks, the use of Vector tools, and data logging systems, and is able to work independently onsite with the customer.

Key Responsibilities

Onsite Mule Vehicle Triage & Issue Resolution

• Perform structured troubleshooting of electrical and electronic issues
• Isolate and analyze faults in vehicle EE systems
• Support quick restoration of vehicle functionality

Vehicle Network Analysis & Diagnostics

• Work with CAN, LIN, FlexRay, and Automotive Ethernet (incl. DoIP)
• Perform communication checks, trace analysis, and bus monitoring

Data Logging & Configuration

• Set up, configure, and operate various data loggers
• Validate logger configuration and evaluate recorded data
• Provide initial analysis and recommendations

Vector Tools & Hardware Operation

• Use CANoe, CANalyzer, and other Vector toolchain applications
• Operate Vector hardware modules (VN, VT, VX series)
• Run restbus simulations, trace evaluations, and diagnostics

General EE Technical Support

• Support flashing, coding, and update procedures (basic knowledge)
• Perform troubleshooting related to power supply, network communication, and diagnostics

Customer Interaction & Reporting

• Work closely with the Engineering Fleet Manager
• Communicate issues, findings, and technical assessments clearly
• Document triage steps, logs, and root-cause indications

Required Skills, Experience and Education

Strong understanding of Zonal EE Architectures

• Deep knowledge of vehicle communication protocols:
• CAN
• LIN
• FlexRay
• Automotive Ethernet (DoIP)

Hands-on experience with:

• Vector hardware & tooling (CANoe, CANalyzer)
• Data loggers including configuration
• EE troubleshooting and general vehicle diagnostic workflows

• Bachelor's degree in Electrical Engineering
• 2 –5 years of related work experience
• Ability to manage triage steps independently (vehicle level)
• Fluent in English (technical communication)
• German language skills are a plus, but not required
• Strong analytical and problem-solving mindset
• Hands-on, practical approach
• Ability to work independently onsite with the customer
• Clear and structured communication
• High resilience under time pressure

EEO-Statement:

Bertrandt US is committed to fostering an inclusive and diverse workplace. We provide equal employment opportunities to all employees and applicants and strictly prohibit discrimination or harassment of any kind. We consider all qualified candidates without regard to race, color, religion, age, sex, national origin, disability, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by applicable federal, state, or local laws.

Our client, Japanese Electronics manufacturing company, is seeking a Data Analyst in the Schaumburg area with 2+ years of experience.

Title: Data Analyst

Location: Schaumburg IL (Hybrid 3 days on site)

Type: Full Time Direct Hire

Salary: 55-60K

Key Responsibilities

• Develop and analyze eight-month sales forecasts; perform variance and gap analysis against actuals and plans.
• Monitor daily sales/order performance and deliver regular status and management reports.
• Identify data discrepancies and partner with sales to resolve issues and improve accuracy.
• Support short- and long-term sales planning through data-driven insights and risk analysis.
• Manage ERP (SAP/OASIS) master data and provide system support, enhancements, and user training.
• Support audit requirements and conduct market research and ad hoc analysis as needed.

Qualifications

• Strong verbal and written communication skills.
• Japanese language skill preferred.
• Professional collaborator with ability to support senior management.
• Detail-oriented and able to manage multiple deadlines with accuracy.
• Proficient in Excel, Power BI, Outlook, Word, PowerPoint, and SharePoint; skilled in database mining and large data analysis.
• Bachelor’s degree (or equivalent) with 2+ years of relevant experience.

**Please submit your application with a 1-2 page resume. Only qualified applicants will be contacted**

The Manufacturing Supervisor is responsible for supervising daily manufacturing operations and production personnel to ensure production goals are met safely, efficiently, and in accordance with quality standards. This role leads and coordinates training and cross-training initiatives to build workforce flexibility, capability, and coverage. The Manufacturing Supervisor provides direct supervision to production staff, supports continuous improvement initiatives, and ensures consistent execution of production plans, policies, procedures, and standard work.

Supervisory Responsibilities

• Promote a positive, accountable, and team-oriented work environment
• Provide mentorship, development, coaching, and appropriate feedback for team member career pathing and growth
• Support and coordinate staffing needs including cross-training and skills development
• Directly supervise production personnel, managing their production schedules and standard work execution daily
• Conduct performance evaluations
• Ensure company policies and procedures are followed; assist with corrective action and disciplinary processes in accordance with company policy as needed

Essential Duties and Responsibilities

Leadership & Communication

• Develop and grow team member skills, aligned to support our operations roadmap
• Act as a liaison between the Manufacturing Manager and the production team members to ensure clear communication and alignment
• Communicate production performance, risks, and issues to management in a timely manner
• Support training initiatives, standard work development, and skills progression for the team
• Assist department and company leadership with special projects and assignments as needed

Safety & Quality

• Enforce safety standards and safe work practices; lead by example in maintaining a strong safety culture
• Ensure production processes comply with quality standards, work instructions, and regulatory requirements
• Support investigations of quality issues, implement corrective actions, and verify effectiveness
• Conduct floor audits, inspections, and compliance checks as required

Continuous Improvement

• Identify and drive opportunities for process improvement, waste reduction, and efficiency gains
• Lead and support continuous improvement initiatives (Lean, Kaizen, standard work)
• Ensure improvements are documented, trained, and sustained on the production floor

Production & Operations

• Supervise daily production activities to ensure schedules and targets are met
• Assign labor, balance workloads, and address production constraints
• Serve as the primary escalation point for production, quality, safety, and equipment issues on the floor
• Partner with the Manufacturing Manager and supply chain roles to execute production schedules and adjust priorities as needed
• Monitor equipment performance and coordinate to minimize downtime

Requirements

Qualifications, Knowledge, Skills & Abilities

Required

• Bachelor’s degree in Operations Management, Engineering, Industrial Management, or related field OR equivalent leadership experience in manufacturing
• Minimum of three (3) years of leadership experience in a manufacturing environment (Lead, Supervisor, or equivalent)
• Strong working knowledge of manufacturing processes, safety standards, and quality systems
• Demonstrated ability to supervise and develop team
• Strong communication, organizational, and problem-solving skills
• Proficient with Microsoft Office Suite

Preferred

• Electronics manufacturing experience
• Experience supporting or leading continuous improvement initiatives
• Experience working with an ERP system

Job Description

Sanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutions provider serving the fastest-growing segments of the global Electronics Manufacturing Services (EMS) market. Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. Sanmina Corporation has facilities strategically located in key regions throughout the world.

The Sanmina Fremont facility is a full-service enclosure systems solution manufacturing plant. Located in California’s Silicon Valley, this facility produces low-to-mid volume New Product Introduction (NPI) runs to full-scale volume. The Fremont facility offers everything from small piece parts to fully integrated and tested systems. In addition, this location offers in-house painting capabilities and flexible logistics solutions in distribution, inventory management and hubbing, as well as repair services.

Job Purpose- The Production Manager is responsible for the direct management of all manufacturing and production activities for complex fabricated sheet metal, tubular frames, final assembly & test of a variety technical components & products. This role focuses on optimizing shop floor processes, ensuring product quality, meeting production schedules, and maintaining a safe working environment, directly supporting the strategic goals set by the Plant Manager.

Key Responsibilities

Production & Efficiency Management

• Oversee the daily execution of production schedules across multiple departments (e.g., sheet metal fabrication, welding, powder coat painting, final assembly, testing) to ensure on-time delivery (OTD) targets are met.
• Drive the implementation and application of Lean Manufacturing principles and Continuous Improvement initiatives (e.g., 5S, Standard Work, Waste Reduction) to enhance operational efficiency and reduce manufacturing cycle time.
• Monitor key operational metrics, including Overall Equipment Effectiveness (OEE), scrap rate, and labor utilization, taking corrective action as necessary.
• Coordinate with the Engineering department to manage the introduction of new products (NPI) smoothly into production and resolve complex manufacturing issues.

Quality and Safety

• Champion a rigorous Safety (HSE) program on the shop floor, ensuring all employees adhere to strict safety protocols and environmental compliance standards.
• Work closely with the Quality team to maintain high product quality, ensure compliance with the ISO 9001 standard, and manage in-process quality control gates.
• Lead and support teams in performing Root Cause Analysis (RCA) for production defects and implementing sustainable corrective and preventive actions (CAPA).

Team and Resource Management

• Directly supervise Production Supervisors, leading, mentoring, and developing the manufacturing workforce.
• Manage labor planning, scheduling, and capacity requirements to match demand fluctuations.
• Collaborate with Materials Planning, Purchasing and Logistics teams to optimize inventory levels and ensure the timely flow of components to the production line.

Qualifications

Education: Bachelor's degree in Industrial Engineering, Manufacturing Engineering, Operations Management, or a related technical field.

Experience: Minimum of 7+ years of experience in a manufacturing environment, with at least 3 years in a management or senior supervisory role overseeing production operations.

Industry Knowledge: Hands-on experience in the heavy electrical equipment or similar industrial manufacturing sector is highly preferred as is familiarity with processes for MV products (e.g. electrical assembly, insulation processes).

Technical Skills:

• Proven expertise in Lean Manufacturing and Continuous Improvement methodologies.
• Strong working knowledge of manufacturing ERP/MRP systems and production scheduling tools.

Leadership: Exceptional problem-solving skills, decisiveness, and proven ability to manage and motivate a large, diverse manufacturing workforce in a fast-paced environment.

This is an ITAR facility and applicant must be a US Citizen or a lawful permanent resident.

Sanmina is an Equal Opportunity Employer – M/F/Veteran/Disability/Sexual Orientation/Gender Identity

Job description:

Overview

The Engineer/Programmer is responsible for preparing and validating PCB fabrication and assembly data packages while also programming and supporting production equipment across Adura’s SMT, inspection, and electrical test platforms.

This role bridges design-to-manufacturing execution by converting customer data into production-ready CAM outputs and machine programs for SMT lines, AOI, X-ray, and Flying Probe systems. The position plays a critical role in enabling high-reliability thermal PCB-A production for Automotive, Medical, Defense, and Aerospace markets.

Key Responsibilities

CAM & DFM Responsibilities

• Review customer Gerber, ODB++, IPC-2581, and CAD data for manufacturability
• Create panel layouts optimized for yield, SMT flow, and thermal PCB constraints
• Define stack-ups, copper weights, materials, impedance requirements
• Perform DFM analysis for heavy copper, metal-core, and high-power designs
• Generate fabrication drawings, drill files, and production documentation
• Manage revision control and maintain accurate data records
• Support quoting with panel yield calculations and fabrication cost drivers

Machine Programming & Production Support

• Program SMT pick-and-place machines (component libraries, feeder setup, placement files)
• Generate and optimize solder paste printer programs (alignment, offsets, stencil parameters)
• Program 3D SPI inspection parameters and board models
• Develop AOI inspection programs and tuning criteria
• Support X-ray inspection programming for void analysis and BTC/QFN inspection
• Create and validate Flying Probe test programs for electrical verification
• Assist in NPI builds by debugging programs and optimizing cycle time
• Maintain component libraries and machine databases
• Collaborate with Process Engineering to optimize placement strategy and throughput

Requirements

• 3+ years experience in PCB CAM and SMT manufacturing environments
• Proficiency with CAM350, Genesis, or equivalent CAM software
• Hands-on experience programming SMT equipment (printer, pick-and-place, AOI)
• Familiarity with X-ray and Flying Probe programming environments preferred
• Strong understanding of PCB stack-ups, thermal materials, heavy copper routing
• Experience with high-mix / low-to-medium volume production environments
• Strong documentation and attention to detail
• Ability to troubleshoot machine programs and support production ramp-up

Ideal Candidate Profile

• Comfortable moving between CAD data and production floor
• Strong problem-solving mindset
• Detail-oriented but production-focused
• Understands impact of programming decisions on yield and cycle time
• Familiar with IPC Class 2/3 environments

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Experience:

• SMT Programming: 2 years (Required)
• CAM programming: 1 year (Required)
• electronics manufacturing: 1 year (Required)

Work Location: In person

Why join AVIRE?

Do you have an entrepreneurial mindset? Do you like being part of high growth, high impact environments? Are you looking for an opportunity to lead a world class team intent on providing an unrivalled customer experience? If you have answered yes to these questions, we should connect!

The Avire Sussex, WI team is looking for a highly driven, highly motivated individual to take us to new heights. In this role, you will be responsible for planning, coordinating, and deploying the resources necessary to ensure our manufacturing capabilities grow with the organization focusing on continuous improvement--ensuring that our team is supported to effectively build high-quality products for our customers. Our assembly team is critical to our success as an organization as we produce high quality products that surpass customer expectations. You will be a part of a team of dedicated Production, Shipping and Receiving personnel, Supply Chain professionals, Technical Support Specialists, and Operations experts with the collective goal of supplying high quality products with a best-in-class lead-time exceeding our customer’s highest expectations. Further, you will be a part of a team that has a track record of delivering double digit compound growth while supporting each other. This position reports to the Operations Manager.

What you will do:

1. Sets clear, attainable production-level and cell-level production targets and direct the team to meet these objectives.
2. Manage daily production activities for the assembly cells including scheduling, production quality, material shortages and nonconformance reporting.
3. Manage the production employees, including performance management, health and safety, and individual training & development.
4. Work cross-functionally to ensure effective production processes and align resources to meet both customer & business demands.
5. Work directly with product management to ensure sustainable production for critical products while providing guidance to drive design for manufacturing/design for automation improvements. Facilitates new product integration and manages related engineering changes.
6. Build a culture of continuous improvement to ensure effective labor and materials management are engrained in everyday activities. Support continuous improvement initiatives and implement and evaluate outcomes.
7. Work directly with operational leadership to manage production requirements in alignment with business objectives & strategies and prepare monthly production reports.
8. Maintain production standards to ensure accurate labor reporting and costing.
9. Ensure compliance with local standards and maintains a safe working environment.
10. Perform other duties as assigned.

We want someone who displays:

Action-Oriented Curiosity: You readily take on challenges, and you identify and seize new opportunities. You have an outstanding history of delivering on your projects. You work on the problems that truly need solving, and you effectively challenge the organization to be better. You can cut through the clutter and focus on the priorities that align with organizational objectives.

Collaboration: You embrace the unique experiences, viewpoints, and abilities of your teammates and proactively engage those differences to come to the best possible outcome.

Empowerment: You thrive in an environment where you can make decisions. You do not shy away from taking a stand, and you recognize the importance of challenging the team to ensure that we strive for more. You take responsibility to solve customer problems the first time.

Accountability: You take responsibility for your actions, and you deliver on your commitments.

Inclusion: In all aspects of your work, you treat everyone with respect.

Performance Objectives

1. Cells are functioning effectively and team members are deployed in alignment with the needs of the business.
2. Lean principles are implemented and driven throughout the organization.
3. Performance management, including training & development, is process-driven and implemented consistently throughout the manufacturing team.
4. Plan production schedule and allocate resources to drive efficient, timely output, targeting improved productivity.

Job Skills

• Strong interpersonal and communication skills
• Proven problem-solving proficiency
• Proven ability to lead hourly employees in a manufacturing environment
• Experience in electronics manufacturing a plus
• Experience with KPI metric management and deployment
• Excellent written, verbal, and interpersonal skills to work effectively with diverse groups of people both within, and outside, of the organization.

Qualifications

• Bachelor’s degree in engineering, engineering management, supply chain or a related field
• A minimum of 5 years’ experience in a production environment holding positions of progressive responsibility
• Alternative combinations of education and experience will be considered
• A minimum of 3 years’ experience in a direct management position
• Strong interpersonal and communication skills at all organizational levels
• Strong decision-making skills and results-driven approach
• Proven analytical ability and familiarity with a KPI-driven operations environment
• Proficiency in Lean Principles a plus: Problem Solving, 5S, Flow, Standard Work, Kanban

Who is AVIRE?

Connecting and Protecting People. AVIRE combines 4 market-leading brands (Rath, Janus, Microkey, and Memco) within the elevator and emergency communications industries; currently offering light curtains, area of refuge, emergency telephones / GSMs, and life safety solutions. Each brand has a strong market presence, a unique identity, a distinct product range, and a long, successful history. The group has manufacturing locations in 2 countries, R&D in 2 countries and Sales & Marketing in 8 countries employing over 400 people globally.

AVIRE is part of the Halma group ( ). Halma bets on talent! We are looking for bright, ambitious people to join our team and stay for the long term. With over 50 businesses under its ownership, Halma is a great place to start, advance, or accelerate your career.

Benefits

• Competitive salary
• Organizational bonus plan
• Complete benefits package including health, dental & vision insurance, 401K, paid vacation, paid holidays, and generous parental leave
• Professional development training opportunities
• Company events (i.e. bbq’s, lunches, bowling and much more)!
• 4 x 10 hour schedule Monday – Thursday

Must Haves:

• 3+ years in Quality Assurance in manufacturing/production/assembly
• Experience working in automotive, semiconductor, electronics, or highly automated environments
• 2+ years in a supervisor role
• Experience working with Lean Manufacturing/JIT, Six Sigma methodologies and Total Quality fundamentals

Plusses:

• Certifications (UL1703, IEC 61215, IEC61730-1, IEC61730- 2, Green Belt, etc)
• Experience with solar modules

Job Description:

The Quality Supervisor is responsible for overseeing and ensuring the implementation of quality control measures and standards within the organization. You will play a crucial role in maintaining and improving the quality of products, processes, and services. Your attention to detail, analytical skills, and leadership abilities will contribute to the overall success of the company's quality management efforts.

Responsibilities:

• Manage daily performance of QC staff
• Responsible for leading, motivating, and training QC personnel to meet or exceed department and company goals and objectives
• Lead or assist in Quality department projects as assigned by Management and assist Engineering and Manufacturing with projects, as appropriate
• Investigate root cause of customer complaints and initiate/complete corrective action, as appropriate
• Propose, promote and champion actions to improve quality, processes and product
• Eliminate process variation and product defects through creative solutions
• Maintain ISO based quality systems
• Implement and manage systems to complete statistical analyses and control of all products including raw materials, WIP materials, non-conforming products, and finished goods
• Ensure customer requirements are met
• Devise ways to reduce waste and increase efficiency
• Actively drive Lean Manufacturing initiatives using all available tools and technologies
• Maintain professional and technical knowledge by attending educational workshops, reviewing professional publications, establishing personal networks, and participating in professional societies
• Participate in internal and external audits
• Develop and present KPI reports

Job Title: Field Sales Representative

Status: Salary ($55-65K Base Salary, Commissions are 1% of paid sales for new employees, graduates to higher rates after 1st year. Paid monthly)

FLSA: Exempt

Full/Part time: Full time

Reports to: Area Manager/Branch Manager

Position Summary:

The responsibility of the Field Sales Representative is working through the entire sales process, including generating leads, educating customers, and turning those interested in long-term customers. Develop and maintain customer sales revenues and supplier relationships within an assigned geographical area.

Position Requirement:

• Must have a minimum of High School education/GED; college degree is preferred.

• Must be able to travel

• A valid driver’s license

• Possess and maintain a valid auto liability insurance

Qualifications and Skills:

• Strong organizational, analytical, and communication skills.

• Ability to set goals and sales targets to increase revenue.

• Ability to multitask and manage multiple projects at once.

• Proficient in Microsoft Office suite programs.

Experience Required:

• Minimum of 1 year experience in the electronics industry, sales, sales management, or relevant business experience.

Duties/Responsibilities:

• Duties include developing and maintaining customer, suppliers and manufacturer’s representative relationships.

• Create and present product solutions to customers.

• Drive design registrations. Actively participate and develop value to our suppliers and customers, through active participation in trainings, and business reviews.

• Proactively sell which includes cold calling as well as other proven methods.

• Responsible for identifying new business and grow existing business.

• Perform other duties as assigned.

Physical Demands:

This position is mostly sedentary 7.5 hours a day. Work is done in an office environment and requires ability to type for periods of time. There is occasional lifting of boxes up to 20 pounds. Most work is done using phone, computer or traveling to customer locations

Job Title: Operations & Quality Lead Engineer

Location: Dublin, GA

Hire Type: Contract

Pay Range: $90000 - $110000

Work Model: Onsite

Recruiter Contact: Samantha Marranca | 716-256-1271 |

Nature & Scope:

Positional Overview

The Operations & Quality Lead Engineer will serve as the on-site technical leader supporting the launch of new OEM production operations in Dublin, GA, with local production scheduled to begin in early May.

This role is responsible for ensuring operational readiness, quality alignment, and process stability during startup. Acting as the primary technical liaison at the assigned manufacturing site, this individual will bridge Operations, Quality, and Engineering functions to support consistent execution, rapid issue resolution, and early-stage production success.

The selected hire will begin employment on April 1, participating in structured onboarding and site training at an established production facility in Washington or South Carolina prior to supporting the Dublin launch.

Standard working hours are expected to follow a Monday–Friday day shift schedule (approximately 6:00am–2:30pm or 7:00am–3:30pm), with flexibility for overtime during ramp-up periods.

This is a critical leadership role supporting production startup and long-term operational stability.

Role & Responsibility:

Tasks That Will Lead To Your Success

• Serve as the primary Operations and Quality technical representative during production launch
• Drive compliance with manufacturing, process, and quality standards
• Support pre-production readiness and startup activities
• Lead root cause investigations and corrective action implementation
• Coordinate site-level quality processes including audits and nonconformance management
• Partner with cross-functional teams to resolve product, process, and supplier issues
• Monitor and report operational and quality performance metrics
• Ensure adherence to product specifications and inspection standards
• Support implementation of process controls, FMEAs, and standardized work
• Assist with product launch validation and stabilization
• Act as liaison between site operations and corporate technical teams
• Support outgoing quality processes and product audits
• Identify opportunities for yield, efficiency, and process improvements
• Travel as required to support training and launch readiness
• Reports/Span of Control: 2 Quality Inspectors

Skills & Experience

Qualifications That Will Help You Thrive

Required Experience

• Bachelor’s Degree in Engineering, Quality, or related field (or equivalent experience)
• 3+ years of experience in manufacturing operations or quality engineering
• Experience leading root cause analysis and corrective actions
• Working knowledge of SPC, FMEA, control plans, and CAPA
• Strong cross-functional coordination skills
• Ability to work onsite in Dublin, GA
• Willingness to travel for initial training in WA or SC
• Ability to support launch timelines including potential overtime

Preferred Experience

• Experience supporting manufacturing startup or ramp environments
• Experience in highly automated manufacturing settings
• Solar, electronics, or OEM manufacturing experience
• Lean, Green Belt, or Quality certifications