Remote Controller Jobs Jobs in Usa

Role: Maintenance Engineering Technician (PLC Programming)

Location: Liberty NC - Onsite

Industrial Maintenance experience in a manufacturing environment or equipment installation and debugging experience

Experience with Electrical and/or mechanical systems in an industrial manufacturing environment

Technical experience with PLCs in programming, including read, write and modify logic

Technical experience with Servo Motion Controllers

Technical experience with relay logic including wiring and troubleshooting

Technical experience with Robotics including programming and troubleshooting.

Experience with Hydraulic or Pneumatic troubleshooting and schematic reading

Availability to work overtime, holidays, weekends, and shutdowns

Ability for business travel, both domestic and international - up to 30%.

Added bonus if you have:

Technical associate degree or higher or equivalent experience

Experience in Pre-Production set up

Experience with Production Processes including Standardized Work (STW) and Job Instruction Sheets (JIS)

Experience gathering and analyzing quality data from multiple sources

New plant or facility startup experience

Experience with high volume production in a clean room environment

Role: SAP Project Manager (migrated from ECC to S4)

Location: Columbus, Ohio (Locals from Ohio preferred for very good candidate consider remote with travel)

Term: Fulltime-Permanent

The team

• You will join a high-impact SAP Transformation team driving enterprise-wide modernization initiatives across legacy SAP ECC and next-generation SAP S/4HANA environments. The team partners closely with CFO organizations, Finance leadership, IT executives, system integrators, and global delivery teams to execute complex R2R-led transformations.
• Focused on governance, innovation, and best-in-class SAP practices, the team leads end-to-end SAP programs — from roadmap and business case through stabilization and value realization ensuring alignment with enterprise transformation goals and minimal business disruption.

As a Senior SAP Project Manager, you will serve as the strategic delivery leader for complex SAP ECC and S/4HANA programs, with a strong emphasis on the Record-to-Report (R2R) domain.

You will:

• Lead large-scale SAP ECC 6.0 environments with deep focus in R2R
• Drive multiple full-lifecycle SAP S/4HANA implementations and conversions
• Define and execute the R2R practice vision, roadmap, and service offerings across:
• Universal Journal & General Ledger
• CO-PA
• Project Systems
• Asset Accounting
• Group Reporting & Consolidation
• Treasury, FP&A, RAR, RE-FX
• Integration with OTC and P2P processes
• Country-specific localizations
• Own program governance, risk management, budgeting, and executive reporting
• Lead RFP responses, solution proposals, estimations, and client presentations
• Conduct value discovery workshops with CFOs and Finance leaders
• Create executive-ready pitches for ECC to S/4HANA transformation
• Chair executive steering committees and transformation governance forums
• Oversee integration management across multi-workstream programs
• Apply SAP Activate/ASAP methodologies across Agile and Waterfall delivery models
• Drive adoption, stabilization, and value realization in live S/4HANA environments

What you’ll bring

• 8–15 years of ERP program leadership experience
• 2–3+ full end-to-end SAP S/4HANA implementations or conversions
• Deep expertise managing SAP ECC 6.0 environments, especially in R2R
• Strong Finance transformation knowledge across core SAP Finance modules
• Experience serving as Overall Integration Manager or Solution Architect on mid-to-large programs
• Proven ability to lead teams of 5–50+ resources (consulting + client)
• PMP or equivalent certification preferred
• Hands-on experience with SAP Activate or ASAP methodology
• Strong Microsoft proficiency (PowerPoint, Excel, Word, MS Project, Visio)
• Experience leading RFPs, scoping, and estimations for SAP programs
• Executive presence with ability to advise CFOs, Controllers, and Finance leaders
• Strong business process analysis, design, and consulting capabilities
• Auto industry experience (preferred)
• Exceptional communication, facilitation, and stakeholder management skills
• Bachelor’s degree required

Company: Talley LLP

Location: Orange, California (Remote-USA)

Title: Tax Accountant

About the Firm

Talley, LLP, and its affiliated entities—Talley Law Group, LLP (“TLG”), Talley Capital Group, LLC (“TCG”), and Talley Wealth Management, LLC (“TWM”) (collectively “Talley”)—is a full-service financial, tax, legal, and consulting organization serving entrepreneurially driven businesses and their owners. Talley partners with clients as business advisors, not just service providers, constantly seeking innovative ways to strengthen their bottom line.

Talley, LLP, was founded in 1989, with the mission of helping entrepreneurial driven businesses, their owners, and high net worth individuals, to manage their financial affairs and to achieve their business objectives profitably and efficiently. Our professionals strive to become each client’s Most Trusted Advisor (MTA) by delivering global solutions to our client’s complex challenges and opportunities.

Our services include:

• Audit & Assurance services, including financial reporting
• Tax compliance,
• Tax planning, and proactive advice
• Business consulting
• Estate planning, business planning, M&A, and tax law services delivered through TLG
• Outsourced accounting, controller and CFO services
• M&A, growth-through-acquisition, and operational consulting delivered through TCG

Talley is a boutique firm with 70+ U.S.-based professionals and 20–30 offshore/outsourced team members. Headquartered in Orange, CA, the firm has grown rapidly, becoming a leading Orange County professional services provider. We embrace a hybrid work culture built on accountability, results, and exceptional client service delivered by professional, motivated individuals.

Position Summary

The ideal candidate will report to the Tax Department Manager of Operations and collaborate closely with other tax staff, partners, and department managers. We are looking for someone with strong technical skills who is dedicated to becoming an MTA for our clients. The candidate will actively improve departmental processes, participate in training and development for team members, and support the firm's growth by embracing our various service initiatives. Our tax staff thrives in a dynamic and challenging environment, and we value teamwork and continuous improvement.

Essential Functions of the Position

Qualities

• Time Management
• Exceptional Organization Skills
• Strong Communication skills
• Responsiveness to time-sensitive items
• Attention to Detail
• Focus on client
• Ability to work independently
• Team Collaboration
• Strong Leadership skills
• Transparency
• Strong Work Ethic
• Being professional and respectful to others
• Positive Attitude

Technical Skills

• Be able to prepare more complex entity-level and individual tax returns, including multi-state, consolidated, foreign bank reporting, etc
• Ability to review less complex tax returns prepared by staff and outsourced providers.
• Fundamental understanding of tax law and ability to provide client recommendations for possible tax-saving opportunities
• Ability to perform fundamental tax research
• Address government agency's tax notifications
• Ability to prepare Trust Tax returns

Client Service

• Client interaction and liaison for various tax projects, including gathering appropriate information and resolving tax-related problems and notices
• Ability to review and identify tax planning opportunities
• Provide continuous tax return process during the year by interacting with clients and staying current on changes to the client's tax situation
• Provide superior service to our clients such that the clients provide referrals to their friends and colleagues.

Training and Personnel

• Participate in recruiting tax department staff and interns
• Provide technical on-the-job (OTJ) training to tax preparers and outsource providers.
• Provide informal mentoring to staff members
• Participation in department activities as a team player on behalf of the department and the firm.
• Demonstrate an ability to interact and work as a team member.
• Participate in a minimum of 40 hours of CPE per year and share with department and firm personnel
• Ability and desire to continue to develop technical, personal, and interpersonal skills and to participate in the MTA learning program.

Department

• Follow department policies and procedures
• Identify and look for process improvement ideas.
• Participate in weekly department meetings
• Assist as liaison with outsourced tax preparers

Preferred Attributes

Successful applicants will have a minimum of 2-4 years' experience preparing tax returns in a CPA firm.

• Active CPA required
• Bachelor’s Degree in Accounting is required.
• Software: CCH Engagement
• Financial and accounting experience; ability and willingness to work with a significant degree of autonomy; creativity; high service orientation
• Customer service focus
• Ability to get along well with diverse personalities; tactful, mature, and flexible.
• Ability to operate independently and “self-manage” projects
• Result-and profit-oriented, with the ability to balance other business considerations.
• Strong analytical and reasoning abilities
• High energy level, comfortable performing multifaceted projects in conjunction with everyday activities
• Superior numeric skills.
• Excellent written and verbal communication skills
• Ability to communicate and actively support the values of the firm and communicate these values to others

Note – HIL commissioning experience is required

Virtual HIL Commissioning Engineer

Location: Auburn Hills, MI (Onsite)

Rate: $35/hr.w2 (max)

JD:

The Virtual Test Engineer is responsible for delivering a stable and representative test environment to perform automated testing and functional integration of distributed features. This engineer should be capable of working with various Engineering Support teams including systems, wiring, design release engineers, and software teams as required to validate electrical features on the bench and resolve any electrical issues before it gets to production to support successful vehicle launch. Responsibilities include:

• Identify system boundaries and define requirements for simulator I/O, instrumentation, and automation solutions

• Define test scope and instrumentation strategies

• Model, Simulate powertrain features

• Help with commissioning of features related to transmission, engine and other powertrain module

• Collaborates with core engineers, suppliers, feature experts and test engineers to design, implement and troubleshoot instrumentation as required

• Review component level electrical schematics and functional specifications and translate the requirements into hardware and signal requirements for virtual implementation

• Validate and troubleshoots simulator and maintain test benches

• Troubleshoots vehicle systems and test environment functionality to minimize false positive incident reports

What you need for this position:

Basic Qualifications:

• Bachelor of Science in Electrical, Computer Engineering or Computer Science

• Relevant automotive experience

• Knowledge of CAN based communication and diagnostic tools – Vector CANalyzer/CANoe

• Proficient with Modeling

• Good knowledge and understanding of DSpace Tools – config desk, automation desk, control desk etc..

• Proficiency in the understanding of embedded controller networks (CAN, LIN)

Preferred Qualifications:

• Familiarity with development and verification of plant and control models in Matlab/Simulink for execution in hardware in the loop test environments

• Experience with dSpace hardware architecture, design, setup, and troubleshooting

• Bench functional integration, test execution, measuring and instrumentation experience

Summary:

About the Engagement: We're seeking a senior contract Kafka/Confluent administrator to own and evolve our on-prem event streaming platform, with a primary focus on Confluent Platform You will lead planning and execution of a hardware refresh for our on-prem clusters, drive rehability and performance, and embed DevOps/automation across provisioning, deployment, cheervability, and incident response. Experience with Apache Kafka and AWS MSK is desired for secondary support and cross-environment alignment. Comprehensive documentation and ranbooks are required deliverables

Kafka Platform support key Responsibilities

Design, deploy, and operate highly available Kafka clusters (on-prem, cloud, and/or managed services such as Confluent Cloud or AWS MSK).

Manage topics, partitions, quotas, retention policies, and consumer group strategies for performance and cost.

Own upgrades, patches, and migrations.

Implement and manage Kafka components: Kafka Connect, Schema Registry, MirrorMaker/Confluent Replicator, REST Proxy; familiarity with Kafka Streams and ksqlDB is a plus.

Performance tuning (producers/consumers, batching, compression, acks, ISR, controller health), throughput testing, and benchmarking.

Job Summary:

We are seeking a Systems Engineer with 3–5 years of experience in feature or system ownership within off-highway vehicle platforms. The ideal candidate will be responsible for defining, developing, and managing system-level requirements and supporting communication architecture using CAN or Ethernet-based networks.

Key Responsibilities:

• Own and manage system or feature development from concept through validation.
• Generate high-level requirements and decompose them into detailed functional and technical requirements.
• Break down complex features into structured system requirements.
• Collaborate with cross-functional teams including software, hardware, validation, and controls.
• Support system architecture definition for off-highway vehicle applications.
• Work with CAN and/or Ethernet-based communication networks.
• Participate in system integration, validation, and issue resolution activities.
• Ensure traceability of requirements and compliance with system standards.
• Support documentation, reviews, and change management processes.

Required Qualifications:

• Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Systems Engineering, or related field.
• 3–5 years of experience in systems engineering or feature ownership.
• Experience in off-highway, heavy equipment, or automotive domain.
• Strong experience in requirements generation and requirement decomposition.
• Knowledge of CAN (Controller Area Network) and/or Ethernet communication protocols.
• Understanding of system lifecycle processes (V-model preferred).
• Strong analytical and communication skills.

Preferred Skills:

• Experience with requirement management tools (DOORS, Polarion, etc.).
• Knowledge of embedded systems and control systems.
• Exposure to diagnostics and network architecture.
• Familiarity with safety standards and system validation processes

We’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more.

As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing.

When you join ALTEN Technology USA, you’ll collaborate on some of the world’s toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.

Job Description:

Position Overview:

• We are seeking a highly skilled and experienced Software Defined Vehicle (SDV)
• System Architect to join our team.
• The ideal candidate will play a pivotal role in designing and
• implementing the architecture for our next-generation software-defined vehicles.
• This role requires a deep understanding of automotive systems, software development, and system integration.

Key Responsibilities:

• Requirements Analysis: Analyze customer and stakeholder requirements and derive system constraints for finding optimized solutions for software-defined vehicle systems.
• Design: Develop and define overall system HLD for software-defined vehicle systems, ensuring key constraints like safety, security, privacy, regulatory compliance along with scalability, reliability, and performance in mind.
• Apply a data-driven approach in evaluating design alternatives considering futuristic mindset and document the decisions.
• Interface Development: Develop system interfaces for signal oriented or service-oriented Architectures using standard interface definition language (IDL) and create comprehensive API documentation.
• System Modeling: Model system components using SysML/UML tools.
• DFMEA: Own and craft DFMEAs through the standard development process.
• Support product/feature validation and failure root cause analysis.
• System Integration: Collaborate with cross-functional teams to integrate software with hardware components.
• Verification and validation: Ensure quality and reliability of software and hardware through rigorous testing and validation processes.
• Technical Leadership: Provide technical guidance and mentorship to engineers, ensuring best practices in software development and system design.
• Automation and Quality Measures: Champion automation of software and system quality measures at all stages – requirements, design, development, and integration – leveraging tools and techniques like TDD, Gherkin (BDD), TestRail, and Google Test.

Qualifications:

• Education: Bachelor’s or Master’s degree in computer science, Electrical or Electronics
• Engineering, Mechatronics, Robotics, or a related field.

Experience:

• Minimum of 8 years of experience in software architecture, system design, and integration within the automotive industry.
• 5 years of experience in Systems Engineering, preferably in the Automotive domain.
• 5 years of proven working experience in Software Engineering – embedded.
• 3 years of programming experience in C / C++ / Python.
• 3 years of work experience in Agile project involvement.
• Familiarity with ASPICE, ISO 26262, and SAE standards.
• Familiarity with connected vehicle distributed systems, embedded automotive development boards (Qualcomm, Renesas, NXP, etc.).
• Knowledge of SysML and modeling language/tools.
• Automotive domain experience in component-level system design and integration using automotive network technologies (LIN, CAN, Ethernet)
• Knowledge of AUTOSAR software stack, Android software stack, domain controller architecture, and software-defined architecture.
• Knowledge of communication protocols like MQTT, gRPC, SOME/IP.
• Experience with unit, integration, regression, user testing, and load testing.
• Exceptional analytical and problem-solving skills.
• Excellent leadership and interpersonal skills.
• Great collaboration and communication skills.

Preferred Qualifications:

• Experience in hands-on development and troubleshooting of embedded systems.
• Experience in functional safety and cybersecurity.
• Understanding of SOLID design principles and clean code practices.
• Experience with CI/CD tools and developing automation frameworks.
• Knowledge of service-oriented architecture concepts, and microservices architecture principles.

Why Join Us:

• Opportunity to work on cutting-edge technology in the automotive industry.
• Collaborative and innovative work environment.
• Competitive salary and benefits package.
• Career growth and development opportunities.

ALTEN Technology is an Equal Opportunity Employer. Our Policy is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual’s age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status.

Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process.

Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans’ Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

Senior Staff Electrical Engineer

Littleton, CO

Our exciting Space client are inneed of an Electrical Engineer to support avionics development, power distribution, power processing units and power regulating systems for spacecraft and Propulsion systems.

Responsibilities and Duties:

• The Sr. Staff Electrical Engineer will be responsible for performing design, analysis, and research tasks as they relate to electronics used for avionics, power distribution, power storage and power controllers for microsatellites and Propulsion power processing units (PPU).
• Responsible for medium to large sized projects or components and will be expected to work within the electrical engineering team to solve complex problems and support and mentor more junior engineers in their tasks as they relate to electrical circuit design.
• Develop electronic hardware, including part selection, schematic capture, layout, and fabrication data for circuit board designs Support fabrication, test and debugging of hardware.
• Document test results and customer requirements, assist with the development of production procedures for designs.

Required Qualifications and Skills:

• 10+ years experience in electrical circuit design, with a focus on power converter design, with preferred experience in spacecraft electronics design.
• Proficient in Circuit analyses such as gain/phase analysis, stress/derating, reliability, etc.
• Expert in custom, mid-high power (>2kW desired) supply design for Printed Circuit Board Assemblies (PCBAs)
• Proficient with general lab equipment for board bring-up (oscilloscopes, power supplies, soldering etc)
• Proficient with testing and debugging circuitry.
• Proficient with schematic capture/PCB layout software
• Good written and verbal communication skills

Desired Qualifications and Skills:

• Experience with Altium software – other similar tools fine
• Experience with SiMetrix and/or LTSpice – other similar tools fine
• Simulation Tools Experience with GitLab and Jira
• Knowledge of space environments and design implications

If you are interested then please apply today.

Key Responsibilities:

Job Description

We are seeking a skilled Matlab Simulink Developer with expertise in Matlab Model-Based Development to design moderately complex algorithms using model-based design tools. The ideal candidate will have a strong understanding of the principles, techniques, and procedures used in Matlab and Simulink.

Responsibilities

• Design and develop algorithms using Matlab and Simulink for model-based development.
• Create and maintain appropriate design documentation for review purposes.
• Utilize mathematical models and computer-aided engineering/scientific design tools such as Matlab/Simulink and Math CAD to simulate steady state, dynamic, and transient operation of embedded controls.
• Perform product-level testing to ensure system functionality and reliability.
• Develop Matlab Simulink models to produce embedded software for generator set and automatic transfer switch controllers.
• Apply knowledge of electrical systems in the power generation industry, including distributed/embedded power generation, conventional centralized power generation, and islanded/standalone power systems.

Essential Skills

• Proficiency in Matlab and Simulink for model-based development.
• Experience in performance simulation using mathematic models and computer-aided engineering/scientific design tools.
• Ability to create and review design documentation.
• Experience in product-level testing of embedded controls.

Additional Skills & Qualifications

• Understanding of electrical systems in the power generation industry.

Job Title: Telecom Analyst – Hiring FAST!

Industry: Utilities

Location: Charlotte, NC

Pay Rate: $50/HR on W2 Only – NO C2C

Setting: Hybrid Required (Remote is NOT an Option)

Duration: 12+ months

Job ID: 243300

Required Qualifications:

• Minimum of 5 - 7 years of experience in Information Technology with at least five years of design and support of Cisco Systems products.
• Understanding of communication technology and fundamentals.
• Ability to work well within a team, good interpersonal relational skills.
• Effective verbal & written communication.
• Experience in coordination with multiple groups, companies, and people simultaneously.
• Demonstrated ability to work productively with little direct supervision.
• Demonstrated organizational and time management skills
• Ability to effectively prioritize multiple tasks.
• Strong interpersonal skills to support successful performance in a team environment.

Desired Qualifications:

• Cisco Certifications CCNA, CCDA desired. CCNP, CCDP, CCIE preferred.
• Experience with network hardware/software solutions: Cisco routers and switches, Cisco ACS, Cisco wireless controllers and APs and Cisco VPN concentrators.
• Experience in the following technology areas: TCP/IP, Cisco IOS, Layer 3 Switching, RIP, OSPF, EIGRP, GRE, HSRP, GLBP, IPSEC, SSL, AAA, SNMP.