Presto Tape Jobs in Usa
402 positions found — Page 3
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Industrial Maintenance Electricians, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.As a Industrial Maintenance Electrician you will be a vital part of our manufacturing team installing, maintaining electrical equipment. Operate, install electrical systems and preform functional of building and plant equipment.
You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.
Position Responsibilities:
Operate, install electrical systems and perform functional testing of building and plant equipment (e.g., machines, motor controls, room re-models)
Determine if system should be shut down or work must be performed with power source on
Lock out, tag out, try out equipment and related systems
Perform primary and secondary testing on electrical breakers during routine maintenance; replace, update and retro fit breakers
Perform routine tests on high voltage switches and relays, using hi-potential test equipment (Hipot), replace switch or relay
Troubleshoot electric motors using appropriate test equipment
Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system
Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel
Service and maintain electrical systems on various types of overhead cranes
Operate, install electrical systems and perform functional test of building and plant equipment (e.g., machines, motor controls, room re-models)
Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent, halide, standard); clean and check sockets, and replace ballast and bulbs
Run high voltage electrical cable from sub-station to unit station; cut and splice cable, test cable for resistance
Install, replace and repair fiber optic cable for computers and computing systems
Bend conduit and install junction boxes; pull wire of various gauge and color through conduit using a fish tape; install and connect switches and outlets
Check work after completion or after each operation; ensure job is per drawing and WAC, NEC codes; evaluate job for work to be performed (e.g., wire size, electrical load, conduit)
Operate mechanical lifts of various types (e.g. tiger lift, spider lift, snorkel lift), to access work areas
Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in plant electrical systems
Establish/verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters)
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications
3+ years of experience as an Electrician or Apprentice.
1+ years of experience maintaining industrial equipment.
Experience working from heights and using fall protection equipment with weight limitations .
Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.
Must be able to complete fall protection training.
Preferred Qualifications:
Electrician license (EL01 &/or EL 07) or an electrical card.
Crane related experience.
Experience with prime power.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidate must live in the immediate are or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for all shifts
Total Rewards & Pay Transparency
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $33.32 per hour – $61.01 per hour
Applications for this position will be accepted until May. 29, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Unleash Your Potential at Quad – Don't Miss Out!
Ready to supercharge your career and make a lasting impact? At Quad, we're excited to welcome ambitious individuals who are driven to excel. Are you mechanically inclined or maintenance-savvy? Ready to take on a new challenge? Look no further! We're looking for motivated, detail-oriented individuals to join our team in Franklin, WI. Your adventure to success begins now – grab this opportunity!
Quad Packaging is seeking Folder/Gluer Operators for our Franklin, WI location. We have an opening on the second shift. This is your opportunity to enhance your skills working with the industry’s most advanced Packaging equipment. At Quad, we value your experience and offer a competitive starting wage, with the potential for up to $25 or more for those with folder/gluer experience. We may also provide paid relocation for highly qualified candidates living over 100 miles from our plant.
Headquartered in Wisconsin, Quad is a marketing experience company that helps brands make direct consumer connections, from household to instore to online. The company does this through its MX Solutions Suite, a comprehensive range of marketing and print services that seamlessly integrate creative, production, and media solutions across online and offline channels. Supported by state-of-the-art technology and data-driven intelligence, Quad simplifies the complexities of marketing by removing friction wherever it occurs along the marketing journey. With approximately 11,000 employees in 11 countries, we serve around 2,100 clients, including industry-leading blue-chip companies that serve both business and consumers in multiple industry verticals, with a particular focus on commerce, including retail, consumer packaged goods, and direct-to-consumer; financial services; and health. Quad is ranked among the largest agency companies in the U.S. by Ad Age, buoyed by its full-service media agency, Rise, and creative agency, Betty. Quad is also one of the largest commercial printers in North America, according to Printing Impressions.
Our 250,000 sq. ft. facility in Franklin, WI is a state-of-the-art packaging plant that serves a diverse range of clients, including local breweries, grocery stores, yogurt producers, automotive part suppliers, and well-known battery brands. We offer Sheetfed offset, and narrow-web flexo, along with die cutting and custom folding/gluing, all supported by advanced inline quality control systems.
The facility is well-lit with both natural and artificial lighting, climate-controlled, and impeccably clean. We take great pride in fostering a friendly, team-oriented atmosphere where everyone collaborates to achieve our goals!
We have the following shift option to offer:
You will work 9 pm - 5 am, Monday-Thursday + $1.50 shift premium. If hired, you may not train on the shift you were hired for.
The Operator performs set-up and operates the machine to automatically fold, glue, and affix inserts and/or outserts, security tags, and adhesive labels on preprinted stock to ensure that production accurately meets the customer job order.
This plant operates a 10-hour shift schedule, and our open shift option is below. Please note that hours are subject to change to working either 8-hour or 12-hour shifts, due to production needs.
Job Duties:
- Performs make-ready functions.
- Production: Activate process; monitor production and adjust machine during production run as required. Synchronize the speed of the machine to maximize the crew's output.
- Perform and/or arrange for preventative maintenance according to schedule.
- Record router information and information for daily production sheets such as time spent on specific tasks, number of items produced, etc.
- Operators frequently operate and oversee the operation of more than one feeder/gluer operation at one time.
- Occasionally train workers on the Folding and Gluing Machine operations and the feeding and take-off functions.
- Cross-train as assigned.
- EXAMPLES OF POWERED EQUIPMENT USED: Folding and gluing machines, automatic sealing equipment, Inserters, Tape Heads, computers, trash compactor, automatic labelers (EAM), and roller-conveyor table.
Required Qualifications:
- Previous Bobst Expertfold 110, Domino 110, Mistral 110, Masterfold 15 or Domino 90 Folder/Gluer experience preferred (other makes and models will be considered).
- Able to perform work-related functions requiring the ability to add, subtract, multiply, and divide.
- Read, speak, and understand the English language sufficient to interpret instructions, job orders, production sheets, and work-related documents.
- Able to communicate problems and malfunctions to co-workers and lead/management.
- Familiar with production and processing. Understands inputs, outputs, raw materials, waste, quality control, costs, and techniques for maximizing the manufacture and distribution of goods. Able to analyze needs and production requirements.
- Troubleshooting experience and skill sufficient to analyze the process, determine what is causing an operating error and/or identify what must be changed, and generate some possible solutions and/or use logic and analysis to decide what to do about it.
- Candidates MUST be on time and reliable.
- Must be able to lift 10-15 pounds continuously, up to 50 pounds occasionally throughout the shift.
Additional Information
The actual rate of pay offered will vary based upon, but not limited to: education, skills, experience, proficiency, performance, shift, and location. In addition to base salary, depending on the role, the total compensation package may also include overtime and shift differentials. Quad offers benefits including medical, dental, and vision coverage, paid time off, disability insurance, annual discretionary match to 401(k) based on company performance, life insurance, and other voluntary supplemental insurance coverages, plus childbirth short-term disability insurance, paid parental leave, adoption & surrogacy benefits, pet insurance, and more!
If you're ready to take the next step in your career with Quad, apply today and become part of a team that values growth, innovation, and your potential to excel.
We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.
Quad is proud to be an equal opportunity employer. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.
Drug-Free Workplace
General Summary of Position
Assists physician with routine to complex invasive diagnostic and therapeutic cardiovascular procedures such as cardiac catheterizations; cardiac and vascular percutaneous transluminal angioplasties structural heart and other interventional procedures. Performs a variety of related ancillary support activities and other duties as assigned.
Primary Duties and Responsibilities
- Assists/scrubs in with physician during routine to complex invasive diagnostic and therapeutic cardiac and vascular procedures. Prepares catheters balloons guiding wires etc. to physician as needed.
- Prepares cleans and drapes appropriate site prior to invasive procedure ensuring a sterile field according to Association of Operating Room Nurse (AORN) standards.
- Enters required patient data into the computer connects electrocardiograph (EKG) and pulse oximeter monitors. Provides physical and psychological comfort to patients prior to during and post-procedure.
- Monitors electrocardiograph (ECG) blood pressure and other hemodynamic parameters during procedure in the Cardiac Catherization Laboratory (CCL).
- Assists with intra-aortic balloon pump (IABP) other cardiac assist devices and sets-up/removes arterial and venous lines as needed in the CCL CCU and ICU. Draws arterial blood gases (ABG) as requested by physician. Performs activated coagulation time tests to determine appropriate arterial/venous sheaths removal. Accompanies and monitors patient during transports.
- Prepares/cleans arranges and stocks room/equipment for next procedure. Maintains and stocks inventory such as catheters defibrillators monitors and temporary pacemakers. Provides monitors/external pacemakers to various locations within the hospital.
- Document required data prior to during and post-procedure and enters appropriate codes/charges/equipment used into computer for statistical/billing reports.
- Discharges/transports patients from procedure room. Communicates/instructs patient regarding post procedure site care instructions and precautions as appropriate.
- Provides patient's family/significant others with information related to procedures according to departmental policy and procedures.
- Participates/responds to post-cardiac catheterization site bleeding hematomas pain loss of distal pulse etc. as appropriate and documents findings and resolution.
- Participates in the orientation training and inservices of other/new personnel as defined by CCL manager and departmental educator.
- Administers contrast at the direction of the physician while the physician is in the room directing the administration and dosage.
Minimal Qualifications
Education
- High School Diploma or GED including completion of a Cardiovascular Technologist training program and/or related college level education in basic sciences. required
Experience
- Experience in cardiovascular laboratory procedures particularly as relates to cardiac and vascular interventional procedures preferred
Licenses and Certifications
- RCIS - Registered Cardiovascular Invasive Specialist with Cardiovascular Credentialing International (CCI) within 1 Year required or
- R.T.(R)(CI) - Registered Technologist in Cardiac-Interventional Radiography within 1 Year required
- CPR - Cardiac Pulmonary Resuscitation (includes BLS and NRP) for healthcare providers from either the American Heart Association (AHA) or American Red Cross within 90 Days required
- Additional unit/specialty certifications may vary by department or business unit.
- Health Services\ACLS required
Knowledge Skills and Abilities
- May require the use of specialized medical equipment (i.e. EEG EKG blood analyzer) or data processing equipment (i.e. tape drives consoles).
General Summary of Position
Assists physician with routine to complex invasive diagnostic and therapeutic cardiovascular procedures such as cardiac catheterizations; cardiac and vascular percutaneous transluminal angioplasties structural heart and other interventional procedures. Performs a variety of related ancillary support activities and other duties as assigned.
Primary Duties and Responsibilities
- Assists/scrubs in with physician during routine to complex invasive diagnostic and therapeutic cardiac and vascular procedures. Prepares catheters balloons guiding wires etc. to physician as needed.
- Prepares cleans and drapes appropriate site prior to invasive procedure ensuring a sterile field according to Association of Operating Room Nurse (AORN) standards.
- Enters required patient data into the computer connects electrocardiograph (EKG) and pulse oximeter monitors. Provides physical and psychological comfort to patients prior to during and post-procedure.
- Monitors electrocardiograph (ECG) blood pressure and other hemodynamic parameters during procedure in the Cardiac Catherization Laboratory (CCL).
- Assists with intra-aortic balloon pump (IABP) other cardiac assist devices and sets-up/removes arterial and venous lines as needed in the CCL CCU and ICU. Draws arterial blood gases (ABG) as requested by physician. Performs activated coagulation time tests to determine appropriate arterial/venous sheaths removal. Accompanies and monitors patient during transports.
- Prepares/cleans arranges and stocks room/equipment for next procedure. Maintains and stocks inventory such as catheters defibrillators monitors and temporary pacemakers. Provides monitors/external pacemakers to various locations within the hospital.
- Document required data prior to during and post-procedure and enters appropriate codes/charges/equipment used into computer for statistical/billing reports.
- Discharges/transports patients from procedure room. Communicates/instructs patient regarding post procedure site care instructions and precautions as appropriate.
- Provides patient's family/significant others with information related to procedures according to departmental policy and procedures.
- Participates/responds to post-cardiac catheterization site bleeding hematomas pain loss of distal pulse etc. as appropriate and documents findings and resolution.
- Participates in the orientation training and inservices of other/new personnel as defined by CCL manager and departmental educator.
- Administers contrast at the direction of the physician while the physician is in the room directing the administration and dosage.
Minimal Qualifications
Education
- High School Diploma or GED including completion of a Cardiovascular Technologist training program and/or related college level education in basic sciences. required
Experience
- Experience in cardiovascular laboratory procedures particularly as relates to cardiac and vascular interventional procedures preferred
Licenses and Certifications
- RCIS - Registered Cardiovascular Invasive Specialist with Cardiovascular Credentialing International (CCI) within 1 Year required or
- R.T.(R)(CI) - Registered Technologist in Cardiac-Interventional Radiography within 1 Year required
- CPR - Cardiac Pulmonary Resuscitation (includes BLS and NRP) for healthcare providers from either the American Heart Association (AHA) or American Red Cross within 90 Days required
- Additional unit/specialty certifications may vary by department or business unit.
- Health Services\ACLS required
Knowledge Skills and Abilities
- May require the use of specialized medical equipment (i.e. EEG EKG blood analyzer) or data processing equipment (i.e. tape drives consoles).
General Summary of Position
Assists physician with routine to complex invasive diagnostic and therapeutic cardiovascular procedures such as cardiac catheterizations; cardiac and vascular percutaneous transluminal angioplasties structural heart and other interventional procedures. Performs a variety of related ancillary support activities and other duties as assigned.
Primary Duties and Responsibilities
- Assists/scrubs in with physician during routine to complex invasive diagnostic and therapeutic cardiac and vascular procedures. Prepares catheters balloons guiding wires etc. to physician as needed.
- Prepares cleans and drapes appropriate site prior to invasive procedure ensuring a sterile field according to Association of Operating Room Nurse (AORN) standards.
- Enters required patient data into the computer connects electrocardiograph (EKG) and pulse oximeter monitors. Provides physical and psychological comfort to patients prior to during and post-procedure.
- Monitors electrocardiograph (ECG) blood pressure and other hemodynamic parameters during procedure in the Cardiac Catherization Laboratory (CCL).
- Assists with intra-aortic balloon pump (IABP) other cardiac assist devices and sets-up/removes arterial and venous lines as needed in the CCL CCU and ICU. Draws arterial blood gases (ABG) as requested by physician. Performs activated coagulation time tests to determine appropriate arterial/venous sheaths removal. Accompanies and monitors patient during transports.
- Prepares/cleans arranges and stocks room/equipment for next procedure. Maintains and stocks inventory such as catheters defibrillators monitors and temporary pacemakers. Provides monitors/external pacemakers to various locations within the hospital.
- Document required data prior to during and post-procedure and enters appropriate codes/charges/equipment used into computer for statistical/billing reports.
- Discharges/transports patients from procedure room. Communicates/instructs patient regarding post procedure site care instructions and precautions as appropriate.
- Provides patient's family/significant others with information related to procedures according to departmental policy and procedures.
- Participates/responds to post-cardiac catheterization site bleeding hematomas pain loss of distal pulse etc. as appropriate and documents findings and resolution.
- Participates in the orientation training and inservices of other/new personnel as defined by CCL manager and departmental educator.
- Administers contrast at the direction of the physician while the physician is in the room directing the administration and dosage.
Minimal Qualifications
Education
- High School Diploma or GED including completion of a Cardiovascular Technologist training program and/or related college level education in basic sciences. required
Experience
- Experience in cardiovascular laboratory procedures particularly as relates to cardiac and vascular interventional procedures preferred
Licenses and Certifications
- RCIS - Registered Cardiovascular Invasive Specialist with Cardiovascular Credentialing International (CCI) within 1 Year required or
- R.T.(R)(CI) - Registered Technologist in Cardiac-Interventional Radiography within 1 Year required
- CPR - Cardiac Pulmonary Resuscitation (includes BLS and NRP) for healthcare providers from either the American Heart Association (AHA) or American Red Cross within 90 Days required
- Additional unit/specialty certifications may vary by department or business unit.
- Health Services\ACLS required
Knowledge Skills and Abilities
- May require the use of specialized medical equipment (i.e. EEG EKG blood analyzer) or data processing equipment (i.e. tape drives consoles).
General Summary of Position
Assists physician with routine to complex invasive diagnostic and therapeutic cardiovascular procedures such as cardiac catheterizations; cardiac and vascular percutaneous transluminal angioplasties structural heart and other interventional procedures. Performs a variety of related ancillary support activities and other duties as assigned.
Primary Duties and Responsibilities
- Assists/scrubs in with physician during routine to complex invasive diagnostic and therapeutic cardiac and vascular procedures. Prepares catheters balloons guiding wires etc. to physician as needed.
- Prepares cleans and drapes appropriate site prior to invasive procedure ensuring a sterile field according to Association of Operating Room Nurse (AORN) standards.
- Enters required patient data into the computer connects electrocardiograph (EKG) and pulse oximeter monitors. Provides physical and psychological comfort to patients prior to during and post-procedure.
- Monitors electrocardiograph (ECG) blood pressure and other hemodynamic parameters during procedure in the Cardiac Catherization Laboratory (CCL).
- Assists with intra-aortic balloon pump (IABP) other cardiac assist devices and sets-up/removes arterial and venous lines as needed in the CCL CCU and ICU. Draws arterial blood gases (ABG) as requested by physician. Performs activated coagulation time tests to determine appropriate arterial/venous sheaths removal. Accompanies and monitors patient during transports.
- Prepares/cleans arranges and stocks room/equipment for next procedure. Maintains and stocks inventory such as catheters defibrillators monitors and temporary pacemakers. Provides monitors/external pacemakers to various locations within the hospital.
- Document required data prior to during and post-procedure and enters appropriate codes/charges/equipment used into computer for statistical/billing reports.
- Discharges/transports patients from procedure room. Communicates/instructs patient regarding post procedure site care instructions and precautions as appropriate.
- Provides patient's family/significant others with information related to procedures according to departmental policy and procedures.
- Participates/responds to post-cardiac catheterization site bleeding hematomas pain loss of distal pulse etc. as appropriate and documents findings and resolution.
- Participates in the orientation training and inservices of other/new personnel as defined by CCL manager and departmental educator.
- Administers contrast at the direction of the physician while the physician is in the room directing the administration and dosage.
Minimal Qualifications
Education
- High School Diploma or GED including completion of a Cardiovascular Technologist training program and/or related college level education in basic sciences. required
Experience
- Experience in cardiovascular laboratory procedures particularly as relates to cardiac and vascular interventional procedures preferred
Licenses and Certifications
- RCIS - Registered Cardiovascular Invasive Specialist with Cardiovascular Credentialing International (CCI) within 1 Year required or
- R.T.(R)(CI) - Registered Technologist in Cardiac-Interventional Radiography within 1 Year required
- CPR - Cardiac Pulmonary Resuscitation (includes BLS and NRP) for healthcare providers from either the American Heart Association (AHA) or American Red Cross within 90 Days required
- Additional unit/specialty certifications may vary by department or business unit.
- Health Services\ACLS required
Knowledge Skills and Abilities
- May require the use of specialized medical equipment (i.e. EEG EKG blood analyzer) or data processing equipment (i.e. tape drives consoles).
General Summary of Position
Assists physician with routine to complex invasive diagnostic and therapeutic cardiovascular procedures such as cardiac catheterizations; cardiac and vascular percutaneous transluminal angioplasties structural heart and other interventional procedures. Performs a variety of related ancillary support activities and other duties as assigned.
Primary Duties and Responsibilities
- Assists/scrubs in with physician during routine to complex invasive diagnostic and therapeutic cardiac and vascular procedures. Prepares catheters balloons guiding wires etc. to physician as needed.
- Prepares cleans and drapes appropriate site prior to invasive procedure ensuring a sterile field according to Association of Operating Room Nurse (AORN) standards.
- Enters required patient data into the computer connects electrocardiograph (EKG) and pulse oximeter monitors. Provides physical and psychological comfort to patients prior to during and post-procedure.
- Monitors electrocardiograph (ECG) blood pressure and other hemodynamic parameters during procedure in the Cardiac Catherization Laboratory (CCL).
- Assists with intra-aortic balloon pump (IABP) other cardiac assist devices and sets-up/removes arterial and venous lines as needed in the CCL CCU and ICU. Draws arterial blood gases (ABG) as requested by physician. Performs activated coagulation time tests to determine appropriate arterial/venous sheaths removal. Accompanies and monitors patient during transports.
- Prepares/cleans arranges and stocks room/equipment for next procedure. Maintains and stocks inventory such as catheters defibrillators monitors and temporary pacemakers. Provides monitors/external pacemakers to various locations within the hospital.
- Document required data prior to during and post-procedure and enters appropriate codes/charges/equipment used into computer for statistical/billing reports.
- Discharges/transports patients from procedure room. Communicates/instructs patient regarding post procedure site care instructions and precautions as appropriate.
- Provides patient's family/significant others with information related to procedures according to departmental policy and procedures.
- Participates/responds to post-cardiac catheterization site bleeding hematomas pain loss of distal pulse etc. as appropriate and documents findings and resolution.
- Participates in the orientation training and inservices of other/new personnel as defined by CCL manager and departmental educator.
- Administers contrast at the direction of the physician while the physician is in the room directing the administration and dosage.
Minimal Qualifications
Education
- High School Diploma or GED including completion of a Cardiovascular Technologist training program and/or related college level education in basic sciences. required
Experience
- Experience in cardiovascular laboratory procedures particularly as relates to cardiac and vascular interventional procedures preferred
Licenses and Certifications
- RCIS - Registered Cardiovascular Invasive Specialist with Cardiovascular Credentialing International (CCI) within 1 Year required or
- R.T.(R)(CI) - Registered Technologist in Cardiac-Interventional Radiography within 1 Year required
- CPR - Cardiac Pulmonary Resuscitation (includes BLS and NRP) for healthcare providers from either the American Heart Association (AHA) or American Red Cross within 90 Days required
- Additional unit/specialty certifications may vary by department or business unit.
- Health Services\ACLS required
Knowledge Skills and Abilities
- May require the use of specialized medical equipment (i.e. EEG EKG blood analyzer) or data processing equipment (i.e. tape drives consoles).
General Summary of Position
Assists physician with routine to complex invasive diagnostic and therapeutic cardiovascular procedures such as cardiac catheterizations; cardiac and vascular percutaneous transluminal angioplasties structural heart and other interventional procedures. Performs a variety of related ancillary support activities and other duties as assigned.
Primary Duties and Responsibilities
- Assists/scrubs in with physician during routine to complex invasive diagnostic and therapeutic cardiac and vascular procedures. Prepares catheters balloons guiding wires etc. to physician as needed.
- Prepares cleans and drapes appropriate site prior to invasive procedure ensuring a sterile field according to Association of Operating Room Nurse (AORN) standards.
- Enters required patient data into the computer connects electrocardiograph (EKG) and pulse oximeter monitors. Provides physical and psychological comfort to patients prior to during and post-procedure.
- Monitors electrocardiograph (ECG) blood pressure and other hemodynamic parameters during procedure in the Cardiac Catherization Laboratory (CCL).
- Assists with intra-aortic balloon pump (IABP) other cardiac assist devices and sets-up/removes arterial and venous lines as needed in the CCL CCU and ICU. Draws arterial blood gases (ABG) as requested by physician. Performs activated coagulation time tests to determine appropriate arterial/venous sheaths removal. Accompanies and monitors patient during transports.
- Prepares/cleans arranges and stocks room/equipment for next procedure. Maintains and stocks inventory such as catheters defibrillators monitors and temporary pacemakers. Provides monitors/external pacemakers to various locations within the hospital.
- Document required data prior to during and post-procedure and enters appropriate codes/charges/equipment used into computer for statistical/billing reports.
- Discharges/transports patients from procedure room. Communicates/instructs patient regarding post procedure site care instructions and precautions as appropriate.
- Provides patient's family/significant others with information related to procedures according to departmental policy and procedures.
- Participates/responds to post-cardiac catheterization site bleeding hematomas pain loss of distal pulse etc. as appropriate and documents findings and resolution.
- Participates in the orientation training and inservices of other/new personnel as defined by CCL manager and departmental educator.
- Administers contrast at the direction of the physician while the physician is in the room directing the administration and dosage.
Minimal Qualifications
Education
- High School Diploma or GED including completion of a Cardiovascular Technologist training program and/or related college level education in basic sciences. required
Experience
- Experience in cardiovascular laboratory procedures particularly as relates to cardiac and vascular interventional procedures preferred
Licenses and Certifications
- RCIS - Registered Cardiovascular Invasive Specialist with Cardiovascular Credentialing International (CCI) within 1 Year required or
- R.T.(R)(CI) - Registered Technologist in Cardiac-Interventional Radiography within 1 Year required
- CPR - Cardiac Pulmonary Resuscitation (includes BLS and NRP) for healthcare providers from either the American Heart Association (AHA) or American Red Cross within 90 Days required
- Additional unit/specialty certifications may vary by department or business unit.
- Health Services\ACLS required
Knowledge Skills and Abilities
- May require the use of specialized medical equipment (i.e. EEG EKG blood analyzer) or data processing equipment (i.e. tape drives consoles).
General Summary of Position
Assists physician with routine to complex invasive diagnostic and therapeutic cardiovascular procedures such as cardiac catheterizations; cardiac and vascular percutaneous transluminal angioplasties structural heart and other interventional procedures. Performs a variety of related ancillary support activities and other duties as assigned.
Primary Duties and Responsibilities
- Assists/scrubs in with physician during routine to complex invasive diagnostic and therapeutic cardiac and vascular procedures. Prepares catheters balloons guiding wires etc. to physician as needed.
- Prepares cleans and drapes appropriate site prior to invasive procedure ensuring a sterile field according to Association of Operating Room Nurse (AORN) standards.
- Enters required patient data into the computer connects electrocardiograph (EKG) and pulse oximeter monitors. Provides physical and psychological comfort to patients prior to during and post-procedure.
- Monitors electrocardiograph (ECG) blood pressure and other hemodynamic parameters during procedure in the Cardiac Catherization Laboratory (CCL).
- Assists with intra-aortic balloon pump (IABP) other cardiac assist devices and sets-up/removes arterial and venous lines as needed in the CCL CCU and ICU. Draws arterial blood gases (ABG) as requested by physician. Performs activated coagulation time tests to determine appropriate arterial/venous sheaths removal. Accompanies and monitors patient during transports.
- Prepares/cleans arranges and stocks room/equipment for next procedure. Maintains and stocks inventory such as catheters defibrillators monitors and temporary pacemakers. Provides monitors/external pacemakers to various locations within the hospital.
- Document required data prior to during and post-procedure and enters appropriate codes/charges/equipment used into computer for statistical/billing reports.
- Discharges/transports patients from procedure room. Communicates/instructs patient regarding post procedure site care instructions and precautions as appropriate.
- Provides patient's family/significant others with information related to procedures according to departmental policy and procedures.
- Participates/responds to post-cardiac catheterization site bleeding hematomas pain loss of distal pulse etc. as appropriate and documents findings and resolution.
- Participates in the orientation training and inservices of other/new personnel as defined by CCL manager and departmental educator.
- Administers contrast at the direction of the physician while the physician is in the room directing the administration and dosage.
Minimal Qualifications
Education
- High School Diploma or GED including completion of a Cardiovascular Technologist training program and/or related college level education in basic sciences. required
Experience
- Experience in cardiovascular laboratory procedures particularly as relates to cardiac and vascular interventional procedures preferred
Licenses and Certifications
- RCIS - Registered Cardiovascular Invasive Specialist with Cardiovascular Credentialing International (CCI) within 1 Year required or
- R.T.(R)(CI) - Registered Technologist in Cardiac-Interventional Radiography within 1 Year required
- CPR - Cardiac Pulmonary Resuscitation (includes BLS and NRP) for healthcare providers from either the American Heart Association (AHA) or American Red Cross within 90 Days required
- Additional unit/specialty certifications may vary by department or business unit.
- Health Services\ACLS required
Knowledge Skills and Abilities
- May require the use of specialized medical equipment (i.e. EEG EKG blood analyzer) or data processing equipment (i.e. tape drives consoles).
Calgon Carbon | A Kuraray Company is growing - and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world.
Position: Blaster
Location: Neville Island Equipment and Assembly facility - Pittsburgh, PA
$24.38 to start with a wage step progression plan
Eligibility to receive a $500 new hire retention bonus after 9-months
Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) – Generous Company Match!
Perks: Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities.
Under the direction of the Production Supervisor or Group Leader, the Blaster will perform tasks as necessary in the fabrication and maintenance of Calgon Carbon Corporation products and equipment. The worker will perform all assigned duties in compliance with all company and safety policies and procedures.
Duties and Responsibilities (not limited to)
- Abrasive blasts interior and exterior of tanks and piping systems to achieve the specified SSPC surface cleanliness and surface profile
- Assists sprayers as required
- Inspects interior and exterior lining and coating systems on purchased and produced equipment
- Coatings include but are not limited to:Plasite4110, 4006,Ceilcote242, epoxy, polyurethane-based coatings
- Prepares equipment for painting and coating by cleaning, solvent wiping, taping and papering prior to painting
- Mixes paint and linings in accordance with manufacturer’s instructions
- Visually inspects own work for defects and noncompliance to specifications and makes necessary repairs
- Inspections will include both surface preparation and finished coatings
- Surface preparation verification in accordance with SSPC for cleanliness and surface profile
- Coating inspection will include dry film thickness gage use, holiday or spark testing
- Complete inspection result documentation.
- Ambient condition monitoring and reporting
- Wet bulb and dry bulb temperature, relative humidity and surface temperature to ensure application requirement compliance
- Operate fork trucks and overhead cranes while moving equipment in and out of paint booth
- Assist in other areas with various tasks as required.
- Comply with company policies
- Blasting
- Labor/Assist paint
Qualifications
- Must be able to work a 3 shift rotation
- Less than high school education is required
- 0-2 years general labor experience is required
- Sand blasting experience is preferred
About Calgon Carbon
At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we’ve been at the forefront of developing cutting-edge technologies and solutions to meet the world’s evolving air and water purification needs.
Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron.
In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe.
Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran
Compensation details: 24.38-24.38 Hourly Wage
PI19a8c0edf461-37344-39850972
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact our Talent Specialist, Hari, at (224) 507-1278 .
Title
- Mechanical Drafting/CAD Technician II Duration: 12 Months (with potential for contract extension based on performance and CAD team needs) Location: On-site at Concord, NC (Hybrid schedule possible after fully trained) Work Environment: A hybrid work schedule is available, although significant time will be required to set it up (approx.
1 2 days onsite weekly depending on project needs).
Monday
- Friday, 8 am-5 pm base schedule High in-plant presence during the first 1 2 months (approx.
4 days/week).
Work Mode Onsite Hybrid o Heavy onsite work at the beginning (hands-on measurement and equipment familiarization).
o Hybrid flexibility later during modeling phases.
Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: As a member of the Downstream Platforms and Technology department, you will lead the drafting activities for a development program, creating, documenting, and managing electronic drawing files (Autodesk Inventor and AutoCAD) for custom-designed process equipment located in numerous worldwide Client Optical Fiber and Cable manufacturing locations.
In this role, you will take ownership of preliminary mechanical drawing packages from Engineering/Development and integrate them across multiple equipment configurations while maintaining equipment standardization and company drafting standards.
Complete all drafting work required for each drawing set before release into Autodesk Vault.
Drafting tasks include creating 3D models and associated drawings, as well as revising existing models and drawings, in accordance with company drafting standards.
Typical deliverables include detail, sheet metal, weldment, and assembly drawings.
Design mounting systems and layouts for mechanical, electrical, and pneumatic components, ensuring proper serviceability, usability, and integration within the overall system.
On-site presence is required to document existing system configurations on the production floor.
Hands on skills are desired to capture measurements, identify components, and develop an understanding of basic system functions Key Responsibilities: Create 2D drawings from existing 3D models.
Create 3D models of new components.
Collect data from engineering teams and incorporate information into appropriate drawings Collect measurements/information from the production floor to incorporate into drawings Submit drawing packages to be released through the Engineering Change Request (ECR) process.
Ensure all drawing packages comply with industry standards and safety regulations.
Required Education: Candidates should possess one of the following, but other technical degrees with demonstrated skills in drafting will be considered: A.A.S.
Mechanical Engineering Technology degree A.O.S.
Drafting/CAD degree Drafting Certificate/Certification Candidates without degrees must demonstrate proficiency in 2D and 3D drafting.
Required Experience and Skills: Minimum of 2 years of professional experience in the mechanical drafting field Working knowledge of ASME/ANSI drafting standards General Windows-based computer skills Proficient in the use of Autodesk Inventor and Autodesk Vault software Able to adapt to company standards and guidelines Ability to use basic measurement tools Strong work ethic Strong attention to detail Creative thinking Ability to safely operate and perform assigned tasks within a production environment Top 3 Required Skills 1.
Strong 2D Mechanical Drafting Experience o AutoCAD or Autodesk Inventor preferred.
o Must follow rigid industry and internal drafting standards.
2.
3D Modeling Experience o Any platform acceptable (SolidWorks, Inventor, etc.).
o Must model new components, modify brackets, hole spacing, layouts, etc.
3.
Hands-On Production Floor Experience o Ability to work safely on the production floor.
o Must use calipers, micrometers, tape measures to capture measurements directly from equipment.
o Confident interacting with technicians and operators.
Nice-to-Have Skills Experience with equipment teardown, mechanical troubleshooting, or hands-on mechanical hobby work (e.g., 3D printing).
Familiarity with Autodesk Vault or similar drawing release systems.
Creative technical thinking and ability to work independently.
Portfolio of start-to-finish drafting packages.
Interview Process Round 1: 30 minute phone/video screen with: o Hiring Manager o Possibly with supervisor o CAD Technician leader (to assess CAD capability) Round 2: Quick in person meeting (onsite or lunch).
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Autodesk Inventor, Autodesk Vault software, 2D drafting, ASME/ANSI, 3D drafting
Position Overview: The Production Technician is responsible for a wide range of skills including: wire, assemble, fit and mount sub-assemblies, components, and standard fixed assemblies in electrical control equipment.
Perform assembly required for test preparation and final inspection.
Use established power checking procedures and equipment to verify electrical/mechanical integrity of units assembled.
Perform all assignments within acceptable quantity and perfect quality requirements in keeping within assigned functions.
Making what matters work at
*** takes the passion of every employee around the world.
We create an environment where creativity, invention and discovery become reality, each and every day.
Its where bold, bright professionals like you can reach your full potentialand where you can help us reach ours.
Essential Functions: In this role, you will: Assemble panelboards and/or switchboards to customer specification based on electrical drawings, manufacturing schematics, and work instructions with the use of hand and power tools.
Inspect and test finished products to maintain quality standards and ensure conformance with specifications and codes.
Use various tools, such as wire strippers and plyers to perform the electrical wiring assembly of panelboards and/or switchboards.
Maintain expected progress of jobs in the area of assignment and communicate problem areas or part shortages.
Receive and put away material; prepare finished products for shipment.
Perform Lean Initiatives by recommending suggestions for improvement related to quality, work processes, and environmental safety and health.
Maintain equipment, tools, and work area per established 5S guidelines.
Cross-train and flex across functions based on development and business needs.
Perform other duties as assigned.
Basic Qualifications: Minimum one year of experience in an assembly related role with the use of hand and/or power tools (experience in automotive repairs, construction, carpentry, or other assembly type environments will be considered).
Preferred Qualifications: High school diploma or GED equivalent from an accredited institution.
CNC bus fabrication, press brake, or related experience.
Experience with wiring diagrams, schematics, and power flow to install correct wires.
Experience with measuring tools, torque tolerance, and hardware assembly.
Experience using various tools including: manual/electric tools, drill press, press brake, fork truck, jib crane, template/fixtures, hand carts, tape measure, storage/packaging materials and prescribed safety equipment.
Position Criteria: Must be able to interact and contribute in a small team environment and ability to flex according to production demands.
Lift 35lbs.
on a regular basis.
Must be able to work overtime as required.
Must be able to communicate effectively in all written and verbal formats (speech, writing, reading).
Ability to follow manufacturing drawings and instructions.
Keep yourself and teammates aware of health and safety practices and activities by actively observing fellow employee work practices and incorporating safety.
Actively participate in health and safety training and demonstrate competency based on training received.
Attend and actively participate in site meetings and trainings.
Work in a team environment.
Assemble and pack product.
Spin welder, handle welder, swivel lid assembly machines, carton-taping machine, lid snapper.
Accurately read routings and inform supervisor if there are errors.
Accurately enter order information in computer.
Perform quality checks.
Perform packing duties Properly dispose rejected material.
Assist with training new TeamMates.
Perform other duties as assigned.
Qualifications • Good reading and comprehension skills.
• Adequate communication skills.
• Ability to work with little supervision.
• Differentiate colors / color codes.
Operating automated samples board assembly line Verify the parts required prior to assembly Understanding of the assembly processes Work in a team environment Operate assigned production station on the assembly line using production equipment Perform a variety of assembly operations Vary depending on product assembly instruction.
- US Battle Creek, MI 12 Months Must be able to work both shifts: 1st Shift:5:45am 2:00pm & 3rd Shift:9:45 pm 6:00 am Steel toe shoes needed Description: Top Requirement: Manufacturing background preferred but not required.
Primary duties includes: Safely performing a wide range of tasks that includes stacking product, conducting quality checks, material set-up, and maintaining a clean and organized workspace.
The ideal candidate will have a strong commitment to working safe, demonstrated ability to work in a fast-paced environment, a strong desire to learn manufacturing processes and operating complex machinery and have a desire to advance within the company.
How you will impact client: Contribute to a collaborative safety culture that drives results.
Utilize problem solving skills, to maintain seamless production.
Provide quality products to ensure an exceptional customer service experience.
What you need to succeed: Manufacturing experience (preferred) however not required
- full training provided.
Ability to operate various manufacturing equipment, follow specific direction, operate power hand tools, and other duties as assigned.
Maintain a clean work environment.
- Ability to read a tape measure, basic math, and computer skills.
Ability to work safely and comply with all safety regulations.
- Ability to lift, push or pull 50lbs, navigate stairs, stand, walk, bend, and kneel throughout the entire shift.
Required to work daily overtime, weekend work and various shifts depending on position.
Military training and or Technical School preferred.
You will be responsible for comparing data with source documents in verification format to detect errors.
Additional responsibilities will include: Compiling, sorting, and verifying the accuracy of information before it is entered Locating and correcting errors or reporting them to supervisor Maintaining logs of activities and completed work Selecting materials needed to complete work assignments Storing completed documents in appropriate locations Operating a data entry device to record or verify a variety of information Inputting alphabetic and numeric information on keyboard according to screen format Handling phone interactions with clients for support and troubleshooting Data Entry Clerk Job requirements In the Data Entry Clerk role, you must be able to multitask and pay exceptional attention to details.
We are seeking a dedicated individual with excellent customer service and communication skills.
You must be able to work independently, learn quickly, and exercise sound judgment.
At least 1 – 2 years of Data Entry or Order Entry experience Accurate 10-key typing skills – 8000+ Bilingual Spanish language skills, a plus Intermediate MS Word, Excel, and Internet research skills Understanding of customer service protocols Strong phone presence Data Entry Clerk Benefits PrideStaff wants you to Succeed! We offer the Support you need along the way! Over the years, we have helped tens of thousands of people find outstanding career growth opportunities.
At PrideStaff, we truly value people, and we are dedicated to getting to know you and advocating on your behalf with our network employers across the country.
Our Recruiters will help guide you with career tools and resources.
We are pleased to offer a comprehensive benefits package to our Field Associates that provides peace of mind as you live and work.
Benefits package as a placed Field Associate include: Medical, Rx, and Wellness Benefits Dental and Vision Plan Options Short-term Disability 401(k) Retirement Plan Holiday Pay Data Entry Clerk
Help create some of this year's brand-new shows, attractions and events. Do you have previous experience and are looking to continue using your skills in an amusement park setting? Now is your chance to do just that by becoming a Live Shows Technician with Carowinds Live Entertainment Department.
Technicians with audio, lighting, networking and show control backgrounds.
Audio Engineers with troubleshooting skills, understanding of signal flow in live mixing; knowledge of QLab playback and show control as well as digital sound consoles such as Mackie and Allen+Heath are a plus.
Master Electricians to oversee and maintain designated show rigs and control systems. Must be capable of troubleshooting equipment and software problems at a moment's notice. Knowledge of conventional and moving lighting fixtures, DMX addressing and ETC Consoles are a must. Knowledge of Video Walls, Pixel/LED tape and Power Distro Racks are a plus.
Operate a variety of equipment, as assigned, such as golf carts, forklifts, scissor lifts, boom lifts, construction equipment, and motor vehicles.
Work individually or in a team setting.
Some of our amazing perks and benefits:
~ FREE admission to Carowinds and other Cedar Fair parks!
~ FREE tickets for friends and family!
~10% discounts on food and 20% discounts on merchandise!
~ Work with people from here, near, and from all over the world!
~ Exclusive associate-only events!
~ Paid training and FREE uniforms!
Positions are currently available for those who are 18 or older.
Responsibilities:
We are here to make people happy!! Carowinds associates are enthusiastic about their work because they create fun and memories to last lifetime! They are crucial to providing guests with a variety of engaging activities that reflect and uphold our core values of Integrity, Courtesy, and Inclusiveness.
Qualifications:
You!
Must have worked on several previous productions in a fully equipped theater, or similar experience.
Valid Driver's License
People who love helping others and will support the needs of our guests and associates.
Good judgement and a commitment to safety.
Ability to work and interact with people from diverse backgrounds.
Individuals with a passion and excitement about Carowinds.
Availability to include some weekdays, weekends, evenings, and holidays.
Are you looking to learn a new skill? Figeac Aero North America is a leading aerospace partner for detailed parts and sub-assemblies with specialization in saturation shot peening, shot peen forming, chemical processing, painting, assembly, non-destructive testing, and machining.
At Figeac Aero North America, we place a high value on our employees. Employees are given the opportunity to be a part of something special while achieving their career goals. We offer competitive compensation in addition to an attractive benefits package for qualified employees.
Employee Type: Full Time, Hourly
Reports To: Processing Manager
Job Location: Wichita, KS, USA
Shifts Available:
- 1st Shift, 6:00am - 2:30pm (Mon-Fri)
- 2nd Shift, 2:00pm - 10:30pm (Mon-Fri)
Pay Rate: $20.00 - $30.00/hr - dependent upon experience
Experience: 2-5+ year's aircraft manufacturing experience required
Job Duties:
- Working closely and train with current Shot Peen Forming leads
- Sets up and operates manual shot-peening equipment to shallow form improve stress tolerance of flight vehicle metal surfaces, according to specifications
- Reads interprets blueprints, sketches, work orders and other documentation to define layout of specific areas to be shot-peened, sequence of operations and finish specifications
- Lays out & marks areas to be shot-peened on test specimen or part, using measuring marking instruments, or fits template over part, scribes pattern and peels away masking compound to expose areas to be treated
- Mounts part on jig, rotary table, or on tooling form
- Fills hopper with specific size type shot
- Sets up, operates, and adjusts shot-peening equipment to achieve specified contour on test specimen or part
- Measures and checks test specimen or part to verify conformance to specifications to define required equipment adjustments, using measuring instruments, templates, and fixtures
- Records data on equipment settings and adjustments, like feed rate, nozzle angles and oscillation, number and size of nozzles required, shot size, and air or vacuum pressure settings, to be used for subsequent operation to develop numerical control programming data
- Loads control media, like computer tape, in control console of equipment, or enters commands to retrieve control instructions from computer data base to operate equipment automatically
- Observes operation of equipment to detect malfunctions
- Peels masking material from completed part, and cleans part with solutions to remove adhering scale
Requirements:
- Must be willing and open to learn a new skill and work closely with Lead Formers
- Must be dependable, team-oriented, and good communication skills
- Excellent attendance & positive attitude is required
- 2-5+ year's aircraft manufacturing experience required
- Must have reliable/dependable transportation
- Must be able to read, analyze, and interpret blueprints, and general procedures.
- Must be able to interpret and understand OEM specifications
- Ability to learn how to use measuring equipment (e.g. micrometers, calipers, height gages, Isoscope etc.)
- High School diploma or equivalent required
- Shot Peen Manual Saturation experience preferred, but not required
- Must be able to read, write, speak English language fluently
- This position is NOT eligible for VISA sponsorship
- Must be a US Citizen or current green card holder.
Working Conditions:
- Shifts Available:
- 1st Shift, 6:00am - 2:30pm (Mon-Fri)
- 2nd Shift, 2:00pm - 10:30pm (Mon-Fri)
- Some overtime may be required
- Will be exposed to constant activity that requires intermittent standing, bending, crouching, twisting, pushing, pulling, lifting, moving, and carrying light and heavy loads. The essential duties job may require the ability to stoop; to reach; to stand, to walk and sit for extended periods of time; to push and/or pull objects weighing up to 30 pounds; to lift and carry objects weighing up to 50 pounds; to use finger dexterity to operate a computer and other office equipment and hand strength to grasp files and other objects; to perceive the attributes of objects by touch; to hear and verbally exchange ideas and information with the public, staff and others on the phone and in the office. Frequently being on foot, bending, stooping, squatting, kneeling, climb stairs and kneeling and/or crouch to retrieve files and other items. Requires manual dexterity sufficient to operate small power tools and other equipment. Writing to complete reports and quality requests. Occasionally lifting and carrying (with assistance) items weighing 75-150 lbs. Must be able to wear safety PPE equipment, as required. Exposure to hot and cold work environments. Noise levels will require hearing protection.
Competitive Benefits:
- Fantastic Medical, Dental & Vision Insurance with competitive rates
- Great Ancillary benefits such as individual and family YMCA memberships & Pet Insurance
- Two weeks of vacation for newly hired employees
- Generous 401(k) plan that includes employer matching funds after 90 days of employment
- Basic Life, AD&D and short term disability coverage provided at no cost
- Employee Assistance Program, including up to 6 free counseling sessions
- And more!
Figeac Aero North America is an Equal Opportunity Employer. Figeac Aero North America provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
Position Overview: This position is Responsible for fitting and welding of steel, aluminum and stainless-steel parts using a MIG process.
Also required to perform other miscellaneous tasks, as assigned by supervisor.
Essential Responsibilities: Set up welding machines based on the job at hand or using a Welding procedure specification.
Read and interpret blueprints and/or drawings to determine the specific welding requirements.
MIG weld steel, aluminum and stainless-steel components based on the specifications of the blueprints and/or drawings.
Inspect equipment as required to maintain proper function.
Follow, create, and help maintain Welding Procedure Specifications.
Operate machinery used in the production process or assist machine operators.
Assemble items as instructed by superintendent.
Complete housekeeping duties in assigned area daily and/or when required.
Follow all company rules and policies.
Provide a great level of attention to detail and focus on the given task.
Work with other employees to maximize productivity and efficiency.
Prepare product for shipment.
Lift raw materials, final products, and items packed for shipment, manually (up to 70 pounds), or using a hoist.
Uphold all safety rules, OSHA standards, and quality standards, applicable to the responsibilities above.
Requirements Minimum 3 years demonstrated experience in welding and fabrication using MIG or TIG practices.
Ability to read tape measure, calipers and angle gauges.
Ability to read and understand production assembly drawings, blueprints, specifications, and welding symbols.
Effective oral and written communication.
Strong Mechanical aptitude.
Education and Experience: High School Diploma, GED or equivalent education preferred.
Good Mathematical skills.
Knowledge of welding and fabrication of piping and structural steel assemblies.
Knowledge of machines and tools including their designs and uses.
Lane Enterprises is an Equal Opportunity Employer (EOE) PIebbd8-0654
$15 / hour
Help create some of this year's brand-new shows, attractions and events. Do you have previous experience and are looking to continue using your skills in an amusement park setting? Now is your chance to do just that by becoming a Live Shows Technician with Carowinds Live Entertainment Department.
- Technicians with audio, lighting, networking and show control backgrounds.
- Audio Engineers with troubleshooting skills, understanding of signal flow in live mixing; knowledge of QLab playback and show control as well as digital sound consoles such as Mackie and Allen+Heath are a plus.
- Master Electricians to oversee and maintain designated show rigs and control systems. Must be capable of troubleshooting equipment and software problems at a moment's notice. Knowledge of conventional and moving lighting fixtures, DMX addressing and ETC Consoles are a must. Knowledge of Video Walls, Pixel/LED tape and Power Distro Racks are a plus.
- Operate a variety of equipment, as assigned, such as golf carts, forklifts, scissor lifts, boom lifts, construction equipment, and motor vehicles.
- Work individually or in a team setting.
Some of our amazing perks and benefits:
- FREE admission to Carowinds and other Cedar Fair parks!
- FREE tickets for friends and family!
- 10% discounts on food and 20% discounts on merchandise!
- Work with people from here, near, and from all over the world!
- Exclusive associate-only events!
- Paid training and FREE uniforms!
Positions are currently available for those who are 18 or older.
Responsibilities:
We are here to make people happy!! Carowinds associates are enthusiastic about their work because they create fun and memories to last lifetime! They are crucial to providing guests with a variety of engaging activities that reflect and uphold our core values of Integrity, Courtesy, and Inclusiveness.
Qualifications:
- You!
- Must have worked on several previous productions in a fully equipped theater, or similar experience.
- Valid Driver's License
- People who love helping others and will support the needs of our guests and associates.
- Good judgement and a commitment to safety.
- Ability to work and interact with people from diverse backgrounds.
- Individuals with a passion and excitement about Carowinds.
- Availability to include some weekdays, weekends, evenings, and holidays.
$15 / hour
Help create some of this year's brand-new shows, attractions and events. Do you have previous experience and are looking to continue using your skills in an amusement park setting? Now is your chance to do just that by becoming a Live Shows Technician with Carowinds Live Entertainment Department.
- Technicians with audio, lighting, networking and show control backgrounds.
- Audio Engineers with troubleshooting skills, understanding of signal flow in live mixing; knowledge of QLab playback and show control as well as digital sound consoles such as Mackie and Allen+Heath are a plus.
- Master Electricians to oversee and maintain designated show rigs and control systems. Must be capable of troubleshooting equipment and software problems at a moment's notice. Knowledge of conventional and moving lighting fixtures, DMX addressing and ETC Consoles are a must. Knowledge of Video Walls, Pixel/LED tape and Power Distro Racks are a plus.
- Operate a variety of equipment, as assigned, such as golf carts, forklifts, scissor lifts, boom lifts, construction equipment, and motor vehicles.
- Work individually or in a team setting.
Some of our amazing perks and benefits:
- FREE admission to Carowinds and other Cedar Fair parks!
- FREE tickets for friends and family!
- 10% discounts on food and 20% discounts on merchandise!
- Work with people from here, near, and from all over the world!
- Exclusive associate-only events!
- Paid training and FREE uniforms!
Positions are currently available for those who are 18 or older.
Responsibilities:
We are here to make people happy!! Carowinds associates are enthusiastic about their work because they create fun and memories to last lifetime! They are crucial to providing guests with a variety of engaging activities that reflect and uphold our core values of Integrity, Courtesy, and Inclusiveness.
Qualifications:
- You!
- Must have worked on several previous productions in a fully equipped theater, or similar experience.
- Valid Driver's License
- People who love helping others and will support the needs of our guests and associates.
- Good judgement and a commitment to safety.
- Ability to work and interact with people from diverse backgrounds.
- Individuals with a passion and excitement about Carowinds.
- Availability to include some weekdays, weekends, evenings, and holidays.
