Power Design Jobs in Usa

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Effector Digital Products (EDP) department designs digital electronic circuit cards and electronic units which are supported from proposal through transition to production. Our systems are subject to environments ranging from the frigid, sub-zero vacuum of space to the blistering heat of the desert floor, to the high pressures of the ocean depths.

The Digital, RF and Power Team is seeking a Principal Digital Design Engineer with digital electronics design and analysis skills to join our team.

This position is 100% ONSITE in Tucson, Arizona.

What You Will Do

We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today's cutting-edge technology to design digital electronics circuits that implement missile guidance, video and digital signal processing. Our technology base includes high-speed digital electronics, configurable logic, and homogeneous / heterogeneous multiprocessor designs.

The Principal Digital Design Engineer is responsible for the design, analysis, simulation, test, and integration of digital electronic modules and/or CCAs for Missile applications. The candidate should be experienced in all aspects of circuit card design including:

• hardware designs with processors
• FPGAs
• memory
• industry interfaces, such as PCIe, Ethernet, I2C, SPI, and UART

Qualifications You Must Have

• Bachelor's Degree in Electrical Engineering, Computer Engineering or Electrical Engineering Technology.
• Minimum of 8 years of engineering digital circuit design experience to include at least 2 of the following:
  • Development and design of electronic circuit designs, multi-assembly system/unit design
  • Ability to take a design concept from the block diagram or requirements level to development of a complete hardware design, and verification via test and integration
  • Experience with PCB design process and expertise in tools used to design (schematic capture), analyze and simulate designs prior to hardware execution.
• The ability to obtain and maintain a US security clearance prior to the start date. U.S. citizenship is required as only U.S. citizen are eligible for a security clearance

Qualifications We Prefer

• Master's degree in Electrical Engineering
• Experience with embedded test techniques, design for test, design margin analysis and design for production for complex circuit card assemblies between 16 and 32 layers
• Experience using Mentor Graphics Design Creation (Siemens EDA) tools: DxDesigner, xDX Designer VX, and Xilinx (Zynq Ultrascale, Vivado, Atrix)
• Experience using PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)
• Constraint Editor System (CES)
• Experience with FPGA code development or software
• Experience leading a program transition from development to production
• Experience managing technical/schedule risks to identify cost reduction opportunities to meet assigned deadlines
• Experience with intellectual property generation (patents & publications)

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• This position offers relocation

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role:

Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: position is in beautiful Tucson, AZ. Tucson has a friendly, caring and laid-back atmosphere, combined with the innovation and energy of a metropolitan region and recognized as one of America's 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature's best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson's fantastic weather lets residents enjoy the outdoors year-round.

Tucson, AZ: ,-az-location

#LI-CV1

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.

Effector Guidance Electronics is responsible for designing RF and Microwave hardware, including transmitters, receivers, and exciters.  This includes design and test activities that span preliminary design to integration.  Products we develop support radar and datalink applications on a variety of tactical missile programs.  Critical to this role is designing for challenging mechanical constraints and extreme environments.

What You Will Do

• Design and development of transmitters, receivers or exciters

• Design of circuit card assemblies (CCAs) with RF or mixed signals

• Work in a lab to accomplish component characterization as well as module verification and integration

• Test and handle sensitive RF Hardware

• Schematic capture and RF routing

• Partner with interdisciplinary teams - power, digital, mechanical, etc.

Qualifications You Must Have

• Typically requires a Bachelors Degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience

Minimum of two years of prior relevant experience to include any combination of the following:

• RF design and fabrication

• RF test and troubleshoot

• Simulation of RF products

• Experience with any of the following tools: Mentor DX Designer or equivalent, High Frequency Structure Simulator (HFSS) or equivalent, SystemVue/Genesys or equivalent, Advanced Design System (ADS)

Qualifications We Prefer

- Technical background in some of the following areas:

• Cascade analysis and/or frequency planning

• Filter design and fabrication

• Circuit card assembly design and fabrication

• Testing or designing RF hybrid (chip and wire) technologies

• High speed data converter test/characterization

• High power RF design or test experience

• Scripting experience (MATLAB or Python)

- Working across domains on complex projects

- Ability to prepare documentation with minimal oversight

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

This position is 100% onsite in Hunstville, AL and is eligible for relocation assistance.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Radar Hardware Design Engineer, you will be a part of our Radar Engineering team. The Radar Engineering team is comprised of a small cross-functional team of motivated and experienced engineers; we're responsible for designing, building, and testing cutting-edge phased array radar systems from concept to certified product. We enjoy a culture of sharing information and collaboration. Phased array radar systems have historically been reserved for specialized applications, but we're making this technology affordable to enable Detect and Avoid for widespread commercial applications. This role will focus on new advanced operational modes. The passion for revolutionary technology to make aviation safer motivates us to come in every day.

Responsibilities

In your role as a Radar Design Engineer, you will be responsible for designing digital and analog circuits for our next-generation Radar system. You will be involved in all phases of development, from conception to production, tracing system-level requirements through to circuit-level design. You will drive the design and layout of a multi-processor with an FPGA on chip using DDR 4 memory, as well as designing switching and linear power supplies. The high-speed digital design is complemented by high-frequency analog and RF design up to 12GHz. You will own the schematic, layout, artwork generation and bring-up of hardware. You will be collaborating with the cross-functional teams, including mechanical and system engineering. You will be responsible for the certification of your design to DO-160, DO-254 design assurance and FCC certification. You will support radar system integration and testing in the engineering lab and on the aircraft.

Basic Success Criteria

• Electrical Engineering fundamentals, typically gained through a Bachelor's Degree of Science or Engineering in Mechanical, Electrical, Aerospace, or a related discipline

• 5+ years of professional hands-on experience with high-speed digital circuits, linear and switching power regulator circuits, PLL's, VGA, mixers etc.

• Ability to use Circuit simulators, Altium schematic capture and layout, and SPICE simulation software

• Ability to troubleshoot, find root cause, and resolve issues

• Experienced in using oscilloscopes, logic analyzers, spectrum analyzers and Vector Network Analyzers

Preferred Criteria

• Advanced Degree of Science or Electrical Engineering

• Experience developing system architectures and managing requirements for certification of Avionics

• Creative problem solver that can bring multiple disciplines together, with the ability to assess risk and make design and development decisions without all available data

• Experience integrating and troubleshooting various electronic sensors and components

• RF circuit design experience up to 12GHz

• DO-160 and DO-254 hardware design assurance experience

This position will be located at our facility in Mountain View, California.

Must be willing to travel 10% of the time.

The estimated salary range for this position is $190,000 to $250,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.

In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $190K - $250K

Delta Electronics (Americas) Ltd. is seeking a power electronics engineer with expertise in power semiconductor module packaging to join our advanced Milan M. Jovanović Power Electronics Lab, located in Research Triangle Park, NC. Through your motivation, creativity, and results-oriented attitude, you will help us to achieve our mission to provide innovative, clean and energy-efficient solutions for a better tomorrow.

In this role, you will have opportunity to develop and verify your ideas to improve the performance of next generation power semiconductor modules in a variety of applications, including but not limited to on-board charging converters, EV traction inverters, charging stations, wind and solar inverters, and energy storage. You will have the opportunity to collaborate with other teams worldwide, interact with suppliers, attend conferences and publish your research work in technical venues.

Power Electronics Packaging Engineer:

Responsibilities

· Propose new concepts to enhance power semiconductor module electrical and thermal performances

· Design, build and verify selected new package concepts and technologies using state-of-the-art multi-physics simulation tools

· Research new approaches to improve the following aspects in the power modules: parasitic components, e-field distribution, insulation, partial discharge, thermal performance, die attach, interconnects, mechanical fatigue, etc…

· Translate application requirements into power semiconductor module specifications

· Interact with chip makers and material suppliers

· Build and maintain technical competency in power electronics packaging technologies

Skills and Experience

You should demonstrate knowledge, understanding and experience with the following topics:

· Standard industry power module technologies

· New packaging technology trends, including but not limited to substrates, die attach, interconnects, encapsulation, insulation, direct cooling, etc

· Power electronics packaging materials and characteristics

· Power electronics concepts (topologies, building blocks, parasitic effects, EMI, losses, partial discharge, etc…)

· Power semiconductor devices (SiC MOSFETS, SiC diodes, Si IGBTs, etc)

· ANSYS simulation (Maxwell, Q3D, etc)

· CAD and CFD simulation tools (SolidWorks, Flotherm, etc…)

· Cost tradeoffs, mechanical tolerances, manufacturability, etc

· Manufacturing process for molding, soldering, wire bonding, sintering, encapsulation, etc…

· Power module failure modes and reliability

Qualifications

· M.S. or Ph.D. degree in Electrical Engineering

· Junior and senior applicants welcome

· Candidates should possess excellent analytical, organizational, interpersonal, and communication skills. You must be self-motivated and able to work independently as well as a member of a team

Job Description

LeadStack Inc. is an award winning, one of the nation's fastest growing, certified minority owned (MBE) staffing services provider of contingent workforce. As a recognized industry leader in contingent workforce solutions and Certified as a Great Place to Work, we're proud to partner with some of the most admired Fortune 500 brands in the world.

Senior RTL Design Engineer

Location: Onsite – Folsom, CA

Duration: 6+ months

Hours: 40 hours/week

Pay Range :$90-$95/hr on W2

About the role

Our client is looking for a seasoned Senior RTL Design Engineer to drive architecture, RTL design, and FPGA-based validation for next‑generation high‑speed networking and storage solutions. This role is fully onsite in Folsom, CA.

Key responsibilities

• Define block‑level architecture and microarchitecture features for complex digital designs.
• Create prototypes, develop and simulate RTL models, and derive system requirements.
• Architect and implement multi‑FPGA partitioning solutions for large designs.
• Design, integrate, and debug high‑speed interfaces (Ethernet, PCIe, DDR).
• Apply advanced RTL implementation techniques to meet power, performance, and area (PPA) targets in collaboration with physical design teams.
• Own the FPGA lifecycle: uArchitecture → RTL Design → Physical Implementation → Timing Closure → Simulation Validation → Lab‑based silicon validation.
• Perform trade‑off analysis across cost, size, power, performance, and feature set to optimize customer experience and silicon resources.

Must‑have qualifications

• BE/BS/MS/PhD in Electrical Engineering, Computer Engineering, or Computer Science.
• 10+ years of hands‑on experience in digital architecture and RTL design.
• Strong FPGA RTL development background using VHDL and/or Verilog, including simulation, debug, and static timing analysis.
• Proven experience with RoCEv2 (RDMA over Converged Ethernet): RDMA READ/WRITE, Queue Pair (QP) management, congestion control.
• Solid experience with NVMe‑oF RTL development enabling direct data transfer between host memory and storage targets.
• Deep expertise with high‑speed serial interfaces, especially:
• PCIe Gen4/Gen5/Gen6
• 100G/200G/400G Ethernet MAC/PCS
• Demonstrated ability to debug complex FPGA and silicon issues in lab environments.

Soft skills

• Self‑motivated, independent problem solver who can drive tasks from concept to closure.
• Strong team player who is collaborative, builds relationships across functions, and communicates clearly.
• Innovative and adaptable, comfortable exploring new ideas and working in a fast‑changing environment.

know more about current opportunities at LeadStack , please visit us on Should you have any questions, feel free to call me on (513) 3184502 or send an email on

This is more than just a modeling job—it is your gateway to becoming a specialist in Advanced Semiconductor Chemical & Gas Delivery Systems. While you contribute your 1-2 years of site experience, we will provide the platform for you to master the complex logic behind high-purity piping, automated delivery, and international safety codes. You will transition from "building models" to "designing critical infrastructure" for the world's leading tech fabs.

General Responsibilities:

• Architectural & System Modeling: Develop and prepare high-precision 3D architectural and MEP designs using Revit and AutoCAD.
• Integrated Coordination: Collaborate with engineers and PMs to ensure design accuracy, ensuring all process requirements are met.
• Design Evolution: Proactively review and update models to reflect real-time design changes and field adjustments.
• Conflict Resolution: Perform Clash Detection and lead the reporting/solving of spatial discrepancies to ensure a seamless build.
• Team Leadership: Participate in technical meetings and provide progress updates to stakeholders.

Specialized Knowledge & Growth

• P&ID Translation: Read and interpret P&IDs/PFDs (Piping and Instrumentation Diagrams) to align 3D models with functional process logic.
• Subcontractor Management: Act as the technical bridge, communicating 3D model requirements to subcontractors for onsite coordination.
• Advanced System Learning: Gain deep-dive knowledge in Chemical Delivery Systems (CDS) and Gas Delivery Systems (BDS) specifically for advanced semiconductor nodes.

Qualification:

• Minimum Associate Degree in a related engineering or architectural field.

Must Have:

• Software Mastery: Proficiency in BIM software (Revit) and AutoCAD.
• Industry Experience: 1–2 years of experience in design-related work, preferably within the semiconductor or high-tech

Nice to Have:

• Process Piping: Experience with specialized materials like CPVC/PFA, SUS/PFA, and SUS/SUS piping design.
• Electrical & Control: Knowledge of Power/Control system design, including Tray, Conduit, and RSG layouts.
• Standards & Codes: Familiarity with NEC or ASME codes is a significant plus.
• Project Context: Previous involvement in Gas/Chemical-related projects.

What You Will Learn & Achieve

• Semiconductor Expertise: Master the design logic of supply systems that power the world's most advanced chip manufacturing.
• Professional Elevation: Move beyond 3D modeling into Digital Engineering, learning how to manage complex data within a BIM environment.
• Cross-Domain Skills: Gain exposure to mechanical, chemical, and electrical integration, making you a highly versatile asset in the global semiconductor talent market.

Quantitative Power Markets Analyst

Job Description

We are seeking a highly capable Quantitative Power Markets Analyst to join our team at a utility-scale renewable energy Independent Power Producer (IPP) focused on the development, ownership, and operation of solar PV and battery energy storage systems (BESS).

In this role, you will work closely with traders, engineers, and data scientists to design and deploy market-driven models and analytical tools that inform energy dispatch, bidding, and trading decisions. You will play a key role in real-time market analysis and strategy execution, helping to optimize the performance and revenue of a growing solar and storage portfolio across competitive power markets.

This position is well suited to a quantitatively strong analyst with sound power market intuition who is motivated to apply advanced analytics to real-world trading, dispatch, and asset optimization challenges in fast-moving electricity markets.

Qualifications

Required

• Bachelor’s degree or higher in Electrical Engineering, Economics, Operations Research, Applied Mathematics, Data Science, or a related quantitative field.
• 2+ years of experience in power market analysis, trading support, or quantitative analyst roles.
• Strong understanding of U.S. electricity market structures and mechanics; hands-on experience with ERCOT or CAISO market data is a plus.
• Proficiency in Python for data analysis, modeling, and workflow automation.
• Solid grounding in statistics, time-series analysis, and power market economics.
• Experience working with large-scale market datasets, including prices, load, generation, outages, and congestion.
• Ability to independently tackle loosely defined analytical problems with minimal supervision.
• Strong communication skills, with the ability to clearly convey quantitative insights to traders, engineers, and non-technical stakeholders.
• Demonstrated interest in power markets, trading, and renewable energy systems.

Work-Style Requirements

• Comfortable operating in a fast-paced, market-driven trading environment.
• Able to prioritize effectively and respond quickly to time-sensitive market requests.
• Collaborative mindset with a willingness to work closely across trading, analytics, and operations teams.
• Strong sense of ownership and accountability for analytical outputs and decision support tools.
• Flexibility to work outside standard business hours when market conditions require.

Preferred

• Familiarity with optimization-based power flow models, energy storage dispatch, and market bidding strategies.
• Experience applying machine learning techniques (e.g., regression, tree-based models, neural networks) to power market or price forecasting problems.
• Exposure to deep learning frameworks such as PyTorch and scikit-learn.
• Experience with cloud-based data infrastructure, real-time data pipelines, or streaming market data workflows.

What We Offer

• Competitive compensation package.
• Comprehensive health benefits, flexible PTO, and ongoing professional development opportunities.
• The opportunity to grow your career through hands-on involvement with utility-scale solar and BESS assets, applying cutting-edge analytics, AI, and data engineering technologies in the renewable energy sector.

If this role is of interest please reach out to Simon Howard ( )

Program Manager - Power Distribution

Location: Dallas, TX (Remote)

Are you an experienced Program Manager looking to join a supportive, passionate team? We have an attractive opportunity for you!

ABOUT THIS OPPORTUNITY:

As the Program Manager, you will oversee program execution from start to finish, providing strategic direction, mentorship to project managers, and exceptional client relationship management. You'll collaborate with cross-functional teams, monitor KPIs, optimize workflows, and ensure projects are delivered on time, on budget, and to the highest standards.

This is not an Information Technology-related position. If you do not have experience managing power distribution engineering/design projects, you will likely not be considered for the position.

Note: This position can work remotely, but new hires will be required to come to our headquarters in Perrysburg, OH, for an initial 2-week in-person paid orientation and training period.

Responsibilities:

Project Leadership:

· Responsible for measuring and developing the project manager's abilities and effectiveness through KPI's and setting core competencies in accordance with corporate governance.

· Work closely with cross-functional teams to ensure smooth project implementation and customer satisfaction.

· Attend industry events, conferences, and networking opportunities to enhance the company's visibility.

· Serve as a mentor and coach to other project managers, offering guidance and support.

Program Planning and Strategy:

· Oversees project managers in the delivery of all program-related projects in accordance with the contractual agreement, scope, schedule, and budget of the project.

· Oversee the planning, scheduling, and execution of all phases of projects within the designated program in accordance with project management processes, policies, guidelines, and corporate governance.

· Develop and monitor high-level project workflows, validate project scopes, and collaborate on project priorities.

· Oversees the creation of proposals, kickoff meetings, and discovery calls.

Program Monitoring and Reporting:

· Prepare, review, and approve project change orders and/or correction actions in collaboration with the client, Project Engineer(s), and Operations Manager.

· Provide program cost forecasting over the life of the project or program.

Program Closure:

· Ensure the successful closure of the program, including finalizing all program activities, obtaining acceptance from stakeholders, and conducting post-program evaluations.

· Document lessons learned and share best practices with the organization.

Communication:

· Maintain clear and consistent communication with program stakeholders, including executive leadership, project managers, and cross-functional teams.

· Provide regular program updates to management and stakeholders.

· Resolve conflicts and facilitate effective communication within the program team.

· Liaises between project members, cross-functional teams, external vendors, and other stakeholders to ensure deliverables, requirements, schedules, cost, and meeting plans are communicated.

· Accountable for contractual correspondence and communication with all stakeholders, including identification and reporting of risks, liabilities, and opportunities.

Risk Management:

· Identify potential risks and issues that may impact project success and develop risk mitigation plans and contingency strategies. Monitor and manage risks throughout the project life cycle.

Budget Management:

· Manage Program level P&L reporting.

Customer/Client Relationship Management:

· Build and maintain strong relationships with existing clients, understanding their needs and providing exceptional service.

· Build relationships with Sr. Leadership within the customer organization.

· Build an understanding of the customer’s organizational structure and decision-making process.

· Identify and understand client challenges, propose solutions, and tailor product/service offerings accordingly.

· Conduct thorough market research to stay informed about industry trends, customer preferences, and competitor activities.

· Lead Program update calls and in-person meetings with external clients.

· Monitor and manage expectations of communication between staff and external clients.

· Develop and execute a strategic plan to identify and target new business opportunities in the market.

· Collaborate with the sales team to develop sales strategies, set targets, and achieve revenue goals.

· Prepare and deliver compelling presentations and proposals to potential customers.

· Negotiate contracts and terms of agreements with clients, ensuring a win-win outcome for both parties.

· Maintain accurate and up-to-date records of sales activities and client interactions in the CRM system.

· Keep abreast of the company's product/service offerings, updates, and enhancements.

· Other duties as assigned.

Competencies: Fit/Gap Analysis | Needs Analysis | Project Administration | Project Controls | Project Development | Project Estimation | Project Evaluation | Project Implementation | Project Lifecycle Management (PLM) | Project Management | Project Planning | Project Portfolio Management (PPM) | Project Scheduling | Project Status Reporting | Scope Management | Stakeholder Management | Project Management Software | Customer Satisfaction | Vendor Management | Contract Negotiation

WHAT WE'RE LOOKING FOR:

• Education Requirements – Bachelor’s of Science in Engineering/Engineering Technology or Bachelor's of Business Administration; or an equivalent combination of education and experience.
• Experience Requirements - A minimum of 7 years of experience in the Power Utility Industry with engineering, operations, and /or project management, including financial oversight and personnel development. And a minimum of 3 years of functional, or direct people management experience, with the proven ability to lead, motivate, and influence.
• Project Management Certification (PMP) or equivalent certification required.
• Proven experience in project management, with a track record of successfully delivering projects on time and on budget.
• Strong leadership, communication, and interpersonal skills, with the ability to manage multiple stakeholders with competing priorities.
• Must be results-driven with a dedicated focus on achieving successful project performance, customer satisfaction, and organic sales growth.
• Demonstrated a level of understanding of commonly used project management concepts, practices, and procedures.
• Adaptability and problem-solving abilities.
• Exceptional attention to detail and organizational skills.
• Available during the “core” work hours of 8:00 a.m. to 5:00 p.m. Evening and weekend work may be required as duties demand.
• Willing and able to travel regularly (30%+), which will include planned overnight travel
• Dependable transportation, a valid driver’s license, and insurance
• Able to pass a background check/drug test/driving record check.
• Authorized to work in the United States

Physical Requirements:

• Must be able to endure frequent, lengthy periods of sedentary work and sit for prolonged periods of time.
• Must be able to utilize a computer keyboard, computer monitor, and telephone for prolonged periods of time.
• Must have the physical ability to perform activities such as preparing and analyzing data and figures, transcribing notes, and viewing a computer terminal; these activities require close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
• Must have the physical ability to express or exchange ideas by means of the spoken word and convey detailed or important spoken instructions to other workers accurately, often in a group setting.
• Must have the ability to receive detailed information through oral communication, and to make discriminations in sound.

This job advertisement should not be interpreted as all-inclusive. It is intended to identify the major responsibilities and requirements of a job. The individual may be required to perform job-related responsibilities and tasks other than those stated in this advertisement. This advertisement does not constitute an employment agreement between Sigma and the employee and is subject to change by Sigma as the needs of the organization and/or the requirements of the function change.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and will not discriminate based on an employee’s race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any other classification protected by law.

PM22

PI4b47862f925

ABOUT THE COMPANY

Total Alloy Steel Service Company (TASSCO) is a leading distributor and fabricator of high-quality, wear-resistant products and services. At the heart of TASSCO’s mission is a genuine passion for “Making customers’ lives better” by providing reliable support to bulk material handling customers. We pride ourselves on offering technical expertise and value-driven, cost-effective solutions. Our commitment to service excellence and a can-do attitude enables us to build strong, enduring relationships and deliver exceptional support to our customers.

ABOUT THE ROLE

As a Senior Design Engineer at TASSCO, you will lead the design and execution of custom-engineered bulk material handling systems and components for abrasive environments. This role combines deep technical expertise in material flow, structural design, and wear mitigation with a hands-on, project-driven approach. You’ll own projects from concept to final implementation—ensuring system reliability, manufacturability, and cost-effectiveness.

You will collaborate closely with sales, operations, manufacturing, and field teams while leveraging tools such as AutoCAD Inventor and discrete element modeling (DEM) to optimize performance. Your designs will directly contribute to the success of capital and MRO projects across industries including mining, aggregates, power generation, and heavy industrial.

LOCATION: Birmingham, Alabama. Office hours: 7:30-4:30pm.

RESPONSIBILITIES

• Lead engineering design of custom bulk material handling systems including transfer chutes, towers, supports, and liners
• Apply DEM software and simulation data to enhance material flow and reduce wear
• Create detailed design packages including 3D models, BOMs, stress calculations, and manufacturing notes
• Specify structural reinforcements, wear-resistant materials, and overlay/fabrication techniques
• Interface with CNC, plasma cutting, forming, and welding processes to ensure manufacturability
• Coordinate closely with sales, estimating, shop, and field service teams throughout the design cycle
• Review customer bid packages and translate specifications into actionable engineering plans
• Mentor junior engineers and provide technical oversight on drafting, design standards, and QA processes
• Deliver complete design proposals including scope definition, system layout, and budget analysis

SUCCESS METRICS

First 3 Months: Learn TASSCO’s design standards, ERP workflows, materials, and key systems. Support ongoing projects with AutoCAD 3D layouts and fabrication drawings. Begin conducting DEM model reviews and participating in site visits

First 6 Months: Independently lead small-to-mid-size design projects and generate full drawing packages. Perform structural calculations and specify reinforcement and wear treatments. Incorporate DEM results into optimized designs and complete at least one full system

First Year: Deliver multiple large-scale designs with high accuracy and manufacturability. Lead capital and MRO project design scopes from concept to implementation. Mentor team members and propose improvements in materials or processes for performance gains

QUALIFICATIONS & EXPERIENCE

Education:

• Bachelor’s degree in Mechanical Engineering or a related field is required.

Experience:

• 8–10 years of engineering experience in mechanical or structural design, ideally within custom steel fabrication or heavy industrial systems.
• Proven background designing bulk material handling systems or other engineered-to-order capital equipment.

Certifications:

• Professional Engineer (PE) license is a strong plus but not required.

Technical Skills:

• Advanced proficiency with AutoCAD Inventor and 3D modeling.
• Hands-on experience with discrete element modeling (DEM) software for flow simulation.
• Strong knowledge of welding and fabrication techniques (e.g., overlay, hard-facing), CNC processes, and manufacturing constraints.
• Experience applying AWS, AISC, and OSHA standards to structural and welded assemblies.
• Familiarity with ERP systems and project tracking tools.

Core Competencies:

• System-level problem solving: Practical, optimized designs tailored for abrasive, high-wear environments.
• Project ownership: Able to manage design timelines, quality standards, and technical deliverables independently.
• Communication and collaboration: Effective at coordinating across departments and presenting technical ideas clearly.
• Initiative and learning agility: Stays current on tools, standards, and methods to drive technical excellence.
• Contract review: Ability to interpret technical requirements in customer documents and assess feasibility

HOW WE WORK – OUR CORE VALUES

Team Player:

• Loyal and committed to team success
• Collaborative and supportive
• Positive, humble, and solution-oriented

Do the Right Thing:

• Honest, respectful, and ethical
• Take initiative to deliver excellence
• Acts with integrity across all interactions

Continuous Development:

• Eager to grow personally and professionally
• Embrace feedback and new challenges
• Committed to excellence and technical curiosity
• Build great relationships

WHY JOIN US?

• Work on cutting-edge bulk material handling projects across heavy industry
• Lead full design scopes with autonomy and impact
• Gain exposure to DEM modeling, fabrication techniques, and field implementation
• Thrive in a collaborative culture that values innovation and continuous learning
• Join a highly profitable, growing company in niche steel plate fabrication industry

BENEFITS***

TASSCO offers a comprehensive benefits package including:

• Medical, Dental, & Vision Plans
• Company-paid Life and Disability Insurance
• 401(K) with company match
• Paid Vacation and Sick Leave, plus eight(8) paid company holidays

***Relocation assistance available for qualified candidates with relevant experience.

This is a unique opportunity for technically driven engineers to lead high-impact design initiatives in a dynamic and collaborative environment. If you’re passionate about solving complex mechanical challenges and delivering durable, performance-focused systems—we’d love to hear from you.

TASSCO is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, or any other characteristic protected by law.

A Senior Test Engineer job in Miramar, FL 33027 is currently available through Belcan at one of our key aerospace clients. This is a four‑month contract role with the potential to convert to a direct hire. To be considered for this role the candidate will need to have 3-5 years of relevant experience.

Description

The Test Design Engineer is responsible for creating and performing test automation activities consistent with the test lead and test development goals/objectives. This role requires knowledge/experience with automated test software, manufacturing test environment and the ability to interpret test requirements, implement requirement-based test methodologies and trouble shoot & debug test and product issues. Experience with FAA Part 145 in an MRO environment highly desired.

Job Duties:

Specific duties will include:

SW/HW debug, troubleshoot, upgrade and maintain product automated test equipment.

Requirements Analysis/Review for test-ability

Test procedure development, implementation, execution and failure root cause analysis.

Test planning and preparation.

Assess System performance against requirements

Develop code in Veristand, Teststand, LabVIEW to implement test GUIs, drivers and test requirements.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Perform sub-system testing from bench level CCA functional testing to system level burn in testing against an ATP/QTP.

Develop and refine system and board level test cases and procedures.

Trouble shoot subsystem and system level failures to root cause.

Design test fixtures & cables to enable testing.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Bench test CCAs and test electronic sub-assemblies and rack based test systems (instruments, cables and interfaces).

Trouble shoot subsystem and system level failures to root cause.

Gather, configure and use appropriate test equipment to perform task - Power supplies, DVM, Oscilloscope, electronic loads, custom cables, etc.

Interpret test requirements and electrical test results.

Read electrical schematics.

Test planning, preparation & execution

Required Qualifications:

3 to 5 years of experience

Strong interpersonal skills

Strong analytical skills

B.S. or M.S. in Electrical Engineering, Electrical Engineering Technology, or related discipline desired

Will consider equivalent years of relevant experience in lieu of a formal degree

Experience working with or developing Automated Test Equipment (ATE).

Experience in hardware and test equipment troubleshooting experience.

Knowledge of test automation (HIL) using National Instruments Labview, TestStand and Veristand

Can operate independently

Desired Skills:

Excellent verbal and written communication skills.

Experience working independently and in a collaborative environment

Ability to react to project adjustments and alterations promptly and efficiently

Ability to effectively prioritize and execute tasks in a high-pressure environment

Familiarity with electronic components and common electronic test equipment.

Experienced using lab test equipment, power supplies, DVM, Oscilloscope, electronic loads

Ability to interpret test requirements and electrical test results.

Ability to conduct detailed failure analysis and develop and implement root cause corrective actions.

Experience with GIT, Tortoise SVN, or equivalent software configuration management tools

Previous experience with CAN, UDS, RS232, RS422 & 1553 communication protocols.

Previous experience with programming languages such as C, C++ & C#.

Previous experience with Visual Studio.

Compensation:

This position is offering an salary rate of $52.88 - $62.50/hr, however, Belcan considers several factors when extending an offer, including but not limited to education, experience, geographic location, and discipline. Benefits offered may include health care, dental, vision, life insurance; 401(k); education assistance; paid time off including PTO, holidays, and any other paid leave required by law.

Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

About the Role & Team

Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.

Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.

Ride Development Engineering Design Assurance is an all-encompassing role that provides technical oversight and guidance in support of Ride project teams. As Ride engineering experts, they lead the way when it comes to process, standardization, and overall design compliance. Design Assurance Engineers work alongside our project teams to provide experience, knowledge, and expertise to help advance our projects.

This role will work with the Executive Ride Development Engineering.

This is a full-time role.

What You Will Do:

• Serve as Mechanical Subject Matter Expert (SME) in the Ride Engineering design review process to ensure that appropriate engineering/design standards, methods, analyses, and judgment are applied so the engineered products meet the design intent and the business imperatives of safety, reliability, and efficiency.

• Review designs related to Ride Engineering products and provide feedback to project teams and functional management regarding the acceptability of those designs.

• Interpret and develop standards and codes that will be utilized by the Ride Engineering organization.

• Advocate global consistency of solutions for similar problems, and compliance with Disney and external standards.

• Partner with Disney leadership and project teams to improve process and standards for the benefit of future engineering efforts.

• Contribute to mentoring and talent development

Required Qualifications & Skills

• Advanced engineering knowledge (e.g., statics, dynamics, kinematics, stress/strain/fatigue).

• Advanced engineering expertise (e.g., machine design, weldments, power train, materials).

• Proficiency with engineering tools (e.g., Solid Modeling, Building Information Modeling (BIM), 2D Modeling, FEA, Engineering calculation software e.g. Mathcad, Engineering programming and modeling software e.g. MatLab).

• Superior design sensibilities and creative problem solving.

• Excellent written & verbal communication skills.

• Ability to work collaboratively within a large and diverse team environment.

Preferred Qualifications & Skills

• Previous Disney or entertainment experience, with advanced knowledge of the industry.

• Extensive experience with life safety design/requirements.

• Experience with prototype, development, and/or innovative products.

Education

• Bachelor's Degree (B.S. or B.A.) in Engineering from an accredited college or university required. (Mechanical Engineering preferred)

Additional Information:

Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at  

#DXMedia

About the Role & Team

Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.

Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.

Ride Development Engineering Design Assurance is an all-encompassing role that provides technical oversight and guidance in support of Ride project teams. As Ride engineering experts, they lead the way when it comes to process, standardization, and overall design compliance. Design Assurance Engineers work alongside our project teams to provide experience, knowledge, and expertise to help advance our projects.

This role will work with the Executive Ride Development Engineering.

This is a full-time role.

What You Will Do:

• Serve as Mechanical Subject Matter Expert (SME) in the Ride Engineering design review process to ensure that appropriate engineering/design standards, methods, analyses, and judgment are applied so the engineered products meet the design intent and the business imperatives of safety, reliability, and efficiency.

• Review designs related to Ride Engineering products and provide feedback to project teams and functional management regarding the acceptability of those designs.

• Interpret and develop standards and codes that will be utilized by the Ride Engineering organization.

• Advocate global consistency of solutions for similar problems, and compliance with Disney and external standards.

• Partner with Disney leadership and project teams to improve process and standards for the benefit of future engineering efforts.

• Contribute to mentoring and talent development

Required Qualifications & Skills

• Advanced engineering knowledge (e.g., statics, dynamics, kinematics, stress/strain/fatigue).

• Advanced engineering expertise (e.g., machine design, weldments, power train, materials).

• Proficiency with engineering tools (e.g., Solid Modeling, Building Information Modeling (BIM), 2D Modeling, FEA, Engineering calculation software e.g. Mathcad, Engineering programming and modeling software e.g. MatLab).

• Superior design sensibilities and creative problem solving.

• Excellent written & verbal communication skills.

• Ability to work collaboratively within a large and diverse team environment.

Preferred Qualifications & Skills

• Previous Disney or entertainment experience, with advanced knowledge of the industry.

• Extensive experience with life safety design/requirements.

• Experience with prototype, development, and/or innovative products.

Education

• Bachelor's Degree (B.S. or B.A.) in Engineering from an accredited college or university required. (Mechanical Engineering preferred)

Additional Information:

Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at  

#DXMedia

HCLTech is looking for a highly talented and self- motivated Mechanical Design Engineer with CREO to join it in advancing the technological world through innovation and creativity.

Job Title: Mechanical Design Engineer with CREO

Job ID: 52988

Position Type: Full-time with HCLTech

Location: San Jose, California, United States

Role/Responsibilities

• Strong experience in sheet metal design (and / or plastic design), Electro-mechanical product design and good understanding of manufacturing processes

• Telecom equipment product design (enclosure design/electro-mechanical system design) experience is an added advantage

• Experience designing and producing Manufacturing documentation with GD&T and bi-lateral 1D, 2D & 3D tolerance methods for electronic enclosures using Creo Mechanical Design software

• Experience in designing products within process limits associated with press brake, stage and progressive hard tooling processes for Manufacturing Production

• Expertise with tolerance analysis, relevant safety standards, EMC/EMI design constraints, pcb layout requirements as it applies to the sheet metal enclosure

• Experience with using IDF data translation between ECAD software and Creo Mechanical Design Software

• Good communication skills and experience with Microsoft products for generating reports and other functional aspects

• Demonstrated knowledge and skills required to interact with other design disciplines, Hardware, Safety, EMC/EMI, SI and Manufacturing Engineers during the product development

• Proficient in various computer software tools such as Excel, MS Word, Power Point, and flow chart programs.

• Strong team player who can handle multiple projects and priorities with little direction from manager

• Excellent written and verbal communication skills (English)

Pay and Benefits

Pay Range Minimum: $43.61 per hour

Pay Range Maximum: $55.55 per hour

HCL is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to for investigation.

Compensation and Benefits

A candidate's pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year.

How You'll Grow

At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

To apply:

Email your resume and a cover letter walking us through why you're a great fit for this role alongside your background and interest in Trading Cards to

Location: Remote flexible (EST overlap preferred, in-person NYC ideal)

Compensation: competitive salary + meaningful equity

Department: Product Development

Reports to: CEO

About Rare Candy

Rare Candy is revolutionizing the $2B trading‐card industry as the only community marketplace 100% dedicated to TCGs. Collectors use our AI‐powered card scanner, data‐rich collection tools, and jaw‐dropping drops to buy, sell, and showcase Pokémon, MTG, Lorcana, One Piece, and more. We grew almost 30× last year and aren't slowing down—join us as we scale the definitive home for TCG enthusiasts.

The Role

We're looking for an envelope-pushing Product Design Lead who can deliver pixel-perfect designs, influence vision, and create obsessively fun experiences for die-hard fans. You'll own the end‐to‐end product experience—from discovery to polished UI—guiding features that delight collectors and dealers of all shapes and sizes. If you love crafting magnetic interfaces, going deep with passionate users, and building alongside product-conscious engineers, you'll thrive here. Bonus points if you're a designer-who-codes, loves using cutting-edge tools for prototyping and user research, and are a true trading card nerd at heart.

What Success Looks Like

• First 30 days: Audit current web & iOS experiences, get oriented on the roadmap for the next 90 days, then design and ship your first WAU-driving feature
• By end of month 3: Continue roadmapped feature work while establishing a scalable design system in Figma + code for our suite of social collecting apps (web, iOS, Android)
• By Month 6: Quadruple WAUs through category-defining collecting features

What You'll Do

• Help design Product Vision – Contribute to product strategy with the leadership group, translating collector insights into game-changing
• Lead & Execute Design – Own discovery, wireframes, prototypes, UI, motion, and polish for web (NextJS), iOS (SwiftUI), and Android (React Native)
• Build a Design System – Extend our baseline token system, with thoughtfully-structured components and documentation that enable engineers and future designers to move fast while maintaining our market lead on craft
• Champion User Research – Plan and run qualitative & quantitative studies to validate problems and solutions, then translate your findings into clear execution paths alongside the leadership team
• Collaborate Closely – Work shoulder‐to‐shoulder with product, growth, and engineering to ship every week, not every quarter
• Measure Impact – Build with behavioral metrics at the center of your process, iterating relentlessly based on data (not ego)

A Day in Your Life at Rare Candy

Morning: Soak up the release announcement for a new Pokémon set, scan out the latest posts in our feed, and get a pulse check on usage metrics over the last 24 hours.

Mid‐day: Join standup with your update on a new feature prototype for our card scanner — tag a front-end engineer for quick feedback.

Afternoon: start recruiting external testers for your prototype, wrapping up the day dogfooding the latest build of the app in TestFlight.

You Might Be a Fit If

• You've spent 5 + years designing consumer products and have experience guiding other designers
• Your portfolio demonstrates best-in-class product instincts, balancing polished aesthetics and user-backed decision-making with business requirements and impact
• You're in Figma (auto‐layout, variants), prototype tools (origami), code prototyping (Cursor, React), and AI-enhanced product work
• You're comfortable in fast-paced 1→100 environments, juggling scrappy experiments and pixel‐perfect craft without breaking a sweat
• You're data‐savvy: proposing and designing A/B tests, reading funnels, and balancing quant with qual as needed
• You're a thoughtful remote collaborator who knows when async, written, and live conversations is the right medium for the moment
• You have a genuine passion for the trading card hobby — adjacent fandoms are a huge plus too

Bonus Points

• From-scratch experience building a design system with Figma, Tailwind, Storybook, or similar
• Experience prototyping features and products with Cursor, Lovable, or Figma Make (in that order)
• Strength motion design, Lottie, or 3D interactions
• Past work in game design, marketplaces, social networks, or hobbyist communities

Why Join Us Now

• Shape the product and brand of a category-defining social collecting community
• Green‐field design system ownership — nothing legacy holding you back
• Work anywhere, collect everywhere: healthy remote culture + annual $1000 collecting stipend
• Ship fast with founders & engineers who celebrate wins (and rare pulls!)
• Equity upside in a well-funded growth-stage business

Our Hiring Process

• 30‐min intro chat with CEO & CTO Head of Engineering
• Portfolio deep‐dive + collaborative whiteboard exercise.
• Design Exercise
• Panel interview with Engineering, Product, and Marketing peers.
• Offer within 1 week of final interview.

Ready to level up collecting?

Email your resume, portfolio link, and a note about your favorite card art to with the subject line "Product Design Lead — Gotta Design 'Em All!"

Rare Candy celebrates individuality—from Pikachu collectors to Planeswalker pros—and is proud to be an equal‐opportunity employer.

Position: Technical Design Intern

Location: Apex, NC (On-site)

Department: Design

Reports to: Technical Design Manager

Mary Square is looking for a detail-oriented Technical Design Intern to join our rapidly growing team. The ideal candidate would describe themselves as a team player that is organized, efficient and passionate about technical design. This is a great opportunity for someone early in their design career who is eager to learn, grow, and contribute to creating beautiful apparel collections. The Technical Design Intern supports the technical design team in ensuring garments meet Mary Square’s fit, construction, and quality standards. This role will assist with measuring samples, preparing tech packs, organizing fit sessions, and maintaining technical documentation throughout the product development process.

This is a hands-on learning opportunity for someone interested in the technical side of apparel development, providing exposure to fit sessions, garment construction, and factory communication from concept through production.

• Assist the technical design team in preparing and updating technical specification (tech) packs.
• Support measuring samples and prototypes and help record measurements for fittings.
• Assist in preparing garments and documentation for fit sessions.
• Take notes during fittings and help update tech packs with fit comments and revisions.
• Help update "How to Measure" diagrams and construction details.
• Support organization and tracking of samples and development stages.
• Assist with maintaining spec sheets, measurement charts, and grading information.
• Work closely with the design and product development teams to ensure technical updates are documented accurately.
• Maintain organized digital and physical technical files for seasonal development.
• Support cross-functional communication with design, sourcing, and product development teams.

• Bachelor’s degree or current enrollment in Fashion Design, Apparel Design, Technical Design, or a related field.
• Coursework or experience in patternmaking, garment construction, or sewing.
• Basic understanding of garment fit, construction, and measurement techniques.
• Proficiency in Adobe Illustrator.
• Working knowledge of Microsoft Excel or Google Sheets.
• Strong organizational skills and attention to detail.
• Ability to learn quickly and adapt in a fast-paced environment.
• Strong communication skills and a collaborative mindset.
• A passion for apparel product development and technical design.

At Mary Square, we believe in the power of community, creativity, and celebration of life’s beautiful moments. Our lifestyle brand is committed to uplifting others through thoughtful products that inspire joy and confidence. We are a company that values faith, family, fun, and making a lasting impact on the lives of women everywhere.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Defense, Space & Security (BDS) organization is seeking a Design and Analysis Engineer to lead the development, integration, and validation of complex electronic and electrical sensor subsystems for the P-8 aircraft. This position reports to the P-8 Mission Systems IPT Sensors Systems team and will be 100% onsite in Tukwila, WA.

The P-8 is a high-visibility, advanced commercial derivative military aircraft program supporting the U.S. Navy and international customers. As a Technical Lead Engineer (TLE) for sensor subsystems (e.g., electro-optical/infrared, electronic warfare, magnetic, radar, signals intelligence, surveillance/identification), you will ensure that equipment is installed correctly, safe to operate, and performs properly during final product functional testing. You will oversee the subsystem lifecycle from design requirements and specifications through supplier technical management, hardware/software integration, systems testing, lab and aircraft integration, flight testing, certification support, and safe-to-fly determinations.

Position Responsibilities:

• Lead development and documentation of complex electronic and electrical system requirements.
• Translate requirements into system architecture, hardware/software designs, and interface specifications.
• Lead testing and validation efforts to ensure system designs meet operational and functional requirements.
• Oversee supplier performance monitoring to ensure system integration and compliance.
• Provide production build support including build verification and disposition of nonconformance.
• Lead troubleshooting during Installation and Check-Out and Production Acceptance Testing.
• Review supplier drawing changes impacting production and update obsolete parts or design improvements.
• Develop and maintain subsystem diagrams, schematics, and system description documentation.
• Manage critical supplier performance and maintain Source Control Drawing requirements.
• Collaborate with Supply Chain to formulate Requests for Information (RFI) for new equipment or long-lead items.
• Support project management activities including work statements, budgets, schedules, and reviews.
• Generate major proposal sections to support new business development.
• Develop and validate requirements for complex sensor systems and components.
• Define and conduct critical tests to validate sensor design performance.

This position will be 100% onsite in Tukwila, WA.

This position requires an Active US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.S. Secret clearance is required.

Basic Qualifications (Required Skills/Experience):

• For Expert Engineer: Minimum 9 years of experience in design, integration, and test of electrical systems.
• For Consultant Engineer: Minimum 14 years of experience in design, integration, and test of electrical systems.
• Bachelor’s, Master’s, or Doctorate degree in engineering, computer science, mathematics, physics, or chemistry from an accredited institution.
• An interim and/or final U.S. Secret clearance is required.

Preferred Qualifications (Desired Skills/Experience):

• Proven experience as a Technical Designer in aviation and aerospace.
• Experience with RF measurements including intermodulation distortion, phase noise, spurious measurement, and S-parameters.
• Proficiency with electronics lab instrumentation such as multiscope, TDR, signal/network analyzers, oscilloscopes, MIL-STD-1553B test tools, Agilent Fieldfox RF Test Set, fiber optics, and Ethernet.
• Experience with product configuration management.
• Knowledge of high frequency RF, digital, power, and analog test systems.
• Experience managing and leading engineering projects.
• Strong communication and collaboration skills with multi-discipline teams.
• Physical ability to lift test/cable equipment up to 35 lbs and navigate stairs.
• Flexibility to work varied hours or overtime to meet production and integration schedules.
• Familiarity with UNIX/Linux command line.
• Experience leading teams of Factory/Flightline/Lab Technicians in fault isolation and troubleshooting of electrical wire assemblies and military electronic LRUs.
• Ability to read and interpret wiring diagrams for aircraft connectors and wire bundles.
• Knowledge of manufacturing processes and MESci (Manufacturing Execution System Common Image).

Relocation:
Relocation assistance is available for this position.

Drug Free Workplace:
Boeing is a Drug Free Workplace where post-offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria are met as outlined in our policies.

Shift:
This position is for 1st shift.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. 

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. 

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations. 

Summary Pay Range:

Expert: $146,200-$197,800

Consultant: $176,800-$239,200

Applications for this position will be accepted until Mar. 25, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

Relocation assistance is not a negotiable benefit for this position.

Security Clearance

This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world. 

Raytheon is an industry leader in Stealth Technology. We are involved in all phases of design, development, production, and maintenance of Low Observable (LO) antenna and Active Electronically Scanned Arrays (AESA) systems. We are currently looking for Stealth / Low Observable / Radar Cross Section (RCS) / Signature Management / Survivability Engineers to work on challenging, state-of-the-art technical projects.

Raytheon’s Apertures and RF Department is seeking a Principal Antenna Design Engineer to join the Radome & Apertures team in McKinney, Texas. 

The candidate will support state-of-the-art ultra-wideband phased array antennas, individual antennas, and RF Low Observables (LO) within the Company. The selected candidate will work with various teams of engineers and scientists with backgrounds in AESAs, Antennas, Radomes, Computational Electromagnetics Modeling (CEM), RF Test, Mechanical, Structural and Thermal analysis, Material Science, Process and Manufacturing Engineering and survivable antenna technology.

The ideal candidate for this role will enjoy both theoretical design and hands-on engineering tasks. If you are looking for an opportunity to grow with a leader in the Defense Industry, this is the perfect opportunity for you! This position requires job duties to be performed onsite due to the sensitive nature of this work and the desire for in-person collaboration, however we offer flexible in-office hours and the ability to perform some job duties remotely.

What You Will Do

• Responsible for the hands-on design and realization of LO antennas, phased array antennas and passive RF components.

• Use computational electromagnetic analysis software to design and predict performance on various types of antennas and apertures (spiral, sinuous, Vivaldi, patch, slot, horn, ultra-wideband tightly coupled dipole arrays, etc.).

• Exhibit exceptionally high level of innovation, creativity, and initiative.

• Support customer programs through modeling and simulation of LO antennas or RF components/systems and leading teams that perform these functions.

• Provide technical solutions to a wide range of difficult problems involving antenna/sensor-based applications such as radar, electronic warfare, electronic attack, electronic support measures, communications, geolocation, direction finding, etc.

• Establish and maintain effective working relationships with internal and external customers. Represent the organization in providing solutions to difficult technical issues associated with specific projects.

• Mentor and guide more junior engineers and technicians in the design, build, and test phases of projects and programs.

• Work with interdisciplinary engineering teams including thermal, structural, mechanical, systems, etc.

• Participate in and guide the testing of RF hardware for required performance metrics: VSWR, insertion loss, gain, polarization, RCS.

• This 1st shift role will be 100% on-site and based in McKinney, TX.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior work experience, or an Advanced Degree in a related field and minimum 5 years’ experience.

• Engineering experience to include any combination of the following:

  • Radar Cross Section (RCS) reduction, prediction, measurement, and analysis & simulation.

  • Design, fabrication, and test of conformal antennas, apertures, and passive RF components (i.e. radiating elements, radomes, power dividers, couplers, transitions, multi-layer board designs, Frequency Selective Surfaces (FSSs), etc.).

  • Designing, fabricating, and testing ultra-wideband phased array antennas such as Tightly Couple Dipole Arrays (TCDA), Vivaldi, Sliced Notch, Planar Ultra-wideband Modular Arrays (PUMA).

• Experience with RCS analysis tools such as X-Patch, SENTRi, FEKO, HFSS, CST or other company specific CEM analysis packages.

• Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Master’s or PhD in Electrical Engineering with a concentration in Electromagnetics.

• Experience presenting technical data to peers, executives and customers.

• Experience writing and leading technical proposals.

• Experience winning new business and executing contract research and development (CRAD) programs.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Information: North Texas - part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

  The salary range for this role is 101,000 USD - 203,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

  RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

  Privacy Policy and Terms:

  Click on this link to read the Policy and Terms

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Defense Space & Security (BDS) is seeking a Senior Design and Analysis Engineer to serve the Air Dominance program in Berkeley, MO.

Position Responsibilities:

• Leads work with customers to develop and document complex electronic and electrical system requirements

• Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs, and interface specifications

• Leads work to test and validate to ensure system designs meet operational and functional requirements

• Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements

• Solves problems and provides other support of fielded hardware and software over the entire product lifecycle

• Researches technology advances for potential application to company business needs

• Makes recommendations for technology investments

Basic Qualifications (Required Skills and Experience):

• Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement

• 9+ years of related work experience and a bachelor’s degree or an equivalent combination of related work experience and technical education

Preferred Qualifications (Desired Skills and Experience):

• Experience in Open Mission Systems (OMS) development

• Experience in Model Based System Engineering (MBSE) development

• Familiarity with Universal Command and Control Interface (UCI) message standard and Common Abstraction Layer (CAL)

• Experience with system design and development, including component interactions, interfaces, and overall system functionality

• Experience with requirements development and management, including technical performance specification and statement of work development.

• Experience with NSA C2 and NCDSMO interactions and certification processes

• Experience with multi-level Security Networks

• Experience with multi-level Security Embedded Systems

• Experience with Cryptographic units, Cross Domain Solutions/Guards including access CDS and transfer CDS

• Knowledge of 3U and 6U VPX/OpenVPX architectures: This includes the VITA 46 and VITA 65 standards, appreciating the distinct advantages and trade-offs of each form factor in terms of size, weight, power (SWaP), processing capability, and I/O density.

• Knowledge of Signal Integrity & Interconnect: Expertise in high-speed digital signal design, including impedance matching, managing signal integrity, and utilizing advanced interconnect solutions like VPX3's discrete coaxial/twinax cabling is highly valued

• Experience with High-Performance Embedded Computing (HPEC): How to integrate and optimize performance for demanding workloads within the constraints of 3U and 6U form factors

• Experience with hardware design and development, encompassing all phases of the product lifecycle from initial design to flight maturity

• Experience with hardware-in-the-loop (HIL) simulations and testing methodologies to verify system functionality

• Experience with designing secure architectures, implementing cryptographic protocols, secure boot processes, firmware validation, and secure communications

• Experience with Open Architecture Standards: Familiarity with standards like SOSA (Sensor Open Systems Architecture), which leverages VPX standards

• Experience with Mezzanine Card Utilization: Understanding how mezzanine cards (e.g., XMC) can enhance functionality and scalability within 3U and 6U VPX systems

• Experience with 3U/6U FPGAs, GPU, and CPUs

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Relocation:

This position offers relocation based on candidate eligibility. Note: Basic relocation will be offered for eligible internal candidates.

Drug Free Workplace:

Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting

• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $136,850-$185,150

Applications for this position will be accepted until Mar. 27, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim U.S. Secret Clearance Pre-Start and final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Do you have previous experience in scenic design, production, or carpentry and are looking to continue using your skills in an amusement park setting? Now is your chance to do just that by becoming a Scenic Carpenter with Six Flags Over Georgia’s Live Entertainment Department.

• Creates and builds new show and event product.
• Installs, operates and maintains technical equipment for productions and events.
• Work on crews that build, set up, operate, and tear down our live shows and events.
• Read, understand, and implement plans and blueprints.
• Translate plans and designer concepts into functional build, shows, and events.
• Assemble and install structures, equipment and infrastructure with minimal supervision.
• Proficiency with hand and power tools required.
• Operate a variety of equipment, as assigned, such as golf carts, forklifts, scissor lifts, boom lifts, construction equipment, and motor vehicles.
• Work individually or in a team setting.
• Installs and operates show production technical equipment, including sets, lights, sounds, video elements and props
• Performs preventive maintenance on equipment
• Construct and install new show product in manner consistent with the artistic vision of park management, show producers and designers
• Troubleshoots equipment failure and works to resolve any issues safely and efficiently
• Assists with load in and load out of shows, events, Halloween Haunt and other park activities and productions
• Secures rentals, guest artists, production crews, and other outside labor/materials as assigned
• Prepares facilities for daily activities, ie. Rehearsals, clean ups, maintenance calls, shows, special events, etc
• Ensures smooth operation of all events and shows
• Works with team to set up lights, staging, sets, sound, video and special effects, even if not in area of expertise
• Provides guest service according to Six Flags standards when serving the guest or working with subordinates, including initiating guest interactions, answering questions and giving directions
• Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Six Flags safety guidelines and requirements and report all unsafe or unusual conditions to supervision.

Pay Rate: up to $17.50/hr.

• May work in a variety of sections of the Entertainment Department: including Lighting, Sound, Video, Set Build, Construction, Props, etc.
• Must have theatrical experience in one or more of the following: Scenic painter/artist, props, scenic carpenter or construction, rigging, special effects, decor, stage lighting or live sound reinforcement
• Ability to work nights, weekends and holiday periods to meet business needs
• Ability to recognize when additional assistance or direction is required, and to seek that assistance or direction
• Have general working knowledge of the operation of power tools
• Ability to work with team members, contractors, vendors and guests in a positive and professional manner
• Ability to maintain composed and professionalism during high pressure situations
• Ability to work effectively and achieve department goals under time constraints and quality pressures
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
• Ability to compute rate, ratio and percent and to draw and interpret bar graphs
• Ability to speak and understand English at a level sufficient to interact with guests; provide basic directions; and answer guest question