N Able Take Control Jobs in Usa

Description

Please note that this opportunity is contingent on program funding. Start dates are determined after funding confirmation.

Northrop Grumman Aeronautics Systems sector is hiring a Senior Principal Guidance Navigation and Controls Engineer to join our Vehicle Engineering team of qualified, diverse individuals in Melbourne, Florida.

Responsibilities may include:

• Lead the Guidance, Navigation, and Control system engineering requirement maturation
• Lead the integration of autopilot and auto throttle capabilities into the Vehicle Management System
• Lead subsystem level certification activities

Basic Qualifications

• Bachelor of Science (BS) in a Science, Technology, Engineering, or Mathematics (STEM) discipline and 8 years of relevant experience; OR Master of Science (MS) in a STEM discipline and 6 years of relevant experience
• Your ability to transfer and maintain the final adjudicated government Secret clearance (DoD must be in-scope or enrolled in Continuous Evaluation) and any program access(es) required for the position within a reasonable period of time, as determined by the Company.
• Knowledge of fixed-wing aircraft dynamics
• Knowledge of fly-by-wire control systems
• Experience in system engineering requirement definition, verification, and validation
• Experience analyzing non-linear simulations of aircraft closed-loop responses
• Experience creating certification test procedures and test cases
• Working knowledge of autopilot and autothrottle capabilities into Vehicle Management Systems
• Working knowledge of Flight Management Systems, including RNAV
• Experience using MATLAB to create, process, analyze, and visually represent data.
• Experience using Simulink to model dynamic systems.
• Experience using Model Based System Engineering tools
• Familiarity with programming (C/C++, Python)

Preferred Qualifications

• Experience developing and integrating autopilot and autothrottle capabilities into Vehicle Management Systems
• Experience with Flight Management Systems, including RNAV
• Experience using CAMEO to create system requirement models
• Experience using System Composer to create software architecture
• Experience with MIL-STD-1797B
• Experience with AS94900 or MIL-STD-9490
• Experience with DO-178C
• Experience for Atlassian tool suite (Jira, Confluence, Bitbucket)

#AS-FA3

Now Hiring: HVAC Controls Technician

Location: St Louis, Missouri

Schedule: Full-time | Flexible Hours (7:30 AM – 4:30 PM typical shift)

About the Role

We’re looking for a motivated and skilled HVAC Controls Technician to join our growing team! An HVAC Controls Technician is responsible for programming, troubleshooting, startup, checkout, and servicing of Building Automation Systems (BAS). Key duties include configuring and optimizing system performance, diagnosing and resolving issues, and ensuring proper integration of HVAC controls. The technician will also work closely with project teams, contractors, and clients to ensure seamless operation and functionality of the BAS. Strong technical expertise in control systems, problem-solving skills, and the ability to work independently in field environments are essential for this role. If you enjoy hands-on problem-solving, working with advanced control systems, and seeing your work directly impact performance — this opportunity is for you. This full-time position offers flexible scheduling, typically with 8-hour shifts during office hours (7:30 AM – 4:30 PM).

What You’ll Do

• Program, configure, and optimize Building Automation Systems (BAS).
• Perform startup, checkout, and commissioning for new projects.
• Troubleshoot control issues and resolve HVAC system integration challenges.
• Conduct point-to-point verification and ensure systems meet design specifications.
• Assist with field service calls during project and warranty phases.
• Guide and support electrical subcontractors on project sites.
• Deliver materials, monitor installations, and maintain communication with the project team.
• Update and correct manual drawings for engineering and documentation accuracy.
• Participate in the on-call rotation and assist with support agreements.
• Collaborate with management to develop a personalized professional growth plan.

What We’re Looking For

• Strong time management and problem-solving skills
• Excellent communication and customer service mindset
• Action-oriented and dependable under pressure
• Understanding of HVAC systems, electrical wiring diagrams, and basic networking
• Positive, team-oriented attitude
• Valid driver’s license and ability to pass a background check and drug screening

Nice to Have:

• 1+ years of experience in HVAC, Electrical, or Automation systems
• Advanced computer or networking skills
• Associate’s or Technical Degree in HVAC, Electrical, or Automation

What We Offer

We believe great work deserves great rewards — that’s why we invest in your success and well-being:

Health & Wellness

• 100% Employer-Paid Medical, Dental & Vision Insurance for Employees
• Life Insurance
• FSA/HSA Accounts
• Short & Long-Term Disability
• Employee Assistance Program
• Fitness Reimbursement

Career & Financial Benefits

• Simple IRA Retirement Plan
• Tuition Reimbursement & Paid Training Opportunities
• Bonuses & Overtime Opportunities
• Growth potential – We love to promote from within!
• Boot Credit

Work-Life Balance

• Paid Time Off, Paid Holidays & Personal Time
• Flexible Schedule & Parental Leave
• Company Vehicle, Phone, and Fuel Expenses
• On-Call Incentives
• Fun and Collaborative Team Culture

Join a company where your work truly powers performance.

If you’re ready to take your HVAC controls career to the next level with a team that values growth, collaboration, and innovation — we’d love to hear from you!

Apply today and start building smarter with us.

• Responsible for updates, upgrades and maintenance of the following systems: Rail Operations Control System (ROCS); Predictive Arrival and Departure System (PADS), Positive Train Control (PTC) back-office systems, Traction Power Supervisory Control and Data Acquisition (SCADA) System and Rail Scheduling.
• Perform Quality Assurances and system engineering support of all back off systems including PTC office systems, Back Office Server (BOS), Rail Operations Control System (ROCS), Network Management System (NMS); Interoperable Train Control Message Server (ITCMS); Wayside Status Relay Service (WSRS), and the interfaces to all other operational systems.
• Develop, document, and maintain Standard Operating Procedures (SOPs), technical standards, and best practices for all train control and related systems to ensure consistency, safety, and regulatory compliance.
• Develop and implement training programs to upskill staff, mentoring team members at all levels on train control systems, operational procedures, and project management to strengthen technical capacity, foster skill development, and ensure succession planning. 
• Ensure Caltrain systems meet Federal Railroad Administration (FRA) mandated interoperability requirements with all tenant railroads; ensure Caltrain train control systems are compatible with Association of American Railroads (AAR) standards; follow the ITC guidelines that Caltrain must maintain ?N-2? backwards compatible software versions.
• Manage complex and large-scale train control engineering projects as the Technical Lead for Caltrain. 
• Manage the work of outside contractors and assist higher level Caltrain Directors and Executives in planning and evaluating the quantity and quality of work performed by subordinate staff.
• Supervise staff.  Hire, mentor, and take appropriate corrective and/or disciplinary action.  Ensure EEO policies and procedures are followed. Participate in selection of staff.  Coordinate staff training and professional development. Establish performance objectives. Monitor and evaluate employee performance.

• Establish and maintain work relationships with internal and external stakeholders to develop consensus on capital project work plans.
• Establish schedules and methods for providing train control system engineering design services on assigned capital projects; identify resource needs; review needs with appropriate management staff; allocate resources accordingly.
• Review and approve project schedules; assist in strategic planning; prepare status reports; coordinate project resources; communicate with all project participants on relevant issues; identify and resolve train control engineering issues.
• Provide general technical oversight of railroad train control systems.
• Perform system usage and performance analyses. 
• Support Caltrain Configuration Management (CM) Manager on configuration control, prioritize system defects and corrective actions; participate in Configuration Control Board (CCB) meetings as required.
• Direct, review, and approve the preparation of train control engineering designs, drawings, and specifications; identify and resolve technical engineering issues.
• Manage technical elements of the office systems warranty and long-term maintenance support service agreements.
• Review and approve operating manuals and procedures developed by various systems providers or vendors.
• Manage all technology refresh and software upgrades/updates and associated testing without interrupting regular railroad operations.
• Establish and lead a knowledge management framework to systematically capture, update, and share institutional knowledge through structured documentation, training programs, and knowledge transfer initiatives.
• Participate in the preparation and administration of the train control engineering program budget (Operating & Maintenance, and Capital); submit budget recommendations; monitor expenditures.
• Review consultant proposals and designs; recommend awards; conduct or participate in the pre-bid conferences prior to system contract awards.
• Perform all job duties and responsibilities in a safe manner to protect one?s self, fellow employees, and the public from injury or harm. Promote safety awareness and follow safety procedures in an effort to reduce or eliminate accidents.
• Perform other duties as assigned.

Sufficient experience, training and/or education to demonstrate the knowledge and ability to successfully perform the essential functions of the position. In lieu of a degree, work-related experience that demonstrates the skills and experience necessary to perform this role will be accepted. Development of the required knowledge and abilities is typically obtained through but not limited to:

• Bachelor?s degree in electrical/electronics, computer science, or a related field.
• Five (5) years of railroad industry experience in Train Control System and SCADA system development and maintenance.
• Two (2) years supervisory experience

• Knowledge and experience with AIMCore Product/Software a plus.
• Possesses a broad interdisciplinary knowledge of supervisory train control, wayside signal, highway crossing warning system, predictive and arrival system, traffic signal control, traction power substations and distribution, SCADA, server systems, virtualized server architectures, databases, cloud server systems, networking, etc.
• Knowledge of operating systems (UNIX, Linux, Microsoft)
• Knowledge of VHF and UHF radio voice and data communications, information assurance, data security and networking technologies.
• Experience with Configuration Management and Quality Assurance Systems.
• Ability to Interpret and revise engineering plans, drawings, and specifications.
• Proficient with Microsoft Office Suite.
• Effective oral and written communication skills.

PI282632635

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

The Territory Manager, Infection Control (IC) will be responsible for the sales and support of Getinge Infection Control equipment consisting of sterilizers, washers, service contracts and equipment, and assists with asset management solutions and consumables for both existing and potential customers in the assigned territory. Business opportunities for this position will include a balance of replacement, renovation, and new construction business. Key objectives of this role will be, to increase Getinge market share, develop and encourage strong customer relationships, and build brand loyalty and customer satisfaction. The position must be able to plan, prioritize, monitor, and track all sales cycle events; apply knowledge of the organization's services, products, and marketing techniques in pursuit of responsible profit margin and market share growth. This territory covers Ohio, western Pennsylvania and western New York.

Job Responsibilities and Essential Duties

• 
  
• Responsible for meeting or exceeding sales targets while maintaining expenses within assigned territory.
  
• Able to develop strategic sales plans for all required sales opportunities, as well as ability to plan, prioritize, monitor, and track all sales cycle events.
  
• Monitor and update individual forecasted sales data on a weekly basis with a focus on accuracy and completeness of data.
  
• Provide Return on Investment (ROI) and/or business case information to justify purchasing Getinge Surgical Workplace products.
  
• Manage forecasting, monitoring, closing and post-sales support of all territory business.
  
• Where possible, promote all Getinge product offerings, including all equipment lines, training programs, and service contracts.
  
• Market and sell equipment to installed base as upgrades or replacement.
  
• Market equipment to new customers to replace competitions installed base.
  
• Lead follow-up, sales planning, and territory management.
  
• Identify required resources to effectively position Getinge during the sales and support process.
  
• Track, report, and analyze sales opportunities with the Regional Sales Manager on a routine basis.
  
• Manage completion of product demonstration events and assist in installation and post-sales support.
  
• Monitor and report customer issues with the Regional Sales Director and/or responsible Getinge employee.
  
• Manage time and resources within the assigned territory in conjunction with near-term plans to ensure the territory's objectives are achieved.
  
• Participate in regional and national trade shows when required.
  
• Enhance teamwork within the region and maintain a collaborative relationship with all levels of the organization.
  
• Ensure compliance with governmental regulations and maintaining honesty, integrity, and excellent work ethics.
  
• Perform other related duties as required or assigned.
  

Minimum Requirements

• 
  
• Bachelor's Degree or equivalent combination of education and work experience.
  
• Minimum of 3 years medical device/capital sales experience, which includes direct selling experience to physicians and hospitals; or minimum of 4 years applicable clinical experience with sales aptitude.
  
• Alternatively, minimum of 4 years of experience in roles focusing on building and maintain strong client relationships, problem-solving and creating and executing strategic plans, and coordinating with multiple stakeholders to drive organizational success growth can be considered if it demonstrates strong sales aptitude.
  
• Must have a valid driver's license.
  

Required Knowledge, Skills and Abilities

• 
  
• Demonstrated record of success or achievement in professional positions, including meeting or exceeding performance goals.
  
• Solid understanding of specified functional area, and application of business concepts, procedures, and practices.
  
• Able to prioritize and multi-task in a highly demanding matrix environment, and ability to function well in a team selling approach.
  
• Carry out operations within an established budget.
  
• Must have sound knowledge of a variety of alternatives and their impact on the business and be able to exercise judgment in selecting innovative and practical methods to achieve problem resolution in the assigned territory.
  
• Establish and cultivate an extensive network of support to facilitate completion of assignments.
  
• Ability to influence middle management and external customers on technical as well as new business solutions.
  
• Excellent communication, listening, interpersonal and organizational skills; self- motivated and directed to achieve assigned goals.
  
• Intermediate skills in Microsoft Excel, Word, PowerPoint and Outlook and familiarity with Customer Relationship Management CRM) tools
  

• 
  
• Must travel as required to customer sites (75% and above); must reside within the assigned region; must be able to operate an automobile (valid driver's licensed required).
  
• Must be able to respond to inquiries and communicate with others in writing and via telephone.
  
• Must be able to decipher data from computer-generated reports, software programs, technical manuals, and written correspondence.
  
• Must be able to work at PC workstation/laptop 1/3 of standard workweek.
  

#LI-JW1

Sales salary range: Total Compensation= $165-$185K. (base + at plan target incentive) depending on experience and location

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

Cleaver Brooks Sales and Service is looking for a Senior Boiler Controls Technician to join our team in Dallas, TX. The Senior Boiler Controls Technician is responsible for wiring, firing, and testing boilers in the shop & field. This position is responsible for the readiness of the customer equipment.

Any salary estimation specified in this job board may or may not be aligned with our organization’s pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details!

Job Location: Dallas, TX

Signing Bonus Details:

• Qualified Tech candidates with 1-5 years of relevant boiler experience will receive a $2500 signing bonus! ($1500 paid upon hire, and $1000 paid after 90 days)
• Qualified Techs with +5 years of relevant boiler experience will receive a $5000 signing bonus! ($3000 paid upon hire, $2000 paid after 90 days)

Essential functions:

• Wire all controls and motors for watertube and firetube boilers and auxiliary equipment.
• Rebuild control valves and regulators.
• Build and test control panel using Engineering wiring schematic and layout.
• Build and test fuel skids using Engineering wiring schematic and layout.
• Build and test condensate tanks and deaerators.
• Trim out firetube and watertube boilers.
• Perform start-up of Rental boilers in field.
• Assist departments as required.
• Reads blueprints and wiring schematics.
• Able to trouble shoot, fire, and set combustion on all types of boilers, including but not limited to boiler with superheaters, desuperheaters, and economizers.
• Determines valve trim, regulator size and spring, oil gun length and size, and all other parts and accessories needed to fire any boiler.
• Able to fire and set combustion on boiler with all types of pneumatic controls.
• Able to fire and set combustion on boiler with all types of electrical controls.
• Able to train other employee’s on the operation and controls of boilers.
• Maintain condition of and inventory of all tools and monitors.
• Apply intellect, creativity, adaptability, judgment, and management skills to achieve required results.
• Ensure duties and company projects are accomplished in an efficient and cost effective manner.
• Support peers and management with internal and external projects.
• Adhere to company policies.
• Other duties as assigned.

Basic Requirements:

Education:

• High School diploma or equivalent

Experience:

• Minimum of two (2) years of electrical troubleshooting/ technical background.

Other Requirements:

• Must possess a valid drivers license with a safe driving record
• Must be able to read and work from blueprints and schematics.
• Must be able to follow written and verbal instructions.
• Mechanical and electrical background a must.
• Must have the ability and knowledge to trouble shoot systems without the appropriate schematic.

Physical Skill & Effort:

Requires stooping, climbing, bending, crawling, and lifting 50 pounds, working in confined and elevated areas, and prolonged standing.

Working Conditions and Hazards:

Some work in physical plant environment where plant orientation may be required and safety precautions are required. May encounter some unpleasant working conditions of brief duration. Little to no contact with hazardous conditions.

Benefits of being a Cleaver-Brooks Sales & Service Employee:

• Competitive salary
• Comprehensive benefits, including medical, dental, vision, maternity support program, discounted virtual physician visits, voluntary medical benefits (Critical Illness, Hospital Care, and Accidental Injury), FSA, HSA, life insurance, short term and long-term disability
• Cash matching 401(k) plan
• Employee assistance program (EAP)
• Pet insurance
• Employee discount program
• Tuition assistance
• Paid time off and 11 paid holidays

Who is Cleaver-Brooks Sales & Service:

Cleaver-Brooks Sales and Service, Inc. (CBSS) is a market leader in providing fully integrated boiler and burner systems. CBSS offers a full range of capabilities from: new equipment, installation, rentals, retrofits, repairs, parts, and service. We can deliver, install, and upgrade boiler room solutions that improve efficiency, reduce cost, and optimize space. CBSS delivers the most efficient, reliable, safe, and environmentally sustainable solutions that differentiate us in the marketplace.

We are a 24/7 customer driven operation.

This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgement, to be proper.

Equal Opportunity Employer

This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

By applying to this job and providing your mobile number, you are agreeing to receive an initial text from Cleaver-Brooks, which you will have the ability to opt out of upon receipt. Message and data rates may apply. Message frequency varies.

Join a World-Class Engineering Team Building the Future of Pharma Manufacturing

At Rheo, we’re not your average team. We're a tight-knit group of 85 innovators, builders, and problem-solvers creating custom automated powder handling equipment for the world’s leading pharmaceutical companies. Our solutions help produce life-saving medications across the globe, how’s that for impact?

We combine cutting-edge engineering with a collaborative spirit that works together to solve problems. If you’re passionate about designing high-performance systems and want to be part of something truly meaningful, we’d love to meet you.

Rheo Values: 

• Bold Humility: The courage to speak, act, and listen without arrogance. 
• Initiative: The instinct for taking action to improve, solve, and deliver. 
• Collaboration: Proactive communication with all stakeholders. 
• Reliability: Persistent follow-through on commitments. 
• Competence: The ability to do your job well. 

Pay Range: $100,000.00 - $145.000.00 

Role Summary:  

As a Senior Controls Engineer, you will assist in the buildout of the process automation architecture and lead the controls programming for a wide variety of material handling and process technology systems within the life sciences and chemical industries. 

Everyday, you will develop automated process technology working with key stakeholders, both internal and external, on design requirements and solutions. This will involve PLC and HMI programming, often from scratch, the testing/debugging of control systems, I/O checkout, customer on-site support, and more. 

Objectives: 

• Assist project managers with user requirements review from a programming standpoint 
• Write PLC code for equipment and control processes, often from scratch 
• Develop HMI applications for equipment and control processes, often from scratch 
• Help set technical direction within the Controls & Automation team 
• Review programming for other Controls team members and coach 
• Complete I/O checkout  
• Testing/Debugging of control systems on equipment 
• Integrate equipment with third party control systems and networks 
• Participate in equipment and process system design reviews 
• Provide on-site support for customers as needed  
• Perform other tasks as assigned by your manager from time to time 

Success in This Role Looks Like: 

• PLC/HMI programs that pass I/O checkout, testing, and FAT/SAT with minimal rework 
• Customer requirements met with high level of customer satisfaction 
• Able to troubleshoot and support controls systems independently  

Minimum Qualifications: 

Education 

• Bachelor’s degree in an engineering or technical field OR equivalent practical experience 

Software 

• Proficiency in Microsoft Office programs (Word, Excel, Outlook, Teams) 

Experience 

• Direct and proven experience with PLC and HMI programming from scratch 
• Familiarity with Allen Bradley PLCs (ControlLogix, CompactLogix, MicroLogix) and HMIs (FactoryTalk View SE and ME) or similar 
• Familiarity with PowerFlex Drives or other VFDs 

Traits 

• Rheo values match (see beginning of job posting) 
• Superb Communication – understandably and naturally share your ideas 
• Extreme Ownership – able to see a project through, no matter the obstacle 
• Detail-Orientation – high attention to detail and highly organized 
• Excellent Mechanical Aptitude 

Preferred Qualifications: 

• Experience and consistent use of LogixDesigner v33 or greater 
• Experience and consistent use of FactoryTalk View v12 or greater 
• Experience with PlantPAx, sequencing/phase manager, AOIs and ladder logic programming 

Working Conditions: 

• Office and shop-based work environment with prolonged periods of sitting or standing while working on a computer, reviewing designs, or supporting equipment testing and debugging. 
• Hands-on exposure to industrial equipment and manufacturing environments, including control panels, instrumentation, and process systems. 
• 25% travel required to customer sites for commissioning, troubleshooting, and on-site support, including time spent standing walking, and working around operating equipment. 

Benefits 

• Leading Medical Insurance – consistently the leading medical rates for small businesses in the area  
• Health Savings Account with Employer contributions (depends on plan selected)  
• Dental Insurance  
• Vision Insurance  
• Life Insurance  
• Short Term Disability 
• Long Term Disability 
• Identity Theft Insurance  
• 401k with 4% employer match  
• Generous PTO  
• Paid Paternity & Maternity leave  
• Paid cell phone plan with stipend for new phone every 2 years  
• Referral program 

POSITION SUMMARY

The Controls Leader will provide key leadership with regard to power and control systems, equipment specification and maintenance, proper operation, technician development, troubleshooting and repair to achieve or exceed reliability targets the plant. This role has responsibility for systems optimization, compliance, personnel safety and technician skill development relative to plant electrical power and process control systems.

KEY RESPONSIBILITIES

• Assists primary administrator and troubleshooter for plant power and control systems and is a key member of plant technical leadership.
• Provides input to the Engineering Projects Manager to develop and manage power and control standards and ensure application of the standards on all projects and upgrades.
• Leads the execution of the site masterplan for power and controls systems to include understanding of the installed base, and replacement plan for obsolete equipment/technologies.
• Builds and maintains a sustainable system for plant Electrical & Instrumentation (E&I) technicians skill development. Coaches technicians on skill assessment and development of operating within the department.
• Manages Electrical & Instrumentation (E&I) technicians and daily direction setting.
• Knows, communicates, and ensures technician compliance to local and national regulator codes (NFPA 70, NFPA 70e, NFPA 79 and OSHA 1910). Is also responsible for ensuring equipment and safe practice compliance in their area of responsibility.
• Responsible for validation of the MES data from PLCs. Support plant Process Engineers in conditioning PLC data to accommodate effective data analysis including application development.
• Provides support in the design and implementation of machine control and process automation applications, such as: control strategies, HMI design, MES applications and KPI development.
• Works with engineering and operations to identify losses, and develop plans and strategies to eliminate them, in the areas of safety, quality, reliability and cost.
• Owns parts or whole Key Elements for systems related to power and control system such as electrical safety (LOTO, Electrical PPE, Energized work permits, low voltage qualification, etc.) and Quality/CCP compliance (checkweighers, metal detectors, vision systems, ingredient flows, temperatures, etc.).
• Works closely with engineering and operations leaders on selection and installation/start-up of new equipment. Becomes the technical expert on new equipment and ensures the training of others regarding control systems.
• Provides power and controls engineering support on capital initiatives.
• Provides support throughout other parts of the plant as needed on a daily basis.
• Learns and applies control, simulation and process modeling technologies to analyze and improve overall process and packaging operations.

Education

• Bachelor's Degree in Engineering is required; Electrical engineering degree is preferred

Experience

• 5 years of relevant controls experience is required
• Manufacturing experience is preferred
• Mechanical and electrical experience in food manufacturing is preferred

Other

• Ability to work and manage within a team environment
• Strong knowledge of machine and/or process control hardware, instrumentation and software including Allen Bradley PLC and Rockwell FactoryTalk platforms
• Working knowledge of NFPA and OSHA guidelines related to electrical equipment and practices
• Proficiency in plant historian
• Understanding of technical systems and terminology
• Experience learning and integrating new technologies
• Experience leading the installation of equipment in food manufacturing environment
• Demonstrated results in manufacturing maintenance utilizing maintenance systems
• Experience with plant systems software
• Self-motivated and able to motivate others
• Strong organizational, critical thinking, and problem-solving skills
• Effective presentation, verbal, and written communication skills
• Proficient in Microsoft Suite applications
• Excellent interpersonal skills
• Willingness to work off-shifts or weekends as needed, as well as to take off-shift support calls as needed
• Experience leading, teaching or managing others effectively
• Some travel required
• Able to perform moderate activity including but not limited to, significant time spent on manufacturing floor and some physical work on equipment

About GEMCO
Founded in July of 2014 and headquartered in Indianapolis, Indiana, GEMCO Constructors is a national mechanical, electrical, plumbing, building automation systems, and service contractor providing comprehensive design and build solutions throughout the United States. GEMCO operates coast to coast, holding engineering and construction registrations, licenses, and certifications in more than 30 states.

Position Summary
The Traveling HVAC Startup Controls Foreman is responsible for the supervision, commissioning, and troubleshooting of new and existing mechanical systems in commercial and industrial buildings. This role ensures that all HVAC and control systems are installed, tested, and functioning according to project specifications, building codes, and client expectations. The Foreman provides leadership in the field, supports apprentices and technicians, and collaborates with project managers and engineers to ensure safe, efficient, and successful project delivery. This is a 100% travel job.

Primary Responsibilities and Duties

• Commission and start up commercial and industrial HVAC equipment, including refrigeration systems, air handling units, temperature controls, and heat pumps.
• Troubleshoot, diagnose, and repair existing HVAC and control systems to ensure proper operation and efficiency.
• Install and pressure test refrigeration piping systems and verify connections meet specifications.
• Ensure all startup and commissioning documentation, including service work orders and forms, are accurately completed and submitted in a timely manner.
• Coordinate work activities with other trades and departments to avoid conflicts and maintain project schedules.
• Provide on-site supervision, direction, and training to apprentices and technicians assigned to startup and service tasks.
• Monitor job progress and report status updates to project managers and leadership.
• Enforce company safety protocols and maintain a clean, organized, and hazard-free job site.
• Act as a technical resource for clients and ensure customer satisfaction through professional communication and service delivery.
• Perform additional duties as required to support project and company objectives.

Traits/Competencies

• Strong technical knowledge of HVAC systems, controls, and refrigeration.
• Flexibility to adapt to changing job requirements and site conditions.
• Decisiveness in solving technical and operational issues.
• Dependability in leading field teams and ensuring work completion.
• Resourcefulness and initiative in troubleshooting and system optimization.

Why GEMCO?
This is an opportunity to lead plumbing crews on significant construction projects with a nationally recognized contractor. GEMCO offers competitive pay, comprehensive benefits, and a team-oriented culture built on safety, innovation, and professional growth.

Requirements

• Minimum 5 years of refrigeration / service technician experience with preventative maintenance, diagnostics and repairs of Commercial and / or Industrial HVAC Equipment, Systems and Buildings
• Universal or type 2/3 Refrigeration Certification required
• Must maintain a neat appearance and take pride in quality work
• Requires excellent customer service and communication skills
• Must be safety conscious, well organized and have good verbal / writing skills
• Must be able to analyze, troubleshoot, help prepare quotes and repair refrigeration for air handling systems and equipment including boilers, chillers, exhaust fans, controls, refrigeration, heat pumps, steam systems, humidifiers, rooftop, VAV, etc.
• Must be drug free and have a clear current driving record with valid license

Physical Demands  

• The position requires standing, bending, reaching, lifting a majority of the workday.
• Lift repetitively 50 pounds.
• Climb ladders.
• Must be able to work at heights of up to 100 feet or more.
• Work from scaffolding and lifts.
• Drive a company vehicle (truck).
• Capable of driving long distances (up to 14 hours per day) between job sites.
• Other manual labor as required.

Summary

Why GEMCO

Join a fast-growing national contractor offering competitive pay, comprehensive benefits, and the opportunity to make a lasting impact on company success.

Benefits and Perks

• Company paid benefits package
• Health Savings Account with company contribution and matching
• 401(k) with company match
• Paid Time Off
• Annual bonus
• Holiday bonus
• Anniversary bonus program
• Phone allowance
• Solo hotel room on travel, usually with kitchenette
• Company vehicle truck or van based on role

We are an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.  

Kodak is looking for a Material Control Coordinator to join our Specialty Chemicals and Inks Manufacturing team in Rochester, NY.

We are seeking a motivated and detail-oriented individual to join our team as a Material Control Coordinator. In this role, you will be in the front line of communication with our customers, coordinating with operations, ensuring accurate order processing and supporting our business development team. This position requires the ability to multi-task, as well as organize and manage all forms of requests while providing excellent service to our customers.

Responsibilities:

• Maintain records (data entry) for all deliveries and shipments. File hardcopy documents per standard work.

• Create purchase requisitions for incoming materials and perform goods receipt once materials are delivered.

• Point of contact for product orders.

• Create orders for sales of solvents and invoices for incoming materials.

• Collect necessary documents after raw material receipt and product sales and send to customers.

• Collect necessary records from generator/broker for proper documentation to receive initial load/trial of material (manifest template, Land Disposal Restriction Forms, etc.)

• Create hazardous waste manifest documents for customers.

• Set up new customers, vendors, raw material items, and products items.

• Order internal production materials.

• Create purchase requisitions and manage purchase orders for railcar leases, subscriptions, contractors, and trade group memberships.

• Manage sample and small package shipments.

• Flexibility to learn operations work and assist as necessary.

• Hazardous waste receipt data entry into regulatory websites.

• Support Logistics Coordinator job functions.

• Monday – Friday, 40 hours/week with potential for overtime as needed.

• On location role with no remote work flexibility.

Job Skills:

• Excellent communication and teamwork skills, able to interface with sales, operations, engineering, transportation, transportation, management, logistics staff, etc.

• Good computer skills – SAP, MS Office (Outlook, Word, Excel, PowerPoint), familiarity with customer billing portals (Ariba).

• Initiative-taking - able to work independently.

• Problem solving – able to adapt and improve work processes.

• Willingness to learn and make positive contributions.

• Positive attitude.

• Flexibility - able to adjust to changing demands.

• 
  
• Design / Engineering
  
  • 
    
  • Generate design documents for SCADA/Automation projects
    
    • 
      
    • Develop design document narratives
      
    • Perform requirements analysis
      
    • Generate Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical engineering and 5-7 years field experience
  
• Associate degree in the electrical field and 10 years field experience
  
• High school diploma and 15 years field experience
  
• 5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• Must be a US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Initiates design documents for small projects and in support of large programs
  
• Develops design documents narratives
  
• Performs requirements analysis
  
• Develops Sequence of Operations / System Functional Documentation
  
• Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
  
• Develops Specifications
  
• Performs QA/QC and technical reviews of designs
  
• Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
  
• Comment Resolution
  

Mechanical-focused controls engineer (BAS/BMS)

• 
  
• Experience on EPMS monitoring
  
• Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
  
• Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
  
• Familiarity with Cisco network switch programming and design preferred
  

• 
  
• Lead programming / configuration team efforts for complex automation and SCADA applications.
  
• Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
  
• Testing / Troubleshooting / Deployment / Commissioning
  
• Author testing / commissioning procedures
  
• Preparation of test reports
  
• Originates test procedures
  
• Commissioning of deployed systems
  
• Development of test equipment and simulation devices
  
• Perform Factory and Field Testing
  

• 
  
• Perform troubleshooting on service calls to existing and legacy system operators
  
• Perform hardware / software upgrades and replacements on existing systems
  

• 
  
• Conducts any surveys, inspections, tours, etc. of client sites, as required
  
• Prepares cost estimates and supporting documents for small projects
  
• Perform hardware / software upgrades and replacements on existing systems
  
• Evaluation and pricing of change orders
  

• 
  
• Assigns technical tasks and coordinates with entry-level engineers
  
• Assigns tasks and coordinates with Technical Staff
  

• 
  
• Experience in reading electrical and control schematics and plans
  
• Experience in control system startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and machinist hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• 3-7 years' experience
  
• Bachelor's degree in engineering or higher
  
• Associate degree (add 3 years)
  
• High school diploma (add 5 years)
  
• Must be a US Citizen
  

• 
  
• Experience in computer networks
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software
  
• Standard Office Software (Microsoft Word, Excel, etc.)
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  
• Design Build Institute of America (DBIA)
  
• Engineer in Training (EIT) in relevant in field
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Why Work With Us:

We offer a best-in-class work environment for our team, supporting their professional growth while providing a challenging, exciting, and safe workplace. From offering a robust benefits package to generous annual performance bonuses, PTO, and more, we live our core values—teamwork, resiliency, and integrity—reflecting our long-term commitment to our employees, communities, and the environment.

Position Overview:

We are seeking a Process Control Technician Specialist to provide hands-on support for the process control systems that drive our metal, alloy, and component-making facility. This role is designed for a skilled technician with experience in troubleshooting and maintaining PLCs, HMIs, and industrial process control systems.The ideal candidate will support daily plant operations, lead equipment-based improvements, and contribute to the implementation of OPEX projects and continuous improvement initiatives across a complex, high-tech manufacturing environment.

Essential Duties:

• Provide hands-on technical support for plant process control systems, including routine checks, basic maintenance, and troubleshooting equipment or system faults.
• Provide daily technical support for plant process control systems, including troubleshooting and maintaining PLCs, HMIs, VFDs, sensors, and safety systems to ensure smooth and safe operations.
• Respond to process control-related issues as part of an on-call rotation,including after-hours support as needed.
• Assist in implementing and maintaining standard operating procedures for process control systems and support response protocols.
• Support troubleshooting efforts led by engineers to minimize downtime and ensure continuous improvement of system performance.
• Document and report system issues,maintenance actions, and resolution outcomes to engineering leadership.
• Perform routine inspections of process control equipment to identify and report wear,potential failure points, or improvement opportunities.
• Support continuous improvement (CI) and OPEX projects by implementing changes to process control systems, improving equipment functionality, and reducing downtime.
• Perform hands-on installation, testing, and calibration of process control components—such as instrumentation, control panels, and field devices.
• Read, interpret, and redline electrical schematics, P&IDs, panel layouts, and wiring diagrams for existing or modified systems.
• Support the programming, configuration, and maintenance of process control platforms including Rockwell (Studio 5000), FactoryTalk View, and Siemens TIA Portal.
• Conduct preventive and predictive maintenance of process control systems; perform software backups, maintain change logs, and document all control system activities.
• Interface regularly with operators, maintenance, engineering, and EHS teams to ensure process control systems meet operational and safety requirements.
• Assist with commissioning and startup of new or modified process control systems, ensuring compliance with performance specifications.
• Use diagnostic tools (e.g., multimeters, oscilloscopes, network analyzers) to test and troubleshoot control signals and communications.
• Collaborate with other technicians, operators, and engineering staff to support safe, efficient plant operations.
• Support training efforts for maintenance and operations staff to improve system knowledge and troubleshooting capabilities.

Basic Qualifications:

• Associate degree or equivalent technical certification in Electrical Engineering Technology, Industrial Automation, Mechatronics, or a related field.
• 3+ years of hands-on experience working with PLC and HMI-based process control systems in an industrial or manufacturing environment.
• Proficiency in reading, interpreting, and modifying control system documentation such as electrical drawings and schematics.
• Hands-on experience with Rockwell (Allen-Bradley), Siemens, or similar process control platforms.
• Familiarity with industrial communication protocols: EtherNet/IP, Profinet, Modbus TCP.
• Comfortable working in an industrial environment with chemical,mechanical, and thermal processes.
• Experience using diagnostic tools such as multimeters, loop calibrators, and signal simulators.

Desired Qualities:

• 5+ years of process control or automation experience in a manufacturing setting.
• Proactive, self-motivated, and comfortable taking ownership of process control-related issues.
• Strong troubleshooting skills with an analytical approach to solving electrical/control problems.
• Familiarity with robotics, vision systems, or motion control technologies is a plus.
• Comfortable balancing multiple priorities and adapting to dynamic production demands.
• Basic CAD skills for modifying electrical schematics (AutoCAD Electrical preferred).
• Knowledge of SCADA systems and virtualized environments is a plus.
• Excellent verbal and written communication skills; able to clearly document work and collaborate across departments.
• Advanced proficiency in Microsoft Office tools, especially Excel and Outlook.

Benefits to Joining Our Team

CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Learn more about CPG by checking out our website here

#LI-TG1

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field TestingMaintenance
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
  
• Experience in reading mechanical and control schematics
  
• Experience in building automation systems (BAS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with test equipment and test equipment software
  
• Experience with networking design, configuration, and troubleshooting
  
• Experience with air handlers, chiller plant systems and data center CRAC units
  
• Ability to travel up to 80%
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Benefits to Joining Our Team

CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Learn more about CPG by checking out our website here

#LI-TG1