N Able Take Control Agent Uninstall Jobs in Usa
12,696 positions found
Border Patrol Agent (BPA) Entry Level
NEW RECRUITMENT AND RETENTION INCENTIVES!
IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.
DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW
The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.
If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities.
Salary and Benefits
Annual Base Salary for newly appointed BPAs varies per grade, as follows:
GL-5/GL-7 $49,739 - $89,518 per year
Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.
Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.
*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Duties and Responsibilities
As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include:
- Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
- Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
- Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
- Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
- Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications
You qualify for the GL-5 grade level if you possess one of the following:
Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR
Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR
Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.
You qualify for the GL-7 grade level if you possess one of the following:
Experience: One year of specialized work experience that shows you have the skills necessary to:
- Make sound judgments and decisions in the use of firearms.
- Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
- Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR
A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.
Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.
Other Requirements
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).
Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.
How to Apply:
Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.
You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.
If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
Type: Independent Contractor / Business Owner
Are you ready to be your own boss, control your income, and build something that's truly yours?
Farmers Insurance® is looking for driven, entrepreneurial leaders to own and operate their own Retail Insurance Agency. This is your chance to create a business with unlimited earning potential and the full backing of one of America's most trusted brands.
Why Build Your Agency with Farmers
- Freedom of Time – Set your own schedule and take control of your work-life balance.
- Unlimited Income Potential – You decide how far you go. Top performers earn $250K–$500K+ annually.
- Ownership & Equity – Build a business with real value. Many agencies resell for 2–4× annual earnings.
- Diverse Product Access – Offer solutions from Farmers plus 40+ additional carriers through Kraft Lake & Choice.
- Startup Incentives – Receive bonuses and financial support during your first 3 years to fuel your growth.
- Financial Services Expansion – Add life, annuity, and investment products with a new RIA platform launching soon.
- Relationship-Driven – Work with the clients and communities you choose.
Earning Potential
- Average Established Agents: $100K–$150K annually
- Top Performers: $250K–$500K+ annually
- Exit Value: sell service and commission rights on the open market
This is not just another job — it's a path to long-term wealth, independence, and legacy.
What You'll Need to Succeed
- Capital: Minimum $30K cash (ideally $100K+ to accelerate growth)
- Licensing: P&C and Life & Health preferred; securities licenses a plus
- Experience: Strong background in sales, leadership, or business ownership
Take Control of Your Future
If you're a motivated professional ready to build a business, not just work for one, this is your opportunity to make it happen. Farmers Insurance provides the brand, support, and tools — you bring the drive to succeed.
Apply today to learn more about launching your Farmers Insurance Agency in Alabama.
Quality Control Inspector III/ CMM Programmer
Overview:
The Quality Control Inspector/Programmer is responsible for visual and dimensional inspections on manufactured parts, assemblies, and/or sub-assemblies. This role inspects parts to engineering drawings, customer purchase order(s), work orders, industry standards, and specifications. The inspector may report detailed inspection accept / reject information directly to the customer with shipments.
Minimum Required Qualifications :
- Technical school diploma or equivalent combination of education and experience.
- Minimum 5-7 years' experience with Mechanical / Electronic part inspection in a manufacturing or production Environment.
- Experience in quality with machined / mechanical parts using GD&T interpretation, able to do programs for automatic inspection with Optical Vision Systems and CMMs. plus. Able to use Profilometers and special Microscopes for visual characteristics with other measuring tools and instruments.
- Knowledgeable with AS9102 FAIR (First Article Inspection Report) documentation and Inspection.
- Familiar with AQL, sampling methods and traceability.
- Strong verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, as well as any and all outside agents, including but not limited to; vendors, suppliers, customers, etc.
- Strong computer literacy, with MS Office/PC expertise and demonstrated experience with applicable systems, programs, equipment, etc.
- Must be a US Citizen.
Essential or Primary / Key Responsibilities :
- Train other inspection personnel on CMM software and manual measurement techniques.
- Perform Mechanical measurements and visual quality assessments of received items, work-in-progress and finished goods.
- Performs 1 st Piece Inspection on machined parts and inspection for product Quality Analysis.
- Inspect with thread gages, GO/NO-GO plug gages, V-Blocks, Gage Blocks, height stands, dial indicators, various types of ID/OD micrometers, inspection of thread Pitch Diameter with special gages.
- Generate spreadsheets for data collection, evaluate history of product and recommend on Sample Size as per an AQL
- Reconcile final inspection documentation for shipments
- Interact with source inspector as needed and part-take in source inspection duties if necessary.
- Read, understand and interpret Mechanical/Electronic drawings.
- Approve incoming materials by confirming specifications, conducting visual and physical measurement of the product., rejecting if necessary and processing part thru to the next step.
- Approve in-process production by confirming specifications, conducting visual, physical measurement and physical measurement of the product., communicating required adjustments to production supervisor.
- Approve finished products by confirming specifications, conducting visual and physical measurement of the product.
- Document inspection results by completing reports and logs, summarizing re-work and waste, and inputting data into quality database
- Always verify equipment is operational and calibrated, follow operating instructions and coordinate repairs
- Work with Engineering, Operations, and other sources to resolve issues and meet goals
Additional Duties / Responsibilities :
- Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required).
- Maintain and continue to elevate relationships with Business Development, Engineering, Operations, Customer Service and all other facets of the company
- Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements
- Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization
- Actively participate in team meetings, improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support company initiatives/goals
- Consistently demonstrate commitment to company values
- Keep management informed of area activities and of any significant problems
- Assume responsibility for related duties as required or assigned
- Ensure that work area and work areas of direct reports are clean, secure, and well maintained
- Complete special projects and miscellaneous assignments as required
Work Environment :
- While performing the duties of this job, the employee can be exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment may be loud.
- This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required).
- This is a full-time position. Overtime and weekend work may be required as job duties demand.
- Travel is rare but may be required to coordinate proper CMM inspection techniques with Suppliers.
.
Physical Requirements :
- While performing the duties of this job, the employee is regularly required to talk and hear.
- Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Vision and color vision must pass job-required vision screening
- The employee is occasionally required to sit; climb or balance; and stoop, kneel, or crouch
The employee may be required to lift and/or move items weighing up to 25 pounds.
This position is at our Montville, NJ office location.
Pay Range: $30.50 - $38.00/hour
Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts.
At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed.
Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency.
Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture.
If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at ARE ENCOURAGED TO APPLY
No agencies, please.
Pay Range: $30.50 - $38.00 per hour
Description
At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.Please note that this opportunity is contingent on program funding. Start dates are determined after funding confirmation.
Northrop Grumman Aeronautics Systems sector is hiring a Senior Principal Guidance Navigation and Controls Engineer to join our Vehicle Engineering team of qualified, diverse individuals in Melbourne, Florida.
Responsibilities may include:
- Lead the Guidance, Navigation, and Control system engineering requirement maturation
- Lead the integration of autopilot and auto throttle capabilities into the Vehicle Management System
- Lead subsystem level certification activities
Basic Qualifications
- Bachelor of Science (BS) in a Science, Technology, Engineering, or Mathematics (STEM) discipline and 8 years of relevant experience; OR Master of Science (MS) in a STEM discipline and 6 years of relevant experience
- Your ability to transfer and maintain the final adjudicated government Secret clearance (DoD must be in-scope or enrolled in Continuous Evaluation) and any program access(es) required for the position within a reasonable period of time, as determined by the Company.
- Knowledge of fixed-wing aircraft dynamics
- Knowledge of fly-by-wire control systems
- Experience in system engineering requirement definition, verification, and validation
- Experience analyzing non-linear simulations of aircraft closed-loop responses
- Experience creating certification test procedures and test cases
- Working knowledge of autopilot and autothrottle capabilities into Vehicle Management Systems
- Working knowledge of Flight Management Systems, including RNAV
- Experience using MATLAB to create, process, analyze, and visually represent data.
- Experience using Simulink to model dynamic systems.
- Experience using Model Based System Engineering tools
- Familiarity with programming (C/C++, Python)
Preferred Qualifications
- Experience developing and integrating autopilot and autothrottle capabilities into Vehicle Management Systems
- Experience with Flight Management Systems, including RNAV
- Experience using CAMEO to create system requirement models
- Experience using System Composer to create software architecture
- Experience with MIL-STD-1797B
- Experience with AS94900 or MIL-STD-9490
- Experience with DO-178C
- Experience for Atlassian tool suite (Jira, Confluence, Bitbucket)
#AS-FA3
Primary Level Salary Range: $122,800.00 - $184,200.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.Immediate placement available.
Pay: We pay a competitive standard flat fee per case based on customer as well as inspection type and complexity. The dominant standard flat fee range is $60 - $75, with some exceptions.
Job Type: Independent Contractor
QualificationsWe are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as the VIITA Basic Commercial Line Inspector course or its equivalent.
Full Job Description Of The Loss Control Inspector- Receives assignments electronically and reviews for inspection requirements.
- Schedules the inspection appointment with the Insured by phone, email, or text.
- Inspects the property for potential issues or hazards pertaining to utilities/building systems (heating, wiring, plumbing), common areas, maintenance, protections, and life safety, etc. Take 20-35 exterior/interior photos. Take measurements with a measuring wheel or with online tools as needed.
- Interviews the Insured for operations information, ages of the building systems, etc.
- Communicates inspection status through online application.
- Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. Returns the completed report electronically (the reports consist of check-off questions, narrative, and digital photos).
- 3-5 years' experience providing commercial insurance loss control inspections
- Understanding of commercial property and casualty lines: property, general liability, and worker's compensation
- Ability to work independently, manage your time effectively, and communicate well verbally and in writing
- Comfortable completing reports online and uploading documents
commercial building inspection ~ fire safety ~ industrial safety ~ environmental safety ~ construction work ~ customer service ~ online reporting and document handling ~ ability to travel approximately a 50-mile radius
Helpful (But Not Required) Professional CertificationsCSP, OHST, ALCM, ARM
H&S Loss Control Inspections, Inc Company InformationWe have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Our friendly support staff are available to help you by assigning orders and assisting with questions. Despite the challenges presented by recent events, H&S has been continuing to grow and successfully serve our customers with excellent reports and time service!
We look forward to hearing from all qualified applicants!
Immediate placement available.
Pay: We pay a competitive standard flat fee per case based on customer as well as inspection type and complexity. The dominant standard flat fee range is $60 - $75, with some exceptions.
Job Type: Independent Contractor
QualificationsWe are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as the VIITA Basic Commercial Line Inspector course or its equivalent.
Full Job Description Of The Loss Control Inspector- Receives assignments electronically and reviews for inspection requirements.
- Schedules the inspection appointment with the Insured by phone, email, or text.
- Inspects the property for potential issues or hazards pertaining to utilities/building systems (heating, wiring, plumbing), common areas, maintenance, protections, and life safety, etc. Take 20-35 exterior/interior photos. Take measurements with a measuring wheel or with online tools as needed.
- Interviews the Insured for operations information, ages of the building systems, etc.
- Communicates inspection status through online application.
- Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. Returns the completed report electronically (the reports consist of check-off questions, narrative, and digital photos).
- 3-5 years' experience providing commercial insurance loss control inspections
- Understanding of commercial property and casualty lines: property, general liability, and worker's compensation
- Ability to work independently, manage your time effectively, and communicate well verbally and in writing
- Comfortable completing reports online and uploading documents
commercial building inspection ~ fire safety ~ industrial safety ~ environmental safety ~ construction work ~ customer service ~ online reporting and document handling ~ ability to travel approximately a 50-mile radius
Helpful (But Not Required) Professional CertificationsCSP, OHST, ALCM, ARM
H&S Loss Control Inspections, Inc Company InformationWe have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Our friendly support staff are available to help you by assigning orders and assisting with questions. Despite the challenges presented by recent events, H&S has been continuing to grow and successfully serve our customers with excellent reports and time service!
We look forward to hearing from all qualified applicants!
Pay: We pay a competitive standard flat fee per case based on customer as well as inspection type and complexity. The dominant standard flat fee range is $60 - $75, with some exceptions.
Job Type: Independent Contractor
QualificationsWe are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as the VIITA Basic Commercial Line Inspector course or its equivalent.
Full Job Description of the Loss Control Inspector- Receives assignments electronically and reviews for inspection requirements.
- Schedules the inspection appointment with the Insured by phone, email, or text.
- Inspects the property for potential issues or hazards pertaining to utilities/building systems (heating, wiring, plumbing), common areas, maintenance, protections, and life safety, etc. Take 20-35 exterior/interior photos. Take measurements with a measuring wheel or with online tools as needed.
- Interviews the Insured for operations information, ages of the building systems, etc.
- Communicates inspection status through online application.
- Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. Returns the completed report electronically (the reports consist of check-off questions, narrative, and digital photos).
- 3-5 years' experience providing commercial insurance loss control inspections
- Understanding of commercial property and casualty lines: property, general liability, and worker's compensation
- Ability to work independently, manage your time effectively, and communicate well verbally and in writing
- Comfortable completing reports online and uploading documents
commercial building inspection ~ fire safety ~ industrial safety ~ environmental safety ~ construction work ~ customer service ~ online reporting and document handling ~ ability to travel approximately a 50-mile radius
Helpful (but not required) Professional CertificationsCSP, OHST, ALCM, ARM
H&S Loss Control Inspections, Inc Company InformationWe have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Our friendly support staff are available to help you by assigning orders and assisting with questions. Despite the challenges presented by recent events, H&S has been continuing to grow and successfully serve our customers with excellent reports and time service!
We look forward to hearing from all qualified applicants!
Immediate placement available.
Pay: We pay a competitive standard flat fee per case based on customer as well as inspection type and complexity. The dominant standard flat fee range is $60 - $75, with some exceptions.
Job Type: Independent Contractor
QualificationsWe are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as the VIITA Basic Commercial Line Inspector course or its equivalent.
Full Job Description Of The Loss Control Inspector- Receives assignments electronically and reviews for inspection requirements.
- Schedules the inspection appointment with the Insured by phone, email, or text.
- Inspects the property for potential issues or hazards pertaining to utilities/building systems (heating, wiring, plumbing), common areas, maintenance, protections, and life safety, etc. Take 20-35 exterior/interior photos. Take measurements with a measuring wheel or with online tools as needed.
- Interviews the Insured for operations information, ages of the building systems, etc.
- Communicates inspection status through online application.
- Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. Returns the completed report electronically (the reports consist of check-off questions, narrative, and digital photos).
- 3-5 years' experience providing commercial insurance loss control inspections
- Understanding of commercial property and casualty lines: property, general liability, and worker's compensation
- Ability to work independently, manage your time effectively, and communicate well verbally and in writing
- Comfortable completing reports online and uploading documents
commercial building inspection ~ fire safety ~ industrial safety ~ environmental safety ~ construction work ~ customer service ~ online reporting and document handling ~ ability to travel approximately a 50-mile radius
Helpful (But Not Required) Professional CertificationsCSP, OHST, ALCM, ARM
H&S Loss Control Inspections, Inc Company InformationWe have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Our friendly support staff are available to help you by assigning orders and assisting with questions. Despite the challenges presented by recent events, H&S has been continuing to grow and successfully serve our customers with excellent reports and time service!
We look forward to hearing from all qualified applicants!
Immediate placement available.
Pay: We pay a competitive standard flat fee per case based on customer as well as inspection type and complexity. The dominant standard flat fee range is $60 - $75, with some exceptions.
Job Type: Independent Contractor
QualificationsWe are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as, the VIITA Basic Commercial Line Inspector course or its equivalent.
Full Job Description Of The Loss Control Inspector- Receives assignments electronically and reviews for inspection requirements.
- Schedules the inspection appointment with the Insured by phone, email, or text.
- Inspects the property for potential issues or hazards pertaining to utilities/building systems (heating, wiring, plumbing), common areas, maintenance, protections, and life safety, etc. Take 20-35 exterior/interior photos. Take measurements with a measuring wheel or with online tools as needed.
- Interviews the Insured for operations information, ages of the building systems, etc.
- Communicates inspection status through online application.
- Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. Returns the completed report electronically (the reports consist of check-off questions, narrative, and digital photos).
- 3-5 years' experience providing commercial insurance loss control inspections
- Understanding of commercial property and casualty lines: property, general liability, and worker's compensation
- Ability to work independently, manage your time effectively, and communicate well verbally and in writing
- Comfortable completing reports online and uploading documents
commercial building inspection ~ fire safety ~ industrial safety ~ environmental safety ~ construction work ~ customer service ~ online reporting and document handling ~ ability to travel approximately a 50-mile radius
Helpful (But Not Required) Professional CertificationsCSP, OHST, ALCM, ARM
H&S Loss Control Inspections, Inc Company InformationWe have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Our friendly support staff are available to help you by assigning orders and assisting with questions.
Despite the challenges presented by recent events, H&S has been continuing to grow and successfully serve our customers with excellent reports and time service!
We look forward to hearing from all qualified applicants!
Now Hiring: HVAC Controls Technician
Location: St Louis, Missouri
Schedule: Full-time | Flexible Hours (7:30 AM – 4:30 PM typical shift)
About the Role
We’re looking for a motivated and skilled HVAC Controls Technician to join our growing team! An HVAC Controls Technician is responsible for programming, troubleshooting, startup, checkout, and servicing of Building Automation Systems (BAS). Key duties include configuring and optimizing system performance, diagnosing and resolving issues, and ensuring proper integration of HVAC controls. The technician will also work closely with project teams, contractors, and clients to ensure seamless operation and functionality of the BAS. Strong technical expertise in control systems, problem-solving skills, and the ability to work independently in field environments are essential for this role. If you enjoy hands-on problem-solving, working with advanced control systems, and seeing your work directly impact performance — this opportunity is for you. This full-time position offers flexible scheduling, typically with 8-hour shifts during office hours (7:30 AM – 4:30 PM).
What You’ll Do
- Program, configure, and optimize Building Automation Systems (BAS).
- Perform startup, checkout, and commissioning for new projects.
- Troubleshoot control issues and resolve HVAC system integration challenges.
- Conduct point-to-point verification and ensure systems meet design specifications.
- Assist with field service calls during project and warranty phases.
- Guide and support electrical subcontractors on project sites.
- Deliver materials, monitor installations, and maintain communication with the project team.
- Update and correct manual drawings for engineering and documentation accuracy.
- Participate in the on-call rotation and assist with support agreements.
- Collaborate with management to develop a personalized professional growth plan.
What We’re Looking For
- Strong time management and problem-solving skills
- Excellent communication and customer service mindset
- Action-oriented and dependable under pressure
- Understanding of HVAC systems, electrical wiring diagrams, and basic networking
- Positive, team-oriented attitude
- Valid driver’s license and ability to pass a background check and drug screening
Nice to Have:
- 1+ years of experience in HVAC, Electrical, or Automation systems
- Advanced computer or networking skills
- Associate’s or Technical Degree in HVAC, Electrical, or Automation
What We Offer
We believe great work deserves great rewards — that’s why we invest in your success and well-being:
Health & Wellness
- 100% Employer-Paid Medical, Dental & Vision Insurance for Employees
- Life Insurance
- FSA/HSA Accounts
- Short & Long-Term Disability
- Employee Assistance Program
- Fitness Reimbursement
Career & Financial Benefits
- Simple IRA Retirement Plan
- Tuition Reimbursement & Paid Training Opportunities
- Bonuses & Overtime Opportunities
- Growth potential – We love to promote from within!
- Boot Credit
Work-Life Balance
- Paid Time Off, Paid Holidays & Personal Time
- Flexible Schedule & Parental Leave
- Company Vehicle, Phone, and Fuel Expenses
- On-Call Incentives
- Fun and Collaborative Team Culture
Join a company where your work truly powers performance.
If you’re ready to take your HVAC controls career to the next level with a team that values growth, collaboration, and innovation — we’d love to hear from you!
Apply today and start building smarter with us.
