N Able Take Control Jobs in Usa

Title

Electrical Controls Engineer/Industrial Electrician

Report to

Facility/Engineering Director.

Job Summary

Individual must be able to perform design,engineering, and field start up responsibilities for System Integration in the Electrical Controls Industry. In addition, proven trouble

shooting skills are necessary.

Job Duties / Responsibilities

• Design, fabricate, and install PLC based process control panels.
• Troubleshoot and upgrade existing control panels.
• Maintain inventory of all PLC/HMIrack systems and programs.
• Work to install110V, 220V, and 480V 3 phase wiring.
• Real electrical schematics and wiring diagrams.
• Be able to troubleshoot 480V electrical control systems.
• Specify wiring and motor controls for 480V systems.
• Install power distribution and protection systems.
• HMI Interfaces
• Temperature Controllers and Transmitters
• Pressure Transmitters
• 4-20ma Loop Controllers
• Burner Controllers and Actuators
• Industrial pH Meters
• Level Transmitters
• Flow Meters
• Variable Frequency Drives

Work Conditions

• Physically available to lift up to 50lb.
• Exposure to hazardous conditions associated with the Company
• 24/7 availability may be required.
• Manual dexterity and the ability to remain standing, crouching, and bending for long periods of time
• Overtime as needed.

Job Requirements

• AS, BSEE, BSEET, or technical degree.
• 3-5 years of industry experience.
• Review projects including quotes, job specifications, and resolve any quote to job specifications differences.
• System Architecture including non-standard material and control pane lpower requirements/distribution.
• Review specifications and standard practices – inclusive of the internal hardwired and logic standards, general specifications and scope of work.
• Design requirements which include establishing non-standard designs, generating system map layouts, generating a sequence of operations, reviewing cycle time

studies and dimension switch layouts, generation of design packages, design logic, enter logic, and the design of Smart Displays.

• Material responsibility includes advance material order, specifying Mod Box material, specifying Panel material, writing Mod Box EBMs and writing panel material EBMs.
• Assisting with installation • Debugging with no additional support • Launchand Standby
• As Builts

Technology Requirements

• RSLogix 5, 5000
• RS Networx for DeviceNet, ControlNet, EtherNet IP
• DriveExecutive, DriveExplorer

• PanelBuilder PDS, 1400e, 32
• RSView Studio
• Trouble Shooting PID Loops
• Calibrating Process Control Equipment
• Microsoft Office Suite

Benefits

• Competitive Compensation

- 401(k)

• 401(k) Matching
• Medical, Dental,and Vision Benefits
• Paid Time Off and Paid Holiday’s

Classification

Full Time Position

Why Work With Us:

We offer a best-in-class work environment for our team, supporting their professional growth while providing a challenging, exciting, and safe workplace. From offering a robust benefits package to generous annual performance bonuses, PTO, and more, we live our core values—teamwork, resiliency, and integrity—reflecting our long-term commitment to our employees, communities, and the environment.

Position Overview:

We are seeking a Process Control Technician Specialist to provide hands-on support for the process control systems that drive our metal, alloy, and component-making facility. This role is designed for a skilled technician with experience in troubleshooting and maintaining PLCs, HMIs, and industrial process control systems.The ideal candidate will support daily plant operations, lead equipment-based improvements, and contribute to the implementation of OPEX projects and continuous improvement initiatives across a complex, high-tech manufacturing environment.

Essential Duties:

• Provide hands-on technical support for plant process control systems, including routine checks, basic maintenance, and troubleshooting equipment or system faults.
• Provide daily technical support for plant process control systems, including troubleshooting and maintaining PLCs, HMIs, VFDs, sensors, and safety systems to ensure smooth and safe operations.
• Respond to process control-related issues as part of an on-call rotation,including after-hours support as needed.
• Assist in implementing and maintaining standard operating procedures for process control systems and support response protocols.
• Support troubleshooting efforts led by engineers to minimize downtime and ensure continuous improvement of system performance.
• Document and report system issues,maintenance actions, and resolution outcomes to engineering leadership.
• Perform routine inspections of process control equipment to identify and report wear,potential failure points, or improvement opportunities.
• Support continuous improvement (CI) and OPEX projects by implementing changes to process control systems, improving equipment functionality, and reducing downtime.
• Perform hands-on installation, testing, and calibration of process control components—such as instrumentation, control panels, and field devices.
• Read, interpret, and redline electrical schematics, P&IDs, panel layouts, and wiring diagrams for existing or modified systems.
• Support the programming, configuration, and maintenance of process control platforms including Rockwell (Studio 5000), FactoryTalk View, and Siemens TIA Portal.
• Conduct preventive and predictive maintenance of process control systems; perform software backups, maintain change logs, and document all control system activities.
• Interface regularly with operators, maintenance, engineering, and EHS teams to ensure process control systems meet operational and safety requirements.
• Assist with commissioning and startup of new or modified process control systems, ensuring compliance with performance specifications.
• Use diagnostic tools (e.g., multimeters, oscilloscopes, network analyzers) to test and troubleshoot control signals and communications.
• Collaborate with other technicians, operators, and engineering staff to support safe, efficient plant operations.
• Support training efforts for maintenance and operations staff to improve system knowledge and troubleshooting capabilities.

Basic Qualifications:

• Associate degree or equivalent technical certification in Electrical Engineering Technology, Industrial Automation, Mechatronics, or a related field.
• 3+ years of hands-on experience working with PLC and HMI-based process control systems in an industrial or manufacturing environment.
• Proficiency in reading, interpreting, and modifying control system documentation such as electrical drawings and schematics.
• Hands-on experience with Rockwell (Allen-Bradley), Siemens, or similar process control platforms.
• Familiarity with industrial communication protocols: EtherNet/IP, Profinet, Modbus TCP.
• Comfortable working in an industrial environment with chemical,mechanical, and thermal processes.
• Experience using diagnostic tools such as multimeters, loop calibrators, and signal simulators.

Desired Qualities:

• 5+ years of process control or automation experience in a manufacturing setting.
• Proactive, self-motivated, and comfortable taking ownership of process control-related issues.
• Strong troubleshooting skills with an analytical approach to solving electrical/control problems.
• Familiarity with robotics, vision systems, or motion control technologies is a plus.
• Comfortable balancing multiple priorities and adapting to dynamic production demands.
• Basic CAD skills for modifying electrical schematics (AutoCAD Electrical preferred).
• Knowledge of SCADA systems and virtualized environments is a plus.
• Excellent verbal and written communication skills; able to clearly document work and collaborate across departments.
• Advanced proficiency in Microsoft Office tools, especially Excel and Outlook.

CentiMark Corporation is the nation's largest commercial/industrial roofing contractor with over 100 offices and 3,500 employees. We have an exceptional opportunity for a full-time Onsite Quality Control Representative to support our crews in the Phoenix area with our DataCon Division.

This role is paying $25/hr - $30/hr + Overtime + Premier Benefits!

The Quality Control Representative monitors and evaluates the workmanship on large new construction projects. They will spot check projects during installs and ensure that the crews are following the installation specification set forth by the management and perform all final quality control checks of every project once they are completed.

Job Summary:

• Perform all planned and random inspections of jobs in production daily
• Be responsible for documenting all onsite visits
• Enforce all company and manufacturer installation specifications
• Monitor and address violations of OSHA safety guidelines
• Assure to the best of their ability that all materials, workmanship, and construction are in full compliance with the contract plans
• Pick up additional needed material and deliver it to the jobsite as needed
• Conduct final QC inspection
• Report major installation errors to the Construction Manager
• Participate in all subcontractor and production department meetings
• Take in progress photos when needed and upload to CRM daily
• Take after photos of all installs and repairs daily

Candidate Requirements:

• 5+ years commercial roofing experience preferred
• Construction safety knowledge preferred
• Capability of interpreting blueprints is a plus
• Able to lift 50 lbs. & climb up & down ladders to minimum heights of 25 feet
• Team player that can work in a fast-paced, deadline driven, collaborative environment
• Valid driver's license (in good standing)
• Bilingual (English/Spanish) speaking is preferred
• Travel required to work site locations

Premier Benefits:

• 2 Health Insurance Plans: No Cost \"Core Plan\" No Cost Medical & Dental
• Buy Up Plan Features a lower deductible for Medical
• Vision Plan
• Employer Paid Life & AD&D Insurance
• Traditional 401K with Company Match
• Roth 401K with Company Match
• Paid Holidays and Vacation
• Employer Provided Employee Stock Ownership Program (ESOP)
• Company Vehicle, Fuel Card
• Flexible Spending Account (FSA)
• Weekly Pay
• Referral Bonuses
• Dayshift Hours
• Growth Opportunities

CentiMark provides a great work environment with challenging career opportunities. Drug Free Workplace - EOE (M/F/V/D) - E-Verify Employer

Weeks Group, LLC is a leading construction firm specializing in the development of advanced data center facilities. With a strong commitment to innovation, quality, and client satisfaction, we deliver cutting-edge solutions that address the dynamic needs of the data center industry. As we continue to expand, we are seeking a skilled and experienced Data Center Construction QAQC Manager to join our dream team. We are not headhunters. We don't just put butts in seats. We are a dream team of experts in the industry to thrive from solving problems and getting things done!

Weeks Group's Values:

We Answer the Call

Integrity- Honesty-Trust- Nimbleness

We Don’t Take No for an Answer

Persistence- Determination- Accountable

We Solve Problems

We Work Hard and Reward Well

Within Challenging, Intense Projects

We Expect the Best from Each Other

Teamwork- Communication

We BTFM

Innovative- Disdain for Mediocrity

If you don't have data center experience or don't align with our values, no need to apply.

Employment Type: Full-time-Traveling position option

Project Type: Hyperscale / Mission Critical Data Centers – Brownfield (live campus / retrofit / expansion)

Reports To: Project Director / Director of Construction Operations

Role Summary

We’re hiring an On-Site QA/QC Manager to lead the quality program on brownfield hyperscale data center construction—where safety, uptime, and precision matter as much as speed. You’ll own electrical QA/QC planning and execution, drive rigorous documentation, and ensure installations meet strict client standards, contract requirements, and code while working in/around live critical environments. This role supports readiness for energization, commissioning, and IST with strong change control and zero-surprise turnover.

What You’ll Do

• Own and maintain the Project Quality Plan (PQP) tailored for brownfield constraints (phasing, outages, access controls, change control).
• Build and manage electrical Inspection & Test Plans (ITPs), checklists, and hold/witness points—by system, room, and phase.
• Lead daily QA/QC field execution and verification against IFC drawings, approved submittals, vendor IOMs, RFIs, and method statements.
• Drive quality for the electrical critical path, including (as applicable):
• MV/LV distribution: switchgear, transformers, breakers, relays, terminations
• UPS/battery systems: installation verification, clearances, labeling, startup readiness
• Generators/paralleling gear: interface readiness, documentation capture, punch closure
• Busway/PDUs/RPPs: supports, alignment, tap boxes, labeling, grounding/bonding
• Cable tray/conduit: routing, supports, firestopping, separation, workmanship standards
• Grounding & bonding: integrity verification and as-built accuracy
• Controls/EPMS/BMS electrical interfaces: device placement, labeling, point-to-point readiness (as assigned)
• Enforce brownfield-specific quality disciplines:
• Verify phasing plans and temporary power installs meet requirements
• Maintain as-built accuracy in real time due to live site impacts and field changes
• Coordinate quality gates tied to shutdown windows, cutovers, and turnover milestones
• Manage deficiency systems: NCRs, punch lists, rework prevention, corrective/preventive action (CAPA), re-inspections, and verified closeout.
• Partner tightly with Operations, Controls, Commissioning, and Safety to ensure quality supports uptime protection and controlled energization.
• Own electrical turnover packages: inspection reports, test results, redlines/as-builts, O&Ms, training logs, vendor startup documentation, commissioning support documentation.
• Provide weekly reporting: trends, repeat issues, risk register inputs, and 2–6 week quality look-ahead tied to phasing and outage schedules.

Qualifications

• 7+ years QA/QC experience on mission critical construction with strong electrical focus; brownfield/live siteexperience strongly preferred.
• Proven success running PQP/ITP programs, NCR/punch systems, and turnover documentation on fast-track or phased retrofits.
• Strong ability to interpret one-lines, schematics, control wiring diagrams, specs, and vendor documentation.
• Working knowledge of NEC/NFPA 70 and typical hyperscale QA requirements (labeling standards, documentation rigor, readiness gates).
• Highly organized, strong communicator, and able to coordinate across multiple trades, vendors, and stakeholders in a controlled environment.

Preferred

• Experience supporting cutovers, shutdown windows, energization planning, commissioning readiness, and IST
• Familiarity with NFPA 70E-related interfaces and verification of torque/labeling/test documentation programs
• Certifications: CQM-C, ASQ (CQA/CQE), OSHA 30
• Tools: Procore, ACC/BIM 360, Bluebeam, PlanGrid

What Success Looks Like

• Zero “surprise” quality issues during shutdown windows and cutovers
• Electrical systems pass startup/commissioning on first attempt
• NCR/punch stays controlled and closes quickly ahead of milestones
• Turnover packages are complete, accurate, and accepted without rework

Benefits

• Competitive compensation + bonus potential
• Health/dental/vision, 401(k), PTO
• Per diem/vehicle allowance (if applicable)
• Growth path within hyperscale mission critical delivery

Work Control Planner 2

Job Posting ID: JP3180

Location: Los Alamos, NM – TA-55

Citizenship: US Citizenship Required

Clearance: Active Q Clearance preferred (Not required to start)

Salary: $55/hr - $60/hr

Work Schedule: Full-time, 4/10s shift

Assignment Duration: 1 year (possibility of extension/conversion)

Mandatory Experience Requirement – Read Before Applying

Candidates must meet the following requirements:

• Bachelor’s degree and a minimum of 5 years of relevant experience (or an equivalent combination of education and experience)
• Must be able to work onsite 100% at TA-55, supporting rotating shifts, including early mornings, evenings, weekends, and holidays

Applications that do not demonstrate these requirements will not be considered.

Impact

As a Work Control Planner 2, you will play a critical role in ensuring the safe and efficient planning and execution of maintenance, operations, and modifications at LANL’s TA-55 facility. Your work will directly support national security missions and the successful operation of highly secure nuclear facilities.

Responsibilities and Duties

• Develop and/or review work packages that include labor estimates, material needs, safety and testing requirements, and step-by-step work instructions
• Ensure compliance with facility policies and procedures related to mechanical, electrical, chemical, and radiological systems
• Collaborate closely with execution teams to resolve work restraints
• Support implementation of the PF4SHIFTS execution plan
• Bring work packages to final closure and provide documentation for quality assurance and auditing

Minimum Qualifications

• Bachelor's degree and a minimum of five (5) years of related experience
• Ability to obtain Q Clearance (not required to start)
• Must be able to work one of the rotating shifts (A, B, C, or D)
• Experience developing technical procedures and safety documentation
• Familiarity with secure operations and classified environments

Desired Skills

• Familiarity with software tools such as MWP, P-6, and Asset Suite
• PPA certification (preferred but not required)
• Previous experience supporting glovebox installation and ALD-PI operations
• Strong understanding of DOE and LANL safety and work control protocols

Education and Experience Requirements

• Bachelor’s degree and at least five years of directly related experience
• Equivalent combinations of education and experience will be considered

Why Work at COMPA Industries?

We strive to provide careers, not just jobs. COMPA invests in and serves the communities where we work and live. We provide best-in-class administrative, professional, and technical services to solve complex problems and meet customer mission-critical objectives.

For over 30 years, COMPA has been a trusted partner in progress, combining deep technical expertise with a forward-thinking spirit. Join us and build your future with competitive compensation, a collaborative culture, and the opportunity to make a lasting impact on national security.

JOB SUMMARY

The position is broadly responsible for the development of electrical and process control systems for equipment used in the Food Processing, Pharmaceutical, Chemical, Water Treatment, Manufacturing and other industries.

Essential Functions

Essential Function

Understanding of customer’s specific application and process requirements

Developing instrumentation lists, electrical wiring schematics, Bill of Materials, control panel layout, one line and point-to-point wiring diagrams.

PLC and SCADA programming

Preparing budgetary cost estimates

Supervising fabrication of control systems, performing factory and site checkout

Managing and physically participating in equipment and systems installation and startup

Developing and maintaining project documentation: drawings, Bill of Materials and equipment IOM manuals

Providing post-installation troubleshooting and technical support

Required for All Jobs

• Performs other duties as assigned

• Complies with all policies and standards

QUALIFICATIONS

Education

Education Level Education Details Req/

Pref

Associate's Degree

Bachelor's Degree Mechanical, chemical, or electrical engineering Required

Work Experience

Experience Experience Details Required/

Preferred

1-3 years

4-6 years

7-9 years

10+ years Experienced hands-on project manager with excellent electrical controls engineering, AutoCAD, PLC/SCADA programming, technical writing, and communication skills Required

Knowledge, Skills and Abilities

Industrial gases industry experience would be helpful. Good English writing and speaking skills are required.

Experienced hands-on project manager with excellent electrical controls engineering, AutoCAD, technical writing, and communication skills

Ability to read, understand and create electrical drawings, block diagrams and P&ID’s

Experience in process automation, instrumentation, and PLC/SCADA systems

Comprehensive experience programming Allen-Bradley CompactLogix, ControlLogix, WonderWare and Siemens PLCs and HMI

Working knowledge of motors, blowers, pumps, and compressors

Familiarity with NEC and NFPA standards

Licenses and Certifications

Licenses/Certifications Licenses/Certification Details Time Frame Required/

Preferred

PHYSICAL DEMANDS/WORKING CONDITIONS

Physical Demands Category:

Physical Demands

A thorough completion of this section is needed for compliance with legal standards such as the Americans with Disabilities Act. The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Physical Demand N/A Rarely Occasionally Frequently Constantly Weight

Stationary Position X

Move/Traverse X

Stationary Position/Seated X

Transport/Carrying X

Exerting Force/Pushing X

Exerting Force/Pulling X

Ascend/Descend X

Balancing X

Position Self/Stooping X

Position Self/Kneeling X

Position Self/Crouching X

Position Self/Crawling X

Reaching X

Handling X

Grasping X

Feeling X

Communicate/Talking X

Communicate/Hearing X

Repetitive Motions X

Coordination X

Travel Requirements

Estimated Amount Brief Description

50% Extensive domestic travel will be required

Direct Hire Opportunity!

Senior Automation & Controls Engineer - Food & Beverage Qualifications:

• Bachelor Degree in Controls, Electrical, Mechanical or Chemical Engineering or related degree from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam and 7 years electrical engineering experience
• EPC project and Automation 7 Controls experience preferred
• Master Degree in Electrical Engineering and 6 years electrical engineering experience
• EPC project experience preferred
• Expert knowledge in standard engineering techniques and procedures
• Strong knowledge of electrical equipment design ANSI and IEEE Standards. Strong computer skills (e.g. Microsoft Office Suite)
• Excellent written and verbal communication skills
• Experience with leading the discipline design for large projects and delegating work tasks to team members
• Ability to lead execution of work and resolve issues in a team environment
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills
• Ability to perform quality reviews for detailed engineering documents and specifications
• Ability to travel. accredited program
• Must have or be able to obtain a Transportation Worker Identification Card (TWIC)
• Professional Engineer (PE) License Preferred
• This position requires an individual capable of applying intensive and diversified knowledge of principles and practices to broad areas of assignment
• Must be capable of devising new approaches to problems encountered
• Ability to perform quality reviews for detailed engineering documents and specifications
• Knowledge of applicable design standards covering Automation & Controls Design/Engineering such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A
• Experienced with variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS)
• Experience in Rockwell and Siemens PLC platform. Experience in GE, Modicon, Opto22, Mitsubishi, and Triconex PLC platforms a plus
• SCADA experience with Factory Talk and Wonderware local and distributed systems, Ignition Software is a plus
• MES Design and Implementation Experience a Plus, PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS
• Machine safety risk assessment and required PL design compliance to ISO13849 is a plus
• Process safety SIF/SIS design compliance to ISA/IEC 61511 is a plus
• Experience with PlantPAX and PackML is preferred
• Familiarity with tools like SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired

Senior Automation & Controls Engineer - Food & Beverage Description:

• Responsible for compliance with company and project site safety policies
• Design responsibility for all Automation and Controls scope on the project
• Leads a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design
• Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines
• Responsible for leading and developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization
• Responsible for commissioning and startup of those design deliverables
• Lead and prepare controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details
• Lead the specification, design, and procurement activities for control panel and equipment vendors, manage vendor progression, and lead the Factory Acceptance Tests (FATs)
• Lead and prepare electrical design deliverables including 480VAC and below equipment and motor power design, installation plan drawings, and conductor schedules
• Determine process instrument measurements protocols, such as temperature, pressure, flow, level, analyzers, and control valves. Utilize knowledge of various technologies for selecting the appropriate controls application
• Experienced in reviewing P&IDs and working with process engineers to define and show proper controls scope of the project
• Develop and manage verification of design, calculations, project studies and report preparation
• Interfaces directly with offsite design office and coordinates and tracks execution of controls deliverables to that office
• Responsible for leading and performing quality reviews of project design submittals and coordinating those reviews within the department
• Responsible for applying knowledge of commonly used automation and controls engineering/design concepts, principles, practices, codes, and procedures within the engineering services industry
• Interfaces directly with construction personnel in development of contracts and execution of work
• Develops project estimates at each project phase through various software such as Proposal works, Integrated Architecture Builder (IAB), SIL Solver, Bluebeam, Excel, and Visio
• Supports project manager in the development and tracking of automation and controls project budgets and expected progress
• Works with clients and vendors directly in developing design
• Builds effective relationships with existing clients, customers and contractors and develop new business opportunities
• Responsible for ensuring customer satisfaction goals and expectations are met
• Has a list of clients that frequently request them for projects or assistance
• Provides leadership, technical direction and development to Automation and Controls team members
• Assists in the day-to-day allocation of resources to their projects
• Coordinate with field personnel to resolve design related installation issues, calculations, field inspections and testing of controls systems
• Responsible for leading the technical execution and team during onsite start-up and commissioning activities
• Responsible for developing and submitting discipline change notices as needed to the project management team
• Fully understands and can execute the EPC project approach
• This position will require making trips to job sites to survey, support installations, and lead startups (travel about 30%)
• Work with our business development team to identify and develop key project and customer pursuits
• Frequently attends and hosts client events
• Develops business strategies for future projects
• Understands business needs and profitability factors
• Reviews and develops engineering hour estimates and proposals for all phases of the project
• Supports interviewing and hiring process for new team members
• Coordinates workload with Automation and Controls Department Manager
• Complies with all company policies and standards
• All other duties as assigned

Domino's Pizza is seeking an enthusiastic and dedicated Assistant Manager to join our team at our 1613 N Bloomington St location in Streator, United States. As an Assistant Manager, you will play a crucial role in ensuring the smooth operation of the store, delivering exceptional customer service, and leading a team of employees to success.

Responsibilities:

• Oversee daily store operations, including opening and closing procedures
• Manage and motivate team members to maintain high performance standards
• Run shifts efficiently, ensuring timely order preparation and delivery
• Handle customer inquiries and resolve issues promptly and professionally
• Manage cash transactions and maintain accurate financial records
• Assist in inventory management and supply ordering
• Ensure compliance with food safety and hygiene standards
• Contribute to a positive work environment and team morale
• Assist in training and developing new team members
• Implement and maintain company policies and procedures
• Collaborate with the store manager to achieve sales targets and improve store performance

Qualifications:

• Proven experience in a supervisory or leadership role, preferably in the food service industry
• Strong math and problem-solving skills for effective shift management and financial handling
• Excellent customer service skills with a friendly and professional demeanor
• Demonstrated ability to manage and motivate employees
• Proficiency in cash handling and basic accounting principles
• Exceptional organizational and multitasking abilities
• Attention to detail and commitment to maintaining high-quality standards
• Ability to work in a fast-paced environment and adapt to changing priorities
• Strong communication skills, both verbal and written
• Flexibility to work various shifts, including evenings, weekends, and holidays
• Physical ability to lift up to 25 pounds and stand for extended periods
• High school diploma or equivalent; additional education or training in business management is a plus

This job posting is for a position in a store owned and operated by an independent franchisee, not Domino's Pizza LLC, Domino's Pizza Franchising LLC, or Domino's Pizza, Inc. (\"Domino's Corporate\"). This means, among other things, that the independent franchisee is alone responsible for and will independently make all decisions concerning employment matters for the store, including those relating to hiring, firing, discipline, supervision, compensation and benefits, staffing, and scheduling. Domino's will not receive a copy of any application you submit for this job posting and will not have any control over whether you receive an interview and/or are ultimately hired. Further, Domino's does not control and is not responsible for the employment policies and practices of independent franchisees. If you are hired for this job posting, the independent franchisee will be your only employer, and you will not be an employee of Domino's.

• 
  
• Plan, write, and execute manual, CMM, and Vision System inspections
  
• Support internal customer requests for support related to inspection, measurement strategy, calibration, and other related requests.
  
• Identify nonconformances and collaborate with engineering and manufacturing teams to conduct root cause analysis and implement corrective actions
  

• 
  
• Document and record inspection results and properly file hard and electronic copies
  
• Interpret drawings and schematics.
  
• Initiate nonconformance reports (NCR's) for all nonconforming material.
  
• Perform inspections using the microscope.
  
• Perform first-article reports using various inspection tools.
  
• Follow customer specifications to satisfy the inspection requirements of the drawing or work order instructions
  
• Uphold the company core values
  
• Other duties as assigned
  

• 
  
• Must have the knowledge and experience necessary for the position.
  
• Must be able to follow instructions and procedures and work with minimal supervision.
  
• Must be capable of reading drawings and inspecting the work being performed.
  
• Strong understanding of GD&T.
  
• Manual and/or CMM inspection experience.
  
• Experience using Height Gauges, Micrometers, Calipers, and other inspection tools.
  
• Practical knowledge of Microsoft Office (Word, Excel, Outlook).
  
• Knowledge of Epicor ERP 10 or similar Management/Manufacturing Information System.
  

• 
  
• High school diploma or general education degree (GED)
  
• Minimum two years of experience with Calypso Software and Zeiss CMM; five years preferred
  

• 
  
• Is not a United States citizen
  
• Is not lawfully admitted for permanent residence in the U.S.
  
• Does not have politically protected status (embassy, refugee, or asylum)
  
• Has dual U.S. / foreign citizenship