Medium Rare Jobs in Usa
2,266 positions found
J
Journeyman Medium Voltage Electrician
✦ New
Salary not disclosed
JH Industrial Services, a division of Jergens Piping Corporation, is seeking a highly skilled Journeyman Medium Voltage Electrician to support operations at Pfizer in Kalamazoo, MI.
This role is responsible for the operation and maintenance of a medium voltage (480V – 13,200V) electrical distribution system within a pharmaceutical manufacturing environment. The ideal candidate is a licensed journeyman electrician with strong industrial/commercial experience and a commitment to safety, reliability, and excellence.
Role Summary
The Journeyman Medium Voltage Electrician must be a skilled craftsman in their trade and possess:
- A minimum two (2) year technical degree or trade school equivalency
- At least three (3) years of practical working experience as a journeyman electrician in the industrial/commercial electrical equipment service industry
- A valid State of Michigan Electrical Journeyman License (required)
The incumbent will be a member of the team responsible for operating and maintaining the site’s medium voltage electrical infrastructure, including substations, breakers, motor controls, high voltage cable, and distribution pole lines.
Key Responsibilities
- Operate and maintain the site’s medium voltage (480V – 13,200V) electrical distribution system.
- Perform preventive maintenance, modifications, installations, and repairs on medium voltage power distribution systems.
- Maintain substations, switchgear, breakers, motor controls, high voltage cable, and pole line distribution systems.
- Ensure compliance with company standards, site procedures, and applicable government regulations.
- Troubleshoot and resolve electrical issues using established problem-solving methodologies.
- Support engineering activities including:
- Process design
- Equipment selection
- Documentation
- Calibration and testing
- Project scope development
- Communicate effectively when developing and implementing solutions.
- Work variable shifts and participate in a 24-hour on-call rotation as required.
- Collaborate within a high-performing team to complete tasks safely and efficiently.
- Work with minimal supervision while maintaining high safety and performance standards.
Required Qualifications
Education & Licensing
- High school diploma or GED required.
- Associate degree or relevant trade school equivalency required.
- State of Michigan Electrical Journeyman License (required).
Experience
- Minimum three (3) years of experience as a journeyman electrician in an industrial or commercial environment.
- Medium voltage experience (480V–13,200V) strongly preferred.
- Experience in a manufacturing or pharmaceutical environment is a plus.
Technical Skills
- Strong understanding of electrical industry practices and standards.
- Ability to read and interpret electrical drawings and diagrams.
- Excellent computer skills (Microsoft systems).
- Strong written and verbal communication skills.
- Self-starter with the ability to work independently.
- Strong work ethic and commitment to quality workmanship.
H
Physician / Pediatrics / South Carolina / Locum or Permanent / Rare Upcoming General Pediatrician Op
✦ New
Salary not disclosed
Rare Upcoming General Pediatrician Opportunity Near The Beautiful South Carolina Coast! This is a combination not often seen but due to extenuating circumstances this quaint, long-standing, not-for-profit community hospital, located an easy drive from South Carolina's sought-after coastal cities, is now looking for a new general pediatrician to ideally begin sometime over the summer.
This is a mostly outpatient position with no obstetrics, no in-hospital work aside from a little surgery, and no on-call.
We are shooting for a late summer start date at this point and compensation is competitive plus full benefits including a great health plan with a low deductible and retirement plan with match.
Don't miss this rare practice opportunity with growth potential in one of the most in-demand regions of the country! If you are interested in hearing more about this opportunity, please call HDA at , ext.
224, or text to .
You can also reach us through email at .
Please reference Job ID # J-14423.
This is a mostly outpatient position with no obstetrics, no in-hospital work aside from a little surgery, and no on-call.
We are shooting for a late summer start date at this point and compensation is competitive plus full benefits including a great health plan with a low deductible and retirement plan with match.
Don't miss this rare practice opportunity with growth potential in one of the most in-demand regions of the country! If you are interested in hearing more about this opportunity, please call HDA at , ext.
224, or text to .
You can also reach us through email at .
Please reference Job ID # J-14423.
M
Medium/High Voltage Electrical Engineer (Experienced Professional)
✦ New
Salary not disclosed
Medium/High Voltage Electrical Engineer (Experienced Professional)
Build a Career That Matters with One of the World's Most Respected Employers!
- - - - - - - - - - - -
THE OPPORTUNITY
This opportunity is in Woodburn, Indiana in our BF Goodrich tire plant. Woodburn is a small town located about 30 mins east of Fort Wayne, IN. Fort Wayne is the cultural and economic center of northeastern Indiana and the second largest city in Indiana. Established in 1961, our plant makes passenger and light truck tires.
WHAT YOU WILL BRING
- The Electrical Engineer provides project management and technical support for the design and construction of electrical site work, utilities, and buildings. Education and work experience requirements
- BS Electrical Engineering for Design and Procurement Phases with 5+ years of experience on industrial projects preferred. Degree or Significant Experience for Industrial Construction and acceptance phases 5+ years of experience with degree or 10+ years of experience with field supervision on industrial projectsrequired.
- Professional Engineering License is a plus.
- Demonstrated leadership experience.
- Demonstrated strong organizational skills and project management ability.
- Strong skills in written and verbal communication.
- Demonstrated ability to set and achieve goals with minimum supervision and the ability to suggest and implement ideas to bring value to the team.
- Demonstrated solid teamwork, communication, and planning skillsrequired.
- Demonstrate good understanding of electrical designs and practices for medium and low voltage distribution systems, building power, emergency power and lighting distributions, fire detection, data and networking,intrusionand access control, BMS controls and automation, lighting protection systems,groundingand bonding.
- Software Proficiency Requirements: Microsoft Excel, Project, Word.
- Completed 10-hour OSHA safety training.
- Demonstrate a professional attitude by treating each person with respectonthe job.
WHAT YOU WILL DO
1 - Design Phase
a) Work with the design teamdailyto answer questions, monitor the design, and evaluate progress.
b) Participate in design reviews at 30%, 60%, 90%, and final detail design review and IFC documentation.
c) Participate in 3D Model conflict resolution by disciplines.
d) Participate in the analysis of design proposals as part of the Michelin Design Team under the direction of the Michelin Design leader.
e) Conduct analysis and provide weekly reports concerning the proposed technical solutions, costs, staffing plan, completion schedule,permittingplans, and other details provided by each EPC. Evaluate and grade the proposals providing recommendation to Michelin.
f) Provide a risk analysisforthe technical concepts for all systems and equipment.
g) AssistMichelin with change management by evaluating technical solutions, completing estimates, providing a riskanalysisand supporting the procurement manager as needed with information.
2 - Procurement Phase
Review material and construction packages with the EPC company prior to issue. Provide a report concerning the quality of the package and adherence to the contract requirements.
b) Review the top 2 responses to each procurement package. Provide a report concerning the quality of the package and adherence to the contract requirements.
c) Review material and equipment shop drawings after review by the EPC company. Provide a report concerningthe adherenceto the contract requirements.
3 - Construction Phase
a) Participate in pre-construction meetings and provide input and comments to the meeting to add value to the construction process.
b) Planning for construction and authorization to start construction.
c) Validatereadiness of GC and subs for task execution based on preplanning action list.
d).Finalizea workscope and schedule with Site management.
e). Setup safety work expectations with GC and subs
f). Setup QA and task acceptance expectations with GC and subs.
g).FinalizeandapproveSchedule targets for GC and subs. Supplement schedule with the risk matrix and recovery plans.
h) Authorization to start construction.
c) Determine a construction material testing programin syncwith the construction activity. Quality testing concerning equipment testing, cable testing, welding, etc. must be considered in the testing plan.
d) Manage the on-site operations of the quality test technicians who will execute the quality testing plan. Following NETA testing guidelines. Receive and analyze testing reports. Takeactionsto minimize schedule impact if a test does not pass.
e) All activities will havean initialinspection conductedperthe pre-construction meeting. Witness the work and approve of the methods andthe final result. Work with the contractor on the remedies and deficient items.
f) Afterinitialinspection and approval of method and results confirm that all work will match theinitialinspection requirements. Monitor andobservethe quality of the work and drive corrections and punch list process to achieve the correct level of quality.
g) Make observations concerning the work methods, equipment, rigging, etc. used on site by the contractor.Record violations of Michelin rules, regulations, goodpractices. Makecorrections asnecessary in the field. Special focus shall be made on fall protection, rigging, Lockout, Tagout, Tryout, Arc flash safety, shock hazard protection, and welding.
h) AssistMichelin with change management by evaluating technical solutions, completing estimates, providing a riskanalysisand supporting the procurement manager as needed with information.
i) Track system installation versus major milestones andidentifyconflicts and risks of late milestone completion.
j) Answer RFI's, evaluate Change Orders as delegated by theteamleader. Participate in project reviews withMichelinProject Team.
k) Attend weekly contractormeetingsand weekly Safetymeetings.
4 - Final Completion and Acceptance
a) Evaluate the design documents and make acceptance filesin accordance withMichelin direction.
b) Ensure the contractor develops a punch list and corrects all items in preparation for building acceptance.
c) Inspect the completed areas and record acceptance or non-acceptance on the documents. Drive the contractor to complete the non-accepted items to meet the contract completion dates.
d) Coordinate with Michelin Construction, safety, environmental, and maintenance and includetheir representativesand comments in the final acceptance process and documents.
e) Verify as built drawings. Check all drawings against physical installation. Note items where the as built is not correct and drive the EPC contractor to properly complete theas-builtdrawings.
#LI-RM1
#LI-HIRINGMICHELIN
Ready to Shape the Future of Innovation?
Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.
The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.
Why Michelin?
Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.
Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.
Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.
Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.
Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .
This position is not available for immigration sponsorship.
We build the future with people like you. Begin your career with Michelin today!
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) - Work from anywhere with rare travel demands (AUSTIN)
$132,400 - 238,400
Principal Mechanical Integration Engineer
Mechanical Design Engineering
Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
8 years' experience in mechanical design and integration of mission-critical systems.
~ Proven track record of successful system designs and implementations in a relevant industry
~ Strong understanding of mechanical systems, integration strategy, and system coordination
~ Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
~ Master’s Degree in Mechanical Engineering
~
Remote working/work at home options are available for this role.
Mechanical Design Engineering
Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
8 years' experience in mechanical design and integration of mission-critical systems.
~ Proven track record of successful system designs and implementations in a relevant industry
~ Strong understanding of mechanical systems, integration strategy, and system coordination
~ Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
~ Master’s Degree in Mechanical Engineering
~
Remote working/work at home options are available for this role.
M
Physician / Pediatrics / South Carolina / Permanent / Rare Upcoming General Pediatrician Opportunity
✦ New
Salary not disclosed
This is a combination not often seen but due to extenuating circumstances this quaint, long-standing, not-for-profit community hospital, located an easy drive from South Carolina's sought-after coastal cities, is now looking for a new general pediatrician to ideally begin sometime over the summer.
This is a mostly outpatient position with no obstetrics, no in-hospital work aside from a little surgery and no on-call.
We are shooting for late summer start date at this point and compensation is competitive plus full benefits including a great health plan with low deductible and retirement plan with match.
Don't miss this rare practice opportunity with growth potential in one of the most in-demand regions of the country!If you are interested in hearing more about this opportunity, please call HDA at , ext.
224, or text to .
You can also reach us through email at .
Please reference Job ID # J-14423.
This is a mostly outpatient position with no obstetrics, no in-hospital work aside from a little surgery and no on-call.
We are shooting for late summer start date at this point and compensation is competitive plus full benefits including a great health plan with low deductible and retirement plan with match.
Don't miss this rare practice opportunity with growth potential in one of the most in-demand regions of the country!If you are interested in hearing more about this opportunity, please call HDA at , ext.
224, or text to .
You can also reach us through email at .
Please reference Job ID # J-14423.
Clinical Case Educator - Rare Disease
🏢 McKesson
Salary not disclosed
McKesson is an impact-driven, Fortune 10 company that touches virtually every aspect of healthcare. We are known for delivering insights, products, and services that make quality care more accessible and affordable. Here, we focus on the health, happiness, and well-being of you and those we serve - we care.
What you do at McKesson matters. We foster a culture where you can grow, make an impact, and are empowered to bring new ideas. Together, we thrive as we shape the future of health for patients, our communities, and our people. If you want to be part of tomorrow's health today, we want to hear from you.
Job Description
Job Description
Mission Biologics ( ) is dedicated to delivering the best possible care for patients battling a complex disease. We do that by bringing care into alignment: unifying fragmented services across the care continuum. Our mission is to help payors, biopharma companies, researchers and healthcare providers improve outcomes, accelerate access to care and reduce risk — all by focusing on the patient first. With a multidisciplinary approach, we bring deep expertise to a complicated diseases like cancer and neurological conditions.
Purpose
The Clinical Case Educator is an important role in our team. The nurse is passionate and is committed to provide a high level of patient care and counseling patients enrolled in the Medication Therapy Program. The ideal candidate has great communication skills, problem solving skills, and must be self-motivated. This person will be driven to help team members to achieve the mission of providing high level of care to patients.
Must reside within a commutable distance of Cary, NC.
Shift Information
* Cary, NC - Monday-Friday from 9am-6pm EST and one night per week rotating to work 11-8pm.
* The nurses are required to report to the office twice a week.
* One rotating Saturday.
Key Responsibilities
* Counsel and educate new/existing patients on specialty drug therapies
* Adherence to contracted and accrediting regulations as indicated by drug specification
* Complete, thorough and accurate documentation utilizing good documentation practice and compliance to industry standards and regulations
* Discuss potential/current side effects with patients to educate about treatment alternatives and facilitate ongoing therapy adherence
* Identify and report adverse events (AEs) and product complaints (PCs) to the manufacturer, FDA, and/or other governing authorities
* Specialty drug verification and education. Provider/patient conduit to support therapeutic longevity.
* Adherence to patient management programs through call cadence schedules, medication management programing, drug counseling and provider collaboration.
* Maintenance of patient demographic records, medical history and records in accordance to federal HIPAA standards
* Collaboration with Pharmacy Support teams to ensure timely and accurate delivery of specialty drugs
Minimum Requirements:
* 4+ years of nursing experience with at least 1 year of acute, inpatient care preferred.
* Registered Nurse with current unrestricted compact state license or primary NC licensure.
Critical Skills:
* Ability to obtain licensing in all states and United States territories serviced within 3 months of employment through Biologics supported programming (minimal application guidelines apply) specifically California (College Level Microbiology with Lab required)
* Strong Computer skills, including e-mail, word processing, spreadsheet, and web-based programs.
* Effective verbal and written communication, experience with motivational interviewing preferably.
* Ability to read, analyze and interpret practice standards, professional journals, technical procedures and government standards and regulations.
Education:
* Associates, Bachelor, or higher degree in Nursing or accredited nursing diploma.
Physical Requirements:
* Large percentage of time spent performing computer-based work is required.
* Hybrid position-Office days required.
We are proud to offer a competitive compensation package at McKesson as part of our Total Rewards. This is determined by several factors, including performance, experience and skills, equity, regular job market evaluations, and geographical markets. The pay range shown below is aligned with McKesson's pay philosophy, and pay will always be compliant with any applicable regulations. In addition to base pay, other compensation, such as an annual bonus or long-term incentive opportunities may be offered. For more information regarding benefits at McKesson, please click here. ( )
Our Base Pay Range for this position
$31.00 - $51.66
McKesson has become aware of online recruiting-related scams in which individuals who are not affiliated with or authorized by McKesson are using McKesson's (or affiliated entities, like CoverMyMeds or RxCrossroads) name in fraudulent emails, job postings or social media messages. In light of these scams, please bear the following in mind:
McKesson Talent Advisors will never solicit money or credit card information in connection with a McKesson job application.
McKesson Talent Advisors do not communicate with candidates via online chatrooms or using email accounts such as Gmail or Hotmail. Note that McKesson does rely on a virtual assistant (Gia) for certain recruiting-related communications with candidates.
McKesson job postings are posted on our career site: ( ) .
McKesson is an Equal Opportunity Employer
McKesson provides equal employment opportunities to applicants and employees, without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other legally protected category. For additional information on McKesson's full Equal Employment Opportunity policies, visit our Equal Employment Opportunity ( ) page.
McKesson welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. If you require accommodation please contact us by sending an email to (http:// ) .
Join us at McKesson!
What you do at McKesson matters. We foster a culture where you can grow, make an impact, and are empowered to bring new ideas. Together, we thrive as we shape the future of health for patients, our communities, and our people. If you want to be part of tomorrow's health today, we want to hear from you.
Job Description
Job Description
Mission Biologics ( ) is dedicated to delivering the best possible care for patients battling a complex disease. We do that by bringing care into alignment: unifying fragmented services across the care continuum. Our mission is to help payors, biopharma companies, researchers and healthcare providers improve outcomes, accelerate access to care and reduce risk — all by focusing on the patient first. With a multidisciplinary approach, we bring deep expertise to a complicated diseases like cancer and neurological conditions.
Purpose
The Clinical Case Educator is an important role in our team. The nurse is passionate and is committed to provide a high level of patient care and counseling patients enrolled in the Medication Therapy Program. The ideal candidate has great communication skills, problem solving skills, and must be self-motivated. This person will be driven to help team members to achieve the mission of providing high level of care to patients.
Must reside within a commutable distance of Cary, NC.
Shift Information
* Cary, NC - Monday-Friday from 9am-6pm EST and one night per week rotating to work 11-8pm.
* The nurses are required to report to the office twice a week.
* One rotating Saturday.
Key Responsibilities
* Counsel and educate new/existing patients on specialty drug therapies
* Adherence to contracted and accrediting regulations as indicated by drug specification
* Complete, thorough and accurate documentation utilizing good documentation practice and compliance to industry standards and regulations
* Discuss potential/current side effects with patients to educate about treatment alternatives and facilitate ongoing therapy adherence
* Identify and report adverse events (AEs) and product complaints (PCs) to the manufacturer, FDA, and/or other governing authorities
* Specialty drug verification and education. Provider/patient conduit to support therapeutic longevity.
* Adherence to patient management programs through call cadence schedules, medication management programing, drug counseling and provider collaboration.
* Maintenance of patient demographic records, medical history and records in accordance to federal HIPAA standards
* Collaboration with Pharmacy Support teams to ensure timely and accurate delivery of specialty drugs
Minimum Requirements:
* 4+ years of nursing experience with at least 1 year of acute, inpatient care preferred.
* Registered Nurse with current unrestricted compact state license or primary NC licensure.
Critical Skills:
* Ability to obtain licensing in all states and United States territories serviced within 3 months of employment through Biologics supported programming (minimal application guidelines apply) specifically California (College Level Microbiology with Lab required)
* Strong Computer skills, including e-mail, word processing, spreadsheet, and web-based programs.
* Effective verbal and written communication, experience with motivational interviewing preferably.
* Ability to read, analyze and interpret practice standards, professional journals, technical procedures and government standards and regulations.
Education:
* Associates, Bachelor, or higher degree in Nursing or accredited nursing diploma.
Physical Requirements:
* Large percentage of time spent performing computer-based work is required.
* Hybrid position-Office days required.
We are proud to offer a competitive compensation package at McKesson as part of our Total Rewards. This is determined by several factors, including performance, experience and skills, equity, regular job market evaluations, and geographical markets. The pay range shown below is aligned with McKesson's pay philosophy, and pay will always be compliant with any applicable regulations. In addition to base pay, other compensation, such as an annual bonus or long-term incentive opportunities may be offered. For more information regarding benefits at McKesson, please click here. ( )
Our Base Pay Range for this position
$31.00 - $51.66
McKesson has become aware of online recruiting-related scams in which individuals who are not affiliated with or authorized by McKesson are using McKesson's (or affiliated entities, like CoverMyMeds or RxCrossroads) name in fraudulent emails, job postings or social media messages. In light of these scams, please bear the following in mind:
McKesson Talent Advisors will never solicit money or credit card information in connection with a McKesson job application.
McKesson Talent Advisors do not communicate with candidates via online chatrooms or using email accounts such as Gmail or Hotmail. Note that McKesson does rely on a virtual assistant (Gia) for certain recruiting-related communications with candidates.
McKesson job postings are posted on our career site: ( ) .
McKesson is an Equal Opportunity Employer
McKesson provides equal employment opportunities to applicants and employees, without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other legally protected category. For additional information on McKesson's full Equal Employment Opportunity policies, visit our Equal Employment Opportunity ( ) page.
McKesson welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. If you require accommodation please contact us by sending an email to (http:// ) .
Join us at McKesson!
A
Physician / Cardiology / Connecticut / Permanent / Rare partnership track opportunity with premier C
Salary not disclosed
Premier, single-specialty cardiology group with excellent reputation and successful history seeks Non-invasive Cardiologist due to growth and demand.
Group provides full range of cardiovascular testing services as well as interventional procedures.
The group admits to two Connecticut hospitals including regionally recognized teaching institution.
Extremely light call.
Partnership track for qualified and motivated physicians.
Highly desirable locale offers historic towns with access to top-notch school systems and recreational amenities.
Conveniently located between two metropolitan areas with New York and Boston just a short drive away.
Group provides full range of cardiovascular testing services as well as interventional procedures.
The group admits to two Connecticut hospitals including regionally recognized teaching institution.
Extremely light call.
Partnership track for qualified and motivated physicians.
Highly desirable locale offers historic towns with access to top-notch school systems and recreational amenities.
Conveniently located between two metropolitan areas with New York and Boston just a short drive away.
P
Physician / Neurology / Texas / Locum tenens / Rare! Texas Neuro-Hospitalist needed! Job
Salary not disclosed
Happy Holidays,Thank you for taking the time to explore this opportunity.
We are a full service locum tenens and permanent recruiting firm.
Please, let me know what is ideal for you and I will check the market.
The position that I am sending you today is for on-going coverage in Texas see the details below.The Locum Tenens neurology opportunity in Texas-Location: San Antonio, TX-Duration: March 2019 September 2019 (with potential for extension, will consider permanent conversion)-Group: 1 other physician-Schedule: Flexible, 7 on/7off or Monday Friday 7a-5p-Call: Rotating 24 hour (approximate 5 phone calls only per day, 3-4 call backs per week, SOC back up in ER provided)-Scope: Rounding and consults-Procedures: Lumbar puncture, EEGs-Hospital: Level IV trauma, level I stroke, 270 beds, 30 bed ICU, 15 neuro beds-Required: Recent hospital experience, Board certified or board eligible in Neurology, Active Texas license Call or email for more details Assistance with credentialing provided Approximately 30-60 day timeline Travel, Accommodations, Housing PAID Malpractice- Covered If you (or someone you know) is interested in a diversified career opportunity, and a way to supplement income feel free to reach out.
Sending an updated CV will be most effective in finding the right opportunity.
All information is held strictly confidential.Sophia KaahaPacific Companies, Locum Tenens Division (714)
We are a full service locum tenens and permanent recruiting firm.
Please, let me know what is ideal for you and I will check the market.
The position that I am sending you today is for on-going coverage in Texas see the details below.The Locum Tenens neurology opportunity in Texas-Location: San Antonio, TX-Duration: March 2019 September 2019 (with potential for extension, will consider permanent conversion)-Group: 1 other physician-Schedule: Flexible, 7 on/7off or Monday Friday 7a-5p-Call: Rotating 24 hour (approximate 5 phone calls only per day, 3-4 call backs per week, SOC back up in ER provided)-Scope: Rounding and consults-Procedures: Lumbar puncture, EEGs-Hospital: Level IV trauma, level I stroke, 270 beds, 30 bed ICU, 15 neuro beds-Required: Recent hospital experience, Board certified or board eligible in Neurology, Active Texas license Call or email for more details Assistance with credentialing provided Approximately 30-60 day timeline Travel, Accommodations, Housing PAID Malpractice- Covered If you (or someone you know) is interested in a diversified career opportunity, and a way to supplement income feel free to reach out.
Sending an updated CV will be most effective in finding the right opportunity.
All information is held strictly confidential.Sophia KaahaPacific Companies, Locum Tenens Division (714)
C
Physician / Family Practice / California / Permanent / Family practice - rare opportunity Job
Salary not disclosed
Job AnnouncementFamily PhysicianThe Coastal Health Alliance (CHA), a federally funded full service family practice, is beginning recruitment of a Family Medicine Physician.
Our area is a designated site for National Health Service Corps loan repayment.Located in beautiful rural West Marin County, this is an exceptional opportunity for the right person.
CHA operates out of three sites: Point Reyes Station, Bolinas, and Stinson Beach.
These are all unincorporated villages on the California coast, one hours drive north of San Francisco.
The area is known for its natural beauty and is home to the Point Reyes National Seashore as well as two state parks and the Golden Gate National Recreational Area.
The economy is based on agriculture and tourism, as well as many local service businesses.CHA is searching for an MD interested in the full range of family medicine.
As a rural practice, we see a full range of ambulatory care: well child and adult, including a full scope of well woman care, episodic illness and trauma care.
We perform minor procedures in the office when appropriate.
We are integrating behavioral and oral health.
The personal and professional qualities we are seeking include:Training and experience with a broad clinical base.Professional focus on whole-patient care and quality outcomes.Comfort with office based procedures both scheduled and in urgent care setting.Enthusiastic about team care and problem solving in a small organization focused on patient and staff satisfactionEnjoys working in a collegial atmosphere with a strong emphasis on collaboration.
Conveys respect for all staff and patients.Willingness to mentor new providers and participate in training of PA/FNP students periodicallyIs open to complementary and alternative health practices, which are evidence-based (Integrative Medicine)Has a strong self-awareness, high emotional IQ and well-developed management of stress in the workplace and in his/her personal life.Has a good sense of humor, and keeps life and work in a healthy balance.Competency in Spanish and in Latino cultural issues a plusCompetitive salary and generous benefits.
Our area is a designated site for National Health Service Corps loan repayment.Located in beautiful rural West Marin County, this is an exceptional opportunity for the right person.
CHA operates out of three sites: Point Reyes Station, Bolinas, and Stinson Beach.
These are all unincorporated villages on the California coast, one hours drive north of San Francisco.
The area is known for its natural beauty and is home to the Point Reyes National Seashore as well as two state parks and the Golden Gate National Recreational Area.
The economy is based on agriculture and tourism, as well as many local service businesses.CHA is searching for an MD interested in the full range of family medicine.
As a rural practice, we see a full range of ambulatory care: well child and adult, including a full scope of well woman care, episodic illness and trauma care.
We perform minor procedures in the office when appropriate.
We are integrating behavioral and oral health.
The personal and professional qualities we are seeking include:Training and experience with a broad clinical base.Professional focus on whole-patient care and quality outcomes.Comfort with office based procedures both scheduled and in urgent care setting.Enthusiastic about team care and problem solving in a small organization focused on patient and staff satisfactionEnjoys working in a collegial atmosphere with a strong emphasis on collaboration.
Conveys respect for all staff and patients.Willingness to mentor new providers and participate in training of PA/FNP students periodicallyIs open to complementary and alternative health practices, which are evidence-based (Integrative Medicine)Has a strong self-awareness, high emotional IQ and well-developed management of stress in the workplace and in his/her personal life.Has a good sense of humor, and keeps life and work in a healthy balance.Competency in Spanish and in Latino cultural issues a plusCompetitive salary and generous benefits.
R
Fashion Design Intern
✦ New
Salary not disclosed
Company Description
Rare Editions, a brand under Star Children’s Dress Company, has been creating stylish and affordable dresses for girls since 1936. Based in New York City, the company operates its showroom on the 18th floor of 1250 Broadway. Our team of designers, merchandisers, and sales staff collaborate to launch fresh seasonal collections that attract major department stores globally. While Rare Editions is our flagship brand, we also represent other labels like Rare Too, Chantilly Place, Counting Daisies, Emily Rose, Tween Diva, and Dear Moon.
Role Description
This full-time, on-site Fashion Design Intern role is located in New York, NY. As a Fashion Design Intern, you will assist in creating innovative designs, contribute to seasonal collections, and assist in sample production and styling. Your day-to-day tasks will include working closely with the design team on sketching, developing textiles and patterns, and supporting the team with sewing and assembling prototypes. Additionally, you will have the opportunity to engage with the broader product lifecycle, including presentations and collaboration across teams. This is a paid role at $17/hr.
Qualifications
- Proficiency in Fashion Design and Fashion Styling for creating and enhancing clothing designs.
- Graphic Design skills to assist in developing visual presentations and design concepts.
- Knowledge and experience in Textiles and Sewing to contribute to garment construction and material selection.
- Enthusiasm for trends and creativity in the fashion industry.
- Strong attention to detail and an ability to handle multiple tasks in a fast-paced environment.
- Pursuing a degree in Fashion Design, Textile Design, or a related field is a plus.
R
Seamstress - Dresses
✦ New 🏢 Rare Editions
Salary not disclosed
Company Description
Located on the 18th floor of 1250 Broadway in New York City, our showroom features brand-new seasonal lines that major department stores from around the world visit to view, both physically and virtually. The Rare Editions brand is our largest influence in the market, complemented by other labels like Rare Too, Chantilly Place, Counting Daisies, Emily Rose, Tween Diva, and Dear Moon. Our goal is to produce fashionable yet affordable dresses for girls.
Role Description
This is a full-time on-site role for a Seamstress who specializes in Dresses, located in New York, NY. The Seamstress will be responsible for dressmaking, tailoring, and fitting dresses. Day-to-day tasks include creating dresses based on design specifications, performing fittings, making alterations, and ensuring high-quality standards are met. Additionally, the role requires effective communication with customers and providing exceptional customer service.
Qualifications
- Proficiency in Dressmaking and Tailoring
- Experience in Fitting dresses to ensure proper fit and comfort
- Strong Communication and Customer Service skills
- Attention to detail and ability to deliver high-quality work
- Ability to work independently and as part of a team
- Prior experience in the fashion industry is a plus
- Union membership benefits
U
Principle Advisor, Procedural Areas - Cath Lab
✦ New
Salary not disclosed
Job Description
Description
Principal Advisor, Cath Lab (System‑Level Strategic Leader)
Reporting directly to the Senior Director of Perioperative and Procedural Services, the Principal Advisor for Cath Lab serves as the system's senior subject‑matter expert and strategic leader for this procedural domain. In this capacity, the leader will functions as an enterprise‑level authority responsible for establishing standard practices, policies, and procedures for daily operations. The role also provides oversight and input into the system capital replacement plan and operational KPIs. Additionally, this role leads accreditation readiness efforts and partners closely with the Quality Institute to ensure continued compliance across all UH locations. Operating within a matrixed structure, this role provides dotted‑line guidance to local operational leaders.
A Brief Overview
The Principal Advisor, Procedural Areas serves as a clinical and strategic subject matter expert and resource across the health system, providing expert consultation, strategic guidance, and performance oversight for the assigned procedural areas of expertise, such as Central Sterile Processing/High Level Disinfection (CSP/HLD), Operating Rooms (OR), Endoscopy, and Cath/Interventional Radiology (IR) Labs. This role supports standardization, quality improvement, and regulatory compliance across all facilities, working collaboratively with local leaders to drive excellence in patient care, operational efficiency, and staff development. This position holds dotted-line authority to influence and support local managers and directors, aligning practices with system-wide goals, although the depending on the area, they may have direct reports. This position will develop and implement standardized departmental policies, procedures, and quality objectives. The position will also gather, analyze, and share key performance indicators (KPIs) across the system to support transparency, promote accountability, and drive continuous improvement at both the local and system levels. Additionally, this position will lead the creation and maintenance of a system-wide education and competency plan in collaboration with others.
What You Will Do
* Key Responsibilities:
* System-Level Leadership & Strategic Oversight: Serve as the system-wide clinical expert for assigned procedural specialty (CSP/HLD, OR, Endoscopy, Cath/IR) based on evidence based best practices, protocols, and technological advancement to enhance patient safety, workflow efficiency and clinical outcomes.
* Collaborate with local leaders to standardize workflows, optimize scheduling, and improve throughput and resource utilization.
* Serve as a liaison between system leadership and local procedural teams, translating enterprise-wide strategy into operational execution. Assist local leaders to translate strategic goals into operational practices across facilities.
* Lead or support initiatives to improve efficiency, safety, and patient outcomes (e.g., turnover time, block utilization, scope management, radiation safety), by utilizing process improvement initiatives using Lean, Six Sigma, or PDSA methodologies.
* Depending on the assigned procedural area, this role may include direct reports and associated people management and local budgetary responsibilities.
* Policy Development & Standardization
* Develop, review, implement, and maintain system-wide policies, protocols, and standard operating procedures related to assigned area of expertise. Partner with local leadership to support training, ensure consistent application, and monitor compliance across all sites.
* Ensure alignment with current regulatory and accreditation standards (e.g., AORN, DNV, JCAHO, AAMI, CMS, ACC). Support local leaders in preparing for surveys, audits, and inspections, ensuring alignment with standards and documentation requirements.
* Promote consistent application of best practices across all sites, including technology integration, including electronic health records (EHR), image management systems, and inventory systems.
* Training, Education & Competency
* Assist in design and deliver ongoing education programs, competency assessments, and professional development plans throughout system.
* Provide subject matter expertise for local leaders during staff onboarding and ongoing professional development activities.
* Act as a subject matter expert in regulatory standards and clinical technologies.
* Quality Improvement & Data Analysis
* Analyze system-wide performance data, audit results, and dashboard metrics to identify trends and improvement opportunities. Monitor and analyze key performance indicators (KPIs) such as volume trends, case mix, supply costs, radiation exposure, and outcomes.
* Collaborate with local teams and system leadership to develop and implement targeted quality improvement initiatives. Support audit activities and review documentation accuracy to ensure compliance with safety and quality standards.
* Participate in or lead root cause analyses and process improvement initiatives
* Regulatory & Compliance Support
* Stay current with evolving regulatory requirements and industry standards. including infection control, safety, and documentation standards.
* Serve as the internal resource for regulatory and accreditation readiness, supporting local managers in compliance efforts.
* Review and revise system-wide recommendations based on regulatory updates.
* Resource & Inventory Management
* Provide expert advice on system-wide capital equipment, instrumentation, supply chain strategies.
* Support budget planning and procurement efforts in collaboration with system and local hospital leadership.
Additional Responsibilities
* Participate in system-wide committees, task forces, and strategic initiatives.
* Foster a culture of safety, learning, and clinical excellence.
* Ensure adherence to PHI and confidentiality standards.
* Perform other duties as assigned.
* Performs other duties as assigned.
* Complies with all policies and standards.
* For specific duties and responsibilities, refer to documentation provided by the department during orientation.
* Must abide by all requirements to safely and securely maintain Protected Health Information (PHI) for our patients. Annual training, the UH Code of Conduct and UH policies and procedures are in place to address appropriate use of PHI in the workplace.
Qualifications
Education
* Bachelor's Degree Nursing, Healthcare Administration, Cardiovascular Technology, Radiologic Technology, or related field (Required)
* Master's Degree MSN, MHA, MBA, or related (Preferred)
Work Experience
* Minimum of 7-10 years of clinical and operational leadership experience in cardiac catheterization lab, interventional cardiology, electrophysiology lab, structural heart program (Required)
* 3+ years system-level or multi-site experience, preferably in a matrixed organization. (Required)
Preferred Experience:
- Experience managing budgets, capital planning, staffing models, quality metrics, and regulatory compliance
- Academic medical center or tertiary/quaternary care system experience preferred
Knowledge, Skills, & Abilities
* Strong analytical and data interpretation skills. (Required proficiency)
* Excellent communication, facilitation, and relationship-building abilities. (Required proficiency)
* Ability to influence without direct authority and navigate complex organizational structures. (Required proficiency)
* Deep understanding of regulatory and accreditation standards. (Required proficiency)
Licenses and Certifications
* Active clinical license or certification (e.g., RN, RCIS, RCES, ARRT, CRCST, CSPDT, CER,CIS) required based on specialty. (Required)
* Specialty certifications (e.g., CNOR, CVRN, CEPS, Lean Six Sigma) (Preferred)
* Preferred certifications:
* For Registered Nurse candidates:
* Cardiac - Vascular Nursing (CV-BC)
* Cardiovascular Registered Nurse (CVRN-BC)
* Critical Care Registered Nurse (CCRN)
* Clinical Nurse Leader (CNL)
* Certified Nurse Manager and Leader (CNML)
* Nurse Executive - Board Certified or Nurse Executive Advanced - Board Certified (NE-BC/NEA-BC)
* For Technologist candidates:
* Registered Cardiovascular Invasive Specialist (RCIS)
* Registered Cardiac Catheterization Technologist (RCCT)
* Cardiovascular Credentialing International (CCI) certification
Physical Demands
* Standing Occasionally
* Walking Occasionally
* Sitting Constantly
* Lifting Rarely up to 20 lbs
* Carrying Rarely up to 20 lbs
* Pushing Rarely up to 20 lbs
* Pulling Rarely up to 20 lbs
* Climbing Rarely up to 20 lbs
* Balancing Rarely
* Stooping Rarely
* Kneeling Rarely
* Crouching Rarely
* Crawling Rarely
* Reaching Rarely
* Handling Occasionally
* Grasping Occasionally
* Feeling Rarely
* Talking Constantly
* Hearing Constantly
* Repetitive Motions Frequently
* Eye/Hand/Foot Coordination Frequently
Travel Requirements
* 50% Hybrid/remote with regular onsite presence required up to 50% travel across system hospitals and procedural areas. Flexibility to adjust schedule to support early procedures or late meetings as needed.
Description
Principal Advisor, Cath Lab (System‑Level Strategic Leader)
Reporting directly to the Senior Director of Perioperative and Procedural Services, the Principal Advisor for Cath Lab serves as the system's senior subject‑matter expert and strategic leader for this procedural domain. In this capacity, the leader will functions as an enterprise‑level authority responsible for establishing standard practices, policies, and procedures for daily operations. The role also provides oversight and input into the system capital replacement plan and operational KPIs. Additionally, this role leads accreditation readiness efforts and partners closely with the Quality Institute to ensure continued compliance across all UH locations. Operating within a matrixed structure, this role provides dotted‑line guidance to local operational leaders.
A Brief Overview
The Principal Advisor, Procedural Areas serves as a clinical and strategic subject matter expert and resource across the health system, providing expert consultation, strategic guidance, and performance oversight for the assigned procedural areas of expertise, such as Central Sterile Processing/High Level Disinfection (CSP/HLD), Operating Rooms (OR), Endoscopy, and Cath/Interventional Radiology (IR) Labs. This role supports standardization, quality improvement, and regulatory compliance across all facilities, working collaboratively with local leaders to drive excellence in patient care, operational efficiency, and staff development. This position holds dotted-line authority to influence and support local managers and directors, aligning practices with system-wide goals, although the depending on the area, they may have direct reports. This position will develop and implement standardized departmental policies, procedures, and quality objectives. The position will also gather, analyze, and share key performance indicators (KPIs) across the system to support transparency, promote accountability, and drive continuous improvement at both the local and system levels. Additionally, this position will lead the creation and maintenance of a system-wide education and competency plan in collaboration with others.
What You Will Do
* Key Responsibilities:
* System-Level Leadership & Strategic Oversight: Serve as the system-wide clinical expert for assigned procedural specialty (CSP/HLD, OR, Endoscopy, Cath/IR) based on evidence based best practices, protocols, and technological advancement to enhance patient safety, workflow efficiency and clinical outcomes.
* Collaborate with local leaders to standardize workflows, optimize scheduling, and improve throughput and resource utilization.
* Serve as a liaison between system leadership and local procedural teams, translating enterprise-wide strategy into operational execution. Assist local leaders to translate strategic goals into operational practices across facilities.
* Lead or support initiatives to improve efficiency, safety, and patient outcomes (e.g., turnover time, block utilization, scope management, radiation safety), by utilizing process improvement initiatives using Lean, Six Sigma, or PDSA methodologies.
* Depending on the assigned procedural area, this role may include direct reports and associated people management and local budgetary responsibilities.
* Policy Development & Standardization
* Develop, review, implement, and maintain system-wide policies, protocols, and standard operating procedures related to assigned area of expertise. Partner with local leadership to support training, ensure consistent application, and monitor compliance across all sites.
* Ensure alignment with current regulatory and accreditation standards (e.g., AORN, DNV, JCAHO, AAMI, CMS, ACC). Support local leaders in preparing for surveys, audits, and inspections, ensuring alignment with standards and documentation requirements.
* Promote consistent application of best practices across all sites, including technology integration, including electronic health records (EHR), image management systems, and inventory systems.
* Training, Education & Competency
* Assist in design and deliver ongoing education programs, competency assessments, and professional development plans throughout system.
* Provide subject matter expertise for local leaders during staff onboarding and ongoing professional development activities.
* Act as a subject matter expert in regulatory standards and clinical technologies.
* Quality Improvement & Data Analysis
* Analyze system-wide performance data, audit results, and dashboard metrics to identify trends and improvement opportunities. Monitor and analyze key performance indicators (KPIs) such as volume trends, case mix, supply costs, radiation exposure, and outcomes.
* Collaborate with local teams and system leadership to develop and implement targeted quality improvement initiatives. Support audit activities and review documentation accuracy to ensure compliance with safety and quality standards.
* Participate in or lead root cause analyses and process improvement initiatives
* Regulatory & Compliance Support
* Stay current with evolving regulatory requirements and industry standards. including infection control, safety, and documentation standards.
* Serve as the internal resource for regulatory and accreditation readiness, supporting local managers in compliance efforts.
* Review and revise system-wide recommendations based on regulatory updates.
* Resource & Inventory Management
* Provide expert advice on system-wide capital equipment, instrumentation, supply chain strategies.
* Support budget planning and procurement efforts in collaboration with system and local hospital leadership.
Additional Responsibilities
* Participate in system-wide committees, task forces, and strategic initiatives.
* Foster a culture of safety, learning, and clinical excellence.
* Ensure adherence to PHI and confidentiality standards.
* Perform other duties as assigned.
* Performs other duties as assigned.
* Complies with all policies and standards.
* For specific duties and responsibilities, refer to documentation provided by the department during orientation.
* Must abide by all requirements to safely and securely maintain Protected Health Information (PHI) for our patients. Annual training, the UH Code of Conduct and UH policies and procedures are in place to address appropriate use of PHI in the workplace.
Qualifications
Education
* Bachelor's Degree Nursing, Healthcare Administration, Cardiovascular Technology, Radiologic Technology, or related field (Required)
* Master's Degree MSN, MHA, MBA, or related (Preferred)
Work Experience
* Minimum of 7-10 years of clinical and operational leadership experience in cardiac catheterization lab, interventional cardiology, electrophysiology lab, structural heart program (Required)
* 3+ years system-level or multi-site experience, preferably in a matrixed organization. (Required)
Preferred Experience:
- Experience managing budgets, capital planning, staffing models, quality metrics, and regulatory compliance
- Academic medical center or tertiary/quaternary care system experience preferred
Knowledge, Skills, & Abilities
* Strong analytical and data interpretation skills. (Required proficiency)
* Excellent communication, facilitation, and relationship-building abilities. (Required proficiency)
* Ability to influence without direct authority and navigate complex organizational structures. (Required proficiency)
* Deep understanding of regulatory and accreditation standards. (Required proficiency)
Licenses and Certifications
* Active clinical license or certification (e.g., RN, RCIS, RCES, ARRT, CRCST, CSPDT, CER,CIS) required based on specialty. (Required)
* Specialty certifications (e.g., CNOR, CVRN, CEPS, Lean Six Sigma) (Preferred)
* Preferred certifications:
* For Registered Nurse candidates:
* Cardiac - Vascular Nursing (CV-BC)
* Cardiovascular Registered Nurse (CVRN-BC)
* Critical Care Registered Nurse (CCRN)
* Clinical Nurse Leader (CNL)
* Certified Nurse Manager and Leader (CNML)
* Nurse Executive - Board Certified or Nurse Executive Advanced - Board Certified (NE-BC/NEA-BC)
* For Technologist candidates:
* Registered Cardiovascular Invasive Specialist (RCIS)
* Registered Cardiac Catheterization Technologist (RCCT)
* Cardiovascular Credentialing International (CCI) certification
Physical Demands
* Standing Occasionally
* Walking Occasionally
* Sitting Constantly
* Lifting Rarely up to 20 lbs
* Carrying Rarely up to 20 lbs
* Pushing Rarely up to 20 lbs
* Pulling Rarely up to 20 lbs
* Climbing Rarely up to 20 lbs
* Balancing Rarely
* Stooping Rarely
* Kneeling Rarely
* Crouching Rarely
* Crawling Rarely
* Reaching Rarely
* Handling Occasionally
* Grasping Occasionally
* Feeling Rarely
* Talking Constantly
* Hearing Constantly
* Repetitive Motions Frequently
* Eye/Hand/Foot Coordination Frequently
Travel Requirements
* 50% Hybrid/remote with regular onsite presence required up to 50% travel across system hospitals and procedural areas. Flexibility to adjust schedule to support early procedures or late meetings as needed.
U
Principle Advisor, Procedural Areas - CSP
✦ New 🏢 University Hospitals
Salary not disclosed
Job Description
Description
Principal Advisor, Central Sterile Processing (System‑Level Strategic Leader)
Reporting directly to the Senior Director of Perioperative and Procedural Services, the Principal Advisor for CSP serves as the system's senior subject‑matter expert and strategic leader for this procedural domain. In this capacity, the leader will functions as an enterprise‑level authority responsible for establishing standard practices, policies, and procedures for daily operations. The role also provides oversight and input into the system capital replacement plan and operational KPIs. Additionally, this role leads accreditation readiness efforts and partners closely with the Quality Institute to ensure continued compliance across all UH locations. Operating within a matrixed structure, this role provides dotted‑line guidance to local operational leaders and manages a small, focused team responsible for delivering systemwide initiatives
A Brief Overview
The Principal Advisor, Procedural Areas serves as a clinical and strategic subject matter expert and resource across the health system, providing expert consultation, strategic guidance, and performance oversight for the assigned procedural areas of expertise, such as Central Sterile Processing/High Level Disinfection (CSP/HLD), Operating Rooms (OR), Endoscopy, and Cath/Interventional Radiology (IR) Labs. This role supports standardization, quality improvement, and regulatory compliance across all facilities, working collaboratively with local leaders to drive excellence in patient care, operational efficiency, and staff development. This position holds dotted-line authority to influence and support local managers and directors, aligning practices with system-wide goals, although the depending on the area, they may have direct reports. This position will develop and implement standardized departmental policies, procedures, and quality objectives. The position will also gather, analyze, and share key performance indicators (KPIs) across the system to support transparency, promote accountability, and drive continuous improvement at both the local and system levels. Additionally, this position will lead the creation and maintenance of a system-wide education and competency plan in collaboration with others.
What You Will Do
* Key Responsibilities:
* System-Level Leadership & Strategic Oversight: Serve as the system-wide clinical expert for assigned procedural specialty (CSP/HLD, OR, Endoscopy, Cath/IR) based on evidence based best practices, protocols, and technological advancement to enhance patient safety, workflow efficiency and clinical outcomes.
* Collaborate with local leaders to standardize workflows, optimize scheduling, and improve throughput and resource utilization.
* Serve as a liaison between system leadership and local procedural teams, translating enterprise-wide strategy into operational execution. Assist local leaders to translate strategic goals into operational practices across facilities.
* Lead or support initiatives to improve efficiency, safety, and patient outcomes (e.g., turnover time, block utilization, scope management, radiation safety), by utilizing process improvement initiatives using Lean, Six Sigma, or PDSA methodologies.
* Depending on the assigned procedural area, this role may include direct reports and associated people management and local budgetary responsibilities.
* Policy Development & Standardization
* Develop, review, implement, and maintain system-wide policies, protocols, and standard operating procedures related to assigned area of expertise. Partner with local leadership to support training, ensure consistent application, and monitor compliance across all sites.
* Ensure alignment with current regulatory and accreditation standards (e.g., AORN, DNV, JCAHO, AAMI, CMS, ACC). Support local leaders in preparing for surveys, audits, and inspections, ensuring alignment with standards and documentation requirements.
* Promote consistent application of best practices across all sites, including technology integration, including electronic health records (EHR), image management systems, and inventory systems.
* Training, Education & Competency
* Assist in design and deliver ongoing education programs, competency assessments, and professional development plans throughout system.
* Provide subject matter expertise for local leaders during staff onboarding and ongoing professional development activities.
* Act as a subject matter expert in regulatory standards and clinical technologies.
* Quality Improvement & Data Analysis
* Analyze system-wide performance data, audit results, and dashboard metrics to identify trends and improvement opportunities. Monitor and analyze key performance indicators (KPIs) such as volume trends, case mix, supply costs, radiation exposure, and outcomes.
* Collaborate with local teams and system leadership to develop and implement targeted quality improvement initiatives. Support audit activities and review documentation accuracy to ensure compliance with safety and quality standards.
* Participate in or lead root cause analyses and process improvement initiatives
* Regulatory & Compliance Support
* Stay current with evolving regulatory requirements and industry standards. including infection control, safety, and documentation standards.
* Serve as the internal resource for regulatory and accreditation readiness, supporting local managers in compliance efforts.
* Review and revise system-wide recommendations based on regulatory updates.
* Resource & Inventory Management
* Provide expert advice on system-wide capital equipment, instrumentation, supply chain strategies.
* Support budget planning and procurement efforts in collaboration with system and local hospital leadership.
Additional Responsibilities
* Participate in system-wide committees, task forces, and strategic initiatives.
* Foster a culture of safety, learning, and clinical excellence.
* Ensure adherence to PHI and confidentiality standards.
* Perform other duties as assigned.
* Performs other duties as assigned.
* Complies with all policies and standards.
* For specific duties and responsibilities, refer to documentation provided by the department during orientation.
* Must abide by all requirements to safely and securely maintain Protected Health Information (PHI) for our patients. Annual training, the UH Code of Conduct and UH policies and procedures are in place to address appropriate use of PHI in the workplace.
Qualifications
Education
* Bachelor's Degree Nursing, Healthcare Administration, Cardiovascular Technology, Radiologic Technology, or related field (Required)
* Master's Degree MSN, MHA, MBA, or related (Preferred)
Work Experience
* Minimum of 7-10 years of clinical and operational leadership experience in sterile processing (Required)
* 3+ years system-level or multi-site experience, preferably in a matrixed organization. (Required)
Knowledge, Skills, & Abilities
* Strong analytical and data interpretation skills. (Required proficiency)
* Excellent communication, facilitation, and relationship-building abilities. (Required proficiency)
* Ability to influence without direct authority and navigate complex organizational structures. (Required proficiency)
* Deep understanding of regulatory and accreditation standards. (Required proficiency)
Licenses and Certifications
* Active clinical license or certification (e.g., RN, RCIS, RCES, ARRT, CRCST, CSPDT, CER,CIS) required based on specialty. (Required)
* Specialty certifications (e.g., CNOR, CVRN, CEPS, Lean Six Sigma) (Preferred)
* Preferred Certifications: Certified Sterile Processing Manager (CSPM) or Certified Healthcare Leader (CHL).
Physical Demands
* Standing Occasionally
* Walking Occasionally
* Sitting Constantly
* Lifting Rarely up to 20 lbs
* Carrying Rarely up to 20 lbs
* Pushing Rarely up to 20 lbs
* Pulling Rarely up to 20 lbs
* Climbing Rarely up to 20 lbs
* Balancing Rarely
* Stooping Rarely
* Kneeling Rarely
* Crouching Rarely
* Crawling Rarely
* Reaching Rarely
* Handling Occasionally
* Grasping Occasionally
* Feeling Rarely
* Talking Constantly
* Hearing Constantly
* Repetitive Motions Frequently
* Eye/Hand/Foot Coordination Frequently
Travel Requirements
* 50% Hybrid/remote with regular onsite presence required. Up to 50% travel across system hospitals and procedural areas. Flexibility to adjust schedule to support early procedures or late meetings as needed.
Description
Principal Advisor, Central Sterile Processing (System‑Level Strategic Leader)
Reporting directly to the Senior Director of Perioperative and Procedural Services, the Principal Advisor for CSP serves as the system's senior subject‑matter expert and strategic leader for this procedural domain. In this capacity, the leader will functions as an enterprise‑level authority responsible for establishing standard practices, policies, and procedures for daily operations. The role also provides oversight and input into the system capital replacement plan and operational KPIs. Additionally, this role leads accreditation readiness efforts and partners closely with the Quality Institute to ensure continued compliance across all UH locations. Operating within a matrixed structure, this role provides dotted‑line guidance to local operational leaders and manages a small, focused team responsible for delivering systemwide initiatives
A Brief Overview
The Principal Advisor, Procedural Areas serves as a clinical and strategic subject matter expert and resource across the health system, providing expert consultation, strategic guidance, and performance oversight for the assigned procedural areas of expertise, such as Central Sterile Processing/High Level Disinfection (CSP/HLD), Operating Rooms (OR), Endoscopy, and Cath/Interventional Radiology (IR) Labs. This role supports standardization, quality improvement, and regulatory compliance across all facilities, working collaboratively with local leaders to drive excellence in patient care, operational efficiency, and staff development. This position holds dotted-line authority to influence and support local managers and directors, aligning practices with system-wide goals, although the depending on the area, they may have direct reports. This position will develop and implement standardized departmental policies, procedures, and quality objectives. The position will also gather, analyze, and share key performance indicators (KPIs) across the system to support transparency, promote accountability, and drive continuous improvement at both the local and system levels. Additionally, this position will lead the creation and maintenance of a system-wide education and competency plan in collaboration with others.
What You Will Do
* Key Responsibilities:
* System-Level Leadership & Strategic Oversight: Serve as the system-wide clinical expert for assigned procedural specialty (CSP/HLD, OR, Endoscopy, Cath/IR) based on evidence based best practices, protocols, and technological advancement to enhance patient safety, workflow efficiency and clinical outcomes.
* Collaborate with local leaders to standardize workflows, optimize scheduling, and improve throughput and resource utilization.
* Serve as a liaison between system leadership and local procedural teams, translating enterprise-wide strategy into operational execution. Assist local leaders to translate strategic goals into operational practices across facilities.
* Lead or support initiatives to improve efficiency, safety, and patient outcomes (e.g., turnover time, block utilization, scope management, radiation safety), by utilizing process improvement initiatives using Lean, Six Sigma, or PDSA methodologies.
* Depending on the assigned procedural area, this role may include direct reports and associated people management and local budgetary responsibilities.
* Policy Development & Standardization
* Develop, review, implement, and maintain system-wide policies, protocols, and standard operating procedures related to assigned area of expertise. Partner with local leadership to support training, ensure consistent application, and monitor compliance across all sites.
* Ensure alignment with current regulatory and accreditation standards (e.g., AORN, DNV, JCAHO, AAMI, CMS, ACC). Support local leaders in preparing for surveys, audits, and inspections, ensuring alignment with standards and documentation requirements.
* Promote consistent application of best practices across all sites, including technology integration, including electronic health records (EHR), image management systems, and inventory systems.
* Training, Education & Competency
* Assist in design and deliver ongoing education programs, competency assessments, and professional development plans throughout system.
* Provide subject matter expertise for local leaders during staff onboarding and ongoing professional development activities.
* Act as a subject matter expert in regulatory standards and clinical technologies.
* Quality Improvement & Data Analysis
* Analyze system-wide performance data, audit results, and dashboard metrics to identify trends and improvement opportunities. Monitor and analyze key performance indicators (KPIs) such as volume trends, case mix, supply costs, radiation exposure, and outcomes.
* Collaborate with local teams and system leadership to develop and implement targeted quality improvement initiatives. Support audit activities and review documentation accuracy to ensure compliance with safety and quality standards.
* Participate in or lead root cause analyses and process improvement initiatives
* Regulatory & Compliance Support
* Stay current with evolving regulatory requirements and industry standards. including infection control, safety, and documentation standards.
* Serve as the internal resource for regulatory and accreditation readiness, supporting local managers in compliance efforts.
* Review and revise system-wide recommendations based on regulatory updates.
* Resource & Inventory Management
* Provide expert advice on system-wide capital equipment, instrumentation, supply chain strategies.
* Support budget planning and procurement efforts in collaboration with system and local hospital leadership.
Additional Responsibilities
* Participate in system-wide committees, task forces, and strategic initiatives.
* Foster a culture of safety, learning, and clinical excellence.
* Ensure adherence to PHI and confidentiality standards.
* Perform other duties as assigned.
* Performs other duties as assigned.
* Complies with all policies and standards.
* For specific duties and responsibilities, refer to documentation provided by the department during orientation.
* Must abide by all requirements to safely and securely maintain Protected Health Information (PHI) for our patients. Annual training, the UH Code of Conduct and UH policies and procedures are in place to address appropriate use of PHI in the workplace.
Qualifications
Education
* Bachelor's Degree Nursing, Healthcare Administration, Cardiovascular Technology, Radiologic Technology, or related field (Required)
* Master's Degree MSN, MHA, MBA, or related (Preferred)
Work Experience
* Minimum of 7-10 years of clinical and operational leadership experience in sterile processing (Required)
* 3+ years system-level or multi-site experience, preferably in a matrixed organization. (Required)
Knowledge, Skills, & Abilities
* Strong analytical and data interpretation skills. (Required proficiency)
* Excellent communication, facilitation, and relationship-building abilities. (Required proficiency)
* Ability to influence without direct authority and navigate complex organizational structures. (Required proficiency)
* Deep understanding of regulatory and accreditation standards. (Required proficiency)
Licenses and Certifications
* Active clinical license or certification (e.g., RN, RCIS, RCES, ARRT, CRCST, CSPDT, CER,CIS) required based on specialty. (Required)
* Specialty certifications (e.g., CNOR, CVRN, CEPS, Lean Six Sigma) (Preferred)
* Preferred Certifications: Certified Sterile Processing Manager (CSPM) or Certified Healthcare Leader (CHL).
Physical Demands
* Standing Occasionally
* Walking Occasionally
* Sitting Constantly
* Lifting Rarely up to 20 lbs
* Carrying Rarely up to 20 lbs
* Pushing Rarely up to 20 lbs
* Pulling Rarely up to 20 lbs
* Climbing Rarely up to 20 lbs
* Balancing Rarely
* Stooping Rarely
* Kneeling Rarely
* Crouching Rarely
* Crawling Rarely
* Reaching Rarely
* Handling Occasionally
* Grasping Occasionally
* Feeling Rarely
* Talking Constantly
* Hearing Constantly
* Repetitive Motions Frequently
* Eye/Hand/Foot Coordination Frequently
Travel Requirements
* 50% Hybrid/remote with regular onsite presence required. Up to 50% travel across system hospitals and procedural areas. Flexibility to adjust schedule to support early procedures or late meetings as needed.
Principal Electrical Controls Engineer - Data Center Infrastructure
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:?
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Principal Electrical Controls Engineer - Data Center Infrastructure (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Senior Electrical Design Expert - Remote Data Center Integration (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Sr. Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization : Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.
The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
Product & System Design :
- Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
- Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
- Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
- Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
- Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
- Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
- Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
- Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses
Factory & Facility Integration :
- Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
- Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
- Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
- Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.
Fabrication & Implementation :
- Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
- Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
- Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
- Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
- Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.
Controls Architecture :
- Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
Leadership & Documentation :
- Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
- Mentor junior engineers and provide technical leadership across cross-functional teams.
- Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability
How will you get here?
Education :
- Bachelor’s Degree in Electrical Engineering or related engineering discipline.
Experience :
- 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
- Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
- Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
- Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
- Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
Preferred Qualifications:
- Master’s Degree in Electrical Engineering
- Active Professional Engineer (PE) license
- Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
- Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
- Hands-on experience with panel fabrication, wiring, and system integration
- Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
- Experience in WindChill and DevOps
Remote working/work at home options are available for this role.
Senior Electrical Systems Engineer - Critical Infrastructure (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization : Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education :
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience :
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Principal Electrical Controls Engineer - Data Center Infrastructure - Remote flexibility with travel opportunities (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization : Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education :
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience :
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Principal Electrical Controls Engineer - Data Center Infrastructure (REMOTE) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Controls Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Principal Electrical Controls Engineer - Data Center Infrastructure (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization : Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education :
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience :
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
jobs by
