Medium Jobs in Usa

Project Description:

In this role, you will be responsible for the collaboration and interactions in the review of specific customer application(s) using electric technologies for the Low and Medium Voltage power systems for Production Enhancement Product Service Lines (PSL). Also, you will support the delivery/commissioning of these state-of-the-art technology solutions for challenging applications in oil & gas to improve operational efficiency, lower costs and emissions, and maximize well productivity. You will need to be creative, dynamic, passionate, and data-driven with the ability to effectively communicate and influence the internal teams and/or customers to deliver best-in-class solutions. This is a high visibility position where the incumbent is expected to frequently interact with Technology, business leadership, and customers to formulate and plan technology delivery for electrical power systems applications.

Responsibilities:

- Cultivate a culture of collaboration in the electrical low and medium voltage power systems to ensure that state-of-the-art technology is applied in the development of new customer technical solutions.

- Hands on experience in the development of applications of electrical equipment and systems including micro-grids, utility electrical interfaces, natural gas (NG) generators and turbines using industrial electrical distribution, medium voltage switchgear, transformers, motor control centers, AC motors, and protection systems for mobile applications.

- Actively collaborate with other personnel engaged in equipment design, maintenance, and operation to ensure safe, reliable deployment of high-performance solutions meeting customer requirements.

- Interact closely with suppliers to ensure performance, reliability and quality of components and subsystems.

Mandatory Skills Description:

-Minimum of bachelor's degree in electrical engineering with at least 5 years of electrical power systems engineering experience or related/applicable experience. Master's degree is highly desired but not required.

-Experience working with customers in the use/application/selection of mobile electrical gear to solve customer specific solutions, and knowledgeable with electrical analysis and in the use of commercial software such as SKM preferred, or ETAP, etc.,

-Experience with large-scale industrial processes (chemical, pharmaceutical, oil & gas refining) is essential to be successful in this role.

-Understanding of the commissioning of power systems solutions (low & medium voltage), using utility power, micro-grids, and mobile power generation (NG gas turbine & recip. engines), and demonstrated troubleshooting skills is desired, but not required.

Nice-to-Have Skills Description:

-Experience in medium voltage power generation and/or distribution for oil & gas applications preferred.

Purpose

Supports the plant or operations manager and supervisors in fulfilling all human resource responsibilities in accordance with federal/state law, company policy, labor agreement and Roseburg Core Values.

Key Responsibilities

• Administer and support hiring process to meet facility staffing needs
• Oversee and review the on-boarding process
• Implements company and plant related policies
• Informs employees and supports the enforcement of appropriate policy, labor agreement and work rules
• Presents human resource related training
• Supports efforts to achieve facility’s performance KPI’s
• Lead all HR initiatives and goals with the support of other HR team members as appropriate
• Create a culture of positive employee relations and communications
• Interpretation, education and enforcement of appropriate policy, labor agreement and work rules
• Provide support, coach, and mentor management members on employee issues
• Participates in internal investigations
• Grievance process facilitation as appropriate
• Administer and support leave of absence process
• Administers drug testing policy and procedures
• Responsible for the plant bid system
• Collaborate with company office and other facilities as required
• Champion Company core values

Required Qualifications

• One (1) to six (6) years related work experience; or any equivalent combination of experience and training that demonstrates the ability to perform the key responsibilities of this position
• Proven knowledge of employment/labor laws
• Proven solutions oriented leader
• Maintain the highest ethical standards in dealing with confidential information
• Maintain composure in high-pressure situations
• Excellent listening, written and oral communication skills
• Ability to work in and maintain a highly functional team environment with a results driven approach
• Excellent interpersonal skills
• Proficiency in Word and Excel

Preferred Qualifications

• Associates or Bachelors’ degree in HR, Industrial Relations, Business, or related field preferred.
• PHR/SPHR, SHRM-CP/SCP certifications

About Roseburg Forest Products

Founded in 1936, Roseburg Forest Products is a privately held company based in Springfield, Oregon. With a legacy in sustainable forestry and innovative wood products manufacturing, we are a leading North American producer of engineered wood, exterior trim, plywood, lumber, and medium density fiberboard (MDF). Our products shape and support homes, workplaces, and industries, while our timberlands protect forest health for future generations and provide high-quality wood fiber for our integrated operations.

At Roseburg, we believe in making lives better from the ground up through the products we create, the relationships we build, and the communities we support. Our team of passionate professionals value safety, integrity, and excellence in all we do. From the mill to the forest to the office, you’ll find opportunities to grow and contribute to a company that cares for people, communities, and the environment.

Learn more about who we are and what we do at

Benefits at Roseburg

Roseburg offers a comprehensive and competitive benefits package to support the health, financial security, and well-being of our team members and their families. Key benefits include:

• Bonus opportunities based on company and individual performance
• 401(k) with up to 4% company match and 3% automatic company contribution
• Vacation starting at 3 weeks and 11 paid holidays per year
• Company-sponsored medical, dental, and vision insurance
• Company-paid life, AD&D, and long-term disability insurance options
• Mental health benefits for the entire family, including 8 free annual sessions per person
• Wellness programs and incentives, including biometric screenings & wellness challenges
• Paid time away from work for illness or injury, as well as paid parental bonding time
• Health Savings Account (HSA) with company contributions and Flexible Spending Account (FSA) options
• Company matchfor charitable contributions
• Education assistance and professional development support
• Financial and retirement counseling
• Additional voluntary benefits including pet insurance, student loan refinancing, and exclusive scholarships for child dependents, and more!

AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

Growing, Succeeding and Designing Our Future Together

We are looking for future team members who are excited to make an impact. As an employee-owned company, we are dedicated to the betterment of our clients, our communities, and our employees. Your contribution is key to the quality of service SMA delivers. Throughout your career with SMA, there will be opportunities for you to improve the skills you need to achieve your professional goals. We encourage you to explore innovative ways to develop solutions while collaborating with team members inside and outside the organization by providing the framework for you to find success.

We don't just talk about being client-focused; the engineers, scientists, surveyors, technicians and other professionals at SMA live and breathe it. After all, we are members of the communities we help.

Why Join Us?

• Ownership & Impact: Experience the unique advantage of employee ownership, where your contributions directly shape our company's future.
• Community Focus: We're deeply committed to the communities we serve. Our engineers, scientists, surveyors, and professionals are dedicated to delivering innovative solutions that make a real difference.
• Growth & Development: We invest in your professional growth, providing opportunities to expand your skills and collaborate with a dynamic team.
• Proven Excellence: With a legacy dating back to 1985, SMA is a leading engineering firm, renowned for our commitment to infrastructure, water safety, environmental remediation, and more.

SUMMARY:

Souder, Miller & Associates is recruiting a full time Survey CAD Tech II-IV for the Geomatics department in the Las Cruces, NM office. We are seeking a dynamic drafter that can multi-task between numerous projects while maintaining effective communication with the remainder of the team. Need the ability to produce Survey Boundary Plats, create surface models, perform office calculations, sometimes managed complex and large plan sets. Have the ability to work under pressure, meet deadlines, meet budgets, be a team player. The CAD Tech II-IV will directly support and coordinate with the Project Manager and design team. The candidate must be familiar with the application of principles, methods, and techniques of engineering and surveying technology. We are looking for someone who can complete the variety of tasks in AutoCAD Civil 3D.

RESPONSIBILITIES:

• Knowledge of national CAD Standards. Must be able to proficiently operate AutoCAD Civil3D software.
• Assists in the analysis of reports, maps, drawings, tests and aerial photographs to plan and design projects.
• Able to process various forms of data provided such as xml files, point data, GIS data, shape files, Landdesktop etc.
• Create, utilize, and modify plan, profiles, alignments, sample lines, and section views.
• Must understand the plan and profiles, able to provide detailed and accurate drawings.
• Create, manage, and edit line type styles, text styles, label styles, point group styles, etc.
• Create, manage, and edit design surfaces through the use of feature lines, corridors, 3-D Polylines, point data etc. or a combination of these components.
• Understand and be able to operate plans that utilize ctb files and stb files.
• Create, manage, and edit sheet set managers for complex projects while coordinating with support staff.
• Prepare medium to complex design computations and quantity estimates.
• Perform design of portions of non-routine projects or entire routine projects under infrequent supervision.
• Assist in the preparation of drawings, and exhibits for reports, specifications, plans, construction schedules and permits for projects.
• Perform CAD drafting on a regular basis to reduce designs to final drawings.
• Understands surveying terminology and other concepts related to civil engineering and construction practices.
• Responsible for job specific quality system tasks as defined in quality manual.
• Ability to work with a medium level of supervision.
• Assist in the development of probable cost estimates for projects within the department.
• Design review as well as some assistance preparing bids.
• Implementation of regulatory standards and permitting requirements.
• Train other staff members on CAD Standards, as appropriate.

Salary Grade: $22.00 - $34.00 (Hourly)

Travel: None

REQUIREMENTS:

• High school diploma or GED required. Associate or bachelor’s degree preferred.
• Minimum 2-3 years of experience required in related field.
• Minimum 1-2 years of experience with AutoCAD Civil 3D required.
• Must have a valid driver's license and acceptable driving record.
• Must be able to pass drug and alcohol test.

This is not a remote position.

Please note: We are unable to offer visa sponsorship for this position. Candidates must be authorized to work in the United States without current or future sponsorship.

BENEFITS:

• Health, Dental, Vision, 401K Retirement Plan, Employee Stock Options (ESOP), Life/ADD/Short Term/Long Term Insurance, Voluntary Insurance, FSA, Dependent Care.
• Employee Wellness Program, Employee Assistance Program, Flexible work schedule, ID Theft Protection plan.
• Paid Time Off, Jury Duty Pay, Comp Time.
• Tuition Reimbursement and Professional dues.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk or hear; sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee must be able and willing to frequently lift and/or move 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and the ability to adjust focus.

WORK ENVIRONMENT:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the employee occasionally works in outside weather conditions.
• The noise level in the work environment is usually moderate.

Why SMA?

Since 1985, Souder, Miller & Associates has been a leader in providing engineering, survey, and environmental solutions across New Mexico. As the third-largest engineering firm in New Mexico, we pride ourselves on delivering innovative and sustainable solutions to complex challenges, from designing public infrastructure to environmental remediation. Our employee-driven culture fosters a sense of ownership and community where everyone’s contribution is recognized and valued.

At SMA, you’re not just a team member – you’re an integral part of our journey to success, a mentor to the next generation of engineers, and a leader who shapes the future of the communities we serve.

If you’re ready to make a lasting impact, drive innovation, and grow with an employee-owned firm, we want to hear from you. Apply now to be part of our legacy.

KGS Group is seeking a Senior Electrical Engineer to join our growing practice in Bellevue, WA or Granite Bay, CA.

About Us

We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We’re different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right.

As an employee-owned company, we’re invested in our work and our people. Working with us means you’ll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you’ll have countless opportunities to learn and grow.

Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team!

The Role

As a Senior Electrical Engineer, you will be responsible for providing engineering inputs integral to both small and large scale hydro projects. You will lead and mentor teams, support management of production and coordinate delivery of engineering inputs often with multi-disciplinary project team members and senior stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our powerhouse and energy capabilities and working with key staff in growing that aspect of the business.

You’ll also be involved in supporting project management duties, liaising with both internal and external clients as well as assisting with guiding and mentoring graduate engineers within the team. In this role you will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out onsite visits for rehabilitation and upgrades to dams, hydroelectric facilities and new hydroelectric developments. You will participate in design and play a large role in mentoring the team. You will be working in a collaborative environment with a great team of engineers and scientists, and you will also interface directly with clients.

Key Responsibilities

• Provide input to those managing and executing multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects.
• Establish and facilitate connections with other departments to support and enhance service delivery.
• Work collaboratively with other disciplines and multidisciplinary project teams to execute project deliverables, as well as ensure that quality objectives, schedules and budgets are met.
• Support and collaborate on new business opportunities with new and existing clients, as well as supporting business development efforts for electrical work.
• Manage and mentor junior staff.
• Design modifications to, or entirely new, electrical, instrumentation and balance of plant systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations.
• Manage and execute multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects involving water resources, flood control and hydroelectric sectors.
• Design modifications to, or entirely new, electrical, instrumentation, protection, and balance of plant systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations.
• Perform electrical calculations.
• Conduct inspections and support project work on site as required.
• Edit and prepare design specifications.
• Provide detailed designs and coordination of facilities with team members.
• Conduct QA/QC reviews and provide leadership and mentoring related to KGS’s QA/QC process.
• Contribute to the development of the electrical engineering practice at KGS by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks.
• Perform other duties as assigned.

About You

• Minimum of a Bachelor of Science (BS) degree in Electrical Engineering from a recognized university. A post graduate degree would be an asset.
• Minimum of 15 years of experience in electrical engineering with demonstrated project management skills (tracking budgets and meeting schedules).
• Must be registered as a Professional Engineer (P.E.) in California, Oregon, or Washington, as well as eligible for registration as a professional engineer in other states by comity through NCEES.
• Demonstrated leadership of electrical design projects in the industrial power generation field, with experience managing and mentoring younger staff.
• Previous consulting experience is preferred.
• Excellent verbal and written communication skills are required.
• Candidate must be able to work independently with minimal supervision.
• Client interaction: must be able to effectively assume a lead role as project engineer at project meetings and communicate project and technical information.
• Demonstrated experience in site investigations, condition assessments, design and construction support are preferred.
• Experience with station service distribution (all voltages), medium voltage equipment, fixed bus power distribution systems, Programmable Logic Controller (PLC) automation (for equipment control), generators and transformers including related monitoring systems, communication systems, system grounding, hoists and gate automation, and balance of plant systems for hydroelectric stations preferred, but industrial experience will be considered.
• Experience with the following would be considered an asset:
• Backup power systems (including Uninterruptible Power Supply (UPS), Direct Current systems and fuel fired backup)
• Lighting (including emergency and exit lighting systems)
• Fiber and copper structured cable systems, and associated networking equipment
• Distributed Control System (DCS) and PLC Automation, Human Machine Interface (HMI) and Remote Terminal Unit (RTU) integration (including any programming experience)
• Protection systems experience, including specifying, setting and verifying (include reference to voltages)
• Load flow analysis, system modelling, arc-flash, grounding, and other electrical studies (include reference to software used and any training)
• North American Electric Reliability Corporation (NERC)/Critical Infrastructure Protection (CIP) planning
• Physical or cyber security planning or design
• Unit outage planning
• Other renewable energy experience
• Travel to project sites is usually limited but is required depending on project/client requirements.
• Must possess a valid driver’s license and the ability/willingness to undergo security clearance checks.
• Have a drive, attitude, and commitment to being an active participant in our employee-owned culture is a must.

The salary range for this position is $130,000 to $180,000 annually.

Please note that the salary ranges mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate’s experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization.

KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package.

KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process.

Job Title: Validation and Verification Engineer - Electric Machines

Location: Fargo, ND

Job Type: Full-Time

Position Overview

We are seeking a highly motivated Product Verification & Validation (PV&V) Engineer to support electric machines utilized across a diverse portfolio of heavy equipment, including agricultural tractors, construction machinery, turf equipment, and golf products.

This role offers the opportunity to work within a collaborative and innovative engineering environment, contributing to multiple product lines and diverse laboratory settings. The position also provides exposure to emerging technologies, including automation and AI applications within PV&V workflows.

Key Responsibilities

As a PV&V Engineer, you will:

• Develop and execute Product Verification & Validation (PV&V) plans, define validation activities, document work within internal PV&V systems, track progress, and report Activity Completion Rating (ACR) metrics to leadership.
• Collaborate with cross-functional internal teams and external partners to define, execute, and deliver validation activities using laboratory testing, field testing, and electric machine teardowns.
• Validate safety, performance, quality, reliability, durability, and cost targets for electric machines.
• Interpret and apply applicable standards, specifications, and regulatory requirements relevant to electric rotating machines and their applications.
• Execute small- to medium-scale engineering projects in alignment with established program management processes.
• Develop and maintain comprehensive technical documentation, ensuring proper version control and data integrity.
• Participate in professional development initiatives, industry training, conferences, and technical knowledge-building activities.

Required Qualifications

• Minimum of 2 years of experience developing PV&V plans, activities, work requests, summaries, and schedules.
• Minimum of 2 years of experience working with rotating components, electric machine design, testing, or implementation.
• Hands-on experience with data acquisition systems and instrumentation such as accelerometers, thermistors, current transducers, and vector network analyzers.
• Strong written and verbal communication skills.
• Demonstrated ability to prioritize and schedule PV&V activities effectively.
• Willingness and ability to travel up to 20%.
• Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or a related engineering discipline.

Preferred Qualifications

• Knowledge of electric drivetrain components, including inverters, connectors, and energy storage systems.
• Familiarity with AI-based applications in PV&V or test automation environments.
• Advanced understanding of electric machine design principles, including:
• Continuous and peak load evaluation
• Electromagnetic fundamentals
• Bearings and insulation systems
• Cooling methodologies
• Manufacturability considerations
• Experience with accelerated life testing methodologies.
• Ability to work independently and provide technical direction for validation and engineering improvements.
• Strong project tracking and risk identification skills.
• Experience managing engineering projects with minimal supervision.
• Proficiency with PLM/CAD tools such as Windchill, Creo, or equivalent systems.
• Experience validating electric motors in real-world operating environments.

Standards & Regulatory Knowledge (Highly Preferred)

Experience applying industry standards related to electrical rotating components, including but not limited to:

• IEC 60034 series
• IEC 60529
• IEC 60664
• IEC 60068 series
• IEC 60695 series
• IEC 61180 series
• IEC 61800 series
• ISO 6469
• NEMA MG1
• UL 746C
• NEC compliance standards

My Client, a mid-size turnkey Engineering, Procurement and Construction specialist providing critical infrastructure services to the energy and utilities markets across the USA, is looking for a Project Field Engineer specializing in substation projects, for a project in Delta UT.

The ideal candidate will have a minimum of 5 years of relevant experience in the field and will be responsible for supporting electrical substations construction teams. To be considered you must have completed 3 full projects at least and have a stable work history. This role requires a deep understanding of electrical engineering principles, and the ability to work collaboratively with various stakeholders to ensure the successful completion of projects. The position is required to provide technical guidance and support to the client's construction teams, as well as be the teams direct link back to the broader engineering team on the project.

Duties

• Acting as the main technical expert on site, offering guidance to construction crews and subcontractors
• Making sure that the project adheres to engineering and design specifications, industry standards, and construction regulations
• Working independently or as part of the construction team to handle issues that arise.
• Support the resolution of construction issues, deviations from plans, unforeseen challenges, and collaboration with the Design team for resolutions
• Identifying potential risks and implementing preventive measures to minimize project delays, cost overruns and safety hazards.
• Processing of submittals and RFI’s
• Maintain accurate project documentation for field markup
• Support plan review and approval process with local and state municipalities, as required
• Report to Project Engineering Manager and Project Manager on status of open issues
• Performs any other duties assigned
• Adheres to internal standards, policies, and procedures

Preferred Experience and Education

• Minimum 5 years of relevant field experience in the construction of large high voltage substations
• An Electrical Engineering degree is essential
• Strong technical background in the installation and operation of electrical equipment and associated subsystems
• Familiarity with high, medium and low voltage installations, substation design, grounding, protection
• Ability to collaborate with project team members and client entities, demonstrating the leadership capabilities to ensure a successful project
• Excellent written and oral skills are required
• P.E. license is not required, but preferred

Travel Requirements

• Travel: Yes
• Percent of Time: 10%

A Vehicle will be provided, and when travelling a per diem will be issued

• Competitive compensation plus daily Per Diem
• Career and Educational advancement
• Full benefits (medical, dental, vision)
• Ability to work on fun and challenging projects

Position Description

Immediately hiring a Permanent Full Time Senior Level Diesel Technician to support our Truck Fleet at Ryder in Youngstown, Ohio

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $29.50 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $2500 at 30 days and $2500 at 90 days
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: Second Shift 12:30 pm – 9:00 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Spots are filling fast — apply now to secure your spot.

Call or text “Youngstown” to9 to speak with a recruiter today.

We have all the benefits other shops do without the wait!

• 
  
• Annual Merit Pay Increases Every Year
  
  
• On the Job Paid Training
  
  
• Medical, Dental, Vision, 401 K etc. Start at 30 Days
  
  
• We love our Ryder babies and offer 12 weeks of PAID Maternity Leave for qualifying employees (eligibility requirements, including work tenure, apply)
  
  
• Paid Time Off Starts Accruing at DAY ONE with 80 hours per year
  
  
• Additional Day Off for U.S. Military Veterans
  
  
• 401 K offers a company match
  
  
• HIGH VALUED Stock at 15 % Employee Discount
  
  
• PPE, UNIFORMS, AND BOOT ALLOWANCE PROVIDED
  
  
• Ryder Top Technician Recognition Programs rewards 12 Top Techs each year with Cash Prizes from $250 to $50,000!
  
  
• Technician Tuition Repayment Program up to $5,000! Ask your recruiter about it today!
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

\#Techhbc

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Basic diagnostics and repairs, including AC and electrical systems, required
  
  
• Three (3) years or more relevant work experience, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• All other certification as required by location, required
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• All other certification as required by location, required
  
  
• ADDITIONAL REQUIREMENTS:
  
  
• Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc.
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties including:
  
  
• Performs standard vehicle maintenance
  
  
• Performs preventive maintenance
  
  
• Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable
  
  
• Completes complex and detailed mechanical inspections & repairs with minimal supervision
  
  
• Replaces defective components as instructed
  
  
• Works unsupervised on most tasks
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task.
  
  
• Utilizes key functions of Shop Management System and electronic documentation available.
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT).
  
  
• Acts as mentor for Tech 1 and Tech 2 levels.
  
  
• Demonstrate the ability to access and use internal and external maintenance documents.
  
  
• Other support duties as required to support operations. These could include but are not limited to Service Island support
  
  
• SBTIII trained within 180 days (SBT220)
  
  
• Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days)
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 2 weeks ago (3/4/2026 10:09 AM)

Requisition ID 2

Location (Posting Location) : State/Province OH

Location (Posting Location) : City YOUNGSTOWN

Location (Posting Location) : Postal Code 44509

Category Technicians/Service Employees5

Additional Locations (use this field to indicate if position can be domiciled in several areas) US-OH-WARREN

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000356

Min Pay USD $29.50/Hr.

Max Pay USD $29.50/Hr.

Experience the HCA Healthcare difference where colleagues are trusted, valued members of our healthcare team. Grow your career with an organization committed to delivering respectful, compassionate care, and where the unique and intrinsic worth of each individual is recognized. Submit your application for the opportunity below:Radiology Technologist 

As a Radiology Technologist, you will utilize x-ray to assist in diagnosis and/or treatment while always adhering to state, regulatory, and Radiation Right guidelines. You will perform radiographic procedures and related techniques, producing images for the interpretation by or at the request of a licensed practitioner. You will exercise professional judgement in performance of services and maintain a demeanor complementary to medical ethics. You will provide appropriate patientcare and recognize patient conditions essential for successful completion of the procedure. You will work closely with other healthcare team members to facilitate exceptional patient care and efficient completion of diagnostic studies while also promoting optimal unit operations.  

• You will perform all Diagnostic Radiologic Procedures
• You will Demonstrate technique to produce optimal study 
• You will correctly use all equipment in clinical area, including but not limited to :fluoro, c-arm ,Tomo, and portable units 
• You will interpret physician orders prior to performing exam to ensure optimal study 
• You will refer technique/study issues to Senior Tech/Radiologist as appropriate 
• You will utilize appropriate markers/ID on each exam 
• You will assist radiologist with procedures 
• You will demonstrate sterile technique as appropriate 
• You will prepare patient for exams 
• You will demonstrate awareness of physician supply preferences and/or uses Radiology preference cards 
• You will verbalize indication for various contrast mediums 
• You will provide patient care throughout procedure 
• You will assess patient’s level of understanding regarding procedure to be performed; provide information as needed, at appropriate level for patient 
• You will ensure patient safety throughout exam 

Work Schedule: Thurs-Sun, 1130pm-0000

• Two years’ experience as a Radiologic Technologist in an acute care setting

• Graduate from an accredited Radiology Technology program

• Current Medical Radiologic Technologist (MRT) certification with Texas Medical Board (TMB) 
• Current Basic Life Support (BLS) certification 
• Certified in Radiology by the American Registry of Radiologic Technologists American Registry of Radiologic Technology (ARRT, (R)) 

St. David's Medical Center, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include:

• Comprehensive benefits for medical, prescription drug, dental, vision, behavioral health and telemedicine services
• Wellbeing support, including free counseling and referral services
• Time away from work programs for paid time off, paid family leave, long- and short-term disability coverage and leaves of absence
• Savings and retirement resources, including a 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), Employee Stock Purchase Plan, flexible spending accounts, preferred banking partnerships, retirement readiness tools, rollover support and financial wellbeing counseling
• Education support through tuition assistance, student loan assistance, certification support, dependent scholarships and a partnership with Galen College of Nursing
• Additional benefits for fertility and family building, adoption assistance, life insurance, supplemental health protection plans, auto and home insurance, legal counseling, identity theft protection and consumer discounts

Learn more about Employee Benefits

Note: Eligibility for benefits may vary by location.

St. David’s Medical Center, part of St. David’s HealthCare, is a comprehensive medical facility with three locations: St. David’s Medical Center, Heart Hospital of Austin, and St. David’s Georgetown Hospital. Located in Central Austin, St. David’s Medical Center features a 371-bed acute care hospital and a 64-bed rehabilitation hospital, offering a wide range of inpatient and outpatient services.

The hospital provides a full spectrum of women's services, including a renowned Level IV maternity unit, maternal-fetal medicine, and a high-risk maternal and neonatal transport team. It also boasts the region’s largest Level IV Neonatal Intensive Care Unit and offers outpatient breast imaging services through Solis Mammography, which is situated on-site. Additionally, the facility includes a 24-hour emergency department and a comprehensive stroke center.

St. David’s Medical Center specializes in treating high-acuity surgical patients, offering complex procedures such as spine surgeries, total joint replacements, advanced surgical oncology, bariatric surgery, and general surgery. It is also home to the esteemed Texas Cardiac Arrhythmia Institute. The hospital has earned accreditation from the American Nurses Credentialing Center (ANCC) as a Magnet® hospital, the highest and most prestigious distinction a healthcare organization can achieve for nursing practice and quality patient care.

HCA Healthcare has been recognized as one of the World’s Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses. 

If you find this opportunity compelling, we encourage you to apply for our Radiology Technologist opening. We promptly review all applications. Highly qualified candidates will be directly contacted by a member of our team. We are interviewing - apply today!

We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.