Material Handler Example Jobs Remote Jobs in Usa

Category: Transportation and Logistics

Job Location: 4650 Ulmerton Rd., Clearwater, Florida

Position Type: Full-Time/Regular

Job Description:

• The ability to locate and deliver building materials to job sites in a safe and efficient manner.
• Perform pre and post DOT truck inspection.
• Properly secure load on truck / trailer.
• Daily maintenance and cleanliness of truck.
• Safely operate assigned equipment: i.e. crane, conveyor, tractor - trailer, forklift, piggyback.
• Report any unsafe job site or injury immediately to supervisor.
• Job site supervision of material handler on roof top as needed.
• Strong customer service skills.
• Pre and post photographs of job site.
• Customer signature on sales orders at job sites.

Required Skills:

• Valid Class A or Class B license.
• Must pass all DOT requirements including physical examination and drug screen.
• Must have a clean motor vehicle record.
• The ability to lift 80 lbs. repeatedly.
• The ability to walk on roofs and other un-even surfaces.

Job Category: Thrift Stores - all positions

Requisition Number: SOUTH022796

Full-Time

South San Francisco, CA 94080, USA

BACK ROOM PROCESSOR / MATERIAL HANDLER

HOURLY RATE: $18.07 - FULL TIME WITH BENEFITS

ABOUT THE ARC

The Salvation Army (TSA) Adult Rehabilitation Center (ARC) is a no-fee program to assist men & women in their journey to complete our rehabilitation program. We are grateful for the contributions our valued employees make toward the maintenance and effectiveness of the programs. The organization is indebted to and dependent on the diligence and devotion of its employees.

ABOUT OUR RETAIL TEAM

Become part of the dedicated Retail/Production Team at The Salvation Army! Together we can continue to serve and impact our local community, through the commitment to \"Do The Most Good\" at our Santa Rosa Thrift Store which supports the Adult Rehabilitation Program. This is an opportunity to promote a positive experience, problem-solving and teamwork skills, while contributing to the success of our Program and its participants.

EMPLOYEE BENEFITS OFFERED

• Opportunity for career growth
• Paid time off
• Employee Discounts
• Employee Referral Bonuses
• Monthly management incentive bonus
• Medical, Dental, and Vision
• Retirement Plan
• AFLAC
• Employee Assistance Program (EAP)

ESSENTIAL JOB DUTIES:

• Sort product efficiently and properly according to the standard of TSA policy.
• Provide Quality Assurance by inspecting products for defects and damages.
• Identify product correctly and direct to proper department for processing.
• Collecting merchandise from the distribution center and safely transporting materials.
• Follow safety measures established and maintained by TSA policy and government regulations.
• Maintain confidentiality as needed and required for the operation of the total program.
• Other written or verbal duties as may be assigned, from time to time by the Production Manager, or their designated representative.

QUALIFICATIONS:

• High School graduate or equivalent.
• Demonstrated competency in skill area as indicated by verifiable training and/or experience.
• Ability to read and write and to understand and follow both written and verbal instructions.

PHYSICAL REQUIREMENTS:

• Ability to sit, walk, stand, bend, squat, climb, kneel, and twist on an intermittent or continuous basis.
• Ability to grasp, push, pull objects
• Ability to lift up to 75 lbs.
• Ability to perform various repetitive motion tasks.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Quad is seeking Saddle Stitch Operators for the Lomira, WI plant. Experience with Muller Martini 12-40 pocket machines or Goss 855's with 40 pocket capabilities is highly desirable . Will consider candidates that have run other types of Saddle Stitch equipment as well .

At Quad, the wage range for a Saddle Stitch Operator is between $19.25 - $24.25 / hr. depending on experience. You have immediate opportunities to advance – driving you to be better than yesterday. As your career progresses, there are multiple upward paths available, as we are continuously looking for our next group of leaders to excel within the organization.

Job Duties include but are not limited to:

• Operate machine effectively and safely according to standards to ensure a quality product.
• Perform and document preventative and routine maintenance as needed or assigned.
• Make ready the stacker, tiers, mail head, mail control.
• Make ready and run all aspects of the saddle stitcher (pockets, gatherer, stitcher heads, in feed, trimmer, mail table, and mail head, etc.…).
• Make-ready and run demographic and inkjet.
• Fill in for other master operators when needed.
• Assist other master operators with start-ups as possible when their line is down.
• Support material handlers during continuous and self-supported running (including mail-sacking, skid stacking, pocket filling, cover filling, etc.) and give work direction during downtime and clean-up.
• Read and understand binding instructions, mailing instructions, and support the BCS system.
• Ensure proper functioning of safety devices (i.e. guards, stop buttons)
• Maintain a safe and clean work environment.
• Perform additional tasks as needed or assigned. 

Qualifications

• Demonstrated skill in mechanics/mechanical aptitude.
• Ability to read and interpret binding/mailing instructions and operating/maintenance manuals.
• Knowledge of department safety practices.
• Good understanding of all Bindery functions/procedures.
• Good understanding of the co-palletization process, demographics, and selective binding processes.
• Good understanding of primary causes and remedies for various quality problems.
• Ability to recognize, identify, analyze, and communicate problem situations and/or factors.
• Basic computer skills including a good understanding of the BCS System.
• Willingness to move to other machines.
• Willingness to work overtime on unscheduled days.
• Good organizational and time management skills.
• Strong communication skills; both oral and written.
• Ability to work easily and productively with others and with minimal supervision.
• You will work a compressed 3 and 4-day work week geared toward balancing work and family life (12-hour shift (either 7 a.m. - 7 p.m. or 7 p.m. - 7 a.m.) including weekends, and holidays). 
• Essential functions of this job include the following: the ability to lift 10-15 pounds continuously, the ability to lift up to 70 pounds occasionally, stand for long hours, use hands and wrists continuously in controlled movement, receive and follow instructions and use vision to identify defects.

We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.

Quad is proud to be an equal opportunity employer. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.

Drug-Free Workplace

Quad is seeking Saddle Stitch Operators for the Lomira, WI plant. Experience with Muller Martini 12-40 pocket machines or Goss 855's with 40 pocket capabilities is highly desirable . Will consider candidates that have run other types of Saddle Stitch equipment as well .

At Quad, the wage range for a Saddle Stitch Operator is between $19.25 - $24.25 / hr. depending on experience. You have immediate opportunities to advance – driving you to be better than yesterday. As your career progresses, there are multiple upward paths available, as we are continuously looking for our next group of leaders to excel within the organization.

Job Duties include but are not limited to:

• Operate machine effectively and safely according to standards to ensure a quality product.
• Perform and document preventative and routine maintenance as needed or assigned.
• Make ready the stacker, tiers, mail head, mail control.
• Make ready and run all aspects of the saddle stitcher (pockets, gatherer, stitcher heads, in feed, trimmer, mail table, and mail head, etc.…).
• Make-ready and run demographic and inkjet.
• Fill in for other master operators when needed.
• Assist other master operators with start-ups as possible when their line is down.
• Support material handlers during continuous and self-supported running (including mail-sacking, skid stacking, pocket filling, cover filling, etc.) and give work direction during downtime and clean-up.
• Read and understand binding instructions, mailing instructions, and support the BCS system.
• Ensure proper functioning of safety devices (i.e. guards, stop buttons)
• Maintain a safe and clean work environment.
• Perform additional tasks as needed or assigned. 

Qualifications

• Demonstrated skill in mechanics/mechanical aptitude.
• Ability to read and interpret binding/mailing instructions and operating/maintenance manuals.
• Knowledge of department safety practices.
• Good understanding of all Bindery functions/procedures.
• Good understanding of the co-palletization process, demographics, and selective binding processes.
• Good understanding of primary causes and remedies for various quality problems.
• Ability to recognize, identify, analyze, and communicate problem situations and/or factors.
• Basic computer skills including a good understanding of the BCS System.
• Willingness to move to other machines.
• Willingness to work overtime on unscheduled days.
• Good organizational and time management skills.
• Strong communication skills; both oral and written.
• Ability to work easily and productively with others and with minimal supervision.
• You will work a compressed 3 and 4-day work week geared toward balancing work and family life (12-hour shift (either 7 a.m. - 7 p.m. or 7 p.m. - 7 a.m.) including weekends, and holidays). 
• Essential functions of this job include the following: the ability to lift 10-15 pounds continuously, the ability to lift up to 70 pounds occasionally, stand for long hours, use hands and wrists continuously in controlled movement, receive and follow instructions and use vision to identify defects.

We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.

Quad is proud to be an equal opportunity employer. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.

Drug-Free Workplace

Job Summary: Perform maintenance, diagnosis, and repairs in the field, on customer owned or Altorfer rental lift trucks/forklifts/material handlers, Caterpillar, and other allied type construction equipment.

• Provide exceptional service to our customers by performing maintenance, diagnosis, and repairs on allied type construction and lift truck equipment.

• Assist in the decision if equipment needs to be transported into the shop to complete repairs.
• Establish and maintain service-oriented working relationship with customers.
• Plan and execute the repair of various pieces of rental equipment.
• Provide excellent customer service to all customers.
• Complete service reports and all other paperwork before and after repairs are made.
• May perform other related duties as requested and/or assigned.
• Keep current with industry standards.

• Successful completion of a formal technical training program preferred or a minimum of 2 years of previous related work experience required.
• Previous experience working on electric, diesel engines, hydraulic systems, fuel systems, drivetrain, brake systems, etc. and possess troubleshooting skills.
• Automotive and Industrial Maintenance Technicians encouraged to apply.
• Computer literate and proficient with programs such as Microsoft Word and Outlook required. Knowledge of Cat software preferred.
• Must take initiative, be team oriented and willing to adapt to change.
• Ability to write professional business communication when sending emails, letters, notes, and documenting is required.
• Must be a self-starter, well organized and able to work in a fast-paced environment.
• Ability to follow all safety rules and wear proper safety equipment.
• Excellent customer service skills are needed.
• Must be able to safely lift 75lbs, bend, twist, and climb.
• Must possess a Class C or higher commercial driver's license with clean driving record. This includes no more than 2 minor violations within the past 3 years and no major violations within the past 5 years (Motor Vehicle Report will be performed on final candidate).

This position will work in the field/shop environment and at Customer jobsites. May on a continuous basis carry, bend, and lift; up to 75 lbs. Will be required to wear appropriate safety equipment (IE- steel toed boots, hard hat, safety glasses with side shields, hearing protection, cut resistant gloves, etc.) for a given situation. The noise level in the work environment is usually moderate to high. Must be flexible to work varying schedules and hours as needed. Travel between locations is required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and the opportunity to work with a remarkable team of people.

We are looking for a skilled Production Supervisor to lead a team of 30+ operators. You will manage the daily production schedule to meet takt time, ensure continuous flow with minimal rework, and remove constraints to optimize production. As a leader, you'll provide training, feedback, and support to team members while modeling expected behaviors. You will solve problems using tools like 5 Whys and work with cross-functional teams to implement root cause solutions. Additionally, you'll drive continuous improvement, communicate production plans, and uphold high standards for attendance, safety, quality, and productivity, while facilitating the training of new employees.

Job Responsibilities

• Oversee and manage a production line of 30+ operators
• Ensure daily production schedules meet takt time requirements
• Maintain real-time public visual records of production status
• Proactively identify and address constraints to optimize workflow
• Ensure continuous production flow with appropriate resources and minimal rework
• Lead by example, modeling expected behaviors and fostering a positive work environment
• Provide team members with the right balance of challenge, support, training, and feedback for success
• Understand and manage all skills, tasks, and time requirements for production activities
• Use problem-solving tools like 5 Whys and KT to identify and address issues
• Collaborate with cross-functional teams (material handlers, process engineering, production scheduling) to solve problems
• Identify root causes and develop solutions to resolve production challenges
• Drive continuous improvement initiatives and ensure execution with the production team
• Communicate production plans, updates, and corrective actions effectively
• Address attendance, safety, quality, and productivity concerns with the team
• Lead training for new employees to ensure they are prepared for success

Job Skills & Qualifications

• 3+ years of experience in a manufacturing environment
• Proven experience in managing and leading teams
• Strong analytical, problem-solving, and decision-making skills
• High-energy, hands-on leader who leads by example
• Proficient in MS Office
• Excellent communication and presentation skills
• Experience in building or leading production or station teams
• Strong written and verbal communication abilities
• Minimum 1 year of employment with BLOX preferred
• Participation in BLOX Leaders in Training program preferred

We are looking for a highly motivated and results-driven Production Manager with extensive experience in flexographic (flexo) printing. This is a non-negotiable requirement—candidates without hands-on flexo printing experience will not be considered.

The Production Manager will oversee daily operations of the flexo label production floor, ensuring efficiency, quality, safety, and team leadership across all shifts.

• Oversee and manage all aspects of flexo label printing operations
• Lead production scheduling to ensure on-time delivery and maximum machine utilization
• Supervise, train, and support press operators, material handlers, and other production staff
• Implement and enforce strict quality control and safety procedures
• Troubleshoot press issues and identify process improvements
• Collaborate with prepress, sales, and customer service teams to meet client expectations
• Monitor KPIs and drive continuous improvement initiatives
• Maintain equipment and coordinate preventative maintenance schedules
• Ensure compliance with company policies and industry regulations

Mandatory: Flexographic (Flexo) Printing Experience – No Exceptions

• Minimum 5 years of hands-on experience in flexographic printing (narrow web preferred)
• Prior supervisory or management experience in a printing or manufacturing environment
• Strong technical knowledge of flexo presses, substrates, inks, and finishing equipment
• Excellent leadership, organizational, and problem-solving skills
• Ability to manage multiple priorities in a fast-paced, deadline-driven environment
• Proficient with production software and Microsoft Office
• Strong communication skills and a commitment to team development

• Experience with Lean Manufacturing or Six Sigma
• Familiarity with ISO or other quality systems
• Bilingual (English/Spanish) is a plus

• Competitive salary and benefits package
• Opportunity to lead and grow with a global industry leader
• Collaborative and innovative work environment
• Commitment to training and professional development

Selection Procedure Applications will be screened, and those candidates whose backgrounds best match the requirements of the position will be invited to participate in a competitive examination process, which may include any combination of the following: Training & Experience evaluation (T&E), job-related performance exercise, and technical/oral appraisal interview.

Examination procedures are subject to change as deemed necessary by the Director of the Personnel Commission.

PUSD Classification Salary Range: $34.68
- $44.39 per hour Anticipated Hiring Salary Range: $34.68 per hour (step 1)
- $40.22 per hour (step 4) Candidates who pass all of the examination processes are ranked on an eligibility list according to their score(s).

Selection for the position will be made from among the top three (3) ranks of candidates.

The eligibility list will be used for hiring purposes in other vacancies in the same, or equivalent, job classification and will be active for six (6) months (Merit Rule 50.100.1).

The Current vacancy is 8 hours per day, 12 months per year, located at the Facilities, Maintenance, & Operations (FMO) Department.

PURPOSE STATEMENT: The job of Lead HVAC & Refrigeration Technician is done for the purposes of providing journey-level skilled work in the installation, maintenance, and repair of air conditioning, heating; installing, managing, and repairing chilled water systems, chillers, boilers; reviewing work requests; assigning and leading the work of other technicians; conducting scheduled maintenance and repair surveys; inspecting completed work; ensuring completion of projects in accordance with trade standards; providing information on the operation of HVAC systems; and supporting other skilled trades in completing work assignments.

This job reports to the Maintenance Supervisor.

ESSENTIAL FUNCTIONS: Analyzes blueprints, schematics, and drawings for existing and proposed HVAC systems for the purpose of identifying the location of new and existing systems and determining the efficient installation of additional equipment/systems.

Confers with immediate supervisor and assists with the coordination of day-to-day activities (e.g.

periodic lubrication; filter cleaning; changing belts, repairing system leaks, checking water tower components, trouble/issues phone call response, etc.) for the purpose of ensuring the proper and efficient maintenance and repair of District HVAC.

Coordinates with administration and other trades for the purpose of completing projects/work orders efficiently.

Coordinates personnel regarding procedures and/or status of work orders (e.g.

establishing work schedules, reviewing processes to be undertaken, etc.) for the purpose of providing direction and information for decision-making, taking appropriate action, and/or complying with health and safety regulations.

Diagnoses causes of problems and/or failures in heating/air conditioning (e.g.

blowers, filters, the flow of condenser water, water treatment system, variable air volume (VAV) systems, and pumps, etc.) for the purpose of identifying equipment and/or systems repair and replacement needs.

Installs electrical HVAC system components (e.g.

alarms, switches, timers, service disconnects, relay, controllers, variable frequency drive (VFD), etc.) for the purpose of providing enhanced and/or upgraded capabilities.

Estimates materials and/or equipment needed to initiate/complete work projects for the purpose of ensuring timely implementation and completion of projects.

Fabricates equipment parts (e.g drain pans, repiping, reducting, etc.) for the purpose of meeting specialty needs and/or replacing discontinued or unavailable parts.

Implements assigned programs and/or projects (e.g.

inspection schedules, preventive maintenance programs, new District projects, work orders, etc.) for the purpose of ensuring optimal HVAC operation and conformance to established guidelines.

Informs personnel regarding procedures and/or status of work orders for the purpose of providing information for making decisions, taking appropriate action, and/or complying with health and building regulations.

Inspects completed work (e.g.

heating units, building exhaust fans, ventilation units, repair of gas heaters and boilers, etc.) for the purpose of ensuring the quality of work standards are met and identifying preventive maintenance requirements.

Installs heating/air conditioning equipment and systems (e.g.

boilers, chilled water systems, etc.) for the purpose of providing enhanced and/or upgraded HVAC capabilities.

Maintains a variety of files and records (e.g.

time sheets, inventory, work orders, labor/material estimates, equipment repair manuals, service records, etc.) for the purpose of providing up-to-date references and audit trail.

Manages operation and performance records (e.g.

periodic lubrication schedules, heating and cooling performance, diagnosis of electrical systems, testing of refrigerant and condensation systems, etc.) for the purpose of ensuring timely review and assessment.

Monitors contract work (e.g.

coordination of contractor work schedules and performance, etc.) for the purpose of ensuring contract terms are fulfilled and work standards are met.

Oversees and coordinates assigned personnel regarding procedures, the status of work orders, and the day-to-day activities and operations (e.g.

establishing work schedules, reviewing processes to be undertaken, etc.) for the purpose of ensuring that assignments are completed in a safe, proper, and timely manner, maximizing the efficiency of the workforce.

Participates in meetings, workshops, and training (e.g.

new employee training, 3rd party contractor meeting, maintenance department meetings, etc.) for the purpose of conveying, gathering information, offering recommendations required to complete HVAC and training personnel.

Procures equipment and supplies (e.g.

overseeing inventory requirements, etc.) for the purpose of maintaining the availability of required items in order to complete jobs efficiently.

Responds to emergency situations during and after hours for the purpose of resolving immediate operational and safety concerns.

Tests and repairs heating and air conditioning systems and components; swimming pool equipment (e.g.

braze or solder tubing; charge systems with refrigerant gas; condensers, valves and coils, piping, boilers, air handlers, motors, etc.) for the purpose of providing solutions for HVAC system operation for a safe and comfortable work/learning environment.

OTHER FUNCTIONS: Performs other related duties as assigned for the purpose of ensuring the efficient and effective functioning of District’s HVAC and general maintenance.

EXPERIENCE: Job related experience with increasing levels of responsibility is required.

EDUCATION: No specific education is required.

EQUIVALENCY: Any combination equivalent to three (3) years of journey-level experience in the air conditioning, heating and refrigeration field, including one (1) year with the responsibility to lead/supervise the work of others.

SKILLS, KNOWLEDGE, AND ABILITIES: SKILLS are required to perform multiple, technical tasks with a need to occasionally upgrade skills in order to meet changing job conditions.

Specific skill-based competencies required to satisfactorily perform the functions of the job include: adhering to safety practices and procedures; analyzing data; diagnosing equipment malfunctions; estimating required resources; inspecting buildings and/or grounds; inspecting equipment; operating job-related equipment; preparing working drawings; reading blueprints and schematics; DDC programming and monitoring; and operating trade software.

KNOWLEDGE is required to perform basic math, including calculations using fractions, percents, and/or ratios; read technical information, compose a variety of documents, and/or facilitate group discussions; and analyze situations to define issues and draw conclusions.

Specific knowledge based competencies required to satisfactorily perform the functions of the job include: function and operation of heating, cooling; Direct Digital Controls (DDC); materials, tools, and methods used for repair; electrical and air conditioning terms and materials; principles of direction and training; indoor air monitoring equipment and interpretation of resulting data; standards for design and construction; air conditioning and heating codes; electrical and air conditioning systems, circuitry, terms, and materials; hazards and safety precautions; codes/laws/rules/regulations/policies; and school safety and security practices.

ABILITY is required to schedule activities, meetings, and/or events; gather, collate, and/or classify data; and consider a wide variety of factors when using equipment.

Flexibility is required to work with others in a variety of circumstances; work with data utilizing defined but different processes; and operate equipment using a variety of standardized methods.

Ability is also required to work with a wide diversity of individuals; work with a variety of data; and utilize a wide variety of types of job-related equipment.

Problem solving is required to analyze issues and create action plans.

Problem solving with data frequently requires independent interpretation of guidelines; and problem solving with equipment is moderate to significant.

Specific ability based competencies required to satisfactorily perform the functions of the job include: training and directing assigned staff; collaborating with staff, administration, contractors, and students; adapting to changing work priorities; dealing with frequent interruptions; displaying mechanical aptitude; meeting deadlines and schedules; organizing tasks; working as part of a team; working extended hours; heavy lifting; working with chemicals; working around and with machinery having moving parts; and working at heights.

RESPONSIBILITY: Responsibilities include working independently under broad organizational guidelines to achieve unit objectives; directing other persons within a small work unit; tracking budget expenditures.

Utilization of some resources from other work units is often required to perform the job's functions.

There is a continual opportunity to impact the organization’s services.

LICENSES AND OTHER REQUIREMENTS: Required Testing Certificates Pre-Employment Proficiency Test Type I and Type 2 EPA Technician Certification Valid Driver’s License Continuing Educ./Training Clearances Mandated Reporter Training Criminal Background Clearance Physical Capacities Test Clearance Fingerprinting and TB Clearance WORKING ENVIRONMENT: The usual and customary methods of performing the job's functions require the following physical demands: significant lifting, carrying, pushing, and/or pulling, frequent climbing and balancing, frequent stooping, kneeling, crouching, and/or crawling and some fine finger dexterity.

The job is performed under some temperature extremes and under conditions with some exposure to risk of injury and/or illness.

Indoor and outdoor work environment.

Driving a vehicle to conduct work.

Regular exposure to fumes, dust, and odors.

HAZARDS: Working around and with machinery having moving parts.

Working at heights.

Working with and or around high voltage.

Working with equipment operating under high pressure.

The Poway Unified School District (PUSD) is an equal opportunity employer/program and is committed to an active Nondiscrimination Program.

PUSD does not discriminate on the basis of race, color, national origin, sex, sexual orientation, ethnic group identification, ancestry, religion, gender, gender identification, mental or physical disability.

For more information, please contact the Title IX/Equity Compliance Officer, Associate Superintendent of Personnel Support Services, Poway Unified School District, 15250 Avenue of Science, San Diego, CA 92128-3406 Compensation details: 34.68-44.39 Hourly Wage PI1363adc7c9be-25448-39868182

Are you interested in local agriculture, farmers markets and food-access? Do you love working outside with the public?The Renton Farmers Market is hiring for seasonal Farmers Market Laborer positions to help with hands-on operations of the Market.

Under the direction of the Farmers Market Coordinator, maintain and support the onsite, weekly operations of Renton Farmers Market (RFM). Assist with setup and take down of equipment and materials at RFM each Market Day. Work every Tuesday starting June 3 through September 30, 2025 for 8-10 hours each Market Day, with occasional additional hours and days for pre- and post-Market Day duties and special projects.

SUPERVISION:
Reports To: Farmers Market Coordinator
Supervises: None

ESSENTIAL FUNCTIONS:

• Set up and take down equipment and materials for Market and vendor operations.
• Make sure the market area is clean throughout the day and at the end of the market, including trash, compost and recycling bins.
• Assist with operations of the Supplemental Nutrition Assistance Program (SNAP), SNAP Match and other food assistance programs at the Market.
• Work with Farmers Market Coordinator, Market staff and volunteers to help ensure that Market operations run smoothly.
• Help ensure Market policies are followed and check that vendors are complying with laws and regulations of relevant agencies such as City of Renton, Public Health-Seattle & King County and Washington State Department of Agriculture.
• Provide the highest level of customer service to shoppers, vendors, and community partners.
• Assist with end-of-day bookkeeping, vendor invoicing, and deposit reconciliation processes as needed.
• Assist with clerical support duties and other related tasks as needed.
• Assist in maintaining program records and databases as needed.

EDUCATION, EXPERIENCE AND OTHER REQUIREMENTS:

• Successfully pass a required background check.
• Current CPR and first aid certification or ability to obtain one upon employment.
• Food Handler's Permit or ability to obtain one upon employment.
• Valid Driver's License.
• Successful passing of a required driving record check.
• Ability to work all Market days (18).

COMPETENCY REQUIREMENTS:

• Administer minor First Aid and CPR to a person's level of training.
• Ability to handle conflict and solve problems using tact, patience, and courtesy.
• Ability to respond appropriately in emergency situations.
• Demonstrate knowledge of safety guidelines and practices.
• Establish and maintain effective working relationships with staff, the community and program participants.
• Follow instructions, both written and verbal.
• Understand RFM operations and mission and be able to effectively communicate these to the public and consistently represent it within the work environment.
• Work with diverse groups of people in a tactful, effective, and respectful manner.

PHYSICAL DEMANDS:

• Bending, stretching, and standing for extended periods
• Communicate with City employees, Market patrons, shoppers and vendors.
• Drive to offsite locations to perform essential functions.
• Lifting and carrying of up to 50 pounds required.
• Move throughout City facilities and buildings.
• Operate a computer and other office equipment.

WORK ENVIRONMENT:

• Work evenings, weekends, and/or holidays as assigned.
• Work is performed indoors and outdoors in all weather conditions on location at Piazza and Gateway Parks.

Approved reasonable accommodation requests will be made to enable individuals with disabilities to perform the essential functions of the job.

The City of Renton embraces a diverse and inclusive workforce and prides itself on promoting collaboration and teamwork in a positive environment while providing high quality services to the community. For more information about the City of Renton, please visit the following website: Why Renton?

The City of Renton has adopted an anonymous application process that prevents hiring managers from seeing personal identifiers, including candidates' names, addresses, and other similar information. This eliminates the possibility of unintentional or implicit bias during the screening of applications. For that reason, you will not have the ability to attach any documents to your application, including a cover letter or resume. Please make sure to submit a complete, detailed, and updated job application.

Recruitment Process:

The screening process will include a review of minimum qualifications and applicants selected for an interview will be contacted by the hiring manager via email and/or phone. At minimum, this position will be subject to a standard criminal background check. This position requires driving and is also subject to a driving record check from the WA State Dept of Licensing (or other state equivalent). Driving records will be evaluated based on a points system depending on the infraction and severity.

Communication from the City of Renton:

E-mails from and/or should be placed on your safe domain list to ensure you receive notifications in a timely manner. As a precaution, you may also want to check your junk e-mail folders

CORNBREAD is a fast-casual, fast-paced, farm-to-table, fun-to-work-at restaurant focusing on authentic soul food and the use of innovative technology to provide a unique and family-friendly dining experience. We’re proud to source all of our ingredients from local farmers and shops. Our food is always fresh because we prepare our meals around the clock with great love and care. Please visit our website at to learn more about our company values. 

Salary Range: $50,000 - $65,000

Job Summary

The General Manager builds a healthy business and protects the culture within their restaurants. In this role, they are expected to operate with a high level of responsibility, quality, ethics, and professionalism while ensuring the operational needs of the restaurant are met. They provide team leadership to all support staff, including Assistant Managers, Crew Chiefs, and restaurant team members. In this role, they ensure consistent and exceptional quality and customer service for all guests.

People & Culture

• Recruit, train, and build a diverse highly functioning team per Cornbread 101 Training Program standards
• Communicate proactively, professionally, and positively with the team and guests
• Follow up consistently to develop and maintain trust
• Demonstrate compassion and care while setting clear expectations and accountability
• Confront, diffuse, and resolve difficult situations in a proactive, fair, and solution-oriented manner
• Coach team to meet and exceed cornbread standards and treat all guests and each other with respect 
• Execute and deliver performance appraisals and merit increase processes for all applicable team members in a fair and equitable manner
• Maintain up-to-date posters, bulletins, and employee communication 
• Maintain low turnover of staff

Health, Safety, & Quality

• Ensure food standard and safety compliance including storage, food specifications, recipes, plating, and garnishes
• Ensure compliance with SOP in the areas of food specifications, recipes, plating, and garnishes
• Train Team Members on food handling techniques including hygiene following Cornbread standards
• Develop and maintain a safety program in the restaurant that incorporates a safety committee, safety meetings, and information on the use of safety tools and procedures
• Ensure compliance with all applicable federal, state, and local regulations
• Ensure food is presented well and served at appropriate temperatures, within standard ticket times
• Actively prevent workers comp and guest incidents by ensuring safety in the restaurant
• Cornbread is following all of the recommended guidelines provided by the New York & New Jersey Department of Health and the CDC
• Follow all Covid-19 protocols

Hospitality

• Create an environment that is passionate about hospitality
• Educate the team so they are familiar with the story of Cornbread
• Build relationships with guests by communicating warmly and effectively
• Seek opportunities to connect with guests on the floor
• Ensure the approved guest feedback system is in use and acted upon

Business Management & Growth

• Execute annual financial, local restaurant marketing, guest service, and human resource objectives, strategies, and tactics
• Develop and maintain a labor schedule that is efficient and cost-effective
• Build sales consistently and deliberately by implementing approved marketing and promotional items
• Purchase (POP) materials, posters, and placemats
• Oversee inventory management including PARS adherence, timely ordering, and supply chain management
• Maintain the restaurant structure including but not limited to appliances, equipment, deep cleaning, sanitation practices, indoor and exterior restaurant appearance
• Follow proper cash handling procedures
• Attend all required leadership meetings
• Provide quarterly reports on the state of the business

Qualifications

• Food Service: 4 years of food service experience.
• Years in Mgmt: 3 years min.
• People skills: Dealing with the public and team proactively, professionally, and positively.
• Ownership: Takes initiative, personally drives & takes pride in business.
• Proficiency in technology, writing, reading, and working knowledge of spreadsheets required
• Food Handlers certificate within 30 days or Serv Safe equivalent 
• Ability to lift 30+ lbs and stand for long periods
• Exhibit pride

This job description is not an exhaustive task list of every function of the role, other tasks and job responsibilities as assigned.

Cornbread is an equal-opportunity employer. Cornbread will not discriminate against any applicant for employment on any basis including, but not limited to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, military and/or veteran status, marital status, predisposing genetic characteristics and genetic information, or any other classification protected by federal, state, and local laws.

Provide on-site assistance to participants of all ages with physical, developmental, or emotional disabilities as they integrate into Corvallis Parks and Recreation Department programs. Duties include adapting activities, following inclusion support plans, maintaining a safe environment, and promoting a participant's success in a program. Weekly schedule, assignment and work locations are subject to change. Depending on program assignment, may work under the direction of Recreation Coordinator, Program Site Leader or Recreation Supervisor. These tasks are illustrative only and may include other related duties.

Casual, non-represented, part-time position
Multiple Positions Available
Approximately 30-35 hours per week
Seasonal; June 16 - Aug 29
Monday - Friday between 9-4pm

Orientation week is mandatory

Essential Duties

Assists staff by modifying or adapting program activities to improve integration into existing programs.

Applies concepts based on integration of persons with disabilities into an inclusive recreation setting.

Works collaboratively with coordinators, program leaders and other staff to develop strong internal customer service.

Assists in providing behavior support to participants. Makes adaptions to ensure the participant's successful inclusion into the program.

Demonstrates a positive and supportive attitude towards people with disabilities.

Responds to questions from parents and keeps them informed regarding child's progress and achievements.

Facilitates safe participation with various measures including shadowing, removing of potentially hazardous materials, modifying activities to meet participant needs and providing alternative activities.

Works to create a safe environment for staff and participants. Assesses environment for risks and corrects non-safe conditions. Reports all work-related employee or participant incidents/accidents.

Oversees and assists participants in developmentally appropriate activities such as games, songs, learning activities, fitness activities, social interactions, and arts and crafts projects.

Completes necessary documentation associated with inclusion process.

Maintains confidentiality regarding any medical condition for patrons and follows all rules regarding Health Insurance Portability and Accountability Act (HIPAA).

Works independently and also collaboratively with other program staff.

Participates fully in a variety of Parks and Recreation activities.

The Inclusion Aide does NOT provide transportation nor most personal care such as toileting, wheelchair transfers, diapering, etc.

Acts ethically and honestly; applies ethical standards of behavior to daily work activities and interactions. Builds confidence in the City through own actions.

Conforms with all safety rules and performs work in a safe manner.

Delivers excellent customer service to diverse audiences.

Maintains effective work relationships.

Adheres to all City and Department policies.

Arrives to work, meetings, and other work-related functions on time and maintains regular job attendance.

Inclusion Aides assigned to Osborn Aquatic Center may assist in the water assisting the instructor and participants with various activities within the swim lesson and other aquatic programs. Provides modifications/accommodations for participants, monitors students' safety, and overall facilitates the inclusion of participants with disabilities in aquatic programs.

Education and Experience
Experience in one or more of the following preferred:

• Experience providing inclusion in a recreational or educational environment.
• Experience working directly with individuals with autism spectrum disorder (ASD).
• Experience working with individuals with challenging behaviors.
• Experience in specific areas of recreation site-specific placements including sports, nature programming, general summer camps, afterschool programming, etc.

Qualified applicants must submit an online application located on the City of Corvallis website(click on "Apply" above).

Applications will be accepted until position is filled.

Applicants are encouraged to include a cover letter and resume with the online application; however, resumes will not be accepted in lieu of a completed online application. Late or incomplete applications will not be accepted/considered.

*Please do not include personal or protected information in attached resumes or cover letters, this includes your birth date, age, dates of education, and graduation dates.*

Description

Ready for more than just a job? Build a career with purpose.

At Lactalis in the USA, we're committed to providing meaningful opportunities for our people to learn, grow, and thrive-whether you're just starting your journey with us or looking to take the next step in your career. From day one, we offer the tools and support to help you succeed.

As the world leader in dairy, Lactalis is a family-owned company with over 85,000 pragmatic and ambitious professionals across the globe. Each day, we're proud to produce award-winning dairy products that bring people together.

In the US, we proudly offer an unrivaled house of beloved brands, including Galbani Italian cheeses and ricotta, President specialty cheeses and butters, Kraft natural and grated cheeses, Breakstone's cottage cheese, Cracker Barrel, Black Diamond cheddar, and Parmalat milk. Our yogurt portfolio includes siggi's, Stonyfield Organic, Brown Cow, Oui, Yoplait, Go-Gurt, :ratio, Green Mountain Creamery, and Mountain High, along with a growing family of ethnic favorites like Karoun, Gopi, and Arz.

At Lactalis, we live by our core values-Ambition, Engagement, and Simplicity. We foster a workplace where innovation thrives, diverse perspectives are celebrated, and everyone's unique background and ideas are valued.

Even if you don't meet every qualification, we encourage you to apply. We want to hear about your PASSION, your STORY, and how your EXPERTISE can help us shape the future of dairy.

From your PASSION to ours

Lactalis American Group part of the Lactalis family of companies, is currently hiring a Cooker Operator II-Mozzarella based in Nampa, ID. The Production Operator II - Mozzarella (Cooker) position is responsible for blending product back into the cheese making process while assuring product meets quality standards. Assure product meets quality standards, and assumes responsibility for the operational flow of the Cooker equipment.

From your EXPERTISE to ours

Key responsibilities for this position include:

* Meet efficiency budget levels with maintaining a high quality product.

* Must remove and unload racks of cheese and feed cheese onto conveyors or input lines.

* Stack empty racks for retrieval.

* Accurately complete associated CCP and line operation paperwork while maintaining efficiencies.

* Perform sanitation duties as assigned, and keep work area clean/organized.

* Take immediate corrective action for any product that does not meet quality or product specifications.

* Contribute to continual process improvement and increased performance.

* Participate in internal/external audits and maintain ISO22000/ISO9001/HACCP compliance.

* Attend department meetings and trainings as assigned by supervisor or manager.

From your STORY to ours

Qualified applicants will contribute the following:

Education

* High School Diploma/General Education Degree preferred.

Experience

* Previous employment in a food industry/manufacturing setting is preferred.

Specialized Knowledge

*

Skills / Abilities

* Basic Math Skills required (must be able to calculate averages).

* Frequently required to lift or move 50 LB. and occasionally lift or move 100 LB.

* Must be able to stand for the entire shift with repatative bending, twisting, gripping, lifting, and reaching.

Professional Certifications

* Food Handler or ServSafe preferred but not required

* HACCP Certification preferred but not required

* Safety/LOTO Training preferred but not required

Physical Requirements

* Standing and walking for extended periods (12-hour shifts)

* Frequent lifting of ingredients, tools, or product materials-typically up to 50 lbs; occasional lifting up to 75 lbs may be required depending on equipment and batch size.

* Repetitive movements, including reaching, stirring, scooping, pushing, and pulling.

* Manual dexterity for handling equipment controls, measuring ingredients, and operating tools safely

* Ability to bend, twist, kneel, and climb short ladders or steps to access vats, mixers, or upper equipment components.

* Ability to tolerate hot and humid conditions, as cheese cookers generate significant heat.

Requirements

At Lactalis, we offer a comprehensive Total Rewards Program with a variety of affordable benefits and coverage options. We support insurance costs significantly, contribute generously to retirement plans, and offer Paid Time Off from day one. We are committed to your professional growth, providing training and development opportunities, including Education Reimbursement. Join us and grow your career.

Lactalis is an equal employment opportunity employer. We will not discriminate against applicants with regard to any legally-recognized basis including, but not limited to: veteran status, race, color, religion, sex, national origin, age, marital status, sexual orientation, and physical or mental disabilities. Further, any division of the Company that is an Affirmative Action Employer will comply with all related legal obligations.

Responsible for the operation of the main reception desk at the Aquatic Center. Responds to routine requests for information. Provides customer service to patrons, by telephone, email, and in person. Performs general clerical, cashier, administrative support, and custodial duties. These tasks are illustrative only and may include other related duties.

Part-Time, Flexible Schedule

Casual, non-represented position,

Seasonal; Spring - Summer

Serves as receptionist greeting patrons.Answers phones, routes calls and takes messages.Sends and responds to email and provides requested information.Performs as the first point of contact with the public.
Handles financial transactions for general admission, long-term passes and classes and perform basic mathematical calculations in cashier duties.Closes out cash register at end of shift; counts cash; balances read out; completes daily revenue report from previous day; prepares bank deposit, and performs any other related duties to assure City cash handling procedures are followed in accordance with City accounting policies and internal controls.Responds to routine telephone requests which have standard answers; refers calls and visitors to appropriate staff.Provides departmental administrative support services including but not limited to process and distribute mail and materials; copies and faxes documents; and files.Registers students for lessons and programs. Communicates information regarding programs and content of swimming lessons in response to inquires from the public.Schedules rentals and performs data entry of registration information.Assists with patron control in lobby and entrance area.Cleans areas around reception, in the lobby and entrance.

Cashiers assigned to the concessions trailer takes and prepares food orders for customers, performs concessions trailer opening and closing procedures and assists with stocking concessions trailer inventory. Adheres to proper food-handling procedures.Conforms with all safety rules and performs work is a safe manner.Delivers excellent customer service to diverse audiences.Maintains effective work relationships.Arrives to work, meetings, and other work-related functions on time and maintains regular job attendance.

Qualifications and Skills

Education and ExperienceOne year related experience or education in office/business procedures or related area; or combination of education and experience that provides the employee with the knowledge, skills and abilities to perform the essential functions of the position. Knowledge, Skills and AbilitiesWorking knowledge basic office procedures and techniques for organization and filing. Ability to maintain manual and electronic filing and record-keeping systems.
Working knowledge of business English, spelling, punctuation, basic math, and grammar. Working knowledge of cash register operation and cashier practices that include register balancing. Effective clerical skills, including typing/word processing, filing, and operation of standard office equipment. Effective interpersonal, customer service, communication and telephone skills. Ability to communicate effectively to a variety of audiences and to give and understand oral instructions. Good customer service skills and the ability to interact with groups of all ages, to get along well with coworkers, the public, staff and volunteers and to maintain effective working relationships. Ability to use a computer, and to learn department specific computer hardware and software, to perform the essential functions of the position.

Cashiers assigned to the concessions trailer must have the ability to work in the confined space of a concessions trailer. Ability to enforce safety regulations. Work in a busy environment and handle crowds while answering telephone calls. Special RequirementsCertified in CPR/AED and first aid for professional rescuer.

Cashiers assigned to the concessions trailer must have a current Oregon Food Handler Card.Demonstrable commitment to sustainability.
Ability to pass a pre-employment background check and/or criminal history check.
Demonstrable commitment to promoting and enhancing diversity. The individual shall not pose a direct threat to the health or safety of the individual or others in the workplace.

How to Apply

Qualified applicants must submit an online application located on the City of Corvallis website (click on "Apply" above).

Resumes will not be accepted in lieu of a completed online application. Incomplete applications will not be accepted/considered.

Position is open until filled.

*Please do not include personal or protected information in attached resumes or cover letters, this includes your birth date, age, dates of education, and graduation dates.*

Commercial HVAC and BAS Specialist

Pay: $115,000 to $125,000 plus Bonus

Department: Operations & Maintenance

Location: Tetrad Managed Portfolio (Fort Collins, CO)

Status: Full-time, Monday-Friday, with rotating on-call

Schedule: Monday–Friday with rotating on-call responsibilities

Reports To: Chief Engineer

Position Summary

The Commercial HVAC and BAS Specialist is responsible for overseeing the preventive maintenance, performance, and reliability of mechanical and control systems across Tetrad’s managed portfolio. This position ensures the efficient operation of HVAC systems and environmental controls through proactive oversight, quality assurance, and hands-on technical expertise. In addition to system optimization and vendor coordination, the Specialist manages work orders and performs general maintenance tasks to support day-to-day building operations and tenant needs.

This role provides leadership in maintenance planning, troubleshooting, and system improvement while remaining actively engaged in field operations. The ideal candidate brings strong mechanical and diagnostic skills, a solid understanding of building automation systems, and a high level of customer service. This position requires initiative, precision, and the ability to balance strategic system oversight with responsive, hands-on facility support.

Primary Responsibilities

System Operations & Preventive Maintenance Oversight

· Oversee all preventive maintenance (PM) activities for HVAC systems, ensuring schedules are met, procedures followed, and work is properly documented.

· Evaluate PM programs for effectiveness and recommend updates to improve reliability and extend equipment life.

· Provide field support and technical guidance to facility staff and vendors performing PM and service work.

· Review maintenance reports, identify recurring issues, and develop corrective action plans.

· Conduct quality inspections to ensure equipment is maintained to Tetrad’s operational standards.

Controls & System Optimization

· Support, adjust, and troubleshoot Building Automation and Control Systems (BAS) to maintain occupant comfort and operational efficiency.

· Review control sequences and recommend adjustments to improve system performance.

· Collaborate with contractors and vendors on programming, tuning, and integration of new equipment into control systems.

· Track energy performance and identify opportunities for optimization and cost reduction.

· Maintain networked control hardware, sensors, and system integrity across multiple sites.

Project & Vendor Coordination

· Provide technical oversight during HVAC and controls-related projects, retrofits, and upgrades.

· Coordinate preventive maintenance contracts and ensure vendor work meets defined standards.

· Assist in developing mechanical and controls standards, including documentation, PM templates, and operational benchmarks.

· Support capital planning efforts through system evaluations and lifecycle recommendations.

Customer Service & Collaboration

· Deliver a high level of customer service when interacting with tenants, vendors, and internal teams.

· Communicate effectively with building occupants and staff to minimize disruption during maintenance activities.

· Represent Tetrad’s values of professionalism, integrity, and reliability in all interactions.

· Support the Chief Engineer with staff training, system diagnostics, and operational guidance.

Work Orders & General Maintenance

· Manage and respond to assigned work orders related to HVAC, controls, and general building maintenance in a timely and professional manner.

· Diagnose and resolve mechanical, controls, and facility-related service requests, ensuring minimal disruption to tenants and building operations.

· Perform hands-on general maintenance tasks as needed, including minor mechanical, electrical, plumbing, and building repairs within skill set and safety guidelines.

· Prioritize work orders based on urgency, operational impact, and tenant needs.

· Accurately document completed work, materials used, and follow-up requirements in the work order management system.

· Identify recurring maintenance issues and recommend long-term corrective solutions.

· Coordinate with vendors and internal team members when specialized services or additional support are required.

Emergency & On-Call Response

· Participate in the rotating on-call schedule for after-hours emergencies.

· Respond promptly to critical system issues, including HVAC failures, leaks, or alarms.

· Support emergency preparedness, system recovery, and weather-related response efforts.

Required Qualifications

· High school diploma or GED.

· Minimum 5 years of commercial HVAC service, controls, and mechanical systems experience.

· Strong understanding of HVAC theory, system operation, and control sequences.

· Experience overseeing or performing preventive maintenance programs in commercial environments.

· Proficiency in diagnosing and repairing air handlers, RTUs, chillers, boilers, and related systems.

· Ability to read and interpret mechanical drawings, schematics, and wiring diagrams.

· Excellent communication and customer service skills.

· Valid driver’s license and reliable transportation.

· Ability to lift up to 50 lbs and work in confined spaces, rooftops, and mechanical areas.

· Candidates must be comfortable working in proximity to animals of varying size and temperament.

Preferred Qualifications

· Journeyman HVAC License is preferred.

· Experience with one or more control systems: Johnson Controls, Siemens, Trane, Delta Controls, or comparable BAS platforms.

· Experience with BACnet and Modbus communication protocols.

· OSHA 10 or 30 Certification.

· OEM technical training (Carrier, Daikin, Lennox, or Trane).

· Trade school diploma, associate degree, or equivalent technical training in HVAC, controls, or mechanical systems.

Skills & Competencies

· Strong leadership and organizational skills in managing preventive maintenance programs.

· Advanced mechanical and electrical troubleshooting abilities.

· Excellent communication and customer service orientation.

· Skilled at coordinating contractors, technicians, and vendors.

· Proactive, analytical, and detail-oriented approach to system optimization.

· Commitment to safety, reliability, and high-quality workmanship.

· Demonstrates Tetrad’s values of integrity, accountability, and operational excellence.

This job description outlines the key responsibilities and qualifications for the Commercial HVAC and BAS Specialist role, emphasizing technical expertise, preventive maintenance leadership, system optimization, and responsive facility support across Tetrad’s managed portfolio.

Tetrad Real Estate is an equal opportunity employer committed to promoting diversity and inclusion in the workplace. We welcome applications from all qualified individuals.

As an HVAC Senior Service Technician, you will perform service and maintenance tasks on commercial and / or industrial HVAC equipment. Ability to travel, as needed, for projects.

Compensation

• Wage Range Starting at: $40.00+/hr. based on qualifications & experience

Job Duties

• Perform assigned HVAC maintenance, troubleshooting and repair tasks safely in commercial and industrial settings on various types of air cooled chillers, WSHP’s, cooling towers, split systems, packaged rooftop units, heat pumps, pneumatic, electrical control systems, and other mechanical equipment.
• Complete required electronic documentation daily on a handheld device
• Work independently, and as part of a team, to complete assigned tasks within an allotted time frame
• Perform other related duties or special projects, as assigned

Requirements

• 10 or more years of experience installation, repairing, and troubleshooting commercial HVAC equipment
• Preferred experience with RTU, air handlers, split systems, chilled water, and boiler systems
• EPA Universal certification
• OSHA 10 certification (the company will provide if needed)
• Ability to lead a small crew of technicians and/or assist with technical questions
• Ability to pass a full background, pre-employment drug screen & MVR

Additional Requirements

• Complies and promotes company Safety Policy
• Excellent communication and customer service skills
• Must be able to work independently with and without supervision
• Ability to stand, squat, bend, stoop, and comfortably lift up to 50 lbs
• Familiarity with blueprints, schematics, drawings, and other equipment layout materials

Comprehensive Benefits

• Medical, Vision, Dental
• Basic company-paid life insurance
• Voluntary life insurance for employee, spouse and/or child(ren)
• Basic company-paid accidental death & dismemberment (AD&D)
• Voluntary AD&D
• Company paid short term disability
• Voluntary Long-Term Disability
• Company paid Employee Assistance Program
• 401(k) Plan with several investment options
• Healthcare reimbursement account
• Dependent care reimbursement account
• Vehicle discount purchase programs

Disclaimer

The above statements are intended to describe the general nature and level of work being performed by employees assigned to this job. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Comfort Systems USA (Southeast), Inc. is an equal opportunity employer in all aspects of employment and prohibits discrimination and harassment of any type to all individuals regardless of race, color, religion, sex, sexual orientation, national origin, age, disability, veteran status, genetic information, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, probation, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

We strive to foster a work environment that includes and embraces racial, ethnic and gender diversity and other individual differences. Our commitment to diversity and inclusion helps us attract and retain the best talent, enables employees to realize their full potential, and drives high performance through innovation and collaboration.

Job Description:

The Service Foreman provides field leadership and technical oversight for HVAC and mechanical service work throughout the DC Metro region. This role is responsible for leading service technicians, coordinating daily field operations, ensuring safety and quality standards are met, and serving as the primary field resource for complex troubleshooting and system repairs.

The ideal candidate is an experienced HVAC professional with strong leadership skills, advanced technical knowledge, and a commitment to delivering high-quality service while maintaining strong customer relationships.

Essential Functions:

·       Lead and direct service technicians on daily service assignments and field activities

·       Provide advanced troubleshooting and technical support for commercial HVAC and mechanical systems

·       Coordinate manpower, scheduling priorities, and service execution with service management

·       Oversee service work to ensure quality, efficiency, and compliance with company and safety standards

·       Serve as the field escalation point for complex system issues and customer concerns

·       Perform troubleshooting, repair, and maintenance of HVAC systems including air handlers, rooftop units, chillers, boilers, pumps, and controls

·       Read and interpret blueprints, wiring diagrams, specifications, and technical documentation

·       Ensure accurate completion of service documentation, labor tracking, and material usage

·       Communicate effectively with customers, building engineers, and internal teams

·       Mentor and support technicians to promote skill development and safe work practices

·       Maintain required tools, equipment, and company vehicle

·       Participate in on-call rotation as required

Qualifications and Education:

·       Active HVAC Journeyman or Master License in Maryland (MD), Washington DC, or Virginia (VA) — required

·       Minimum 7+ years of commercial HVAC/service experience preferred

·       Previous leadership or foreman experience strongly preferred

·       Advanced knowledge of commercial HVAC systems and controls

·       Strong troubleshooting and problem-solving skills

·       Ability to lead crews and manage multiple priorities in a fast-paced environment

·       Strong communication and customer service skills

What We Offer:

·       Holaday-Parks, Inc., offers an excellent salary and benefits package—paying 100% of medical/vision/dental, and prescription premiums for employees.

Pay Range:

·       $59-$67 per hour (DOE)

Benefits:

We offer an excellent salary and benefits package—paying 100% of medical/vision/dental and prescription premiums for employee. Holaday-Parks is an Equal Opportunity Employer (EOE), including protected veterans and people with disabilities.

If interested in applying, please submit your cover letter and resume to